From: Ben Widawsky <ben@bwidawsk.net>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 15/26] agp/intel: map more registers for use by the GTT code
Date: Sun, 25 Mar 2012 19:05:40 -0700 [thread overview]
Message-ID: <20120326020540.GB6534@seagal.kumite> (raw)
In-Reply-To: <1332452348-8814-16-git-send-email-jbarnes@virtuousgeek.org>
On Thu, Mar 22, 2012 at 02:38:57PM -0700, Jesse Barnes wrote:
> We need to flush the Gunit TLB when we update GTT PTEs on VLV, but the
> register for doing so is above the range we normally map. Map the whole
> register space to make sure we can get it.
>
> v2: only map the larger space on gen7+ (Daniel)
>
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> ---
> drivers/char/agp/intel-gtt.c | 6 +++++-
> 1 files changed, 5 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
> index 5cf47ac..269cb02 100644
> --- a/drivers/char/agp/intel-gtt.c
> +++ b/drivers/char/agp/intel-gtt.c
> @@ -1206,12 +1206,16 @@ static inline int needs_idle_maps(void)
> static int i9xx_setup(void)
> {
> u32 reg_addr;
> + int size = KB(512);
>
> pci_read_config_dword(intel_private.pcidev, I915_MMADDR, ®_addr);
>
> reg_addr &= 0xfff80000;
>
> - intel_private.registers = ioremap(reg_addr, 128 * 4096);
> + if (INTEL_GTT_GEN >= 7)
> + size = MB(2);
> +
> + intel_private.registers = ioremap(reg_addr, size);
> if (!intel_private.registers)
> return -ENOMEM;
>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Does this need to go in -fixes since it seems like a "fix" for IVB?
Also, just looking at the code, is offset still correct? Gen5, and Gen6
have 2MB, Gen4, and default have 512kb.
next prev parent reply other threads:[~2012-03-26 2:06 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-22 21:38 [RFCv2] ValleyView support Jesse Barnes
2012-03-22 21:38 ` [PATCH 01/26] drm/i915: move NEEDS_FORCE_WAKE to i915_drv.c Jesse Barnes
2012-03-22 22:20 ` Ben Widawsky
2012-03-23 22:46 ` Daniel Vetter
2012-03-22 21:38 ` [PATCH 02/26] drm/i915: re-order GT IIR bit definitions Jesse Barnes
2012-03-22 22:25 ` Ben Widawsky
2012-03-23 22:46 ` Daniel Vetter
2012-03-22 21:38 ` [PATCH 03/26] drm/i915: add ValleyView driver structs and IS_VALLEYVIEW macro Jesse Barnes
2012-03-22 22:31 ` Ben Widawsky
2012-03-22 21:38 ` [PATCH 04/26] drm/i915: ValleyView watermark support Jesse Barnes
2012-03-23 3:29 ` Ben Widawsky
2012-03-23 9:51 ` Daniel Vetter
2012-03-24 2:46 ` Ben Widawsky
2012-03-22 21:38 ` [PATCH 05/26] drm/i915: PLL defines for VLV Jesse Barnes
2012-03-23 3:35 ` Ben Widawsky
2012-03-22 21:38 ` [PATCH 06/26] drm/i915: interrupt bit definitions " Jesse Barnes
2012-03-22 21:38 ` [PATCH 07/26] drm/i915: add ValleyView clock gating init Jesse Barnes
2012-03-22 23:25 ` Ben Widawsky
2012-03-22 21:38 ` [PATCH 08/26] drm/i915: add DPIO read/write functions for ValleyView Jesse Barnes
2012-03-23 4:03 ` Ben Widawsky
2012-03-23 17:29 ` Eugeni Dodonov
2012-03-22 21:38 ` [PATCH 09/26] drm/i915: split PLL update code out of i9xx_crtc_mode_set Jesse Barnes
2012-03-23 4:16 ` Ben Widawsky
2012-03-23 23:00 ` Daniel Vetter
2012-03-22 21:38 ` [PATCH 10/26] drm/i915: split LVDS " Jesse Barnes
2012-03-23 23:04 ` Daniel Vetter
2012-03-22 21:38 ` [PATCH 11/26] drm/i915: ValleyView mode setting limits and PLL functions Jesse Barnes
2012-03-22 21:38 ` [PATCH 12/26] drm/i915: program drain latency regs on ValleyView Jesse Barnes
2012-03-26 1:50 ` Ben Widawsky
2012-03-22 21:38 ` [PATCH 13/26] drm/i915: Enable DP panel power sequencing for ValleyView Jesse Barnes
2012-03-22 21:38 ` [PATCH 14/26] drm/i915: Enable HDMI on ValleyView Jesse Barnes
2012-03-22 21:38 ` [PATCH 15/26] agp/intel: map more registers for use by the GTT code Jesse Barnes
2012-03-26 2:05 ` Ben Widawsky [this message]
2012-03-26 7:06 ` Daniel Vetter
2012-03-22 21:38 ` [PATCH 16/26] agp/intel: add ValleyView AGP driver Jesse Barnes
2012-03-26 2:16 ` Ben Widawsky
2012-03-26 7:08 ` Daniel Vetter
2012-03-26 18:17 ` Ben Widawsky
2012-03-22 21:38 ` [PATCH 17/26] agp/intel: bind " Jesse Barnes
2012-03-22 21:39 ` [PATCH 18/26] drm/i915: add ValleyView specific CRT detect function Jesse Barnes
2012-03-23 17:11 ` Eugeni Dodonov
2012-03-22 21:39 ` [PATCH 19/26] drm/i915: add ValleyView specific force wake get/put functions Jesse Barnes
2012-03-23 17:20 ` Eugeni Dodonov
2012-03-26 18:20 ` Ben Widawsky
2012-03-22 21:39 ` [PATCH 20/26] drm/i915: ValleyView has limited cacheability Jesse Barnes
2012-03-22 23:31 ` Jesse Barnes
2012-03-26 18:34 ` Ben Widawsky
2012-03-26 18:49 ` Daniel Vetter
2012-03-28 17:43 ` Jesse Barnes
2012-03-22 21:39 ` [PATCH 21/26] drm/i915: ValleyView IRQ support Jesse Barnes
2012-03-22 21:39 ` [PATCH 22/26] drm/i915: display regs are at 0x180000 on ValleyView Jesse Barnes
2012-03-22 21:39 ` [PATCH 23/26] drm/i915: check for disabled interrupts " Jesse Barnes
2012-03-22 21:39 ` [PATCH 24/26] drm/i915: add HDMI and DP port enumeration " Jesse Barnes
2012-03-22 21:39 ` [PATCH 25/26] drm/i915: disable turbo on ValleyView for now Jesse Barnes
2012-03-23 17:04 ` Eugeni Dodonov
2012-03-22 21:39 ` [PATCH 26/26] drm/i915: bind driver to ValleyView chipsets Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120326020540.GB6534@seagal.kumite \
--to=ben@bwidawsk.net \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jbarnes@virtuousgeek.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox