Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: "Jani Nikula" <jani.nikula@linux.intel.com>,
	"Ville Syrjälä" <ville.syrjala@linux.intel.com>
Subject: [PATCH v5 2/8] drm/i915/dp: Ensure panel power remains enabled during connector detection
Date: Fri, 25 Oct 2024 19:02:53 +0300	[thread overview]
Message-ID: <20241025160259.3088727-3-imre.deak@intel.com> (raw)
In-Reply-To: <20241025160259.3088727-1-imre.deak@intel.com>

The sink's capabilities, like the DSC caps, depend on the source OUI
written to the sink's DPCD registers and so this OUI value should be
valid for the whole duration of the detection. An eDP sink will reset
this OUI value when the panel power is disabled, so prevent the
disabling - happening by default after a 1 sec idle period - for the
whole duration of detection.

v2: Update the documentation for intel_pps_on(). (Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c  | 18 +++++++++++++-----
 drivers/gpu/drm/i915/display/intel_pps.c | 14 +++++++++++++-
 drivers/gpu/drm/i915/display/intel_pps.h |  1 +
 3 files changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index d2019c9ef8e91..69a4e9c86d386 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5616,6 +5616,8 @@ intel_dp_detect(struct drm_connector *connector,
 
 	intel_dp_flush_connector_commits(intel_connector);
 
+	intel_pps_vdd_on(intel_dp);
+
 	/* Can't disconnect eDP */
 	if (intel_dp_is_edp(intel_dp))
 		status = edp_detect(intel_dp);
@@ -5646,12 +5648,15 @@ intel_dp_detect(struct drm_connector *connector,
 
 		intel_dp_tunnel_disconnect(intel_dp);
 
-		goto out;
+		goto out_unset_edid;
 	}
 
 	ret = intel_dp_tunnel_detect(intel_dp, ctx);
-	if (ret == -EDEADLK)
-		return ret;
+	if (ret == -EDEADLK) {
+		status = ret;
+
+		goto out_vdd_off;
+	}
 
 	if (ret == 1)
 		intel_connector->base.epoch_counter++;
@@ -5679,7 +5684,7 @@ intel_dp_detect(struct drm_connector *connector,
 		 * with EDID on it
 		 */
 		status = connector_status_disconnected;
-		goto out;
+		goto out_unset_edid;
 	}
 
 	/*
@@ -5708,7 +5713,7 @@ intel_dp_detect(struct drm_connector *connector,
 
 	intel_dp_check_device_service_irq(intel_dp);
 
-out:
+out_unset_edid:
 	if (status != connector_status_connected && !intel_dp->is_mst)
 		intel_dp_unset_edid(intel_dp);
 
@@ -5717,6 +5722,9 @@ intel_dp_detect(struct drm_connector *connector,
 						 status,
 						 intel_dp->dpcd,
 						 intel_dp->downstream_ports);
+out_vdd_off:
+	intel_pps_vdd_off(intel_dp);
+
 	return status;
 }
 
diff --git a/drivers/gpu/drm/i915/display/intel_pps.c b/drivers/gpu/drm/i915/display/intel_pps.c
index ffeee9daa5689..73a2c9bdd2add 100644
--- a/drivers/gpu/drm/i915/display/intel_pps.c
+++ b/drivers/gpu/drm/i915/display/intel_pps.c
@@ -801,7 +801,8 @@ bool intel_pps_vdd_on_unlocked(struct intel_dp *intel_dp)
 }
 
 /*
- * Must be paired with intel_pps_off().
+ * Must be paired with intel_pps_vdd_off() or - to disable
+ * both VDD and panel power - intel_pps_off().
  * Nested calls to these functions are not allowed since
  * we drop the lock. Caller must use some higher level
  * locking to prevent nested calls from other threads.
@@ -950,6 +951,17 @@ void intel_pps_vdd_off_unlocked(struct intel_dp *intel_dp, bool sync)
 		edp_panel_vdd_schedule_off(intel_dp);
 }
 
+void intel_pps_vdd_off(struct intel_dp *intel_dp)
+{
+	intel_wakeref_t wakeref;
+
+	if (!intel_dp_is_edp(intel_dp))
+		return;
+
+	with_intel_pps_lock(intel_dp, wakeref)
+		intel_pps_vdd_off_unlocked(intel_dp, false);
+}
+
 void intel_pps_on_unlocked(struct intel_dp *intel_dp)
 {
 	struct intel_display *display = to_intel_display(intel_dp);
diff --git a/drivers/gpu/drm/i915/display/intel_pps.h b/drivers/gpu/drm/i915/display/intel_pps.h
index bc5046d536264..c83007152f07d 100644
--- a/drivers/gpu/drm/i915/display/intel_pps.h
+++ b/drivers/gpu/drm/i915/display/intel_pps.h
@@ -34,6 +34,7 @@ void intel_pps_off_unlocked(struct intel_dp *intel_dp);
 void intel_pps_check_power_unlocked(struct intel_dp *intel_dp);
 
 void intel_pps_vdd_on(struct intel_dp *intel_dp);
+void intel_pps_vdd_off(struct intel_dp *intel_dp);
 void intel_pps_on(struct intel_dp *intel_dp);
 void intel_pps_off(struct intel_dp *intel_dp);
 void intel_pps_vdd_off_sync(struct intel_dp *intel_dp);
-- 
2.44.2


  parent reply	other threads:[~2024-10-25 16:02 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-25 16:02 [PATCH v5 0/8] drm/i915: Write source OUI for non-eDP sinks Imre Deak
2024-10-25 16:02 ` [PATCH v5 1/8] drm/i915/dp: Flush modeset commits during connector detection Imre Deak
2024-10-25 16:02 ` Imre Deak [this message]
2024-10-25 16:02 ` [PATCH v5 3/8] drm/i915/dp: Initialize the source OUI write timestamp always Imre Deak
2024-10-25 16:02 ` [PATCH v5 4/8] drm/i915/dp: Track source OUI validity explicitly Imre Deak
2024-10-25 16:02 ` [PATCH v5 5/8] drm/i915/dp: Reuse intel_dp_detect_dsc_caps() for eDP Imre Deak
2024-10-25 16:02 ` [PATCH v5 6/8] drm/i915/dp: Write the source OUI for eDP before detecting sink capabilities Imre Deak
2024-10-25 16:02 ` [PATCH v5 7/8] drm/i915/dp: Write the source OUI during connector detection Imre Deak
2024-10-25 16:02 ` [PATCH v5 8/8] drm/i915/dp: Write the source OUI for non-eDP sinks as well Imre Deak
2024-10-28 15:20   ` Ville Syrjälä
2024-10-25 16:52 ` ✗ Fi.CI.SPARSE: warning for drm/i915: Write source OUI for non-eDP sinks (rev4) Patchwork
2024-10-25 17:09 ` ✓ Fi.CI.BAT: success " Patchwork
2024-10-25 22:12 ` ✗ Fi.CI.IGT: failure " Patchwork
2024-10-31 17:00   ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241025160259.3088727-3-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox