public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH 4/6] drm/i915/psr: Do not override PSR2 sink support
Date: Wed, 14 Mar 2018 15:36:15 -0700	[thread overview]
Message-ID: <20180314223617.20122-4-jose.souza@intel.com> (raw)
In-Reply-To: <20180314223617.20122-1-jose.souza@intel.com>

Sink can support our PSR2 requirements but userspace can request
a resolution that PSR2 hardware do not support, in this case it
was overwritten the PSR2 sink support.
Adding another flag here, this way if requested resolution changed
to a value that PSR2 hardware can handle, PSR2 can be enabled.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c |  4 ++--
 drivers/gpu/drm/i915/i915_drv.h     |  3 ++-
 drivers/gpu/drm/i915/intel_psr.c    | 36 ++++++++++++++++++------------------
 3 files changed, 22 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 972014b2497d..aa5918583df8 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2571,7 +2571,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 		   yesno(work_busy(&dev_priv->psr.work.work)));
 
 	if (HAS_DDI(dev_priv)) {
-		if (dev_priv->psr.psr2_support)
+		if (dev_priv->psr.psr2_enabled)
 			enabled = I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE;
 		else
 			enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
@@ -2619,7 +2619,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 
 		seq_printf(m, "Performance_Counter: %u\n", psrperf);
 	}
-	if (dev_priv->psr.psr2_support) {
+	if (dev_priv->psr.psr2_enabled) {
 		u32 psr2 = I915_READ(EDP_PSR2_STATUS);
 
 		seq_printf(m, "EDP_PSR2_STATUS: %x [%s]\n",
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d4bc8d18f56c..d4475196f78a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -601,11 +601,12 @@ struct i915_psr {
 	bool active;
 	struct delayed_work work;
 	unsigned busy_frontbuffer_bits;
-	bool psr2_support;
+	bool sink_psr2_support;
 	bool link_standby;
 	bool colorimetry_support;
 	bool alpm;
 	bool has_hw_tracking;
+	bool psr2_enabled;
 
 	void (*enable_source)(struct intel_dp *,
 			      const struct intel_crtc_state *);
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index c9da1390a727..4cb613855c20 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -160,15 +160,15 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
 		 */
 		y_coord_req = intel_dp_get_y_coord_required(intel_dp);
 
-		dev_priv->psr.psr2_support = frame_sync_cap && y_coord_req;
-		if (dev_priv->psr.psr2_support)
+		dev_priv->psr.sink_psr2_support = frame_sync_cap && y_coord_req;
+		if (dev_priv->psr.sink_psr2_support)
 			DRM_DEBUG_KMS("PSR2 supported on sink\n");
 		else
 			DRM_DEBUG_KMS("PSR2 not supported on sink"
 				      "(frame sync: %d Y-coord required: %d)\n",
 				      frame_sync_cap, y_coord_req);
 
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.sink_psr2_support) {
 			dev_priv->psr.colorimetry_support =
 				intel_dp_get_colorimetry_status(intel_dp);
 			dev_priv->psr.alpm =
@@ -209,7 +209,7 @@ static void hsw_psr_setup_vsc(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
 	struct edp_vsc_psr psr_vsc;
 
-	if (dev_priv->psr.psr2_support) {
+	if (dev_priv->psr.psr2_enabled) {
 		/* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
 		memset(&psr_vsc, 0, sizeof(psr_vsc));
 		psr_vsc.sdp_header.HB0 = 0;
@@ -281,12 +281,12 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
 	aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
 
 	/* Enable AUX frame sync at sink */
-	if (dev_priv->psr.psr2_support)
+	if (dev_priv->psr.psr2_enabled)
 		drm_dp_dpcd_writeb(&intel_dp->aux,
 				DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
 				DP_AUX_FRAME_SYNC_ENABLE);
 	/* Enable ALPM at sink for psr2 */
-	if (dev_priv->psr.psr2_support && dev_priv->psr.alpm)
+	if (dev_priv->psr.psr2_enabled && dev_priv->psr.alpm)
 		drm_dp_dpcd_writeb(&intel_dp->aux,
 				DP_RECEIVER_ALPM_CONFIG,
 				DP_ALPM_ENABLE);
@@ -452,7 +452,7 @@ static void hsw_psr_activate(struct intel_dp *intel_dp)
 	 */
 
 	/* psr1 and psr2 are mutually exclusive.*/
-	if (dev_priv->psr.psr2_support)
+	if (dev_priv->psr.psr2_enabled)
 		hsw_activate_psr2(intel_dp);
 	else
 		hsw_activate_psr1(intel_dp);
@@ -472,7 +472,7 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 	 * dynamically during PSR enable, and extracted from sink
 	 * caps during eDP detection.
 	 */
-	if (!dev_priv->psr.psr2_support)
+	if (!dev_priv->psr.sink_psr2_support)
 		return false;
 
 	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
@@ -571,7 +571,7 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
 
-	if (dev_priv->psr.psr2_support)
+	if (dev_priv->psr.psr2_enabled)
 		WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
 	else
 		WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
@@ -592,7 +592,7 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp,
 
 	psr_aux_io_power_get(intel_dp);
 
-	if (dev_priv->psr.psr2_support) {
+	if (dev_priv->psr.psr2_enabled) {
 		u32 chicken = PSR2_VSC_ENABLE_PROG_HEADER
 			      | PSR2_ADD_VERTICAL_LINE_COUNT;
 		I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
@@ -645,7 +645,7 @@ void intel_psr_enable(struct intel_dp *intel_dp,
 		goto unlock;
 	}
 
-	dev_priv->psr.psr2_support = crtc_state->has_psr2;
+	dev_priv->psr.psr2_enabled = crtc_state->has_psr2;
 	dev_priv->psr.busy_frontbuffer_bits = 0;
 
 	dev_priv->psr.setup_vsc(intel_dp, crtc_state);
@@ -715,12 +715,12 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
 		i915_reg_t psr_status;
 		u32 psr_status_mask;
 
-		if (dev_priv->psr.psr2_support)
+		if (dev_priv->psr.psr2_enabled)
 			drm_dp_dpcd_writeb(&intel_dp->aux,
 					DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
 					0);
 
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.psr2_enabled) {
 			psr_status = EDP_PSR2_STATUS;
 			psr_status_mask = EDP_PSR2_STATUS_STATE_MASK;
 
@@ -744,7 +744,7 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
 
 		dev_priv->psr.active = false;
 	} else {
-		if (dev_priv->psr.psr2_support)
+		if (dev_priv->psr.psr2_enabled)
 			WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
 		else
 			WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
@@ -804,7 +804,7 @@ static void intel_psr_work(struct work_struct *work)
 	 * and be ready for re-enable.
 	 */
 	if (HAS_DDI(dev_priv)) {
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.psr2_enabled) {
 			if (intel_wait_for_register(dev_priv,
 						    EDP_PSR2_STATUS,
 						    EDP_PSR2_STATUS_STATE_MASK,
@@ -863,11 +863,11 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
 		return;
 
 	if (HAS_DDI(dev_priv)) {
-		if (dev_priv->psr.psr2_support)
+		if (dev_priv->psr.psr2_enabled)
 			drm_dp_dpcd_writeb(&intel_dp->aux,
 					DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
 					0);
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.psr2_enabled) {
 			val = I915_READ(EDP_PSR2_CTL);
 			WARN_ON(!(val & EDP_PSR2_ENABLE));
 			I915_WRITE(EDP_PSR2_CTL, val & ~EDP_PSR2_ENABLE);
@@ -1036,7 +1036,7 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
 
 	/* By definition flush = invalidate + flush */
 	if (frontbuffer_bits) {
-		if (dev_priv->psr.psr2_support ||
+		if (dev_priv->psr.psr2_enabled ||
 		    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 			intel_psr_exit(dev_priv);
 		} else {
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-03-14 22:39 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-14 22:36 [PATCH 1/6] drm/i915/psr: Nuke aux_frame_sync José Roberto de Souza
2018-03-14 22:36 ` [PATCH 2/6] drm/i915/psr: Tie PSR2 support to Y coordinate requirement in intel_psr_init_dpcd() José Roberto de Souza
2018-03-16  0:35   ` Rodrigo Vivi
2018-03-16  1:04     ` Souza, Jose
2018-03-16  1:16       ` Rodrigo Vivi
2018-03-14 22:36 ` [PATCH 3/6] drm/i915/psr: Enable Y-coordinate support in source José Roberto de Souza
2018-03-16  0:28   ` Rodrigo Vivi
2018-03-16  1:29     ` Pandiyan, Dhinakaran
2018-03-14 22:36 ` José Roberto de Souza [this message]
2018-03-14 22:36 ` [PATCH 5/6] drm/i915/psr: Rename intel_crtc_state has_psr to can_psr José Roberto de Souza
2018-03-16  2:09   ` Pandiyan, Dhinakaran
2018-03-16 22:22     ` Souza, Jose
2018-03-14 22:36 ` [PATCH 6/6] drm/i915/psr: Enable aux frame sync in source José Roberto de Souza
2018-03-16  0:31   ` Rodrigo Vivi
2018-03-16  1:34   ` Pandiyan, Dhinakaran
2018-03-14 23:10 ` ✗ Fi.CI.BAT: failure for series starting with [1/6] drm/i915/psr: Nuke aux_frame_sync Patchwork
2018-03-16  0:29 ` [PATCH 1/6] " Rodrigo Vivi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180314223617.20122-4-jose.souza@intel.com \
    --to=jose.souza@intel.com \
    --cc=dhinakaran.pandiyan@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox