[PATCH v7 04/18] drm/i915/display: Add VRR DC balance registers

[Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>]

Add VRR register offsets and bits to access DC Balance configuration.

--v2:
- Separate register definitions. (Ankit)
- Remove usage of dev_priv. (Jani, Nikula)

--v3:
- Convert register address offset, from capital to small. (Ankit)
- Move mask bits near to register offsets. (Ankit)

--v4:
- Use _MMIO_TRANS wherever possible. (Jani)

Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_vrr_regs.h | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_vrr_regs.h b/drivers/gpu/drm/i915/display/intel_vrr_regs.h
index ba9b9215dc11..c5cba5879f40 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_vrr_regs.h
@@ -8,6 +8,50 @@
 
 #include "intel_display_reg_defs.h"
 
+/* VRR registers */
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A	0x604d4
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B	0x614d4
+#define TRANS_VRR_DCB_ADJ_FLIPLINE_CFG(trans)	_MMIO_TRANS(trans, \
+							    _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A, \
+							    _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B)
+#define VRR_DCB_ADJ_FLIPLINE_CNT_MASK		REG_GENMASK(31, 24)
+#define VRR_DCB_ADJ_FLIPLINE_MASK		REG_GENMASK(19, 0)
+#define VRR_DCB_ADJ_FLIPLINE(flipline)		REG_FIELD_PREP(VRR_DCB_ADJ_FLIPLINE_MASK, \
+							       (flipline))
+
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_A		0x604d8
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_B		0x614d8
+#define TRANS_VRR_DCB_ADJ_VMAX_CFG(trans)	_MMIO_TRANS(trans, \
+							    _TRANS_VRR_DCB_ADJ_VMAX_CFG_A, \
+							    _TRANS_VRR_DCB_ADJ_VMAX_CFG_B)
+#define VRR_DCB_ADJ_VMAX_CNT_MASK		REG_GENMASK(31, 24)
+#define VRR_DCB_ADJ_VMAX_MASK			REG_GENMASK(19, 0)
+#define VRR_DCB_ADJ_VMAX(vmax)			REG_FIELD_PREP(VRR_DCB_ADJ_VMAX_MASK, (vmax))
+
+#define _TRANS_VRR_DCB_FLIPLINE_A		0x60418
+#define _TRANS_VRR_DCB_FLIPLINE_B		0x61418
+#define TRANS_VRR_DCB_FLIPLINE(trans)		_MMIO_TRANS(trans, \
+							    _TRANS_VRR_DCB_FLIPLINE_A, \
+							    _TRANS_VRR_DCB_FLIPLINE_B)
+#define VRR_DCB_FLIPLINE_MASK			REG_GENMASK(19, 0)
+#define VRR_DCB_FLIPLINE(flipline)		REG_FIELD_PREP(VRR_DCB_FLIPLINE_MASK, \
+							       (flipline))
+
+#define _TRANS_VRR_DCB_VMAX_A			0x60414
+#define _TRANS_VRR_DCB_VMAX_B			0x61414
+#define TRANS_VRR_DCB_VMAX(trans)		_MMIO_TRANS(trans, \
+							     _TRANS_VRR_DCB_VMAX_A, \
+							     _TRANS_VRR_DCB_VMAX_B)
+#define VRR_DCB_VMAX_MASK			REG_GENMASK(19, 0)
+#define VRR_DCB_VMAX(vmax)			REG_FIELD_PREP(VRR_DCB_VMAX_MASK, (vmax))
+
+#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_A		0x604c0
+#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_B		0x614c0
+#define TRANS_ADAPTIVE_SYNC_DCB_CTL(trans)	_MMIO_TRANS(trans, \
+							     _TRANS_ADAPTIVE_SYNC_DCB_CTL_A, \
+							     _TRANS_ADAPTIVE_SYNC_DCB_CTL_B)
+#define ADAPTIVE_SYNC_COUNTER_EN		REG_BIT(31)
+
 #define _TRANS_VRR_CTL_A			0x60420
 #define _TRANS_VRR_CTL_B			0x61420
 #define _TRANS_VRR_CTL_C			0x62420
@@ -20,6 +64,7 @@
 #define   VRR_CTL_PIPELINE_FULL_MASK		REG_GENMASK(10, 3)
 #define   VRR_CTL_PIPELINE_FULL(x)		REG_FIELD_PREP(VRR_CTL_PIPELINE_FULL_MASK, (x))
 #define   VRR_CTL_PIPELINE_FULL_OVERRIDE	REG_BIT(0)
+#define   VRR_CTL_DCB_ADJ_ENABLE		REG_BIT(28)
 #define   XELPD_VRR_CTL_VRR_GUARDBAND_MASK	REG_GENMASK(15, 0)
 #define   XELPD_VRR_CTL_VRR_GUARDBAND(x)	REG_FIELD_PREP(XELPD_VRR_CTL_VRR_GUARDBAND_MASK, (x))
 
-- 
2.48.1