From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 02/10] drm/i915: Shrink ilk-bdw wm storage by using u16
Date: Fri, 30 Oct 2020 18:50:37 +0200 [thread overview]
Message-ID: <20201030165045.5000-3-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20201030165045.5000-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
The maximum watermark value we can ever have on ilk-bdw is
11 bits. Thus we can safely store all of these values in
u16.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
.../drm/i915/display/intel_display_types.h | 8 +-
drivers/gpu/drm/i915/intel_pm.c | 74 +++++++++----------
2 files changed, 40 insertions(+), 42 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index f6f0626649e0..4c25e2e4f4ee 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -666,10 +666,10 @@ struct intel_crtc_scaler_state {
struct intel_wm_level {
bool enable;
- u32 pri_val;
- u32 spr_val;
- u32 cur_val;
- u32 fbc_val;
+ u16 pri_val;
+ u16 spr_val;
+ u16 cur_val;
+ u16 fbc_val;
};
struct intel_pipe_wm {
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 75d2322cd456..a82fb812b8c7 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -1225,9 +1225,9 @@ static bool g4x_raw_fbc_wm_set(struct intel_crtc_state *crtc_state,
return dirty;
}
-static u32 ilk_compute_fbc_wm(const struct intel_crtc_state *crtc_state,
+static u16 ilk_compute_fbc_wm(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state,
- u32 pri_val);
+ u16 pri_val);
static bool g4x_raw_plane_wm_compute(struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state)
@@ -2506,7 +2506,7 @@ static unsigned int ilk_wm_method1(unsigned int pixel_rate,
ret = intel_wm_method1(pixel_rate, cpp, latency);
ret = DIV_ROUND_UP(ret, 64) + 2;
- return ret;
+ return min_t(unsigned int, ret, U16_MAX);
}
/* latency must be in 0.1us units. */
@@ -2522,10 +2522,11 @@ static unsigned int ilk_wm_method2(unsigned int pixel_rate,
width, cpp, latency);
ret = DIV_ROUND_UP(ret, 64) + 2;
- return ret;
+ return min_t(unsigned int, ret, U16_MAX);
}
-static u32 ilk_wm_fbc(u32 pri_val, u32 horiz_pixels, u8 cpp)
+static u16 ilk_wm_fbc(u16 pri_val, unsigned int horiz_pixels,
+ unsigned int cpp)
{
/*
* Neither of these should be possible since this function shouldn't be
@@ -2552,15 +2553,15 @@ struct ilk_wm_maximums {
* For both WM_PIPE and WM_LP.
* mem_value must be in 0.1us units.
*/
-static u32 ilk_compute_pri_wm(const struct intel_crtc_state *crtc_state,
+static u16 ilk_compute_pri_wm(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state,
- u32 mem_value, bool is_lp)
+ unsigned int mem_value, bool is_lp)
{
- u32 method1, method2;
+ u16 method1, method2;
int cpp;
if (mem_value == 0)
- return U32_MAX;
+ return U16_MAX;
if (!intel_wm_plane_visible(crtc_state, plane_state))
return 0;
@@ -2584,15 +2585,15 @@ static u32 ilk_compute_pri_wm(const struct intel_crtc_state *crtc_state,
* For both WM_PIPE and WM_LP.
* mem_value must be in 0.1us units.
*/
-static u32 ilk_compute_spr_wm(const struct intel_crtc_state *crtc_state,
+static u16 ilk_compute_spr_wm(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state,
- u32 mem_value)
+ unsigned int mem_value)
{
- u32 method1, method2;
+ u16 method1, method2;
int cpp;
if (mem_value == 0)
- return U32_MAX;
+ return U16_MAX;
if (!intel_wm_plane_visible(crtc_state, plane_state))
return 0;
@@ -2611,14 +2612,14 @@ static u32 ilk_compute_spr_wm(const struct intel_crtc_state *crtc_state,
* For both WM_PIPE and WM_LP.
* mem_value must be in 0.1us units.
*/
-static u32 ilk_compute_cur_wm(const struct intel_crtc_state *crtc_state,
+static u16 ilk_compute_cur_wm(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state,
- u32 mem_value)
+ unsigned int mem_value)
{
int cpp;
if (mem_value == 0)
- return U32_MAX;
+ return U16_MAX;
if (!intel_wm_plane_visible(crtc_state, plane_state))
return 0;
@@ -2632,9 +2633,9 @@ static u32 ilk_compute_cur_wm(const struct intel_crtc_state *crtc_state,
}
/* Only for WM_LP. */
-static u32 ilk_compute_fbc_wm(const struct intel_crtc_state *crtc_state,
+static u16 ilk_compute_fbc_wm(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state,
- u32 pri_val)
+ u16 pri_val)
{
int cpp;
@@ -2647,8 +2648,7 @@ static u32 ilk_compute_fbc_wm(const struct intel_crtc_state *crtc_state,
cpp);
}
-static unsigned int
-ilk_display_fifo_size(const struct drm_i915_private *dev_priv)
+static u16 ilk_display_fifo_size(const struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) >= 8)
return 3072;
@@ -2658,9 +2658,8 @@ ilk_display_fifo_size(const struct drm_i915_private *dev_priv)
return 512;
}
-static unsigned int
-ilk_plane_wm_reg_max(const struct drm_i915_private *dev_priv,
- int level, bool is_sprite)
+static u16 ilk_plane_wm_reg_max(const struct drm_i915_private *dev_priv,
+ int level, bool is_sprite)
{
if (INTEL_GEN(dev_priv) >= 8)
/* BDW primary/sprite plane watermarks */
@@ -2676,8 +2675,7 @@ ilk_plane_wm_reg_max(const struct drm_i915_private *dev_priv,
return level == 0 ? 63 : 255;
}
-static unsigned int
-ilk_cursor_wm_reg_max(const struct drm_i915_private *dev_priv, int level)
+static u16 ilk_cursor_wm_reg_max(const struct drm_i915_private *dev_priv, int level)
{
if (INTEL_GEN(dev_priv) >= 7)
return level == 0 ? 63 : 255;
@@ -2685,7 +2683,7 @@ ilk_cursor_wm_reg_max(const struct drm_i915_private *dev_priv, int level)
return level == 0 ? 31 : 63;
}
-static unsigned int ilk_fbc_wm_reg_max(const struct drm_i915_private *dev_priv)
+static u16 ilk_fbc_wm_reg_max(const struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) >= 8)
return 31;
@@ -2694,13 +2692,13 @@ static unsigned int ilk_fbc_wm_reg_max(const struct drm_i915_private *dev_priv)
}
/* Calculate the maximum primary/sprite plane watermark */
-static unsigned int ilk_plane_wm_max(const struct drm_i915_private *dev_priv,
- int level,
- const struct intel_wm_config *config,
- enum intel_ddb_partitioning ddb_partitioning,
- bool is_sprite)
+static u16 ilk_plane_wm_max(const struct drm_i915_private *dev_priv,
+ int level,
+ const struct intel_wm_config *config,
+ enum intel_ddb_partitioning ddb_partitioning,
+ bool is_sprite)
{
- unsigned int fifo_size = ilk_display_fifo_size(dev_priv);
+ u16 fifo_size = ilk_display_fifo_size(dev_priv);
/* if sprites aren't enabled, sprites get nothing */
if (is_sprite && !config->sprites_enabled)
@@ -2735,9 +2733,9 @@ static unsigned int ilk_plane_wm_max(const struct drm_i915_private *dev_priv,
}
/* Calculate the maximum cursor plane watermark */
-static unsigned int ilk_cursor_wm_max(const struct drm_i915_private *dev_priv,
- int level,
- const struct intel_wm_config *config)
+static u16 ilk_cursor_wm_max(const struct drm_i915_private *dev_priv,
+ int level,
+ const struct intel_wm_config *config)
{
/* HSW LP1+ watermarks w/ multiple pipes */
if (level > 0 && config->num_pipes_active > 1)
@@ -2801,9 +2799,9 @@ static bool ilk_validate_wm_level(int level,
DRM_DEBUG_KMS("Cursor WM%d too large %u (max %u)\n",
level, result->cur_val, max->cur);
- result->pri_val = min_t(u32, result->pri_val, max->pri);
- result->spr_val = min_t(u32, result->spr_val, max->spr);
- result->cur_val = min_t(u32, result->cur_val, max->cur);
+ result->pri_val = min(result->pri_val, max->pri);
+ result->spr_val = min(result->spr_val, max->spr);
+ result->cur_val = min(result->cur_val, max->cur);
result->enable = true;
}
--
2.26.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-10-30 16:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-30 16:50 [Intel-gfx] [PATCH 00/10] drm/i915: ilk+ wm cleanups Ville Syrjala
2020-10-30 16:50 ` [Intel-gfx] [PATCH 01/10] drm/i915: s/USHRT_MAX/U16_MAX/ Ville Syrjala
2020-10-30 16:50 ` Ville Syrjala [this message]
2020-10-30 16:50 ` [Intel-gfx] [PATCH 03/10] drm/i915: Rename ilk watermark structs/enums Ville Syrjala
2020-10-30 16:50 ` [Intel-gfx] [PATCH 04/10] drm/i915: s/dev_priv->wm.hw/&dev_priv->wm.ilk/ Ville Syrjala
2020-10-30 16:50 ` [Intel-gfx] [PATCH 05/10] drm/i915: s/ilk_pipe_wm/ilk_wm_state/ Ville Syrjala
2020-10-30 16:50 ` [Intel-gfx] [PATCH 06/10] drm/i915: Stash away the original SSKPD latency values Ville Syrjala
2020-10-30 16:50 ` [Intel-gfx] [PATCH 07/10] drm/i915: Remove gen6_check_mch_setup() Ville Syrjala
2020-10-30 16:50 ` [Intel-gfx] [PATCH 08/10] drm/i915: Add REG_GENMASK64() and REG_FIELD_GET64() Ville Syrjala
2020-10-30 16:50 ` [Intel-gfx] [PATCH 09/10] drm/i915: Clean up SSKPD/MLTR defines Ville Syrjala
2020-10-30 20:52 ` kernel test robot
2020-11-15 10:54 ` kernel test robot
2020-10-30 16:50 ` [Intel-gfx] [PATCH 10/10] drm/i915: Polish ilk+ wm regidster bits Ville Syrjala
2020-10-30 17:43 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: ilk+ wm cleanups Patchwork
2020-10-30 18:11 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-10-30 18:11 ` [Intel-gfx] ✗ Fi.CI.BUILD: warning " Patchwork
2020-10-30 22:21 ` [Intel-gfx] ✓ Fi.CI.IGT: success " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201030165045.5000-3-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox