public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Matt Roper <matthew.d.roper@intel.com>
To: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 01/40] drm/i915/tgl: disable DDIC
Date: Mon, 19 Aug 2019 10:16:59 -0700	[thread overview]
Message-ID: <20190819171659.GG27240@mdroper-desk.amr.corp.intel.com> (raw)
In-Reply-To: <20190817093902.2171-2-lucas.demarchi@intel.com>

On Sat, Aug 17, 2019 at 02:38:23AM -0700, Lucas De Marchi wrote:
> The current SKUs added for Tiger Lake don't have DDIC hooked up, even
> though it is supported by the SoC. The current state for these SKUs is
> problematic since while enabling the combo phy, PORT_COMP_DW* return
> 0xFFFFFFFF, which is invalid per register definition.

If this is always the case on these platforms, can we test for this
specific invalid value at the beginning of icl_combo_phys_init() and set
a quirk flag that can be used later to decide whether to disable DDI-C?


Matt

> 
> During initialization we check what phys are not yet enabled by reading
> PHY_MISC_C and try to enable it by toggling the "DE to IO Comp Pwr Down"
> bit.  But after that any read to the PORT_COMP_DW* returns invalid
> results. This removes the following warning
> 
> [56997.634353] Missing case (val == 4294967295)
> [56997.639241] WARNING: CPU: 5 PID: 768 at drivers/gpu/drm/i915/display/intel_combo_phy.c:54 cnl_get_procmon_ref_values+0xc9/0xf0 [i915]
> [56997.639808] Modules linked in: i915(+) prime_numbers x86_pkg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e [last unloaded: prime_numbers]
> [56997.639808] CPU: 5 PID: 768 Comm: insmod Tainted: G     U  W         5.2.0-demarchi+ #65
> [56997.639808] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2252.A03.1906270154 06/27/2019
> [56997.639808] RIP: 0010:cnl_get_procmon_ref_values+0xc9/0xf0 [i915]
> [56997.639808] Code: 2c a0 85 c9 74 e0 81 f9 00 00 00 01 75 09 48 c7 c0 0c a4 2c a0 eb cf 48 c7 c6 3c 3a 31 a0 48 c7 c7 40 3a 31 a0 e8 6b 4d ea e0 <0f> 0b 48 c7 c0 00 a4 2c a0 eb b1 48 c7 c0 24 a4 2
> c a0 eb a8 e8 be
> [56997.639808] RSP: 0018:ffffc9000068f8a8 EFLAGS: 00010286
> [56997.639808] RAX: 0000000000000000 RBX: ffff88848fa90000 RCX: 0000000000000000
> [56997.639808] RDX: ffff8884a08b5ef8 RSI: ffff8884a08a6658 RDI: 00000000ffffffff
> [56997.639808] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
> [56997.639808] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848fa90000
> [56997.639808] R13: 0000000000000000 R14: 0000000000000002 R15: 0006c00000162000
> [56997.639808] FS:  00007f61ca3d12c0(0000) GS:ffff8884a0880000(0000) knlGS:0000000000000000
> [56997.639808] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [56997.639808] CR2: 00007f71be6a92c0 CR3: 0000000494750006 CR4: 0000000000760ee0
> [56997.639808] PKRU: 55555554
> [56997.639808] Call Trace:
> [56997.639808]  cnl_verify_procmon_ref_values+0x36/0xf0 [i915]
> [56997.639808]  ? rcu_read_lock_sched_held+0x6f/0x80
> [56997.639808]  ? gen11_fwtable_read32+0x257/0x290 [i915]
> [56997.639808]  icl_combo_phy_verify_state.part.0+0x22/0xa0 [i915]
> [56997.639808]  intel_combo_phy_init+0x17e/0x3e0 [i915]
> [56997.639808]  ? icl_display_core_init+0x2c/0x1a0 [i915]
> [56997.639808]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
> [56997.639808]  icl_display_core_init+0x34/0x1a0 [i915]
> [56997.639808]  intel_power_domains_init_hw+0x200/0x570 [i915]
> [56997.639808]  i915_driver_probe+0x103b/0x17e0 [i915]
> [56997.639808]  ? printk+0x53/0x6a
> [56997.639808]  i915_pci_probe+0x3b/0x190 [i915]
> 
> We may or may not need to change the implementation to account for DDIC
> being available on other SKUs. For now I think the best thing to do is
> to just disable the port.
> 
> v2: Fix checkpatch warning on commit message
> 
> Cc: José Roberto de Souza <jose.souza@intel.com>
> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index ee54d9659c99..b51d1ceb8739 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -6667,7 +6667,7 @@ bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy)
>  	if (phy == PHY_NONE)
>  		return false;
>  
> -	if (IS_ELKHARTLAKE(dev_priv) || INTEL_GEN(dev_priv) >= 12)
> +	if (IS_ELKHARTLAKE(dev_priv))
>  		return phy <= PHY_C;
>  
>  	if (INTEL_GEN(dev_priv) >= 11)
> @@ -15299,7 +15299,6 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
>  		/* TODO: initialize TC ports as well */
>  		intel_ddi_init(dev_priv, PORT_A);
>  		intel_ddi_init(dev_priv, PORT_B);
> -		intel_ddi_init(dev_priv, PORT_C);
>  		icl_dsi_init(dev_priv);
>  	} else if (IS_ELKHARTLAKE(dev_priv)) {
>  		intel_ddi_init(dev_priv, PORT_A);
> -- 
> 2.21.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-08-19 17:17 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-17  9:38 [PATCH v2 00/40] Tiger Lake batch 3 Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 01/40] drm/i915/tgl: disable DDIC Lucas De Marchi
2019-08-19 17:16   ` Matt Roper [this message]
2019-08-17  9:38 ` [PATCH v2 02/40] drm/i915/tgl: add support for reading the timestamp frequency Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 03/40] drm/i915/tgl: Move transcoders to pipes' powerwells Lucas De Marchi
2019-08-19 11:59   ` Imre Deak
2019-08-17  9:38 ` [PATCH v2 04/40] drm/i915/tgl: update DMC firmware to 2.04 Lucas De Marchi
2019-08-19 17:55   ` Srivatsa, Anusha
2019-08-19 18:03     ` Lucas De Marchi
2019-08-19 18:07       ` Srivatsa, Anusha
2019-08-17  9:38 ` [PATCH v2 05/40] drm/i915/psr: Make PSR registers relative to transcoders Lucas De Marchi
2019-08-20 20:16   ` Lucas De Marchi
2019-08-20 21:15     ` Souza, Jose
2019-08-17  9:38 ` [PATCH v2 06/40] drm/i915: Add transcoder restriction to PSR2 Lucas De Marchi
2019-08-20 20:19   ` Lucas De Marchi
2019-08-21 14:50   ` Ville Syrjälä
2019-08-17  9:38 ` [PATCH v2 07/40] drm/i915: Do not unmask PSR interruption in IRQ postinstall Lucas De Marchi
2019-08-20 20:29   ` Lucas De Marchi
2019-08-20 22:20     ` Souza, Jose
2019-08-17  9:38 ` [PATCH v2 08/40] drm/i915/psr: Only handle interruptions of the transcoder in use Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 09/40] drm/i915/bdw+: Enable PSR in any eDP port Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 10/40] drm/i915: Guard and warn if more than one eDP panel is present Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 11/40] drm/i915: Do not read PSR2 register in transcoders without PSR2 Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 12/40] drm/i915/tgl: PSR link standby is not supported anymore Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 13/40] drm/i915/tgl: Access the right register when handling PSR interruptions Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 14/40] drm/i915/tgl: Add maximum resolution supported by PSR2 HW Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 15/40] drm/i915: Fix DP-MST crtc_mask Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 16/40] drm/i915: Add for_each_new_intel_connector_in_state() Lucas De Marchi
2019-08-21 13:13   ` Kahola, Mika
2019-08-17  9:38 ` [PATCH v2 17/40] drm: Add for_each_oldnew_intel_crtc_in_state_reverse() Lucas De Marchi
2019-08-21 11:22   ` Kahola, Mika
2019-08-21 13:32     ` Kahola, Mika
2019-08-17  9:38 ` [PATCH v2 18/40] drm/i915: Disable pipes in reverse order Lucas De Marchi
2019-08-21 11:29   ` Kahola, Mika
2019-08-17  9:38 ` [PATCH v2 19/40] drm/i915/tgl: Select master transcoder in DP MST Lucas De Marchi
2019-08-22 12:43   ` Jani Nikula
2019-08-22 16:44   ` Maarten Lankhorst
2019-08-17  9:38 ` [PATCH v2 20/40] drm/i915/tgl: Introduce initial Tiger Lake workarounds Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 21/40] drm/i915/tgl: Enable VD HCP/MFX sub-pipe power gating Lucas De Marchi
2019-08-20 20:54   ` Lucas De Marchi
2019-08-21  9:16     ` Ye, Tony
2019-08-17  9:38 ` [PATCH v2 22/40] drm/i915/tgl: Do not apply WaIncreaseDefaultTLBEntries from GEN12 onwards Lucas De Marchi
2019-08-20 23:29   ` Summers, Stuart
2019-08-22  0:25     ` Summers, Stuart
2019-08-17  9:38 ` [PATCH v2 23/40] drm/i915/tgl: Register state context definition for Gen12 Lucas De Marchi
2019-08-21 21:12   ` Daniele Ceraolo Spurio
2019-08-22 13:31   ` Mika Kuoppala
2019-08-22 14:51     ` Chris Wilson
2019-08-17  9:38 ` [PATCH v2 24/40] drm/i915/tgl: move DP_TP_* to transcoder Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 25/40] drm/i915/tgl: Implement TGL DisplayPort training sequence Lucas De Marchi
2019-08-20 22:01   ` [PATCH v2] " José Roberto de Souza
2019-08-20 23:07     ` Manasi Navare
2019-08-21 20:22       ` Souza, Jose
     [not found]   ` <20190821213233.1067-1-jose.souza@intel.com>
2019-08-22 11:00     ` [PATCH v3] " Maarten Lankhorst
2019-08-17  9:38 ` [PATCH v2 26/40] HACK: drm/i915/tgl: Gen12 render context size Lucas De Marchi
2019-08-20 10:36   ` Chris Wilson
2019-08-22 13:42     ` Mika Kuoppala
2019-08-22 13:48       ` Chris Wilson
2019-08-17  9:38 ` [PATCH v2 27/40] drm/i915/tgl: add Gen12 default indirect ctx offset Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 28/40] drm/i915/tgl: add GEN12_MAX_CONTEXT_HW_ID Lucas De Marchi
2019-08-21 14:43   ` Lisovskiy, Stanislav
2019-08-17  9:38 ` [PATCH v2 29/40] drm/i915/tgl: Gen12 csb support Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 30/40] drm/i915/tgl: Report valid VDBoxes with SFC capability Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 31/40] rm/i915/tgl: Move GTCR register to cope with GAM MMIO address remap Lucas De Marchi
2019-08-20 20:43   ` Lucas De Marchi
2019-08-22 13:28   ` Mika Kuoppala
2019-08-23  0:44     ` Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 32/40] drm/i915/tgl: Updated Private PAT programming Lucas De Marchi
2019-08-20 10:33   ` Chris Wilson
2019-08-17  9:38 ` [PATCH v2 33/40] drm/i915/tgl/perf: use the same oa ctx_id format as icl Lucas De Marchi
2019-08-21 12:36   ` Lionel Landwerlin
2019-08-17  9:38 ` [PATCH v2 34/40] drm/i915/perf: add a parameter to control the size of OA buffer Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 35/40] drm/i915/tgl: Add perf support on TGL Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 36/40] drm/i915/tgl: Gen-12 display loses Yf tiling and legacy CCS support Lucas De Marchi
2019-08-17  9:38 ` [PATCH v2 37/40] drm/framebuffer/tgl: Format modifier for Intel Gen-12 render compression Lucas De Marchi
2019-08-21 14:34   ` Lisovskiy, Stanislav
2019-08-17  9:39 ` [PATCH v2 38/40] drm/i915/tgl: Gen-12 render decompression Lucas De Marchi
2019-08-17  9:39 ` [PATCH v2 39/40] drm/framebuffer/tgl: Format modifier for Intel Gen-12 media compression Lucas De Marchi
2019-08-21 14:40   ` Lisovskiy, Stanislav
2019-08-17  9:39 ` [PATCH v2 40/40] drm/i915/tgl: " Lucas De Marchi
2019-08-21 14:36   ` Lisovskiy, Stanislav
2019-08-17  9:49 ` ✗ Fi.CI.CHECKPATCH: warning for Tiger Lake batch 3 (rev2) Patchwork
2019-08-17 10:03 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-08-17 10:12 ` ✗ Fi.CI.BAT: failure " Patchwork
2019-08-20 10:28 ` ✗ Fi.CI.CHECKPATCH: warning for Tiger Lake batch 3 (rev3) Patchwork
2019-08-20 10:42 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-08-20 12:15 ` ✗ Fi.CI.BAT: failure " Patchwork
2019-08-20 12:36 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-20 17:59 ` ✓ Fi.CI.IGT: " Patchwork
2019-08-20 22:30 ` ✗ Fi.CI.BAT: failure for Tiger Lake batch 3 (rev4) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190819171659.GG27240@mdroper-desk.amr.corp.intel.com \
    --to=matthew.d.roper@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lucas.demarchi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox