Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 1/6] drm/i915/tgl+: Use the correct DP_TP_* register instances in MST encoders
Date: Tue, 16 Jun 2020 18:46:22 +0300	[thread overview]
Message-ID: <20200616154622.GZ6112@intel.com> (raw)
In-Reply-To: <20200616141855.746-1-imre.deak@intel.com>

On Tue, Jun 16, 2020 at 05:18:50PM +0300, Imre Deak wrote:
> MST encoders must use the master MST transcoder's DP_TP_STATUS and
> DP_TP_CONTROL registers. Atm, during the HW readout of a slave
> transcoder's CRTC state we reset these register addresses in
> intel_dp::regs.dp_tp_* to the slave transcoder's DP_TP_* register
> addresses incorrectly; fix this.
> 
> This issue led at least to
> 'Timed out waiting for ACT sent when disabling'
> errors during output disabling in a multiple MST stream config.
> 
> This change replaces
> https://patchwork.freedesktop.org/patch/369577/?series=78193&rev=1
> which just papered over the problem.
> 
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: José Roberto de Souza <jose.souza@intel.com>
> Signed-off-by: Imre Deak <imre.deak@intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index ca7bb2294d2b..73d6cc29291a 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -4193,11 +4193,6 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
>  	if (drm_WARN_ON(&dev_priv->drm, transcoder_is_dsi(cpu_transcoder)))
>  		return;
>  
> -	if (INTEL_GEN(dev_priv) >= 12) {
> -		intel_dp->regs.dp_tp_ctl = TGL_DP_TP_CTL(cpu_transcoder);
> -		intel_dp->regs.dp_tp_status = TGL_DP_TP_STATUS(cpu_transcoder);
> -	}
> -
>  	intel_dsc_get_config(encoder, pipe_config);
>  
>  	temp = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder));
> @@ -4299,6 +4294,16 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
>  		break;
>  	}
>  
> +	if (INTEL_GEN(dev_priv) >= 12) {
> +		enum transcoder transcoder =
> +			intel_dp_mst_is_slave_trans(pipe_config) ?
> +			pipe_config->mst_master_transcoder :
> +			pipe_config->cpu_transcoder;
> +
> +		intel_dp->regs.dp_tp_ctl = TGL_DP_TP_CTL(transcoder);
> +		intel_dp->regs.dp_tp_status = TGL_DP_TP_STATUS(transcoder);
> +	}
> +
>  	pipe_config->has_audio =
>  		intel_ddi_is_audio_enabled(dev_priv, cpu_transcoder);
>  
> -- 
> 2.23.1

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-06-16 15:46 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-16 14:18 [Intel-gfx] [PATCH 1/6] drm/i915/tgl+: Use the correct DP_TP_* register instances in MST encoders Imre Deak
2020-06-16 14:18 ` [Intel-gfx] [PATCH 2/6] drm/i915/dp_mst: Disable link training fallback on MST links Imre Deak
2020-06-16 15:22   ` Ville Syrjälä
2020-06-16 15:30     ` Imre Deak
2020-06-16 15:39       ` Ville Syrjälä
2020-06-16 15:49         ` Imre Deak
2020-06-16 16:20           ` Ville Syrjälä
2020-06-16 21:11   ` [Intel-gfx] [PATCH v2 " Imre Deak
2020-06-16 14:18 ` [Intel-gfx] [PATCH 3/6] drm/i915/dp_mst: Move clearing the ACT sent flag closer to its polling Imre Deak
2020-06-16 15:47   ` Ville Syrjälä
2020-06-16 14:18 ` [Intel-gfx] [PATCH 4/6] drm/i915/dp_mst: Clear only the ACT sent flag from DP_TP_STATUS Imre Deak
2020-06-16 15:47   ` Ville Syrjälä
2020-06-16 14:18 ` [Intel-gfx] [PATCH 5/6] drm/i915/dp_mst: Clear the ACT sent flag during encoder disabling too Imre Deak
2020-06-16 15:47   ` Ville Syrjälä
2020-06-16 14:18 ` [Intel-gfx] [PATCH 6/6] drm/i915/dp_mst: Ensure the DPCD ACT sent flag is cleared before waiting for it Imre Deak
2020-06-16 15:45   ` Ville Syrjälä
2020-06-16 15:54     ` Imre Deak
2020-06-16 16:23       ` Ville Syrjälä
2020-06-16 16:40         ` Ville Syrjälä
2020-06-16 16:47           ` Imre Deak
2020-06-16 21:11   ` [Intel-gfx] [PATCH v2 " Imre Deak
2020-06-17 15:27     ` Lyude Paul
2020-06-23  7:30     ` Imre Deak
2020-06-16 15:46 ` Ville Syrjälä [this message]
2020-06-16 16:32 ` [Intel-gfx] [PATCH 1/6] drm/i915/tgl+: Use the correct DP_TP_* register instances in MST encoders Souza, Jose
2020-06-16 16:42   ` Imre Deak
2020-06-16 17:02     ` Souza, Jose
2020-06-16 17:32       ` Imre Deak
2020-06-16 19:50 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/6] " Patchwork
2020-06-16 21:11 ` [Intel-gfx] [PATCH v2 1/6] " Imre Deak
2020-06-16 22:38   ` Souza, Jose
2020-06-16 22:16 ` [Intel-gfx] ✓ Fi.CI.IGT: success for series starting with [1/6] " Patchwork
2020-06-23  7:21   ` Imre Deak
2020-06-16 23:36 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [v2,1/6] drm/i915/tgl+: Use the correct DP_TP_* register instances in MST encoders (rev4) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200616154622.GZ6112@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox