From: Eugeni Dodonov <eugeni.dodonov@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Eugeni Dodonov <eugeni.dodonov@intel.com>
Subject: [PATCH 14/21] drm/i915: Add EDP Registers for Haswell
Date: Thu, 28 Jun 2012 15:55:42 -0300 [thread overview]
Message-ID: <1340909749-15249-15-git-send-email-eugeni.dodonov@intel.com> (raw)
In-Reply-To: <1340909749-15249-1-git-send-email-eugeni.dodonov@intel.com>
From: Shobhit Kumar <shobhit.kumar@intel.com>
PIPE EDP registers and timing registers are different for EDP on HSW
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Sateesh Kavuri <sateesh.kavuri@intel.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0c53e4a..1e70fae 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1528,6 +1528,14 @@
#define _BCLRPAT_B 0x61020
#define _VSYNCSHIFT_B 0x61028
+/* Pipe EDP timing regs */
+#define HTOTAL_EDP 0x6F000
+#define HBLANK_EDP 0x6F004
+#define HSYNC_EDP 0x6F008
+#define VTOTAL_EDP 0x6F00C
+#define VBLANK_EDP 0x6F010
+#define VSYNC_EDP 0x6F014
+#define VSYNCSHIFT_EDP 0x6F028
#define HTOTAL(pipe) _PIPE(pipe, _HTOTAL_A, _HTOTAL_B)
#define HBLANK(pipe) _PIPE(pipe, _HBLANK_A, _HBLANK_B)
@@ -3243,6 +3251,19 @@
#define _PIPEB_LINK_M2 0x61048
#define _PIPEB_LINK_N2 0x6104c
+/* PIPE EDP timing regs */
+#define PIPEEDP_DATA_M1 0x6F030
+#define PIPEEDP_DATA_N1 0x6F034
+
+#define PIPDEDP_DATA_M2 0x6F038
+#define PIPEEDP_DATA_N2 0x6F03C
+
+#define PIPEEDP_LINK_M1 0x6F040
+#define PIPEEDP_LINK_N1 0x6F044
+
+#define PIPEEDP_LINK_M2 0x6F048
+#define PIPEEDP_LINK_N2 0x6F04C
+
#define PIPE_DATA_M1(pipe) _PIPE(pipe, _PIPEA_DATA_M1, _PIPEB_DATA_M1)
#define PIPE_DATA_N1(pipe) _PIPE(pipe, _PIPEA_DATA_N1, _PIPEB_DATA_N1)
#define PIPE_DATA_M2(pipe) _PIPE(pipe, _PIPEA_DATA_M2, _PIPEB_DATA_M2)
@@ -4277,6 +4298,12 @@
#define PIPE_DDI_FUNC_CTL_B 0x61400
#define PIPE_DDI_FUNC_CTL_C 0x62400
#define PIPE_DDI_FUNC_CTL_EDP 0x6F400
+#define PIPE_DDI_EDP_INPUT_SRC_MASK (7<<12)
+#define PIPE_DDI_EDI_INPUT_SRC_A_ON (0<<12)
+#define PIPE_DDI_EDI_INPUT_SRC_A_ON_OFF (4<<12)
+#define PIPE_DDI_EDI_INPUT_SRC_B_ON_OFF (5<<12)
+#define PIPE_DDI_EDI_INPUT_SRC_C_ON_OFF (6<<12)
+
#define DDI_FUNC_CTL(pipe) _PIPE(pipe, \
PIPE_DDI_FUNC_CTL_A, \
PIPE_DDI_FUNC_CTL_B)
@@ -4345,6 +4372,8 @@
#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */
#define DDI_BUF_EMP_MASK (0xf<<24)
#define DDI_BUF_IS_IDLE (1<<7)
+#define DDI_PORT_LANE_CAP_DDIA_4 (1<<4)
+#define DDI_PORT_LANE_CAP_DDIA_2 (0<<4)
#define DDI_PORT_WIDTH_MASK (7<<1)
#define DDI_PORT_WIDTH_X1 (0<<1)
#define DDI_PORT_WIDTH_X2 (1<<1)
@@ -4463,6 +4492,8 @@
#define HSW_MSA_BPC_12_BITS (3<<5)
#define HSW_MSA_BPC_16_BITS (4<<5)
+#define HSW_MSA_EDP_CTL 0x6F410
+
/* Pipe WM_LINETIME - watermark line time */
#define PIPE_WM_LINETIME_A 0x45270
#define PIPE_WM_LINETIME_B 0x45274
--
1.7.11.1
next prev parent reply other threads:[~2012-06-28 18:54 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-28 18:55 [PATCH 00/21] More Haswell patches Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 01/21] drm/i915: Move DP structs to shared location Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 02/21] drm/i915: Add support for DDI control DP outputs Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 03/21] drm/i915: Add DP Helper functions for Haswell Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 04/21] drm/i915: Haswell specific code for the DP Link Training Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 05/21] drm/i915: Disable DDI Pipe Control on HSW while disabling pipe Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 06/21] drm/i915: Hook DP init in ddi module Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 07/21] drm/i915: re-initialize DDI buffer translations after resume Eugeni Dodonov
2012-07-04 20:07 ` Paulo Zanoni
2012-07-04 20:35 ` Daniel Vetter
2012-07-04 23:13 ` Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 08/21] drm/i915: simplify FDI RX check for LPT Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 09/21] drm/i915: account for only one transcoder on LPT Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 10/21] drm/i915: introduce lpt_enable_pch and cpt_enable_pch Eugeni Dodonov
2012-07-04 18:21 ` Paulo Zanoni
2012-07-06 20:47 ` Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 11/21] drm/i915: program FDI_RX TP and FDI delays Eugeni Dodonov
2012-07-04 21:15 ` Paulo Zanoni
2012-07-04 23:15 ` [PATCH 10/31] " Eugeni Dodonov
2012-07-05 12:58 ` Paulo Zanoni
2012-07-05 13:12 ` Daniel Vetter
2012-06-28 18:55 ` [PATCH 12/21] drm/i915: support Haswell-style force waking Eugeni Dodonov
2012-06-28 19:38 ` Daniel Vetter
2012-06-28 20:06 ` Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 13/21] drm/i915: add RPS configuration for Haswell Eugeni Dodonov
2012-06-29 9:56 ` Daniel Vetter
2012-06-29 13:49 ` Eugeni Dodonov
2012-06-28 18:55 ` Eugeni Dodonov [this message]
2012-06-28 18:55 ` [PATCH 15/21] drm/i915: Timing initialization for eDP on HSW Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 16/21] drm/i915: Modesetting for eDP on HSw Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 17/21] drm/i915: Hook eDP initialization on DDI A Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 18/21] drm/i915: introduce haswell_init_clock_gating Eugeni Dodonov
2012-06-28 18:55 ` [PATCH 19/21] drm/i915: prevent bogus intel_update_fbc notifications Eugeni Dodonov
2012-06-28 19:24 ` Daniel Vetter
2012-06-28 20:11 ` Eugeni Dodonov
2012-07-04 17:41 ` Paulo Zanoni
2012-07-04 23:19 ` Eugeni Dodonov
2012-07-05 7:47 ` Daniel Vetter
2012-06-28 18:55 ` [PATCH 20/21] drm/i915: fix PIPE_WM_LINETIME definition Eugeni Dodonov
2012-06-28 19:39 ` Daniel Vetter
2012-06-28 18:55 ` [PATCH 21/21] drm/i915: enable RC6 workaround on Haswell Eugeni Dodonov
2012-06-28 19:23 ` Daniel Vetter
2012-06-28 20:10 ` Eugeni Dodonov
2012-06-28 19:22 ` [PATCH 00/21] More Haswell patches Paulo Zanoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340909749-15249-15-git-send-email-eugeni.dodonov@intel.com \
--to=eugeni.dodonov@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox