From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 5/6] drm/i915: Apply the PPS register unlock workaround more consistently
Date: Tue, 9 Aug 2016 14:34:11 +0300 [thread overview]
Message-ID: <1470742452-5240-6-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1470742452-5240-1-git-send-email-imre.deak@intel.com>
Atm, we apply this workaround somewhat inconsistently at the following
points: driver loading, LVDS init, eDP PPS init, system resume. As this
workaround also affects registers other than PPS (timing, PLL) a more
consistent way is to apply it early after the PPS HW context is known to
be lost: driver loading, system resume and on VLV/CHV/BXT when turning
on power domains.
This is needed by the next patch that removes saving/restoring of the
PP_CONTROL register.
This also removes the incorrect programming of the workaround on HSW+
PCH platforms which don't have the register locking mechanism.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/i915_drv.c | 1 +
drivers/gpu/drm/i915/intel_display.c | 28 ++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_dp.c | 4 +++-
drivers/gpu/drm/i915/intel_drv.h | 1 +
drivers/gpu/drm/i915/intel_lvds.c | 8 --------
drivers/gpu/drm/i915/intel_runtime_pm.c | 4 ++++
6 files changed, 37 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 8cfc264..0fcd1c0 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1560,6 +1560,7 @@ static int i915_drm_resume(struct drm_device *dev)
i915_gem_resume(dev);
i915_restore_state(dev);
+ intel_pps_unlock_regs_wa(dev_priv);
intel_opregion_setup(dev_priv);
intel_init_pch_refclk(dev);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3d5fd06..dc4e600 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14635,6 +14635,32 @@ static bool intel_crt_present(struct drm_device *dev)
return true;
}
+void intel_pps_unlock_regs_wa(struct drm_i915_private *dev_priv)
+{
+ int pps_num;
+ int pps_idx;
+
+ /*
+ * This w/a is needed at least on CPT/PPT, but to be sure apply it
+ * everywhere where registers can be write protected.
+ */
+ if (INTEL_GEN(dev_priv) <= 4 ||
+ HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))
+ pps_num = 1;
+ else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv) ||
+ IS_BROXTON(dev_priv))
+ pps_num = 2;
+ else
+ pps_num = 0;
+
+ for (pps_idx = 0; pps_idx < pps_num; pps_idx++) {
+ u32 val = I915_READ(PP_CONTROL(pps_idx));
+
+ val = (val & ~PANEL_UNLOCK_MASK) | PANEL_UNLOCK_REGS;
+ I915_WRITE(PP_CONTROL(pps_idx), val);
+ }
+}
+
static void intel_pps_init(struct drm_i915_private *dev_priv)
{
if (HAS_PCH_SPLIT(dev_priv) || IS_BROXTON(dev_priv))
@@ -14643,6 +14669,8 @@ static void intel_pps_init(struct drm_i915_private *dev_priv)
dev_priv->pps_mmio_base = VLV_PPS_BASE;
else
dev_priv->pps_mmio_base = PPS_BASE;
+
+ intel_pps_unlock_regs_wa(dev_priv);
}
static void intel_setup_outputs(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 76f5b72..b27f1c5 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1829,7 +1829,9 @@ static u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
lockdep_assert_held(&dev_priv->pps_mutex);
control = I915_READ(_pp_ctrl_reg(intel_dp));
- if (!IS_BROXTON(dev)) {
+ if (WARN_ON((HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv) ||
+ IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
+ (control & PANEL_UNLOCK_MASK) != PANEL_UNLOCK_REGS)) {
control &= ~PANEL_UNLOCK_MASK;
control |= PANEL_UNLOCK_REGS;
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index c29a429..cbce786 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1159,6 +1159,7 @@ void intel_mark_busy(struct drm_i915_private *dev_priv);
void intel_mark_idle(struct drm_i915_private *dev_priv);
void intel_crtc_restore_mode(struct drm_crtc *crtc);
int intel_display_suspend(struct drm_device *dev);
+void intel_pps_unlock_regs_wa(struct drm_i915_private *dev_priv);
void intel_encoder_destroy(struct drm_encoder *encoder);
int intel_connector_init(struct intel_connector *);
struct intel_connector *intel_connector_alloc(void);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index d5158e5..9a6e1ad 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -967,14 +967,6 @@ void intel_lvds_init(struct drm_device *dev)
int pipe;
u8 pin;
- /*
- * Unlock registers and just leave them unlocked. Do this before
- * checking quirk lists to avoid bogus WARNINGs.
- */
- if (HAS_PCH_SPLIT(dev_priv) || INTEL_GEN(dev_priv) <= 4)
- I915_WRITE(PP_CONTROL(0),
- I915_READ(PP_CONTROL(0)) | PANEL_UNLOCK_REGS);
-
if (!intel_lvds_supported(dev))
return;
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 1c603bb..8f51ae3 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -592,6 +592,8 @@ void bxt_disable_dc9(struct drm_i915_private *dev_priv)
DRM_DEBUG_KMS("Disabling DC9\n");
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ intel_pps_unlock_regs_wa(dev_priv);
}
static void assert_csr_loaded(struct drm_i915_private *dev_priv)
@@ -1145,6 +1147,8 @@ static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
vlv_set_power_well(dev_priv, power_well, true);
vlv_display_power_well_init(dev_priv);
+
+ intel_pps_unlock_regs_wa(dev_priv);
}
static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-08-09 11:34 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-09 11:34 [PATCH 0/6] drm/i915: Clean up LVDS/PPS macros, suspend/resume logic Imre Deak
2016-08-09 11:34 ` [PATCH 1/6] drm/i915: Merge the PPS register definitions Imre Deak
2016-08-09 11:53 ` Ville Syrjälä
2016-08-09 13:24 ` Imre Deak
2016-08-09 17:21 ` [PATCH v2 " Imre Deak
2016-08-09 17:50 ` Ville Syrjälä
2016-08-09 11:34 ` [PATCH 2/6] drm/i915: Merge TARGET_POWER_ON and PANEL_POWER_ON flag definitions Imre Deak
2016-08-09 17:51 ` Ville Syrjälä
2016-08-09 11:34 ` [PATCH 3/6] drm/i915/lvds: Restore initial HW state during encoder enabling Imre Deak
2016-08-09 12:48 ` Ville Syrjälä
2016-08-09 14:40 ` Imre Deak
2016-08-09 14:55 ` Ville Syrjälä
2016-08-09 17:21 ` [PATCH v2 " Imre Deak
2016-08-09 17:46 ` Ville Syrjälä
2016-08-09 18:59 ` [PATCH v3 " Imre Deak
2016-08-09 11:34 ` [PATCH 4/6] drm/i915/dp: Restore PPS HW state from the encoder resume hook Imre Deak
2016-08-09 12:52 ` Ville Syrjälä
2016-08-09 15:15 ` Imre Deak
2016-08-09 17:21 ` [PATCH v2 " Imre Deak
2016-08-09 17:49 ` Ville Syrjälä
2016-08-09 11:34 ` Imre Deak [this message]
2016-08-09 13:01 ` [PATCH 5/6] drm/i915: Apply the PPS register unlock workaround more consistently Ville Syrjälä
2016-08-09 15:17 ` Imre Deak
2016-08-09 17:21 ` [PATCH v2 " Imre Deak
2016-08-09 17:46 ` Ville Syrjälä
2016-08-09 18:59 ` [PATCH v3 " Imre Deak
2016-08-09 11:34 ` [PATCH 6/6] drm/i915: Remove LVDS and PPS suspend time save/restore Imre Deak
2016-08-09 18:44 ` Ville Syrjälä
2016-08-09 12:05 ` ✓ Ro.CI.BAT: success for drm/i915: Clean up LVDS/PPS macros, suspend/resume logic Patchwork
2016-08-10 9:35 ` ✗ Ro.CI.BAT: failure for drm/i915: Clean up LVDS/PPS macros, suspend/resume logic (rev7) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470742452-5240-6-git-send-email-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox