From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v2 15/23] drm/i915/xelpd: Increase maximum watermark lines to 255
Date: Thu, 11 Mar 2021 07:34:07 -0800 [thread overview]
Message-ID: <20210311153415.3024607-16-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210311153415.3024607-1-matthew.d.roper@intel.com>
XE_LPD continues to use the same "skylake-style" watermark
programming as other recent platforms. The only change to the watermark
calculations compared to Display12 is that XE_LPD now allows a
maximum of 255 lines vs the old limit of 31.
Due to the larger possible lines value, the corresponding bits
representing the value in PLANE_WM are also extended, so make sure we
read/write enough bits. Let's also take this opportunity to switch over
to the REG_FIELD notation.
Bspec: 49325
Bspec: 50419
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 3 +--
drivers/gpu/drm/i915/intel_pm.c | 15 +++++++++++----
2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 981901b67916..348b94a69b96 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6425,8 +6425,7 @@ enum {
#define _CUR_WM_TRANS_B_0 0x71168
#define PLANE_WM_EN (1 << 31)
#define PLANE_WM_IGNORE_LINES (1 << 30)
-#define PLANE_WM_LINES_SHIFT 14
-#define PLANE_WM_LINES_MASK 0x1f
+#define PLANE_WM_LINES_MASK REG_GENMASK(21, 14)
#define PLANE_WM_BLOCKS_MASK 0x7ff /* skl+: 10 bits, icl+ 11 bits */
#define _CUR_WM_0(pipe) _PIPE(pipe, _CUR_WM_A_0, _CUR_WM_B_0)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 2616b1845719..0bad9cc76505 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5176,6 +5176,14 @@ static bool skl_wm_has_lines(struct drm_i915_private *dev_priv, int level)
return level > 0;
}
+static int skl_wm_max_lines(struct drm_i915_private *dev_priv)
+{
+ if (DISPLAY_VER(dev_priv) >= 13)
+ return 255;
+ else
+ return 31;
+}
+
static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
int level,
unsigned int latency,
@@ -5284,7 +5292,7 @@ static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
if (!skl_wm_has_lines(dev_priv, level))
res_lines = 0;
- if (res_lines > 31) {
+ if (res_lines > skl_wm_max_lines(dev_priv)) {
/* reject it */
result->min_ddb_alloc = U16_MAX;
return;
@@ -5579,7 +5587,7 @@ static void skl_write_wm_level(struct drm_i915_private *dev_priv,
if (level->ignore_lines)
val |= PLANE_WM_IGNORE_LINES;
val |= level->plane_res_b;
- val |= level->plane_res_l << PLANE_WM_LINES_SHIFT;
+ val |= REG_FIELD_PREP(PLANE_WM_LINES_MASK, level->plane_res_l);
intel_de_write_fw(dev_priv, reg, val);
}
@@ -6187,8 +6195,7 @@ static void skl_wm_level_from_reg_val(u32 val, struct skl_wm_level *level)
level->plane_en = val & PLANE_WM_EN;
level->ignore_lines = val & PLANE_WM_IGNORE_LINES;
level->plane_res_b = val & PLANE_WM_BLOCKS_MASK;
- level->plane_res_l = (val >> PLANE_WM_LINES_SHIFT) &
- PLANE_WM_LINES_MASK;
+ level->plane_res_l = REG_FIELD_GET(PLANE_WM_LINES_MASK, val);
}
void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
--
2.25.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-03-11 15:34 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 15:33 [Intel-gfx] [PATCH v2 00/23] Separate display version numbering and add XE_LPD (version 13) Matt Roper
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 01/23] drm/i915/display: Convert gen5/gen6 tests to IS_IRONLAKE/IS_SANDYBRIDGE Matt Roper
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 02/23] drm/i915: Add DISPLAY_VER() Matt Roper
2021-03-17 17:45 ` Jani Nikula
2021-03-19 20:49 ` Matt Roper
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 03/23] drm/i915/display: Eliminate most usage of INTEL_GEN() Matt Roper
2021-03-15 20:14 ` Lucas De Marchi
2021-03-17 17:57 ` Jani Nikula
2021-03-17 18:37 ` Lucas De Marchi
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 04/23] drm/i915: Convert INTEL_GEN() to DISPLAY_VER() as appropriate in intel_pm.c Matt Roper
2021-03-15 20:17 ` Lucas De Marchi
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 05/23] drm/i915: Convert INTEL_GEN() to DISPLAY_VER() as appropriate in i915_irq.c Matt Roper
2021-03-15 20:19 ` Lucas De Marchi
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 06/23] drm/i915/display: Simplify GLK display version tests Matt Roper
2021-03-15 20:21 ` Lucas De Marchi
2021-03-11 15:33 ` [Intel-gfx] [PATCH v2 07/23] drm/i915/xelpd: add XE_LPD display characteristics Matt Roper
2021-03-17 17:15 ` Jani Nikula
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 08/23] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 09/23] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 10/23] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 11/23] drm/i915/xelpd: Support 128k plane stride Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 12/23] drm/i915/xelpd: Handle new location of outputs D and E Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 13/23] drm/i915/xelpd: Add XE_LPD power wells Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 14/23] drm/i915/xelpd: Handle LPSP for XE_LPD Matt Roper
2021-03-11 15:34 ` Matt Roper [this message]
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 16/23] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 17/23] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 18/23] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 19/23] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 20/23] drm/i915: Get slice height before computing rc params Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 21/23] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 22/23] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-03-11 15:34 ` [Intel-gfx] [PATCH v2 23/23] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-03-11 16:02 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Separate display version numbering and add XE_LPD (version 13) Patchwork
2021-03-11 16:04 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-03-11 16:29 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-03-11 18:36 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210311153415.3024607-16-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox