From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v2 12/23] drm/i915/xelpd: Handle new location of outputs D and E
Date: Thu, 11 Mar 2021 07:34:04 -0800 [thread overview]
Message-ID: <20210311153415.3024607-13-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210311153415.3024607-1-matthew.d.roper@intel.com>
The DDI naming template for display version 12 went A-C, TC1-TC6. With
XE_LPD, that naming scheme for DDI's has now changed to A-E, TC1-TC4.
The XE_LPD design keeps the register offsets and bitfields relating to
the TC outputs in the same location they were previously. The new "D"
and "E" outputs now take the locations that were previously used by TC5
and TC6 outputs, or what we would have considered to be outputs "H" and
"I" under the legacy lettering scheme.
For the most part everything will just work as long as we initialize the
output with the proper 'enum port' value. However we do need to take
care to pick the correct AUX channel when parsing the VBT (e.g., a
reference to 'AUX D' is actually asking us to use the 8th aux channel,
not the fourth). We should also make sure that our encoders and aux
channels are named appropriately so that it's easier to correlate driver
debug messages with the bspec instructions.
v2:
- Update handling of TGL_TRANS_CLK_SEL_PORT. (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/i915/display/intel_bios.c | 8 +++++--
drivers/gpu/drm/i915/display/intel_ddi.c | 25 +++++++++++++-------
drivers/gpu/drm/i915/display/intel_display.c | 6 ++++-
drivers/gpu/drm/i915/display/intel_display.h | 8 +++++++
drivers/gpu/drm/i915/display/intel_dp_aux.c | 14 +++++++----
5 files changed, 44 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
index 7d438d16973c..e4cef54726b4 100644
--- a/drivers/gpu/drm/i915/display/intel_bios.c
+++ b/drivers/gpu/drm/i915/display/intel_bios.c
@@ -2770,7 +2770,9 @@ enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *dev_priv,
aux_ch = AUX_CH_C;
break;
case DP_AUX_D:
- if (IS_ALDERLAKE_S(dev_priv))
+ if (DISPLAY_VER(dev_priv) >= 13)
+ aux_ch = AUX_CH_D_XELPD;
+ else if (IS_ALDERLAKE_S(dev_priv))
aux_ch = AUX_CH_USBC3;
else if (IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
aux_ch = AUX_CH_USBC2;
@@ -2778,7 +2780,9 @@ enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *dev_priv,
aux_ch = AUX_CH_D;
break;
case DP_AUX_E:
- if (IS_ALDERLAKE_S(dev_priv))
+ if (DISPLAY_VER(dev_priv) >= 13)
+ aux_ch = AUX_CH_E_XELPD;
+ else if (IS_ALDERLAKE_S(dev_priv))
aux_ch = AUX_CH_USBC4;
else
aux_ch = AUX_CH_E;
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 9e677220f276..f404547bb95a 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -850,18 +850,19 @@ void intel_ddi_enable_pipe_clock(struct intel_encoder *encoder,
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- enum port port = encoder->port;
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+ enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+ u32 val;
if (cpu_transcoder != TRANSCODER_EDP) {
- if (DISPLAY_VER(dev_priv) >= 12)
- intel_de_write(dev_priv,
- TRANS_CLK_SEL(cpu_transcoder),
- TGL_TRANS_CLK_SEL_PORT(port));
+ if (DISPLAY_VER(dev_priv) >= 13)
+ val = TGL_TRANS_CLK_SEL_PORT(phy);
+ else if (DISPLAY_VER(dev_priv) >= 12)
+ val = TGL_TRANS_CLK_SEL_PORT(encoder->port);
else
- intel_de_write(dev_priv,
- TRANS_CLK_SEL(cpu_transcoder),
- TRANS_CLK_SEL_PORT(port));
+ val = TRANS_CLK_SEL_PORT(encoder->port);
+
+ intel_de_write(dev_priv, TRANS_CLK_SEL(cpu_transcoder), val);
}
}
@@ -4461,7 +4462,13 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
encoder = &dig_port->base;
- if (DISPLAY_VER(dev_priv) >= 12) {
+ if (DISPLAY_VER(dev_priv) >= 13 && port >= PORT_D_XELPD) {
+ drm_encoder_init(&dev_priv->drm, &encoder->base, &intel_ddi_funcs,
+ DRM_MODE_ENCODER_TMDS,
+ "DDI %c/PHY %c",
+ port_name(port - PORT_D_XELPD + PORT_D),
+ phy_name(phy));
+ } else if (DISPLAY_VER(dev_priv) >= 12) {
enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
drm_encoder_init(&dev_priv->drm, &encoder->base, &intel_ddi_funcs,
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 10cedd4d6828..926707fd00e3 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -4174,7 +4174,11 @@ bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy)
enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port)
{
- if (IS_ALDERLAKE_S(i915) && port >= PORT_TC1)
+ if (DISPLAY_VER(i915) >= 13 && port >= PORT_D_XELPD)
+ return PHY_D + port - PORT_D_XELPD;
+ else if (DISPLAY_VER(i915) >= 13 && port >= PORT_TC1)
+ return PHY_F + port - PORT_TC1;
+ else if (IS_ALDERLAKE_S(i915) && port >= PORT_TC1)
return PHY_B + port - PORT_TC1;
else if ((IS_DG1(i915) || IS_ROCKETLAKE(i915)) && port >= PORT_TC1)
return PHY_C + port - PORT_TC1;
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index 431770eeadb4..13d5d7909411 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -217,6 +217,10 @@ enum port {
PORT_TC5,
PORT_TC6,
+ /* XE_LPD repositions D/E offsets and bitfields */
+ PORT_D_XELPD = PORT_TC5,
+ PORT_E_XELPD,
+
I915_MAX_PORTS
};
@@ -300,6 +304,10 @@ enum aux_ch {
AUX_CH_USBC4,
AUX_CH_USBC5,
AUX_CH_USBC6,
+
+ /* XE_LPD repositions D/E offsets and bitfields */
+ AUX_CH_D_XELPD = AUX_CH_USBC5,
+ AUX_CH_E_XELPD,
};
#define aux_ch_name(a) ((a) + 'A')
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux.c b/drivers/gpu/drm/i915/display/intel_dp_aux.c
index b7eee37d040a..42eaf6acc9c4 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux.c
@@ -600,8 +600,8 @@ static i915_reg_t tgl_aux_ctl_reg(struct intel_dp *intel_dp)
case AUX_CH_USBC2:
case AUX_CH_USBC3:
case AUX_CH_USBC4:
- case AUX_CH_USBC5:
- case AUX_CH_USBC6:
+ case AUX_CH_USBC5: /* aka AUX_CH_D_XELPD */
+ case AUX_CH_USBC6: /* aka AUX_CH_E_XELPD */
return DP_AUX_CH_CTL(aux_ch);
default:
MISSING_CASE(aux_ch);
@@ -623,8 +623,8 @@ static i915_reg_t tgl_aux_data_reg(struct intel_dp *intel_dp, int index)
case AUX_CH_USBC2:
case AUX_CH_USBC3:
case AUX_CH_USBC4:
- case AUX_CH_USBC5:
- case AUX_CH_USBC6:
+ case AUX_CH_USBC5: /* aka AUX_CH_D_XELPD */
+ case AUX_CH_USBC6: /* aka AUX_CH_E_XELPD */
return DP_AUX_CH_DATA(aux_ch, index);
default:
MISSING_CASE(aux_ch);
@@ -678,7 +678,11 @@ void intel_dp_aux_init(struct intel_dp *intel_dp)
drm_dp_aux_init(&intel_dp->aux);
/* Failure to allocate our preferred name is not critical */
- if (DISPLAY_VER(dev_priv) >= 12 && aux_ch >= AUX_CH_USBC1)
+ if (DISPLAY_VER(dev_priv) >= 13 && aux_ch >= AUX_CH_D_XELPD)
+ intel_dp->aux.name = kasprintf(GFP_KERNEL, "AUX %c/%s",
+ aux_ch_name(aux_ch - AUX_CH_D_XELPD + AUX_CH_D),
+ encoder->base.name);
+ else if (DISPLAY_VER(dev_priv) >= 12 && aux_ch >= AUX_CH_USBC1)
intel_dp->aux.name = kasprintf(GFP_KERNEL, "AUX USBC%c/%s",
aux_ch - AUX_CH_USBC1 + '1',
encoder->base.name);
--
2.25.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-03-11 15:34 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 15:33 [Intel-gfx] [PATCH v2 00/23] Separate display version numbering and add XE_LPD (version 13) Matt Roper
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 01/23] drm/i915/display: Convert gen5/gen6 tests to IS_IRONLAKE/IS_SANDYBRIDGE Matt Roper
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 02/23] drm/i915: Add DISPLAY_VER() Matt Roper
2021-03-17 17:45 ` Jani Nikula
2021-03-19 20:49 ` Matt Roper
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 03/23] drm/i915/display: Eliminate most usage of INTEL_GEN() Matt Roper
2021-03-15 20:14 ` Lucas De Marchi
2021-03-17 17:57 ` Jani Nikula
2021-03-17 18:37 ` Lucas De Marchi
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 04/23] drm/i915: Convert INTEL_GEN() to DISPLAY_VER() as appropriate in intel_pm.c Matt Roper
2021-03-15 20:17 ` Lucas De Marchi
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 05/23] drm/i915: Convert INTEL_GEN() to DISPLAY_VER() as appropriate in i915_irq.c Matt Roper
2021-03-15 20:19 ` Lucas De Marchi
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 06/23] drm/i915/display: Simplify GLK display version tests Matt Roper
2021-03-15 20:21 ` Lucas De Marchi
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 07/23] drm/i915/xelpd: add XE_LPD display characteristics Matt Roper
2021-03-17 17:15 ` Jani Nikula
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 08/23] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 09/23] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 10/23] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 11/23] drm/i915/xelpd: Support 128k plane stride Matt Roper
2021-03-11 15:34 ` Matt Roper [this message]
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 13/23] drm/i915/xelpd: Add XE_LPD power wells Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 14/23] drm/i915/xelpd: Handle LPSP for XE_LPD Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 15/23] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 16/23] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 17/23] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 18/23] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 19/23] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 20/23] drm/i915: Get slice height before computing rc params Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 21/23] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 22/23] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 23/23] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-03-11 16:02 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Separate display version numbering and add XE_LPD (version 13) Patchwork
2021-03-11 16:04 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-03-11 16:29 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-03-11 18:36 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210311153415.3024607-13-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox