public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Souza, Jose" <jose.souza@intel.com>
To: "intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>,
	"Deak, Imre" <imre.deak@intel.com>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Subject: Re: [PATCH 04/23] drm/i915: Sanitize the terminology used for TypeC port modes
Date: Fri, 7 Jun 2019 19:15:12 +0000	[thread overview]
Message-ID: <4942db726877b35a0a751e9dab968781a102482b.camel@intel.com> (raw)
In-Reply-To: <20190604145826.16424-5-imre.deak@intel.com>

On Tue, 2019-06-04 at 17:58 +0300, Imre Deak wrote:
> The TypeC port mode can switch dynamically, to reflect that better
> call
> the port's mode as 'mode' rather than 'type'.
> 
> While at it:
> - s/TC_PORT_TBT/TC_PORT_TBT_ALT/ and s/TC_PORT_TYPEC/TC_PORT_DP_ALT/.
>   'TYPEC' is ambiguous, TBT_ALT and DP_ALT better match the reality.
> 
> - Remove the 'unknown' TypeC port mode. The mode is always known,
> it's
>   the TBT-alt/safe mode after HW reset and after disconnecting the
> PHY.
>   Simplify the tc_port/tc_type checks accordingly.
> 
> - Don't WARN if the port mode changes, that can happen normally.
> 
> No functional changes.

There is, the default tc_mode value now is TC_PORT_TBT_ALT instead of
TC_PORT_UNKNOWN.

With the change above:
Reviewed-by: José Roberto de Souza <
jose.souza@intel.com>

Also consider split this patch in two.


> 
> Cc: Animesh Manna <animesh.manna@intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> Cc: José Roberto de Souza <jose.souza@intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Signed-off-by: Imre Deak <imre.deak@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c      | 11 +++---
>  drivers/gpu/drm/i915/intel_display.h  |  7 ++--
>  drivers/gpu/drm/i915/intel_dp.c       |  2 +-
>  drivers/gpu/drm/i915/intel_dpll_mgr.c |  2 +-
>  drivers/gpu/drm/i915/intel_drv.h      |  2 +-
>  drivers/gpu/drm/i915/intel_tc.c       | 48 +++++++++++------------
> ----
>  6 files changed, 31 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index 5a1c98438375..a3574f14a3d0 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -2986,14 +2986,14 @@ static void icl_program_mg_dp_mode(struct
> intel_digital_port *intel_dig_port)
>  	enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
>  	u32 ln0, ln1, lane_info;
>  
> -	if (tc_port == PORT_TC_NONE || intel_dig_port->tc_type ==
> TC_PORT_TBT)
> +	if (intel_dig_port->tc_mode == TC_PORT_TBT_ALT)
>  		return;
>  
>  	ln0 = I915_READ(MG_DP_MODE(0, port));
>  	ln1 = I915_READ(MG_DP_MODE(1, port));
>  
> -	switch (intel_dig_port->tc_type) {
> -	case TC_PORT_TYPEC:
> +	switch (intel_dig_port->tc_mode) {
> +	case TC_PORT_DP_ALT:
>  		ln0 &= ~(MG_DP_MODE_CFG_DP_X1_MODE |
> MG_DP_MODE_CFG_DP_X2_MODE);
>  		ln1 &= ~(MG_DP_MODE_CFG_DP_X1_MODE |
> MG_DP_MODE_CFG_DP_X2_MODE);
>  
> @@ -3036,7 +3036,7 @@ static void icl_program_mg_dp_mode(struct
> intel_digital_port *intel_dig_port)
>  		break;
>  
>  	default:
> -		MISSING_CASE(intel_dig_port->tc_type);
> +		MISSING_CASE(intel_dig_port->tc_mode);
>  		return;
>  	}
>  
> @@ -3630,8 +3630,7 @@ intel_ddi_pre_pll_enable(struct intel_encoder
> *encoder,
>  	 * Program the lane count for static/dynamic connections on
> Type-C ports.
>  	 * Skip this step for TBT.
>  	 */
> -	if (dig_port->tc_type == TC_PORT_UNKNOWN ||
> -	    dig_port->tc_type == TC_PORT_TBT)
> +	if (dig_port->tc_mode == TC_PORT_TBT_ALT)
>  		return;
>  
>  	intel_ddi_set_fia_lane_count(encoder, crtc_state, port);
> diff --git a/drivers/gpu/drm/i915/intel_display.h
> b/drivers/gpu/drm/i915/intel_display.h
> index ee6b8194a459..d296556ed82e 100644
> --- a/drivers/gpu/drm/i915/intel_display.h
> +++ b/drivers/gpu/drm/i915/intel_display.h
> @@ -189,10 +189,9 @@ enum tc_port {
>  	I915_MAX_TC_PORTS
>  };
>  
> -enum tc_port_type {
> -	TC_PORT_UNKNOWN = 0,
> -	TC_PORT_TYPEC,
> -	TC_PORT_TBT,
> +enum tc_port_mode {
> +	TC_PORT_TBT_ALT,
> +	TC_PORT_DP_ALT,
>  	TC_PORT_LEGACY,
>  };
>  
> diff --git a/drivers/gpu/drm/i915/intel_dp.c
> b/drivers/gpu/drm/i915/intel_dp.c
> index b69310bd9914..e1e27662aa6d 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1175,7 +1175,7 @@ static u32 skl_get_aux_send_ctl(struct intel_dp
> *intel_dp,
>  	      DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(32) |
>  	      DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
>  
> -	if (intel_dig_port->tc_type == TC_PORT_TBT)
> +	if (intel_dig_port->tc_mode == TC_PORT_TBT_ALT)
>  		ret |= DP_AUX_CH_CTL_TBT_IO;
>  
>  	return ret;
> diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> index 69787f259677..f4787650a0d3 100644
> --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> @@ -2817,7 +2817,7 @@ icl_get_dpll(struct intel_crtc_state
> *crtc_state,
>  			intel_dig_port = enc_to_dig_port(&encoder-
> >base);
>  		}
>  
> -		if (intel_dig_port->tc_type == TC_PORT_TBT) {
> +		if (intel_dig_port->tc_mode == TC_PORT_TBT_ALT) {
>  			min = DPLL_ID_ICL_TBTPLL;
>  			max = min;
>  			ret = icl_calc_dpll_state(crtc_state, encoder);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 0dcc03592d6e..30cd49dbd0d8 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1225,7 +1225,7 @@ struct intel_digital_port {
>  	enum aux_ch aux_ch;
>  	enum intel_display_power_domain ddi_io_power_domain;
>  	bool tc_legacy_port:1;
> -	enum tc_port_type tc_type;
> +	enum tc_port_mode tc_mode;
>  
>  	void (*write_infoframe)(struct intel_encoder *encoder,
>  				const struct intel_crtc_state
> *crtc_state,
> diff --git a/drivers/gpu/drm/i915/intel_tc.c
> b/drivers/gpu/drm/i915/intel_tc.c
> index 7a1b5870945f..a3057c44bec6 100644
> --- a/drivers/gpu/drm/i915/intel_tc.c
> +++ b/drivers/gpu/drm/i915/intel_tc.c
> @@ -6,19 +6,18 @@
>  #include "i915_drv.h"
>  #include "intel_tc.h"
>  
> -static const char *tc_type_name(enum tc_port_type type)
> +static const char *tc_port_mode_name(enum tc_port_mode mode)
>  {
>  	static const char * const names[] = {
> -		[TC_PORT_UNKNOWN] = "unknown",
> +		[TC_PORT_TBT_ALT] = "tbt-alt",
> +		[TC_PORT_DP_ALT] = "dp-alt",
>  		[TC_PORT_LEGACY] = "legacy",
> -		[TC_PORT_TYPEC] = "typec",
> -		[TC_PORT_TBT] = "tbt",
>  	};
>  
> -	if (WARN_ON(type >= ARRAY_SIZE(names)))
> -		type = TC_PORT_UNKNOWN;
> +	if (WARN_ON(mode >= ARRAY_SIZE(names)))
> +		mode = TC_PORT_TBT_ALT;
>  
> -	return names[type];
> +	return names[mode];
>  }
>  
>  int intel_tc_port_fia_max_lane_count(struct intel_digital_port
> *dig_port)
> @@ -28,7 +27,7 @@ int intel_tc_port_fia_max_lane_count(struct
> intel_digital_port *dig_port)
>  	intel_wakeref_t wakeref;
>  	u32 lane_info;
>  
> -	if (tc_port == PORT_TC_NONE || dig_port->tc_type !=
> TC_PORT_TYPEC)
> +	if (dig_port->tc_mode != TC_PORT_DP_ALT)
>  		return 4;
>  
>  	lane_info = 0;
> @@ -80,8 +79,8 @@ static bool icl_tc_phy_connect(struct
> intel_digital_port *dig_port)
>  	enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port-
> >base.port);
>  	u32 val;
>  
> -	if (dig_port->tc_type != TC_PORT_LEGACY &&
> -	    dig_port->tc_type != TC_PORT_TYPEC)
> +	if (dig_port->tc_mode != TC_PORT_LEGACY &&
> +	    dig_port->tc_mode != TC_PORT_DP_ALT)
>  		return true;
>  
>  	val = I915_READ(PORT_TX_DFLEXDPPMS);
> @@ -105,7 +104,7 @@ static bool icl_tc_phy_connect(struct
> intel_digital_port *dig_port)
>  	 * Now we have to re-check the live state, in case the port
> recently
>  	 * became disconnected. Not necessary for legacy mode.
>  	 */
> -	if (dig_port->tc_type == TC_PORT_TYPEC &&
> +	if (dig_port->tc_mode == TC_PORT_DP_ALT &&
>  	    !(I915_READ(PORT_TX_DFLEXDPSP) &
> TC_LIVE_STATE_TC(tc_port))) {
>  		DRM_DEBUG_KMS("TC PHY %d sudden disconnect.\n",
> tc_port);
>  		icl_tc_phy_disconnect(dig_port);
> @@ -124,15 +123,12 @@ void icl_tc_phy_disconnect(struct
> intel_digital_port *dig_port)
>  	struct drm_i915_private *dev_priv = to_i915(dig_port-
> >base.base.dev);
>  	enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port-
> >base.port);
>  
> -	if (dig_port->tc_type == TC_PORT_UNKNOWN)
> -		return;
> -
>  	/*
>  	 * TBT disconnection flow is read the live status, what was
> done in
>  	 * caller.
>  	 */
> -	if (dig_port->tc_type == TC_PORT_TYPEC ||
> -	    dig_port->tc_type == TC_PORT_LEGACY) {
> +	if (dig_port->tc_mode == TC_PORT_DP_ALT ||
> +	    dig_port->tc_mode == TC_PORT_LEGACY) {
>  		u32 val;
>  
>  		val = I915_READ(PORT_TX_DFLEXDPCSSS);
> @@ -142,9 +138,9 @@ void icl_tc_phy_disconnect(struct
> intel_digital_port *dig_port)
>  
>  	DRM_DEBUG_KMS("Port %c TC type %s disconnected\n",
>  		      port_name(dig_port->base.port),
> -		      tc_type_name(dig_port->tc_type));
> +		      tc_port_mode_name(dig_port->tc_mode));
>  
> -	dig_port->tc_type = TC_PORT_UNKNOWN;
> +	dig_port->tc_mode = TC_PORT_TBT_ALT;
>  }
>  
>  static void icl_update_tc_port_type(struct drm_i915_private
> *dev_priv,
> @@ -152,26 +148,22 @@ static void icl_update_tc_port_type(struct
> drm_i915_private *dev_priv,
>  				    bool is_legacy, bool is_typec, bool
> is_tbt)
>  {
>  	enum port port = intel_dig_port->base.port;
> -	enum tc_port_type old_type = intel_dig_port->tc_type;
> +	enum tc_port_mode old_mode = intel_dig_port->tc_mode;
>  
>  	WARN_ON(is_legacy + is_typec + is_tbt != 1);
>  
>  	if (is_legacy)
> -		intel_dig_port->tc_type = TC_PORT_LEGACY;
> +		intel_dig_port->tc_mode = TC_PORT_LEGACY;
>  	else if (is_typec)
> -		intel_dig_port->tc_type = TC_PORT_TYPEC;
> +		intel_dig_port->tc_mode = TC_PORT_DP_ALT;
>  	else if (is_tbt)
> -		intel_dig_port->tc_type = TC_PORT_TBT;
> +		intel_dig_port->tc_mode = TC_PORT_TBT_ALT;
>  	else
>  		return;
>  
> -	/* Types are not supposed to be changed at runtime. */
> -	WARN_ON(old_type != TC_PORT_UNKNOWN &&
> -		old_type != intel_dig_port->tc_type);
> -
> -	if (old_type != intel_dig_port->tc_type)
> +	if (old_mode != intel_dig_port->tc_mode)
>  		DRM_DEBUG_KMS("Port %c has TC type %s\n",
> port_name(port),
> -			      tc_type_name(intel_dig_port->tc_type));
> +			      tc_port_mode_name(intel_dig_port-
> >tc_mode));
>  }
>  
>  
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-06-07 19:15 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-04 14:58 [PATCH 00/23] drm/i915: Fix TypeC port mode switching Imre Deak
2019-06-04 14:58 ` [PATCH 01/23] drm/i915/icl: Add support to read out the TBT PLL HW state Imre Deak
2019-06-07 17:36   ` Souza, Jose
2019-06-04 14:58 ` [PATCH 02/23] drm/i915: Tune down WARNs about TBT AUX power well enabling Imre Deak
2019-06-07 17:50   ` Souza, Jose
2019-06-08 13:33     ` Imre Deak
2019-06-04 14:58 ` [PATCH 03/23] drm/i915: Move the TypeC port handling code to a separate file Imre Deak
2019-06-06  8:42   ` Jani Nikula
2019-06-06  8:43     ` Jani Nikula
2019-06-06  9:09     ` Imre Deak
2019-06-10 22:57     ` Lucas De Marchi
2019-06-11 10:01       ` Jani Nikula
2019-06-07 17:56   ` Souza, Jose
2019-06-04 14:58 ` [PATCH 04/23] drm/i915: Sanitize the terminology used for TypeC port modes Imre Deak
2019-06-07 19:15   ` Souza, Jose [this message]
2019-06-08 13:43     ` Imre Deak
2019-06-10 23:21   ` Lucas De Marchi
2019-06-11 11:19     ` Imre Deak
2019-06-04 14:58 ` [PATCH 05/23] drm/i915: Don't enable the DDI-IO power in the TypeC TBT-alt mode Imre Deak
2019-06-07 19:23   ` Souza, Jose
2019-06-04 14:58 ` [PATCH 06/23] drm/i915: Fix the TBT AUX power well enabling Imre Deak
2019-06-07 19:58   ` Souza, Jose
2019-06-08 13:55     ` Imre Deak
2019-06-04 14:58 ` [PATCH 07/23] drm/i915: Use the correct AUX power domain in TypeC TBT-alt mode Imre Deak
2019-06-07 20:02   ` Souza, Jose
2019-06-04 14:58 ` [PATCH 08/23] drm/i915: Unify the TypeC port notation in debug/error messages Imre Deak
2019-06-07 20:21   ` Souza, Jose
2019-06-07 20:42     ` Imre Deak
2019-06-07 20:45       ` Souza, Jose
2019-06-07 20:46       ` Imre Deak
2019-06-04 14:58 ` [PATCH 09/23] drm/i915: Factor out common parts from TypeC port handling functions Imre Deak
2019-06-06  8:47   ` Jani Nikula
2019-06-06  9:19     ` Imre Deak
2019-06-07 21:22   ` Souza, Jose
2019-06-08 17:23     ` Imre Deak
2019-06-18 16:33   ` Ville Syrjälä
2019-06-18 16:44     ` Imre Deak
2019-06-04 14:58 ` [PATCH 10/23] drm/i915: Wait for TypeC PHY complete flag to clear in safe mode Imre Deak
2019-06-07 21:32   ` Souza, Jose
2019-06-04 14:58 ` [PATCH 11/23] drm/i915: Handle the TCCOLD power-down event Imre Deak
2019-06-07 21:41   ` Souza, Jose
2019-06-08 17:31     ` Imre Deak
2019-06-04 14:58 ` [PATCH 12/23] drm/i915: Sanitize the TypeC connect/detect sequences Imre Deak
2019-06-07 22:15   ` Souza, Jose
2019-06-08 17:40     ` Imre Deak
2019-06-04 14:58 ` [PATCH 13/23] drm/i915: Fix the TypeC port mode sanitization during loading/resume Imre Deak
2019-06-07 22:39   ` Souza, Jose
2019-06-08 17:50     ` Imre Deak
2019-06-04 14:58 ` [PATCH 14/23] drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers Imre Deak
2019-06-04 14:58 ` [PATCH 15/23] drm/i915: Sanitize the TypeC FIA lane configuration decoding Imre Deak
2019-06-07 22:49   ` Souza, Jose
2019-06-18 16:39   ` Ville Syrjälä
2019-06-18 16:46     ` Imre Deak
2019-06-04 14:58 ` [PATCH 16/23] drm/i915: Sanitize the shared DPLL reserve/release interface Imre Deak
2019-06-04 14:58 ` [PATCH 17/23] drm/i915: Sanitize the shared DPLL find/reference interface Imre Deak
2019-06-04 14:58 ` [PATCH 18/23] drm/i915/icl: Split getting the DPLLs to port type specific functions Imre Deak
2019-06-04 14:58 ` [PATCH 19/23] drm/i915/icl: Reserve all required PLLs for TypeC ports Imre Deak
2019-06-07 17:41   ` [PATCH v2 " Imre Deak
2019-06-18 17:25     ` Ville Syrjälä
2019-06-18 18:02       ` Imre Deak
2019-06-04 14:58 ` [PATCH 20/23] drm/i915: Keep the TypeC port mode fixed when the port is active Imre Deak
2019-06-19 12:58   ` Ville Syrjälä
2019-06-19 16:08     ` Imre Deak
2019-06-04 14:58 ` [PATCH 21/23] drm/i915: Add state verification for the TypeC port mode Imre Deak
2019-06-04 14:58 ` [PATCH 22/23] drm/i915: Remove unneeded disconnect in TypeC legacy " Imre Deak
2019-06-08  0:18   ` Souza, Jose
2019-06-04 14:58 ` [PATCH 23/23] drm/i915: WARN about invalid lane reversal in TBT-alt/DP-alt modes Imre Deak
2019-06-08  0:13   ` Souza, Jose
2019-06-08  0:25     ` Souza, Jose
2019-06-04 17:30 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Fix TypeC port mode switching Patchwork
2019-06-04 17:39 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-06-05  5:24 ` ✓ Fi.CI.BAT: success " Patchwork
2019-06-05 16:36 ` ✓ Fi.CI.IGT: " Patchwork
2019-06-07 17:59 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Fix TypeC port mode switching (rev2) Patchwork
2019-06-07 18:07 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-06-07 18:34 ` ✓ Fi.CI.BAT: success " Patchwork
2019-06-10 12:34 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4942db726877b35a0a751e9dab968781a102482b.camel@intel.com \
    --to=jose.souza@intel.com \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox