From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Frank Li <Frank.Li@nxp.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Rui Miguel Silva <rmfrfs@gmail.com>,
Martin Kepplinger <martink@posteo.de>,
Purism Kernel Team <kernel@puri.sm>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Robert Chiras <robert.chiras@nxp.com>,
"Guoniu.zhou" <guoniu.zhou@nxp.com>
Subject: Re: [PATCH v4 04/13] media: nxp: imx8-isi: Use devm_clk_bulk_get_all() to fetch clocks
Date: Tue, 22 Apr 2025 00:14:38 +0300 [thread overview]
Message-ID: <20250421211438.GN17813@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20250408-8qxp_camera-v4-4-ef695f1b47c4@nxp.com>
Hi Frank,
Thank you for the patch.
On Tue, Apr 08, 2025 at 05:53:02PM -0400, Frank Li wrote:
> Use devm_clk_bulk_get_all() helper to simplify clock handle code.
>
> No functional changes intended.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> .../media/platform/nxp/imx8-isi/imx8-isi-core.c | 46 +++-------------------
> .../media/platform/nxp/imx8-isi/imx8-isi-core.h | 3 +-
> 2 files changed, 6 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> index ecfc95882f903..015350c6f2784 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> @@ -275,11 +275,6 @@ static const struct mxc_isi_set_thd mxc_imx8_isi_thd_v1 = {
> .panic_set_thd_v = { .mask = 0xf0000, .offset = 16, .threshold = 0x7 },
> };
>
> -static const struct clk_bulk_data mxc_imx8mn_clks[] = {
> - { .id = "axi" },
> - { .id = "apb" },
> -};
> -
> static const struct mxc_isi_plat_data mxc_imx8mn_data = {
> .model = MXC_ISI_IMX8MN,
> .num_ports = 1,
> @@ -287,8 +282,6 @@ static const struct mxc_isi_plat_data mxc_imx8mn_data = {
> .reg_offset = 0,
> .ier_reg = &mxc_imx8_isi_ier_v1,
> .set_thd = &mxc_imx8_isi_thd_v1,
> - .clks = mxc_imx8mn_clks,
> - .num_clks = ARRAY_SIZE(mxc_imx8mn_clks),
> .buf_active_reverse = false,
> .gasket_ops = &mxc_imx8_gasket_ops,
> .has_36bit_dma = false,
> @@ -301,8 +294,6 @@ static const struct mxc_isi_plat_data mxc_imx8mp_data = {
> .reg_offset = 0x2000,
> .ier_reg = &mxc_imx8_isi_ier_v2,
> .set_thd = &mxc_imx8_isi_thd_v1,
> - .clks = mxc_imx8mn_clks,
> - .num_clks = ARRAY_SIZE(mxc_imx8mn_clks),
> .buf_active_reverse = true,
> .gasket_ops = &mxc_imx8_gasket_ops,
> .has_36bit_dma = true,
> @@ -315,8 +306,6 @@ static const struct mxc_isi_plat_data mxc_imx8ulp_data = {
> .reg_offset = 0x0,
> .ier_reg = &mxc_imx8_isi_ier_v2,
> .set_thd = &mxc_imx8_isi_thd_v1,
> - .clks = mxc_imx8mn_clks,
> - .num_clks = ARRAY_SIZE(mxc_imx8mn_clks),
> .buf_active_reverse = true,
> .has_36bit_dma = false,
> };
> @@ -328,8 +317,6 @@ static const struct mxc_isi_plat_data mxc_imx93_data = {
> .reg_offset = 0,
> .ier_reg = &mxc_imx8_isi_ier_v2,
> .set_thd = &mxc_imx8_isi_thd_v1,
> - .clks = mxc_imx8mn_clks,
> - .num_clks = ARRAY_SIZE(mxc_imx8mn_clks),
> .buf_active_reverse = true,
> .gasket_ops = &mxc_imx93_gasket_ops,
> .has_36bit_dma = false,
> @@ -386,7 +373,7 @@ static int mxc_isi_runtime_suspend(struct device *dev)
> {
> struct mxc_isi_dev *isi = dev_get_drvdata(dev);
>
> - clk_bulk_disable_unprepare(isi->pdata->num_clks, isi->clks);
> + clk_bulk_disable_unprepare(isi->num_clks, isi->clks);
>
> return 0;
> }
> @@ -396,7 +383,7 @@ static int mxc_isi_runtime_resume(struct device *dev)
> struct mxc_isi_dev *isi = dev_get_drvdata(dev);
> int ret;
>
> - ret = clk_bulk_prepare_enable(isi->pdata->num_clks, isi->clks);
> + ret = clk_bulk_prepare_enable(isi->num_clks, isi->clks);
> if (ret) {
> dev_err(dev, "Failed to enable clocks (%d)\n", ret);
> return ret;
> @@ -414,27 +401,6 @@ static const struct dev_pm_ops mxc_isi_pm_ops = {
> * Probe, remove & driver
> */
>
> -static int mxc_isi_clk_get(struct mxc_isi_dev *isi)
> -{
> - unsigned int size = isi->pdata->num_clks
> - * sizeof(*isi->clks);
> - int ret;
> -
> - isi->clks = devm_kmemdup(isi->dev, isi->pdata->clks, size, GFP_KERNEL);
> - if (!isi->clks)
> - return -ENOMEM;
> -
> - ret = devm_clk_bulk_get(isi->dev, isi->pdata->num_clks,
> - isi->clks);
> - if (ret < 0) {
> - dev_err(isi->dev, "Failed to acquire clocks: %d\n",
> - ret);
> - return ret;
> - }
> -
> - return 0;
> -}
> -
> static int mxc_isi_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -457,11 +423,9 @@ static int mxc_isi_probe(struct platform_device *pdev)
> if (!isi->pipes)
> return -ENOMEM;
>
> - ret = mxc_isi_clk_get(isi);
> - if (ret < 0) {
> - dev_err(dev, "Failed to get clocks\n");
> - return ret;
> - }
> + isi->num_clks = devm_clk_bulk_get_all(dev, &isi->clks);
This prevents validating that the DT contains the expected clocks, which
could cause hard to debug issues. Isn't it a problem ?
> + if (isi->num_clks < 0)
> + return dev_err_probe(dev, isi->num_clks, "Failed to get clocks\n");
>
> isi->regs = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(isi->regs)) {
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> index e7534a80af7b4..bd3cfe5fbe063 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> @@ -169,8 +169,6 @@ struct mxc_isi_plat_data {
> const struct mxc_isi_ier_reg *ier_reg;
> const struct mxc_isi_set_thd *set_thd;
> const struct mxc_gasket_ops *gasket_ops;
> - const struct clk_bulk_data *clks;
> - unsigned int num_clks;
> bool buf_active_reverse;
> bool has_36bit_dma;
> };
> @@ -282,6 +280,7 @@ struct mxc_isi_dev {
>
> void __iomem *regs;
> struct clk_bulk_data *clks;
> + int num_clks;
> struct regmap *gasket;
>
> struct mxc_isi_crossbar crossbar;
>
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2025-04-21 21:14 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-08 21:52 [PATCH v4 00/13] media: imx8: add camera support Frank Li
2025-04-08 21:52 ` [PATCH v4 01/13] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI Frank Li
2025-04-08 21:53 ` [PATCH v4 02/13] media: nxp: imx8-isi: Allow num_sources to be greater than num_sink Frank Li
2025-04-08 21:53 ` [PATCH v4 03/13] media: nxp: imx8-isi: Remove unused offset in mxc_isi_reg and use BIT() macro for mask Frank Li
2025-04-21 21:06 ` Laurent Pinchart
2025-05-02 0:53 ` Frank Li
2025-05-02 15:25 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 04/13] media: nxp: imx8-isi: Use devm_clk_bulk_get_all() to fetch clocks Frank Li
2025-04-21 21:14 ` Laurent Pinchart [this message]
2025-05-02 1:02 ` Frank Li
2025-05-02 15:57 ` Laurent Pinchart
2025-05-08 12:35 ` Frank Li
2025-06-11 14:14 ` Laurent Pinchart
2025-06-17 14:11 ` Rob Herring
2025-06-17 14:29 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 05/13] media: nxp: imx8-isi: Remove redundant check for dma_set_mask_and_coherent() Frank Li
2025-04-21 21:19 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 06/13] media: nxp: imx8-isi: Use dev_err_probe() simplify code Frank Li
2025-04-21 21:21 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 07/13] media: imx8-isi: Add support for i.MX8QM and i.MX8QXP Frank Li
2025-04-21 21:32 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 08/13] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8QM(QXP) compatible strings Frank Li
2025-04-08 21:53 ` [PATCH v4 09/13] media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different " Frank Li
2025-04-08 21:53 ` [PATCH v4 10/13] media: imx8mq-mipi-csi2: Add support for i.MX8QXP Frank Li
2025-04-21 21:41 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 11/13] arm64: dts: imx8: add capture controller for i.MX8's img subsystem Frank Li
2025-04-21 21:46 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 12/13] arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek Frank Li
2025-04-08 21:53 ` [PATCH v4 13/13] arm64: dts: imx8q: add camera ov5640 support " Frank Li
2025-04-21 18:44 ` [PATCH v4 00/13] media: imx8: add camera support Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250421211438.GN17813@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=guoniu.zhou@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kernel@puri.sm \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martink@posteo.de \
--cc=mchehab@kernel.org \
--cc=rmfrfs@gmail.com \
--cc=robert.chiras@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox