From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 13/23] drm/i915: Fix the TypeC port mode sanitization during loading/resume
Date: Tue, 4 Jun 2019 17:58:16 +0300 [thread overview]
Message-ID: <20190604145826.16424-14-imre.deak@intel.com> (raw)
In-Reply-To: <20190604145826.16424-1-imre.deak@intel.com>
For using the correct AUX power domains we have to sanitize the TypeC
port mode early, so move that before encoder sanitization. To do this
properly read out the actual port mode instead of just relying on the
VBT legacy port flag (which can be incorrect).
We also verify that the PHY is connected as expected if the port is
active. In case the port is inactive we connect the PHY in case of a
legacy port - as we did so far. The PHY will be connected during
detection for DP-alt mode - as it was done so far. For TBT-alt mode
nothing needs to be done to connect the PHY.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 16 +-----
drivers/gpu/drm/i915/intel_display.c | 10 ++++
drivers/gpu/drm/i915/intel_dp_mst.h | 8 ++-
drivers/gpu/drm/i915/intel_tc.c | 83 ++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_tc.h | 2 +
5 files changed, 103 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index d236839bee19..2bc3b4f2c9a5 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -3918,17 +3918,6 @@ static void intel_ddi_encoder_suspend(struct intel_encoder *encoder)
icl_tc_phy_disconnect(dig_port);
}
-static void intel_ddi_encoder_reset(struct drm_encoder *drm_encoder)
-{
- struct intel_digital_port *dig_port = enc_to_dig_port(drm_encoder);
- struct drm_i915_private *i915 = to_i915(drm_encoder->dev);
-
- if (intel_port_is_tc(i915, dig_port->base.port))
- intel_digital_port_connected(&dig_port->base);
-
- intel_dp_encoder_reset(drm_encoder);
-}
-
static void intel_ddi_encoder_destroy(struct drm_encoder *encoder)
{
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
@@ -3944,7 +3933,7 @@ static void intel_ddi_encoder_destroy(struct drm_encoder *encoder)
}
static const struct drm_encoder_funcs intel_ddi_funcs = {
- .reset = intel_ddi_encoder_reset,
+ .reset = intel_dp_encoder_reset,
.destroy = intel_ddi_encoder_destroy,
};
@@ -4309,9 +4298,6 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
intel_infoframe_init(intel_dig_port);
- if (intel_port_is_tc(dev_priv, port))
- intel_digital_port_connected(intel_encoder);
-
return;
err:
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0e425a6eebf3..91d18cd0371c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -75,6 +75,7 @@
#include "intel_sdvo.h"
#include "intel_sideband.h"
#include "intel_sprite.h"
+#include "intel_tc.h"
#include "intel_tv.h"
#include "intel_vdsc.h"
@@ -16683,6 +16684,15 @@ intel_modeset_setup_hw_state(struct drm_device *dev,
intel_modeset_readout_hw_state(dev);
/* HW state is read out, now we need to sanitize this mess. */
+
+ /* Sanitize the TypeC port mode upfront, encoders depend on this */
+ for_each_intel_encoder(dev, encoder) {
+ /* We need to sanitize only the MST primary port. */
+ if (encoder->type != INTEL_OUTPUT_DP_MST &&
+ intel_port_is_tc(dev_priv, encoder->port))
+ intel_tc_port_sanitize(enc_to_dig_port(&encoder->base));
+ }
+
get_encoder_power_domains(dev_priv);
if (HAS_PCH_IBX(dev_priv))
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.h b/drivers/gpu/drm/i915/intel_dp_mst.h
index 1470c6e0514b..6754c211205a 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.h
+++ b/drivers/gpu/drm/i915/intel_dp_mst.h
@@ -6,9 +6,15 @@
#ifndef __INTEL_DP_MST_H__
#define __INTEL_DP_MST_H__
-struct intel_digital_port;
+#include "intel_drv.h"
int intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int conn_id);
void intel_dp_mst_encoder_cleanup(struct intel_digital_port *intel_dig_port);
+static inline int
+intel_dp_mst_encoder_active_links(struct intel_digital_port *intel_dig_port)
+{
+ return intel_dig_port->dp.active_mst_links;
+}
+
#endif /* __INTEL_DP_MST_H__ */
diff --git a/drivers/gpu/drm/i915/intel_tc.c b/drivers/gpu/drm/i915/intel_tc.c
index 9832e2ddb92e..9ebf25d7931c 100644
--- a/drivers/gpu/drm/i915/intel_tc.c
+++ b/drivers/gpu/drm/i915/intel_tc.c
@@ -3,6 +3,7 @@
* Copyright © 2019 Intel Corporation
*/
#include "intel_display.h"
+#include "intel_dp_mst.h"
#include "i915_drv.h"
#include "intel_tc.h"
@@ -167,6 +168,15 @@ static bool icl_tc_phy_set_safe_mode(struct intel_digital_port *dig_port,
return true;
}
+static bool icl_tc_phy_is_in_safe_mode(struct intel_digital_port *dig_port)
+{
+ struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
+ enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port->base.port);
+
+ return !(I915_READ(PORT_TX_DFLEXDPCSSS) &
+ DP_PHY_MODE_STATUS_NOT_SAFE(tc_port));
+}
+
/*
* This function implements the first part of the Connect Flow described by our
* specification, Gen11 TypeC Programming chapter. The rest of the flow (reading
@@ -250,6 +260,49 @@ void icl_tc_phy_disconnect(struct intel_digital_port *dig_port)
}
}
+static bool icl_tc_phy_is_connected(struct intel_digital_port *dig_port)
+{
+ struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
+ enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port->base.port);
+
+ if (!icl_tc_phy_status_complete(dig_port)) {
+ DRM_DEBUG_KMS("Port %s: PHY status not complete\n",
+ tc_port_name(dev_priv, tc_port));
+ return dig_port->tc_mode == TC_PORT_TBT_ALT;
+ }
+
+ if (icl_tc_phy_is_in_safe_mode(dig_port)) {
+ DRM_DEBUG_KMS("Port %s: PHY still in safe mode\n",
+ tc_port_name(dev_priv, tc_port));
+
+ return false;
+ }
+
+ return dig_port->tc_mode == TC_PORT_DP_ALT ||
+ dig_port->tc_mode == TC_PORT_LEGACY;
+}
+
+static enum tc_port_mode
+intel_tc_port_get_current_mode(struct intel_digital_port *dig_port)
+{
+ u32 live_status_mask = tc_port_live_status_mask(dig_port);
+ bool in_safe_mode = icl_tc_phy_is_in_safe_mode(dig_port);
+ enum tc_port_mode mode;
+
+ if (in_safe_mode || WARN_ON(!icl_tc_phy_status_complete(dig_port)))
+ return TC_PORT_TBT_ALT;
+
+ mode = dig_port->tc_legacy_port ? TC_PORT_LEGACY : TC_PORT_DP_ALT;
+ if (live_status_mask) {
+ enum tc_port_mode live_mode = fls(live_status_mask) - 1;
+
+ if (!WARN_ON(live_mode == TC_PORT_TBT_ALT))
+ mode = live_mode;
+ }
+
+ return mode;
+}
+
static enum tc_port_mode
intel_tc_port_get_target_mode(struct intel_digital_port *dig_port)
{
@@ -278,6 +331,36 @@ static void intel_tc_port_reset_mode(struct intel_digital_port *dig_port)
tc_port_mode_name(dig_port->tc_mode));
}
+void intel_tc_port_sanitize(struct intel_digital_port *dig_port)
+{
+ struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
+ struct intel_encoder *encoder = &dig_port->base;
+ enum tc_port tc_port = intel_port_to_tc(dev_priv, encoder->port);
+ int active_links = 0;
+
+ dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port);
+ if (dig_port->dp.is_mst)
+ active_links = intel_dp_mst_encoder_active_links(dig_port);
+ else if (encoder->base.crtc)
+ active_links = to_intel_crtc(encoder->base.crtc)->active;
+
+ if (active_links) {
+ if (!icl_tc_phy_is_connected(dig_port))
+ DRM_DEBUG_DRIVER("Port %s: PHY disconnected with %d active link(s)\n",
+ tc_port_name(dev_priv, tc_port),
+ active_links);
+ goto out;
+ }
+
+ if (dig_port->tc_legacy_port)
+ icl_tc_phy_connect(dig_port);
+
+out:
+ DRM_DEBUG_DRIVER("Port %s: sanitize mode (%s)\n",
+ tc_port_name(dev_priv, tc_port),
+ tc_port_mode_name(dig_port->tc_mode));
+}
+
static bool
intel_tc_port_needs_reset(struct intel_digital_port *dig_port)
{
diff --git a/drivers/gpu/drm/i915/intel_tc.h b/drivers/gpu/drm/i915/intel_tc.h
index e937f5326959..10f0f0d81ee4 100644
--- a/drivers/gpu/drm/i915/intel_tc.h
+++ b/drivers/gpu/drm/i915/intel_tc.h
@@ -11,4 +11,6 @@ bool intel_tc_port_connected(struct intel_digital_port *dig_port);
u32 intel_tc_port_get_lane_info(struct intel_digital_port *dig_port);
int intel_tc_port_fia_max_lane_count(struct intel_digital_port *dig_port);
+void intel_tc_port_sanitize(struct intel_digital_port *dig_port);
+
#endif /* __INTEL_TC_H__ */
--
2.17.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-06-04 14:59 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-04 14:58 [PATCH 00/23] drm/i915: Fix TypeC port mode switching Imre Deak
2019-06-04 14:58 ` [PATCH 01/23] drm/i915/icl: Add support to read out the TBT PLL HW state Imre Deak
2019-06-07 17:36 ` Souza, Jose
2019-06-04 14:58 ` [PATCH 02/23] drm/i915: Tune down WARNs about TBT AUX power well enabling Imre Deak
2019-06-07 17:50 ` Souza, Jose
2019-06-08 13:33 ` Imre Deak
2019-06-04 14:58 ` [PATCH 03/23] drm/i915: Move the TypeC port handling code to a separate file Imre Deak
2019-06-06 8:42 ` Jani Nikula
2019-06-06 8:43 ` Jani Nikula
2019-06-06 9:09 ` Imre Deak
2019-06-10 22:57 ` Lucas De Marchi
2019-06-11 10:01 ` Jani Nikula
2019-06-07 17:56 ` Souza, Jose
2019-06-04 14:58 ` [PATCH 04/23] drm/i915: Sanitize the terminology used for TypeC port modes Imre Deak
2019-06-07 19:15 ` Souza, Jose
2019-06-08 13:43 ` Imre Deak
2019-06-10 23:21 ` Lucas De Marchi
2019-06-11 11:19 ` Imre Deak
2019-06-04 14:58 ` [PATCH 05/23] drm/i915: Don't enable the DDI-IO power in the TypeC TBT-alt mode Imre Deak
2019-06-07 19:23 ` Souza, Jose
2019-06-04 14:58 ` [PATCH 06/23] drm/i915: Fix the TBT AUX power well enabling Imre Deak
2019-06-07 19:58 ` Souza, Jose
2019-06-08 13:55 ` Imre Deak
2019-06-04 14:58 ` [PATCH 07/23] drm/i915: Use the correct AUX power domain in TypeC TBT-alt mode Imre Deak
2019-06-07 20:02 ` Souza, Jose
2019-06-04 14:58 ` [PATCH 08/23] drm/i915: Unify the TypeC port notation in debug/error messages Imre Deak
2019-06-07 20:21 ` Souza, Jose
2019-06-07 20:42 ` Imre Deak
2019-06-07 20:45 ` Souza, Jose
2019-06-07 20:46 ` Imre Deak
2019-06-04 14:58 ` [PATCH 09/23] drm/i915: Factor out common parts from TypeC port handling functions Imre Deak
2019-06-06 8:47 ` Jani Nikula
2019-06-06 9:19 ` Imre Deak
2019-06-07 21:22 ` Souza, Jose
2019-06-08 17:23 ` Imre Deak
2019-06-18 16:33 ` Ville Syrjälä
2019-06-18 16:44 ` Imre Deak
2019-06-04 14:58 ` [PATCH 10/23] drm/i915: Wait for TypeC PHY complete flag to clear in safe mode Imre Deak
2019-06-07 21:32 ` Souza, Jose
2019-06-04 14:58 ` [PATCH 11/23] drm/i915: Handle the TCCOLD power-down event Imre Deak
2019-06-07 21:41 ` Souza, Jose
2019-06-08 17:31 ` Imre Deak
2019-06-04 14:58 ` [PATCH 12/23] drm/i915: Sanitize the TypeC connect/detect sequences Imre Deak
2019-06-07 22:15 ` Souza, Jose
2019-06-08 17:40 ` Imre Deak
2019-06-04 14:58 ` Imre Deak [this message]
2019-06-07 22:39 ` [PATCH 13/23] drm/i915: Fix the TypeC port mode sanitization during loading/resume Souza, Jose
2019-06-08 17:50 ` Imre Deak
2019-06-04 14:58 ` [PATCH 14/23] drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers Imre Deak
2019-06-04 14:58 ` [PATCH 15/23] drm/i915: Sanitize the TypeC FIA lane configuration decoding Imre Deak
2019-06-07 22:49 ` Souza, Jose
2019-06-18 16:39 ` Ville Syrjälä
2019-06-18 16:46 ` Imre Deak
2019-06-04 14:58 ` [PATCH 16/23] drm/i915: Sanitize the shared DPLL reserve/release interface Imre Deak
2019-06-04 14:58 ` [PATCH 17/23] drm/i915: Sanitize the shared DPLL find/reference interface Imre Deak
2019-06-04 14:58 ` [PATCH 18/23] drm/i915/icl: Split getting the DPLLs to port type specific functions Imre Deak
2019-06-04 14:58 ` [PATCH 19/23] drm/i915/icl: Reserve all required PLLs for TypeC ports Imre Deak
2019-06-07 17:41 ` [PATCH v2 " Imre Deak
2019-06-18 17:25 ` Ville Syrjälä
2019-06-18 18:02 ` Imre Deak
2019-06-04 14:58 ` [PATCH 20/23] drm/i915: Keep the TypeC port mode fixed when the port is active Imre Deak
2019-06-19 12:58 ` Ville Syrjälä
2019-06-19 16:08 ` Imre Deak
2019-06-04 14:58 ` [PATCH 21/23] drm/i915: Add state verification for the TypeC port mode Imre Deak
2019-06-04 14:58 ` [PATCH 22/23] drm/i915: Remove unneeded disconnect in TypeC legacy " Imre Deak
2019-06-08 0:18 ` Souza, Jose
2019-06-04 14:58 ` [PATCH 23/23] drm/i915: WARN about invalid lane reversal in TBT-alt/DP-alt modes Imre Deak
2019-06-08 0:13 ` Souza, Jose
2019-06-08 0:25 ` Souza, Jose
2019-06-04 17:30 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Fix TypeC port mode switching Patchwork
2019-06-04 17:39 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-06-05 5:24 ` ✓ Fi.CI.BAT: success " Patchwork
2019-06-05 16:36 ` ✓ Fi.CI.IGT: " Patchwork
2019-06-07 17:59 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Fix TypeC port mode switching (rev2) Patchwork
2019-06-07 18:07 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-06-07 18:34 ` ✓ Fi.CI.BAT: success " Patchwork
2019-06-10 12:34 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190604145826.16424-14-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox