Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Vladimir Zapolskiy <vz@mleia.com>
To: Frank Li <Frank.Li@nxp.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	"moderated list:ARM/LPC32XX SOC SUPPORT"
	<linux-arm-kernel@lists.infradead.org>,
	open list <linux-kernel@vger.kernel.org>
Cc: imx@lists.linux.dev
Subject: Re: [PATCH 2/5] ARM: dts: lpc32xx: add sspclk clock for SPI[0,1]
Date: Fri, 14 Nov 2025 01:12:05 +0200	[thread overview]
Message-ID: <6f50997d-5a46-4d89-b011-cbc89785e05f@mleia.com> (raw)
In-Reply-To: <20251029202801.3963952-2-Frank.Li@nxp.com>

Hi Frank.

On 10/29/25 22:27, Frank Li wrote:
> add sspclk clock for SPI[0,1] to fix below CHECK_DTB warning:
>    arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dtb: spi@2008c000 (arm,pl022): clock-names:0: 'sspclk' was expected
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>   arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
> index 9790b0a1d6537..77f210a2152dc 100644
> --- a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
> +++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
> @@ -179,8 +179,8 @@ ssp0: spi@20084000 {
>   				compatible = "arm,pl022", "arm,primecell";
>   				reg = <0x20084000 0x1000>;
>   				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
> -				clocks = <&clk LPC32XX_CLK_SSP0>;
> -				clock-names = "apb_pclk";
> +				clocks =<&clk LPC32XX_CLK_SSP0>, <&clk LPC32XX_CLK_SSP0>;
> +				clock-names = "sspclk", "apb_pclk";
>   				#address-cells = <1>;
>   				#size-cells = <0>;
>   				status = "disabled";
> @@ -203,8 +203,8 @@ ssp1: spi@2008c000 {
>   				compatible = "arm,pl022", "arm,primecell";
>   				reg = <0x2008c000 0x1000>;
>   				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
> -				clocks = <&clk LPC32XX_CLK_SSP1>;
> -				clock-names = "apb_pclk";
> +				clocks = <&clk LPC32XX_CLK_SSP1>, <&clk LPC32XX_CLK_SSP1>;
> +				clock-names = "sspclk", "apb_pclk";
>   				#address-cells = <1>;
>   				#size-cells = <0>;
>   				status = "disabled";

This one I won't apply now, since there is another much earlier sent
and discussed change:

https://lore.kernel.org/all/20220311093800.18778-4-singh.kuldeep87k@gmail.com/

The thing is formally it's a DT ABI change. I'm pro to apply the change, but
let me say I need to get a bit more of courage to resend it and to push it
through as an incredibly unlikely but still potentially harmful change to
some unknown user.

-- 
Best wishes,
Vladimir

  reply	other threads:[~2025-11-13 23:12 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-29 20:27 [PATCH 1/5] ARM: dts: lpc32xx: add bus surfix for simple-bus Frank Li
2025-10-29 20:27 ` [PATCH 2/5] ARM: dts: lpc32xx: add sspclk clock for SPI[0,1] Frank Li
2025-11-13 23:12   ` Vladimir Zapolskiy [this message]
2025-10-29 20:27 ` [PATCH 3/5] ARM: dts: lpc3250-ea3250: add key- prefix for gpio-keys Frank Li
2025-11-14  0:02   ` Vladimir Zapolskiy
2025-10-29 20:28 ` [PATCH 4/5] ARM: dts: lpc3250-phy3250: add at25 required properties Frank Li
2025-11-13 23:47   ` Vladimir Zapolskiy
2025-11-14 16:14     ` Frank Li
2025-11-14 16:32       ` Vladimir Zapolskiy
2025-10-29 20:28 ` [PATCH 5/5] ARM: dts: lpc32xx: update #address-cells of arm,pl175 to 2 Frank Li
2025-11-13 23:44   ` Vladimir Zapolskiy
2025-11-13 23:55 ` [PATCH 1/5] ARM: dts: lpc32xx: add bus surfix for simple-bus Vladimir Zapolskiy
2025-11-14 16:19   ` Frank Li
2025-11-14 16:44     ` Vladimir Zapolskiy
2025-11-14 16:56       ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6f50997d-5a46-4d89-b011-cbc89785e05f@mleia.com \
    --to=vz@mleia.com \
    --cc=Frank.Li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=piotr.wojtaszczyk@timesys.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox