From: Aditya Swarup <aditya.swarup@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>,
Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [Intel-gfx] [PATCH 2/9] drm/i915/adl_s: MCHBAR memory info registers are moved
Date: Tue, 26 Jan 2021 20:11:52 -0800 [thread overview]
Message-ID: <20210127041159.136409-3-aditya.swarup@intel.com> (raw)
In-Reply-To: <20210127041159.136409-1-aditya.swarup@intel.com>
From: Caz Yokoyama <caz.yokoyama@intel.com>
The crwebview indicates on ADL-S that some of our MCHBAR
registers have moved from their traditional 0x50XX offsets to
new locations. The meaning and bit layout of the registers
remain same.
v2: Simplify logic to a single if else chain and fix indents.(Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 5 +++++
drivers/gpu/drm/i915/intel_dram.c | 24 ++++++++++++++++++------
2 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index aa872446337b..3031897239a0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -10916,6 +10916,8 @@ enum skl_power_gate {
#define SKL_DRAM_DDR_TYPE_LPDDR3 (2 << 0)
#define SKL_DRAM_DDR_TYPE_LPDDR4 (3 << 0)
+#define ADLS_MAD_INTER_CHANNEL_0_0_0_MCHBAR _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x6048)
+
#define SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x500C)
#define SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5010)
#define SKL_DRAM_S_SHIFT 16
@@ -10943,6 +10945,9 @@ enum skl_power_gate {
#define CNL_DRAM_RANK_3 (0x2 << 9)
#define CNL_DRAM_RANK_4 (0x3 << 9)
+#define ADLS_MAD_DIMM_CH0_0_0_0_MCHBAR _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x6054)
+#define ADLS_MAD_DIMM_CH1_0_0_0_MCHBAR _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x6058)
+
/*
* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
* since on HSW we can't write to it using intel_uncore_write.
diff --git a/drivers/gpu/drm/i915/intel_dram.c b/drivers/gpu/drm/i915/intel_dram.c
index 4754296a250e..84f84e118531 100644
--- a/drivers/gpu/drm/i915/intel_dram.c
+++ b/drivers/gpu/drm/i915/intel_dram.c
@@ -181,17 +181,24 @@ skl_dram_get_channels_info(struct drm_i915_private *i915)
{
struct dram_info *dram_info = &i915->dram_info;
struct dram_channel_info ch0 = {}, ch1 = {};
+ i915_reg_t ch0_reg, ch1_reg;
u32 val;
int ret;
- val = intel_uncore_read(&i915->uncore,
- SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
+ if (IS_ALDERLAKE_S(i915)) {
+ ch0_reg = ADLS_MAD_DIMM_CH0_0_0_0_MCHBAR;
+ ch1_reg = ADLS_MAD_DIMM_CH1_0_0_0_MCHBAR;
+ } else {
+ ch0_reg = ADLS_MAD_DIMM_CH0_0_0_0_MCHBAR;
+ ch1_reg = ADLS_MAD_DIMM_CH1_0_0_0_MCHBAR;
+ }
+
+ val = intel_uncore_read(&i915->uncore, ch0_reg);
ret = skl_dram_get_channel_info(i915, &ch0, 0, val);
if (ret == 0)
dram_info->num_channels++;
- val = intel_uncore_read(&i915->uncore,
- SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
+ val = intel_uncore_read(&i915->uncore, ch1_reg);
ret = skl_dram_get_channel_info(i915, &ch1, 1, val);
if (ret == 0)
dram_info->num_channels++;
@@ -229,10 +236,15 @@ skl_dram_get_channels_info(struct drm_i915_private *i915)
static enum intel_dram_type
skl_get_dram_type(struct drm_i915_private *i915)
{
+ i915_reg_t reg;
u32 val;
- val = intel_uncore_read(&i915->uncore,
- SKL_MAD_INTER_CHANNEL_0_0_0_MCHBAR_MCMAIN);
+ if (IS_ALDERLAKE_S(i915))
+ reg = ADLS_MAD_INTER_CHANNEL_0_0_0_MCHBAR;
+ else
+ reg = SKL_MAD_INTER_CHANNEL_0_0_0_MCHBAR_MCMAIN;
+
+ val = intel_uncore_read(&i915->uncore, reg);
switch (val & SKL_DRAM_DDR_TYPE_MASK) {
case SKL_DRAM_DDR_TYPE_DDR3:
--
2.27.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-01-27 4:12 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-27 4:11 [Intel-gfx] [PATCH 0/9] Final set of patches for ADLS enabling Aditya Swarup
2021-01-27 4:11 ` [Intel-gfx] [PATCH 1/9] drm/i915/adl_s: Update PHY_MISC programming Aditya Swarup
2021-01-27 4:16 ` Aditya Swarup
2021-01-27 4:11 ` Aditya Swarup [this message]
2021-01-27 15:07 ` [Intel-gfx] [PATCH 2/9] drm/i915/adl_s: MCHBAR memory info registers are moved Lucas De Marchi
2021-01-27 16:48 ` Souza, Jose
2021-01-28 5:54 ` Aditya Swarup
2021-01-27 4:11 ` [Intel-gfx] [PATCH 3/9] drm/i915/adl_s: Add power wells Aditya Swarup
2021-01-27 4:14 ` Aditya Swarup
2021-01-27 5:32 ` Matt Roper
2021-01-27 4:11 ` [Intel-gfx] [PATCH 4/9] drm/i915/adl_s: Re-use TGL GuC/HuC firmware Aditya Swarup
2021-01-27 4:11 ` [Intel-gfx] [PATCH 5/9] drm/i915/display: Add HAS_D12_PLANE_MINIMIZATION Aditya Swarup
2021-01-27 4:11 ` [Intel-gfx] [PATCH 6/9] drm/i915/adl_s: Load DMC Aditya Swarup
2021-01-27 4:15 ` Aditya Swarup
2021-01-27 15:15 ` Lucas De Marchi
2021-01-27 4:11 ` [Intel-gfx] [PATCH 7/9] drm/i915/adl_s: Update memory bandwidth parameters Aditya Swarup
2021-01-27 5:18 ` Matt Roper
2021-01-27 4:11 ` [Intel-gfx] [PATCH 8/9] drm/i915/adl_s: Add display WAs for ADL-S Aditya Swarup
2021-01-27 5:22 ` Matt Roper
2021-01-28 5:43 ` Aditya Swarup
2021-01-29 17:26 ` Souza, Jose
2021-01-27 4:11 ` [Intel-gfx] [PATCH 9/9] drm/i915/adl_s: Add GT and CTX " Aditya Swarup
2021-01-27 5:27 ` Matt Roper
2021-01-27 4:25 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Final set of patches for ADLS enabling Patchwork
2021-01-27 4:27 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-01-27 4:55 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-01-27 9:45 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2021-01-28 5:30 [Intel-gfx] [PATCH 0/9] " Aditya Swarup
2021-01-28 5:30 ` [Intel-gfx] [PATCH 2/9] drm/i915/adl_s: MCHBAR memory info registers are moved Aditya Swarup
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210127041159.136409-3-aditya.swarup@intel.com \
--to=aditya.swarup@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=lucas.demarchi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox