From: Lucas De Marchi <lucas.demarchi@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 25/40] drm/i915/tgl: Implement TGL DisplayPort training sequence
Date: Sat, 17 Aug 2019 02:38:47 -0700 [thread overview]
Message-ID: <20190817093902.2171-26-lucas.demarchi@intel.com> (raw)
In-Reply-To: <20190817093902.2171-1-lucas.demarchi@intel.com>
From: José Roberto de Souza <jose.souza@intel.com>
On TGL some registers moved from DDI to transcoder and the
DisplayPort training sequence has a separate BSpec page.
I started adding 'ifs' to the original intel_ddi_pre_enable_dp() but
it was becoming really hard to follow, so a new and cleaner function
for TGL was added with comments of all steps. It's similar to ICL, but
different enough to deserve a new function
The rest of DisplayPort enable and the whole disable sequences
remained the same.
BSpec: 49190
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 134 ++++++++++++++++++++++-
drivers/gpu/drm/i915/display/intel_dp.c | 8 +-
2 files changed, 134 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 385f9fcbdbed..1ba5e524a101 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -1761,7 +1761,14 @@ void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state,
I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
}
-void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
+/*
+ * Returns the TRANS_DDI_FUNC_CTL value based on CRTC state.
+ *
+ * Only intended to be used by intel_ddi_enable_transcoder_func() and
+ * intel_ddi_config_transcoder_func().
+ */
+static u32
+intel_ddi_transcoder_func_reg_val_get(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc);
@@ -1851,6 +1858,33 @@ void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
}
+ return temp;
+}
+
+void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+ u32 temp;
+
+ temp = intel_ddi_transcoder_func_reg_val_get(crtc_state);
+ I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
+}
+
+/*
+ * Same as intel_ddi_enable_transcoder_func() but it do not set the enable bit
+ */
+static void
+intel_ddi_config_transcoder_func(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+ u32 temp;
+
+ temp = intel_ddi_transcoder_func_reg_val_get(crtc_state);
+ temp &= ~TRANS_DDI_FUNC_ENABLE;
I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
}
@@ -3174,9 +3208,89 @@ static void intel_ddi_disable_fec_state(struct intel_encoder *encoder,
POSTING_READ(ctl);
}
-static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
- const struct intel_crtc_state *crtc_state,
- const struct drm_connector_state *conn_state)
+static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state,
+ const struct drm_connector_state *conn_state)
+{
+ struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+ struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
+ bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
+ int level = intel_ddi_dp_level(intel_dp);
+
+ intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
+ crtc_state->lane_count, is_mst);
+
+ /* 1.a got on intel_atomic_commit_tail() */
+
+ /* 2. */
+ intel_edp_panel_on(intel_dp);
+
+ /*
+ * 1.b, 3. and 4. is done by before this functions by
+ * haswell_crtc_enable()->intel_encoders_pre_pll_enable() and
+ * haswell_crtc_enable()->intel_enable_shared_dpll()
+ */
+
+ /* 5. */
+ if (!intel_phy_is_tc(dev_priv, phy) ||
+ dig_port->tc_mode != TC_PORT_TBT_ALT)
+ intel_display_power_get(dev_priv,
+ dig_port->ddi_io_power_domain);
+
+ /* 6. */
+ icl_program_mg_dp_mode(dig_port);
+
+ /*
+ * 7.a - Steps in this function that should only be executed over MST
+ * master as MST encoders will only be executed on MST master as MST
+ * encoder have have it's own pre_enable() hook
+ */
+ intel_ddi_enable_pipe_clock(crtc_state);
+
+ /* 7.b */
+ intel_ddi_config_transcoder_func(crtc_state);
+
+ /* 7.d */
+ icl_disable_phy_clock_gating(dig_port);
+
+ /* 7.e */
+ icl_ddi_vswing_sequence(encoder, crtc_state->port_clock, level,
+ encoder->type);
+
+ /* 7.f */
+ if (intel_phy_is_combo(dev_priv, phy)) {
+ bool lane_reversal =
+ dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+
+ intel_combo_phy_power_up_lanes(dev_priv, phy, false,
+ crtc_state->lane_count,
+ lane_reversal);
+ }
+
+ /* 7.g */
+ intel_ddi_init_dp_buf_reg(encoder);
+
+ if (!is_mst)
+ intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+
+ /* 7.c, 7.h, 7.i, 7.j */
+ intel_dp_start_link_train(intel_dp);
+
+ /* 7.k */
+ intel_dp_stop_link_train(intel_dp);
+
+ /* 7.l */
+ intel_dp_sink_set_decompression_state(intel_dp, crtc_state,
+ true);
+ intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
+ intel_dsc_enable(encoder, crtc_state);
+}
+
+static void hsw_ddi_pre_enable_dp(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state,
+ const struct drm_connector_state *conn_state)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
@@ -3242,6 +3356,18 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
intel_dsc_enable(encoder, crtc_state);
}
+static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state,
+ const struct drm_connector_state *conn_state)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+
+ if (INTEL_GEN(dev_priv) >= 12)
+ tgl_ddi_pre_enable_dp(encoder, crtc_state, conn_state);
+ else
+ hsw_ddi_pre_enable_dp(encoder, crtc_state, conn_state);
+}
+
static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 372719c90c14..9c2f8f6ff918 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -4006,13 +4006,13 @@ void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
I915_WRITE(ctl, val);
/*
- * On PORT_A we can have only eDP in SST mode. There the only reason
- * we need to set idle transmission mode is to work around a HW issue
- * where we enable the pipe while not in idle link-training mode.
+ * Until TGL on PORT_A we can have only eDP in SST mode. There the only
+ * reason we need to set idle transmission mode is to work around a HW
+ * issue where we enable the pipe while not in idle link-training mode.
* In this case there is requirement to wait for a minimum number of
* idle patterns to be sent.
*/
- if (port == PORT_A)
+ if (port == PORT_A && INTEL_GEN(dev_priv) < 12)
return;
if (intel_de_wait_for_set(dev_priv, status,
--
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-08-17 9:39 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-17 9:38 [PATCH v2 00/40] Tiger Lake batch 3 Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 01/40] drm/i915/tgl: disable DDIC Lucas De Marchi
2019-08-19 17:16 ` Matt Roper
2019-08-17 9:38 ` [PATCH v2 02/40] drm/i915/tgl: add support for reading the timestamp frequency Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 03/40] drm/i915/tgl: Move transcoders to pipes' powerwells Lucas De Marchi
2019-08-19 11:59 ` Imre Deak
2019-08-17 9:38 ` [PATCH v2 04/40] drm/i915/tgl: update DMC firmware to 2.04 Lucas De Marchi
2019-08-19 17:55 ` Srivatsa, Anusha
2019-08-19 18:03 ` Lucas De Marchi
2019-08-19 18:07 ` Srivatsa, Anusha
2019-08-17 9:38 ` [PATCH v2 05/40] drm/i915/psr: Make PSR registers relative to transcoders Lucas De Marchi
2019-08-20 20:16 ` Lucas De Marchi
2019-08-20 21:15 ` Souza, Jose
2019-08-17 9:38 ` [PATCH v2 06/40] drm/i915: Add transcoder restriction to PSR2 Lucas De Marchi
2019-08-20 20:19 ` Lucas De Marchi
2019-08-21 14:50 ` Ville Syrjälä
2019-08-17 9:38 ` [PATCH v2 07/40] drm/i915: Do not unmask PSR interruption in IRQ postinstall Lucas De Marchi
2019-08-20 20:29 ` Lucas De Marchi
2019-08-20 22:20 ` Souza, Jose
2019-08-17 9:38 ` [PATCH v2 08/40] drm/i915/psr: Only handle interruptions of the transcoder in use Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 09/40] drm/i915/bdw+: Enable PSR in any eDP port Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 10/40] drm/i915: Guard and warn if more than one eDP panel is present Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 11/40] drm/i915: Do not read PSR2 register in transcoders without PSR2 Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 12/40] drm/i915/tgl: PSR link standby is not supported anymore Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 13/40] drm/i915/tgl: Access the right register when handling PSR interruptions Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 14/40] drm/i915/tgl: Add maximum resolution supported by PSR2 HW Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 15/40] drm/i915: Fix DP-MST crtc_mask Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 16/40] drm/i915: Add for_each_new_intel_connector_in_state() Lucas De Marchi
2019-08-21 13:13 ` Kahola, Mika
2019-08-17 9:38 ` [PATCH v2 17/40] drm: Add for_each_oldnew_intel_crtc_in_state_reverse() Lucas De Marchi
2019-08-21 11:22 ` Kahola, Mika
2019-08-21 13:32 ` Kahola, Mika
2019-08-17 9:38 ` [PATCH v2 18/40] drm/i915: Disable pipes in reverse order Lucas De Marchi
2019-08-21 11:29 ` Kahola, Mika
2019-08-17 9:38 ` [PATCH v2 19/40] drm/i915/tgl: Select master transcoder in DP MST Lucas De Marchi
2019-08-22 12:43 ` Jani Nikula
2019-08-22 16:44 ` Maarten Lankhorst
2019-08-17 9:38 ` [PATCH v2 20/40] drm/i915/tgl: Introduce initial Tiger Lake workarounds Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 21/40] drm/i915/tgl: Enable VD HCP/MFX sub-pipe power gating Lucas De Marchi
2019-08-20 20:54 ` Lucas De Marchi
2019-08-21 9:16 ` Ye, Tony
2019-08-17 9:38 ` [PATCH v2 22/40] drm/i915/tgl: Do not apply WaIncreaseDefaultTLBEntries from GEN12 onwards Lucas De Marchi
2019-08-20 23:29 ` Summers, Stuart
2019-08-22 0:25 ` Summers, Stuart
2019-08-17 9:38 ` [PATCH v2 23/40] drm/i915/tgl: Register state context definition for Gen12 Lucas De Marchi
2019-08-21 21:12 ` Daniele Ceraolo Spurio
2019-08-22 13:31 ` Mika Kuoppala
2019-08-22 14:51 ` Chris Wilson
2019-08-17 9:38 ` [PATCH v2 24/40] drm/i915/tgl: move DP_TP_* to transcoder Lucas De Marchi
2019-08-17 9:38 ` Lucas De Marchi [this message]
2019-08-20 22:01 ` [PATCH v2] drm/i915/tgl: Implement TGL DisplayPort training sequence José Roberto de Souza
2019-08-20 23:07 ` Manasi Navare
2019-08-21 20:22 ` Souza, Jose
[not found] ` <20190821213233.1067-1-jose.souza@intel.com>
2019-08-22 11:00 ` [PATCH v3] " Maarten Lankhorst
2019-08-17 9:38 ` [PATCH v2 26/40] HACK: drm/i915/tgl: Gen12 render context size Lucas De Marchi
2019-08-20 10:36 ` Chris Wilson
2019-08-22 13:42 ` Mika Kuoppala
2019-08-22 13:48 ` Chris Wilson
2019-08-17 9:38 ` [PATCH v2 27/40] drm/i915/tgl: add Gen12 default indirect ctx offset Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 28/40] drm/i915/tgl: add GEN12_MAX_CONTEXT_HW_ID Lucas De Marchi
2019-08-21 14:43 ` Lisovskiy, Stanislav
2019-08-17 9:38 ` [PATCH v2 29/40] drm/i915/tgl: Gen12 csb support Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 30/40] drm/i915/tgl: Report valid VDBoxes with SFC capability Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 31/40] rm/i915/tgl: Move GTCR register to cope with GAM MMIO address remap Lucas De Marchi
2019-08-20 20:43 ` Lucas De Marchi
2019-08-22 13:28 ` Mika Kuoppala
2019-08-23 0:44 ` Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 32/40] drm/i915/tgl: Updated Private PAT programming Lucas De Marchi
2019-08-20 10:33 ` Chris Wilson
2019-08-17 9:38 ` [PATCH v2 33/40] drm/i915/tgl/perf: use the same oa ctx_id format as icl Lucas De Marchi
2019-08-21 12:36 ` Lionel Landwerlin
2019-08-17 9:38 ` [PATCH v2 34/40] drm/i915/perf: add a parameter to control the size of OA buffer Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 35/40] drm/i915/tgl: Add perf support on TGL Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 36/40] drm/i915/tgl: Gen-12 display loses Yf tiling and legacy CCS support Lucas De Marchi
2019-08-17 9:38 ` [PATCH v2 37/40] drm/framebuffer/tgl: Format modifier for Intel Gen-12 render compression Lucas De Marchi
2019-08-21 14:34 ` Lisovskiy, Stanislav
2019-08-17 9:39 ` [PATCH v2 38/40] drm/i915/tgl: Gen-12 render decompression Lucas De Marchi
2019-08-17 9:39 ` [PATCH v2 39/40] drm/framebuffer/tgl: Format modifier for Intel Gen-12 media compression Lucas De Marchi
2019-08-21 14:40 ` Lisovskiy, Stanislav
2019-08-17 9:39 ` [PATCH v2 40/40] drm/i915/tgl: " Lucas De Marchi
2019-08-21 14:36 ` Lisovskiy, Stanislav
2019-08-17 9:49 ` ✗ Fi.CI.CHECKPATCH: warning for Tiger Lake batch 3 (rev2) Patchwork
2019-08-17 10:03 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-08-17 10:12 ` ✗ Fi.CI.BAT: failure " Patchwork
2019-08-20 10:28 ` ✗ Fi.CI.CHECKPATCH: warning for Tiger Lake batch 3 (rev3) Patchwork
2019-08-20 10:42 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-08-20 12:15 ` ✗ Fi.CI.BAT: failure " Patchwork
2019-08-20 12:36 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-20 17:59 ` ✓ Fi.CI.IGT: " Patchwork
2019-08-20 22:30 ` ✗ Fi.CI.BAT: failure for Tiger Lake batch 3 (rev4) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190817093902.2171-26-lucas.demarchi@intel.com \
--to=lucas.demarchi@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox