From: Anusha Srivatsa <anusha.srivatsa@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Subject: [v3 3/7] i915/dp/fec: Check for FEC Support
Date: Thu, 25 Oct 2018 21:49:39 -0700 [thread overview]
Message-ID: <20181026044943.29334-4-anusha.srivatsa@intel.com> (raw)
In-Reply-To: <20181026044943.29334-1-anusha.srivatsa@intel.com>
For DP 1.4 and above, Display Stream compression can be
enabled only if Forward Error Correctin can be performed.
Check if the sink supports FEC using the helper.
v2: Mention External DP where ever FEC is mentioned
in the code.Check return status of dpcd reads. (Gaurav)
- Do regular mode check even if FEC is not supported. (manasi)
v3: Do not perform any dpcd writes in the atomic
check phase. (DK, Manasi)
v4: Use debug level logging for scenario where sink does
not support a feature. (DK)
v5: Correct commit message. rebase.
v6: pass single field instead of an array for helper
function. (manasi)
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 16d1db7c9398..cfcef9e4b5d9 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -680,7 +680,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
dsc_slice_count =
drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
true);
- } else {
+ } else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) {
dsc_max_output_bpp =
intel_dp_dsc_get_output_bpp(max_link_clock,
max_lanes,
@@ -690,7 +690,8 @@ intel_dp_mode_valid(struct drm_connector *connector,
intel_dp_dsc_get_slice_count(intel_dp,
target_clock,
mode->hdisplay);
- }
+ } else
+ DRM_DEBUG_KMS("Sink device does not Support FEC\n");
}
if ((mode_rate > max_rate && !(dsc_max_output_bpp && dsc_slice_count)) ||
@@ -2063,6 +2064,13 @@ static bool intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
if (pipe == PIPE_A && !intel_dp_is_edp(intel_dp))
return false;
+ /* DSC not supported if external DP sink does not support FEC */
+ if (!intel_dp_is_edp(intel_dp) &&
+ !drm_dp_sink_supports_fec(intel_dp->fec_capable)) {
+ DRM_DEBUG_KMS("Sink does not support Forward Error Correction, disabling Display Compression\n");
+ return false;
+ }
+
/* DSC not supported for DSC sink BPC < 8 */
if (limits->max_bpp < 3 * DP_DSC_MIN_SUPPORTED_BPC) {
DRM_DEBUG_KMS("No DSC support for less than 8bpc\n");
--
2.17.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-10-26 4:55 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-26 4:49 [v3 0/7] Forward Error Correction Anusha Srivatsa
2018-10-26 4:49 ` [v3 1/7] i915/dp/fec: Cache the FEC_CAPABLE DPCD register Anusha Srivatsa
2018-10-30 2:29 ` Manasi Navare
2018-10-26 4:49 ` [v3 2/7] drm/dp/fec: DRM helper for Forward Error Correction Anusha Srivatsa
2018-10-30 2:30 ` Manasi Navare
2018-10-26 4:49 ` Anusha Srivatsa [this message]
2018-10-26 4:49 ` [v3 4/7] i915/dp/fec: Add can_fec to the crtc state Anusha Srivatsa
2018-10-30 2:44 ` Manasi Navare
2018-10-30 18:57 ` Ville Syrjälä
2018-10-30 19:38 ` Ville Syrjälä
2018-10-26 4:49 ` [v3 5/7] drm/i915/fec: Set FEC_READY in FEC_CONFIGURATION Anusha Srivatsa
2018-10-26 4:49 ` [v3 6/7] i915/dp/fec: Configure the Forward Error Correction bits Anusha Srivatsa
2018-10-26 4:49 ` [v3 7/7] drm/i915/fec: Disable FEC state Anusha Srivatsa
2018-10-26 5:07 ` ✗ Fi.CI.BAT: failure for Forward Error Correction (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181026044943.29334-4-anusha.srivatsa@intel.com \
--to=anusha.srivatsa@intel.com \
--cc=dhinakaran.pandiyan@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox