Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Frank Li <Frank.li@nxp.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Rui Miguel Silva <rmfrfs@gmail.com>,
	Martin Kepplinger <martink@posteo.de>,
	Purism Kernel Team <kernel@puri.sm>,
	linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Robert Chiras <robert.chiras@nxp.com>,
	"Guoniu.zhou" <guoniu.zhou@nxp.com>
Subject: Re: [PATCH v4 03/13] media: nxp: imx8-isi: Remove unused offset in mxc_isi_reg and use BIT() macro for mask
Date: Fri, 2 May 2025 18:25:13 +0300	[thread overview]
Message-ID: <20250502152513.GG22453@pendragon.ideasonboard.com> (raw)
In-Reply-To: <aBQXfW6dzdyFI1GN@lizhi-Precision-Tower-5810>

On Thu, May 01, 2025 at 08:53:17PM -0400, Frank Li wrote:
> On Tue, Apr 22, 2025 at 12:06:55AM +0300, Laurent Pinchart wrote:
> > Hi Frank,
> >
> > Thank you for the patch.
> >
> > On Tue, Apr 08, 2025 at 05:53:01PM -0400, Frank Li wrote:
> > > Preserve clarity by removing the unused 'offset' field in struct mxc_isi_reg,
> > > as it duplicates information already indicated by the mask and remains unused.
> >
> > The commit message line length limit is normally 72 characters. I can
> > reflow when applying if no other change to the series is needed.
> 
> I remember it is 75 chars. Any document show it is 72. I need correct for
> the other patches also.

You're absolutely right, I don't know where I got the 72 columns limit
from. Please ignore my comment.

> > >
> > > Improve readability by replacing hex value masks with the BIT() macro.
> > >
> > > No functional change.
> > >
> > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> >
> > > ---
> > >  .../media/platform/nxp/imx8-isi/imx8-isi-core.c    | 25 +++++++++++-----------
> > >  .../media/platform/nxp/imx8-isi/imx8-isi-core.h    |  1 -
> > >  2 files changed, 13 insertions(+), 13 deletions(-)
> > >
> > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> > > index 1e79b1211b603..ecfc95882f903 100644
> > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> > > @@ -3,6 +3,7 @@
> > >   * Copyright 2019-2020 NXP
> > >   */
> > >
> > > +#include <linux/bits.h>
> > >  #include <linux/clk.h>
> > >  #include <linux/device.h>
> > >  #include <linux/errno.h>
> > > @@ -247,24 +248,24 @@ static void mxc_isi_v4l2_cleanup(struct mxc_isi_dev *isi)
> > >
> > >  /* For i.MX8QXP C0 and i.MX8MN ISI IER version */
> > >  static const struct mxc_isi_ier_reg mxc_imx8_isi_ier_v1 = {
> > > -	.oflw_y_buf_en = { .offset = 19, .mask = 0x80000  },
> > > -	.oflw_u_buf_en = { .offset = 21, .mask = 0x200000 },
> > > -	.oflw_v_buf_en = { .offset = 23, .mask = 0x800000 },
> > > +	.oflw_y_buf_en = { .mask = BIT(19) },
> > > +	.oflw_u_buf_en = { .mask = BIT(21) },
> > > +	.oflw_v_buf_en = { .mask = BIT(23) },
> > >
> > > -	.panic_y_buf_en = {.offset = 20, .mask = 0x100000  },
> > > -	.panic_u_buf_en = {.offset = 22, .mask = 0x400000  },
> > > -	.panic_v_buf_en = {.offset = 24, .mask = 0x1000000 },
> > > +	.panic_y_buf_en = { .mask = BIT(20) },
> > > +	.panic_u_buf_en = { .mask = BIT(22) },
> > > +	.panic_v_buf_en = { .mask = BIT(24) },
> > >  };
> > >
> > >  /* For i.MX8MP ISI IER version */
> > >  static const struct mxc_isi_ier_reg mxc_imx8_isi_ier_v2 = {
> > > -	.oflw_y_buf_en = { .offset = 18, .mask = 0x40000  },
> > > -	.oflw_u_buf_en = { .offset = 20, .mask = 0x100000 },
> > > -	.oflw_v_buf_en = { .offset = 22, .mask = 0x400000 },
> > > +	.oflw_y_buf_en = { .mask = BIT(18) },
> > > +	.oflw_u_buf_en = { .mask = BIT(20) },
> > > +	.oflw_v_buf_en = { .mask = BIT(22) },
> > >
> > > -	.panic_y_buf_en = {.offset = 19, .mask = 0x80000  },
> > > -	.panic_u_buf_en = {.offset = 21, .mask = 0x200000 },
> > > -	.panic_v_buf_en = {.offset = 23, .mask = 0x800000 },
> > > +	.panic_y_buf_en = { .mask = BIT(19) },
> > > +	.panic_u_buf_en = { .mask = BIT(21) },
> > > +	.panic_v_buf_en = { .mask = BIT(23) },
> > >  };
> > >
> > >  /* Panic will assert when the buffers are 50% full */
> > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> > > index 9c7fe9e5f941f..e7534a80af7b4 100644
> > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> > > @@ -114,7 +114,6 @@ struct mxc_isi_buffer {
> > >  };
> > >
> > >  struct mxc_isi_reg {
> > > -	u32 offset;
> > >  	u32 mask;
> > >  };
> > >

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2025-05-02 15:25 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-08 21:52 [PATCH v4 00/13] media: imx8: add camera support Frank Li
2025-04-08 21:52 ` [PATCH v4 01/13] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI Frank Li
2025-04-08 21:53 ` [PATCH v4 02/13] media: nxp: imx8-isi: Allow num_sources to be greater than num_sink Frank Li
2025-04-08 21:53 ` [PATCH v4 03/13] media: nxp: imx8-isi: Remove unused offset in mxc_isi_reg and use BIT() macro for mask Frank Li
2025-04-21 21:06   ` Laurent Pinchart
2025-05-02  0:53     ` Frank Li
2025-05-02 15:25       ` Laurent Pinchart [this message]
2025-04-08 21:53 ` [PATCH v4 04/13] media: nxp: imx8-isi: Use devm_clk_bulk_get_all() to fetch clocks Frank Li
2025-04-21 21:14   ` Laurent Pinchart
2025-05-02  1:02     ` Frank Li
2025-05-02 15:57       ` Laurent Pinchart
2025-05-08 12:35         ` Frank Li
2025-06-11 14:14           ` Laurent Pinchart
2025-06-17 14:11             ` Rob Herring
2025-06-17 14:29               ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 05/13] media: nxp: imx8-isi: Remove redundant check for dma_set_mask_and_coherent() Frank Li
2025-04-21 21:19   ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 06/13] media: nxp: imx8-isi: Use dev_err_probe() simplify code Frank Li
2025-04-21 21:21   ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 07/13] media: imx8-isi: Add support for i.MX8QM and i.MX8QXP Frank Li
2025-04-21 21:32   ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 08/13] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8QM(QXP) compatible strings Frank Li
2025-04-08 21:53 ` [PATCH v4 09/13] media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different " Frank Li
2025-04-08 21:53 ` [PATCH v4 10/13] media: imx8mq-mipi-csi2: Add support for i.MX8QXP Frank Li
2025-04-21 21:41   ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 11/13] arm64: dts: imx8: add capture controller for i.MX8's img subsystem Frank Li
2025-04-21 21:46   ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 12/13] arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek Frank Li
2025-04-08 21:53 ` [PATCH v4 13/13] arm64: dts: imx8q: add camera ov5640 support " Frank Li
2025-04-21 18:44 ` [PATCH v4 00/13] media: imx8: add camera support Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250502152513.GG22453@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=Frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=guoniu.zhou@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=kernel@puri.sm \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=martink@posteo.de \
    --cc=mchehab@kernel.org \
    --cc=rmfrfs@gmail.com \
    --cc=robert.chiras@nxp.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox