* Re: Intel graphics drm issue? [not found] <507812E8.3060607@compro.net> @ 2012-10-12 21:14 ` Bruno Prémont 2012-10-13 18:57 ` Mark Hounschell 0 siblings, 1 reply; 25+ messages in thread From: Bruno Prémont @ 2012-10-12 21:14 UTC (permalink / raw) To: markh; +Cc: linux-kernel, Mark Hounschell, Intel Graphics Development Hi Mark, [CCing intel-gfx] On Fri, 12 October 2012 Mark Hounschell <markh@compro.net> wrote: > Not sure this is the correct place to ask about a possible drm issue. I > have an intel based PC with an HDMI port that I'm trying to connect to > an LG TV. I have successfully used this HDMI port connected to an Optima > projector. Using that projector, everything from the BIOS post, BIOS > configuration, and all the way up to a graphical login worked just fine. > The same HDMI port and cable connected to this TV gives me the below > messages during boot. I also get no BIOS post or BIOS configuration > output while in the BIOS. I have a monitor connected to the DVI port so > I can see what I should see on the TV there, just as when I was > connected to the Optima projector. That alone makes me pretty sure it's > not a kernel issue but here are the messages anyway. Maybe they will > give someone a hint as to what the problem may be, in the case they > might be willing to give me any pointers. > > TV - LG 42lb9df > PC - intel DH77DF motherboard > [ 0.000000] Linux version 3.4.10-lcrs (root@geexbox) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Wed Oct 10 16:16:16 EDT 2012 > ... > [ 1.897955] [drm] MTRR allocation failed. Graphics performance may suffer. > [ 1.898045] i915 0000:00:02.0: irq 43 for MSI/MSI-X > [ 1.898050] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 1.898051] [drm] Driver supports precise vblank timestamp query. > [ 1.898084] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed > [ 1.898737] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 1.995523] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off > [ 2.299535] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 128 > [ 2.299865] Raw EDID: > [ 2.299957] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 2.300188] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 2.300418] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 2.300648] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 2.300879] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 2.301109] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 2.301339] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 2.301569] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff This looks like your LG TV either does not provide EDID information via HDMI connector, or otherwise behaves in a special way which makes reading EDID fail. Did you try the TV on some other computer to check if EDID can be read there (e.g. with nvidia/amd GPU and matching open/closed driver)? Also make sure the TV is on (neither off nor on stand-by) as some TVs disable too much of connector interface in those states. > [ 2.434378] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. > [ 2.477539] checking generic (e0000000 3ff0000) vs hw (e0000000 10000000) > [ 2.477541] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver > [ 2.477549] Console: switching to colour dummy device 80x25 > [ 2.477831] fbcon: inteldrmfb (fb0) is primary device > [ 2.637915] Console: switching to colour frame buffer device 128x48 > [ 2.679625] fb0: inteldrmfb frame buffer device > [ 2.679626] drm: registered panic notifier > [ 2.691536] acpi device:4b: registered as cooling_device9 > [ 2.691660] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 > [ 2.691698] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) > [ 2.691709] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > geexbox:/home/mplayer # lspci > 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09) > ... > 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) > ... Note, usually `lspci -nn` is more informative as it also provides vendor/device IDs in addition to nice names. Bruno ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-12 21:14 ` Intel graphics drm issue? Bruno Prémont @ 2012-10-13 18:57 ` Mark Hounschell 2012-10-13 19:17 ` Mark Hounschell 0 siblings, 1 reply; 25+ messages in thread From: Mark Hounschell @ 2012-10-13 18:57 UTC (permalink / raw) To: Bruno Prémont; +Cc: markh, linux-kernel, Intel Graphics Development [-- Attachment #1: Type: text/plain, Size: 7412 bytes --] Hi Bruno, Thanks for the response. On 10/12/2012 05:14 PM, Bruno Prémont wrote: > Hi Mark, > > [CCing intel-gfx] > > On Fri, 12 October 2012 Mark Hounschell <markh@compro.net> wrote: >> Not sure this is the correct place to ask about a possible drm issue. I >> have an intel based PC with an HDMI port that I'm trying to connect to >> an LG TV. I have successfully used this HDMI port connected to an Optima >> projector. Using that projector, everything from the BIOS post, BIOS >> configuration, and all the way up to a graphical login worked just fine. >> The same HDMI port and cable connected to this TV gives me the below >> messages during boot. I also get no BIOS post or BIOS configuration >> output while in the BIOS. I have a monitor connected to the DVI port so >> I can see what I should see on the TV there, just as when I was >> connected to the Optima projector. That alone makes me pretty sure it's >> not a kernel issue but here are the messages anyway. Maybe they will >> give someone a hint as to what the problem may be, in the case they >> might be willing to give me any pointers. >> >> TV - LG 42lb9df >> PC - intel DH77DF motherboard > >> [ 0.000000] Linux version 3.4.10-lcrs (root@geexbox) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Wed Oct 10 16:16:16 EDT 2012 >> ... >> [ 1.897955] [drm] MTRR allocation failed. Graphics performance may suffer. >> [ 1.898045] i915 0000:00:02.0: irq 43 for MSI/MSI-X >> [ 1.898050] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >> [ 1.898051] [drm] Driver supports precise vblank timestamp query. >> [ 1.898084] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed >> [ 1.898737] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem >> [ 1.995523] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off >> [ 2.299535] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 128 >> [ 2.299865] Raw EDID: >> [ 2.299957] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> [ 2.300188] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> [ 2.300418] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> [ 2.300648] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> [ 2.300879] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> [ 2.301109] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> [ 2.301339] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> [ 2.301569] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > This looks like your LG TV either does not provide EDID information via HDMI > connector, or otherwise behaves in a special way which makes reading EDID > fail. > > Did you try the TV on some other computer to check if EDID can be read there > (e.g. with nvidia/amd GPU and matching open/closed driver)? > > Also make sure the TV is on (neither off nor on stand-by) as some TVs > disable too much of connector interface in those states. > I have another AMD based PC here with an nvidia card and HDMI port. Using the nvidia driver, it boots up with no output to the tv until X starts. Once X starts I get my kdm login screen. All is well except the resolution is 800x600 and I have no VTs. I suspect if I had a properly configured xorg.conf file, my resolution would be what I defined in it and work. Using the nouveau driver, I get nothing but "no signal" on the tv. Just like the the intel box, except no EDID messages in the log file. I've attached a dmesg outputs for each config. Back on the Intel machine. I boot up with a normal monitor connected to the DVI port of the PC. Then at the kdm login screen, I disconnect the DVI cable from the PC and connect the TV to the PCs DVI port using a DVI/HDMI adapter. I get a beautiful 1600x1200 resolution screen on the TV. This does not happen using the PC HDMI port. I have no control over the tv with regards to stand-by mode. Off is standby mode, on is on. >> [ 2.434378] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. >> [ 2.477539] checking generic (e0000000 3ff0000) vs hw (e0000000 10000000) >> [ 2.477541] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver >> [ 2.477549] Console: switching to colour dummy device 80x25 >> [ 2.477831] fbcon: inteldrmfb (fb0) is primary device >> [ 2.637915] Console: switching to colour frame buffer device 128x48 >> [ 2.679625] fb0: inteldrmfb frame buffer device >> [ 2.679626] drm: registered panic notifier >> [ 2.691536] acpi device:4b: registered as cooling_device9 >> [ 2.691660] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 >> [ 2.691698] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) >> [ 2.691709] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > >> geexbox:/home/mplayer # lspci >> 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09) >> ... >> 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) >> ... > > Note, usually `lspci -nn` is more informative as it also provides vendor/device > IDs in addition to nice names. # lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 [8086:1e1e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC Controller [8086:1e4a] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge [10b5:8112] (rev aa) 02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788] I can do more to help if asked. Regards Mark [-- Attachment #2: dmesg.nvidia-hdmi --] [-- Type: text/plain, Size: 57191 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37.6-0.20-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-12-19 23:39:38 +0100 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000affe0000 (usable) [ 0.000000] BIOS-e820: 00000000affe0000 - 00000000affe3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000affe3000 - 00000000afff0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: BIOSTAR Group A78XA-A2T/TA770 A2+, BIOS 6.00 PG 06/12/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x150000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back [ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back [ 0.000000] 3 base 0100000000 mask FFC0000000 write-back [ 0.000000] 4 base 0140000000 mask FFF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000150000000 aka 5376M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00f3f00] f3f00 [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00371fe000 page 4k [ 0.000000] kernel direct mapping tables up to 371fe000 @ ff6000-1000000 [ 0.000000] RAMDISK: 3758e000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 3679c000 - 371fdffa [ 0.000000] Move RAMDISK from 000000003758e000 - 0000000037fefff9 to 3679c000 - 371fdff9 [ 0.000000] ACPI: RSDP 000f7fb0 00024 (v02 RX780 ) [ 0.000000] ACPI: RSDT affe3000 00038 (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP affe3080 00074 (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT affe3100 05A71 (v01 RX780 AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS affe0000 00040 [ 0.000000] ACPI: SSDT affe8c40 00350 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET affe8fc0 00038 (v01 RX780 AWRDACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG affe9000 0003C (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC affe8b80 00084 (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] could not find any ACPI SRAT memory areas. [ 0.000000] failed to get NUMA memory information from SRAT table [ 0.000000] NUMA - single node, flat memory mode [ 0.000000] Node: 0, start_pfn: 0, end_pfn: 150000 [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 80000 84000 88000 8c000 90000 94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 b4000 b8000 bc000 c0000 c4000 c8000 cc000 d0000 d4000 d8000 dc000 e0000 e4000 e8000 ec000 f0000 f4000 f8000 fc000 100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 130000 134000 138000 13c000 140000 144000 148000 14c000 [ 0.000000] node 0 pfn: [0 - 150000] [ 0.000000] Reserving 11264 pages of KVA for lmem_map of node 0 at 14d400 [ 0.000000] Reserving total of 2c00 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 33a00 max_low_pfn ~ 371fe [ 0.000000] max_pfn = 150000 [ 0.000000] 4494MB HIGHMEM available. [ 0.000000] 881MB LOWMEM available. [ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe [ 0.000000] Low memory ends at vaddr f71fe000 [ 0.000000] node 0 will remap to vaddr f3a00000 - f6600000 [ 0.000000] allocate_pgdat: node 0 NODE_DATA f3a00000 [ 0.000000] remap_numa_kva: node 0 [ 0.000000] remap_numa_kva: f3a00000 to pfn 0014d400 [ 0.000000] remap_numa_kva: f3c00000 to pfn 0014d600 [ 0.000000] remap_numa_kva: f3e00000 to pfn 0014d800 [ 0.000000] remap_numa_kva: f4000000 to pfn 0014da00 [ 0.000000] remap_numa_kva: f4200000 to pfn 0014dc00 [ 0.000000] remap_numa_kva: f4400000 to pfn 0014de00 [ 0.000000] remap_numa_kva: f4600000 to pfn 0014e000 [ 0.000000] remap_numa_kva: f4800000 to pfn 0014e200 [ 0.000000] remap_numa_kva: f4a00000 to pfn 0014e400 [ 0.000000] remap_numa_kva: f4c00000 to pfn 0014e600 [ 0.000000] remap_numa_kva: f4e00000 to pfn 0014e800 [ 0.000000] remap_numa_kva: f5000000 to pfn 0014ea00 [ 0.000000] remap_numa_kva: f5200000 to pfn 0014ec00 [ 0.000000] remap_numa_kva: f5400000 to pfn 0014ee00 [ 0.000000] remap_numa_kva: f5600000 to pfn 0014f000 [ 0.000000] remap_numa_kva: f5800000 to pfn 0014f200 [ 0.000000] remap_numa_kva: f5a00000 to pfn 0014f400 [ 0.000000] remap_numa_kva: f5c00000 to pfn 0014f600 [ 0.000000] remap_numa_kva: f5e00000 to pfn 0014f800 [ 0.000000] remap_numa_kva: f6000000 to pfn 0014fa00 [ 0.000000] remap_numa_kva: f6200000 to pfn 0014fc00 [ 0.000000] remap_numa_kva: f6400000 to pfn 0014fe00 [ 0.000000] High memory starts at vaddr f71fe000 [ 0.000000] mapped low ram: 0 - 371fe000 [ 0.000000] low ram: 0 - 371fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000371fe [ 0.000000] HighMem 0x000371fe -> 0x00150000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000affe0 [ 0.000000] 0: 0x00100000 -> 0x00150000 [ 0.000000] On node 0 totalpages: 1048431 [ 0.000000] free_area_init_node: node 0, pgdat f3a00000, node_mem_map f3a02200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1732 pages used for memmap [ 0.000000] Normal zone: 219962 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8989 pages used for memmap [ 0.000000] HighMem zone: 813765 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:30000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f3800000 s28160 r0 d20992 u524288 [ 0.000000] pcpu-alloc: s28160 r0 d20992 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037678 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: root=/dev/sda5 resume=/dev/disk/by-id/ata-ST3250318AS_6VY3CK0B-part2 splash=silent quiet vga=0x31a nomodeset [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 27524800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000371fe:00150000) [ 0.000000] Memory: 4055300k/5505024k available (4704k kernel code, 93368k reserved, 3493k data, 452k init, 3245960k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB) [ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB) [ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB) [ 0.000000] .init : 0xc0a02000 - 0xc0a73000 ( 452 kB) [ 0.000000] .data : 0xc06980ad - 0xc0a01708 (3493 kB) [ 0.000000] .text : 0xc0200000 - 0xc06980ad (4704 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:8448 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f180c000 soft=f180e000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using HPET reference calibration [ 0.000000] Detected 3200.267 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.53 BogoMIPS (lpj=3200267) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004059] Security Framework initialized [ 0.004068] AppArmor: AppArmor initialized [ 0.004109] Mount-cache hash table entries: 512 [ 0.004189] Initializing cgroup subsys ns [ 0.004191] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004193] Initializing cgroup subsys cpuacct [ 0.004196] Initializing cgroup subsys memory [ 0.004204] Initializing cgroup subsys devices [ 0.004205] Initializing cgroup subsys freezer [ 0.004206] Initializing cgroup subsys net_cls [ 0.004208] Initializing cgroup subsys blkio [ 0.004230] CPU: Physical Processor ID: 0 [ 0.004231] CPU: Processor Core ID: 0 [ 0.004232] mce: CPU supports 5 MCE banks [ 0.004239] using C1E aware idle routine [ 0.004244] Performance Events: AMD PMU driver. [ 0.004246] ... version: 0 [ 0.004247] ... bit width: 48 [ 0.004248] ... generic registers: 4 [ 0.004250] ... value mask: 0000ffffffffffff [ 0.004251] ... max period: 00007fffffffffff [ 0.004252] ... fixed-purpose events: 0 [ 0.004253] ... event mask: 000000000000000f [ 0.004479] ACPI: Core revision 20101013 [ 0.012070] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.012377] Mapping cpu 0 to node 0 [ 0.013144] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023149] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03 [ 0.026011] NMI watchdog enabled, takes one hw-pmu counter. [ 0.030012] CPU 1 irqstacks, hard=f18a0000 soft=f18a2000 [ 0.030016] Booting Node 0, Processors #1 [ 0.004999] Initializing CPU#1 [ 0.004999] Mapping cpu 1 to node 0 [ 0.101087] NMI watchdog enabled, takes one hw-pmu counter. [ 0.102003] Brought up 2 CPUs [ 0.102005] Total of 2 processors activated (12800.61 BogoMIPS). [ 0.102238] devtmpfs: initialized [ 0.102238] regulator: core version 0.5 [ 0.102238] regulator: dummy: [ 0.102238] Time: 11:39:06 Date: 10/13/12 [ 0.102238] NET: Registered protocol family 16 [ 0.102323] node 0 link 0: io port [b000, ffff] [ 0.102325] TOM: 00000000b0000000 aka 2816M [ 0.102327] node 0 link 0: mmio [a0000, bffff] [ 0.102329] node 0 link 0: mmio [b0000000, dfffffff] [ 0.102331] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.102333] node 0 link 0: mmio [e0000000, e04fffff] [ 0.102335] TOM2: 0000000150000000 aka 5376M [ 0.102337] bus: [00, 04] on node 0 link 0 [ 0.102339] bus: 00 index 0 [io 0x0000-0xffff] [ 0.102340] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.102342] bus: 00 index 2 [mem 0xb0000000-0xefffffff] [ 0.102343] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.102345] bus: 00 index 4 [mem 0x150000000-0xfcffffffff] [ 0.102409] ACPI: bus type pci registered [ 0.102469] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.102472] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.102473] PCI: Using MMCONFIG for extended config space [ 0.102474] PCI: Using configuration type 1 for base access [ 0.103613] bio: create slab <bio-0> at 0 [ 0.104600] ACPI: EC: Look up EC in DSDT [ 0.105441] ACPI: Executed 1 blocks of module-level executable AML code [ 0.108567] ACPI: Interpreter enabled [ 0.108570] ACPI: (supports S0 S1 S4 S5) [ 0.108588] ACPI: Using IOAPIC for interrupt routing [ 0.112090] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.112155] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.112174] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.115375] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.115443] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.115846] ACPI: No dock devices found. [ 0.115849] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.115912] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.116056] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.116058] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.116060] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.116062] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.116064] pci_root PNP0A03:00: host bridge window [mem 0xafff0000-0xffffffff] [ 0.116079] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600 [ 0.116091] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.116121] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604 [ 0.116147] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.116150] pci 0000:00:02.0: PME# disabled [ 0.116167] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604 [ 0.116192] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.116194] pci 0000:00:06.0: PME# disabled [ 0.116207] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604 [ 0.116232] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.116234] pci 0000:00:07.0: PME# disabled [ 0.116265] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.116282] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07] [ 0.116292] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03] [ 0.116303] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07] [ 0.116313] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03] [ 0.116323] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f] [ 0.116333] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.116355] pci 0000:00:12.0: set SATA to AHCI mode [ 0.116383] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.116397] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.116464] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.116478] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.116543] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.116557] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.116624] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.116638] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.116703] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.116718] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.116790] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.116810] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.116884] pci 0000:00:13.5: supports D1 D2 [ 0.116885] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.116889] pci 0000:00:13.5: PME# disabled [ 0.116911] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.116934] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.117017] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.117030] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.117040] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.117050] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.117060] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.117070] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f] [ 0.117107] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.117130] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.117190] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.117194] pci 0000:00:14.2: PME# disabled [ 0.117208] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.117284] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.117329] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.117342] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.117353] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.117364] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.117415] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300 [ 0.117425] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.117436] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.117447] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.117455] pci 0000:01:00.0: reg 24: [io 0xcf00-0xcf7f] [ 0.117462] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.117506] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403 [ 0.117517] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff] [ 0.119012] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.119015] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.119018] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.119021] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xcfffffff 64bit pref] [ 0.119058] pci 0000:02:00.0: [197b:2363] type 0 class 0x000104 [ 0.119126] pci 0000:02:00.0: reg 24: [mem 0xfdffe000-0xfdffffff] [ 0.119137] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.119162] pci 0000:02:00.0: PME# supported from D3hot [ 0.119166] pci 0000:02:00.0: PME# disabled [ 0.119189] pci 0000:02:00.1: [197b:2363] type 0 class 0x000101 [ 0.119207] pci 0000:02:00.1: reg 10: [io 0xef00-0xef07] [ 0.119218] pci 0000:02:00.1: reg 14: [io 0xee00-0xee03] [ 0.119229] pci 0000:02:00.1: reg 18: [io 0xed00-0xed07] [ 0.119240] pci 0000:02:00.1: reg 1c: [io 0xec00-0xec03] [ 0.119251] pci 0000:02:00.1: reg 20: [io 0xeb00-0xeb0f] [ 0.119304] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.119314] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.119317] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.119320] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.119323] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.119362] pci 0000:03:00.0: [11ab:4364] type 0 class 0x000200 [ 0.119380] pci 0000:03:00.0: reg 10: [mem 0xfddfc000-0xfddfffff 64bit] [ 0.119389] pci 0000:03:00.0: reg 18: [io 0xde00-0xdeff] [ 0.119422] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.119451] pci 0000:03:00.0: supports D1 D2 [ 0.119453] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.119457] pci 0000:03:00.0: PME# disabled [ 0.121009] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.121012] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.121015] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.121018] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.121081] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.121085] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.121089] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.121093] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref] [ 0.121095] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.121097] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.121100] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.121102] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.121104] pci 0000:00:14.4: bridge window [mem 0xafff0000-0xffffffff] (subtractive decode) [ 0.121118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.121350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.121418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.121457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.121490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.135555] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135605] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135654] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135703] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135752] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135802] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135851] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135900] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135923] HEST: Table is not found! [ 0.136088] SCSI subsystem initialized [ 0.136097] libata version 3.00 loaded. [ 0.136097] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.136097] vgaarb: loaded [ 0.136101] usbcore: registered new interface driver usbfs [ 0.136113] usbcore: registered new interface driver hub [ 0.136121] usbcore: registered new device driver usb [ 0.136121] PCI: Using ACPI for IRQ routing [ 0.136121] PCI: pci_cache_line_size set to 64 bytes [ 0.136121] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xfb000000-0xfcffffff] [ 0.136121] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 0.136121] reserve RAM buffer: 00000000affe0000 - 00000000afffffff [ 0.136213] NetLabel: Initializing [ 0.136214] NetLabel: domain hash size = 128 [ 0.136215] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.136225] NetLabel: unlabeled traffic allowed by default [ 0.136235] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.136239] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.138023] Switching to clocksource hpet [ 0.139053] AppArmor: AppArmor Filesystem Enabled [ 0.139059] pnp: PnP ACPI init [ 0.139073] ACPI: bus type pnp registered [ 0.139181] pnp 00:00: [bus 00-ff] [ 0.139183] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.139185] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.139186] pnp 00:00: [io 0x0d00-0xffff window] [ 0.139188] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.139190] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.139192] pnp 00:00: [mem 0xafff0000-0xffffffff window] [ 0.139241] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.139409] pnp 00:01: [io 0x4100-0x411f] [ 0.139411] pnp 00:01: [io 0x0228-0x022f] [ 0.139412] pnp 00:01: [io 0x040b] [ 0.139414] pnp 00:01: [io 0x04d6] [ 0.139415] pnp 00:01: [io 0x0c00-0x0c01] [ 0.139417] pnp 00:01: [io 0x0c14] [ 0.139419] pnp 00:01: [io 0x0c50-0x0c52] [ 0.139420] pnp 00:01: [io 0x0c6c-0x0c6d] [ 0.139422] pnp 00:01: [io 0x0c6f] [ 0.139424] pnp 00:01: [io 0x0cd0-0x0cd1] [ 0.139426] pnp 00:01: [io 0x0cd2-0x0cd3] [ 0.139428] pnp 00:01: [io 0x0cd4-0x0cdf] [ 0.139429] pnp 00:01: [io 0x4000-0x40fe] [ 0.139431] pnp 00:01: [io 0x4210-0x4217] [ 0.139432] pnp 00:01: [io 0x0b10-0x0b1f] [ 0.139434] pnp 00:01: [mem 0x00000000-0x00000fff window] [ 0.139436] pnp 00:01: [mem 0xfee00400-0xfee00fff window] [ 0.139441] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.139465] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.139469] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.139476] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.139503] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.139620] pnp 00:02: [dma 4] [ 0.139621] pnp 00:02: [io 0x0000-0x000f] [ 0.139623] pnp 00:02: [io 0x0080-0x0090] [ 0.139624] pnp 00:02: [io 0x0094-0x009f] [ 0.139626] pnp 00:02: [io 0x00c0-0x00df] [ 0.139652] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.139704] pnp 00:03: [irq 0 disabled] [ 0.139716] pnp 00:03: [irq 8] [ 0.139718] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.139747] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.139776] pnp 00:04: [io 0x0070-0x0073] [ 0.139804] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.139812] pnp 00:05: [io 0x0061] [ 0.139838] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.139846] pnp 00:06: [io 0x00f0-0x00ff] [ 0.139854] pnp 00:06: [irq 13] [ 0.139885] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.139942] pnp 00:07: [io 0x0010-0x001f] [ 0.139944] pnp 00:07: [io 0x0022-0x003f] [ 0.139946] pnp 00:07: [io 0x0044-0x005f] [ 0.139947] pnp 00:07: [io 0x0062-0x0063] [ 0.139949] pnp 00:07: [io 0x0065-0x006f] [ 0.139950] pnp 00:07: [io 0x0074-0x007f] [ 0.139952] pnp 00:07: [io 0x0091-0x0093] [ 0.139953] pnp 00:07: [io 0x00a2-0x00bf] [ 0.139955] pnp 00:07: [io 0x00e0-0x00ef] [ 0.139956] pnp 00:07: [io 0x04d0-0x04d1] [ 0.139958] pnp 00:07: [io 0x0220-0x0225] [ 0.140026] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.140209] pnp 00:08: [io 0x03f0-0x03f5] [ 0.140210] pnp 00:08: [io 0x03f7] [ 0.140218] pnp 00:08: [irq 6] [ 0.140220] pnp 00:08: [dma 2] [ 0.140262] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.140513] pnp 00:09: [io 0x03f8-0x03ff] [ 0.140521] pnp 00:09: [irq 4] [ 0.140571] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.140846] pnp 00:0a: [io 0x0378-0x037f] [ 0.140853] pnp 00:0a: [irq 7] [ 0.140899] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.141127] pnp 00:0b: [mem 0x000f0000-0x000fffff] [ 0.141130] pnp 00:0b: [mem 0x00000000-0x001fffff] [ 0.141132] pnp 00:0b: [mem 0xfed00000-0xfed000ff] [ 0.141134] pnp 00:0b: [mem 0xaffe0000-0xafffffff] [ 0.141136] pnp 00:0b: [mem 0xffff0000-0xffffffff] [ 0.141137] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.141139] pnp 00:0b: [mem 0x00100000-0xaffdffff] [ 0.141141] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.141142] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.141144] pnp 00:0b: [mem 0xfff80000-0xfffeffff] [ 0.141148] pnp 00:0b: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.141151] pnp 00:0b: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.141154] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.141156] pnp 00:0b: disabling [mem 0x00100000-0xaffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.141209] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.141217] pnp: PnP ACPI: found 12 devices [ 0.141218] ACPI: ACPI bus type pnp unregistered [ 0.141226] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.141229] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.141231] system 00:01: [io 0x040b] has been reserved [ 0.141233] system 00:01: [io 0x04d6] has been reserved [ 0.141235] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.141238] system 00:01: [io 0x0c14] has been reserved [ 0.141240] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.141242] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.141244] system 00:01: [io 0x0c6f] has been reserved [ 0.141246] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.141249] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.141251] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.141253] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.141256] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.141258] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.141261] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.141266] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.141268] system 00:07: [io 0x0220-0x0225] has been reserved [ 0.141273] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.141276] system 00:0b: [mem 0xaffe0000-0xafffffff] could not be reserved [ 0.141278] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.141281] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.141284] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.141286] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.177583] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0000000-0xc007ffff pref] [ 0.177586] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.177588] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.177591] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.177594] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xcfffffff 64bit pref] [ 0.177598] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref] [ 0.177600] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.177602] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.177605] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.177608] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.177612] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.177613] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.177615] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.177618] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.177621] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.177624] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.177627] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.177632] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.177636] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref] [ 0.177656] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.177659] pci 0000:00:02.0: setting latency timer to 64 [ 0.177662] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.177665] pci 0000:00:06.0: setting latency timer to 64 [ 0.177674] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.177676] pci 0000:00:07.0: setting latency timer to 64 [ 0.177683] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.177685] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.177686] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.177688] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.177690] pci_bus 0000:00: resource 8 [mem 0xafff0000-0xffffffff] [ 0.177692] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.177694] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.177696] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xcfffffff 64bit pref] [ 0.177698] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.177699] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.177701] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.177703] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.177705] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.177707] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.177709] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.177711] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.177712] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref] [ 0.177714] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.177716] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.177718] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.177720] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 0.177721] pci_bus 0000:04: resource 8 [mem 0xafff0000-0xffffffff] [ 0.177777] NET: Registered protocol family 2 [ 0.177840] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.178085] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.178511] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.178740] TCP: Hash tables configured (established 131072 bind 65536) [ 0.178742] TCP reno registered [ 0.178745] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.178753] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.178859] NET: Registered protocol family 1 [ 0.264056] pci 0000:01:00.0: Boot video device [ 0.264073] PCI: CLS 32 bytes, default 64 [ 0.264113] Unpacking initramfs... [ 0.439773] Freeing initrd memory: 10632k freed [ 0.444972] audit: initializing netlink socket (disabled) [ 0.444983] type=2000 audit(1350128346.443:1): initialized [ 0.453432] highmem bounce pool size: 64 pages [ 0.453436] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.453689] VFS: Disk quotas dquot_6.5.2 [ 0.453720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.453874] msgmni has been set to 400 [ 0.454121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.454153] io scheduler noop registered [ 0.454155] io scheduler deadline registered [ 0.454178] io scheduler cfq registered (default) [ 0.454902] vesafb: framebuffer at 0xcf000000, mapped to 0xf7a80000, using 5120k, total 14336k [ 0.454904] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 0.454905] vesafb: protected mode interface info at c000:c600 [ 0.454907] vesafb: pmi: set display start = c00cc663, set palette = c00cc6be [ 0.454908] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.454917] vesafb: scrolling: redraw [ 0.454919] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.455290] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.455292] bootsplash: silentjpeg size 245922 bytes [ 0.477208] bootsplash: ...found (1280x1024, 255920 bytes, v3). [ 0.534335] Console: switching to colour frame buffer device 156x60 [ 0.590753] fb0: VESA VGA frame buffer device [ 0.590796] ERST: Table is not found! [ 0.591056] Non-volatile memory driver v1.3 [ 0.591058] Linux agpgart interface v0.103 [ 0.592317] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.612974] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.748738] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.764148] ahci 0000:00:12.0: version 3.0 [ 0.764167] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.764191] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 0.764334] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.764337] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc [ 0.765016] scsi0 : ahci [ 0.765116] scsi1 : ahci [ 0.765181] scsi2 : ahci [ 0.765246] scsi3 : ahci [ 0.765358] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.765361] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.765364] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.765367] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.766033] ahci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.777035] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.777037] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.777042] ahci 0000:02:00.0: setting latency timer to 64 [ 0.777401] scsi4 : ahci [ 0.777461] scsi5 : ahci [ 0.777498] ata5: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe100 irq 18 [ 0.777501] ata6: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe180 irq 18 [ 0.777574] Fixed MDIO Bus: probed [ 0.777578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.778033] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.778042] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 0.778062] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 0.786033] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 0.786046] ehci_hcd 0000:00:13.5: debug port 1 [ 0.786071] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 0.792014] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 0.792030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.792032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.792034] usb usb1: Product: EHCI Host Controller [ 0.792035] usb usb1: Manufacturer: Linux 2.6.37.6-0.20-desktop ehci_hcd [ 0.792037] usb usb1: SerialNumber: 0000:00:13.5 [ 0.792128] hub 1-0:1.0: USB hub found [ 0.792131] hub 1-0:1.0: 10 ports detected [ 0.792227] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.792286] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.792294] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.792300] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.798037] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 0.853047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.853049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.853051] usb usb2: Product: OHCI Host Controller [ 0.853052] usb usb2: Manufacturer: Linux 2.6.37.6-0.20-desktop ohci_hcd [ 0.853054] usb usb2: SerialNumber: 0000:00:13.0 [ 0.853122] hub 2-0:1.0: USB hub found [ 0.853128] hub 2-0:1.0: 2 ports detected [ 0.853232] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.853240] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.853246] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.861035] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 0.916042] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.916044] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.916045] usb usb3: Product: OHCI Host Controller [ 0.916047] usb usb3: Manufacturer: Linux 2.6.37.6-0.20-desktop ohci_hcd [ 0.916048] usb usb3: SerialNumber: 0000:00:13.1 [ 0.916113] hub 3-0:1.0: USB hub found [ 0.916119] hub 3-0:1.0: 2 ports detected [ 0.916214] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.916223] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 0.916228] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 0.924021] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 0.979034] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.979036] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.979038] usb usb4: Product: OHCI Host Controller [ 0.979039] usb usb4: Manufacturer: Linux 2.6.37.6-0.20-desktop ohci_hcd [ 0.979041] usb usb4: SerialNumber: 0000:00:13.2 [ 0.979109] hub 4-0:1.0: USB hub found [ 0.979114] hub 4-0:1.0: 2 ports detected [ 0.979207] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.979215] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 0.979221] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 0.987022] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 1.042040] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.042041] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.042043] usb usb5: Product: OHCI Host Controller [ 1.042045] usb usb5: Manufacturer: Linux 2.6.37.6-0.20-desktop ohci_hcd [ 1.042046] usb usb5: SerialNumber: 0000:00:13.3 [ 1.042115] hub 5-0:1.0: USB hub found [ 1.042120] hub 5-0:1.0: 2 ports detected [ 1.042214] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.042223] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.042229] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.051021] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 1.070061] ata4: SATA link down (SStatus 0 SControl 300) [ 1.070097] ata2: SATA link down (SStatus 0 SControl 300) [ 1.070130] ata3: SATA link down (SStatus 0 SControl 300) [ 1.082034] ata5: SATA link down (SStatus 0 SControl 300) [ 1.082068] ata6: SATA link down (SStatus 0 SControl 300) [ 1.106045] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.106047] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.106048] usb usb6: Product: OHCI Host Controller [ 1.106050] usb usb6: Manufacturer: Linux 2.6.37.6-0.20-desktop ohci_hcd [ 1.106052] usb usb6: SerialNumber: 0000:00:13.4 [ 1.106116] hub 6-0:1.0: USB hub found [ 1.106121] hub 6-0:1.0: 2 ports detected [ 1.106190] uhci_hcd: USB Universal Host Controller Interface driver [ 1.106218] Initializing USB Mass Storage driver... [ 1.106244] usbcore: registered new interface driver usb-storage [ 1.106245] USB Mass Storage support registered. [ 1.106254] usbcore: registered new interface driver ums-alauda [ 1.106263] usbcore: registered new interface driver ums-cypress [ 1.106272] usbcore: registered new interface driver ums-datafab [ 1.106281] usbcore: registered new interface driver ums-freecom [ 1.106290] usbcore: registered new interface driver ums-isd200 [ 1.106298] usbcore: registered new interface driver ums-jumpshot [ 1.106307] usbcore: registered new interface driver ums-karma [ 1.106316] usbcore: registered new interface driver ums-onetouch [ 1.106325] usbcore: registered new interface driver ums-sddr09 [ 1.106335] usbcore: registered new interface driver ums-sddr55 [ 1.106344] usbcore: registered new interface driver ums-usbat [ 1.106380] PNP: No PS/2 controller found. Probing ports directly. [ 1.106785] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.106790] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.106859] mice: PS/2 mouse device common for all mice [ 1.106935] rtc_cmos 00:04: RTC can wake from S4 [ 1.109052] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.109087] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.109095] cpuidle: using governor ladder [ 1.109096] cpuidle: using governor menu [ 1.109348] usbcore: registered new interface driver usbhid [ 1.109350] usbhid: USB HID core driver [ 1.109528] TCP cubic registered [ 1.109596] NET: Registered protocol family 10 [ 1.109859] lo: Disabled Privacy Extensions [ 1.110017] lib80211: common routines for IEEE802.11 drivers [ 1.110018] lib80211_crypt: registered algorithm 'NULL' [ 1.110020] Registering the dns_resolver key type [ 1.110068] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5) [ 1.110076] Using IPI No-Shortcut mode [ 1.110147] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST3250318AS_6VY3CK0B-part2 [ 1.225022] ata1: softreset failed (device not ready) [ 1.225028] ata1: applying SB600 PMP SRST workaround and retrying [ 1.380031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.381035] ata1.00: ATA-8: ST3250318AS, CC37, max UDMA/133 [ 1.381037] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.381040] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.382215] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.382217] ata1.00: configured for UDMA/133 [ 1.382347] scsi 0:0:0:0: Direct-Access ATA ST3250318AS CC37 PQ: 0 ANSI: 5 [ 1.382462] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.382557] sd 0:0:0:0: [sda] Write Protect is off [ 1.382559] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.382592] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.443209] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 1.443530] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.443538] PM: Hibernation image not present or could not be loaded. [ 1.443547] registered taskstats version 1 [ 1.443767] Magic number: 0:300:681 [ 1.443842] rtc_cmos 00:04: setting system clock to 2012-10-13 11:39:07 UTC (1350128347) [ 1.443910] Freeing unused kernel memory: 452k freed [ 1.444107] Write protecting the kernel text: 4708k [ 1.444167] Write protecting the kernel read-only data: 3188k [ 1.489991] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.490320] scsi6 : pata_atiixp [ 1.490379] scsi7 : pata_atiixp [ 1.491065] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 1.491067] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 1.535028] usb 6-1: new full speed USB device using ohci_hcd and address 2 [ 1.645499] ata7.00: ATAPI: TSSTcorpCD/DVDW TS-H552B, TS12, max UDMA/33 [ 1.651434] ata7.00: configured for UDMA/33 [ 1.652283] scsi 6:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552B TS12 PQ: 0 ANSI: 5 [ 1.655408] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001) [ 1.655416] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.655446] pata_jmicron 0000:02:00.1: setting latency timer to 64 [ 1.655710] scsi8 : pata_jmicron [ 1.655770] scsi9 : pata_jmicron [ 1.655802] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 19 [ 1.655804] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 19 [ 1.688066] usb 6-1: New USB device found, idVendor=19ff, idProduct=0231 [ 1.688069] usb 6-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.688071] usb 6-1: Product: Dynex wireless combo [ 1.698060] input: Dynex wireless combo as /devices/pci0000:00/0000:00:13.4/usb6/6-1/6-1:1.0/input/input0 [ 1.698111] generic-usb 0003:19FF:0231.0001: input,hidraw0: USB HID v1.11 Keyboard [Dynex wireless combo] on usb-0000:00:13.4-1/input0 [ 1.702705] input: Dynex wireless combo as /devices/pci0000:00/0000:00:13.4/usb6/6-1/6-1:1.1/input/input1 [ 1.702771] generic-usb 0003:19FF:0231.0002: input,hidraw1: USB HID v1.11 Mouse [Dynex wireless combo] on usb-0000:00:13.4-1/input1 [ 1.974663] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20101013/nspredef-1059) [ 1.974670] ACPI: Expecting a [Reference] package element, found type 0 [ 1.974678] ACPI: Invalid passive threshold [ 1.974818] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.974822] ACPI: Thermal Zone [THRM] (36 C) [ 1.980160] ACPI: acpi_idle registered with cpuidle [ 1.981891] ACPI: Fan [FAN] (on) [ 1.987547] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 1.991689] udev[145]: starting version 166 [ 3.119667] kjournald starting. Commit interval 15 seconds [ 3.119899] EXT3-fs (sda5): using internal journal [ 3.119902] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 4.759093] preloadtrace: systemtap: 1.4/0.149, base: f8197000, memory: 30data/39text/13ctx/13net/282alloc kb, probes: 34 [ 5.498673] udev[417]: starting version 166 [ 5.610941] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 5.610975] ACPI: Power Button [PWRB] [ 5.611045] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 5.611067] ACPI: Power Button [PWRF] [ 5.928026] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 5.964038] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 6.001275] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 6.009937] IT8718 SuperIO detected. [ 6.010533] parport_pc 00:0a: reported by Plug and Play ACPI [ 6.010588] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 6.020835] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 6.020838] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.020922] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 6.029250] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.029343] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 6.034894] FDC 0 is a post-1991 82077 [ 6.099368] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.140703] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.155733] ppdev: user-space parallel port driver [ 6.199506] sky2: driver version 1.28 [ 6.200042] sky2 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6.200051] sky2 0000:03:00.0: setting latency timer to 64 [ 6.200080] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 5 [ 6.200163] sky2 0000:03:00.0: irq 40 for MSI/MSI-X [ 6.200551] sky2 0000:03:00.0: eth0: addr 00:e0:4d:75:bc:d3 [ 6.894260] nvidia: module license 'NVIDIA' taints kernel. [ 6.894264] Disabling lock debugging due to kernel taint [ 7.120908] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.120912] ALSA hda_intel.c:2398: Using LPIB position fix [ 7.126107] ALSA hda_intel.c:1488: Enable sync_write for stable communication [ 7.217600] hda_codec: ALC888: BIOS auto-probing. [ 7.217604] ALSA patch_realtek.c:1522: SKU: Nid=0x0 sku_cfg=0x0000e601 [ 7.217606] ALSA patch_realtek.c:1524: SKU: port_connectivity=0x0 [ 7.217608] ALSA patch_realtek.c:1525: SKU: enable_pcbeep=0x1 [ 7.217610] ALSA patch_realtek.c:1526: SKU: check_sum=0x00000000 [ 7.217612] ALSA patch_realtek.c:1527: SKU: customization=0x00000000 [ 7.217614] ALSA patch_realtek.c:1528: SKU: external_amp=0x0 [ 7.217615] ALSA patch_realtek.c:1529: SKU: platform_type=0x0 [ 7.217617] ALSA patch_realtek.c:1530: SKU: swap=0x0 [ 7.217619] ALSA patch_realtek.c:1531: SKU: override=0x1 [ 7.217622] ALSA hda_codec.c:4633: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) [ 7.217625] ALSA hda_codec.c:4637: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.217627] ALSA hda_codec.c:4641: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 7.217629] ALSA hda_codec.c:4642: mono: mono_out=0x0 [ 7.217631] ALSA hda_codec.c:4645: dig-out=0x1e/0x0 [ 7.217633] ALSA hda_codec.c:4646: inputs: [ 7.217634] ALSA hda_codec.c:4652: [ 7.217636] ALSA hda_codec.c:4654: dig-in=0x1f [ 7.219187] ALSA patch_realtek.c:1595: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888 [ 7.224046] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.224055] nvidia 0000:01:00.0: setting latency timer to 64 [ 7.224059] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 7.224506] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.43 Sun Aug 19 20:20:21 PDT 2012 [ 7.227237] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 7.227395] HDA Intel 0000:01:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.227398] hda_intel: Disabling MSI [ 7.227414] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 7.234978] ALSA hda_intel.c:1450: Enable delay in RIRB handling [ 8.071660] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k [ 8.743145] device-mapper: uevent: version 1.0.3 [ 8.743262] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 9.498449] kjournald starting. Commit interval 15 seconds [ 9.498745] EXT3-fs (sda7): using internal journal [ 9.498749] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 9.524932] kjournald starting. Commit interval 15 seconds [ 9.525465] EXT3-fs (sda1): using internal journal [ 9.525467] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 9.537551] kjournald starting. Commit interval 15 seconds [ 9.537756] EXT3-fs (sda6): using internal journal [ 9.537758] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 11.616370] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ (2 cpu cores) (version 2.20.00) [ 11.616418] powernow-k8: 0 : fid 0x18 (3200 MHz), vid 0x6 [ 11.616419] powernow-k8: 1 : fid 0x16 (3000 MHz), vid 0x8 [ 11.616421] powernow-k8: 2 : fid 0x14 (2800 MHz), vid 0xa [ 11.616422] powernow-k8: 3 : fid 0x12 (2600 MHz), vid 0xc [ 11.616424] powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0xe [ 11.616425] powernow-k8: 5 : fid 0xe (2200 MHz), vid 0x10 [ 11.616426] powernow-k8: 6 : fid 0xc (2000 MHz), vid 0x10 [ 11.616427] powernow-k8: 7 : fid 0xa (1800 MHz), vid 0x10 [ 11.616429] powernow-k8: 8 : fid 0x2 (1000 MHz), vid 0x12 [ 12.004021] Clocksource tsc unstable (delta = -113198785 ns) [ 14.145924] sky2 0000:03:00.0: eth0: enabling interface [ 14.146115] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.723650] NVRM: GPU at 0000:01:00: GPU-530fdfac-1f26-a973-7c44-dd5dd2360f4f [ 18.723655] NVRM: Your system is not currently configured to drive a VGA console [ 18.723658] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 18.723660] NVRM: requires the use of a text-mode VGA console. Use of other console [ 18.723662] NVRM: drivers including, but not limited to, vesafb, may result in [ 18.723663] NVRM: corruption and stability problems, and is not supported. [ 36.755668] start_kdeinit (2217): /proc/2217/oom_adj is deprecated, please use /proc/2217/oom_score_adj instead. [ 42.740585] bootsplash: status on console 0 changed to on [ 84.998747] fuse init (API version 7.15) [-- Attachment #3: dmesg.nouveau-hdmi --] [-- Type: text/plain, Size: 56327 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37.6-0.20-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-12-19 23:39:38 +0100 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000affe0000 (usable) [ 0.000000] BIOS-e820: 00000000affe0000 - 00000000affe3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000affe3000 - 00000000afff0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: BIOSTAR Group A78XA-A2T/TA770 A2+, BIOS 6.00 PG 06/12/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x150000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back [ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back [ 0.000000] 3 base 0100000000 mask FFC0000000 write-back [ 0.000000] 4 base 0140000000 mask FFF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000150000000 aka 5376M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00f3f00] f3f00 [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00371fe000 page 4k [ 0.000000] kernel direct mapping tables up to 371fe000 @ ff6000-1000000 [ 0.000000] RAMDISK: 3758e000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 3679c000 - 371fdffa [ 0.000000] Move RAMDISK from 000000003758e000 - 0000000037fefff9 to 3679c000 - 371fdff9 [ 0.000000] ACPI: RSDP 000f7fb0 00024 (v02 RX780 ) [ 0.000000] ACPI: RSDT affe3000 00038 (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP affe3080 00074 (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT affe3100 05A71 (v01 RX780 AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS affe0000 00040 [ 0.000000] ACPI: SSDT affe8c40 00350 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET affe8fc0 00038 (v01 RX780 AWRDACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG affe9000 0003C (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC affe8b80 00084 (v01 RX780 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] could not find any ACPI SRAT memory areas. [ 0.000000] failed to get NUMA memory information from SRAT table [ 0.000000] NUMA - single node, flat memory mode [ 0.000000] Node: 0, start_pfn: 0, end_pfn: 150000 [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 80000 84000 88000 8c000 90000 94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 b4000 b8000 bc000 c0000 c4000 c8000 cc000 d0000 d4000 d8000 dc000 e0000 e4000 e8000 ec000 f0000 f4000 f8000 fc000 100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 130000 134000 138000 13c000 140000 144000 148000 14c000 [ 0.000000] node 0 pfn: [0 - 150000] [ 0.000000] Reserving 11264 pages of KVA for lmem_map of node 0 at 14d400 [ 0.000000] Reserving total of 2c00 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 33a00 max_low_pfn ~ 371fe [ 0.000000] max_pfn = 150000 [ 0.000000] 4494MB HIGHMEM available. [ 0.000000] 881MB LOWMEM available. [ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe [ 0.000000] Low memory ends at vaddr f71fe000 [ 0.000000] node 0 will remap to vaddr f3a00000 - f6600000 [ 0.000000] allocate_pgdat: node 0 NODE_DATA f3a00000 [ 0.000000] remap_numa_kva: node 0 [ 0.000000] remap_numa_kva: f3a00000 to pfn 0014d400 [ 0.000000] remap_numa_kva: f3c00000 to pfn 0014d600 [ 0.000000] remap_numa_kva: f3e00000 to pfn 0014d800 [ 0.000000] remap_numa_kva: f4000000 to pfn 0014da00 [ 0.000000] remap_numa_kva: f4200000 to pfn 0014dc00 [ 0.000000] remap_numa_kva: f4400000 to pfn 0014de00 [ 0.000000] remap_numa_kva: f4600000 to pfn 0014e000 [ 0.000000] remap_numa_kva: f4800000 to pfn 0014e200 [ 0.000000] remap_numa_kva: f4a00000 to pfn 0014e400 [ 0.000000] remap_numa_kva: f4c00000 to pfn 0014e600 [ 0.000000] remap_numa_kva: f4e00000 to pfn 0014e800 [ 0.000000] remap_numa_kva: f5000000 to pfn 0014ea00 [ 0.000000] remap_numa_kva: f5200000 to pfn 0014ec00 [ 0.000000] remap_numa_kva: f5400000 to pfn 0014ee00 [ 0.000000] remap_numa_kva: f5600000 to pfn 0014f000 [ 0.000000] remap_numa_kva: f5800000 to pfn 0014f200 [ 0.000000] remap_numa_kva: f5a00000 to pfn 0014f400 [ 0.000000] remap_numa_kva: f5c00000 to pfn 0014f600 [ 0.000000] remap_numa_kva: f5e00000 to pfn 0014f800 [ 0.000000] remap_numa_kva: f6000000 to pfn 0014fa00 [ 0.000000] remap_numa_kva: f6200000 to pfn 0014fc00 [ 0.000000] remap_numa_kva: f6400000 to pfn 0014fe00 [ 0.000000] High memory starts at vaddr f71fe000 [ 0.000000] mapped low ram: 0 - 371fe000 [ 0.000000] low ram: 0 - 371fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000371fe [ 0.000000] HighMem 0x000371fe -> 0x00150000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000affe0 [ 0.000000] 0: 0x00100000 -> 0x00150000 [ 0.000000] On node 0 totalpages: 1048431 [ 0.000000] free_area_init_node: node 0, pgdat f3a00000, node_mem_map f3a02200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1732 pages used for memmap [ 0.000000] Normal zone: 219962 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8989 pages used for memmap [ 0.000000] HighMem zone: 813765 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:30000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f3800000 s28160 r0 d20992 u524288 [ 0.000000] pcpu-alloc: s28160 r0 d20992 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037678 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: root=/dev/sda5 resume=/dev/disk/by-id/ata-ST3250318AS_6VY3CK0B-part2 splash=silent quiet vga=0x31a nomodeset [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 27524800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000371fe:00150000) [ 0.000000] Memory: 4055300k/5505024k available (4704k kernel code, 93368k reserved, 3493k data, 452k init, 3245960k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB) [ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB) [ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB) [ 0.000000] .init : 0xc0a02000 - 0xc0a73000 ( 452 kB) [ 0.000000] .data : 0xc06980ad - 0xc0a01708 (3493 kB) [ 0.000000] .text : 0xc0200000 - 0xc06980ad (4704 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:8448 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f180c000 soft=f180e000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using HPET reference calibration [ 0.000000] Detected 3200.220 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.44 BogoMIPS (lpj=3200220) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004059] Security Framework initialized [ 0.004068] AppArmor: AppArmor initialized [ 0.004108] Mount-cache hash table entries: 512 [ 0.004189] Initializing cgroup subsys ns [ 0.004191] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004193] Initializing cgroup subsys cpuacct [ 0.004195] Initializing cgroup subsys memory [ 0.004203] Initializing cgroup subsys devices [ 0.004205] Initializing cgroup subsys freezer [ 0.004206] Initializing cgroup subsys net_cls [ 0.004207] Initializing cgroup subsys blkio [ 0.004230] CPU: Physical Processor ID: 0 [ 0.004231] CPU: Processor Core ID: 0 [ 0.004232] mce: CPU supports 5 MCE banks [ 0.004239] using C1E aware idle routine [ 0.004243] Performance Events: AMD PMU driver. [ 0.004246] ... version: 0 [ 0.004247] ... bit width: 48 [ 0.004248] ... generic registers: 4 [ 0.004249] ... value mask: 0000ffffffffffff [ 0.004251] ... max period: 00007fffffffffff [ 0.004252] ... fixed-purpose events: 0 [ 0.004253] ... event mask: 000000000000000f [ 0.004479] ACPI: Core revision 20101013 [ 0.012071] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.012372] Mapping cpu 0 to node 0 [ 0.012591] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023101] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03 [ 0.026011] NMI watchdog enabled, takes one hw-pmu counter. [ 0.030012] CPU 1 irqstacks, hard=f18a0000 soft=f18a2000 [ 0.030016] Booting Node 0, Processors #1 [ 0.004999] Initializing CPU#1 [ 0.004999] Mapping cpu 1 to node 0 [ 0.101085] NMI watchdog enabled, takes one hw-pmu counter. [ 0.102003] Brought up 2 CPUs [ 0.102005] Total of 2 processors activated (12800.52 BogoMIPS). [ 0.102236] devtmpfs: initialized [ 0.102236] regulator: core version 0.5 [ 0.102236] regulator: dummy: [ 0.102236] Time: 16:11:53 Date: 10/13/12 [ 0.102236] NET: Registered protocol family 16 [ 0.102323] node 0 link 0: io port [b000, ffff] [ 0.102326] TOM: 00000000b0000000 aka 2816M [ 0.102328] node 0 link 0: mmio [a0000, bffff] [ 0.102330] node 0 link 0: mmio [b0000000, dfffffff] [ 0.102332] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.102334] node 0 link 0: mmio [e0000000, e04fffff] [ 0.102336] TOM2: 0000000150000000 aka 5376M [ 0.102337] bus: [00, 04] on node 0 link 0 [ 0.102339] bus: 00 index 0 [io 0x0000-0xffff] [ 0.102341] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.102342] bus: 00 index 2 [mem 0xb0000000-0xefffffff] [ 0.102344] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.102345] bus: 00 index 4 [mem 0x150000000-0xfcffffffff] [ 0.102409] ACPI: bus type pci registered [ 0.102469] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.102472] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.102473] PCI: Using MMCONFIG for extended config space [ 0.102474] PCI: Using configuration type 1 for base access [ 0.103611] bio: create slab <bio-0> at 0 [ 0.104597] ACPI: EC: Look up EC in DSDT [ 0.105438] ACPI: Executed 1 blocks of module-level executable AML code [ 0.108566] ACPI: Interpreter enabled [ 0.108569] ACPI: (supports S0 S1 S4 S5) [ 0.108587] ACPI: Using IOAPIC for interrupt routing [ 0.112090] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.112156] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.112174] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.115372] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.115440] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.115844] ACPI: No dock devices found. [ 0.115847] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.115909] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.116054] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.116056] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.116058] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.116060] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.116062] pci_root PNP0A03:00: host bridge window [mem 0xafff0000-0xffffffff] [ 0.116076] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600 [ 0.116089] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.116118] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604 [ 0.116144] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.116147] pci 0000:00:02.0: PME# disabled [ 0.116164] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604 [ 0.116189] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.116191] pci 0000:00:06.0: PME# disabled [ 0.116204] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604 [ 0.116229] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.116231] pci 0000:00:07.0: PME# disabled [ 0.116261] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.116279] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07] [ 0.116289] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03] [ 0.116299] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07] [ 0.116309] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03] [ 0.116319] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f] [ 0.116329] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.116350] pci 0000:00:12.0: set SATA to AHCI mode [ 0.116378] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.116392] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.116457] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.116471] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.116536] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.116550] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.116615] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.116629] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.116694] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.116708] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.116779] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.116799] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.116871] pci 0000:00:13.5: supports D1 D2 [ 0.116873] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.116877] pci 0000:00:13.5: PME# disabled [ 0.116898] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.116920] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.117003] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.117017] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.117026] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.117036] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.117046] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.117056] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f] [ 0.117092] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.117114] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.117174] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.117178] pci 0000:00:14.2: PME# disabled [ 0.117191] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.117266] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.117311] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.117323] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.117334] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.117345] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.117396] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300 [ 0.117406] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.117417] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.117428] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.117436] pci 0000:01:00.0: reg 24: [io 0xcf00-0xcf7f] [ 0.117443] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.117488] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403 [ 0.117498] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff] [ 0.119012] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.119015] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.119018] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.119021] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xcfffffff 64bit pref] [ 0.119058] pci 0000:02:00.0: [197b:2363] type 0 class 0x000104 [ 0.119128] pci 0000:02:00.0: reg 24: [mem 0xfdffe000-0xfdffffff] [ 0.119139] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.119164] pci 0000:02:00.0: PME# supported from D3hot [ 0.119168] pci 0000:02:00.0: PME# disabled [ 0.119191] pci 0000:02:00.1: [197b:2363] type 0 class 0x000101 [ 0.119210] pci 0000:02:00.1: reg 10: [io 0xef00-0xef07] [ 0.119221] pci 0000:02:00.1: reg 14: [io 0xee00-0xee03] [ 0.119232] pci 0000:02:00.1: reg 18: [io 0xed00-0xed07] [ 0.119243] pci 0000:02:00.1: reg 1c: [io 0xec00-0xec03] [ 0.119254] pci 0000:02:00.1: reg 20: [io 0xeb00-0xeb0f] [ 0.119309] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.119319] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.119322] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.119324] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.119328] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.119366] pci 0000:03:00.0: [11ab:4364] type 0 class 0x000200 [ 0.119383] pci 0000:03:00.0: reg 10: [mem 0xfddfc000-0xfddfffff 64bit] [ 0.119393] pci 0000:03:00.0: reg 18: [io 0xde00-0xdeff] [ 0.119425] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.119455] pci 0000:03:00.0: supports D1 D2 [ 0.119457] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.119461] pci 0000:03:00.0: PME# disabled [ 0.121009] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.121012] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.121015] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.121018] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.121080] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.121084] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.121088] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.121092] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref] [ 0.121095] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.121097] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.121099] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.121101] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.121103] pci 0000:00:14.4: bridge window [mem 0xafff0000-0xffffffff] (subtractive decode) [ 0.121117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.121349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.121417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.121456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.121489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.135499] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135549] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135598] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135647] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135697] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135746] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135795] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135844] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.135867] HEST: Table is not found! [ 0.136031] SCSI subsystem initialized [ 0.136040] libata version 3.00 loaded. [ 0.136075] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.136078] vgaarb: loaded [ 0.136101] usbcore: registered new interface driver usbfs [ 0.136113] usbcore: registered new interface driver hub [ 0.136121] usbcore: registered new device driver usb [ 0.136121] PCI: Using ACPI for IRQ routing [ 0.136121] PCI: pci_cache_line_size set to 64 bytes [ 0.136121] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xfb000000-0xfcffffff] [ 0.136121] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 0.136121] reserve RAM buffer: 00000000affe0000 - 00000000afffffff [ 0.136212] NetLabel: Initializing [ 0.136213] NetLabel: domain hash size = 128 [ 0.136214] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.136225] NetLabel: unlabeled traffic allowed by default [ 0.136234] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.136238] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.138023] Switching to clocksource hpet [ 0.139053] AppArmor: AppArmor Filesystem Enabled [ 0.139059] pnp: PnP ACPI init [ 0.139073] ACPI: bus type pnp registered [ 0.139180] pnp 00:00: [bus 00-ff] [ 0.139182] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.139184] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.139186] pnp 00:00: [io 0x0d00-0xffff window] [ 0.139188] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.139190] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.139192] pnp 00:00: [mem 0xafff0000-0xffffffff window] [ 0.139241] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.139409] pnp 00:01: [io 0x4100-0x411f] [ 0.139411] pnp 00:01: [io 0x0228-0x022f] [ 0.139412] pnp 00:01: [io 0x040b] [ 0.139414] pnp 00:01: [io 0x04d6] [ 0.139415] pnp 00:01: [io 0x0c00-0x0c01] [ 0.139417] pnp 00:01: [io 0x0c14] [ 0.139418] pnp 00:01: [io 0x0c50-0x0c52] [ 0.139420] pnp 00:01: [io 0x0c6c-0x0c6d] [ 0.139421] pnp 00:01: [io 0x0c6f] [ 0.139424] pnp 00:01: [io 0x0cd0-0x0cd1] [ 0.139426] pnp 00:01: [io 0x0cd2-0x0cd3] [ 0.139427] pnp 00:01: [io 0x0cd4-0x0cdf] [ 0.139429] pnp 00:01: [io 0x4000-0x40fe] [ 0.139430] pnp 00:01: [io 0x4210-0x4217] [ 0.139432] pnp 00:01: [io 0x0b10-0x0b1f] [ 0.139434] pnp 00:01: [mem 0x00000000-0x00000fff window] [ 0.139436] pnp 00:01: [mem 0xfee00400-0xfee00fff window] [ 0.139441] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.139464] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.139469] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.139476] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.139502] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.139619] pnp 00:02: [dma 4] [ 0.139621] pnp 00:02: [io 0x0000-0x000f] [ 0.139622] pnp 00:02: [io 0x0080-0x0090] [ 0.139624] pnp 00:02: [io 0x0094-0x009f] [ 0.139625] pnp 00:02: [io 0x00c0-0x00df] [ 0.139652] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.139703] pnp 00:03: [irq 0 disabled] [ 0.139716] pnp 00:03: [irq 8] [ 0.139718] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.139746] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.139775] pnp 00:04: [io 0x0070-0x0073] [ 0.139803] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.139811] pnp 00:05: [io 0x0061] [ 0.139838] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.139845] pnp 00:06: [io 0x00f0-0x00ff] [ 0.139853] pnp 00:06: [irq 13] [ 0.139885] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.139942] pnp 00:07: [io 0x0010-0x001f] [ 0.139944] pnp 00:07: [io 0x0022-0x003f] [ 0.139945] pnp 00:07: [io 0x0044-0x005f] [ 0.139947] pnp 00:07: [io 0x0062-0x0063] [ 0.139948] pnp 00:07: [io 0x0065-0x006f] [ 0.139950] pnp 00:07: [io 0x0074-0x007f] [ 0.139951] pnp 00:07: [io 0x0091-0x0093] [ 0.139953] pnp 00:07: [io 0x00a2-0x00bf] [ 0.139954] pnp 00:07: [io 0x00e0-0x00ef] [ 0.139956] pnp 00:07: [io 0x04d0-0x04d1] [ 0.139958] pnp 00:07: [io 0x0220-0x0225] [ 0.140026] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.140208] pnp 00:08: [io 0x03f0-0x03f5] [ 0.140210] pnp 00:08: [io 0x03f7] [ 0.140218] pnp 00:08: [irq 6] [ 0.140219] pnp 00:08: [dma 2] [ 0.140262] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.140512] pnp 00:09: [io 0x03f8-0x03ff] [ 0.140520] pnp 00:09: [irq 4] [ 0.140570] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.140843] pnp 00:0a: [io 0x0378-0x037f] [ 0.140851] pnp 00:0a: [irq 7] [ 0.140897] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.141124] pnp 00:0b: [mem 0x000f0000-0x000fffff] [ 0.141127] pnp 00:0b: [mem 0x00000000-0x001fffff] [ 0.141129] pnp 00:0b: [mem 0xfed00000-0xfed000ff] [ 0.141131] pnp 00:0b: [mem 0xaffe0000-0xafffffff] [ 0.141133] pnp 00:0b: [mem 0xffff0000-0xffffffff] [ 0.141134] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.141136] pnp 00:0b: [mem 0x00100000-0xaffdffff] [ 0.141138] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.141140] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.141141] pnp 00:0b: [mem 0xfff80000-0xfffeffff] [ 0.141145] pnp 00:0b: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.141148] pnp 00:0b: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.141151] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.141154] pnp 00:0b: disabling [mem 0x00100000-0xaffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.141206] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.141214] pnp: PnP ACPI: found 12 devices [ 0.141215] ACPI: ACPI bus type pnp unregistered [ 0.141223] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.141226] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.141228] system 00:01: [io 0x040b] has been reserved [ 0.141230] system 00:01: [io 0x04d6] has been reserved [ 0.141232] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.141234] system 00:01: [io 0x0c14] has been reserved [ 0.141236] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.141238] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.141241] system 00:01: [io 0x0c6f] has been reserved [ 0.141243] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.141245] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.141248] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.141250] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.141252] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.141255] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.141257] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.141263] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.141265] system 00:07: [io 0x0220-0x0225] has been reserved [ 0.141270] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.141273] system 00:0b: [mem 0xaffe0000-0xafffffff] could not be reserved [ 0.141275] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.141278] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.141280] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.141283] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.177569] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0000000-0xc007ffff pref] [ 0.177572] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.177574] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.177577] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.177580] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xcfffffff 64bit pref] [ 0.177584] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref] [ 0.177586] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.177588] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.177591] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.177593] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.177597] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.177599] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.177601] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.177604] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.177606] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.177610] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.177612] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.177618] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.177622] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref] [ 0.177641] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.177644] pci 0000:00:02.0: setting latency timer to 64 [ 0.177648] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.177650] pci 0000:00:06.0: setting latency timer to 64 [ 0.177659] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.177661] pci 0000:00:07.0: setting latency timer to 64 [ 0.177668] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.177670] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.177672] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.177673] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.177675] pci_bus 0000:00: resource 8 [mem 0xafff0000-0xffffffff] [ 0.177677] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.177679] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.177681] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xcfffffff 64bit pref] [ 0.177683] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.177684] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.177686] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.177688] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.177690] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.177692] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.177694] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.177696] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.177698] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref] [ 0.177699] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.177701] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.177703] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.177705] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 0.177707] pci_bus 0000:04: resource 8 [mem 0xafff0000-0xffffffff] [ 0.177762] NET: Registered protocol family 2 [ 0.177825] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.178070] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.178496] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.178725] TCP: Hash tables configured (established 131072 bind 65536) [ 0.178727] TCP reno registered [ 0.178730] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.178739] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.178845] NET: Registered protocol family 1 [ 0.264057] pci 0000:01:00.0: Boot video device [ 0.264074] PCI: CLS 32 bytes, default 64 [ 0.264114] Unpacking initramfs... [ 0.439760] Freeing initrd memory: 10632k freed [ 0.444968] audit: initializing netlink socket (disabled) [ 0.444978] type=2000 audit(1350144712.443:1): initialized [ 0.453427] highmem bounce pool size: 64 pages [ 0.453430] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.453683] VFS: Disk quotas dquot_6.5.2 [ 0.453714] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.453868] msgmni has been set to 400 [ 0.454114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.454144] io scheduler noop registered [ 0.454146] io scheduler deadline registered [ 0.454170] io scheduler cfq registered (default) [ 0.454895] vesafb: framebuffer at 0xcf000000, mapped to 0xf7a80000, using 5120k, total 14336k [ 0.454897] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 0.454898] vesafb: protected mode interface info at c000:c600 [ 0.454900] vesafb: pmi: set display start = c00cc663, set palette = c00cc6be [ 0.454901] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.454909] vesafb: scrolling: redraw [ 0.454911] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.455286] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.455289] bootsplash: silentjpeg size 245922 bytes [ 0.477195] bootsplash: ...found (1280x1024, 255920 bytes, v3). [ 0.534343] Console: switching to colour frame buffer device 156x60 [ 0.590767] fb0: VESA VGA frame buffer device [ 0.590810] ERST: Table is not found! [ 0.591070] Non-volatile memory driver v1.3 [ 0.591072] Linux agpgart interface v0.103 [ 0.592328] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.612979] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.748730] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.764147] ahci 0000:00:12.0: version 3.0 [ 0.764167] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.764190] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 0.764321] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.764324] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc [ 0.765014] scsi0 : ahci [ 0.765115] scsi1 : ahci [ 0.765180] scsi2 : ahci [ 0.765247] scsi3 : ahci [ 0.765358] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 [ 0.765361] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.765364] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.765367] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.766023] ahci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.777035] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.777038] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.777042] ahci 0000:02:00.0: setting latency timer to 64 [ 0.777401] scsi4 : ahci [ 0.777461] scsi5 : ahci [ 0.777498] ata5: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe100 irq 18 [ 0.777501] ata6: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe180 irq 18 [ 0.777589] Fixed MDIO Bus: probed [ 0.777593] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.777636] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.777645] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 0.777665] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 0.783031] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 0.783045] ehci_hcd 0000:00:13.5: debug port 1 [ 0.783070] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 0.789014] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 0.789030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.789032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.789034] usb usb1: Product: EHCI Host Controller [ 0.789035] usb usb1: Manufacturer: Linux 2.6.37.6-0.20-desktop ehci_hcd [ 0.789037] usb usb1: SerialNumber: 0000:00:13.5 [ 0.789129] hub 1-0:1.0: USB hub found [ 0.789132] hub 1-0:1.0: 10 ports detected [ 0.789230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.789289] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.789297] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.789303] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.795037] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 0.850048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.850050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.850052] usb usb2: Product: OHCI Host Controller [ 0.850053] usb usb2: Manufacturer: Linux 2.6.37.6-0.20-desktop ohci_hcd [ 0.850055] usb usb2: SerialNumber: 0000:00:13.0 [ 0.850120] hub 2-0:1.0: USB hub found [ 0.850126] hub 2-0:1.0: 2 ports detected [ 0.850229] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.850237] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.850243] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.858034] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 0.913041] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.913043] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.913045] usb usb3: Product: OHCI Host Controller [ 0.913046] usb usb3: Manufacturer: Linux 2.6.37.6-0.20-desktop ohci_hcd [ 0.913048] usb usb3: SerialNumber: 0000:00:13.1 [ 0.913113] hub 3-0:1.0: USB hub found [ 0.913118] hub 3-0:1.0: 2 ports detected [ 0.913214] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.913222] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 0.913228] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 0.921021] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 0.976039] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.976041] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.976043] usb usb4: Product: OHCI Host Controller [ 0.976044] usb usb4: Manufacturer: Linux 2.6.37.6-0.20-desktop ohci_hcd [ 0.976046] usb usb4: SerialNumber: 0000:00:13.2 [ 0.976112] hub 4-0:1.0: USB hub found [ 0.976117] hub 4-0:1.0: 2 ports detected [ 0.976210] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.976218] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 0.976225] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 0.988021] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 1.043040] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.043042] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.043043] usb usb5: Product: OHCI Host Controller [ 1.043045] usb usb5: Manufacturer: Linux 2.6.37.6-0.20-desktop ohci_hcd [ 1.043046] usb usb5: SerialNumber: 0000:00:13.3 [ 1.043115] hub 5-0:1.0: USB hub found [ 1.043121] hub 5-0:1.0: 2 ports detected [ 1.043219] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.043227] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.043232] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.051021] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 1.070040] ata2: SATA link down (SStatus 0 SControl 300) [ 1.070074] ata4: SATA link down (SStatus 0 SControl 300) [ 1.070106] ata3: SATA link down (SStatus 0 SControl 300) [ 1.082033] ata5: SATA link down (SStatus 0 SControl 300) [ 1.082067] ata6: SATA link down (SStatus 0 SControl 300) [ 1.106045] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.106047] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.106049] usb usb6: Product: OHCI Host Controller [ 1.106050] usb usb6: Manufacturer: Linux 2.6.37.6-0.20-desktop ohci_hcd [ 1.106052] usb usb6: SerialNumber: 0000:00:13.4 [ 1.106116] hub 6-0:1.0: USB hub found [ 1.106121] hub 6-0:1.0: 2 ports detected [ 1.106188] uhci_hcd: USB Universal Host Controller Interface driver [ 1.106220] Initializing USB Mass Storage driver... [ 1.106247] usbcore: registered new interface driver usb-storage [ 1.106248] USB Mass Storage support registered. [ 1.106257] usbcore: registered new interface driver ums-alauda [ 1.106267] usbcore: registered new interface driver ums-cypress [ 1.106276] usbcore: registered new interface driver ums-datafab [ 1.106285] usbcore: registered new interface driver ums-freecom [ 1.106294] usbcore: registered new interface driver ums-isd200 [ 1.106303] usbcore: registered new interface driver ums-jumpshot [ 1.106312] usbcore: registered new interface driver ums-karma [ 1.106321] usbcore: registered new interface driver ums-onetouch [ 1.106331] usbcore: registered new interface driver ums-sddr09 [ 1.106340] usbcore: registered new interface driver ums-sddr55 [ 1.106350] usbcore: registered new interface driver ums-usbat [ 1.106385] PNP: No PS/2 controller found. Probing ports directly. [ 1.106802] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.106807] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.106872] mice: PS/2 mouse device common for all mice [ 1.106950] rtc_cmos 00:04: RTC can wake from S4 [ 1.109053] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.109087] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.109096] cpuidle: using governor ladder [ 1.109097] cpuidle: using governor menu [ 1.109354] usbcore: registered new interface driver usbhid [ 1.109355] usbhid: USB HID core driver [ 1.109534] TCP cubic registered [ 1.109602] NET: Registered protocol family 10 [ 1.109862] lo: Disabled Privacy Extensions [ 1.110020] lib80211: common routines for IEEE802.11 drivers [ 1.110022] lib80211_crypt: registered algorithm 'NULL' [ 1.110024] Registering the dns_resolver key type [ 1.110073] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5) [ 1.110081] Using IPI No-Shortcut mode [ 1.110156] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST3250318AS_6VY3CK0B-part2 [ 1.535022] usb 6-1: new full speed USB device using ohci_hcd and address 2 [ 1.643023] ata1: softreset failed (device not ready) [ 1.643029] ata1: applying SB600 PMP SRST workaround and retrying [ 1.688065] usb 6-1: New USB device found, idVendor=19ff, idProduct=0231 [ 1.688067] usb 6-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.688069] usb 6-1: Product: Dynex wireless combo [ 1.698057] input: Dynex wireless combo as /devices/pci0000:00/0000:00:13.4/usb6/6-1/6-1:1.0/input/input0 [ 1.698108] generic-usb 0003:19FF:0231.0001: input,hidraw0: USB HID v1.11 Keyboard [Dynex wireless combo] on usb-0000:00:13.4-1/input0 [ 1.702699] input: Dynex wireless combo as /devices/pci0000:00/0000:00:13.4/usb6/6-1/6-1:1.1/input/input1 [ 1.702763] generic-usb 0003:19FF:0231.0002: input,hidraw1: USB HID v1.11 Mouse [Dynex wireless combo] on usb-0000:00:13.4-1/input1 [ 1.798070] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.799071] ata1.00: ATA-8: ST3250318AS, CC37, max UDMA/133 [ 1.799073] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.799076] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.800251] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.800253] ata1.00: configured for UDMA/133 [ 1.800382] scsi 0:0:0:0: Direct-Access ATA ST3250318AS CC37 PQ: 0 ANSI: 5 [ 1.800502] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.800589] sd 0:0:0:0: [sda] Write Protect is off [ 1.800591] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.800625] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.866456] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 1.866784] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.866792] PM: Hibernation image not present or could not be loaded. [ 1.866802] registered taskstats version 1 [ 1.867040] Magic number: 0:315:186 [ 1.867121] rtc_cmos 00:04: setting system clock to 2012-10-13 16:11:55 UTC (1350144715) [ 1.867189] Freeing unused kernel memory: 452k freed [ 1.867376] Write protecting the kernel text: 4708k [ 1.867434] Write protecting the kernel read-only data: 3188k [ 1.912750] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.913077] scsi6 : pata_atiixp [ 1.913136] scsi7 : pata_atiixp [ 1.913799] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 1.913801] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 2.067491] ata7.00: ATAPI: TSSTcorpCD/DVDW TS-H552B, TS12, max UDMA/33 [ 2.073425] ata7.00: configured for UDMA/33 [ 2.074257] scsi 6:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552B TS12 PQ: 0 ANSI: 5 [ 2.077400] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001) [ 2.077407] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.077438] pata_jmicron 0000:02:00.1: setting latency timer to 64 [ 2.077709] scsi8 : pata_jmicron [ 2.077766] scsi9 : pata_jmicron [ 2.077799] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 19 [ 2.077801] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 19 [ 2.396539] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20101013/nspredef-1059) [ 2.396546] ACPI: Expecting a [Reference] package element, found type 0 [ 2.396553] ACPI: Invalid passive threshold [ 2.396693] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.396697] ACPI: Thermal Zone [THRM] (34 C) [ 2.402041] ACPI: acpi_idle registered with cpuidle [ 2.403768] ACPI: Fan [FAN] (on) [ 2.409433] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 2.413544] udev[145]: starting version 166 [ 3.667793] kjournald starting. Commit interval 15 seconds [ 3.668022] EXT3-fs (sda5): using internal journal [ 3.668025] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 5.307221] preloadtrace: systemtap: 1.4/0.149, base: f8161000, memory: 30data/39text/13ctx/13net/282alloc kb, probes: 34 [ 6.030723] udev[410]: starting version 166 [ 6.254426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 6.254468] ACPI: Power Button [PWRB] [ 6.254527] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.254550] ACPI: Power Button [PWRF] [ 6.293032] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 6.303831] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.326245] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.328932] FDC 0 is a post-1991 82077 [ 6.549211] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.549415] scsi 6:0:0:0: Attached scsi generic sg1 type 5 [ 6.586559] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 6.645429] IT8718 SuperIO detected. [ 6.645880] parport_pc 00:0a: reported by Plug and Play ACPI [ 6.645934] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 6.649276] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 6.656077] sky2: driver version 1.28 [ 6.656146] sky2 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6.656155] sky2 0000:03:00.0: setting latency timer to 64 [ 6.656182] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 5 [ 6.656267] sky2 0000:03:00.0: irq 40 for MSI/MSI-X [ 6.656648] sky2 0000:03:00.0: eth0: addr 00:e0:4d:75:bc:d3 [ 6.750074] [drm] Initialized drm 1.1.0 20060810 [ 6.750864] ppdev: user-space parallel port driver [ 6.910353] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 6.910357] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.910458] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 7.318694] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.318698] ALSA hda_intel.c:2398: Using LPIB position fix [ 7.324129] ALSA hda_intel.c:1488: Enable sync_write for stable communication [ 7.424477] hda_codec: ALC888: BIOS auto-probing. [ 7.424481] ALSA patch_realtek.c:1522: SKU: Nid=0x0 sku_cfg=0x0000e601 [ 7.424483] ALSA patch_realtek.c:1524: SKU: port_connectivity=0x0 [ 7.424485] ALSA patch_realtek.c:1525: SKU: enable_pcbeep=0x1 [ 7.424487] ALSA patch_realtek.c:1526: SKU: check_sum=0x00000000 [ 7.424488] ALSA patch_realtek.c:1527: SKU: customization=0x00000000 [ 7.424490] ALSA patch_realtek.c:1528: SKU: external_amp=0x0 [ 7.424492] ALSA patch_realtek.c:1529: SKU: platform_type=0x0 [ 7.424493] ALSA patch_realtek.c:1530: SKU: swap=0x0 [ 7.424495] ALSA patch_realtek.c:1531: SKU: override=0x1 [ 7.424499] ALSA hda_codec.c:4633: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) [ 7.424502] ALSA hda_codec.c:4637: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.424504] ALSA hda_codec.c:4641: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 7.424506] ALSA hda_codec.c:4642: mono: mono_out=0x0 [ 7.424508] ALSA hda_codec.c:4645: dig-out=0x1e/0x0 [ 7.424509] ALSA hda_codec.c:4646: inputs: [ 7.424511] ALSA hda_codec.c:4652: [ 7.424513] ALSA hda_codec.c:4654: dig-in=0x1f [ 7.426082] ALSA patch_realtek.c:1595: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888 [ 7.434051] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 7.434225] HDA Intel 0000:01:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.434228] hda_intel: Disabling MSI [ 7.434252] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 7.440050] ALSA hda_intel.c:1450: Enable delay in RIRB handling [ 8.195174] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k [ 8.950167] device-mapper: uevent: version 1.0.3 [ 8.950271] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 9.688581] kjournald starting. Commit interval 15 seconds [ 9.688881] EXT3-fs (sda7): using internal journal [ 9.688885] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 9.715068] kjournald starting. Commit interval 15 seconds [ 9.715607] EXT3-fs (sda1): using internal journal [ 9.715609] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 9.735997] kjournald starting. Commit interval 15 seconds [ 9.736211] EXT3-fs (sda6): using internal journal [ 9.736213] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 12.010365] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ (2 cpu cores) (version 2.20.00) [ 12.010414] powernow-k8: 0 : fid 0x18 (3200 MHz), vid 0x6 [ 12.010415] powernow-k8: 1 : fid 0x16 (3000 MHz), vid 0x8 [ 12.010417] powernow-k8: 2 : fid 0x14 (2800 MHz), vid 0xa [ 12.010418] powernow-k8: 3 : fid 0x12 (2600 MHz), vid 0xc [ 12.010419] powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0xe [ 12.010420] powernow-k8: 5 : fid 0xe (2200 MHz), vid 0x10 [ 12.010422] powernow-k8: 6 : fid 0xc (2000 MHz), vid 0x10 [ 12.010423] powernow-k8: 7 : fid 0xa (1800 MHz), vid 0x10 [ 12.010424] powernow-k8: 8 : fid 0x2 (1000 MHz), vid 0x12 [ 12.504017] Clocksource tsc unstable (delta = -130480912 ns) [ 13.705144] sky2 0000:03:00.0: eth0: enabling interface [ 13.705312] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.764958] sky2 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [ 16.765266] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.738535] bootsplash: status on console 0 changed to on [ 27.266023] eth0: no IPv6 routers present ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-13 18:57 ` Mark Hounschell @ 2012-10-13 19:17 ` Mark Hounschell 2012-10-14 8:41 ` Bruno Prémont 2012-10-14 8:58 ` Daniel Vetter 0 siblings, 2 replies; 25+ messages in thread From: Mark Hounschell @ 2012-10-13 19:17 UTC (permalink / raw) To: dmarkh; +Cc: Bruno Prémont, markh, linux-kernel, Intel Graphics Development On 10/13/2012 02:57 PM, Mark Hounschell wrote: > Hi Bruno, > > Thanks for the response. > > On 10/12/2012 05:14 PM, Bruno Prémont wrote: >> Hi Mark, >> >> [CCing intel-gfx] >> >> On Fri, 12 October 2012 Mark Hounschell <markh@compro.net> wrote: >>> Not sure this is the correct place to ask about a possible drm issue. I >>> have an intel based PC with an HDMI port that I'm trying to connect to >>> an LG TV. I have successfully used this HDMI port connected to an Optima >>> projector. Using that projector, everything from the BIOS post, BIOS >>> configuration, and all the way up to a graphical login worked just fine. >>> The same HDMI port and cable connected to this TV gives me the below >>> messages during boot. I also get no BIOS post or BIOS configuration >>> output while in the BIOS. I have a monitor connected to the DVI port so >>> I can see what I should see on the TV there, just as when I was >>> connected to the Optima projector. That alone makes me pretty sure it's >>> not a kernel issue but here are the messages anyway. Maybe they will >>> give someone a hint as to what the problem may be, in the case they >>> might be willing to give me any pointers. >>> >>> TV - LG 42lb9df >>> PC - intel DH77DF motherboard >> >>> [ 0.000000] Linux version 3.4.10-lcrs (root@geexbox) (gcc version >>> 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP >>> PREEMPT Wed Oct 10 16:16:16 EDT 2012 >>> ... >>> [ 1.897955] [drm] MTRR allocation failed. Graphics performance may >>> suffer. >>> [ 1.898045] i915 0000:00:02.0: irq 43 for MSI/MSI-X >>> [ 1.898050] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >>> [ 1.898051] [drm] Driver supports precise vblank timestamp query. >>> [ 1.898084] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call >>> failed >>> [ 1.898737] vgaarb: device changed decodes: >>> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem >>> [ 1.995523] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off >>> [ 2.299535] [drm:drm_edid_block_valid] *ERROR* EDID checksum is >>> invalid, remainder is 128 >>> [ 2.299865] Raw EDID: >>> [ 2.299957] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >>> [ 2.300188] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >>> [ 2.300418] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >>> [ 2.300648] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >>> [ 2.300879] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >>> [ 2.301109] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >>> [ 2.301339] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >>> [ 2.301569] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> >> This looks like your LG TV either does not provide EDID information via HDMI >> connector, or otherwise behaves in a special way which makes reading EDID >> fail. >> >> Did you try the TV on some other computer to check if EDID can be read there >> (e.g. with nvidia/amd GPU and matching open/closed driver)? >> >> Also make sure the TV is on (neither off nor on stand-by) as some TVs >> disable too much of connector interface in those states. >> > > I have another AMD based PC here with an nvidia card and HDMI port. Using > the nvidia driver, it boots up with no output to the tv until X starts. > Once X starts I get my kdm login screen. All is well except the resolution > is 800x600 and I have no VTs. I suspect if I had a properly configured > xorg.conf file, my resolution would be what I defined in it and work. > > Using the nouveau driver, I get nothing but "no signal" on the tv. Just > like the the intel box, except no EDID messages in the log file. I've > attached a dmesg outputs for each config. > > Back on the Intel machine. I boot up with a normal monitor connected to the > DVI port of the PC. Then at the kdm login screen, I disconnect the DVI > cable from the PC and connect the TV to the PCs DVI port using a DVI/HDMI > adapter. I get a beautiful 1600x1200 resolution screen on the TV. This does > not happen using the PC HDMI port. > One other thing I failed to mention. If i connect the TV HDMI to the Intel boards DVI port using the adapter, at power up I get all the BIOS messages and can enter the BIOS and all is fine. But when I let it boot all the way up like this, I get nothing but "no signal" after leaving BIOS mode. Turning the tv on/off, cable plug/unplug does not help. Mark > I have no control over the tv with regards to stand-by mode. Off is standby > mode, on is on. > >>> [ 2.434378] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. >>> [ 2.477539] checking generic (e0000000 3ff0000) vs hw (e0000000 >>> 10000000) >>> [ 2.477541] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - >>> removing generic driver >>> [ 2.477549] Console: switching to colour dummy device 80x25 >>> [ 2.477831] fbcon: inteldrmfb (fb0) is primary device >>> [ 2.637915] Console: switching to colour frame buffer device 128x48 >>> [ 2.679625] fb0: inteldrmfb frame buffer device >>> [ 2.679626] drm: registered panic notifier >>> [ 2.691536] acpi device:4b: registered as cooling_device9 >>> [ 2.691660] input: Video Bus as >>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 >>> [ 2.691698] ACPI: Video Device [GFX0] (multi-head: yes rom: no >>> post: no) >>> [ 2.691709] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on >>> minor 0 >> >>> geexbox:/home/mplayer # lspci >>> 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core >>> processor DRAM Controller (rev 09) >>> ... >>> 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd >>> Gen Core processor Graphics Controller (rev 09) >>> ... >> >> Note, usually `lspci -nn` is more informative as it also provides >> vendor/device >> IDs in addition to nice names. > > # lspci -nn > 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core > processor DRAM Controller [8086:0150] (rev 09) > 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core > processor PCI Express Root Port [8086:0151] (rev 09) > 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 > v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09) > 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series > Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) > 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 > Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) > 00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit > Network Connection [8086:1503] (rev 04) > 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series > Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) > 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset > Family PCI Express Root Port 1 [8086:1e10] (rev c4) > 00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset > Family PCI Express Root Port 8 [8086:1e1e] (rev c4) > 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series > Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) > 00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC > Controller [8086:1e4a] (rev 04) > 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series > Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) > 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family > SMBus Controller [8086:1e22] (rev 04) > 01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX8112 x1 Lane PCI > Express-to-PCI Bridge [10b5:8112] (rev aa) > 02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 > [Oxygen HD Audio] [13f6:8788] > > > I can do more to help if asked. > > Regards > Mark ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-13 19:17 ` Mark Hounschell @ 2012-10-14 8:41 ` Bruno Prémont 2012-10-14 10:34 ` Mark Hounschell 2012-10-14 10:52 ` Mark Hounschell 2012-10-14 8:58 ` Daniel Vetter 1 sibling, 2 replies; 25+ messages in thread From: Bruno Prémont @ 2012-10-14 8:41 UTC (permalink / raw) To: dmarkh; +Cc: markh, Intel Graphics Development, linux-kernel Hi Mark, On Sat, 13 October 2012 Mark Hounschell <dmarkh@cfl.rr.com> wrote: > On 10/13/2012 02:57 PM, Mark Hounschell wrote: > > On 10/12/2012 05:14 PM, Bruno Prémont wrote: > >>> TV - LG 42lb9df > >>> PC - intel DH77DF motherboard > >> > > I have another AMD based PC here with an nvidia card and HDMI port. Using > > the nvidia driver, it boots up with no output to the tv until X starts. > > Once X starts I get my kdm login screen. All is well except the resolution > > is 800x600 and I have no VTs. I suspect if I had a properly configured > > xorg.conf file, my resolution would be what I defined in it and work. > > > > Using the nouveau driver, I get nothing but "no signal" on the tv. Just > > like the the intel box, except no EDID messages in the log file. I've > > attached a dmesg outputs for each config. > > > > Back on the Intel machine. I boot up with a normal monitor connected to the > > DVI port of the PC. Then at the kdm login screen, I disconnect the DVI > > cable from the PC and connect the TV to the PCs DVI port using a DVI/HDMI > > adapter. I get a beautiful 1600x1200 resolution screen on the TV. This does > > not happen using the PC HDMI port. > > > > One other thing I failed to mention. If i connect the TV HDMI to the Intel > boards DVI port using the adapter, at power up I get all the BIOS messages > and can enter the BIOS and all is fine. But when I let it boot all the way > up like this, I get nothing but "no signal" after leaving BIOS mode. > Turning the tv on/off, cable plug/unplug does not help. Did you also try the DVI-HDMI adapter cable with the nVidia card? But will all that info I would say the issues is at the side of you TV that just does not provide (valid) EDID information, thus the driver does not know what the display supports. The 1600x1200 when switching DVI displays on Intel would seem like the driver just kept on display what it had, not reconfiguring anything. For the 800x600 of nVidia, that kind of the default fallback when display capabilities are unknown as any remotely recent display should alt least be capable to understand that. Your best solution is probably to write an EDID blob (or reuse one you find somewhere) that provides at least one mode matching your TV's native mode (probably full-HD). Google suggested the following document: http://www.jordansmanuals.com/ServiceManuals%5CLG%5CTV%5CLCD%5C42LB9DF%5C42LB9DF%20Service%20Manual.pdf which on page 13/14 shows the full EDID blob for the various HDMI outputs of the TV. You may want to read that document, convert the EDID blobs to 512 bytes binary files and hell DRM core to use the right one via module/kernel cmdline option: drm_kms_helper.edid_firmware=edid/lg42lb9df.edid or modprobe drm-kms-helper edid_firmware=edid/lg42lb9df.edid where /lib/firmware/edid/lg42lb9df.edid is the 512-bytes EDID blob created according to data from above manual. (note, that will only work for intel, radeon and nouveau drivers but will not work for closed drivers of AMD/nVidia) PS: If you didn't already do so, try all of the HDMI connectors or the TV and if available, also two distinct HDMI cables of different brand. Bruno > Mark > > > I have no control over the tv with regards to stand-by mode. Off is standby > > mode, on is on. > > > >>> [ 2.434378] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. > >>> [ 2.477539] checking generic (e0000000 3ff0000) vs hw (e0000000 > >>> 10000000) > >>> [ 2.477541] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - > >>> removing generic driver > >>> [ 2.477549] Console: switching to colour dummy device 80x25 > >>> [ 2.477831] fbcon: inteldrmfb (fb0) is primary device > >>> [ 2.637915] Console: switching to colour frame buffer device 128x48 > >>> [ 2.679625] fb0: inteldrmfb frame buffer device > >>> [ 2.679626] drm: registered panic notifier > >>> [ 2.691536] acpi device:4b: registered as cooling_device9 > >>> [ 2.691660] input: Video Bus as > >>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 > >>> [ 2.691698] ACPI: Video Device [GFX0] (multi-head: yes rom: no > >>> post: no) > >>> [ 2.691709] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on > >>> minor 0 > >> > >>> geexbox:/home/mplayer # lspci > >>> 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core > >>> processor DRAM Controller (rev 09) > >>> ... > >>> 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd > >>> Gen Core processor Graphics Controller (rev 09) > >>> ... > >> > >> Note, usually `lspci -nn` is more informative as it also provides > >> vendor/device > >> IDs in addition to nice names. > > > > # lspci -nn > > 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core > > processor DRAM Controller [8086:0150] (rev 09) > > 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core > > processor PCI Express Root Port [8086:0151] (rev 09) > > 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 > > v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09) > > 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series > > Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) > > 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 > > Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) > > 00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit > > Network Connection [8086:1503] (rev 04) > > 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series > > Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) > > 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset > > Family PCI Express Root Port 1 [8086:1e10] (rev c4) > > 00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset > > Family PCI Express Root Port 8 [8086:1e1e] (rev c4) > > 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series > > Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) > > 00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC > > Controller [8086:1e4a] (rev 04) > > 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series > > Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) > > 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family > > SMBus Controller [8086:1e22] (rev 04) > > 01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX8112 x1 Lane PCI > > Express-to-PCI Bridge [10b5:8112] (rev aa) > > 02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 > > [Oxygen HD Audio] [13f6:8788] > > > > > > I can do more to help if asked. > > > > Regards > > Mark > > _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 8:41 ` Bruno Prémont @ 2012-10-14 10:34 ` Mark Hounschell 2012-10-14 10:52 ` Mark Hounschell 1 sibling, 0 replies; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 10:34 UTC (permalink / raw) To: Bruno Prémont; +Cc: markh, linux-kernel, Intel Graphics Development On 10/14/2012 04:41 AM, Bruno Prémont wrote: > Hi Mark, > > On Sat, 13 October 2012 Mark Hounschell <dmarkh@cfl.rr.com> wrote: >> On 10/13/2012 02:57 PM, Mark Hounschell wrote: >>> On 10/12/2012 05:14 PM, Bruno Prémont wrote: >>>>> TV - LG 42lb9df >>>>> PC - intel DH77DF motherboard >>>> >>> I have another AMD based PC here with an nvidia card and HDMI port. Using >>> the nvidia driver, it boots up with no output to the tv until X starts. >>> Once X starts I get my kdm login screen. All is well except the resolution >>> is 800x600 and I have no VTs. I suspect if I had a properly configured >>> xorg.conf file, my resolution would be what I defined in it and work. >>> >>> Using the nouveau driver, I get nothing but "no signal" on the tv. Just >>> like the the intel box, except no EDID messages in the log file. I've >>> attached a dmesg outputs for each config. >>> >>> Back on the Intel machine. I boot up with a normal monitor connected to the >>> DVI port of the PC. Then at the kdm login screen, I disconnect the DVI >>> cable from the PC and connect the TV to the PCs DVI port using a DVI/HDMI >>> adapter. I get a beautiful 1600x1200 resolution screen on the TV. This does >>> not happen using the PC HDMI port. >>> >> >> One other thing I failed to mention. If i connect the TV HDMI to the Intel >> boards DVI port using the adapter, at power up I get all the BIOS messages >> and can enter the BIOS and all is fine. But when I let it boot all the way >> up like this, I get nothing but "no signal" after leaving BIOS mode. >> Turning the tv on/off, cable plug/unplug does not help. > > Did you also try the DVI-HDMI adapter cable with the nVidia card? > No, I didn't try that. I certainly can though. > But will all that info I would say the issues is at the side of you TV that > just does not provide (valid) EDID information, thus the driver does not know > what the display supports. > > The 1600x1200 when switching DVI displays on Intel would seem like the driver > just kept on display what it had, not reconfiguring anything. > Right, that's what I thought was happening. But at least it tells me that the tv can in fact "probably" operate in whatever resolution I force it to. Is there no way, like in the past we had to do, to just not care what the tv/monitor says or does, and just use a fixed resolution? > For the 800x600 of nVidia, that kind of the default fallback when display > capabilities are unknown as any remotely recent display should alt least be > capable to understand that. > Yep, that's what I figured here too. nvidia provides a "default/fallback" so you can at least access the desktop. Seems a reasonable thing, no? > > Your best solution is probably to write an EDID blob (or reuse one you find > somewhere) that provides at least one mode matching your TV's native mode > (probably full-HD). > > Google suggested the following document: > http://www.jordansmanuals.com/ServiceManuals%5CLG%5CTV%5CLCD%5C42LB9DF%5C42LB9DF%20Service%20Manual.pdf > which on page 13/14 shows the full EDID blob for the various HDMI outputs of the > TV. You may want to read that document, convert the EDID blobs to 512 bytes binary > files and hell DRM core to use the right one via module/kernel cmdline option: > > drm_kms_helper.edid_firmware=edid/lg42lb9df.edid > or > modprobe drm-kms-helper edid_firmware=edid/lg42lb9df.edid > > where > /lib/firmware/edid/lg42lb9df.edid > is the 512-bytes EDID blob created according to data from above manual. > (note, that will only work for intel, radeon and nouveau drivers but will > not work for closed drivers of AMD/nVidia) > Thanks for this tip. I will investigate this asap. > PS: If you didn't already do so, try all of the HDMI connectors or the TV and > if available, also two distinct HDMI cables of different brand. Did all that, first thing. Thanks Mark ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 8:41 ` Bruno Prémont 2012-10-14 10:34 ` Mark Hounschell @ 2012-10-14 10:52 ` Mark Hounschell 2012-10-14 11:03 ` Bruno Prémont 1 sibling, 1 reply; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 10:52 UTC (permalink / raw) To: Bruno Prémont; +Cc: markh, linux-kernel, Intel Graphics Development On 10/14/2012 04:41 AM, Bruno Prémont wrote: > > Your best solution is probably to write an EDID blob (or reuse one you find > somewhere) that provides at least one mode matching your TV's native mode > (probably full-HD). > > Google suggested the following document: > http://www.jordansmanuals.com/ServiceManuals%5CLG%5CTV%5CLCD%5C42LB9DF%5C42LB9DF%20Service%20Manual.pdf > which on page 13/14 shows the full EDID blob for the various HDMI outputs of the > TV. You may want to read that document, convert the EDID blobs to 512 bytes binary > files and hell DRM core to use the right one via module/kernel cmdline option: > > drm_kms_helper.edid_firmware=edid/lg42lb9df.edid > or > modprobe drm-kms-helper edid_firmware=edid/lg42lb9df.edid > > where > /lib/firmware/edid/lg42lb9df.edid > is the 512-bytes EDID blob created according to data from above manual. > (note, that will only work for intel, radeon and nouveau drivers but will > not work for closed drivers of AMD/nVidia) > This certainly looks doable. That firmware file, should it contain all 4 tables or just the one for the port I'm connected to? Will it matter what order they were in? Thanks Mark ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 10:52 ` Mark Hounschell @ 2012-10-14 11:03 ` Bruno Prémont 2012-10-14 16:54 ` Mark Hounschell 0 siblings, 1 reply; 25+ messages in thread From: Bruno Prémont @ 2012-10-14 11:03 UTC (permalink / raw) To: dmarkh; +Cc: markh, Intel Graphics Development, linux-kernel On Sun, 14 October 2012 Mark Hounschell <dmarkh@cfl.rr.com> wrote: > On 10/14/2012 04:41 AM, Bruno Prémont wrote: > > Your best solution is probably to write an EDID blob (or reuse one you find > > somewhere) that provides at least one mode matching your TV's native mode > > (probably full-HD). > > > > Google suggested the following document: > > http://www.jordansmanuals.com/ServiceManuals%5CLG%5CTV%5CLCD%5C42LB9DF%5C42LB9DF%20Service%20Manual.pdf > > which on page 13/14 shows the full EDID blob for the various HDMI outputs of the > > TV. You may want to read that document, convert the EDID blobs to 512 bytes binary > > files and hell DRM core to use the right one via module/kernel cmdline option: > > > > drm_kms_helper.edid_firmware=edid/lg42lb9df.edid > > or > > modprobe drm-kms-helper edid_firmware=edid/lg42lb9df.edid > > > > where > > /lib/firmware/edid/lg42lb9df.edid > > is the 512-bytes EDID blob created according to data from above manual. > > (note, that will only work for intel, radeon and nouveau drivers but will > > not work for closed drivers of AMD/nVidia) > > > > This certainly looks doable. That firmware file, should it contain all 4 > tables or just the one for the port I'm connected to? Will it matter what > order they were in? It should contain just the table for the port you're connected to. For the HDMI ports the tables are 1024 bytes (e.g. two 512 bytes blocks, not just one as I incorrectly wrote above). For the VGA port it's just one 512 bytes block. Oh, and check the exact documentation of edid_firmware parameter as you can adjust its value to tell kernel to which connector exactly it applies (otherwise it will overwrite the EDID on other ports with working displays!). Bruno > Thanks > Mark > _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 11:03 ` Bruno Prémont @ 2012-10-14 16:54 ` Mark Hounschell 2012-10-14 17:22 ` Bruno Prémont 0 siblings, 1 reply; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 16:54 UTC (permalink / raw) To: Bruno Prémont; +Cc: markh, linux-kernel, Intel Graphics Development On 10/14/2012 07:03 AM, Bruno Prémont wrote: > On Sun, 14 October 2012 Mark Hounschell <dmarkh@cfl.rr.com> wrote: >> On 10/14/2012 04:41 AM, Bruno Prémont wrote: >>> Your best solution is probably to write an EDID blob (or reuse one you find >>> somewhere) that provides at least one mode matching your TV's native mode >>> (probably full-HD). >>> >>> Google suggested the following document: >>> http://www.jordansmanuals.com/ServiceManuals%5CLG%5CTV%5CLCD%5C42LB9DF%5C42LB9DF%20Service%20Manual.pdf >>> which on page 13/14 shows the full EDID blob for the various HDMI outputs of the >>> TV. You may want to read that document, convert the EDID blobs to 512 bytes binary >>> files and hell DRM core to use the right one via module/kernel cmdline option: >>> >>> drm_kms_helper.edid_firmware=edid/lg42lb9df.edid >>> or >>> modprobe drm-kms-helper edid_firmware=edid/lg42lb9df.edid >>> >>> where >>> /lib/firmware/edid/lg42lb9df.edid >>> is the 512-bytes EDID blob created according to data from above manual. >>> (note, that will only work for intel, radeon and nouveau drivers but will >>> not work for closed drivers of AMD/nVidia) >>> >> >> This certainly looks doable. That firmware file, should it contain all 4 >> tables or just the one for the port I'm connected to? Will it matter what >> order they were in? > > It should contain just the table for the port you're connected to. > For the HDMI ports the tables are 1024 bytes (e.g. two 512 bytes blocks, > not just one as I incorrectly wrote above). For the VGA port it's just one > 512 bytes block. > > Oh, and check the exact documentation of edid_firmware parameter as you can > adjust its value to tell kernel to which connector exactly it applies > (otherwise it will overwrite the EDID on other ports with working displays!). > Hi Bruno, I've taken the EDID data from that service manual. I've looked at the EDID-Howto for how to specify the connector but all I see is: "An EDID data set will only be used for a particular connector, if its name and a colon are prepended to the EDID name." Where can I find the connector names? And could I ask if this simple pgm might work to build the file I need? int32_t main(int argc, char **argv) { FILE *fd; const char *path = "/lib/firmware/edid/lg42lb9df.edid"; const char *mode = "w+"; uint8_t firmware[1024] = { 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x1E, 0x6D, 0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x0E, 0x10, 0x01, 0x03, 0x80, 0x73, 0x41, 0x96, 0x0A, 0xCF, 0x74, 0xA3, 0x57, 0x4C, 0xB0, 0x23, 0x09, 0x48, 0x4C, 0xAF, 0xCF, 0x00, 0x31, 0x40, 0x45, 0x40, 0x61, 0x40, 0x81, 0x80, 0xA9, 0x40, 0xD1, 0xC0, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3A, 0x80, 0x18, 0x71, 0x38, 0x2D, 0x40, 0x58, 0x2C, 0x45, 0x00, 0xC4, 0x8E, 0x21, 0x00, 0x00, 0x1E, 0x66, 0x21, 0x50, 0xB0, 0x51, 0x00, 0x1B, 0x30, 0x40, 0x70, 0x36, 0x00, 0xC4, 0x8E, 0x21, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x00, 0xFD, 0x00, 0x38, 0x4B, 0x1F, 0x44, 0x0F, 0x00, 0x0A, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x4C, 0x47, 0x20, 0x54, 0x56, 0x0A, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x01, 0x15, 0x02, 0x03, 0x1B, 0xF1, 0x4C, 0x20, 0x22, 0x10, 0x1F, 0x01, 0x02, 0x03, 0x04, 0x05, 0x12, 0x93, 0x14, 0x23, 0x15, 0x07, 0x50, 0x65, 0x03, 0x0C, 0x00, 0x10, 0x00, 0x01, 0x1D, 0x00, 0x72, 0x51, 0xD0, 0x1E, 0x20, 0x6E, 0x28, 0x55, 0x00, 0xC4, 0x8E, 0x21, 0x00, 0x00, 0x1E, 0x01, 0x1D, 0x80, 0x18, 0x71, 0x1C, 0x16, 0x20, 0x58, 0x2C, 0x25, 0x00, 0xC4, 0x8E, 0x21, 0x00, 0x00, 0x9E, 0x8C, 0x0A, 0xD0, 0x90, 0x20, 0x40, 0x31, 0x20, 0x0C, 0x40, 0x55, 0x00, 0x4C, 0x6C, 0x42, 0x00, 0x00, 0x18, 0x01, 0x1D, 0x00, 0xBC, 0x52, 0xD0, 0x1E, 0x20, 0xB8, 0x28, 0x55, 0x40, 0x4C, 0x6C, 0x42, 0x00, 0x00, 0x1E, 0x01, 0x1D, 0x80, 0xD0, 0x72, 0x1C, 0x16, 0x20, 0x10, 0x2C, 0x25, 0x80, 0x4C, 0x6C, 0x42, 0x00, 0x00, 0x9E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xED }; fd = fopen(path, mode); if (fd == NULL) { perror("/lib/firmware/edid/lg42lb9df.edid failed: "); return 1; } fwrite(&firmware, 1024, 1, fd); fclose(fd); printf("Wrote 1024 bytes of edid data to %s\n", path); return 0; } Thanks very much Mark ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 16:54 ` Mark Hounschell @ 2012-10-14 17:22 ` Bruno Prémont 2012-10-14 18:03 ` Mark Hounschell 0 siblings, 1 reply; 25+ messages in thread From: Bruno Prémont @ 2012-10-14 17:22 UTC (permalink / raw) To: dmarkh; +Cc: markh, linux-kernel, Intel Graphics Development Hi Mark, On Sun, 14 October 2012 Mark Hounschell <dmarkh@cfl.rr.com> wrote: > I've taken the EDID data from that service manual. I've looked at the > EDID-Howto for how to specify the connector but all I see is: > > "An EDID data set will only be used for a particular connector, > if its name and a colon are prepended to the EDID name." > > Where can I find the connector names? Those are the ones you see under /sys/class/drm/, without the card0- prefix. E.g. on my system I have: # ls /sys/class/drm/ card0 card0-DVI-I-1 card0-LVDS-1 card0-VGA-1 controlD64 version Thus I have connectors "DVI-I-1", "LVDS-1" and "VGA-1" (note that your HDMI connector might not be named HDMI-1, if you are not sure which one it is, you can look at the files below (edid, enabled, status) which should help your find the right connector). In addition, if you rmmod i915 and modprobe it again connectors will get increased suffix numbers. So don't expect them to remain the same if you have multiple GPUs detected in random order or if you rebind them to their driver. (though except during testing or for special systems you don't have to worry about this) > And could I ask if this simple pgm might work to build the file I need? It looks fine. You can also check the output with hexdump just to make sure it looks sane. If it's broken kernel will tell you that checksum does not match. In any case the (successful) loading of edid should be visible in kernel log. Bruno > int32_t main(int argc, char **argv) > { > FILE *fd; > const char *path = "/lib/firmware/edid/lg42lb9df.edid"; > const char *mode = "w+"; > uint8_t firmware[1024] = { > > 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x1E, > 0x6D, 0x01, 0x00, 0x01, 0x01, 0x01, 0x01, > 0x0E, 0x10, 0x01, 0x03, 0x80, 0x73, 0x41, 0x96, 0x0A, > 0xCF, 0x74, 0xA3, 0x57, 0x4C, 0xB0, 0x23, > 0x09, 0x48, 0x4C, 0xAF, 0xCF, 0x00, 0x31, 0x40, 0x45, > 0x40, 0x61, 0x40, 0x81, 0x80, 0xA9, 0x40, > 0xD1, 0xC0, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3A, 0x80, > 0x18, 0x71, 0x38, 0x2D, 0x40, 0x58, 0x2C, > 0x45, 0x00, 0xC4, 0x8E, 0x21, 0x00, 0x00, 0x1E, 0x66, > 0x21, 0x50, 0xB0, 0x51, 0x00, 0x1B, 0x30, > 0x40, 0x70, 0x36, 0x00, 0xC4, 0x8E, 0x21, 0x00, 0x00, > 0x1E, 0x00, 0x00, 0x00, 0xFD, 0x00, 0x38, > 0x4B, 0x1F, 0x44, 0x0F, 0x00, 0x0A, 0x20, 0x20, 0x20, > 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xFC, > 0x00, 0x4C, 0x47, 0x20, 0x54, 0x56, 0x0A, 0x20, 0x20, > 0x20, 0x20, 0x20, 0x20, 0x20, 0x01, 0x15, > > 0x02, 0x03, 0x1B, 0xF1, 0x4C, 0x20, 0x22, 0x10, 0x1F, > 0x01, 0x02, 0x03, 0x04, 0x05, 0x12, 0x93, > 0x14, 0x23, 0x15, 0x07, 0x50, 0x65, 0x03, 0x0C, 0x00, > 0x10, 0x00, 0x01, 0x1D, 0x00, 0x72, 0x51, > 0xD0, 0x1E, 0x20, 0x6E, 0x28, 0x55, 0x00, 0xC4, 0x8E, > 0x21, 0x00, 0x00, 0x1E, 0x01, 0x1D, 0x80, > 0x18, 0x71, 0x1C, 0x16, 0x20, 0x58, 0x2C, 0x25, 0x00, > 0xC4, 0x8E, 0x21, 0x00, 0x00, 0x9E, 0x8C, > 0x0A, 0xD0, 0x90, 0x20, 0x40, 0x31, 0x20, 0x0C, 0x40, > 0x55, 0x00, 0x4C, 0x6C, 0x42, 0x00, 0x00, > 0x18, 0x01, 0x1D, 0x00, 0xBC, 0x52, 0xD0, 0x1E, 0x20, > 0xB8, 0x28, 0x55, 0x40, 0x4C, 0x6C, 0x42, > 0x00, 0x00, 0x1E, 0x01, 0x1D, 0x80, 0xD0, 0x72, 0x1C, > 0x16, 0x20, 0x10, 0x2C, 0x25, 0x80, 0x4C, > 0x6C, 0x42, 0x00, 0x00, 0x9E, 0x00, 0x00, 0x00, 0x00, > 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xED > }; > > fd = fopen(path, mode); > if (fd == NULL) { > perror("/lib/firmware/edid/lg42lb9df.edid failed: "); > return 1; > } > > fwrite(&firmware, 1024, 1, fd); > > fclose(fd); > > printf("Wrote 1024 bytes of edid data to %s\n", path); > > return 0; > } > > Thanks very much > Mark ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 17:22 ` Bruno Prémont @ 2012-10-14 18:03 ` Mark Hounschell 2012-10-14 18:19 ` Bruno Prémont 0 siblings, 1 reply; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 18:03 UTC (permalink / raw) To: Bruno Prémont; +Cc: markh, linux-kernel, Intel Graphics Development On 10/14/2012 01:22 PM, Bruno Prémont wrote: > Hi Mark, > > On Sun, 14 October 2012 Mark Hounschell <dmarkh@cfl.rr.com> wrote: >> I've taken the EDID data from that service manual. I've looked at the >> EDID-Howto for how to specify the connector but all I see is: >> >> "An EDID data set will only be used for a particular connector, >> if its name and a colon are prepended to the EDID name." >> >> Where can I find the connector names? > > Those are the ones you see under /sys/class/drm/, without the card0- > prefix. > > E.g. on my system I have: > > # ls /sys/class/drm/ > card0 card0-DVI-I-1 card0-LVDS-1 card0-VGA-1 controlD64 version > > Thus I have connectors "DVI-I-1", "LVDS-1" and "VGA-1" (note that your > HDMI connector might not be named HDMI-1, if you are not sure which one > it is, you can look at the files below (edid, enabled, status) which > should help your find the right connector). > Perfect. > > In addition, if you rmmod i915 and modprobe it again connectors will get > increased suffix numbers. So don't expect them to remain the same if you > have multiple GPUs detected in random order or if you rebind them to > their driver. (though except during testing or for special systems you > don't have to worry about this) > >> And could I ask if this simple pgm might work to build the file I need? > > It looks fine. You can also check the output with hexdump just to > make sure it looks sane. Did that and the data looks swapped compared to the array written, but I guess that's normal? > If it's broken kernel will tell you that checksum does not match. > So the check sum is actually already in the data provided by the service manual then. > In any case the (successful) loading of edid should be visible in kernel > log. > I'll be trying this a little later in the day. Thanks again Mark ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 18:03 ` Mark Hounschell @ 2012-10-14 18:19 ` Bruno Prémont 2012-10-14 18:57 ` Mark Hounschell 0 siblings, 1 reply; 25+ messages in thread From: Bruno Prémont @ 2012-10-14 18:19 UTC (permalink / raw) To: dmarkh; +Cc: markh, Intel Graphics Development, linux-kernel On Sun, 14 October 2012 Mark Hounschell <dmarkh@cfl.rr.com> wrote: > >> And could I ask if this simple pgm might work to build the file I need? > > > > It looks fine. You can also check the output with hexdump just to > > make sure it looks sane. > > Did that and the data looks swapped compared to the array written, but I > guess that's normal? That might very well be presentation issue, how did you call hexdump? When called with no arguments but filename it groups bytes as words and those look swapped (on little-endian), but `hexdump -C $file` is fine, dumping each byte individually. > > If it's broken kernel will tell you that checksum does not match. > > > > So the check sum is actually already in the data provided by the service > manual then. Yes, checksum byte is part of the EDID blob. Bruno > > In any case the (successful) loading of edid should be visible in kernel > > log. > > > > I'll be trying this a little later in the day. > > Thanks again > Mark ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 18:19 ` Bruno Prémont @ 2012-10-14 18:57 ` Mark Hounschell 2012-10-14 20:40 ` Bruno Prémont 0 siblings, 1 reply; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 18:57 UTC (permalink / raw) To: Bruno Prémont; +Cc: markh, linux-kernel, Intel Graphics Development [-- Attachment #1: Type: text/plain, Size: 1680 bytes --] On 10/14/2012 02:19 PM, Bruno Prémont wrote: > On Sun, 14 October 2012 Mark Hounschell <dmarkh@cfl.rr.com> wrote: >>>> And could I ask if this simple pgm might work to build the file I need? >>> >>> It looks fine. You can also check the output with hexdump just to >>> make sure it looks sane. >> >> Did that and the data looks swapped compared to the array written, but I >> guess that's normal? > > That might very well be presentation issue, how did you call hexdump? > When called with no arguments but filename it groups bytes as words and > those look swapped (on little-endian), but `hexdump -C $file` is fine, > dumping each byte individually. > Yep, its right with -C >>> If it's broken kernel will tell you that checksum does not match. >>> >> >> So the check sum is actually already in the data provided by the service >> manual then. > > Yes, checksum byte is part of the EDID blob. > > Bruno > >>> In any case the (successful) loading of edid should be visible in kernel >>> log. >>> >> >> I'll be trying this a little later in the day. I gave it a try. I don't think it liked my kernel cmdline. dmesg attached. There is a lot more in there now that nomodeset is gone and the debug is turned on. # ls -al /lib/firmware/edid/lg42lb9df.edid -rw-r--r-- 1 root root 1024 Oct 14 2012 /lib/firmware/edid/lg42lb9df.edid ## cat /proc/cmdline root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 noresume splash=silent quiet apm=off vga=normal drm.debug=0xe irqpoll drm_kms_helper.edid_firmware=edid/lg42lb9df.edid from attached dmesg: 1.833032] drm_kms_helper: Unknown parameter `edid' Mark [-- Attachment #2: dmesg-hdmi_only-3.6.2-3 --] [-- Type: text/plain, Size: 163042 bytes --] [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.2 (root@geexbox) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #2 SMP PREEMPT Sun Oct 14 08:55:34 EDT 2012 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9e5efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9e5f000-0x00000000da25afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da25b000-0x00000000da266fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da267000-0x00000000da2f2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da2f3000-0x00000000da2f8fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da2f9000-0x00000000da37afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da37b000-0x00000000da40cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da40d000-0x00000000da6a2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da6a3000-0x00000000da6a3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da6a4000-0x00000000da6e6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da6e7000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: /DH77DF, BIOS KCH7710H.86A.0095.2012.0608.1754 06/08/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 5 base 21F800000 mask FFF800000 uncachable [ 0.000000] 6 base 21F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [c00fd770] [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x00bfa000-0x00bfffff] [ 0.000000] RAMDISK: [mem 0x1e6ac000-0x1ffeffff] [ 0.000000] ACPI: RSDP 000f0490 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT da25b070 00064 (v01 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: FACP da264db8 000F4 (v04 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: DSDT da25b168 09C49 (v02 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: FACS da40bf80 00040 [ 0.000000] ACPI: APIC da264eb0 00072 (v03 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: FPDT da264f28 00044 (v01 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: MCFG da264f70 0003C (v01 INTEL DH77DF 0000005F MSFT 00000097) [ 0.000000] ACPI: HPET da264fb0 00038 (v01 INTEL DH77DF 0000005F AMI. 00000005) [ 0.000000] ACPI: SSDT da264fe8 0036D (v01 INTEL DH77DF 0000005F INTL 20091112) [ 0.000000] ACPI: SSDT da265358 009AA (v01 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: SSDT da265d08 00A92 (v01 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2616MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0xdaffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xd9e5efff] [ 0.000000] node 0: [mem 0xda2f9000-0xda37afff] [ 0.000000] node 0: [mem 0xda6a3000-0xda6a3fff] [ 0.000000] node 0: [mem 0xda6e7000-0xdaffffff] [ 0.000000] On node 0 totalpages: 894343 [ 0.000000] free_area_init_node: node 0, pgdat c0894340, node_mem_map f5c9d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 220974 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5233 pages used for memmap [ 0.000000] HighMem zone: 662411 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5c5b000 s26944 r0 d22208 u49152 [ 0.000000] pcpu-alloc: s26944 r0 d22208 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 887334 [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 noresume splash=silent quiet apm=off vga=normal drm.debug=0xe irqpoll drm_kms_helper.edid_firmware=edid/lg42lb9df.edid [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Initializing HighMem for node 0 (000377fe:000db000) [ 0.000000] Memory: 3514572k/3588096k available (4577k kernel code, 62800k reserved, 2220k data, 452k init, 2670576k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc08a4000 - 0xc0915000 ( 452 kB) [ 0.000000] .data : 0xc0678452 - 0xc08a3800 (2220 kB) [ 0.000000] .text : 0xc0200000 - 0xc0678452 (4577 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.003333] tsc: Detected 3392.460 MHz processor [ 0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.62 BogoMIPS (lpj=11308200) [ 0.000002] pid_max: default: 32768 minimum: 301 [ 0.000014] Security Framework initialized [ 0.000023] AppArmor: AppArmor initialized [ 0.000028] Mount-cache hash table entries: 512 [ 0.000134] Initializing cgroup subsys net_cls [ 0.000135] Initializing cgroup subsys blkio [ 0.000152] CPU: Physical Processor ID: 0 [ 0.000152] CPU: Processor Core ID: 0 [ 0.000155] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000155] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000693] mce: CPU supports 9 MCE banks [ 0.000703] CPU0: Thermal monitoring enabled (TM1) [ 0.000707] process: using mwait in idle threads [ 0.000712] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.000712] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000712] tlb_flushall_shift is 0x1 [ 0.001276] ACPI: Core revision 20120711 [ 0.007331] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.007753] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040663] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz stepping 09 [ 0.146597] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver. [ 0.146601] ... version: 3 [ 0.146602] ... bit width: 48 [ 0.146602] ... generic registers: 8 [ 0.146603] ... value mask: 0000ffffffffffff [ 0.146604] ... max period: 000000007fffffff [ 0.146604] ... fixed-purpose events: 3 [ 0.146605] ... event mask: 00000007000000ff [ 0.193135] CPU 1 irqstacks, hard=f54b0000 soft=f54b2000 [ 0.203369] Initializing CPU#1 [ 0.193138] smpboot: Booting Node 0, Processors #1 [ 0.219725] CPU 2 irqstacks, hard=f54c6000 soft=f54c8000 [ 0.229995] Initializing CPU#2 [ 0.219728] #2 [ 0.246315] CPU 3 irqstacks, hard=f54e0000 soft=f54e2000 [ 0.246318] #3 OK [ 0.256585] Initializing CPU#3 [ 0.260020] Brought up 4 CPUs [ 0.260022] smpboot: Total of 4 processors activated (27150.50 BogoMIPS) [ 0.262488] devtmpfs: initialized [ 0.262654] PM: Registering ACPI NVS region [mem 0xda37b000-0xda40cfff] (598016 bytes) [ 0.262659] PM: Registering ACPI NVS region [mem 0xda6a4000-0xda6e6fff] (274432 bytes) [ 0.262712] dummy: [ 0.262741] RTC time: 14:36:59, date: 10/14/12 [ 0.262764] NET: Registered protocol family 16 [ 0.302930] ACPI: bus type pci registered [ 0.302975] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.302977] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.302977] PCI: Using MMCONFIG for extended config space [ 0.302978] PCI: Using configuration type 1 for base access [ 0.303432] bio: create slab <bio-0> at 0 [ 0.303468] ACPI: Added _OSI(Module Device) [ 0.303469] ACPI: Added _OSI(Processor Device) [ 0.303470] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.303471] ACPI: Added _OSI(Processor Aggregator Device) [ 0.304800] ACPI: EC: Look up EC in DSDT [ 0.306319] ACPI: Executed 1 blocks of module-level executable AML code [ 0.316838] ACPI: SSDT da293018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.317174] ACPI: Dynamic OEM Table Load: [ 0.317176] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.326299] ACPI: SSDT da294a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.326666] ACPI: Dynamic OEM Table Load: [ 0.326667] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.336460] ACPI: SSDT da299c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.336798] ACPI: Dynamic OEM Table Load: [ 0.336799] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.350280] ACPI: Interpreter enabled [ 0.350285] ACPI: (supports S0 S3 S4 S5) [ 0.350297] ACPI: Using IOAPIC for interrupt routing [ 0.354268] ACPI: Power Resource [FN00] (off) [ 0.354318] ACPI: Power Resource [FN01] (off) [ 0.354365] ACPI: Power Resource [FN02] (off) [ 0.354413] ACPI: Power Resource [FN03] (off) [ 0.354460] ACPI: Power Resource [FN04] (off) [ 0.354817] ACPI: No dock devices found. [ 0.354821] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.355053] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.355383] PCI host bridge to bus 0000:00 [ 0.355385] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff] [ 0.355386] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.355388] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.355389] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.355390] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.355391] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.355392] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.355393] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.355395] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.355396] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.355397] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.355398] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.355404] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.355433] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.355455] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.355474] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000 [ 0.355481] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.355485] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.355488] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 0.355532] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.355552] pci 0000:00:14.0: reg 10: [mem 0xf7d20000-0xf7d2ffff 64bit] [ 0.355617] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.355638] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.355659] pci 0000:00:16.0: reg 10: [mem 0xf7d37000-0xf7d3700f 64bit] [ 0.355730] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.355757] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.355773] pci 0000:00:19.0: reg 10: [mem 0xf7d00000-0xf7d1ffff] [ 0.355780] pci 0000:00:19.0: reg 14: [mem 0xf7d35000-0xf7d35fff] [ 0.355788] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f] [ 0.355845] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.355868] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.355887] pci 0000:00:1a.0: reg 10: [mem 0xf7d34000-0xf7d343ff] [ 0.355970] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.355997] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.356125] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.356162] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 0.356233] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.356259] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.356278] pci 0000:00:1d.0: reg 10: [mem 0xf7d33000-0xf7d333ff] [ 0.356361] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.356383] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100 [ 0.356500] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.356516] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7] [ 0.356523] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3] [ 0.356530] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7] [ 0.356537] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3] [ 0.356544] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 0.356551] pci 0000:00:1f.2: reg 24: [mem 0xf7d32000-0xf7d327ff] [ 0.356590] pci 0000:00:1f.2: PME# supported from D3hot [ 0.356606] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.356618] pci 0000:00:1f.3: reg 10: [mem 0xf7d31000-0xf7d310ff 64bit] [ 0.356638] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 0.356675] pci_bus 0000:01: busn_res: [bus 01-02] is inserted under [bus 00-3e] [ 0.356692] pci 0000:01:00.0: [10b5:8112] type 01 class 0x060400 [ 0.356797] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.356805] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.356807] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.356853] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 01-02] [ 0.356873] pci 0000:02:04.0: [13f6:8788] type 00 class 0x040100 [ 0.356896] pci 0000:02:04.0: reg 10: [io 0xe000-0xe0ff] [ 0.357006] pci 0000:02:04.0: supports D1 D2 [ 0.357058] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.357062] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.357146] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e] [ 0.357149] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.357201] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-3e] [ 0.357204] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.357207] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.357211] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.357230] pci_bus 0000:00: on NUMA node 0 [ 0.357231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.357319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.357346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT] [ 0.357369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.357460] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.357598] pci0000:00: ACPI _OSC control (0x18) granted [ 0.360453] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.360492] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.360529] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.360565] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.360602] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.360640] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.360673] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.360711] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.360754] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.360757] vgaarb: loaded [ 0.360757] vgaarb: bridge control possible 0000:00:02.0 [ 0.360815] SCSI subsystem initialized [ 0.360817] ACPI: bus type scsi registered [ 0.360834] libata version 3.00 loaded. [ 0.360843] ACPI: bus type usb registered [ 0.360852] usbcore: registered new interface driver usbfs [ 0.360857] usbcore: registered new interface driver hub [ 0.360868] usbcore: registered new device driver usb [ 0.360894] PCI: Using ACPI for IRQ routing [ 0.362262] PCI: pci_cache_line_size set to 64 bytes [ 0.362309] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.362310] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.362311] e820: reserve RAM buffer [mem 0xd9e5f000-0xdbffffff] [ 0.362313] e820: reserve RAM buffer [mem 0xda37b000-0xdbffffff] [ 0.362315] e820: reserve RAM buffer [mem 0xda6a4000-0xdbffffff] [ 0.362316] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.362366] NetLabel: Initializing [ 0.362367] NetLabel: domain hash size = 128 [ 0.362367] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.362373] NetLabel: unlabeled traffic allowed by default [ 0.362425] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.362428] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.364434] Switching to clocksource hpet [ 0.364474] AppArmor: AppArmor Filesystem Enabled [ 0.364482] pnp: PnP ACPI init [ 0.364487] ACPI: bus type pnp registered [ 0.364669] pnp 00:00: [bus 00-3e] [ 0.364671] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.364672] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.364673] pnp 00:00: [io 0x0d00-0xffff window] [ 0.364674] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.364675] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.364676] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.364677] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.364678] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.364679] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.364681] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.364682] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.364683] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.364684] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.364685] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.364686] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.364687] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.364689] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.364690] pnp 00:00: [mem 0xdfa00000-0xfeafffff window] [ 0.364691] pnp 00:00: [mem 0x00010000-0x0001ffff window] [ 0.364721] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.364737] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.364754] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.364756] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.364763] pnp 00:02: [io 0x0000-0x001f] [ 0.364764] pnp 00:02: [io 0x0081-0x0091] [ 0.364765] pnp 00:02: [io 0x0093-0x009f] [ 0.364766] pnp 00:02: [io 0x00c0-0x00df] [ 0.364768] pnp 00:02: [dma 4] [ 0.364779] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.364784] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.364794] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.364849] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.364861] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.364868] pnp 00:05: [io 0x002e-0x002f] [ 0.364869] pnp 00:05: [io 0x004e-0x004f] [ 0.364870] pnp 00:05: [io 0x0061] [ 0.364871] pnp 00:05: [io 0x0063] [ 0.364872] pnp 00:05: [io 0x0065] [ 0.364873] pnp 00:05: [io 0x0067] [ 0.364874] pnp 00:05: [io 0x0070] [ 0.364875] pnp 00:05: [io 0x0080] [ 0.364876] pnp 00:05: [io 0x0092] [ 0.364877] pnp 00:05: [io 0x00b2-0x00b3] [ 0.364878] pnp 00:05: [io 0x0680-0x069f] [ 0.364879] pnp 00:05: [io 0x1000-0x100f] [ 0.364880] pnp 00:05: [io 0xffff] [ 0.364881] pnp 00:05: [io 0xffff] [ 0.364882] pnp 00:05: [io 0x0400-0x0453] [ 0.364883] pnp 00:05: [io 0x0458-0x047f] [ 0.364884] pnp 00:05: [io 0x0500-0x057f] [ 0.364885] pnp 00:05: [io 0x164e-0x164f] [ 0.364905] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.364906] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.364908] system 00:05: [io 0xffff] has been reserved [ 0.364909] system 00:05: [io 0xffff] has been reserved [ 0.364910] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.364911] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.364912] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.364914] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.364915] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.364920] pnp 00:06: [io 0x0070-0x0077] [ 0.364928] pnp 00:06: [irq 8] [ 0.364939] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.364955] pnp 00:07: [io 0x0454-0x0457] [ 0.364973] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.364975] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.365029] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.365031] pnp 00:08: [io 0x0a30-0x0a3f] [ 0.365032] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.365033] pnp 00:08: [io 0x0250-0x025f] [ 0.365050] system 00:08: [io 0x0a30-0x0a3f] has been reserved [ 0.365051] system 00:08: [io 0x0250-0x025f] has been reserved [ 0.365053] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365089] pnp 00:09: [io 0x0010-0x001f] [ 0.365090] pnp 00:09: [io 0x0022-0x003f] [ 0.365091] pnp 00:09: [io 0x0044-0x005f] [ 0.365092] pnp 00:09: [io 0x0062-0x0063] [ 0.365093] pnp 00:09: [io 0x0065-0x006f] [ 0.365094] pnp 00:09: [io 0x0072-0x007f] [ 0.365095] pnp 00:09: [io 0x0080] [ 0.365096] pnp 00:09: [io 0x0084-0x0086] [ 0.365097] pnp 00:09: [io 0x0088] [ 0.365098] pnp 00:09: [io 0x008c-0x008e] [ 0.365099] pnp 00:09: [io 0x0090-0x009f] [ 0.365100] pnp 00:09: [io 0x00a2-0x00bf] [ 0.365101] pnp 00:09: [io 0x00e0-0x00ef] [ 0.365102] pnp 00:09: [io 0x04d0-0x04d1] [ 0.365122] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.365123] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365129] pnp 00:0a: [io 0x00f0-0x00ff] [ 0.365136] pnp 00:0a: [irq 13] [ 0.365148] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.365324] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff] [ 0.365325] pnp 00:0b: [mem 0xfed10000-0xfed17fff] [ 0.365326] pnp 00:0b: [mem 0xfed18000-0xfed18fff] [ 0.365327] pnp 00:0b: [mem 0xfed19000-0xfed19fff] [ 0.365328] pnp 00:0b: [mem 0xf8000000-0xfbffffff] [ 0.365329] pnp 00:0b: [mem 0xfed20000-0xfed3ffff] [ 0.365330] pnp 00:0b: [mem 0xfed90000-0xfed93fff] [ 0.365331] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] [ 0.365332] pnp 00:0b: [mem 0xff000000-0xffffffff] [ 0.365333] pnp 00:0b: [mem 0xfee00000-0xfeefffff] [ 0.365334] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff] [ 0.365366] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.365367] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.365368] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.365370] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.365371] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.365372] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.365373] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.365375] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.365376] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.365377] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.365378] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.365380] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365487] pnp 00:0c: [mem 0x20000000-0x201fffff] [ 0.365488] pnp 00:0c: [mem 0x40004000-0x40004fff] [ 0.365520] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 0.365522] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved [ 0.365523] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.365538] pnp: PnP ACPI: found 13 devices [ 0.365538] ACPI: ACPI bus type pnp unregistered [ 0.400849] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.400853] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.400868] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.400869] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.400873] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.400893] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.400895] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.400900] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.400931] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.400932] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.400933] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.400934] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.400935] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.400937] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.400938] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.400939] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.400940] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.400941] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 0.400942] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.400944] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.400945] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.400946] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.400961] NET: Registered protocol family 2 [ 0.401043] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.401165] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.401219] TCP: Hash tables configured (established 131072 bind 65536) [ 0.401225] TCP: reno registered [ 0.401226] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.401229] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.401257] NET: Registered protocol family 1 [ 0.401263] pci 0000:00:02.0: Boot video device [ 0.434304] PCI: CLS 64 bytes, default 64 [ 0.434343] Unpacking initramfs... [ 0.734938] Freeing initrd memory: 25872k freed [ 0.737441] audit: initializing netlink socket (disabled) [ 0.737449] type=2000 audit(1350225418.636:1): initialized [ 0.748189] bounce pool size: 64 pages [ 0.748191] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.749007] VFS: Disk quotas dquot_6.5.2 [ 0.749033] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.749165] msgmni has been set to 1698 [ 0.749283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.749298] io scheduler noop registered [ 0.749298] io scheduler deadline registered [ 0.749302] io scheduler cfq registered (default) [ 0.749363] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.749546] intel_idle: MWAIT substates: 0x1120 [ 0.749547] intel_idle: v0.4 model 0x3A [ 0.749548] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.752282] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.752654] Non-volatile memory driver v1.3 [ 0.752655] Linux agpgart interface v0.103 [ 0.752727] ahci 0000:00:1f.2: version 3.0 [ 0.752762] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.752784] ahci: SSS flag set, parallel bus scan disabled [ 0.763356] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode [ 0.763360] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.763369] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.776876] scsi0 : ahci [ 0.776912] scsi1 : ahci [ 0.776941] scsi2 : ahci [ 0.776969] scsi3 : ahci [ 0.776998] scsi4 : ahci [ 0.777026] scsi5 : ahci [ 0.777048] ata1: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32100 irq 41 [ 0.777051] ata2: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32180 irq 41 [ 0.777052] ata3: DUMMY [ 0.777052] ata4: DUMMY [ 0.777053] ata5: DUMMY [ 0.777055] ata6: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32380 irq 41 [ 0.777093] libphy: Fixed MDIO Bus: probed [ 0.777094] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.777111] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.777114] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.777117] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.781018] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.781024] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 0.781035] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d34000 [ 0.789930] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.789950] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.789953] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.789955] usb usb1: Product: EHCI Host Controller [ 0.789957] usb usb1: Manufacturer: Linux 3.6.2 ehci_hcd [ 0.789959] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.790035] hub 1-0:1.0: USB hub found [ 0.790037] hub 1-0:1.0: 2 ports detected [ 0.790082] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.790085] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.790087] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.793981] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.793987] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 0.793997] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d33000 [ 0.803224] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.803237] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.803240] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.803242] usb usb2: Product: EHCI Host Controller [ 0.803244] usb usb2: Manufacturer: Linux 3.6.2 ehci_hcd [ 0.803246] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.803314] hub 2-0:1.0: USB hub found [ 0.803315] hub 2-0:1.0: 2 ports detected [ 0.803348] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.803355] uhci_hcd: USB Universal Host Controller Interface driver [ 0.803362] Initializing USB Mass Storage driver... [ 0.803371] usbcore: registered new interface driver usb-storage [ 0.803372] USB Mass Storage support registered. [ 0.803375] usbcore: registered new interface driver ums-alauda [ 0.803378] usbcore: registered new interface driver ums-cypress [ 0.803382] usbcore: registered new interface driver ums-datafab [ 0.803385] usbcore: registered new interface driver ums-freecom [ 0.803388] usbcore: registered new interface driver ums-isd200 [ 0.803391] usbcore: registered new interface driver ums-jumpshot [ 0.803394] usbcore: registered new interface driver ums-karma [ 0.803397] usbcore: registered new interface driver ums-onetouch [ 0.803400] usbcore: registered new interface driver ums-sddr09 [ 0.803403] usbcore: registered new interface driver ums-sddr55 [ 0.803406] usbcore: registered new interface driver ums-usbat [ 0.803428] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.805990] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.805996] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.806043] mousedev: PS/2 mouse device common for all mice [ 0.806099] rtc_cmos 00:06: RTC can wake from S4 [ 0.806202] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.806231] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.806268] cpuidle: using governor ladder [ 0.806355] usbcore: registered new interface driver usbhid [ 0.806355] usbhid: USB HID core driver [ 0.806435] ashmem: initialized [ 0.806515] TCP: cubic registered [ 0.806576] NET: Registered protocol family 10 [ 0.806668] lib80211: common routines for IEEE802.11 drivers [ 0.806669] lib80211_crypt: registered algorithm 'NULL' [ 0.806675] Key type dns_resolver registered [ 0.806677] Key type ceph registered [ 0.806681] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 0.806809] Using IPI No-Shortcut mode [ 0.806913] registered taskstats version 1 [ 0.807216] Magic number: 0:143:637 [ 0.807292] rtc_cmos 00:06: setting system clock to 2012-10-14 14:36:59 UTC (1350225419) [ 1.095746] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.095752] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.104985] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.104990] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.104994] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.107753] ata1.00: ATAPI: HL-DT-ST BDDVDRW UH12LS29, 1.00, max UDMA/133 [ 1.112793] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.112798] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.112801] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.115545] ata1.00: configured for UDMA/133 [ 1.124563] scsi 0:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12LS29 1.00 PQ: 0 ANSI: 5 [ 1.219072] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.219076] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.219349] hub 1-1:1.0: USB hub found [ 1.219442] hub 1-1:1.0: 6 ports detected [ 1.325071] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.441416] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.442850] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.442856] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.442859] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.448417] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.448421] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.448692] hub 2-1:1.0: USB hub found [ 1.448787] hub 2-1:1.0: 8 ports detected [ 1.453230] ata2.00: ATA-9: INTEL SSDSC2CW060A3, 400i, max UDMA/133 [ 1.453233] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.462747] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.462752] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.462756] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.473132] ata2.00: configured for UDMA/133 [ 1.473310] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CW06 400i PQ: 0 ANSI: 5 [ 1.124802] ACPI: Invalid Power Resource to register! [ 1.473485] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.473683] sd 1:0:0:0: [sda] Write Protect is off [ 1.473686] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.473798] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.474517] sda: sda1 sda2 sda3 sda4 [ 1.474855] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.514627] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd [ 1.601158] usb 1-1.2: New USB device found, idVendor=0846, idProduct=9011 [ 1.601163] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.601165] usb 1-1.2: Product: Remote Download Wireless Adapter [ 1.601167] usb 1-1.2: Manufacturer: Broadcom [ 1.601170] usb 1-1.2: SerialNumber: 0 [ 1.714055] usb 2-1.6: new full-speed USB device number 3 using ehci_hcd [ 1.737228] tsc: Refined TSC clocksource calibration: 3392.302 MHz [ 1.737234] Switching to clocksource tsc [ 1.790419] ata6: SATA link down (SStatus 0 SControl 300) [ 1.790556] Freeing unused kernel memory: 452k freed [ 1.800292] usb 2-1.6: New USB device found, idVendor=19ff, idProduct=0231 [ 1.800294] usb 2-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.800295] usb 2-1.6: Product: Dynex wireless combo [ 1.812704] emc: device handler registered [ 1.813598] rdac: device handler registered [ 1.814555] alua: device handler registered [ 1.815408] hp_sw: device handler registered [ 1.817953] udevd[113]: starting version 182 [ 1.822988] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.823012] ACPI: Power Button [PWRB] [ 1.823046] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.823060] ACPI: Power Button [PWRF] [ 1.829105] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.829112] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.829116] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.829198] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.829204] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d20000 [ 1.829246] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 1.829293] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.829294] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.829295] usb usb3: Product: xHCI Host Controller [ 1.829296] usb usb3: Manufacturer: Linux 3.6.2 xhci_hcd [ 1.829297] usb usb3: SerialNumber: 0000:00:14.0 [ 1.831676] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input2 [ 1.831802] hid-generic 0003:19FF:0231.0001: input,hidraw0: USB HID v1.11 Keyboard [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input0 [ 1.831921] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input3 [ 1.831997] hid-generic 0003:19FF:0231.0002: input,hidraw1: USB HID v1.11 Mouse [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input1 [ 1.832545] [drm] Initialized drm 1.1.0 20060810 [ 1.833032] drm_kms_helper: Unknown parameter `edid' [ 1.843701] xHCI xhci_add_endpoint called for root hub [ 1.843703] xHCI xhci_check_bandwidth called for root hub [ 1.843727] hub 3-0:1.0: USB hub found [ 1.843736] hub 3-0:1.0: 4 ports detected [ 1.843761] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.843762] ACPI: Thermal Zone [TZ00] (28 C) [ 1.843779] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.843781] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.843797] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.843799] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.843800] usb usb4: Product: xHCI Host Controller [ 1.843801] usb usb4: Manufacturer: Linux 3.6.2 xhci_hcd [ 1.843802] usb usb4: SerialNumber: 0000:00:14.0 [ 1.843877] xHCI xhci_add_endpoint called for root hub [ 1.843878] xHCI xhci_check_bandwidth called for root hub [ 1.843894] hub 4-0:1.0: USB hub found [ 1.843900] hub 4-0:1.0: 4 ports detected [ 1.843910] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.843911] ACPI: Thermal Zone [TZ01] (30 C) [ 1.843957] ACPI: Fan [FAN0] (off) [ 1.843983] ACPI: Fan [FAN1] (off) [ 1.844003] ACPI: Fan [FAN2] (off) [ 1.844023] ACPI: Fan [FAN3] (off) [ 1.844042] ACPI: Fan [FAN4] (off) [ 1.867388] i915_pci_probe: Entered [ 1.867390] dropping agp requirement [ 1.867391] force-disabling agp on gen 7, is_ivybridge 1 [ 1.867559] pci 0000:00:00.0: Intel Ivybridge Chipset [ 1.867591] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.868147] pci 0000:00:00.0: detected 65536K stolen memory [ 1.868303] i915 0000:00:02.0: setting latency timer to 64 [ 1.473507] ACPI: Invalid Power Resource to register! [ 1.868483] [drm:intel_detect_pch], Found PatherPoint PCH [ 1.868835] [drm:intel_gt_init], Using MT version of forcewake [ 1.868906] [drm:intel_opregion_setup], graphic opregion physical addr: 0xda407018 [ 1.868910] [drm:intel_opregion_setup], SWSCI supported [ 1.868928] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 1.868932] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.868933] [drm] Driver supports precise vblank timestamp query. [ 1.868934] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 1.868935] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd [ 1.868937] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 [ 1.868938] [drm:parse_general_definitions], crt_ddc_bus_pin: 5 [ 1.868940] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.868941] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.868943] [drm:parse_lfp_panel_data], VBT initial LVDS value 300 [ 1.868945] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 1.868946] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.868948] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.868993] [drm:intel_modeset_init], 3 display pipes available. [ 1.869003] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.869310] [drm:intel_lvds_init], LVDS is not present in VBT [ 1.869331] [drm:intel_crt_init], pch crt adpa set to 0x80f40010 [ 1.869748] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 1.869750] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 1.869790] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 1.872396] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.872397] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.874992] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.874993] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.875046] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 1.877652] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.877653] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.880249] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.880249] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.880273] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 1.882869] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.882870] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.885461] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.885462] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.885493] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [ 1.885496] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 1.910283] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 1.910286] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 1.910287] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 1.910288] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 1.910728] [drm:ironlake_crtc_dpms], crtc 2/2 dpms off [ 1.910729] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C [ 1.910730] [drm:i915_get_vblank_timestamp], crtc 2 is disabled [ 1.910731] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C [ 1.911171] [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0 has_pch_edp 0 has_cpu_edp 0 has_ck505 0 [ 1.911176] [drm:ironlake_init_pch_refclk], Disabling SSC entirely [ 1.935473] [drm:init_status_page], render ring hws offset: 0x00000000 [ 1.935823] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 1.935863] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 1.935909] [drm:create_default_context], Default HW context loaded [ 1.935910] [drm:i915_gem_context_init], HW context support initialized [ 1.935967] [drm:intel_enable_rc6], RC6 and deep RC6 enabled [ 1.935968] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 2.053056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 2.053060] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40010 [ 2.066294] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 2.066299] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.066724] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.066725] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.066727] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 2.066728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 2.067145] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.067146] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 2.067147] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 2.069747] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.078861] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.085510] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.089556] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 2.089562] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 2.089565] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 2.096206] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.096212] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 2.096215] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 2.096218] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 2.222511] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.222582] Raw EDID: [ 2.222627] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.222679] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.222729] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.222781] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.222830] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.222881] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.222930] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.222982] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.335522] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.335615] Raw EDID: [ 2.335684] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.335756] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.335830] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.335904] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.335978] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.336052] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.336125] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.336199] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.448539] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.448656] Raw EDID: [ 2.448725] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.448799] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.448874] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.448944] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.449019] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.449092] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.449165] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.449239] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.561546] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.561663] Raw EDID: [ 2.561731] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.561805] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.561879] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.561952] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.562026] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.562099] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.562174] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.562248] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.562322] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 2.562324] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 2.562325] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 2.564933] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.574115] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.580762] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.584803] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 2.584809] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 2.584813] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 2.587415] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.594058] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.600705] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.604746] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 2.604752] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 2.604755] No connectors reported connected with modes [ 2.604757] [drm:drm_setup_crtcs], [ 2.604759] [drm:drm_enable_connectors], connector 9 enabled? no [ 2.604762] [drm:drm_enable_connectors], connector 12 enabled? no [ 2.604764] [drm:drm_enable_connectors], connector 15 enabled? no [ 2.604765] [drm:drm_enable_connectors], connector 18 enabled? no [ 2.604767] [drm:drm_enable_connectors], connector 20 enabled? no [ 2.604769] [drm:drm_enable_connectors], connector 21 enabled? no [ 2.604771] [drm:drm_enable_connectors], connector 23 enabled? no [ 2.604781] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 2.604783] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.607052] [drm:intelfb_create], allocated 1024x768 fb: 0x00073000, bo f4db6f00 [ 2.607139] fbcon: inteldrmfb (fb0) is primary device [ 2.607511] [drm:drm_crtc_helper_set_config], [ 2.607512] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 2.607534] [drm:drm_crtc_helper_set_config], [ 2.607535] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 2.607554] [drm:drm_crtc_helper_set_config], [ 2.607555] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 2.609142] Console: switching to colour frame buffer device 128x48 [ 2.610708] fb0: inteldrmfb frame buffer device [ 2.610709] drm: registered panic notifier [ 2.625008] acpi device:4b: registered as cooling_device9 [ 2.625106] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.625135] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 2.625166] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.640039] [drm:i915_driver_open], [ 2.640050] [drm:drm_crtc_helper_set_config], [ 2.640051] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 2.640074] [drm:drm_crtc_helper_set_config], [ 2.640075] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 2.640095] [drm:drm_crtc_helper_set_config], [ 2.640096] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 2.640122] [drm:i915_driver_open], [ 2.640126] [drm:drm_crtc_helper_set_config], [ 2.640127] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 2.640149] [drm:drm_crtc_helper_set_config], [ 2.640150] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 2.640169] [drm:drm_crtc_helper_set_config], [ 2.640170] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 2.640194] [drm:i915_driver_open], [ 2.640219] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7] [ 2.640222] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7] [ 2.640226] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 2.640228] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 2.640233] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 2.640234] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.640647] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.640648] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.640649] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 2.640651] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 2.640652] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 2.640654] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 2.640655] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.641069] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.641069] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.641070] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 2.641073] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 2.641074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 2.641486] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.641487] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 2.641488] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 2.641489] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 2.641903] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.641904] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 2.641906] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 2.641907] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 2.644516] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.653865] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.663838] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.671207] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 2.671212] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 2.671217] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 2.671219] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 2.673828] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.680476] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.687126] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.691166] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 2.691172] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 2.691183] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 2.691186] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 2.697824] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.697830] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 2.697834] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 2.697841] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 2.697852] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 2.704468] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.704473] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 2.704477] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 2.704487] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 2.704498] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 2.830778] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.830826] Raw EDID: [ 2.830836] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.830856] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.830876] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.830897] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.830917] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.830938] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.830958] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.830978] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.943788] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.943835] Raw EDID: [ 2.943845] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.943865] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.943886] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.943906] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.943926] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.943947] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.943967] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.943987] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.056797] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.056846] Raw EDID: [ 3.056856] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.056876] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.057307] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.057736] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.058149] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.058546] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.058937] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.059312] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.169808] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.170230] Raw EDID: [ 3.170635] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.171066] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.171500] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.171934] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.172366] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.172782] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.173184] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.173582] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.173964] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 3.173965] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 3.173969] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 3.173971] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 3.299436] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.299864] Raw EDID: [ 3.300271] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.300708] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.301145] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.301583] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.302019] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.302454] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.302873] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.303272] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.415768] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.416199] Raw EDID: [ 3.416609] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.417045] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.417484] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.417921] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.418357] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.418795] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.419216] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.419616] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.532104] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.532535] Raw EDID: [ 3.532944] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.533382] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.533822] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.534261] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.534698] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.535138] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.535561] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.535959] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.648438] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.648868] Raw EDID: [ 3.649276] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.649712] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.650149] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.650584] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.651018] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.651454] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.651870] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.652262] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.652642] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 3.652644] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 3.652649] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 3.652650] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 3.655260] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.664326] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.670971] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.675021] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.675027] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 3.675035] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 3.675038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 3.677639] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.684266] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.690915] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.694965] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.694972] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 3.694982] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 3.694986] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 3.697605] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.704214] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.710863] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.714909] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.714915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 3.714923] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 3.714926] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 3.717525] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.724155] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.730810] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.734852] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.734858] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 3.734897] [drm:drm_crtc_helper_set_config], [ 3.734898] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 3.734921] [drm:drm_crtc_helper_set_config], [ 3.734922] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 3.734942] [drm:drm_crtc_helper_set_config], [ 3.734942] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 4.275663] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 4.289841] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr [ 4.568222] systemd-readahead-replay[270]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day. [ 4.966624] udevd[302]: starting version 182 [ 5.035757] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12 [ 5.036937] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12 [ 5.037146] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12 [ 5.037366] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12 [ 5.037641] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 5.159360] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr [ 5.202946] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 5.435540] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.435940] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.438844] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251) [ 5.438849] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.438851] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251) [ 5.438853] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.438854] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.439034] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 5.439035] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 5.439057] e1000e 0000:00:19.0: setting latency timer to 64 [ 5.439099] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.439125] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 5.444846] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 5.444869] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.447672] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 5.457476] kvm: disabled by bios [ 5.462373] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.462376] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.462515] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 5.473886] kvm: disabled by bios [ 5.617681] Adding 4193276k swap on /dev/sda3. Priority:-1 extents:1 across:4193276k SS [ 5.693802] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) e8:40:f2:05:f1:85 [ 5.693804] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 5.693853] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 5.693906] ACPI Warning: 0x0000f040-0x0000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251) [ 5.693910] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.725630] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 6.592840] [drm:i915_driver_open], [ 6.592862] [drm:drm_crtc_helper_set_config], [ 6.592863] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 6.592889] [drm:drm_crtc_helper_set_config], [ 6.592890] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 6.592910] [drm:drm_crtc_helper_set_config], [ 6.592910] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 6.592946] [drm:i915_driver_open], [ 6.593080] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7] [ 6.593083] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7] [ 6.593111] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 6.593113] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 6.593119] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 6.593120] [drm:intel_crt_detect], CRT not detected via hotplug [ 6.593545] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 6.593546] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 6.593548] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 6.593550] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 6.593551] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 6.593556] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 6.593557] [drm:intel_crt_detect], CRT not detected via hotplug [ 6.593972] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 6.593973] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 6.593974] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 6.593991] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 6.593992] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 6.594421] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 6.594422] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 6.594424] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 6.594425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 6.594848] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 6.594849] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 6.594858] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 6.594860] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 6.597463] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 6.605934] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 6.612557] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 6.619930] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 6.619934] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 6.619940] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 6.619941] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 6.622549] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 6.629177] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 6.635827] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 6.639866] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 6.639869] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 6.639905] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 6.639907] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 6.646539] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 6.646545] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 6.646549] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 6.646558] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 6.646561] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 6.653193] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 6.653199] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 6.653202] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 6.653245] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 6.653246] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 6.779481] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.779482] Raw EDID: [ 6.779483] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.779484] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.779485] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.779485] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.779486] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.779487] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.779487] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.779488] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.789553] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 6.892502] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.892505] Raw EDID: [ 6.892507] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.892508] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.892510] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.892511] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.892513] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.892514] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.892515] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.892517] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.892562] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 6.892647] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.008817] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.008819] Raw EDID: [ 7.008821] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.008822] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.008822] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.008823] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.008824] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.008824] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.008825] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.008826] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.117033] RPC: Registered named UNIX socket transport module. [ 7.117035] RPC: Registered udp transport module. [ 7.117035] RPC: Registered tcp transport module. [ 7.117036] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.119227] FS-Cache: Loaded [ 7.121865] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.121866] Raw EDID: [ 7.121868] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.121868] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.121869] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.121870] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.121870] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.121871] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.121872] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.121872] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.121875] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 7.121877] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 7.121886] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 7.121888] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 7.121911] FS-Cache: Netfs 'nfs' registered for caching [ 7.261462] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.261465] Raw EDID: [ 7.261468] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.261469] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.261471] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.261472] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.261474] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.261483] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.261484] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.261485] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.374451] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.374454] Raw EDID: [ 7.374455] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.374456] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.374457] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.374457] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.374458] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.374459] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.374459] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.374460] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.487450] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.487452] Raw EDID: [ 7.487453] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.487454] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.487455] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.487455] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.487456] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.487457] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.487458] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.487458] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.607130] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.607133] Raw EDID: [ 7.607135] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.607137] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.607138] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.607140] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.607141] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.607143] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.607144] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.607154] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.607157] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 7.607159] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 7.607197] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 7.607199] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 7.609805] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.616370] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.623018] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.627053] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.627056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 7.627061] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 7.627062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 7.629666] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.636316] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.642961] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.646996] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.646999] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 7.647024] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 7.647026] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 7.649629] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.656259] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.662904] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.666951] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.666957] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 7.666966] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 7.666969] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 7.669586] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.676201] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.682847] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.686882] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.686885] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 7.686923] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 7.686925] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 7.686930] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 7.686932] [drm:intel_crt_detect], CRT not detected via hotplug [ 7.687355] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 7.687356] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 7.687357] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 7.687359] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 7.687360] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 7.687364] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 7.687365] [drm:intel_crt_detect], CRT not detected via hotplug [ 7.687778] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 7.687779] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 7.687780] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 7.687797] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 7.687799] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 7.688216] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 7.688218] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 7.688219] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 7.688220] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 7.688635] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 7.688636] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 7.688646] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 7.688648] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 7.691257] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.699466] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.706116] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.710160] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.710166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 7.710175] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 7.710178] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 7.712798] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.719409] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.726059] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.730102] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.730108] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 7.730147] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 7.730149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 7.736757] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 7.736763] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 7.736767] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 7.736783] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 7.736785] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 7.743409] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 7.743414] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 7.743418] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 7.743451] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 7.743452] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 7.869710] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.869713] Raw EDID: [ 7.869715] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.869717] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.869718] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.869720] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.869721] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.869722] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.869724] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.869725] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.982721] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.982724] Raw EDID: [ 7.982726] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.982728] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.982729] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.982730] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.982732] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.982733] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.982735] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.982736] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.095730] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.095733] Raw EDID: [ 8.095734] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.095736] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.095737] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.095739] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.095740] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.095742] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.095743] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.095744] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.208746] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.208748] Raw EDID: [ 8.208750] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.208752] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.208753] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.208755] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.208756] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.208758] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.208768] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.208768] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.208770] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 8.208772] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 8.208776] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 8.208777] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 8.335050] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.335053] Raw EDID: [ 8.335055] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.335056] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.335058] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.335059] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.335061] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.335062] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.335063] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.335065] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.388617] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 8.388620] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 8.388652] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.448063] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.448066] Raw EDID: [ 8.448068] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.448070] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.448071] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.448073] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.448074] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.448075] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.448085] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.448086] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.561073] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.561076] Raw EDID: [ 8.561078] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.561080] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.561081] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.561082] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.561084] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.561085] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.561087] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.561088] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.674083] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.674086] Raw EDID: [ 8.674088] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.674090] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.674091] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.674093] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.674094] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.674095] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.674106] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.674106] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.674108] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 8.674109] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 8.674133] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 8.674134] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 8.676741] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.683332] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.689975] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.694021] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 8.694027] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 8.694035] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 8.694038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 8.696650] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.703275] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.709924] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.713964] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 8.713970] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 8.714006] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 8.714008] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 8.716614] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.723220] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.729867] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.733906] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 8.733913] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 8.733921] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 8.733923] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 8.736537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.743161] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.749808] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.753850] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 8.753856] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 8.761383] [drm:drm_mode_setcrtc], [CRTC:3] [ 8.761385] [drm:drm_crtc_helper_set_config], [ 8.761386] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 8.761411] [drm:drm_mode_setcrtc], [CRTC:5] [ 8.761412] [drm:drm_crtc_helper_set_config], [ 8.761412] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 8.761433] [drm:drm_mode_setcrtc], [CRTC:7] [ 8.761433] [drm:drm_crtc_helper_set_config], [ 8.761434] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 9.097333] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 9.097337] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 9.097343] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 9.097344] [drm:intel_crt_detect], CRT not detected via hotplug [ 9.097767] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 9.097768] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 9.097770] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 9.097773] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 9.097774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 9.097779] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 9.097780] [drm:intel_crt_detect], CRT not detected via hotplug [ 9.098194] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 9.098195] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 9.098196] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 9.098201] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 9.098203] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 9.098623] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 9.098624] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 9.098625] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 9.098626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 9.099049] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 9.099050] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 9.099052] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 9.099053] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 9.101656] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.108780] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.115407] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.119465] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.119472] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 9.119487] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 9.119498] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 9.122097] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.128703] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.135350] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.139401] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.139407] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 9.139435] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 9.139437] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 9.146069] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 9.146075] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.146079] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 9.146087] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 9.146090] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 9.152714] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 9.152720] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.152724] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 9.152741] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 9.152743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 9.279021] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.279024] Raw EDID: [ 9.279026] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.279028] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.279029] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.279031] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.279032] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.279034] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.279044] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.279044] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.392030] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.392033] Raw EDID: [ 9.392035] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.392036] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.392038] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.392039] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.392041] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.392042] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.392043] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.392053] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505040] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.505043] Raw EDID: [ 9.505045] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.505047] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505048] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505050] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505051] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505053] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505054] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505064] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.618053] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.618056] Raw EDID: [ 9.618058] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.618060] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.618061] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.618063] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.618064] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.618065] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.618075] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.618076] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.618078] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 9.618080] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 9.618087] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 9.618088] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 9.744357] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.744360] Raw EDID: [ 9.744362] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.744363] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.744365] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.744366] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.744368] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.744369] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.744370] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.744380] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.857368] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.857371] Raw EDID: [ 9.857373] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.857375] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.857376] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.857378] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.857379] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.857381] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.857382] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.857392] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.973703] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.973706] Raw EDID: [ 9.973708] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.973709] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.973711] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.973712] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.973713] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.973715] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.973725] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.973725] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.086714] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.086717] Raw EDID: [ 10.086719] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.086721] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.086722] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.086724] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.086725] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.086726] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.086736] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.086737] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.086739] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 10.086740] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 10.086751] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 10.086752] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 10.089365] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.095952] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.102599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.106649] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 10.106656] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 10.106671] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 10.106681] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 10.109287] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.115915] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.122541] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.126589] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 10.126595] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 10.126616] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 10.126628] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 10.129230] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.135837] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.142484] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.146536] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 10.146542] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 10.146565] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 10.146567] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 10.149173] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.155814] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.162442] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.166486] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 10.166493] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 10.167592] [drm:drm_mode_addfb], [FB:26] [ 10.169376] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 10.169379] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 10.169384] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 10.169386] [drm:intel_crt_detect], CRT not detected via hotplug [ 10.169805] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 10.169806] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 10.169808] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 10.169809] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 10.169810] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 10.169812] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 10.169813] [drm:intel_crt_detect], CRT not detected via hotplug [ 10.170232] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 10.170233] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 10.170233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 10.170237] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 10.170239] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 10.170656] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 10.170657] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 10.170658] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 10.170659] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 10.171083] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 10.171084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 10.171087] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 10.171088] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 10.173686] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.182370] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.189018] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.193089] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 10.193096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 10.193110] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 10.193122] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 10.195730] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.202313] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.208961] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.213009] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 10.213015] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 10.213043] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 10.213044] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 10.219663] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 10.219669] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 10.219672] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 10.219680] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 10.219690] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 10.226312] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 10.226318] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 10.226321] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 10.226339] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 10.226341] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 10.352636] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.352639] Raw EDID: [ 10.352641] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.352643] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.352645] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.352646] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.352647] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.352649] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.352650] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.352652] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.468955] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.468958] Raw EDID: [ 10.468960] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.468961] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.468963] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.468964] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.468966] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.468976] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.468976] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.468977] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.581965] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.581968] Raw EDID: [ 10.581970] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.581971] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.581973] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.581974] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.581976] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.581977] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.581979] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.581989] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.694975] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.694978] Raw EDID: [ 10.694980] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.694981] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.694983] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.694984] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.694986] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.694987] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.694997] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.694997] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.695000] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 10.695001] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 10.695009] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 10.695010] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 10.821282] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.821285] Raw EDID: [ 10.821287] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.821288] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.821290] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.821291] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.821293] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.821294] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.821304] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.821305] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.934291] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.934294] Raw EDID: [ 10.934296] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.934298] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.934299] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.934301] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.934302] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.934304] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.934305] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.934315] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.047306] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.047309] Raw EDID: [ 11.047311] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.047312] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.047314] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.047315] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.047317] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.047318] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.047319] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.047329] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.160313] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.160316] Raw EDID: [ 11.160318] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.160320] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.160321] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.160323] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.160324] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.160325] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.160335] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.160336] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.160337] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 11.160339] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 11.160349] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.160350] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 11.162955] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.169561] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.176209] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.180250] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.180256] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 11.180279] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.180281] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 11.182877] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.189506] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.196152] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.200192] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.200198] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 11.200225] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 11.200226] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 11.202836] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.209448] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.216094] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.220135] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.220141] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 11.220163] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 11.220165] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 11.222763] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.229390] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.236037] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.240079] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.240085] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 11.249339] ksplashx[1645]: segfault at b7200fc4 ip 08056cac sp bff54f00 error 4 in ksplashx[8048000+1c000] [ 11.758474] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.764523] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.771172] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.775190] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.777836] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.784446] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.791091] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.795131] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.797762] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.804388] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.811036] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.815085] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.815539] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 11.821739] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 11.821742] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 11.902921] [drm:i915_driver_open], [ 11.954696] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.954699] Raw EDID: [ 11.954702] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.954703] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.954705] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.954706] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.954708] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.954709] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.954711] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.954712] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.067717] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.067720] Raw EDID: [ 12.067722] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.067724] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.067725] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.067727] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.067728] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.067729] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.067731] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.067732] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.180731] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.180734] Raw EDID: [ 12.180736] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.180737] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.180739] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.180740] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.180742] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.180743] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.180745] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.180746] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.293738] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.293741] Raw EDID: [ 12.293743] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.293745] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.293746] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.293748] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.293749] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.293750] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.293752] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.293753] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.293765] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 12.293808] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 12.293810] [drm:intel_crt_detect], CRT not detected via hotplug [ 12.294224] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 12.294225] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 12.296671] [drm:i915_driver_open], [ 12.311210] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 12.311214] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 12.311220] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 12.311221] [drm:intel_crt_detect], CRT not detected via hotplug [ 12.311640] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 12.311642] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 12.311643] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 12.311646] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 12.311647] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 12.311651] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 12.311652] [drm:intel_crt_detect], CRT not detected via hotplug [ 12.312061] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 12.312061] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 12.312062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 12.312067] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 12.312068] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 12.312482] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 12.312483] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 12.312485] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 12.312486] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 12.312903] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 12.312904] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 12.312907] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 12.312908] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 12.315505] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.322939] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.329570] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.333603] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 12.333607] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 12.333616] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 12.333618] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 12.336219] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.346161] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.352574] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr,commit=0 [ 12.352787] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.355139] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0 [ 12.356870] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 12.356874] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 12.356893] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 12.356895] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 12.363516] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 12.363519] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 12.363520] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 12.363524] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 12.363526] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 12.370170] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 12.370173] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 12.370174] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 12.370182] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 12.370183] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 12.496490] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.496493] Raw EDID: [ 12.496496] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.496497] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.496499] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.496500] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.496502] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.496503] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.496505] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.496506] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.616149] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.616153] Raw EDID: [ 12.616155] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.616157] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.616158] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.616159] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.616161] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.616162] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.616164] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.616174] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.729159] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.729162] Raw EDID: [ 12.729164] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.729165] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.729167] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.729168] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.729170] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.729171] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.729173] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.729174] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.842172] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.842175] Raw EDID: [ 12.842177] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.842178] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.842180] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.842181] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.842183] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.842184] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.842186] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.842196] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.842198] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 12.842201] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 12.842214] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 12.842216] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 12.968478] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.968481] Raw EDID: [ 12.968483] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.968485] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.968486] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.968488] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.968489] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.968491] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.968492] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.968502] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.081488] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.081491] Raw EDID: [ 13.081493] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.081494] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.081496] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.081497] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.081499] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.081500] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.081502] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.081511] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.194500] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.194503] Raw EDID: [ 13.194505] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.194507] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.194508] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.194510] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.194511] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.194513] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.194514] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.194524] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.307509] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.307512] Raw EDID: [ 13.307514] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.307516] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.307517] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.307519] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.307520] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.307522] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.307523] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.307533] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.307535] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 13.307536] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 13.307550] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 13.307552] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 13.310155] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.316761] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.323405] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.327447] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.327453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 13.327470] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 13.327482] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 13.330079] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.336704] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.343352] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.347389] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.347395] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 13.347425] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 13.347427] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 13.350037] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.356647] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.363295] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.367330] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.367337] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 13.367354] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 13.367357] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 13.369963] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.376569] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.383219] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.387274] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.387281] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 13.387333] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 13.387335] [drm:intel_crt_detect], CRT not detected via hotplug [ 13.387757] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 13.387759] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 13.387760] [drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2 [ 13.388177] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 13.388178] [drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2 [ 13.390782] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.399830] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.406483] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.410522] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.410525] [drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 2 to 2 [ 13.417170] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 13.417173] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 13.417174] [drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2 [ 13.546801] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.546803] Raw EDID: [ 13.546804] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.546805] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.546806] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.546807] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.546807] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.546808] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.546809] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.546809] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.659821] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.659823] Raw EDID: [ 13.659825] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.659825] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.659826] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.659827] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.659827] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.659828] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.659829] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.659829] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.772831] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.772833] Raw EDID: [ 13.772835] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.772835] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.772836] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.772837] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.772837] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.772838] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.772839] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.772839] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.889154] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.889156] Raw EDID: [ 13.889158] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.889159] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.889159] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.889160] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.889161] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.889161] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.889162] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.889163] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.889165] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 13.889167] [drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2 [ 13.891780] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.898407] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.905054] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.909101] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.909104] [drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 2 to 2 [ 13.911705] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.918351] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.924997] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.929042] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.929045] [drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2 [ 14.432762] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 14.432766] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 14.432772] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 14.432773] [drm:intel_crt_detect], CRT not detected via hotplug [ 14.433191] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 14.433192] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 14.433194] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 14.433196] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 14.433197] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 14.433202] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 14.433203] [drm:intel_crt_detect], CRT not detected via hotplug [ 14.433625] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 14.433626] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 14.433627] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 14.433632] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 14.433633] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 14.433999] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 14.434000] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 14.434002] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 14.434003] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 14.434375] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 14.434376] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 14.434379] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 14.434381] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 14.436983] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.443516] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.450160] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.454202] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 14.454206] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 14.454218] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 14.454220] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 14.456826] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.463454] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.470104] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 14.474148] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 14.474152] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 14.474169] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 14.474171] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 14.480802] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 14.480805] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 14.480807] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 14.480811] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 14.480812] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 14.487454] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 14.487457] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 14.487459] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 14.487467] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 14.487468] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 14.613778] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 14.613781] Raw EDID: [ 14.613784] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 14.613786] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.613787] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.613788] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.613799] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.613799] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.613800] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.613801] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.726784] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 14.726787] Raw EDID: [ 14.726789] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 14.726790] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.726792] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.726793] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.726795] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.726796] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.726797] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.726799] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.839794] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 14.839797] Raw EDID: [ 14.839799] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 14.839801] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.839802] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.839804] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.839805] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.839807] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.839808] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.839810] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.952806] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 14.952809] Raw EDID: [ 14.952811] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 14.952813] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.952814] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.952816] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.952817] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.952818] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.952820] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.952821] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 14.952833] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 14.952836] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 14.952849] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 14.952851] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 15.079115] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 15.079118] Raw EDID: [ 15.079120] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 15.079121] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.079123] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.079124] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.079125] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.079127] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.079137] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.079137] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.192125] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 15.192128] Raw EDID: [ 15.192130] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 15.192131] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.192133] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.192134] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.192135] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.192145] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.192146] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.192147] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.305135] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 15.305138] Raw EDID: [ 15.305140] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 15.305142] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.305143] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.305145] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.305146] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.305148] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.305157] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.305158] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.418146] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 15.418149] Raw EDID: [ 15.418151] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 15.418152] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.418154] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.418155] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.418156] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.418158] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.418167] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.418168] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.418170] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 15.418171] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 15.418185] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 15.418187] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 15.420795] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.427394] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.434047] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.438082] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 15.438088] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 15.438111] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 15.438112] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 15.440714] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.447322] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.457312] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.461358] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 15.461365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 15.461388] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 15.461390] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 15.463995] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.470607] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.477254] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.481293] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 15.481299] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 15.481321] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 15.481322] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 15.483924] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.490548] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.497194] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 15.501238] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 15.501244] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 22.836946] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 22.836952] [drm:intel_crt_detect], CRT not detected via hotplug [ 22.837386] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 22.837388] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 22.837389] [drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2 [ 22.837809] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 22.837810] [drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2 [ 22.840420] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 22.849510] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 22.856150] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 22.860202] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 22.860208] [drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 2 to 2 [ 22.866856] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 22.866862] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 22.866865] [drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2 [ 22.993159] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 22.993162] Raw EDID: [ 22.993164] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 22.993166] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.993167] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.993169] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.993170] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.993172] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.993173] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 22.993174] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.106175] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.106178] Raw EDID: [ 23.106180] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.106181] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.106183] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.106184] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.106186] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.106187] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.106189] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.106190] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.219187] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.219190] Raw EDID: [ 23.219192] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.219194] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.219195] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.219197] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.219198] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.219200] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.219201] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.219203] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.332184] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.332187] Raw EDID: [ 23.332189] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.332191] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.332192] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.332194] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.332195] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.332197] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.332198] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.332200] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.332212] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 23.332213] [drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2 [ 23.334820] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.341444] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.348090] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.352134] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 23.352139] [drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 2 to 2 [ 23.354739] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.361387] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.368035] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.372075] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 23.372081] [drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2 [ 258.638359] [drm:i915_driver_open], [ 258.739781] [drm:i915_driver_open], [ 293.188284] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 293.188300] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 293.188303] [drm:intel_crt_detect], CRT not detected via hotplug [ 293.188731] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 293.188732] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 293.188734] [drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2 [ 293.189153] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 293.189155] [drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2 [ 293.191753] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 293.203656] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 293.210304] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 293.214347] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 293.214350] [drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 2 to 2 [ 293.224323] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 293.224328] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 293.224331] [drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2 [ 293.353958] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 293.353961] Raw EDID: [ 293.353963] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 293.353965] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.353966] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.353968] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.353969] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.353971] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.353972] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.353974] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.480271] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 293.480274] Raw EDID: [ 293.480276] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 293.480278] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.480279] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.480281] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.480282] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.480284] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.480285] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.480287] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.596613] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 293.596616] Raw EDID: [ 293.596618] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 293.596619] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.596621] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.596622] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.596624] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.596625] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.596627] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.596636] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.712929] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 293.712930] Raw EDID: [ 293.712931] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 293.712932] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.712932] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.712933] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.712934] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.712934] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.712935] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.712936] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 293.712938] i915 0000:00:02.0: HDMI-A-3: EDID block 0 invalid. [ 293.712939] [drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2 [ 293.715544] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 293.722170] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 293.728818] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 293.732877] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 293.732883] [drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 2 to 2 [ 293.735486] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 293.742132] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 293.748779] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 293.752812] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 293.752818] [drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2 ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 18:57 ` Mark Hounschell @ 2012-10-14 20:40 ` Bruno Prémont 2012-10-15 9:58 ` Mark Hounschell 0 siblings, 1 reply; 25+ messages in thread From: Bruno Prémont @ 2012-10-14 20:40 UTC (permalink / raw) To: dmarkh; +Cc: markh, Intel Graphics Development, linux-kernel On Sun, 14 October 2012 Mark Hounschell <dmarkh@cfl.rr.com> wrote: > I gave it a try. I don't think it liked my kernel cmdline. dmesg attached. > There is a lot more in there now that nomodeset is gone and the debug is > turned on. > > # ls -al /lib/firmware/edid/lg42lb9df.edid > -rw-r--r-- 1 root root 1024 Oct 14 2012 /lib/firmware/edid/lg42lb9df.edid > > ## cat /proc/cmdline > root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 > noresume splash=silent quiet apm=off vga=normal drm.debug=0xe irqpoll > drm_kms_helper.edid_firmware=edid/lg42lb9df.edid > > > from attached dmesg: > 1.833032] drm_kms_helper: Unknown parameter `edid' As your drm drivers seem to all be built-in (according to kernel timings) you will have to build the EDID firmware into the kernel as well (see CONFIG_EXTRA_FIRMWARE), otherwise it probably can't be loaded (unless Linus' firmware loading patch is already in 3.6.2 and root filesystem/initrd is ready at that time). Did you set CONFIG_DRM_LOAD_EDID_FIRMWARE? If not, that may be the reason for unknown parameter `edid' error. But I saw I mis-remembered side of EDID blobs, they are just 128 bytes per block, not 512 (seems I was thinking disk sector sizes), thus you should just get 256 bytes output. Just truncating the file to 256 bytes will do. You may also change your .c file to have uint8_t firmware[] = { ... }; ... fwrite(firmware, sizeof(firmware), 1, fd); ... that way compiler gets numbers right :) Kernel code rejects edid with unexpected size! Thus it would have complained if it had tried to load it with a size of 1k. Bruno ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 20:40 ` Bruno Prémont @ 2012-10-15 9:58 ` Mark Hounschell 0 siblings, 0 replies; 25+ messages in thread From: Mark Hounschell @ 2012-10-15 9:58 UTC (permalink / raw) To: Bruno Prémont; +Cc: markh, linux-kernel, Intel Graphics Development On 10/14/2012 04:40 PM, Bruno Prémont wrote: > On Sun, 14 October 2012 Mark Hounschell <dmarkh@cfl.rr.com> wrote: >> I gave it a try. I don't think it liked my kernel cmdline. dmesg attached. >> There is a lot more in there now that nomodeset is gone and the debug is >> turned on. >> >> # ls -al /lib/firmware/edid/lg42lb9df.edid >> -rw-r--r-- 1 root root 1024 Oct 14 2012 /lib/firmware/edid/lg42lb9df.edid >> >> ## cat /proc/cmdline >> root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 >> noresume splash=silent quiet apm=off vga=normal drm.debug=0xe irqpoll >> drm_kms_helper.edid_firmware=edid/lg42lb9df.edid >> >> >> from attached dmesg: >> 1.833032] drm_kms_helper: Unknown parameter `edid' > > As your drm drivers seem to all be built-in (according to kernel timings) > you will have to build the EDID firmware into the kernel as well (see > CONFIG_EXTRA_FIRMWARE), otherwise it probably can't be loaded (unless Linus' > firmware loading patch is already in 3.6.2 and root filesystem/initrd is > ready at that time). > > Did you set CONFIG_DRM_LOAD_EDID_FIRMWARE? > If not, that may be the reason for unknown parameter `edid' error. > > > But I saw I mis-remembered side of EDID blobs, they are just 128 bytes > per block, not 512 (seems I was thinking disk sector sizes), > thus you should just get 256 bytes output. > > Just truncating the file to 256 bytes will do. You may also > change your .c file to have > uint8_t firmware[] = { > ... > }; > ... > fwrite(firmware, sizeof(firmware), 1, fd); > ... > > that way compiler gets numbers right :) > > Kernel code rejects edid with unexpected size! Thus it would have > complained if it had tried to load it with a size of 1k. > Good morning Bruno. Still no luck here. I must be doing something wrong. geexbox:/usr/src/linux-3.6.2 # grep -rn CONFIG_EXTRA_FIRMWARE .config 1406:CONFIG_EXTRA_FIRMWARE="edid/lg42lb9df.edid" 1407:CONFIG_EXTRA_FIRMWARE_DIR="firmware" geexbox:/usr/src/linux-3.6.2 # grep CONFIG_DRM_LOAD_EDID_FIRMWARE .config CONFIG_DRM_LOAD_EDID_FIRMWARE=y geexbox:/usr/src/linux-3.6.2 # ls -al firmware/edid/ -rw-r--r-- 1 root root 256 Oct 14 19:18 firmware/edid/lg42lb9df.edid I believe the the drm modules are modules and in initrd. geexbox:/boot # mkinitrd -i initrd-3.6.2 -k vmlinuz-3.6.2 Kernel image: /boot/vmlinuz-3.6.2 Initrd image: /boot/initrd-3.6.2 KMS drivers: i915 Root device: /dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 (/dev/sda4) (mounted on / as ext4) Kernel Modules: thermal fan scsi_dh scsi_dh_emc scsi_dh_rdac scsi_dh_alua scsi_dh_hp_sw crc16 jbd2 ext4 video button i2c-algo-bit drm drm_kms_helper i915 xhci-hcd hid-logitech-dj hid-generic Features: acpi kms plymouth block usb resume.userspace resume.kernel After the kernel build, I have these in /usr/src/linux-3.6.2/firmware/edid/ geexbox:/usr/src/linux-3.6.2 # ls -al firmware/edid/ lg42lb9df.edid lg42lb9df.edid.gen.o .lg42lb9df.edid.gen.o.cmd lg42lb9df.edid.gen.S geexbox:/usr/src/linux-3.6.2 # ls -al firmware/edid/* -rw-r--r-- 1 root root 256 Oct 14 19:18 firmware/edid/lg42lb9df.edid -rw-r--r-- 1 root root 1104 Oct 15 00:52 firmware/edid/lg42lb9df.edid.gen.o -rw-r--r-- 1 root root 475 Oct 15 00:52 firmware/edid/lg42lb9df.edid.gen.S After boot, from dmesg: [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 noresume splash=silent quiet apm=off vga=normal irqpoll drm_kms_helper.edid_firmware=card0-HDMI-A-1:edid/lg42lb9df.edid,card0-HDMI-A-3:edid/lg42lb9df.edid,card0-HDMI-A-3:edid/lg42lb9df.edid [ 1.835741] drm_kms_helper: Unknown parameter `edid' Regards Mark ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-13 19:17 ` Mark Hounschell 2012-10-14 8:41 ` Bruno Prémont @ 2012-10-14 8:58 ` Daniel Vetter 2012-10-14 10:20 ` [Intel-gfx] " Mark Hounschell 1 sibling, 1 reply; 25+ messages in thread From: Daniel Vetter @ 2012-10-14 8:58 UTC (permalink / raw) To: dmarkh; +Cc: markh, Bruno Prémont, Intel Graphics Development, linux-kernel On Sat, Oct 13, 2012 at 9:17 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: > One other thing I failed to mention. If i connect the TV HDMI to the Intel > boards DVI port using the adapter, at power up I get all the BIOS messages > and can enter the BIOS and all is fine. But when I let it boot all the way > up like this, I get nothing but "no signal" after leaving BIOS mode. Turning > the tv on/off, cable plug/unplug does not help. Can you please boot in that configuration on latest kernel with drm.debug=0xe added to your kernel cmdline and then attach the complete dmesg? Thanks, Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [Intel-gfx] Intel graphics drm issue? 2012-10-14 8:58 ` Daniel Vetter @ 2012-10-14 10:20 ` Mark Hounschell 2012-10-14 11:26 ` Daniel Vetter 0 siblings, 1 reply; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 10:20 UTC (permalink / raw) To: Daniel Vetter Cc: markh, Bruno Prémont, Intel Graphics Development, linux-kernel [-- Attachment #1: Type: text/plain, Size: 854 bytes --] On 10/14/2012 04:58 AM, Daniel Vetter wrote: > On Sat, Oct 13, 2012 at 9:17 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: >> One other thing I failed to mention. If i connect the TV HDMI to the Intel >> boards DVI port using the adapter, at power up I get all the BIOS messages >> and can enter the BIOS and all is fine. But when I let it boot all the way >> up like this, I get nothing but "no signal" after leaving BIOS mode. Turning >> the tv on/off, cable plug/unplug does not help. > > Can you please boot in that configuration on latest kernel with > drm.debug=0xe added to your kernel cmdline and then attach the > complete dmesg? Hi Daniel, cat /proc/cmdline root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 video=1024x768 noresume splash=silent quiet apm=off nomodeset vga=normal drm.debug=0xe dmesg is attached Mark [-- Attachment #2: dmesg-intel-dvi2hdmi-3.6.2 --] [-- Type: text/plain, Size: 49203 bytes --] [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.2 (root@geexbox) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Sun Oct 14 02:03:31 EDT 2012 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9e5efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9e5f000-0x00000000da25afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da25b000-0x00000000da266fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da267000-0x00000000da2f2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da2f3000-0x00000000da2f8fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da2f9000-0x00000000da37afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da37b000-0x00000000da40cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da40d000-0x00000000da6a2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da6a3000-0x00000000da6a3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da6a4000-0x00000000da6e6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da6e7000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: /DH77DF, BIOS KCH7710H.86A.0095.2012.0608.1754 06/08/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 5 base 21F800000 mask FFF800000 uncachable [ 0.000000] 6 base 21F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [c00fd770] [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x00bfa000-0x00bfffff] [ 0.000000] RAMDISK: [mem 0x1e6bb000-0x1ffeffff] [ 0.000000] ACPI: RSDP 000f0490 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT da25b070 00064 (v01 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: FACP da264db8 000F4 (v04 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: DSDT da25b168 09C49 (v02 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: FACS da40bf80 00040 [ 0.000000] ACPI: APIC da264eb0 00072 (v03 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: FPDT da264f28 00044 (v01 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: MCFG da264f70 0003C (v01 INTEL DH77DF 0000005F MSFT 00000097) [ 0.000000] ACPI: HPET da264fb0 00038 (v01 INTEL DH77DF 0000005F AMI. 00000005) [ 0.000000] ACPI: SSDT da264fe8 0036D (v01 INTEL DH77DF 0000005F INTL 20091112) [ 0.000000] ACPI: SSDT da265358 009AA (v01 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: SSDT da265d08 00A92 (v01 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2616MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0xdaffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xd9e5efff] [ 0.000000] node 0: [mem 0xda2f9000-0xda37afff] [ 0.000000] node 0: [mem 0xda6a3000-0xda6a3fff] [ 0.000000] node 0: [mem 0xda6e7000-0xdaffffff] [ 0.000000] On node 0 totalpages: 894343 [ 0.000000] free_area_init_node: node 0, pgdat c0894340, node_mem_map f5c9d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 220974 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5233 pages used for memmap [ 0.000000] HighMem zone: 662411 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5c5b000 s26944 r0 d22208 u49152 [ 0.000000] pcpu-alloc: s26944 r0 d22208 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 887334 [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 video=1024x768 noresume splash=silent quiet apm=off nomodeset vga=normal drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Initializing HighMem for node 0 (000377fe:000db000) [ 0.000000] Memory: 3514632k/3588096k available (4577k kernel code, 62740k reserved, 2220k data, 452k init, 2670576k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc08a4000 - 0xc0915000 ( 452 kB) [ 0.000000] .data : 0xc0678452 - 0xc08a3800 (2220 kB) [ 0.000000] .text : 0xc0200000 - 0xc0678452 (4577 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.003333] tsc: Detected 3392.341 MHz processor [ 0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.37 BogoMIPS (lpj=11307803) [ 0.000002] pid_max: default: 32768 minimum: 301 [ 0.000015] Security Framework initialized [ 0.000024] AppArmor: AppArmor initialized [ 0.000029] Mount-cache hash table entries: 512 [ 0.000135] Initializing cgroup subsys net_cls [ 0.000136] Initializing cgroup subsys blkio [ 0.000153] CPU: Physical Processor ID: 0 [ 0.000153] CPU: Processor Core ID: 0 [ 0.000156] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000156] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000678] mce: CPU supports 9 MCE banks [ 0.000688] CPU0: Thermal monitoring enabled (TM1) [ 0.000694] process: using mwait in idle threads [ 0.000698] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.000698] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000698] tlb_flushall_shift is 0x1 [ 0.001269] ACPI: Core revision 20120711 [ 0.007300] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.007721] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040630] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz stepping 09 [ 0.143703] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver. [ 0.143707] ... version: 3 [ 0.143708] ... bit width: 48 [ 0.143708] ... generic registers: 8 [ 0.143709] ... value mask: 0000ffffffffffff [ 0.143710] ... max period: 000000007fffffff [ 0.143710] ... fixed-purpose events: 3 [ 0.143711] ... event mask: 00000007000000ff [ 0.190242] CPU 1 irqstacks, hard=f54b0000 soft=f54b2000 [ 0.200466] Initializing CPU#1 [ 0.190244] smpboot: Booting Node 0, Processors #1 [ 0.216831] CPU 2 irqstacks, hard=f54c6000 soft=f54c8000 [ 0.227102] Initializing CPU#2 [ 0.216835] #2 [ 0.243420] CPU 3 irqstacks, hard=f54e0000 soft=f54e2000 [ 0.243424] #3 OK [ 0.253691] Initializing CPU#3 [ 0.257128] Brought up 4 CPUs [ 0.257130] smpboot: Total of 4 processors activated (27149.50 BogoMIPS) [ 0.259607] devtmpfs: initialized [ 0.259771] PM: Registering ACPI NVS region [mem 0xda37b000-0xda40cfff] (598016 bytes) [ 0.259776] PM: Registering ACPI NVS region [mem 0xda6a4000-0xda6e6fff] (274432 bytes) [ 0.259829] dummy: [ 0.259858] RTC time: 6:13:57, date: 10/14/12 [ 0.259882] NET: Registered protocol family 16 [ 0.296711] ACPI: bus type pci registered [ 0.296756] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.296758] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.296758] PCI: Using MMCONFIG for extended config space [ 0.296759] PCI: Using configuration type 1 for base access [ 0.297209] bio: create slab <bio-0> at 0 [ 0.297245] ACPI: Added _OSI(Module Device) [ 0.297246] ACPI: Added _OSI(Processor Device) [ 0.297247] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.297248] ACPI: Added _OSI(Processor Aggregator Device) [ 0.298575] ACPI: EC: Look up EC in DSDT [ 0.300091] ACPI: Executed 1 blocks of module-level executable AML code [ 0.310621] ACPI: SSDT da293018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.310957] ACPI: Dynamic OEM Table Load: [ 0.310959] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.320084] ACPI: SSDT da294a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.320451] ACPI: Dynamic OEM Table Load: [ 0.320452] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.330241] ACPI: SSDT da299c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.330579] ACPI: Dynamic OEM Table Load: [ 0.330580] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.340737] ACPI: Interpreter enabled [ 0.340743] ACPI: (supports S0 S3 S4 S5) [ 0.340754] ACPI: Using IOAPIC for interrupt routing [ 0.344718] ACPI: Power Resource [FN00] (off) [ 0.344768] ACPI: Power Resource [FN01] (off) [ 0.344815] ACPI: Power Resource [FN02] (off) [ 0.344863] ACPI: Power Resource [FN03] (off) [ 0.344910] ACPI: Power Resource [FN04] (off) [ 0.345269] ACPI: No dock devices found. [ 0.345272] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.345505] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.345835] PCI host bridge to bus 0000:00 [ 0.345837] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff] [ 0.345838] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.345840] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.345841] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.345842] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.345843] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.345844] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.345845] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.345846] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.345847] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.345848] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.345849] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.345855] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.345885] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.345907] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.345924] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000 [ 0.345932] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.345936] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.345939] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 0.345983] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.346003] pci 0000:00:14.0: reg 10: [mem 0xf7d20000-0xf7d2ffff 64bit] [ 0.346067] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.346088] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.346109] pci 0000:00:16.0: reg 10: [mem 0xf7d37000-0xf7d3700f 64bit] [ 0.346180] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.346207] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.346223] pci 0000:00:19.0: reg 10: [mem 0xf7d00000-0xf7d1ffff] [ 0.346231] pci 0000:00:19.0: reg 14: [mem 0xf7d35000-0xf7d35fff] [ 0.346239] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f] [ 0.346296] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.346317] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.346336] pci 0000:00:1a.0: reg 10: [mem 0xf7d34000-0xf7d343ff] [ 0.346418] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.346445] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.346575] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.346612] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 0.346683] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.346708] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.346727] pci 0000:00:1d.0: reg 10: [mem 0xf7d33000-0xf7d333ff] [ 0.346810] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.346832] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100 [ 0.346948] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.346964] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7] [ 0.346972] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3] [ 0.346979] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7] [ 0.346986] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3] [ 0.346993] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 0.347001] pci 0000:00:1f.2: reg 24: [mem 0xf7d32000-0xf7d327ff] [ 0.347041] pci 0000:00:1f.2: PME# supported from D3hot [ 0.347056] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.347069] pci 0000:00:1f.3: reg 10: [mem 0xf7d31000-0xf7d310ff 64bit] [ 0.347088] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 0.347126] pci_bus 0000:01: busn_res: [bus 01-02] is inserted under [bus 00-3e] [ 0.347143] pci 0000:01:00.0: [10b5:8112] type 01 class 0x060400 [ 0.347248] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.347256] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.347258] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.347304] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 01-02] [ 0.347324] pci 0000:02:04.0: [13f6:8788] type 00 class 0x040100 [ 0.347347] pci 0000:02:04.0: reg 10: [io 0xe000-0xe0ff] [ 0.347457] pci 0000:02:04.0: supports D1 D2 [ 0.347509] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.347513] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.347595] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e] [ 0.347598] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.347650] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-3e] [ 0.347653] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.347657] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.347660] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.347679] pci_bus 0000:00: on NUMA node 0 [ 0.347680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.347768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.347796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT] [ 0.347818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.347909] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.348047] pci0000:00: ACPI _OSC control (0x18) granted [ 0.350903] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.350940] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.350978] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.351015] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.351049] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.351086] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.351122] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.351156] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.351195] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.351198] vgaarb: loaded [ 0.351198] vgaarb: bridge control possible 0000:00:02.0 [ 0.351256] SCSI subsystem initialized [ 0.351258] ACPI: bus type scsi registered [ 0.351274] libata version 3.00 loaded. [ 0.351284] ACPI: bus type usb registered [ 0.351293] usbcore: registered new interface driver usbfs [ 0.351298] usbcore: registered new interface driver hub [ 0.351309] usbcore: registered new device driver usb [ 0.351335] PCI: Using ACPI for IRQ routing [ 0.352703] PCI: pci_cache_line_size set to 64 bytes [ 0.352751] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.352753] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.352754] e820: reserve RAM buffer [mem 0xd9e5f000-0xdbffffff] [ 0.352755] e820: reserve RAM buffer [mem 0xda37b000-0xdbffffff] [ 0.352757] e820: reserve RAM buffer [mem 0xda6a4000-0xdbffffff] [ 0.352758] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.352808] NetLabel: Initializing [ 0.352809] NetLabel: domain hash size = 128 [ 0.352810] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.352815] NetLabel: unlabeled traffic allowed by default [ 0.352864] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.352868] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.354876] Switching to clocksource hpet [ 0.354917] AppArmor: AppArmor Filesystem Enabled [ 0.354924] pnp: PnP ACPI init [ 0.354929] ACPI: bus type pnp registered [ 0.355110] pnp 00:00: [bus 00-3e] [ 0.355112] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.355113] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.355114] pnp 00:00: [io 0x0d00-0xffff window] [ 0.355115] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.355116] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.355118] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.355119] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.355120] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.355121] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.355122] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.355124] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.355125] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.355126] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.355127] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.355128] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.355129] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.355130] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.355131] pnp 00:00: [mem 0xdfa00000-0xfeafffff window] [ 0.355132] pnp 00:00: [mem 0x00010000-0x0001ffff window] [ 0.355163] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.355179] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.355196] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.355198] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.355205] pnp 00:02: [io 0x0000-0x001f] [ 0.355206] pnp 00:02: [io 0x0081-0x0091] [ 0.355207] pnp 00:02: [io 0x0093-0x009f] [ 0.355208] pnp 00:02: [io 0x00c0-0x00df] [ 0.355209] pnp 00:02: [dma 4] [ 0.355220] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.355225] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.355235] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.355289] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.355301] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.355308] pnp 00:05: [io 0x002e-0x002f] [ 0.355309] pnp 00:05: [io 0x004e-0x004f] [ 0.355310] pnp 00:05: [io 0x0061] [ 0.355311] pnp 00:05: [io 0x0063] [ 0.355312] pnp 00:05: [io 0x0065] [ 0.355313] pnp 00:05: [io 0x0067] [ 0.355314] pnp 00:05: [io 0x0070] [ 0.355315] pnp 00:05: [io 0x0080] [ 0.355316] pnp 00:05: [io 0x0092] [ 0.355317] pnp 00:05: [io 0x00b2-0x00b3] [ 0.355318] pnp 00:05: [io 0x0680-0x069f] [ 0.355319] pnp 00:05: [io 0x1000-0x100f] [ 0.355320] pnp 00:05: [io 0xffff] [ 0.355321] pnp 00:05: [io 0xffff] [ 0.355322] pnp 00:05: [io 0x0400-0x0453] [ 0.355323] pnp 00:05: [io 0x0458-0x047f] [ 0.355324] pnp 00:05: [io 0x0500-0x057f] [ 0.355325] pnp 00:05: [io 0x164e-0x164f] [ 0.355345] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.355346] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.355347] system 00:05: [io 0xffff] has been reserved [ 0.355348] system 00:05: [io 0xffff] has been reserved [ 0.355350] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.355351] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.355352] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.355353] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.355355] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.355359] pnp 00:06: [io 0x0070-0x0077] [ 0.355367] pnp 00:06: [irq 8] [ 0.355378] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.355395] pnp 00:07: [io 0x0454-0x0457] [ 0.355412] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.355414] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.355468] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.355469] pnp 00:08: [io 0x0a30-0x0a3f] [ 0.355471] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.355472] pnp 00:08: [io 0x0250-0x025f] [ 0.355489] system 00:08: [io 0x0a30-0x0a3f] has been reserved [ 0.355490] system 00:08: [io 0x0250-0x025f] has been reserved [ 0.355491] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.355527] pnp 00:09: [io 0x0010-0x001f] [ 0.355529] pnp 00:09: [io 0x0022-0x003f] [ 0.355529] pnp 00:09: [io 0x0044-0x005f] [ 0.355530] pnp 00:09: [io 0x0062-0x0063] [ 0.355531] pnp 00:09: [io 0x0065-0x006f] [ 0.355532] pnp 00:09: [io 0x0072-0x007f] [ 0.355533] pnp 00:09: [io 0x0080] [ 0.355534] pnp 00:09: [io 0x0084-0x0086] [ 0.355535] pnp 00:09: [io 0x0088] [ 0.355536] pnp 00:09: [io 0x008c-0x008e] [ 0.355537] pnp 00:09: [io 0x0090-0x009f] [ 0.355538] pnp 00:09: [io 0x00a2-0x00bf] [ 0.355539] pnp 00:09: [io 0x00e0-0x00ef] [ 0.355540] pnp 00:09: [io 0x04d0-0x04d1] [ 0.355560] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.355562] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.355567] pnp 00:0a: [io 0x00f0-0x00ff] [ 0.355574] pnp 00:0a: [irq 13] [ 0.355586] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.355762] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff] [ 0.355763] pnp 00:0b: [mem 0xfed10000-0xfed17fff] [ 0.355764] pnp 00:0b: [mem 0xfed18000-0xfed18fff] [ 0.355765] pnp 00:0b: [mem 0xfed19000-0xfed19fff] [ 0.355766] pnp 00:0b: [mem 0xf8000000-0xfbffffff] [ 0.355767] pnp 00:0b: [mem 0xfed20000-0xfed3ffff] [ 0.355768] pnp 00:0b: [mem 0xfed90000-0xfed93fff] [ 0.355769] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] [ 0.355770] pnp 00:0b: [mem 0xff000000-0xffffffff] [ 0.355771] pnp 00:0b: [mem 0xfee00000-0xfeefffff] [ 0.355772] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff] [ 0.355804] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.355805] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.355806] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.355808] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.355809] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.355810] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.355811] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.355813] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.355814] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.355815] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.355817] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.355818] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.355926] pnp 00:0c: [mem 0x20000000-0x201fffff] [ 0.355927] pnp 00:0c: [mem 0x40004000-0x40004fff] [ 0.355960] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 0.355961] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved [ 0.355962] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.355977] pnp: PnP ACPI: found 13 devices [ 0.355978] ACPI: ACPI bus type pnp unregistered [ 0.391292] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.391296] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.391311] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.391312] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.391316] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.391336] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.391339] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.391343] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.391375] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.391377] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.391378] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.391379] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.391380] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.391381] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.391382] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.391383] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.391385] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.391386] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 0.391387] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.391388] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.391389] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.391390] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.391406] NET: Registered protocol family 2 [ 0.391489] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.391613] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.391667] TCP: Hash tables configured (established 131072 bind 65536) [ 0.391673] TCP: reno registered [ 0.391674] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.391676] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.391704] NET: Registered protocol family 1 [ 0.391710] pci 0000:00:02.0: Boot video device [ 0.424745] PCI: CLS 64 bytes, default 64 [ 0.424785] Unpacking initramfs... [ 0.724567] Freeing initrd memory: 25812k freed [ 0.727033] audit: initializing netlink socket (disabled) [ 0.727041] type=2000 audit(1350195237.623:1): initialized [ 0.737799] bounce pool size: 64 pages [ 0.737802] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.738617] VFS: Disk quotas dquot_6.5.2 [ 0.738643] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.738774] msgmni has been set to 1698 [ 0.738901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.738917] io scheduler noop registered [ 0.738918] io scheduler deadline registered [ 0.738922] io scheduler cfq registered (default) [ 0.738984] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.739170] intel_idle: MWAIT substates: 0x1120 [ 0.739171] intel_idle: v0.4 model 0x3A [ 0.739172] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.741909] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.742281] Non-volatile memory driver v1.3 [ 0.742282] Linux agpgart interface v0.103 [ 0.742356] ahci 0000:00:1f.2: version 3.0 [ 0.742392] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.742415] ahci: SSS flag set, parallel bus scan disabled [ 0.753796] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode [ 0.753800] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.753809] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.767317] scsi0 : ahci [ 0.767352] scsi1 : ahci [ 0.767384] scsi2 : ahci [ 0.767413] scsi3 : ahci [ 0.767442] scsi4 : ahci [ 0.767470] scsi5 : ahci [ 0.767491] ata1: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32100 irq 41 [ 0.767493] ata2: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32180 irq 41 [ 0.767494] ata3: DUMMY [ 0.767495] ata4: DUMMY [ 0.767495] ata5: DUMMY [ 0.767498] ata6: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32380 irq 41 [ 0.767535] libphy: Fixed MDIO Bus: probed [ 0.767537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.767559] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.767562] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.767566] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.771447] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.771454] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 0.771464] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d34000 [ 0.780370] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.780389] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.780391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.780394] usb usb1: Product: EHCI Host Controller [ 0.780396] usb usb1: Manufacturer: Linux 3.6.2 ehci_hcd [ 0.780398] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.780476] hub 1-0:1.0: USB hub found [ 0.780478] hub 1-0:1.0: 2 ports detected [ 0.780521] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.780524] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.780526] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.784410] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.784415] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 0.784425] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d33000 [ 0.793665] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.793678] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.793680] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.793682] usb usb2: Product: EHCI Host Controller [ 0.793684] usb usb2: Manufacturer: Linux 3.6.2 ehci_hcd [ 0.793687] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.793754] hub 2-0:1.0: USB hub found [ 0.793756] hub 2-0:1.0: 2 ports detected [ 0.793788] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.793795] uhci_hcd: USB Universal Host Controller Interface driver [ 0.793802] Initializing USB Mass Storage driver... [ 0.793811] usbcore: registered new interface driver usb-storage [ 0.793811] USB Mass Storage support registered. [ 0.793814] usbcore: registered new interface driver ums-alauda [ 0.793817] usbcore: registered new interface driver ums-cypress [ 0.793820] usbcore: registered new interface driver ums-datafab [ 0.793824] usbcore: registered new interface driver ums-freecom [ 0.793827] usbcore: registered new interface driver ums-isd200 [ 0.793830] usbcore: registered new interface driver ums-jumpshot [ 0.793833] usbcore: registered new interface driver ums-karma [ 0.793836] usbcore: registered new interface driver ums-onetouch [ 0.793839] usbcore: registered new interface driver ums-sddr09 [ 0.793841] usbcore: registered new interface driver ums-sddr55 [ 0.793844] usbcore: registered new interface driver ums-usbat [ 0.793867] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.796359] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.796364] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.796406] mousedev: PS/2 mouse device common for all mice [ 0.796452] rtc_cmos 00:06: RTC can wake from S4 [ 0.796549] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.796577] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.796613] cpuidle: using governor ladder [ 0.796693] usbcore: registered new interface driver usbhid [ 0.796694] usbhid: USB HID core driver [ 0.796769] ashmem: initialized [ 0.796852] TCP: cubic registered [ 0.796902] NET: Registered protocol family 10 [ 0.797008] lib80211: common routines for IEEE802.11 drivers [ 0.797009] lib80211_crypt: registered algorithm 'NULL' [ 0.797013] Key type dns_resolver registered [ 0.797015] Key type ceph registered [ 0.797019] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 0.797163] Using IPI No-Shortcut mode [ 0.797258] registered taskstats version 1 [ 0.797560] Magic number: 0:877:215 [ 0.797565] event_source software: hash matches [ 0.797649] rtc_cmos 00:06: setting system clock to 2012-10-14 06:13:58 UTC (1350195238) [ 1.086194] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.086201] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.095436] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.095441] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.095445] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.098202] ata1.00: ATAPI: HL-DT-ST BDDVDRW UH12LS29, 1.00, max UDMA/133 [ 1.103241] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.103247] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.103250] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.105994] ata1.00: configured for UDMA/133 [ 1.124818] scsi 0:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12LS29 1.00 PQ: 0 ANSI: 5 [ 1.209501] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.209505] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.209779] hub 1-1:1.0: USB hub found [ 1.209906] hub 1-1:1.0: 6 ports detected [ 1.315515] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.438844] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.438849] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.439123] hub 2-1:1.0: USB hub found [ 1.439250] hub 2-1:1.0: 8 ports detected [ 1.441833] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.443213] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.443217] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.443220] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.453643] ata2.00: ATA-9: INTEL SSDSC2CW060A3, 400i, max UDMA/133 [ 1.453647] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.463182] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.463187] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.463190] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.473588] ata2.00: configured for UDMA/133 [ 1.473735] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CW06 400i PQ: 0 ANSI: 5 [ 1.125041] ACPI: Invalid Power Resource to register! [ 1.473911] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.474088] sd 1:0:0:0: [sda] Write Protect is off [ 1.474090] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.474152] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.474709] sda: sda1 sda2 sda3 sda4 [ 1.475131] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.518422] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd [ 1.604771] usb 1-1.2: New USB device found, idVendor=0846, idProduct=9011 [ 1.604775] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.604778] usb 1-1.2: Product: Remote Download Wireless Adapter [ 1.604780] usb 1-1.2: Manufacturer: Broadcom [ 1.604782] usb 1-1.2: SerialNumber: 0 [ 1.704489] usb 2-1.6: new full-speed USB device number 3 using ehci_hcd [ 1.724345] tsc: Refined TSC clocksource calibration: 3392.303 MHz [ 1.724351] Switching to clocksource tsc [ 1.790828] ata6: SATA link down (SStatus 0 SControl 300) [ 1.790974] Freeing unused kernel memory: 452k freed [ 1.791100] usb 2-1.6: New USB device found, idVendor=19ff, idProduct=0231 [ 1.791103] usb 2-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.791104] usb 2-1.6: Product: Dynex wireless combo [ 1.813099] emc: device handler registered [ 1.814004] rdac: device handler registered [ 1.814973] alua: device handler registered [ 1.815839] hp_sw: device handler registered [ 1.818371] udevd[116]: starting version 182 [ 1.823917] ACPI: Fan [FAN0] (off) [ 1.823942] ACPI: Fan [FAN1] (off) [ 1.823960] ACPI: Fan [FAN2] (off) [ 1.823977] ACPI: Fan [FAN3] (off) [ 1.823993] ACPI: Fan [FAN4] (off) [ 1.824545] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.824572] ACPI: Power Button [PWRB] [ 1.824594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.824611] ACPI: Power Button [PWRF] [ 1.827804] [drm] Initialized drm 1.1.0 20060810 [ 1.832818] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.832824] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.832828] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.832909] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.832915] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d20000 [ 1.832955] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 1.832996] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.832997] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.832999] usb usb3: Product: xHCI Host Controller [ 1.833000] usb usb3: Manufacturer: Linux 3.6.2 xhci_hcd [ 1.833001] usb usb3: SerialNumber: 0000:00:14.0 [ 1.833195] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module. [ 1.833255] DRM: Fill_in_dev failed. [ 1.834141] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input2 [ 1.834200] hid-generic 0003:19FF:0231.0001: input,hidraw0: USB HID v1.11 Keyboard [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input0 [ 1.834312] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input3 [ 1.835090] hid-generic 0003:19FF:0231.0002: input,hidraw1: USB HID v1.11 Mouse [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input1 [ 1.847549] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.847551] ACPI: Thermal Zone [TZ00] (28 C) [ 1.847676] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.847677] ACPI: Thermal Zone [TZ01] (30 C) [ 1.847813] xHCI xhci_add_endpoint called for root hub [ 1.847815] xHCI xhci_check_bandwidth called for root hub [ 1.847927] hub 3-0:1.0: USB hub found [ 1.847936] hub 3-0:1.0: 4 ports detected [ 1.847993] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.847995] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.848014] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.848015] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.848016] usb usb4: Product: xHCI Host Controller [ 1.848017] usb usb4: Manufacturer: Linux 3.6.2 xhci_hcd [ 1.848018] usb usb4: SerialNumber: 0000:00:14.0 [ 1.848082] xHCI xhci_add_endpoint called for root hub [ 1.848083] xHCI xhci_check_bandwidth called for root hub [ 1.848098] hub 4-0:1.0: USB hub found [ 1.848105] hub 4-0:1.0: 4 ports detected [ 1.919168] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 1.933621] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr [ 2.232015] systemd-readahead-replay[291]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day. [ 2.695579] udevd[322]: starting version 182 [ 2.759396] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12 [ 2.762847] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12 [ 2.763102] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12 [ 2.763406] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12 [ 2.763692] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 2.843219] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 2.856919] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr [ 3.089646] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.090091] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.090813] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 3.090814] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 3.090837] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.090911] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.090936] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 3.100642] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 3.104413] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 3.104440] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.112762] kvm: disabled by bios [ 3.118958] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.118960] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.119030] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.266753] Adding 4193276k swap on /dev/sda3. Priority:-1 extents:1 across:4193276k SS [ 3.344288] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) e8:40:f2:05:f1:85 [ 3.344291] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.344340] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 1.473943] ACPI: Invalid Power Resource to register! [ 3.344418] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251) [ 3.344423] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.344425] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251) [ 3.344427] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.344428] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.344453] ACPI Warning: 0x0000f040-0x0000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251) [ 3.344457] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.361826] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 4.430067] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4.533062] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4.533147] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.789014] RPC: Registered named UNIX socket transport module. [ 4.789016] RPC: Registered udp transport module. [ 4.789016] RPC: Registered tcp transport module. [ 4.789017] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.791233] FS-Cache: Loaded [ 4.793950] FS-Cache: Netfs 'nfs' registered for caching [ 5.356822] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr,commit=0 [ 5.359365] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0 [ 6.029089] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 6.029093] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 6.029127] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Intel graphics drm issue? 2012-10-14 10:20 ` [Intel-gfx] " Mark Hounschell @ 2012-10-14 11:26 ` Daniel Vetter 2012-10-14 11:39 ` [Intel-gfx] " Mark Hounschell 2012-10-14 14:19 ` Mark Hounschell 0 siblings, 2 replies; 25+ messages in thread From: Daniel Vetter @ 2012-10-14 11:26 UTC (permalink / raw) To: dmarkh; +Cc: markh, Bruno Prémont, Intel Graphics Development, linux-kernel On Sun, Oct 14, 2012 at 12:20 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: > Hi Daniel, > > cat /proc/cmdline > root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 > video=1024x768 noresume splash=silent quiet apm=off nomodeset vga=normal > drm.debug=0xe > > dmesg is attached >From the dmesg: [ 1.833195] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module. Which is the root-cause preventing i915.ko from loading. Now with 3.7 we /shouldn't/ all that agp crap any longer on snb/ivb, so I'm a bit confused why it still tries to initialize it. Can you maybe attach your .config? Also, we need to employ some dirty runtime tricks to no longer require agp on newer chips, since we still need to keep it around for backwards-compat with old userspace on old chips. Can you please check with the below diff whether this hack works? Thanks, Daniel diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index a7837e5..1152502 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -842,6 +842,7 @@ i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (intel_info->gen != 3) { driver.driver_features &= ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP); + printk("dropping agp requirement\n"); } else if (!intel_agp_enabled) { DRM_ERROR("drm/i915 can't work without intel_agp module!\n"); return -ENODEV; -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [Intel-gfx] Intel graphics drm issue? 2012-10-14 11:26 ` Daniel Vetter @ 2012-10-14 11:39 ` Mark Hounschell 2012-10-14 14:19 ` Mark Hounschell 1 sibling, 0 replies; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 11:39 UTC (permalink / raw) To: Daniel Vetter Cc: markh, Bruno Prémont, Intel Graphics Development, linux-kernel On 10/14/2012 07:26 AM, Daniel Vetter wrote: > On Sun, Oct 14, 2012 at 12:20 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: >> Hi Daniel, >> >> cat /proc/cmdline >> root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 >> video=1024x768 noresume splash=silent quiet apm=off nomodeset vga=normal >> drm.debug=0xe >> >> dmesg is attached > >>From the dmesg: > > [ 1.833195] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the > agpgart module. > > Which is the root-cause preventing i915.ko from loading. Now with 3.7 > we /shouldn't/ all that agp crap any longer on snb/ivb, so I'm a bit > confused why it still tries to initialize it. Can you maybe attach > your .config? > Did you mean 3.6 above? I used 3.6.2? If I'm using the right kernel I will apply the patch and try. Let me know. > Also, we need to employ some dirty runtime tricks to no longer require > agp on newer chips, since we still need to keep it around for > backwards-compat with old userspace on old chips. Can you please check > with the below diff whether this hack works? > > Thanks, Daniel > > diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c > index a7837e5..1152502 100644 > --- a/drivers/gpu/drm/i915/i915_drv.c > +++ b/drivers/gpu/drm/i915/i915_drv.c > @@ -842,6 +842,7 @@ i915_pci_probe(struct pci_dev *pdev, const struct > pci_device_id *ent) > if (intel_info->gen != 3) { > driver.driver_features &= > ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP); > + printk("dropping agp requirement\n"); > } else if (!intel_agp_enabled) { > DRM_ERROR("drm/i915 can't work without intel_agp module!\n"); > return -ENODEV; > Doesn't this patch only add a printk? Is that what you want me to do? Mark ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [Intel-gfx] Intel graphics drm issue? 2012-10-14 11:26 ` Daniel Vetter 2012-10-14 11:39 ` [Intel-gfx] " Mark Hounschell @ 2012-10-14 14:19 ` Mark Hounschell 2012-10-14 14:40 ` Daniel Vetter 1 sibling, 1 reply; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 14:19 UTC (permalink / raw) To: Daniel Vetter Cc: markh, Bruno Prémont, Intel Graphics Development, linux-kernel [-- Attachment #1: Type: text/plain, Size: 1739 bytes --] On 10/14/2012 07:26 AM, Daniel Vetter wrote: > On Sun, Oct 14, 2012 at 12:20 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: >> Hi Daniel, >> >> cat /proc/cmdline >> root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 >> video=1024x768 noresume splash=silent quiet apm=off nomodeset vga=normal >> drm.debug=0xe >> >> dmesg is attached > >>From the dmesg: > > [ 1.833195] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the > agpgart module. > > Which is the root-cause preventing i915.ko from loading. Now with 3.7 > we /shouldn't/ all that agp crap any longer on snb/ivb, so I'm a bit > confused why it still tries to initialize it. Can you maybe attach > your .config? > > Also, we need to employ some dirty runtime tricks to no longer require > agp on newer chips, since we still need to keep it around for > backwards-compat with old userspace on old chips. Can you please check > with the below diff whether this hack works? > > Thanks, Daniel > > diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c > index a7837e5..1152502 100644 > --- a/drivers/gpu/drm/i915/i915_drv.c > +++ b/drivers/gpu/drm/i915/i915_drv.c > @@ -842,6 +842,7 @@ i915_pci_probe(struct pci_dev *pdev, const struct > pci_device_id *ent) > if (intel_info->gen != 3) { > driver.driver_features &= > ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP); > + printk("dropping agp requirement\n"); > } else if (!intel_agp_enabled) { > DRM_ERROR("drm/i915 can't work without intel_agp module!\n"); > return -ENODEV; > OK. Applied to 3.6.2. The dmesg is attached. The message did not show up. I'll be here most of the day. Mark [-- Attachment #2: dmesg-dvi2hdmi-3.6.2-1 --] [-- Type: text/plain, Size: 49285 bytes --] [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.2 (root@geexbox) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Sun Oct 14 02:03:31 EDT 2012 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9e5efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9e5f000-0x00000000da25afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da25b000-0x00000000da266fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da267000-0x00000000da2f2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da2f3000-0x00000000da2f8fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da2f9000-0x00000000da37afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da37b000-0x00000000da40cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da40d000-0x00000000da6a2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da6a3000-0x00000000da6a3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da6a4000-0x00000000da6e6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da6e7000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: /DH77DF, BIOS KCH7710H.86A.0095.2012.0608.1754 06/08/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 5 base 21F800000 mask FFF800000 uncachable [ 0.000000] 6 base 21F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [c00fd770] [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x00bfa000-0x00bfffff] [ 0.000000] RAMDISK: [mem 0x1e6bc000-0x1ffeffff] [ 0.000000] ACPI: RSDP 000f0490 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT da25b070 00064 (v01 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: FACP da264db8 000F4 (v04 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: DSDT da25b168 09C49 (v02 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: FACS da40bf80 00040 [ 0.000000] ACPI: APIC da264eb0 00072 (v03 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: FPDT da264f28 00044 (v01 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: MCFG da264f70 0003C (v01 INTEL DH77DF 0000005F MSFT 00000097) [ 0.000000] ACPI: HPET da264fb0 00038 (v01 INTEL DH77DF 0000005F AMI. 00000005) [ 0.000000] ACPI: SSDT da264fe8 0036D (v01 INTEL DH77DF 0000005F INTL 20091112) [ 0.000000] ACPI: SSDT da265358 009AA (v01 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: SSDT da265d08 00A92 (v01 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2616MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0xdaffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xd9e5efff] [ 0.000000] node 0: [mem 0xda2f9000-0xda37afff] [ 0.000000] node 0: [mem 0xda6a3000-0xda6a3fff] [ 0.000000] node 0: [mem 0xda6e7000-0xdaffffff] [ 0.000000] On node 0 totalpages: 894343 [ 0.000000] free_area_init_node: node 0, pgdat c0894340, node_mem_map f5c9d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 220974 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5233 pages used for memmap [ 0.000000] HighMem zone: 662411 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5c5b000 s26944 r0 d22208 u49152 [ 0.000000] pcpu-alloc: s26944 r0 d22208 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 887334 [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 video=1024x768 noresume splash=silent quiet apm=off nomodeset vga=normal drm.debug=0xe irqpoll [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Initializing HighMem for node 0 (000377fe:000db000) [ 0.000000] Memory: 3514636k/3588096k available (4577k kernel code, 62736k reserved, 2220k data, 452k init, 2670576k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc08a4000 - 0xc0915000 ( 452 kB) [ 0.000000] .data : 0xc0678452 - 0xc08a3800 (2220 kB) [ 0.000000] .text : 0xc0200000 - 0xc0678452 (4577 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.003333] tsc: Detected 3392.155 MHz processor [ 0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.98 BogoMIPS (lpj=11307183) [ 0.000002] pid_max: default: 32768 minimum: 301 [ 0.000015] Security Framework initialized [ 0.000024] AppArmor: AppArmor initialized [ 0.000028] Mount-cache hash table entries: 512 [ 0.000135] Initializing cgroup subsys net_cls [ 0.000136] Initializing cgroup subsys blkio [ 0.000153] CPU: Physical Processor ID: 0 [ 0.000154] CPU: Processor Core ID: 0 [ 0.000156] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000156] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000695] mce: CPU supports 9 MCE banks [ 0.000704] CPU0: Thermal monitoring enabled (TM1) [ 0.000710] process: using mwait in idle threads [ 0.000715] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.000715] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000715] tlb_flushall_shift is 0x1 [ 0.001279] ACPI: Core revision 20120711 [ 0.007330] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.007742] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040649] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz stepping 09 [ 0.146599] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver. [ 0.146603] ... version: 3 [ 0.146604] ... bit width: 48 [ 0.146604] ... generic registers: 8 [ 0.146605] ... value mask: 0000ffffffffffff [ 0.146606] ... max period: 000000007fffffff [ 0.146606] ... fixed-purpose events: 3 [ 0.146607] ... event mask: 00000007000000ff [ 0.193140] CPU 1 irqstacks, hard=f54b0000 soft=f54b2000 [ 0.203366] Initializing CPU#1 [ 0.193142] smpboot: Booting Node 0, Processors #1 [ 0.219731] CPU 2 irqstacks, hard=f54c6000 soft=f54c8000 [ 0.229900] Initializing CPU#2 [ 0.219734] #2 [ 0.246321] CPU 3 irqstacks, hard=f54e0000 soft=f54e2000 [ 0.246324] #3 OK [ 0.256590] Initializing CPU#3 [ 0.260025] Brought up 4 CPUs [ 0.260028] smpboot: Total of 4 processors activated (27148.95 BogoMIPS) [ 0.262503] devtmpfs: initialized [ 0.262674] PM: Registering ACPI NVS region [mem 0xda37b000-0xda40cfff] (598016 bytes) [ 0.262679] PM: Registering ACPI NVS region [mem 0xda6a4000-0xda6e6fff] (274432 bytes) [ 0.262732] dummy: [ 0.262761] RTC time: 10:13:59, date: 10/14/12 [ 0.262785] NET: Registered protocol family 16 [ 0.299619] ACPI: bus type pci registered [ 0.299664] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.299666] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.299666] PCI: Using MMCONFIG for extended config space [ 0.299667] PCI: Using configuration type 1 for base access [ 0.300122] bio: create slab <bio-0> at 0 [ 0.300159] ACPI: Added _OSI(Module Device) [ 0.300159] ACPI: Added _OSI(Processor Device) [ 0.300160] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.300161] ACPI: Added _OSI(Processor Aggregator Device) [ 0.301489] ACPI: EC: Look up EC in DSDT [ 0.303004] ACPI: Executed 1 blocks of module-level executable AML code [ 0.313523] ACPI: SSDT da293018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.313858] ACPI: Dynamic OEM Table Load: [ 0.313860] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.322988] ACPI: SSDT da294a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.323354] ACPI: Dynamic OEM Table Load: [ 0.323355] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.333140] ACPI: SSDT da299c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.333478] ACPI: Dynamic OEM Table Load: [ 0.333479] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.343545] ACPI: Interpreter enabled [ 0.343551] ACPI: (supports S0 S3 S4 S5) [ 0.343562] ACPI: Using IOAPIC for interrupt routing [ 0.347524] ACPI: Power Resource [FN00] (off) [ 0.347573] ACPI: Power Resource [FN01] (off) [ 0.347620] ACPI: Power Resource [FN02] (off) [ 0.347669] ACPI: Power Resource [FN03] (off) [ 0.347716] ACPI: Power Resource [FN04] (off) [ 0.348073] ACPI: No dock devices found. [ 0.348076] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.348309] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.348639] PCI host bridge to bus 0000:00 [ 0.348641] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff] [ 0.348642] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.348644] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.348645] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.348646] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.348647] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.348648] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.348649] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.348650] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.348651] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.348653] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.348654] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.348660] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.348689] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.348711] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.348729] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000 [ 0.348736] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.348741] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.348744] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 0.348787] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.348807] pci 0000:00:14.0: reg 10: [mem 0xf7d20000-0xf7d2ffff 64bit] [ 0.348871] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.348892] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.348913] pci 0000:00:16.0: reg 10: [mem 0xf7d37000-0xf7d3700f 64bit] [ 0.348984] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.349011] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.349027] pci 0000:00:19.0: reg 10: [mem 0xf7d00000-0xf7d1ffff] [ 0.349034] pci 0000:00:19.0: reg 14: [mem 0xf7d35000-0xf7d35fff] [ 0.349042] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f] [ 0.349098] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.349120] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.349139] pci 0000:00:1a.0: reg 10: [mem 0xf7d34000-0xf7d343ff] [ 0.349222] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.349248] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.349377] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.349414] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 0.349486] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.349511] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.349530] pci 0000:00:1d.0: reg 10: [mem 0xf7d33000-0xf7d333ff] [ 0.349613] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.349636] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100 [ 0.349752] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.349768] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7] [ 0.349775] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3] [ 0.349783] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7] [ 0.349790] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3] [ 0.349797] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 0.349804] pci 0000:00:1f.2: reg 24: [mem 0xf7d32000-0xf7d327ff] [ 0.349844] pci 0000:00:1f.2: PME# supported from D3hot [ 0.349860] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.349873] pci 0000:00:1f.3: reg 10: [mem 0xf7d31000-0xf7d310ff 64bit] [ 0.349892] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 0.349930] pci_bus 0000:01: busn_res: [bus 01-02] is inserted under [bus 00-3e] [ 0.349947] pci 0000:01:00.0: [10b5:8112] type 01 class 0x060400 [ 0.350053] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.350060] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.350062] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.350108] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 01-02] [ 0.350128] pci 0000:02:04.0: [13f6:8788] type 00 class 0x040100 [ 0.350151] pci 0000:02:04.0: reg 10: [io 0xe000-0xe0ff] [ 0.350262] pci 0000:02:04.0: supports D1 D2 [ 0.350313] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.350318] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.350399] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e] [ 0.350401] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.350453] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-3e] [ 0.350456] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.350460] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.350463] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.350482] pci_bus 0000:00: on NUMA node 0 [ 0.350484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.350571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.350599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT] [ 0.350621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.350712] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.350852] pci0000:00: ACPI _OSC control (0x18) granted [ 0.353707] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.353746] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.353781] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.353815] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.353851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.353888] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.353925] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.353959] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.354001] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.354004] vgaarb: loaded [ 0.354005] vgaarb: bridge control possible 0000:00:02.0 [ 0.354063] SCSI subsystem initialized [ 0.354065] ACPI: bus type scsi registered [ 0.354081] libata version 3.00 loaded. [ 0.354091] ACPI: bus type usb registered [ 0.354100] usbcore: registered new interface driver usbfs [ 0.354105] usbcore: registered new interface driver hub [ 0.354116] usbcore: registered new device driver usb [ 0.354142] PCI: Using ACPI for IRQ routing [ 0.355510] PCI: pci_cache_line_size set to 64 bytes [ 0.355558] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.355559] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.355560] e820: reserve RAM buffer [mem 0xd9e5f000-0xdbffffff] [ 0.355562] e820: reserve RAM buffer [mem 0xda37b000-0xdbffffff] [ 0.355563] e820: reserve RAM buffer [mem 0xda6a4000-0xdbffffff] [ 0.355564] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.355615] NetLabel: Initializing [ 0.355616] NetLabel: domain hash size = 128 [ 0.355616] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.355622] NetLabel: unlabeled traffic allowed by default [ 0.355675] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.355679] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.357687] Switching to clocksource hpet [ 0.357728] AppArmor: AppArmor Filesystem Enabled [ 0.357736] pnp: PnP ACPI init [ 0.357741] ACPI: bus type pnp registered [ 0.357921] pnp 00:00: [bus 00-3e] [ 0.357923] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.357924] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.357925] pnp 00:00: [io 0x0d00-0xffff window] [ 0.357926] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.357928] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.357929] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.357930] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.357931] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.357932] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.357933] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.357935] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.357936] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.357937] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.357938] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.357939] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.357940] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.357941] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.357942] pnp 00:00: [mem 0xdfa00000-0xfeafffff window] [ 0.357943] pnp 00:00: [mem 0x00010000-0x0001ffff window] [ 0.357974] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.357990] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.358007] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.358009] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.358016] pnp 00:02: [io 0x0000-0x001f] [ 0.358017] pnp 00:02: [io 0x0081-0x0091] [ 0.358018] pnp 00:02: [io 0x0093-0x009f] [ 0.358019] pnp 00:02: [io 0x00c0-0x00df] [ 0.358020] pnp 00:02: [dma 4] [ 0.358032] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.358036] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.358047] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.358101] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.358112] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.358120] pnp 00:05: [io 0x002e-0x002f] [ 0.358121] pnp 00:05: [io 0x004e-0x004f] [ 0.358122] pnp 00:05: [io 0x0061] [ 0.358123] pnp 00:05: [io 0x0063] [ 0.358124] pnp 00:05: [io 0x0065] [ 0.358125] pnp 00:05: [io 0x0067] [ 0.358126] pnp 00:05: [io 0x0070] [ 0.358127] pnp 00:05: [io 0x0080] [ 0.358128] pnp 00:05: [io 0x0092] [ 0.358129] pnp 00:05: [io 0x00b2-0x00b3] [ 0.358130] pnp 00:05: [io 0x0680-0x069f] [ 0.358131] pnp 00:05: [io 0x1000-0x100f] [ 0.358131] pnp 00:05: [io 0xffff] [ 0.358132] pnp 00:05: [io 0xffff] [ 0.358133] pnp 00:05: [io 0x0400-0x0453] [ 0.358135] pnp 00:05: [io 0x0458-0x047f] [ 0.358136] pnp 00:05: [io 0x0500-0x057f] [ 0.358137] pnp 00:05: [io 0x164e-0x164f] [ 0.358157] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.358158] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.358159] system 00:05: [io 0xffff] has been reserved [ 0.358160] system 00:05: [io 0xffff] has been reserved [ 0.358162] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.358163] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.358164] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.358165] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.358167] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.358172] pnp 00:06: [io 0x0070-0x0077] [ 0.358177] pnp 00:06: [irq 8] [ 0.358188] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.358204] pnp 00:07: [io 0x0454-0x0457] [ 0.358222] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.358223] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.358278] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.358279] pnp 00:08: [io 0x0a30-0x0a3f] [ 0.358280] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.358281] pnp 00:08: [io 0x0250-0x025f] [ 0.358298] system 00:08: [io 0x0a30-0x0a3f] has been reserved [ 0.358299] system 00:08: [io 0x0250-0x025f] has been reserved [ 0.358301] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.358337] pnp 00:09: [io 0x0010-0x001f] [ 0.358338] pnp 00:09: [io 0x0022-0x003f] [ 0.358339] pnp 00:09: [io 0x0044-0x005f] [ 0.358340] pnp 00:09: [io 0x0062-0x0063] [ 0.358341] pnp 00:09: [io 0x0065-0x006f] [ 0.358342] pnp 00:09: [io 0x0072-0x007f] [ 0.358343] pnp 00:09: [io 0x0080] [ 0.358344] pnp 00:09: [io 0x0084-0x0086] [ 0.358345] pnp 00:09: [io 0x0088] [ 0.358346] pnp 00:09: [io 0x008c-0x008e] [ 0.358347] pnp 00:09: [io 0x0090-0x009f] [ 0.358348] pnp 00:09: [io 0x00a2-0x00bf] [ 0.358349] pnp 00:09: [io 0x00e0-0x00ef] [ 0.358350] pnp 00:09: [io 0x04d0-0x04d1] [ 0.358370] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.358372] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.358377] pnp 00:0a: [io 0x00f0-0x00ff] [ 0.358384] pnp 00:0a: [irq 13] [ 0.358395] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.358571] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff] [ 0.358572] pnp 00:0b: [mem 0xfed10000-0xfed17fff] [ 0.358573] pnp 00:0b: [mem 0xfed18000-0xfed18fff] [ 0.358574] pnp 00:0b: [mem 0xfed19000-0xfed19fff] [ 0.358575] pnp 00:0b: [mem 0xf8000000-0xfbffffff] [ 0.358576] pnp 00:0b: [mem 0xfed20000-0xfed3ffff] [ 0.358577] pnp 00:0b: [mem 0xfed90000-0xfed93fff] [ 0.358578] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] [ 0.358579] pnp 00:0b: [mem 0xff000000-0xffffffff] [ 0.358580] pnp 00:0b: [mem 0xfee00000-0xfeefffff] [ 0.358581] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff] [ 0.358612] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.358614] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.358615] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.358616] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.358617] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.358619] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.358620] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.358621] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.358622] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.358624] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.358625] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.358626] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.358735] pnp 00:0c: [mem 0x20000000-0x201fffff] [ 0.358736] pnp 00:0c: [mem 0x40004000-0x40004fff] [ 0.358768] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 0.358770] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved [ 0.358771] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.358786] pnp: PnP ACPI: found 13 devices [ 0.358787] ACPI: ACPI bus type pnp unregistered [ 0.394097] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.394101] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.394116] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.394117] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.394121] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.394141] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.394143] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.394148] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.394180] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.394181] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.394182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.394183] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.394184] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.394186] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.394187] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.394188] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.394189] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.394190] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 0.394191] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.394192] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.394194] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.394195] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.394210] NET: Registered protocol family 2 [ 0.394290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.394412] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.394465] TCP: Hash tables configured (established 131072 bind 65536) [ 0.394471] TCP: reno registered [ 0.394472] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.394474] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.394502] NET: Registered protocol family 1 [ 0.394508] pci 0000:00:02.0: Boot video device [ 0.427557] PCI: CLS 64 bytes, default 64 [ 0.427597] Unpacking initramfs... [ 0.727363] Freeing initrd memory: 25808k freed [ 0.729843] audit: initializing netlink socket (disabled) [ 0.729851] type=2000 audit(1350209638.626:1): initialized [ 0.740589] bounce pool size: 64 pages [ 0.740592] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.741410] VFS: Disk quotas dquot_6.5.2 [ 0.741436] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.741567] msgmni has been set to 1698 [ 0.741692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.741708] io scheduler noop registered [ 0.741709] io scheduler deadline registered [ 0.741713] io scheduler cfq registered (default) [ 0.741775] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.741960] intel_idle: MWAIT substates: 0x1120 [ 0.741961] intel_idle: v0.4 model 0x3A [ 0.741962] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.744699] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.745065] Non-volatile memory driver v1.3 [ 0.745066] Linux agpgart interface v0.103 [ 0.745139] ahci 0000:00:1f.2: version 3.0 [ 0.745175] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.745197] ahci: SSS flag set, parallel bus scan disabled [ 0.756610] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode [ 0.756614] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.756622] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.770128] scsi0 : ahci [ 0.770164] scsi1 : ahci [ 0.770196] scsi2 : ahci [ 0.770225] scsi3 : ahci [ 0.770254] scsi4 : ahci [ 0.770281] scsi5 : ahci [ 0.770304] ata1: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32100 irq 41 [ 0.770306] ata2: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32180 irq 41 [ 0.770307] ata3: DUMMY [ 0.770308] ata4: DUMMY [ 0.770308] ata5: DUMMY [ 0.770311] ata6: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32380 irq 41 [ 0.770348] libphy: Fixed MDIO Bus: probed [ 0.770350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.770368] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.770371] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.770375] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.774266] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.774273] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 0.774284] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d34000 [ 0.783181] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.783201] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.783203] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.783205] usb usb1: Product: EHCI Host Controller [ 0.783208] usb usb1: Manufacturer: Linux 3.6.2 ehci_hcd [ 0.783210] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.783288] hub 1-0:1.0: USB hub found [ 0.783290] hub 1-0:1.0: 2 ports detected [ 0.783334] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.783336] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.783339] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.787228] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.787234] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 0.787244] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d33000 [ 0.796478] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.796492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.796494] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.796496] usb usb2: Product: EHCI Host Controller [ 0.796499] usb usb2: Manufacturer: Linux 3.6.2 ehci_hcd [ 0.796501] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.796568] hub 2-0:1.0: USB hub found [ 0.796569] hub 2-0:1.0: 2 ports detected [ 0.796602] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.796609] uhci_hcd: USB Universal Host Controller Interface driver [ 0.796616] Initializing USB Mass Storage driver... [ 0.796625] usbcore: registered new interface driver usb-storage [ 0.796626] USB Mass Storage support registered. [ 0.796629] usbcore: registered new interface driver ums-alauda [ 0.796632] usbcore: registered new interface driver ums-cypress [ 0.796636] usbcore: registered new interface driver ums-datafab [ 0.796639] usbcore: registered new interface driver ums-freecom [ 0.796642] usbcore: registered new interface driver ums-isd200 [ 0.796645] usbcore: registered new interface driver ums-jumpshot [ 0.796648] usbcore: registered new interface driver ums-karma [ 0.796650] usbcore: registered new interface driver ums-onetouch [ 0.796653] usbcore: registered new interface driver ums-sddr09 [ 0.796656] usbcore: registered new interface driver ums-sddr55 [ 0.796659] usbcore: registered new interface driver ums-usbat [ 0.796681] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.799239] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.799245] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.799288] mousedev: PS/2 mouse device common for all mice [ 0.799336] rtc_cmos 00:06: RTC can wake from S4 [ 0.799433] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.799461] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.799497] cpuidle: using governor ladder [ 0.799578] usbcore: registered new interface driver usbhid [ 0.799579] usbhid: USB HID core driver [ 0.799656] ashmem: initialized [ 0.799731] TCP: cubic registered [ 0.799795] NET: Registered protocol family 10 [ 0.799886] lib80211: common routines for IEEE802.11 drivers [ 0.799887] lib80211_crypt: registered algorithm 'NULL' [ 0.799891] Key type dns_resolver registered [ 0.799893] Key type ceph registered [ 0.799896] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 0.800026] Using IPI No-Shortcut mode [ 0.800137] registered taskstats version 1 [ 0.800435] Magic number: 0:304:224 [ 0.800513] rtc_cmos 00:06: setting system clock to 2012-10-14 10:13:59 UTC (1350209639) [ 1.089004] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.089014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.098250] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.098255] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.098258] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.101014] ata1.00: ATAPI: HL-DT-ST BDDVDRW UH12LS29, 1.00, max UDMA/133 [ 1.106053] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.106058] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.106061] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.108807] ata1.00: configured for UDMA/133 [ 1.127630] scsi 0:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12LS29 1.00 PQ: 0 ANSI: 5 [ 1.212325] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.212329] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.212600] hub 1-1:1.0: USB hub found [ 1.212728] hub 1-1:1.0: 6 ports detected [ 1.318331] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.441665] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.441669] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.441945] hub 2-1:1.0: USB hub found [ 1.442073] hub 2-1:1.0: 8 ports detected [ 1.444641] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.446013] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.446017] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.446020] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.456431] ata2.00: ATA-9: INTEL SSDSC2CW060A3, 400i, max UDMA/133 [ 1.456436] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.465971] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.465977] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.465980] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.476387] ata2.00: configured for UDMA/133 [ 1.476563] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CW06 400i PQ: 0 ANSI: 5 [ 1.127876] ACPI: Invalid Power Resource to register! [ 1.476754] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.476971] sd 1:0:0:0: [sda] Write Protect is off [ 1.476973] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.477042] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.477603] sda: sda1 sda2 sda3 sda4 [ 1.478087] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.521223] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd [ 1.607602] usb 1-1.2: New USB device found, idVendor=0846, idProduct=9011 [ 1.607606] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.607609] usb 1-1.2: Product: Remote Download Wireless Adapter [ 1.607611] usb 1-1.2: Manufacturer: Broadcom [ 1.607613] usb 1-1.2: SerialNumber: 0 [ 1.707310] usb 2-1.6: new full-speed USB device number 3 using ehci_hcd [ 1.727156] tsc: Refined TSC clocksource calibration: 3392.304 MHz [ 1.727162] Switching to clocksource tsc [ 1.793648] ata6: SATA link down (SStatus 0 SControl 300) [ 1.793775] usb 2-1.6: New USB device found, idVendor=19ff, idProduct=0231 [ 1.793777] usb 2-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.793779] usb 2-1.6: Product: Dynex wireless combo [ 1.793784] Freeing unused kernel memory: 452k freed [ 1.816507] emc: device handler registered [ 1.817410] rdac: device handler registered [ 1.818320] alua: device handler registered [ 1.819179] hp_sw: device handler registered [ 1.821576] udevd[118]: starting version 182 [ 1.826651] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.826867] ACPI: Power Button [PWRB] [ 1.826899] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.826919] ACPI: Power Button [PWRF] [ 1.831800] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.831807] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.831810] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.831895] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.831902] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d20000 [ 1.831945] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 1.831990] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.831992] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.831993] usb usb3: Product: xHCI Host Controller [ 1.831994] usb usb3: Manufacturer: Linux 3.6.2 xhci_hcd [ 1.831995] usb usb3: SerialNumber: 0000:00:14.0 [ 1.833291] [drm] Initialized drm 1.1.0 20060810 [ 1.835925] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input2 [ 1.836052] hid-generic 0003:19FF:0231.0001: input,hidraw0: USB HID v1.11 Keyboard [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input0 [ 1.836173] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input3 [ 1.836327] hid-generic 0003:19FF:0231.0002: input,hidraw1: USB HID v1.11 Mouse [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input1 [ 1.837729] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module. [ 1.837788] DRM: Fill_in_dev failed. [ 1.846940] xHCI xhci_add_endpoint called for root hub [ 1.846941] xHCI xhci_check_bandwidth called for root hub [ 1.846964] hub 3-0:1.0: USB hub found [ 1.846973] hub 3-0:1.0: 4 ports detected [ 1.847015] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.847017] ACPI: Thermal Zone [TZ00] (28 C) [ 1.847029] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.847031] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.847053] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.847054] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.847055] usb usb4: Product: xHCI Host Controller [ 1.847056] usb usb4: Manufacturer: Linux 3.6.2 xhci_hcd [ 1.847057] usb usb4: SerialNumber: 0000:00:14.0 [ 1.847551] xHCI xhci_add_endpoint called for root hub [ 1.847553] xHCI xhci_check_bandwidth called for root hub [ 1.847609] hub 4-0:1.0: USB hub found [ 1.847619] hub 4-0:1.0: 4 ports detected [ 1.847906] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.847907] ACPI: Thermal Zone [TZ01] (30 C) [ 1.848033] ACPI: Fan [FAN0] (off) [ 1.848059] ACPI: Fan [FAN1] (off) [ 1.848083] ACPI: Fan [FAN2] (off) [ 1.848103] ACPI: Fan [FAN3] (off) [ 1.848121] ACPI: Fan [FAN4] (off) [ 1.925224] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 1.939850] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr [ 2.211449] systemd-readahead-replay[270]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day. [ 2.608192] udevd[303]: starting version 182 [ 2.672420] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12 [ 2.711815] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12 [ 2.712101] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12 [ 2.712310] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12 [ 2.712607] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 2.797184] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 2.806840] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr [ 3.055851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.056329] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.056892] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 3.056893] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 3.056917] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.056959] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.056989] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 3.070946] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 3.072117] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 3.072258] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.082008] kvm: disabled by bios [ 3.086166] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.086168] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.086230] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.214386] Adding 4193276k swap on /dev/sda3. Priority:-1 extents:1 across:4193276k SS [ 3.310623] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) e8:40:f2:05:f1:85 [ 3.310625] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.310671] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 1.476804] ACPI: Invalid Power Resource to register! [ 3.310749] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251) [ 3.310753] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.310756] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251) [ 3.310758] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.310759] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.310783] ACPI Warning: 0x0000f040-0x0000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251) [ 3.310786] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.330792] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 4.402935] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4.509282] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4.509376] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.750895] RPC: Registered named UNIX socket transport module. [ 4.750897] RPC: Registered udp transport module. [ 4.750898] RPC: Registered tcp transport module. [ 4.750899] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.753198] FS-Cache: Loaded [ 4.756182] FS-Cache: Netfs 'nfs' registered for caching [ 5.345150] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr,commit=0 [ 5.347663] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0 [ 6.128311] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 6.128315] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 6.128350] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [Intel-gfx] Intel graphics drm issue? 2012-10-14 14:19 ` Mark Hounschell @ 2012-10-14 14:40 ` Daniel Vetter 2012-10-14 15:41 ` Mark Hounschell 0 siblings, 1 reply; 25+ messages in thread From: Daniel Vetter @ 2012-10-14 14:40 UTC (permalink / raw) To: dmarkh; +Cc: markh, Bruno Prémont, Intel Graphics Development, linux-kernel On Sun, Oct 14, 2012 at 4:19 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: > OK. Applied to 3.6.2. The dmesg is attached. The message did not show up. > I'll be here most of the day. Ok, that at least confirms my suspicion (and yeah, I've mis-remembered when I've merged the agp removal for gen6+, it's already all done in 3.6). But I have no idea how that could fail this way. New little debug patch: diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index a24ffbe..7ec35c5 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -848,6 +848,11 @@ i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; } + printk("force-disabling agp on gen %i, is_ivybridge %i\n", + intel_info->gen, intel_info->is_ivybridge); + + driver.driver_features &= + ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP); return drm_get_pci_dev(pdev, ent, &driver); } Yours, Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [Intel-gfx] Intel graphics drm issue? 2012-10-14 14:40 ` Daniel Vetter @ 2012-10-14 15:41 ` Mark Hounschell 2012-10-14 15:53 ` Daniel Vetter 0 siblings, 1 reply; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 15:41 UTC (permalink / raw) To: Daniel Vetter Cc: markh, Bruno Prémont, Intel Graphics Development, linux-kernel [-- Attachment #1: Type: text/plain, Size: 7029 bytes --] On 10/14/2012 10:40 AM, Daniel Vetter wrote: > On Sun, Oct 14, 2012 at 4:19 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: >> OK. Applied to 3.6.2. The dmesg is attached. The message did not show up. >> I'll be here most of the day. > > Ok, that at least confirms my suspicion (and yeah, I've mis-remembered > when I've merged the agp removal for gen6+, it's already all done in > 3.6). But I have no idea how that could fail this way. New little > debug patch: > > diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c > index a24ffbe..7ec35c5 100644 > --- a/drivers/gpu/drm/i915/i915_drv.c > +++ b/drivers/gpu/drm/i915/i915_drv.c > @@ -848,6 +848,11 @@ i915_pci_probe(struct pci_dev *pdev, const struct > pci_device_id *ent) > return -ENODEV; > } > > + printk("force-disabling agp on gen %i, is_ivybridge %i\n", > + intel_info->gen, intel_info->is_ivybridge); > + > + driver.driver_features &= > + ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP); > return drm_get_pci_dev(pdev, ent, &driver); > } > > Yours, Daniel > There is something amiss. Here is my i915_pci_probe routine. I Added a couple more printks. NONE of these show up in dmesg. Not even the "Entered" printk. ???? static int __devinit i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct intel_device_info *intel_info = (struct intel_device_info *) ent->driver_data; printk("i915_pci_probe: Entered\n"); /* Only bind to function 0 of the device. Early generations * used function 1 as a placeholder for multi-head. This causes * us confusion instead, especially on the systems where both * functions have the same PCI-ID! */ if (PCI_FUNC(pdev->devfn)) { printk("i915_pci_probe: returning -ENODEV\n"); return -ENODEV; } /* We've managed to ship a kms-enabled ddx that shipped with an XvMC * implementation for gen3 (and only gen3) that used legacy drm maps * (gasp!) to share buffers between X and the client. Hence we need to * keep around the fake agp stuff for gen3, even when kms is enabled. */ if (intel_info->gen != 3) { driver.driver_features &= ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP); printk("dropping agp requirement\n"); } else if (!intel_agp_enabled) { DRM_ERROR("drm/i915 can't work without intel_agp module!\n"); return -ENODEV; } printk("force-disabling agp on gen %i, is_ivybridge %i\n", intel_info->gen, intel_info->is_ivybridge); driver.driver_features &= ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP); return drm_get_pci_dev(pdev, ent, &driver); } I see the i915 module loaded: # lsmod Module Size Used by nfs 126282 0 fscache 42769 1 nfs lockd 55498 1 nfs sunrpc 171138 3 nfs,lockd coretemp 5417 0 snd_virtuoso 28165 1 snd_oxygen_lib 28848 1 snd_virtuoso snd_pcm 78139 1 snd_oxygen_lib snd_page_alloc 6840 1 snd_pcm snd_mpu401_uart 5637 1 snd_oxygen_lib snd_rawmidi 18374 1 snd_mpu401_uart snd_seq 46978 0 kvm 241365 0 snd_timer 17410 2 snd_pcm,snd_seq snd_seq_device 5569 2 snd_rawmidi,snd_seq crc32c_intel 1481 0 aesni_intel 8188 0 ablk_helper 2217 1 aesni_intel cryptd 8236 1 ablk_helper aes_i586 7256 1 aesni_intel pcspkr 1458 0 serio_raw 4359 0 snd 58892 10 snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device joydev 7748 0 sg 24563 0 i2c_i801 11132 0 sr_mod 12084 0 cdrom 32115 1 sr_mod soundcore 5895 1 snd e1000e 199196 0 shpchp 23210 0 pci_hotplug 23417 1 shpchp lpc_ich 9465 0 edd 7067 0 microcode 11485 0 autofs4 26390 2 ext4 282110 2 jbd2 57523 1 ext4 crc16 1327 1 ext4 i915 420514 0 drm_kms_helper 28021 1 i915 hid_generic 761 0 drm 208515 2 i915,drm_kms_helper xhci_hcd 117932 0 i2c_algo_bit 4973 1 i915 fan 2287 0 thermal 8404 0 button 4550 1 i915 video 11908 1 i915 scsi_dh_hp_sw 3480 0 scsi_dh_alua 6493 0 scsi_dh_rdac 6764 0 scsi_dh_emc 6481 0 scsi_dh 5432 4 scsi_dh_hp_sw,scsi_dh_alua,scsi_dh_rdac,scsi_dh_emc # lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 [8086:1e1e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC Controller [8086:1e4a] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge [10b5:8112] (rev aa) 02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788] dmesg ad config file attached: ?????? Mark [-- Attachment #2: kernel_config --] [-- Type: text/plain, Size: 125263 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/i386 3.6.2 Kernel Configuration # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y # CONFIG_NEED_DMA_MAP_STATE is not set CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_CPU_AUTOPROBE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_ZONE_DMA32 is not set # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y CONFIG_X86_32_LAZY_GS=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" CONFIG_ARCH_CPU_PROBE_RELEASE=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_HAVE_IRQ_WORK=y CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y # CONFIG_KERNEL_GZIP is not set CONFIG_KERNEL_BZIP2=y # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_FHANDLE=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_WATCH=y CONFIG_AUDIT_TREE=y # CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set CONFIG_HAVE_GENERIC_HARDIRQS=y # # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y # CONFIG_IRQ_DOMAIN_DEBUG is not set CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_KTIME_SCALAR=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y # # RCU Subsystem # CONFIG_TREE_PREEMPT_RCU=y CONFIG_PREEMPT_RCU=y CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_RCU_BOOST=y CONFIG_RCU_BOOST_PRIO=1 CONFIG_RCU_BOOST_DELAY=500 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CPUSETS is not set # CONFIG_CGROUP_CPUACCT is not set # CONFIG_RESOURCE_COUNTERS is not set # CONFIG_CGROUP_PERF is not set CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_CFS_BANDWIDTH is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_SCHED_AUTOGROUP=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EXPERT=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_OPROFILE=m # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP_FILTER=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_SYSV68_PARTITION=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_CFQ_GROUP_IOSCHED=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_PADATA=y # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set CONFIG_UNINLINE_SPIN_UNLOCK=y # CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set # CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set # CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_FREEZER=y # # Processor type and features # CONFIG_ZONE_DMA=y CONFIG_SMP=y CONFIG_X86_MPPARSE=y # CONFIG_X86_BIGSMP is not set # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y # CONFIG_X86_32_IRIS is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set # CONFIG_XEN_PRIVILEGED_GUEST is not set CONFIG_KVM_CLOCK=y CONFIG_KVM_GUEST=y # CONFIG_LGUEST_GUEST is not set CONFIG_PARAVIRT=y # CONFIG_PARAVIRT_SPINLOCKS is not set CONFIG_PARAVIRT_CLOCK=y # CONFIG_PARAVIRT_DEBUG is not set CONFIG_NO_BOOTMEM=y CONFIG_MEMTEST=y # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MELAN is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set CONFIG_MCORE2=y # CONFIG_MATOM is not set CONFIG_X86_GENERIC=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=5 CONFIG_X86_DEBUGCTLMSR=y CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y # CONFIG_IOMMU_HELPER is not set CONFIG_NR_CPUS=8 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_IRQ_TIME_ACCOUNTING is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_COUNT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_X86_ANCIENT_MCE is not set CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_X86_REBOOTFIXUPS=y CONFIG_MICROCODE=m CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=m # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_3G_OPT is not set # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_2G_OPT is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set # CONFIG_ARCH_DMA_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_MEMORY_ISOLATION=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_COMPACTION=y CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y CONFIG_HWPOISON_INJECT=m CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_CLEANCACHE=y # CONFIG_FRONTSWAP is not set CONFIG_HIGHPTE=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW=64 # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_EFI=y # CONFIG_EFI_STUB is not set CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_300=y # CONFIG_HZ_1000 is not set CONFIG_HZ=300 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y # CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x200000 CONFIG_RELOCATABLE=y CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATE_CALLBACKS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y # CONFIG_PM_AUTOSLEEP is not set # CONFIG_PM_WAKELOCKS is not set CONFIG_PM_RUNTIME=y CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_PM_ADVANCED_DEBUG=y # CONFIG_PM_TEST_SUSPEND is not set CONFIG_PM_SLEEP_DEBUG=y CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_EC_DEBUGFS=m CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_IPMI=m CONFIG_ACPI_HOTPLUG_CPU=y # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set CONFIG_ACPI_THERMAL=m CONFIG_ACPI_CUSTOM_DSDT_FILE="" # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_DEBUG=y # CONFIG_ACPI_DEBUG_FUNC_TRACE is not set CONFIG_ACPI_PCI_SLOT=m CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y CONFIG_ACPI_SBS=m CONFIG_ACPI_HED=m CONFIG_ACPI_CUSTOM_METHOD=m CONFIG_ACPI_BGRT=m # CONFIG_ACPI_APEI is not set # CONFIG_SFI is not set CONFIG_X86_APM_BOOT=y CONFIG_APM=m # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_ALLOW_INTS is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set CONFIG_INTEL_IDLE=y # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_CNB20LE_QUIRK=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set CONFIG_PCIEAER_INJECT=m CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set # CONFIG_PCIEASPM_DEFAULT is not set # CONFIG_PCIEASPM_POWERSAVE is not set CONFIG_PCIEASPM_PERFORMANCE=y CONFIG_PCIE_PME=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set CONFIG_PCI_STUB=y CONFIG_HT_IRQ=y CONFIG_PCI_ATS=y CONFIG_PCI_IOV=y # CONFIG_PCI_PRI is not set # CONFIG_PCI_PASID is not set CONFIG_PCI_IOAPIC=y CONFIG_PCI_LABEL=y CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set CONFIG_SCx200=m CONFIG_SCx200HR_TIMER=m # CONFIG_OLPC is not set # CONFIG_ALIX is not set # CONFIG_NET5501 is not set # CONFIG_GEOS is not set CONFIG_AMD_NB=y CONFIG_PCCARD=m CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y CONFIG_PD6729=m CONFIG_I82092=m CONFIG_PCCARD_NONSTATIC=y CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_FAKE=m CONFIG_HOTPLUG_PCI_COMPAQ=m CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y CONFIG_HOTPLUG_PCI_IBM=m CONFIG_HOTPLUG_PCI_ACPI=m CONFIG_HOTPLUG_PCI_ACPI_IBM=m CONFIG_HOTPLUG_PCI_CPCI=y CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m CONFIG_HOTPLUG_PCI_SHPC=m CONFIG_RAPIDIO=y # CONFIG_RAPIDIO_TSI721 is not set CONFIG_RAPIDIO_DISC_TIMEOUT=30 # CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set # CONFIG_RAPIDIO_DMA_ENGINE is not set # CONFIG_RAPIDIO_DEBUG is not set # CONFIG_RAPIDIO_TSI57X is not set # CONFIG_RAPIDIO_CPS_XX is not set # CONFIG_RAPIDIO_TSI568 is not set # CONFIG_RAPIDIO_CPS_GEN2 is not set # CONFIG_RAPIDIO_TSI500 is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_HAVE_TEXT_POKE_SMP=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=m CONFIG_UNIX=y CONFIG_UNIX_DIAG=m CONFIG_XFRM=y CONFIG_XFRM_ALGO=m CONFIG_XFRM_USER=m CONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y # CONFIG_IP_FIB_TRIE_STATS is not set CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_ROUTE_CLASSID=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m CONFIG_INET_UDP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y # CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y # CONFIG_IPV6_MROUTE is not set CONFIG_NETLABEL=y CONFIG_NETWORK_SECMARK=y # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_ACCT=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_ZONES=y CONFIG_NF_CONNTRACK_PROCFS=y CONFIG_NF_CONNTRACK_EVENTS=y # CONFIG_NF_CONNTRACK_TIMEOUT is not set CONFIG_NF_CONNTRACK_TIMESTAMP=y CONFIG_NF_CT_PROTO_DCCP=m CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_BROADCAST=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m # CONFIG_NF_CT_NETLINK_TIMEOUT is not set # CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m # # Xtables combined modules # CONFIG_NETFILTER_XT_MARK=m CONFIG_NETFILTER_XT_CONNMARK=m CONFIG_NETFILTER_XT_SET=m # # Xtables targets # CONFIG_NETFILTER_XT_TARGET_AUDIT=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_CT=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_HMARK=m CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m # # Xtables matches # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_CPU=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ECN=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_IPVS=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_NFACCT=m CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_IP_SET=m CONFIG_IP_SET_MAX=256 CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m CONFIG_IP_SET_HASH_NET=m CONFIG_IP_SET_HASH_NETPORT=m CONFIG_IP_SET_HASH_NETIFACE=m CONFIG_IP_SET_LIST_SET=m CONFIG_IP_VS=m CONFIG_IP_VS_IPV6=y # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_AH_ESP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y CONFIG_IP_VS_PROTO_SCTP=y # # IPVS scheduler # CONFIG_IP_VS_RR=m CONFIG_IP_VS_WRR=m CONFIG_IP_VS_LC=m CONFIG_IP_VS_WLC=m CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m # # IPVS SH scheduler # CONFIG_IP_VS_SH_TAB_BITS=8 # # IPVS application helper # CONFIG_IP_VS_FTP=m CONFIG_IP_VS_NFCT=y CONFIG_IP_VS_PE_SIP=m # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_DCCP=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_UDPLITE=m CONFIG_NF_NAT_PROTO_SCTP=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m CONFIG_NF_NAT_AMANDA=m CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV6=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m # # DECnet: Netfilter Configuration # # CONFIG_DECNET_NF_GRABULATOR is not set CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m CONFIG_BRIDGE_EBT_IP6=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_BRIDGE_EBT_ARPREPLY=m CONFIG_BRIDGE_EBT_DNAT=m CONFIG_BRIDGE_EBT_MARK_T=m CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_ULOG=m CONFIG_BRIDGE_EBT_NFLOG=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m # # DCCP CCIDs Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=y # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_TFRC_LIB=y # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set # CONFIG_NET_DCCPPROBE is not set CONFIG_IP_SCTP=m CONFIG_NET_SCTPPROBE=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y CONFIG_RDS=m CONFIG_RDS_RDMA=m CONFIG_RDS_TCP=m # CONFIG_RDS_DEBUG is not set # CONFIG_TIPC is not set CONFIG_ATM=m CONFIG_ATM_CLIP=m # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=m CONFIG_L2TP_DEBUGFS=m CONFIG_L2TP_V3=y CONFIG_L2TP_IP=m CONFIG_L2TP_ETH=m CONFIG_STP=m CONFIG_GARP=m CONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_NET_DSA=y CONFIG_NET_DSA_TAG_DSA=y CONFIG_NET_DSA_TAG_EDSA=y CONFIG_NET_DSA_TAG_TRAILER=y CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_DECNET=m # CONFIG_DECNET_ROUTER is not set CONFIG_LLC=m CONFIG_LLC2=m CONFIG_IPX=m CONFIG_IPX_INTERN=y CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y CONFIG_X25=m CONFIG_LAPB=m CONFIG_WAN_ROUTER=m CONFIG_PHONET=m CONFIG_IEEE802154=m CONFIG_IEEE802154_6LOWPAN=m CONFIG_MAC802154=m CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_MULTIQ=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFB=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_DRR=m CONFIG_NET_SCH_MQPRIO=m CONFIG_NET_SCH_CHOKE=m CONFIG_NET_SCH_QFQ=m CONFIG_NET_SCH_CODEL=m CONFIG_NET_SCH_FQ_CODEL=m CONFIG_NET_SCH_INGRESS=m CONFIG_NET_SCH_PLUG=m # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_FLOW=m CONFIG_NET_CLS_CGROUP=y CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=m CONFIG_NET_EMATCH_NBYTE=m CONFIG_NET_EMATCH_U32=m CONFIG_NET_EMATCH_META=m CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_EMATCH_CANID=m CONFIG_NET_EMATCH_IPSET=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=m CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m CONFIG_NET_ACT_IPT=m CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_BLA=y CONFIG_BATMAN_ADV_DEBUG=y CONFIG_OPENVSWITCH=m CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y CONFIG_NETPRIO_CGROUP=m CONFIG_BQL=y # # Network testing # CONFIG_NET_PKTGEN=m CONFIG_NET_TCPPROBE=m CONFIG_HAMRADIO=y # # Packet Radio protocols # CONFIG_AX25=m CONFIG_AX25_DAMA_SLAVE=y CONFIG_NETROM=m CONFIG_ROSE=m # # AX.25 network device drivers # CONFIG_MKISS=m CONFIG_6PACK=m CONFIG_BPQETHER=m CONFIG_BAYCOM_SER_FDX=m CONFIG_BAYCOM_SER_HDX=m CONFIG_BAYCOM_PAR=m CONFIG_BAYCOM_EPP=m CONFIG_YAM=m CONFIG_CAN=m CONFIG_CAN_RAW=m CONFIG_CAN_BCM=m CONFIG_CAN_GW=m # # CAN Device Drivers # CONFIG_CAN_VCAN=m CONFIG_CAN_SLCAN=m CONFIG_CAN_DEV=m CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_MCP251X=m CONFIG_CAN_JANZ_ICAN3=m CONFIG_PCH_CAN=m CONFIG_CAN_SJA1000=m # CONFIG_CAN_SJA1000_ISA is not set CONFIG_CAN_SJA1000_PLATFORM=m CONFIG_CAN_EMS_PCMCIA=m CONFIG_CAN_EMS_PCI=m CONFIG_CAN_PEAK_PCMCIA=m CONFIG_CAN_PEAK_PCI=m CONFIG_CAN_PEAK_PCIEC=y CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PLX_PCI=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_CAN_C_CAN_PCI=m CONFIG_CAN_CC770=m CONFIG_CAN_CC770_ISA=m CONFIG_CAN_CC770_PLATFORM=m # # CAN USB interfaces # CONFIG_CAN_EMS_USB=m # CONFIG_CAN_ESD_USB2 is not set CONFIG_CAN_PEAK_USB=m CONFIG_CAN_SOFTING=m CONFIG_CAN_SOFTING_CS=m # CONFIG_CAN_DEBUG_DEVICES is not set CONFIG_IRDA=m # # IrDA protocols # CONFIG_IRLAN=m CONFIG_IRNET=m CONFIG_IRCOMM=m CONFIG_IRDA_ULTRA=y # # IrDA options # CONFIG_IRDA_CACHE_LAST_LSAP=y # CONFIG_IRDA_FAST_RR is not set # CONFIG_IRDA_DEBUG is not set # # Infrared-port device drivers # # # SIR device drivers # CONFIG_IRTTY_SIR=m # # Dongle support # CONFIG_DONGLE=y CONFIG_ESI_DONGLE=m CONFIG_ACTISYS_DONGLE=m CONFIG_TEKRAM_DONGLE=m CONFIG_TOIM3232_DONGLE=m CONFIG_LITELINK_DONGLE=m CONFIG_MA600_DONGLE=m CONFIG_GIRBIL_DONGLE=m CONFIG_MCP2120_DONGLE=m CONFIG_OLD_BELKIN_DONGLE=m CONFIG_ACT200L_DONGLE=m CONFIG_KINGSUN_DONGLE=m CONFIG_KSDAZZLE_DONGLE=m CONFIG_KS959_DONGLE=m # # FIR device drivers # CONFIG_USB_IRDA=m CONFIG_SIGMATEL_FIR=m CONFIG_NSC_FIR=m CONFIG_WINBOND_FIR=m CONFIG_TOSHIBA_FIR=m CONFIG_SMC_IRCC_FIR=m CONFIG_ALI_FIR=m CONFIG_VLSI_FIR=m CONFIG_VIA_FIR=m CONFIG_MCS_FIR=m CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m # # Bluetooth device drivers # CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_ATH3K=y CONFIG_BT_HCIUART_LL=y # CONFIG_BT_HCIUART_3WIRE is not set CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m CONFIG_BT_MRVL=m CONFIG_BT_MRVL_SDIO=m CONFIG_BT_ATH3K=m CONFIG_BT_WILINK=m CONFIG_AF_RXRPC=m # CONFIG_AF_RXRPC_DEBUG is not set CONFIG_RXKAD=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_WEXT_SPY=y CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m CONFIG_NL80211_TESTMODE=y # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set # CONFIG_CFG80211_INTERNAL_REGDB is not set CONFIG_CFG80211_WEXT=y CONFIG_LIB80211=y CONFIG_LIB80211_CRYPT_WEP=m CONFIG_LIB80211_CRYPT_CCMP=m CONFIG_LIB80211_CRYPT_TKIP=m # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y # CONFIG_MAC80211_RC_PID is not set CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y CONFIG_MAC80211_DEBUGFS=y # CONFIG_MAC80211_MESSAGE_TRACING is not set # CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_WIMAX=m CONFIG_WIMAX_DEBUG_LEVEL=8 CONFIG_RFKILL=m CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_REGULATOR=m CONFIG_NET_9P=m CONFIG_NET_9P_VIRTIO=m CONFIG_NET_9P_RDMA=m # CONFIG_NET_9P_DEBUG is not set CONFIG_CAIF=m # CONFIG_CAIF_DEBUG is not set CONFIG_CAIF_NETDEV=m CONFIG_CAIF_USB=m CONFIG_CEPH_LIB=y CONFIG_CEPH_LIB_PRETTYDEBUG=y # CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set CONFIG_NFC=m CONFIG_NFC_NCI=m CONFIG_NFC_HCI=m # CONFIG_NFC_SHDLC is not set # CONFIG_NFC_LLCP is not set # # Near Field Communication (NFC) devices # CONFIG_PN544_NFC=m CONFIG_NFC_PN533=m CONFIG_NFC_WILINK=m # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_REGMAP=y CONFIG_REGMAP_I2C=m CONFIG_REGMAP_SPI=y CONFIG_REGMAP_IRQ=y CONFIG_DMA_SHARED_BUFFER=y # CONFIG_CMA is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=m CONFIG_MTD_TESTS=m CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set CONFIG_MTD_AR7_PARTS=m # # User Modules And Translation Layers # CONFIG_MTD_CHAR=m CONFIG_HAVE_MTD_OTP=y CONFIG_MTD_BLKDEVS=m CONFIG_MTD_BLOCK=m CONFIG_MTD_BLOCK_RO=m CONFIG_FTL=m CONFIG_NFTL=m CONFIG_NFTL_RW=y CONFIG_INFTL=m CONFIG_RFD_FTL=m CONFIG_SSFDC=m # CONFIG_SM_FTL is not set CONFIG_MTD_OOPS=m CONFIG_MTD_SWAP=m # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=m CONFIG_MTD_JEDECPROBE=m CONFIG_MTD_GEN_PROBE=m CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_NOSWAP=y # CONFIG_MTD_CFI_BE_BYTE_SWAP is not set # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set CONFIG_MTD_CFI_GEOMETRY=y CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y CONFIG_MTD_MAP_BANK_WIDTH_8=y CONFIG_MTD_MAP_BANK_WIDTH_16=y CONFIG_MTD_MAP_BANK_WIDTH_32=y CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_I4=y CONFIG_MTD_CFI_I8=y CONFIG_MTD_OTP=y CONFIG_MTD_CFI_INTELEXT=m CONFIG_MTD_CFI_AMDSTD=m CONFIG_MTD_CFI_STAA=m CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=m CONFIG_MTD_ROM=m CONFIG_MTD_ABSENT=m # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=m CONFIG_MTD_PHYSMAP_COMPAT=y CONFIG_MTD_PHYSMAP_START=0x8000000 CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 CONFIG_MTD_SC520CDP=m CONFIG_MTD_NETSC520=m CONFIG_MTD_TS5500=m CONFIG_MTD_SBC_GXX=m CONFIG_MTD_SCx200_DOCFLASH=m CONFIG_MTD_AMD76XROM=m CONFIG_MTD_ICHXROM=m CONFIG_MTD_ESB2ROM=m CONFIG_MTD_CK804XROM=m CONFIG_MTD_SCB2_FLASH=m CONFIG_MTD_NETtel=m CONFIG_MTD_L440GX=m CONFIG_MTD_PCI=m CONFIG_MTD_PCMCIA=m # CONFIG_MTD_PCMCIA_ANONYMOUS is not set CONFIG_MTD_GPIO_ADDR=m CONFIG_MTD_INTEL_VR_NOR=m CONFIG_MTD_PLATRAM=m CONFIG_MTD_LATCH_ADDR=m # # Self-contained MTD device drivers # CONFIG_MTD_PMC551=m CONFIG_MTD_PMC551_BUGFIX=y # CONFIG_MTD_PMC551_DEBUG is not set CONFIG_MTD_DATAFLASH=m CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y CONFIG_MTD_DATAFLASH_OTP=y CONFIG_MTD_M25P80=m CONFIG_M25PXX_USE_FAST_READ=y CONFIG_MTD_SST25L=m CONFIG_MTD_SLRAM=m CONFIG_MTD_PHRAM=m CONFIG_MTD_MTDRAM=m CONFIG_MTDRAM_TOTAL_SIZE=4096 CONFIG_MTDRAM_ERASE_SIZE=128 CONFIG_MTD_BLOCK2MTD=m # # Disk-On-Chip Device Drivers # CONFIG_MTD_DOC2000=m CONFIG_MTD_DOC2001=m CONFIG_MTD_DOC2001PLUS=m CONFIG_MTD_DOCG3=m CONFIG_BCH_CONST_M=14 CONFIG_BCH_CONST_T=4 CONFIG_MTD_DOCPROBE=m CONFIG_MTD_DOCECC=m CONFIG_MTD_DOCPROBE_ADVANCED=y CONFIG_MTD_DOCPROBE_ADDRESS=0x0000 CONFIG_MTD_DOCPROBE_HIGH=y CONFIG_MTD_DOCPROBE_55AA=y CONFIG_MTD_NAND_ECC=m CONFIG_MTD_NAND_ECC_SMC=y CONFIG_MTD_NAND=m CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_BCH=m CONFIG_MTD_NAND_ECC_BCH=y CONFIG_MTD_SM_COMMON=m CONFIG_MTD_NAND_MUSEUM_IDS=y CONFIG_MTD_NAND_DENALI=m CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 CONFIG_MTD_NAND_IDS=m CONFIG_MTD_NAND_RICOH=m CONFIG_MTD_NAND_DISKONCHIP=m CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y CONFIG_MTD_NAND_DOCG4=m CONFIG_MTD_NAND_CAFE=m CONFIG_MTD_NAND_CS553X=m CONFIG_MTD_NAND_NANDSIM=m CONFIG_MTD_NAND_PLATFORM=m CONFIG_MTD_ALAUDA=m CONFIG_MTD_ONENAND=m CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=m CONFIG_MTD_ONENAND_OTP=y CONFIG_MTD_ONENAND_2X_PROGRAM=y CONFIG_MTD_ONENAND_SIM=m # # LPDDR flash memory drivers # CONFIG_MTD_LPDDR=m CONFIG_MTD_QINFO_PROBE=m CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 CONFIG_MTD_UBI_GLUEBI=m CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_PC_SUPERIO=y CONFIG_PARPORT_PC_PCMCIA=m # CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_AX88796=m CONFIG_PARPORT_1284=y CONFIG_PARPORT_NOT_PC=y CONFIG_PNP=y # CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m CONFIG_PARIDE=m # # Parallel IDE high-level drivers # CONFIG_PARIDE_PD=m CONFIG_PARIDE_PCD=m CONFIG_PARIDE_PF=m CONFIG_PARIDE_PT=m CONFIG_PARIDE_PG=m # # Parallel IDE protocol modules # CONFIG_PARIDE_ATEN=m CONFIG_PARIDE_BPCK=m CONFIG_PARIDE_BPCK6=m CONFIG_PARIDE_COMM=m CONFIG_PARIDE_DSTR=m CONFIG_PARIDE_FIT2=m CONFIG_PARIDE_FIT3=m CONFIG_PARIDE_EPAT=m CONFIG_PARIDE_EPATC8=y CONFIG_PARIDE_EPIA=m CONFIG_PARIDE_FRIQ=m CONFIG_PARIDE_FRPW=m CONFIG_PARIDE_KBIC=m CONFIG_PARIDE_KTTI=m CONFIG_PARIDE_ON20=m CONFIG_PARIDE_ON26=m CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m CONFIG_CISS_SCSI_TAPE=y CONFIG_BLK_DEV_DAC960=m CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_DRBD=m # CONFIG_DRBD_FAULT_INJECTION is not set CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_NVME=m CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_SX8=m # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_BLK_DEV_XIP=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y CONFIG_ATA_OVER_ETH=m CONFIG_VIRTIO_BLK=m # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_RBD=m # # Misc devices # CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m CONFIG_AD525X_DPOT_SPI=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m CONFIG_INTEL_MID_PTI=m CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m CONFIG_ENCLOSURE_SERVICES=m CONFIG_CS5535_MFGPT=m CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7 CONFIG_CS5535_CLOCK_EVENT_SRC=m CONFIG_HP_ILO=m CONFIG_APDS9802ALS=m # CONFIG_ISL29003 is not set CONFIG_ISL29020=m CONFIG_SENSORS_TSL2550=m CONFIG_SENSORS_BH1780=m CONFIG_SENSORS_BH1770=m CONFIG_SENSORS_APDS990X=m CONFIG_HMC6352=m CONFIG_DS1682=m CONFIG_TI_DAC7512=m CONFIG_VMWARE_BALLOON=m CONFIG_BMP085=y CONFIG_BMP085_I2C=m CONFIG_BMP085_SPI=m CONFIG_PCH_PHUB=m CONFIG_USB_SWITCH_FSA9480=m CONFIG_C2PORT=m CONFIG_C2PORT_DURAMAR_2150=m # # EEPROM support # CONFIG_EEPROM_AT24=m CONFIG_EEPROM_AT25=m CONFIG_EEPROM_LEGACY=m CONFIG_EEPROM_MAX6875=m CONFIG_EEPROM_93CX6=m CONFIG_EEPROM_93XX46=m CONFIG_CB710_CORE=m # CONFIG_CB710_DEBUG is not set CONFIG_CB710_DEBUG_ASSUMPTIONS=y # # Texas Instruments shared transport line discipline # CONFIG_TI_ST=m CONFIG_SENSORS_LIS3_I2C=m # # Altera FPGA firmware download module # CONFIG_ALTERA_STAPL=m CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SCSI_CXGB3_ISCSI=m CONFIG_SCSI_CXGB4_ISCSI=m CONFIG_SCSI_BNX2_ISCSI=m CONFIG_SCSI_BNX2X_FCOE=m CONFIG_BE2ISCSI=m CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_HPSA=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_3W_SAS=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=5000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 CONFIG_AIC79XX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set CONFIG_SCSI_MVSAS=m # CONFIG_SCSI_MVSAS_DEBUG is not set # CONFIG_SCSI_MVSAS_TASKLET is not set CONFIG_SCSI_MVUMI=m CONFIG_SCSI_DPT_I2O=m CONFIG_SCSI_ADVANSYS=m CONFIG_SCSI_ARCMSR=m CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m CONFIG_MEGARAID_LEGACY=m CONFIG_MEGARAID_SAS=m CONFIG_SCSI_MPT2SAS=m CONFIG_SCSI_MPT2SAS_MAX_SGE=128 # CONFIG_SCSI_MPT2SAS_LOGGING is not set CONFIG_SCSI_UFSHCD=m CONFIG_SCSI_HPTIOP=m CONFIG_SCSI_BUSLOGIC=m CONFIG_SCSI_FLASHPOINT=y CONFIG_VMWARE_PVSCSI=m CONFIG_HYPERV_STORAGE=m CONFIG_LIBFC=m CONFIG_LIBFCOE=m CONFIG_FCOE=m CONFIG_FCOE_FNIC=m CONFIG_SCSI_DMX3191D=m CONFIG_SCSI_EATA=m CONFIG_SCSI_EATA_TAGGED_QUEUE=y CONFIG_SCSI_EATA_LINKED_COMMANDS=y CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_GDTH=m CONFIG_SCSI_ISCI=m CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m CONFIG_SCSI_INIA100=m CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_STEX=m CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_IPR=m CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLA_FC=m CONFIG_TCM_QLA2XXX=m CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_LPFC_DEBUG_FS is not set CONFIG_SCSI_DC395x=m CONFIG_SCSI_DC390T=m CONFIG_SCSI_NSP32=m CONFIG_SCSI_DEBUG=m CONFIG_SCSI_PMCRAID=m CONFIG_SCSI_PM8001=m CONFIG_SCSI_SRP=m CONFIG_SCSI_BFA_FC=m CONFIG_SCSI_VIRTIO=m CONFIG_SCSI_LOWLEVEL_PCMCIA=y CONFIG_PCMCIA_AHA152X=m CONFIG_PCMCIA_FDOMAIN=m CONFIG_PCMCIA_NINJA_SCSI=m CONFIG_PCMCIA_QLOGIC=m CONFIG_PCMCIA_SYM53C500=m CONFIG_SCSI_DH=m CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m CONFIG_SCSI_OSD_INITIATOR=m CONFIG_SCSI_OSD_ULD=m CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=m CONFIG_SATA_INIC162X=m CONFIG_SATA_ACARD_AHCI=m CONFIG_SATA_SIL24=m CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # CONFIG_PDC_ADMA=m CONFIG_SATA_QSTOR=m CONFIG_SATA_SX4=m CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y CONFIG_SATA_MV=m CONFIG_SATA_NV=m CONFIG_SATA_PROMISE=m CONFIG_SATA_SIL=m CONFIG_SATA_SIS=m CONFIG_SATA_SVW=m CONFIG_SATA_ULI=m CONFIG_SATA_VIA=m CONFIG_SATA_VITESSE=m # # PATA SFF controllers with BMDMA # CONFIG_PATA_ALI=m CONFIG_PATA_AMD=m CONFIG_PATA_ARASAN_CF=m CONFIG_PATA_ARTOP=m CONFIG_PATA_ATIIXP=m CONFIG_PATA_ATP867X=m CONFIG_PATA_CMD64X=m CONFIG_PATA_CS5520=m CONFIG_PATA_CS5530=m CONFIG_PATA_CS5535=m CONFIG_PATA_CS5536=m CONFIG_PATA_CYPRESS=m CONFIG_PATA_EFAR=m CONFIG_PATA_HPT366=m CONFIG_PATA_HPT37X=m CONFIG_PATA_HPT3X2N=m CONFIG_PATA_HPT3X3=m # CONFIG_PATA_HPT3X3_DMA is not set CONFIG_PATA_IT8213=m CONFIG_PATA_IT821X=m CONFIG_PATA_JMICRON=m CONFIG_PATA_MARVELL=m CONFIG_PATA_NETCELL=m CONFIG_PATA_NINJA32=m CONFIG_PATA_NS87415=m CONFIG_PATA_OLDPIIX=m CONFIG_PATA_OPTIDMA=m CONFIG_PATA_PDC2027X=m CONFIG_PATA_PDC_OLD=m CONFIG_PATA_RADISYS=m CONFIG_PATA_RDC=m CONFIG_PATA_SC1200=m CONFIG_PATA_SCH=m CONFIG_PATA_SERVERWORKS=m CONFIG_PATA_SIL680=m CONFIG_PATA_SIS=m CONFIG_PATA_TOSHIBA=m CONFIG_PATA_TRIFLEX=m CONFIG_PATA_VIA=m CONFIG_PATA_WINBOND=m # # PIO-only SFF controllers # CONFIG_PATA_CMD640_PCI=m CONFIG_PATA_MPIIX=m CONFIG_PATA_NS87410=m CONFIG_PATA_OPTI=m CONFIG_PATA_PCMCIA=m CONFIG_PATA_PLATFORM=m CONFIG_PATA_RZ1000=m # # Generic fallback / legacy drivers # CONFIG_PATA_ACPI=m CONFIG_ATA_GENERIC=m # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m # CONFIG_MULTICORE_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=m CONFIG_DM_PERSISTENT_DATA=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m # CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m CONFIG_DM_DELAY=m CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m CONFIG_TARGET_CORE=m CONFIG_TCM_IBLOCK=m CONFIG_TCM_FILEIO=m CONFIG_TCM_PSCSI=m CONFIG_LOOPBACK_TARGET=m CONFIG_TCM_FC=m CONFIG_ISCSI_TARGET=m CONFIG_SBP_TARGET=m CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m CONFIG_FUSION_LAN=m # CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_SBP2=m CONFIG_FIREWIRE_NET=m CONFIG_FIREWIRE_NOSY=m CONFIG_I2O=m CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_CONFIG=m CONFIG_I2O_CONFIG_OLD_IOCTL=y CONFIG_I2O_BUS=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_NET_CORE=y CONFIG_BONDING=m CONFIG_DUMMY=m CONFIG_EQUALIZER=m CONFIG_NET_FC=y CONFIG_MII=y CONFIG_IEEE802154_DRIVERS=m CONFIG_IEEE802154_FAKEHARD=m CONFIG_IEEE802154_FAKELB=m CONFIG_IEEE802154_AT86RF230=m CONFIG_IFB=m # CONFIG_NET_TEAM is not set CONFIG_MACVLAN=m CONFIG_MACVTAP=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y CONFIG_RIONET=m CONFIG_RIONET_TX_SIZE=128 CONFIG_RIONET_RX_SIZE=128 CONFIG_TUN=m CONFIG_VETH=m CONFIG_VIRTIO_NET=m CONFIG_SUNGEM_PHY=m CONFIG_ARCNET=m CONFIG_ARCNET_1201=m CONFIG_ARCNET_1051=m CONFIG_ARCNET_RAW=m CONFIG_ARCNET_CAP=m CONFIG_ARCNET_COM90xx=m CONFIG_ARCNET_COM90xxIO=m CONFIG_ARCNET_RIM_I=m # CONFIG_ARCNET_COM20020 is not set CONFIG_ATM_DRIVERS=y CONFIG_ATM_DUMMY=m CONFIG_ATM_TCP=m CONFIG_ATM_LANAI=m CONFIG_ATM_ENI=m # CONFIG_ATM_ENI_DEBUG is not set CONFIG_ATM_ENI_TUNE_BURST=y CONFIG_ATM_ENI_BURST_TX_16W=y CONFIG_ATM_ENI_BURST_TX_8W=y CONFIG_ATM_ENI_BURST_TX_4W=y CONFIG_ATM_ENI_BURST_TX_2W=y CONFIG_ATM_ENI_BURST_RX_16W=y CONFIG_ATM_ENI_BURST_RX_8W=y CONFIG_ATM_ENI_BURST_RX_4W=y CONFIG_ATM_ENI_BURST_RX_2W=y CONFIG_ATM_FIRESTREAM=m CONFIG_ATM_ZATM=m # CONFIG_ATM_ZATM_DEBUG is not set CONFIG_ATM_NICSTAR=m CONFIG_ATM_NICSTAR_USE_SUNI=y CONFIG_ATM_NICSTAR_USE_IDT77105=y CONFIG_ATM_IDT77252=m # CONFIG_ATM_IDT77252_DEBUG is not set # CONFIG_ATM_IDT77252_RCV_ALL is not set CONFIG_ATM_IDT77252_USE_SUNI=y CONFIG_ATM_AMBASSADOR=m # CONFIG_ATM_AMBASSADOR_DEBUG is not set CONFIG_ATM_HORIZON=m # CONFIG_ATM_HORIZON_DEBUG is not set CONFIG_ATM_IA=m # CONFIG_ATM_IA_DEBUG is not set CONFIG_ATM_FORE200E=m CONFIG_ATM_FORE200E_USE_TASKLET=y CONFIG_ATM_FORE200E_TX_RETRY=16 CONFIG_ATM_FORE200E_DEBUG=0 CONFIG_ATM_HE=m CONFIG_ATM_HE_USE_SUNI=y CONFIG_ATM_SOLOS=m # # CAIF transport drivers # CONFIG_CAIF_TTY=m CONFIG_CAIF_SPI_SLAVE=m # CONFIG_CAIF_SPI_SYNC is not set CONFIG_CAIF_HSI=m # # Distributed Switch Architecture drivers # CONFIG_NET_DSA_MV88E6XXX=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y CONFIG_NET_DSA_MV88E6131=y CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_ETHERNET=y CONFIG_MDIO=m CONFIG_NET_VENDOR_3COM=y CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_3C589=m CONFIG_VORTEX=m CONFIG_TYPHOON=m CONFIG_NET_VENDOR_ADAPTEC=y CONFIG_ADAPTEC_STARFIRE=m CONFIG_NET_VENDOR_ALTEON=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_NET_VENDOR_AMD=y CONFIG_AMD8111_ETH=m CONFIG_PCNET32=m CONFIG_PCMCIA_NMCLAN=m CONFIG_NET_VENDOR_ATHEROS=y CONFIG_ATL2=m CONFIG_ATL1=m CONFIG_ATL1E=m CONFIG_ATL1C=m CONFIG_NET_VENDOR_BROADCOM=y CONFIG_B44=m CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y CONFIG_BNX2=m CONFIG_CNIC=m CONFIG_TIGON3=m CONFIG_BNX2X=m CONFIG_NET_VENDOR_BROCADE=y CONFIG_BNA=m CONFIG_NET_CALXEDA_XGMAC=m CONFIG_NET_VENDOR_CHELSIO=y CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3=m CONFIG_CHELSIO_T4=m CONFIG_CHELSIO_T4VF=m CONFIG_NET_VENDOR_CISCO=y CONFIG_ENIC=m CONFIG_DNET=m CONFIG_NET_VENDOR_DEC=y CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_DE2104X_DSL=0 CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m CONFIG_ULI526X=m CONFIG_PCMCIA_XIRCOM=m CONFIG_NET_VENDOR_DLINK=y CONFIG_DE600=m CONFIG_DE620=m CONFIG_DL2K=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set CONFIG_NET_VENDOR_EMULEX=y CONFIG_BE2NET=m CONFIG_NET_VENDOR_EXAR=y CONFIG_S2IO=m CONFIG_VXGE=m # CONFIG_VXGE_DEBUG_TRACE_ALL is not set CONFIG_NET_VENDOR_FUJITSU=y CONFIG_PCMCIA_FMVJ18X=m CONFIG_NET_VENDOR_HP=y CONFIG_HP100=m CONFIG_NET_VENDOR_INTEL=y CONFIG_E100=m CONFIG_E1000=m CONFIG_E1000E=m CONFIG_IGB=m CONFIG_IGB_DCA=y # CONFIG_IGB_PTP is not set CONFIG_IGBVF=m CONFIG_IXGB=m CONFIG_IXGBE=m CONFIG_IXGBE_HWMON=y CONFIG_IXGBE_DCA=y CONFIG_IXGBE_DCB=y # CONFIG_IXGBE_PTP is not set CONFIG_IXGBEVF=m CONFIG_NET_VENDOR_I825XX=y CONFIG_ZNET=m CONFIG_IP1000=m CONFIG_JME=m CONFIG_NET_VENDOR_MARVELL=y CONFIG_SKGE=m # CONFIG_SKGE_DEBUG is not set # CONFIG_SKGE_GENESIS is not set CONFIG_SKY2=m # CONFIG_SKY2_DEBUG is not set CONFIG_NET_VENDOR_MELLANOX=y CONFIG_MLX4_EN=m CONFIG_MLX4_EN_DCB=y CONFIG_MLX4_CORE=m CONFIG_MLX4_DEBUG=y CONFIG_NET_VENDOR_MICREL=y CONFIG_KS8842=m CONFIG_KS8851=m CONFIG_KS8851_MLL=m CONFIG_KSZ884X_PCI=m CONFIG_NET_VENDOR_MICROCHIP=y CONFIG_ENC28J60=m # CONFIG_ENC28J60_WRITEVERIFY is not set CONFIG_NET_VENDOR_MYRI=y CONFIG_MYRI10GE=m CONFIG_MYRI10GE_DCA=y CONFIG_FEALNX=m CONFIG_NET_VENDOR_NATSEMI=y CONFIG_NATSEMI=m CONFIG_NS83820=m CONFIG_NET_VENDOR_8390=y CONFIG_PCMCIA_AXNET=m CONFIG_NE2K_PCI=m CONFIG_PCMCIA_PCNET=m CONFIG_NET_VENDOR_NVIDIA=y CONFIG_FORCEDETH=m CONFIG_NET_VENDOR_OKI=y CONFIG_PCH_GBE=m # CONFIG_PCH_PTP is not set CONFIG_ETHOC=m # CONFIG_NET_PACKET_ENGINE is not set CONFIG_NET_VENDOR_QLOGIC=y CONFIG_QLA3XXX=m CONFIG_QLCNIC=m CONFIG_QLGE=m CONFIG_NETXEN_NIC=m CONFIG_NET_VENDOR_REALTEK=y CONFIG_ATP=m CONFIG_8139CP=m CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_R8169=m CONFIG_NET_VENDOR_RDC=y CONFIG_R6040=m CONFIG_NET_VENDOR_SEEQ=y CONFIG_SEEQ8005=m CONFIG_NET_VENDOR_SILAN=y CONFIG_SC92031=m CONFIG_NET_VENDOR_SIS=y CONFIG_SIS900=m CONFIG_SIS190=m CONFIG_SFC=m CONFIG_SFC_MTD=y CONFIG_SFC_MCDI_MON=y CONFIG_SFC_SRIOV=y CONFIG_NET_VENDOR_SMSC=y CONFIG_PCMCIA_SMC91C92=m CONFIG_EPIC100=m CONFIG_SMSC9420=m CONFIG_NET_VENDOR_STMICRO=y CONFIG_STMMAC_ETH=m CONFIG_STMMAC_PLATFORM=y # CONFIG_STMMAC_PCI is not set # CONFIG_STMMAC_DEBUG_FS is not set # CONFIG_STMMAC_DA is not set CONFIG_STMMAC_RING=y # CONFIG_STMMAC_CHAINED is not set CONFIG_NET_VENDOR_SUN=y CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m CONFIG_CASSINI=m CONFIG_NIU=m CONFIG_NET_VENDOR_TEHUTI=y CONFIG_TEHUTI=m CONFIG_NET_VENDOR_TI=y CONFIG_TLAN=m CONFIG_NET_VENDOR_VIA=y CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_VIA_VELOCITY=m CONFIG_NET_VENDOR_WIZNET=y CONFIG_WIZNET_W5100=m CONFIG_WIZNET_W5300=m # CONFIG_WIZNET_BUS_DIRECT is not set # CONFIG_WIZNET_BUS_INDIRECT is not set CONFIG_WIZNET_BUS_ANY=y CONFIG_NET_VENDOR_XIRCOM=y CONFIG_PCMCIA_XIRC2PS=m CONFIG_FDDI=m CONFIG_DEFXX=m CONFIG_DEFXX_MMIO=y CONFIG_SKFP=m CONFIG_HIPPI=y CONFIG_ROADRUNNER=m CONFIG_ROADRUNNER_LARGE_RINGS=y # CONFIG_NET_SB1000 is not set CONFIG_PHYLIB=y # # MII PHY device drivers # CONFIG_AMD_PHY=m CONFIG_MARVELL_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_QSEMI_PHY=m CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=m CONFIG_BCM87XX_PHY=m CONFIG_ICPLUS_PHY=m CONFIG_REALTEK_PHY=m CONFIG_NATIONAL_PHY=m CONFIG_STE10XP=m CONFIG_LSI_ET1011C_PHY=m CONFIG_MICREL_PHY=m CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=m CONFIG_MDIO_GPIO=m CONFIG_MICREL_KS8995MA=m CONFIG_PLIP=m CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPP_MULTILINK=y CONFIG_PPPOATM=m CONFIG_PPPOE=m CONFIG_PPTP=m CONFIG_PPPOL2TP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLHC=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y # # USB Network Adapters # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m CONFIG_USB_NET_CDC_EEM=m CONFIG_USB_NET_CDC_NCM=m CONFIG_USB_NET_DM9601=m CONFIG_USB_NET_SMSC75XX=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_PLUSB=m CONFIG_USB_NET_MCS7830=m CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_NET_CDC_SUBSET=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=m CONFIG_USB_NET_CX82310_ETH=m CONFIG_USB_NET_KALMIA=m CONFIG_USB_NET_QMI_WWAN=m CONFIG_USB_HSO=m CONFIG_USB_NET_INT51X1=m CONFIG_USB_CDC_PHONET=m CONFIG_USB_IPHETH=m CONFIG_USB_SIERRA_NET=m CONFIG_USB_VL600=m CONFIG_WLAN=y CONFIG_PCMCIA_RAYCS=m CONFIG_LIBERTAS_THINFIRM=m # CONFIG_LIBERTAS_THINFIRM_DEBUG is not set CONFIG_LIBERTAS_THINFIRM_USB=m CONFIG_AIRO=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m CONFIG_PCMCIA_ATMEL=m CONFIG_AT76C50X_USB=m CONFIG_AIRO_CS=m CONFIG_PCMCIA_WL3501=m CONFIG_PRISM54=m CONFIG_USB_ZD1201=m CONFIG_USB_NET_RNDIS_WLAN=m CONFIG_RTL8180=m CONFIG_RTL8187=m CONFIG_RTL8187_LEDS=y CONFIG_ADM8211=m CONFIG_MAC80211_HWSIM=m CONFIG_MWL8K=m CONFIG_ATH_COMMON=m # CONFIG_ATH_DEBUG is not set CONFIG_ATH5K=m # CONFIG_ATH5K_DEBUG is not set CONFIG_ATH5K_PCI=y CONFIG_ATH9K_HW=m CONFIG_ATH9K_COMMON=m CONFIG_ATH9K_BTCOEX_SUPPORT=y CONFIG_ATH9K=m CONFIG_ATH9K_PCI=y CONFIG_ATH9K_AHB=y # CONFIG_ATH9K_DEBUGFS is not set CONFIG_ATH9K_RATE_CONTROL=y CONFIG_ATH9K_HTC=m # CONFIG_ATH9K_HTC_DEBUGFS is not set CONFIG_CARL9170=m CONFIG_CARL9170_LEDS=y # CONFIG_CARL9170_DEBUGFS is not set CONFIG_CARL9170_WPC=y # CONFIG_CARL9170_HWRNG is not set CONFIG_ATH6KL=m CONFIG_ATH6KL_SDIO=m CONFIG_ATH6KL_USB=m # CONFIG_ATH6KL_DEBUG is not set CONFIG_B43=m CONFIG_B43_BCMA=y CONFIG_B43_BCMA_EXTRA=y CONFIG_B43_SSB=y CONFIG_B43_PCI_AUTOSELECT=y CONFIG_B43_PCICORE_AUTOSELECT=y CONFIG_B43_PCMCIA=y CONFIG_B43_SDIO=y CONFIG_B43_BCMA_PIO=y CONFIG_B43_PIO=y # CONFIG_B43_PHY_N is not set CONFIG_B43_PHY_LP=y # CONFIG_B43_PHY_HT is not set CONFIG_B43_LEDS=y CONFIG_B43_HWRNG=y # CONFIG_B43_DEBUG is not set CONFIG_B43LEGACY=m CONFIG_B43LEGACY_PCI_AUTOSELECT=y CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y CONFIG_B43LEGACY_LEDS=y CONFIG_B43LEGACY_HWRNG=y # CONFIG_B43LEGACY_DEBUG is not set CONFIG_B43LEGACY_DMA=y CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y # CONFIG_B43LEGACY_DMA_MODE is not set # CONFIG_B43LEGACY_PIO_MODE is not set CONFIG_BRCMUTIL=m CONFIG_BRCMSMAC=m # CONFIG_BRCMFMAC is not set # CONFIG_BRCMDBG is not set CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y CONFIG_HOSTAP_PLX=m CONFIG_HOSTAP_PCI=m CONFIG_HOSTAP_CS=m CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y CONFIG_IPW2100_DEBUG=y CONFIG_IPW2200=m CONFIG_IPW2200_MONITOR=y CONFIG_IPW2200_RADIOTAP=y CONFIG_IPW2200_PROMISCUOUS=y CONFIG_IPW2200_QOS=y CONFIG_IPW2200_DEBUG=y CONFIG_LIBIPW=m CONFIG_LIBIPW_DEBUG=y CONFIG_IWLWIFI=m CONFIG_IWLDVM=m # # Debugging Options # CONFIG_IWLWIFI_DEBUG=y CONFIG_IWLWIFI_DEBUGFS=y # CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set CONFIG_IWLWIFI_DEVICE_TESTMODE=y # CONFIG_IWLWIFI_P2P is not set # CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set CONFIG_IWLEGACY=m CONFIG_IWL4965=m CONFIG_IWL3945=m # # iwl3945 / iwl4965 Debugging Options # # CONFIG_IWLEGACY_DEBUG is not set # CONFIG_IWLEGACY_DEBUGFS is not set CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_CS=m CONFIG_LIBERTAS_SDIO=m CONFIG_LIBERTAS_SPI=m # CONFIG_LIBERTAS_DEBUG is not set CONFIG_LIBERTAS_MESH=y CONFIG_HERMES=m # CONFIG_HERMES_PRISM is not set CONFIG_HERMES_CACHE_FW_ON_INIT=y CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m CONFIG_ORINOCO_USB=m CONFIG_P54_COMMON=m CONFIG_P54_USB=m CONFIG_P54_PCI=m CONFIG_P54_SPI=m # CONFIG_P54_SPI_DEFAULT_EEPROM is not set CONFIG_P54_LEDS=y CONFIG_RT2X00=m CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m CONFIG_RT61PCI=m # CONFIG_RT2800PCI is not set CONFIG_RT2500USB=m CONFIG_RT73USB=m CONFIG_RT2800USB=m # CONFIG_RT2800USB_RT33XX is not set # CONFIG_RT2800USB_RT35XX is not set # CONFIG_RT2800USB_RT53XX is not set # CONFIG_RT2800USB_UNKNOWN is not set CONFIG_RT2800_LIB=m CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_LIB_DEBUGFS is not set # CONFIG_RT2X00_DEBUG is not set CONFIG_RTL8192CE=m CONFIG_RTL8192SE=m CONFIG_RTL8192DE=m CONFIG_RTL8192CU=m CONFIG_RTLWIFI=m # CONFIG_RTLWIFI_DEBUG is not set CONFIG_RTL8192C_COMMON=m CONFIG_WL_TI=y CONFIG_WL1251=m CONFIG_WL1251_SPI=m CONFIG_WL1251_SDIO=m CONFIG_WL12XX=m CONFIG_WL18XX=m CONFIG_WLCORE=m CONFIG_WLCORE_SPI=m CONFIG_WLCORE_SDIO=m CONFIG_WL12XX_PLATFORM_DATA=y CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG is not set CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_MWIFIEX_PCIE=m CONFIG_MWIFIEX_USB=m # # WiMAX Wireless Broadband devices # CONFIG_WIMAX_I2400M=m CONFIG_WIMAX_I2400M_USB=m CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 CONFIG_WAN=y CONFIG_LANMEDIA=m CONFIG_HDLC=m CONFIG_HDLC_RAW=m CONFIG_HDLC_RAW_ETH=m CONFIG_HDLC_CISCO=m CONFIG_HDLC_FR=m CONFIG_HDLC_PPP=m CONFIG_HDLC_X25=m CONFIG_PCI200SYN=m CONFIG_WANXL=m CONFIG_PC300TOO=m CONFIG_FARSYNC=m CONFIG_DSCC4=m CONFIG_DSCC4_PCISYNC=y CONFIG_DSCC4_PCI_RST=y CONFIG_DLCI=m CONFIG_DLCI_MAX=8 # CONFIG_WAN_ROUTER_DRIVERS is not set CONFIG_LAPBETHER=m CONFIG_X25_ASY=m CONFIG_SBNI=m CONFIG_SBNI_MULTILINE=y CONFIG_VMXNET3=m CONFIG_HYPERV_NET=m CONFIG_ISDN=y CONFIG_ISDN_I4L=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y CONFIG_IPPP_FILTER=y CONFIG_ISDN_PPP_BSDCOMP=m CONFIG_ISDN_AUDIO=y CONFIG_ISDN_TTY_FAX=y CONFIG_ISDN_X25=y # # ISDN feature submodules # CONFIG_ISDN_DIVERSION=m # # ISDN4Linux hardware drivers # # # Passive cards # CONFIG_ISDN_DRV_HISAX=m # # D-channel protocol features # CONFIG_HISAX_EURO=y CONFIG_DE_AOC=y # CONFIG_HISAX_NO_SENDCOMPLETE is not set # CONFIG_HISAX_NO_LLC is not set # CONFIG_HISAX_NO_KEYPAD is not set CONFIG_HISAX_1TR6=y CONFIG_HISAX_NI1=y CONFIG_HISAX_MAX_CARDS=8 # # HiSax supported cards # CONFIG_HISAX_16_3=y CONFIG_HISAX_TELESPCI=y CONFIG_HISAX_S0BOX=y CONFIG_HISAX_FRITZPCI=y CONFIG_HISAX_AVM_A1_PCMCIA=y CONFIG_HISAX_ELSA=y CONFIG_HISAX_DIEHLDIVA=y CONFIG_HISAX_SEDLBAUER=y CONFIG_HISAX_NETJET=y CONFIG_HISAX_NETJET_U=y CONFIG_HISAX_NICCY=y CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_SCT_QUADRO=y CONFIG_HISAX_GAZEL=y CONFIG_HISAX_HFC_PCI=y CONFIG_HISAX_W6692=y CONFIG_HISAX_HFC_SX=y CONFIG_HISAX_ENTERNOW_PCI=y # CONFIG_HISAX_DEBUG is not set # # HiSax PCMCIA card service modules # CONFIG_HISAX_SEDLBAUER_CS=m CONFIG_HISAX_ELSA_CS=m CONFIG_HISAX_AVM_A1_CS=m CONFIG_HISAX_TELES_CS=m # # HiSax sub driver modules # CONFIG_HISAX_ST5481=m CONFIG_HISAX_HFCUSB=m CONFIG_HISAX_HFC4S8S=m CONFIG_HISAX_FRITZ_PCIPNP=m # # Active cards # CONFIG_ISDN_CAPI=m CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_CAPI_TRACE=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_CAPIDRV=m # # CAPI hardware drivers # CONFIG_CAPI_AVM=y CONFIG_ISDN_DRV_AVMB1_B1PCI=m CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m CONFIG_ISDN_DRV_AVMB1_AVM_CS=m CONFIG_ISDN_DRV_AVMB1_T1PCI=m CONFIG_ISDN_DRV_AVMB1_C4=m CONFIG_CAPI_EICON=y CONFIG_ISDN_DIVAS=m CONFIG_ISDN_DIVAS_BRIPCI=y CONFIG_ISDN_DIVAS_PRIPCI=y CONFIG_ISDN_DIVAS_DIVACAPI=m CONFIG_ISDN_DIVAS_USERIDI=m CONFIG_ISDN_DIVAS_MAINT=m CONFIG_ISDN_DRV_GIGASET=m # CONFIG_GIGASET_CAPI is not set CONFIG_GIGASET_I4L=y # CONFIG_GIGASET_DUMMYLL is not set CONFIG_GIGASET_BASE=m CONFIG_GIGASET_M105=m CONFIG_GIGASET_M101=m # CONFIG_GIGASET_DEBUG is not set CONFIG_HYSDN=m CONFIG_HYSDN_CAPI=y CONFIG_MISDN=m CONFIG_MISDN_DSP=m CONFIG_MISDN_L1OIP=m # # mISDN hardware drivers # CONFIG_MISDN_HFCPCI=m CONFIG_MISDN_HFCMULTI=m CONFIG_MISDN_HFCUSB=m CONFIG_MISDN_AVMFRITZ=m CONFIG_MISDN_SPEEDFAX=m CONFIG_MISDN_INFINEON=m CONFIG_MISDN_W6692=m CONFIG_MISDN_NETJET=m CONFIG_MISDN_IPAC=m CONFIG_MISDN_ISAR=m CONFIG_ISDN_HDLC=m # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ADP5520=m CONFIG_KEYBOARD_ADP5588=m CONFIG_KEYBOARD_ADP5589=m CONFIG_KEYBOARD_ATKBD=y CONFIG_KEYBOARD_QT1070=m CONFIG_KEYBOARD_QT2160=m # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_GPIO=m CONFIG_KEYBOARD_GPIO_POLLED=m CONFIG_KEYBOARD_TCA6416=m CONFIG_KEYBOARD_TCA8418=m CONFIG_KEYBOARD_MATRIX=m CONFIG_KEYBOARD_LM8323=m CONFIG_KEYBOARD_LM8333=m CONFIG_KEYBOARD_MAX7359=m CONFIG_KEYBOARD_MCS=m CONFIG_KEYBOARD_MPR121=m CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_OPENCORES=m # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_OMAP4=m CONFIG_KEYBOARD_XTKBD=m CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m CONFIG_MOUSE_VSXXXAA=m CONFIG_MOUSE_GPIO=m CONFIG_MOUSE_SYNAPTICS_I2C=m CONFIG_MOUSE_SYNAPTICS_USB=m CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m CONFIG_JOYSTICK_ADI=m CONFIG_JOYSTICK_COBRA=m CONFIG_JOYSTICK_GF2K=m CONFIG_JOYSTICK_GRIP=m CONFIG_JOYSTICK_GRIP_MP=m CONFIG_JOYSTICK_GUILLEMOT=m CONFIG_JOYSTICK_INTERACT=m CONFIG_JOYSTICK_SIDEWINDER=m CONFIG_JOYSTICK_TMDC=m CONFIG_JOYSTICK_IFORCE=m CONFIG_JOYSTICK_IFORCE_USB=y CONFIG_JOYSTICK_IFORCE_232=y CONFIG_JOYSTICK_WARRIOR=m CONFIG_JOYSTICK_MAGELLAN=m CONFIG_JOYSTICK_SPACEORB=m CONFIG_JOYSTICK_SPACEBALL=m CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDJOY=m CONFIG_JOYSTICK_ZHENHUA=m CONFIG_JOYSTICK_DB9=m CONFIG_JOYSTICK_GAMECON=m CONFIG_JOYSTICK_TURBOGRAFX=m CONFIG_JOYSTICK_AS5011=m CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_XPAD=m CONFIG_JOYSTICK_XPAD_FF=y CONFIG_JOYSTICK_XPAD_LEDS=y CONFIG_JOYSTICK_WALKERA0701=m CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m CONFIG_TABLET_USB_GTCO=m CONFIG_TABLET_USB_HANWANG=m CONFIG_TABLET_USB_KBTAB=m CONFIG_TABLET_USB_WACOM=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m CONFIG_TOUCHSCREEN_AD7877=m CONFIG_TOUCHSCREEN_AD7879=m CONFIG_TOUCHSCREEN_AD7879_I2C=m CONFIG_TOUCHSCREEN_AD7879_SPI=m CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_AUO_PIXCIR=m CONFIG_TOUCHSCREEN_BU21013=m CONFIG_TOUCHSCREEN_CY8CTMG110=m CONFIG_TOUCHSCREEN_CYTTSP_CORE=m CONFIG_TOUCHSCREEN_CYTTSP_I2C=m CONFIG_TOUCHSCREEN_CYTTSP_SPI=m CONFIG_TOUCHSCREEN_DYNAPRO=m CONFIG_TOUCHSCREEN_HAMPSHIRE=m CONFIG_TOUCHSCREEN_EETI=m CONFIG_TOUCHSCREEN_EGALAX=m CONFIG_TOUCHSCREEN_FUJITSU=m CONFIG_TOUCHSCREEN_ILI210X=m CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m CONFIG_TOUCHSCREEN_WACOM_I2C=m CONFIG_TOUCHSCREEN_MAX11801=m CONFIG_TOUCHSCREEN_MCS5000=m CONFIG_TOUCHSCREEN_MMS114=m CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_INEXIO=m CONFIG_TOUCHSCREEN_MK712=m CONFIG_TOUCHSCREEN_PENMOUNT=m CONFIG_TOUCHSCREEN_EDT_FT5X06=m CONFIG_TOUCHSCREEN_TOUCHRIGHT=m CONFIG_TOUCHSCREEN_TOUCHWIN=m CONFIG_TOUCHSCREEN_UCB1400=m CONFIG_TOUCHSCREEN_PIXCIR=m CONFIG_TOUCHSCREEN_WM831X=m CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_TOUCHSCREEN_WM9705=y CONFIG_TOUCHSCREEN_WM9712=y CONFIG_TOUCHSCREEN_WM9713=y CONFIG_TOUCHSCREEN_USB_COMPOSITE=m CONFIG_TOUCHSCREEN_MC13783=m CONFIG_TOUCHSCREEN_USB_EGALAX=y CONFIG_TOUCHSCREEN_USB_PANJIT=y CONFIG_TOUCHSCREEN_USB_3M=y CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y CONFIG_TOUCHSCREEN_USB_JASTEC=y CONFIG_TOUCHSCREEN_USB_ELO=y CONFIG_TOUCHSCREEN_USB_E2I=y CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y CONFIG_TOUCHSCREEN_USB_NEXIO=y CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC2005=m CONFIG_TOUCHSCREEN_TSC2007=m CONFIG_TOUCHSCREEN_PCAP=m CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_TPS6507X=m CONFIG_INPUT_MISC=y CONFIG_INPUT_88PM80X_ONKEY=m CONFIG_INPUT_AD714X=m CONFIG_INPUT_AD714X_I2C=m CONFIG_INPUT_AD714X_SPI=m CONFIG_INPUT_BMA150=m CONFIG_INPUT_PCSPKR=m CONFIG_INPUT_MC13783_PWRBUTTON=m CONFIG_INPUT_MMA8450=m CONFIG_INPUT_MPU3050=m CONFIG_INPUT_APANEL=m CONFIG_INPUT_GP2A=m CONFIG_INPUT_GPIO_TILT_POLLED=m CONFIG_INPUT_WISTRON_BTNS=m CONFIG_INPUT_ATLAS_BTNS=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_KXTJ9=m # CONFIG_INPUT_KXTJ9_POLLED_MODE is not set CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m CONFIG_INPUT_PCF8574=m CONFIG_INPUT_GPIO_ROTARY_ENCODER=m CONFIG_INPUT_WM831X_ON=m CONFIG_INPUT_PCAP=m CONFIG_INPUT_ADXL34X=m CONFIG_INPUT_ADXL34X_I2C=m CONFIG_INPUT_ADXL34X_SPI=m CONFIG_INPUT_CMA3000=m CONFIG_INPUT_CMA3000_I2C=m # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m CONFIG_SERIO_CT82C710=m CONFIG_SERIO_PARKBD=m CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m CONFIG_SERIO_ALTERA_PS2=m CONFIG_SERIO_PS2MULT=m CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m CONFIG_GAMEPORT_EMU10K1=m CONFIG_GAMEPORT_FM801=m # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=0 CONFIG_SERIAL_NONSTANDARD=y CONFIG_ROCKETPORT=m CONFIG_CYCLADES=m # CONFIG_CYZ_INTR is not set CONFIG_MOXA_INTELLIO=m CONFIG_MOXA_SMARTIO=m CONFIG_SYNCLINK=m CONFIG_SYNCLINKMP=m CONFIG_SYNCLINK_GT=m CONFIG_NOZOMI=m CONFIG_ISI=m CONFIG_N_HDLC=m CONFIG_N_GSM=m CONFIG_TRACE_ROUTER=m CONFIG_TRACE_SINK=m CONFIG_DEVKMEM=y CONFIG_STALDRV=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=16 CONFIG_SERIAL_8250_RUNTIME_UARTS=8 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_MAX3107=m CONFIG_SERIAL_MRST_MAX3110=m CONFIG_SERIAL_MFD_HSU=m CONFIG_SERIAL_UARTLITE=m CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_TIMBERDALE=m CONFIG_SERIAL_ALTERA_JTAGUART=m CONFIG_SERIAL_ALTERA_UART=m CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 CONFIG_SERIAL_IFX6X60=m CONFIG_SERIAL_PCH_UART=m CONFIG_SERIAL_XILINX_PS_UART=m CONFIG_TTY_PRINTK=y CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m CONFIG_HVC_DRIVER=y CONFIG_VIRTIO_CONSOLE=m CONFIG_IPMI_HANDLER=m CONFIG_IPMI_PANIC_EVENT=y # CONFIG_IPMI_PANIC_STRING is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m CONFIG_HW_RANDOM_GEODE=m CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m CONFIG_NVRAM=y CONFIG_R3964=m CONFIG_APPLICOM=m CONFIG_SONYPI=m # # PCMCIA character devices # CONFIG_SYNCLINK_CS=m CONFIG_CARDMAN_4000=m CONFIG_CARDMAN_4040=m CONFIG_IPWIRELESS=m CONFIG_MWAVE=m CONFIG_SCx200_GPIO=m CONFIG_PC8736x_GPIO=m CONFIG_NSC_GPIO=m CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=4096 CONFIG_HPET=y CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=m CONFIG_TCG_TPM=m CONFIG_TCG_TIS=m CONFIG_TCG_NSC=m CONFIG_TCG_ATMEL=m CONFIG_TCG_INFINEON=m CONFIG_TELCLOCK=m CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_MUX=m # # Multiplexer I2C Chip support # CONFIG_I2C_MUX_GPIO=m CONFIG_I2C_MUX_PCA9541=m CONFIG_I2C_MUX_PCA954x=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI1563=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD756_S4882=m CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m CONFIG_I2C_ISCH=m CONFIG_I2C_PIIX4=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_NFORCE2_S4985=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # # ACPI drivers # CONFIG_I2C_SCMI=m # # I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_DESIGNWARE_CORE=m CONFIG_I2C_DESIGNWARE_PCI=m CONFIG_I2C_EG20T=m CONFIG_I2C_GPIO=m CONFIG_I2C_INTEL_MID=m CONFIG_I2C_OCORES=m CONFIG_I2C_PCA_PLATFORM=m # CONFIG_I2C_PXA_PCI is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_DIOLAN_U2C=m CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_TAOS_EVM=m CONFIG_I2C_TINY_USB=m # # Other I2C/SMBus bus drivers # CONFIG_I2C_STUB=m CONFIG_SCx200_I2C=m CONFIG_SCx200_I2C_SCL=12 CONFIG_SCx200_I2C_SDA=13 CONFIG_SCx200_ACB=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_ALTERA=m CONFIG_SPI_BITBANG=m CONFIG_SPI_BUTTERFLY=m CONFIG_SPI_GPIO=m CONFIG_SPI_LM70_LLP=m CONFIG_SPI_OC_TINY=m CONFIG_SPI_PXA2XX=m CONFIG_SPI_PXA2XX_PCI=y CONFIG_SPI_TOPCLIFF_PCH=m CONFIG_SPI_XCOMM=m CONFIG_SPI_XILINX=m CONFIG_SPI_DESIGNWARE=y CONFIG_SPI_DW_PCI=m # CONFIG_SPI_DW_MID_DMA is not set # # SPI Protocol Masters # CONFIG_SPI_SPIDEV=m CONFIG_SPI_TLE62X0=m CONFIG_HSI=m CONFIG_HSI_BOARDINFO=y # # HSI clients # CONFIG_HSI_CHAR=m # # PPS support # CONFIG_PPS=m # CONFIG_PPS_DEBUG is not set # CONFIG_NTP_PPS is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set CONFIG_PPS_CLIENT_LDISC=m CONFIG_PPS_CLIENT_PARPORT=m CONFIG_PPS_CLIENT_GPIO=m # # PPS generators support # # # PTP clock support # CONFIG_PTP_1588_CLOCK=m # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # CONFIG_PTP_1588_CLOCK_PCH=m CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC=m CONFIG_GPIO_MAX730X=m # # Memory mapped GPIO drivers: # CONFIG_GPIO_GENERIC_PLATFORM=m CONFIG_GPIO_IT8761E=m CONFIG_GPIO_SCH=m CONFIG_GPIO_ICH=m CONFIG_GPIO_VX855=m # # I2C GPIO expanders: # CONFIG_GPIO_ARIZONA=m CONFIG_GPIO_MAX7300=m CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m # CONFIG_GPIO_SX150X is not set CONFIG_GPIO_TPS65912=m CONFIG_GPIO_WM831X=m CONFIG_GPIO_ADP5520=m CONFIG_GPIO_ADP5588=m # # PCI GPIO expanders: # CONFIG_GPIO_CS5535=m CONFIG_GPIO_BT8XX=m CONFIG_GPIO_AMD8111=m CONFIG_GPIO_LANGWELL=y CONFIG_GPIO_PCH=m CONFIG_GPIO_ML_IOH=m # CONFIG_GPIO_TIMBERDALE is not set CONFIG_GPIO_RDC321X=m # # SPI GPIO expanders: # CONFIG_GPIO_MAX7301=m CONFIG_GPIO_MCP23S08=m CONFIG_GPIO_MC33880=m CONFIG_GPIO_74X164=m # # AC97 GPIO expanders: # CONFIG_GPIO_UCB1400=y # # MODULbus GPIO expanders: # CONFIG_GPIO_JANZ_TTL=m CONFIG_W1=m CONFIG_W1_CON=y # # 1-wire Bus Masters # CONFIG_W1_MASTER_MATROX=m CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m CONFIG_W1_MASTER_DS1WM=m CONFIG_W1_MASTER_GPIO=m # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=m CONFIG_W1_SLAVE_SMEM=m CONFIG_W1_SLAVE_DS2408=m CONFIG_W1_SLAVE_DS2423=m CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m CONFIG_W1_SLAVE_DS2433_CRC=y CONFIG_W1_SLAVE_DS2760=m CONFIG_W1_SLAVE_DS2780=m CONFIG_W1_SLAVE_DS2781=m CONFIG_W1_SLAVE_DS28E04=m CONFIG_W1_SLAVE_BQ27000=m CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set CONFIG_PDA_POWER=m CONFIG_WM831X_BACKUP=m CONFIG_WM831X_POWER=m CONFIG_TEST_POWER=m CONFIG_BATTERY_DS2760=m CONFIG_BATTERY_DS2780=m CONFIG_BATTERY_DS2781=m CONFIG_BATTERY_DS2782=m CONFIG_BATTERY_SBS=m CONFIG_BATTERY_BQ27x00=m CONFIG_BATTERY_BQ27X00_I2C=y CONFIG_BATTERY_BQ27X00_PLATFORM=y CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m CONFIG_CHARGER_MAX8903=m CONFIG_CHARGER_LP8727=m CONFIG_CHARGER_GPIO=m # CONFIG_CHARGER_MANAGER is not set CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_SMB347=m # CONFIG_POWER_AVS is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # CONFIG_SENSORS_ABITUGURU=m CONFIG_SENSORS_ABITUGURU3=m CONFIG_SENSORS_AD7314=m CONFIG_SENSORS_AD7414=m CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADCXX=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m CONFIG_SENSORS_ASC7621=m CONFIG_SENSORS_K8TEMP=m CONFIG_SENSORS_K10TEMP=m CONFIG_SENSORS_FAM15H_POWER=m CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS620=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_I5K_AMB=m CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_F71882FG=m CONFIG_SENSORS_F75375S=m CONFIG_SENSORS_FSCHMD=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_GPIO_FAN=m CONFIG_SENSORS_HIH6130=m CONFIG_SENSORS_CORETEMP=m CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_JC42=m CONFIG_SENSORS_LINEAGE=m CONFIG_SENSORS_LM63=m CONFIG_SENSORS_LM70=m CONFIG_SENSORS_LM73=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m CONFIG_SENSORS_LTC4151=m CONFIG_SENSORS_LTC4215=m CONFIG_SENSORS_LTC4245=m CONFIG_SENSORS_LTC4261=m CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_MAX1111=m CONFIG_SENSORS_MAX16065=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX1668=m CONFIG_SENSORS_MAX6639=m CONFIG_SENSORS_MAX6642=m CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_MCP3021=m CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_PCF8591=m CONFIG_PMBUS=m CONFIG_SENSORS_PMBUS=m CONFIG_SENSORS_ADM1275=m CONFIG_SENSORS_LM25066=m CONFIG_SENSORS_LTC2978=m CONFIG_SENSORS_MAX16064=m CONFIG_SENSORS_MAX34440=m CONFIG_SENSORS_MAX8688=m CONFIG_SENSORS_UCD9000=m CONFIG_SENSORS_UCD9200=m CONFIG_SENSORS_ZL6100=m CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SHT21=m CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_SMM665=m CONFIG_SENSORS_DME1737=m CONFIG_SENSORS_EMC1403=m CONFIG_SENSORS_EMC2103=m CONFIG_SENSORS_EMC6W201=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m # CONFIG_SENSORS_SCH56XX_COMMON is not set CONFIG_SENSORS_ADS1015=m CONFIG_SENSORS_ADS7828=m CONFIG_SENSORS_ADS7871=m CONFIG_SENSORS_AMC6821=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP102=m CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m CONFIG_SENSORS_VIA_CPUTEMP=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83793=m CONFIG_SENSORS_W83795=m # CONFIG_SENSORS_W83795_FANCTRL is not set CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m CONFIG_SENSORS_WM831X=m CONFIG_SENSORS_APPLESMC=m CONFIG_SENSORS_MC13783_ADC=m # # ACPI drivers # CONFIG_SENSORS_ACPI_POWER=m CONFIG_SENSORS_ATK0110=m CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # CONFIG_SSB=m CONFIG_SSB_SPROM=y CONFIG_SSB_BLOCKIO=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y CONFIG_SSB_PCMCIAHOST=y CONFIG_SSB_SDIOHOST_POSSIBLE=y CONFIG_SSB_SDIOHOST=y # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # CONFIG_BCMA=m CONFIG_BCMA_BLOCKIO=y CONFIG_BCMA_HOST_PCI_POSSIBLE=y # CONFIG_BCMA_HOST_PCI is not set CONFIG_BCMA_DRIVER_GMAC_CMN=y # CONFIG_BCMA_DEBUG is not set # # Multifunction device drivers # CONFIG_MFD_CORE=y # CONFIG_MFD_88PM860X is not set CONFIG_MFD_88PM800=m CONFIG_MFD_88PM805=m CONFIG_MFD_SM501=m CONFIG_MFD_SM501_GPIO=y CONFIG_HTC_PASIC3=m # CONFIG_HTC_I2CPLD is not set CONFIG_UCB1400_CORE=m CONFIG_MFD_LM3533=m CONFIG_TPS6105X=m CONFIG_TPS65010=m CONFIG_TPS6507X=m CONFIG_MFD_TPS65217=m # CONFIG_MFD_TPS6586X is not set # CONFIG_MFD_TPS65910 is not set CONFIG_MFD_TPS65912=y CONFIG_MFD_TPS65912_I2C=y CONFIG_MFD_TPS65912_SPI=y # CONFIG_TWL4030_CORE is not set # CONFIG_TWL6040_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_SPI is not set # CONFIG_MFD_DA9052_I2C is not set CONFIG_PMIC_ADP5520=y # CONFIG_MFD_MAX77686 is not set # CONFIG_MFD_MAX77693 is not set # CONFIG_MFD_MAX8925 is not set CONFIG_MFD_MAX8997=y # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_SEC_CORE is not set CONFIG_MFD_ARIZONA=y CONFIG_MFD_ARIZONA_I2C=m CONFIG_MFD_ARIZONA_SPI=m # CONFIG_MFD_WM5102 is not set # CONFIG_MFD_WM5110 is not set # CONFIG_MFD_WM8400 is not set CONFIG_MFD_WM831X=y # CONFIG_MFD_WM831X_I2C is not set CONFIG_MFD_WM831X_SPI=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set CONFIG_MFD_MC13783=m CONFIG_MFD_MC13XXX=m CONFIG_MFD_MC13XXX_SPI=m CONFIG_MFD_MC13XXX_I2C=m # CONFIG_ABX500_CORE is not set CONFIG_EZX_PCAP=y CONFIG_MFD_CS5535=m CONFIG_MFD_TIMBERDALE=m CONFIG_LPC_SCH=m CONFIG_LPC_ICH=m CONFIG_MFD_RDC321X=m CONFIG_MFD_JANZ_CMODIO=m CONFIG_MFD_VX855=m CONFIG_MFD_WL1273_CORE=m # CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_AAT2870_CORE is not set # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_PALMAS is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_DUMMY=y CONFIG_REGULATOR_FIXED_VOLTAGE=m CONFIG_REGULATOR_VIRTUAL_CONSUMER=m CONFIG_REGULATOR_USERSPACE_CONSUMER=m CONFIG_REGULATOR_GPIO=m CONFIG_REGULATOR_AD5398=m CONFIG_REGULATOR_ARIZONA=m CONFIG_REGULATOR_MC13XXX_CORE=m CONFIG_REGULATOR_MC13783=m CONFIG_REGULATOR_MC13892=m CONFIG_REGULATOR_ISL6271A=m CONFIG_REGULATOR_MAX1586=m CONFIG_REGULATOR_MAX8649=m CONFIG_REGULATOR_MAX8660=m CONFIG_REGULATOR_MAX8952=m CONFIG_REGULATOR_MAX8997=m CONFIG_REGULATOR_PCAP=m CONFIG_REGULATOR_LP3971=m CONFIG_REGULATOR_LP3972=m # CONFIG_REGULATOR_LP872X is not set CONFIG_REGULATOR_TPS6105X=m CONFIG_REGULATOR_TPS62360=m CONFIG_REGULATOR_TPS65023=m CONFIG_REGULATOR_TPS6507X=m CONFIG_REGULATOR_TPS65217=m CONFIG_REGULATOR_TPS6524X=m CONFIG_REGULATOR_TPS65912=m CONFIG_REGULATOR_WM831X=m CONFIG_MEDIA_SUPPORT=m # # Multimedia core support # # CONFIG_MEDIA_CAMERA_SUPPORT is not set # CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set # CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set # CONFIG_MEDIA_RADIO_SUPPORT is not set # CONFIG_MEDIA_RC_SUPPORT is not set # # Media drivers # # # Graphics support # CONFIG_AGP=y CONFIG_AGP_ALI=y CONFIG_AGP_ATI=y CONFIG_AGP_AMD=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y CONFIG_AGP_NVIDIA=y CONFIG_AGP_SIS=y CONFIG_AGP_SWORKS=y CONFIG_AGP_VIA=y CONFIG_AGP_EFFICEON=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_VGA_SWITCHEROO=y CONFIG_DRM=m CONFIG_DRM_USB=m CONFIG_DRM_KMS_HELPER=m # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set CONFIG_DRM_TTM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_RADEON_KMS=y CONFIG_DRM_NOUVEAU=m CONFIG_DRM_NOUVEAU_BACKLIGHT=y # CONFIG_DRM_NOUVEAU_DEBUG is not set # # I2C encoder or helper chips # CONFIG_DRM_I2C_CH7006=m CONFIG_DRM_I2C_SIL164=m CONFIG_DRM_I915=m CONFIG_DRM_I915_KMS=y CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m CONFIG_DRM_SAVAGE=m # CONFIG_DRM_VMWGFX is not set CONFIG_DRM_GMA500=m # CONFIG_DRM_GMA600 is not set # CONFIG_DRM_GMA3600 is not set CONFIG_DRM_UDL=m CONFIG_DRM_AST=m CONFIG_DRM_MGAG200=m CONFIG_DRM_CIRRUS_QEMU=m CONFIG_STUB_POULSBO=m CONFIG_VGASTATE=m CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=m CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=m CONFIG_FB_SYS_COPYAREA=m CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=m # CONFIG_FB_WMT_GE_ROPS is not set CONFIG_FB_DEFERRED_IO=y CONFIG_FB_HECUBA=m CONFIG_FB_SVGALIB=m # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # CONFIG_FB_CIRRUS=m CONFIG_FB_PM2=m CONFIG_FB_PM2_FIFO_DISCONNECT=y CONFIG_FB_CYBER2000=m CONFIG_FB_CYBER2000_DDC=y CONFIG_FB_ARC=m # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m CONFIG_FB_UVESA=m CONFIG_FB_VESA=y CONFIG_FB_EFI=y CONFIG_FB_N411=m CONFIG_FB_HGA=m CONFIG_FB_S1D13XXX=m CONFIG_FB_NVIDIA=m CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_NVIDIA_DEBUG is not set CONFIG_FB_NVIDIA_BACKLIGHT=y CONFIG_FB_RIVA=m CONFIG_FB_RIVA_I2C=y # CONFIG_FB_RIVA_DEBUG is not set CONFIG_FB_RIVA_BACKLIGHT=y CONFIG_FB_I740=m CONFIG_FB_I810=m CONFIG_FB_I810_GTF=y CONFIG_FB_I810_I2C=y CONFIG_FB_LE80578=m CONFIG_FB_CARILLO_RANCH=m CONFIG_FB_INTEL=m # CONFIG_FB_INTEL_DEBUG is not set CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=m CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=m CONFIG_FB_ATY_CT=y CONFIG_FB_ATY_GENERIC_LCD=y CONFIG_FB_ATY_GX=y CONFIG_FB_ATY_BACKLIGHT=y CONFIG_FB_S3=m CONFIG_FB_S3_DDC=y CONFIG_FB_SAVAGE=m CONFIG_FB_SAVAGE_I2C=y CONFIG_FB_SAVAGE_ACCEL=y CONFIG_FB_SIS=m CONFIG_FB_SIS_300=y CONFIG_FB_SIS_315=y CONFIG_FB_VIA=m # CONFIG_FB_VIA_DIRECT_PROCFS is not set # CONFIG_FB_VIA_X_COMPATIBILITY is not set CONFIG_FB_NEOMAGIC=m CONFIG_FB_KYRO=m CONFIG_FB_3DFX=m CONFIG_FB_3DFX_ACCEL=y CONFIG_FB_3DFX_I2C=y CONFIG_FB_VOODOO1=m CONFIG_FB_VT8623=m CONFIG_FB_TRIDENT=m CONFIG_FB_ARK=m CONFIG_FB_PM3=m CONFIG_FB_CARMINE=m CONFIG_FB_CARMINE_DRAM_EVAL=y # CONFIG_CARMINE_DRAM_CUSTOM is not set CONFIG_FB_GEODE=y CONFIG_FB_GEODE_LX=m CONFIG_FB_GEODE_GX=m CONFIG_FB_GEODE_GX1=m CONFIG_FB_TMIO=m CONFIG_FB_TMIO_ACCELL=y CONFIG_FB_SM501=m CONFIG_FB_SMSCUFX=m CONFIG_FB_UDL=m CONFIG_FB_VIRTUAL=m CONFIG_FB_METRONOME=m CONFIG_FB_MB862XX=m CONFIG_FB_MB862XX_PCI_GDC=y CONFIG_FB_MB862XX_I2C=y CONFIG_FB_BROADSHEET=m CONFIG_FB_AUO_K190X=m CONFIG_FB_AUO_K1900=m CONFIG_FB_AUO_K1901=m # CONFIG_EXYNOS_VIDEO is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m CONFIG_LCD_L4F00242T03=m CONFIG_LCD_LMS283GF05=m CONFIG_LCD_LTV350QV=m CONFIG_LCD_ILI9320=m CONFIG_LCD_TDO24M=m CONFIG_LCD_VGG2432A4=m CONFIG_LCD_PLATFORM=m CONFIG_LCD_S6E63M0=m CONFIG_LCD_LD9040=m CONFIG_LCD_AMS369FG06=m CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_LM3533=m CONFIG_BACKLIGHT_PROGEAR=m CONFIG_BACKLIGHT_CARILLO_RANCH=m CONFIG_BACKLIGHT_APPLE=m CONFIG_BACKLIGHT_SAHARA=m CONFIG_BACKLIGHT_WM831X=m CONFIG_BACKLIGHT_ADP5520=m CONFIG_BACKLIGHT_ADP8860=m CONFIG_BACKLIGHT_ADP8870=m CONFIG_BACKLIGHT_LP855X=m CONFIG_BACKLIGHT_OT200=m # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y # CONFIG_SOUND_OSS_CORE_PRECLAIM is not set CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_JACK=y CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_HRTIMER=m CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y # CONFIG_SND_DEBUG_VERBOSE is not set CONFIG_SND_PCM_XRUN_DEBUG=y CONFIG_SND_VMASTER=y CONFIG_SND_KCTL_JACK=y CONFIG_SND_DMA_SGBUF=y CONFIG_SND_RAWMIDI_SEQ=m CONFIG_SND_OPL3_LIB_SEQ=m # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set CONFIG_SND_EMU10K1_SEQ=m CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_VX_LIB=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y # CONFIG_SND_PCSP is not set CONFIG_SND_DUMMY=m CONFIG_SND_ALOOP=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_MTS64=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m CONFIG_SND_PORTMAN2X4=m CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 CONFIG_SND_SB_COMMON=m CONFIG_SND_SB16_DSP=m CONFIG_SND_PCI=y CONFIG_SND_AD1889=m CONFIG_SND_ALS300=m CONFIG_SND_ALS4000=m CONFIG_SND_ALI5451=m CONFIG_SND_ASIHPI=m CONFIG_SND_ATIIXP=m CONFIG_SND_ATIIXP_MODEM=m CONFIG_SND_AU8810=m CONFIG_SND_AU8820=m CONFIG_SND_AU8830=m CONFIG_SND_AW2=m CONFIG_SND_AZT3328=m CONFIG_SND_BT87X=m # CONFIG_SND_BT87X_OVERCLOCK is not set CONFIG_SND_CA0106=m CONFIG_SND_CMIPCI=m CONFIG_SND_OXYGEN_LIB=m CONFIG_SND_OXYGEN=m CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS5530=m CONFIG_SND_CS5535AUDIO=m CONFIG_SND_CTXFI=m CONFIG_SND_DARLA20=m CONFIG_SND_GINA20=m CONFIG_SND_LAYLA20=m CONFIG_SND_DARLA24=m CONFIG_SND_GINA24=m CONFIG_SND_LAYLA24=m CONFIG_SND_MONA=m CONFIG_SND_MIA=m CONFIG_SND_ECHO3G=m CONFIG_SND_INDIGO=m CONFIG_SND_INDIGOIO=m CONFIG_SND_INDIGODJ=m CONFIG_SND_INDIGOIOX=m CONFIG_SND_INDIGODJX=m CONFIG_SND_EMU10K1=m CONFIG_SND_EMU10K1X=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m CONFIG_SND_ES1938=m CONFIG_SND_ES1968=m CONFIG_SND_ES1968_INPUT=y CONFIG_SND_FM801=m CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_PREALLOC_SIZE=64 CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_INPUT_BEEP_MODE=1 CONFIG_SND_HDA_INPUT_JACK=y CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_HDMI=y CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CA0132=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y CONFIG_SND_HDA_POWER_SAVE=y CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 CONFIG_SND_HDSP=m CONFIG_SND_HDSPM=m CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_KORG1212=m CONFIG_SND_LOLA=m CONFIG_SND_LX6464ES=m CONFIG_SND_MAESTRO3=m CONFIG_SND_MAESTRO3_INPUT=y CONFIG_SND_MIXART=m CONFIG_SND_NM256=m CONFIG_SND_PCXHR=m CONFIG_SND_RIPTIDE=m CONFIG_SND_RME32=m CONFIG_SND_RME96=m CONFIG_SND_RME9652=m CONFIG_SND_SIS7019=m CONFIG_SND_SONICVIBES=m CONFIG_SND_TRIDENT=m CONFIG_SND_VIA82XX=m CONFIG_SND_VIA82XX_MODEM=m CONFIG_SND_VIRTUOSO=m CONFIG_SND_VX222=m CONFIG_SND_YMFPCI=m CONFIG_SND_SPI=y CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_UA101=m CONFIG_SND_USB_USX2Y=m CONFIG_SND_USB_CAIAQ=m CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_USB_US122L=m CONFIG_SND_USB_6FIRE=m CONFIG_SND_FIREWIRE=y CONFIG_SND_FIREWIRE_LIB=m CONFIG_SND_FIREWIRE_SPEAKERS=m CONFIG_SND_ISIGHT=m CONFIG_SND_PCMCIA=y CONFIG_SND_VXPOCKET=m CONFIG_SND_PDAUDIOCF=m # CONFIG_SND_SOC is not set CONFIG_SOUND_PRIME=m CONFIG_SOUND_OSS=m CONFIG_SOUND_TRACEINIT=y CONFIG_SOUND_DMAP=y CONFIG_SOUND_VMIDI=m CONFIG_SOUND_TRIX=m CONFIG_SOUND_MSS=m CONFIG_SOUND_MPU401=m CONFIG_SOUND_PAS=m CONFIG_SOUND_PSS=m CONFIG_PSS_MIXER=y # CONFIG_PSS_HAVE_BOOT is not set # CONFIG_SOUND_SB is not set CONFIG_SOUND_YM3812=m CONFIG_SOUND_UART6850=m CONFIG_SOUND_AEDSP16=m CONFIG_SC6600=y CONFIG_SC6600_JOY=y CONFIG_SC6600_CDROM=4 CONFIG_SC6600_CDROMBASE=0 CONFIG_AC97_BUS=m # # HID support # CONFIG_HID=y # CONFIG_HID_BATTERY_STRENGTH is not set CONFIG_HIDRAW=y CONFIG_UHID=m CONFIG_HID_GENERIC=m # # Special HID drivers # CONFIG_HID_A4TECH=y CONFIG_HID_ACRUX=m # CONFIG_HID_ACRUX_FF is not set CONFIG_HID_APPLE=y CONFIG_HID_AUREAL=m CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_PRODIKEYS=m CONFIG_HID_CYPRESS=y CONFIG_HID_DRAGONRISE=y CONFIG_DRAGONRISE_FF=y CONFIG_HID_EMS_FF=m CONFIG_HID_ELECOM=m CONFIG_HID_EZKEY=y CONFIG_HID_HOLTEK=m # CONFIG_HOLTEK_FF is not set CONFIG_HID_KEYTOUCH=m CONFIG_HID_KYE=y CONFIG_HID_UCLOGIC=m CONFIG_HID_WALTOP=m CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LCPOWER=m CONFIG_HID_LENOVO_TPKBD=m CONFIG_HID_LOGITECH=y CONFIG_HID_LOGITECH_DJ=m CONFIG_LOGITECH_FF=y CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_LOGIG940_FF=y CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MAGICMOUSE=m CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y CONFIG_HID_MULTITOUCH=m CONFIG_HID_NTRIG=y CONFIG_HID_ORTEK=y CONFIG_HID_PANTHERLORD=y CONFIG_PANTHERLORD_FF=y CONFIG_HID_PETALYNX=y CONFIG_HID_PICOLCD=m CONFIG_HID_PICOLCD_FB=y CONFIG_HID_PICOLCD_BACKLIGHT=y CONFIG_HID_PICOLCD_LCD=y CONFIG_HID_PICOLCD_LEDS=y CONFIG_HID_PRIMAX=m CONFIG_HID_ROCCAT=m CONFIG_HID_SAITEK=m CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SPEEDLINK=m CONFIG_HID_SUNPLUS=y CONFIG_HID_GREENASIA=y CONFIG_GREENASIA_FF=y CONFIG_HID_HYPERV_MOUSE=m CONFIG_HID_SMARTJOYPLUS=y CONFIG_SMARTJOYPLUS_FF=y CONFIG_HID_TIVO=m CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_THRUSTMASTER_FF=y CONFIG_HID_WACOM=m CONFIG_HID_WIIMOTE=m CONFIG_HID_WIIMOTE_EXT=y CONFIG_HID_ZEROPLUS=y CONFIG_ZEROPLUS_FF=y CONFIG_HID_ZYDACRON=m # # USB HID support # CONFIG_USB_HID=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB_ARCH_HAS_XHCI=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=m CONFIG_USB_WUSB=m CONFIG_USB_WUSB_CBAF=m # CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=m CONFIG_USB_XHCI_HCD=m # CONFIG_USB_XHCI_HCD_DEBUGGING is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OXU210HP_HCD=m CONFIG_USB_ISP116X_HCD=m CONFIG_USB_ISP1760_HCD=m CONFIG_USB_ISP1362_HCD=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_EHCI_HCD_PLATFORM=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_U132_HCD=m CONFIG_USB_SL811_HCD=m # CONFIG_USB_SL811_HCD_ISO is not set CONFIG_USB_SL811_CS=m CONFIG_USB_R8A66597_HCD=m CONFIG_USB_WHCI_HCD=m CONFIG_USB_HWA_HCD=m CONFIG_USB_HCD_BCMA=m CONFIG_USB_HCD_SSB=m CONFIG_USB_CHIPIDEA=m # CONFIG_USB_CHIPIDEA_HOST is not set # CONFIG_USB_CHIPIDEA_DEBUG is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m CONFIG_USB_TMC=m # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_REALTEK=m CONFIG_REALTEK_AUTOPM=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_STORAGE_CYPRESS_ATACB=y CONFIG_USB_STORAGE_ENE_UB6250=m CONFIG_USB_UAS=m # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m # # USB port drivers # CONFIG_USB_USS720=m CONFIG_USB_SERIAL=m CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_AIRCABLE=m CONFIG_USB_SERIAL_ARK3116=m CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_CH341=m CONFIG_USB_SERIAL_WHITEHEAT=m # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set CONFIG_USB_SERIAL_CP210X=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_FUNSOFT=m CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_F81232=m CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m CONFIG_USB_SERIAL_IUU=m CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_METRO=m CONFIG_USB_SERIAL_MOS7720=m CONFIG_USB_SERIAL_MOS7715_PARPORT=y CONFIG_USB_SERIAL_MOS7840=m CONFIG_USB_SERIAL_MOTOROLA=m CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_OTI6858=m CONFIG_USB_SERIAL_QCAUX=m CONFIG_USB_SERIAL_QUALCOMM=m CONFIG_USB_SERIAL_SPCP8X5=m CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_SIEMENS_MPI=m CONFIG_USB_SERIAL_SIERRAWIRELESS=m CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_WWAN=m CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_SERIAL_OPTICON=m CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m CONFIG_USB_SERIAL_ZIO=m CONFIG_USB_SERIAL_SSU100=m CONFIG_USB_SERIAL_QT2=m CONFIG_USB_SERIAL_DEBUG=m # # USB Miscellaneous drivers # CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m CONFIG_USB_SEVSEG=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_LED=m CONFIG_USB_CYPRESS_CY7C63=m CONFIG_USB_CYTHERM=m CONFIG_USB_IDMOUSE=m CONFIG_USB_FTDI_ELAN=m CONFIG_USB_APPLEDISPLAY=m CONFIG_USB_SISUSBVGA=m CONFIG_USB_SISUSBVGA_CON=y CONFIG_USB_LD=m CONFIG_USB_TRANCEVIBRATOR=m CONFIG_USB_IOWARRIOR=m # CONFIG_USB_TEST is not set CONFIG_USB_ISIGHTFW=m CONFIG_USB_YUREX=m # # USB Physical Layer drivers # CONFIG_USB_ISP1301=m CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m CONFIG_USB_CXACRU=m CONFIG_USB_UEAGLEATM=m CONFIG_USB_XUSBATM=m # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set # CONFIG_NOP_USB_XCEIV is not set CONFIG_UWB=m CONFIG_UWB_HWA=m CONFIG_UWB_WHCI=m CONFIG_UWB_I1480U=m CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # CONFIG_MMC_CLKGATE is not set # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_SDIO_UART=m CONFIG_MMC_TEST=m # # MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_SDHCI=m CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_PLTFM=m CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SDRICOH_CS=m CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m CONFIG_MMC_VUB300=m CONFIG_MMC_USHC=m CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set # # MemoryStick drivers # # CONFIG_MEMSTICK_UNSAFE_RESUME is not set CONFIG_MSPRO_BLOCK=m # # MemoryStick Host Controller Drivers # CONFIG_MEMSTICK_TIFM_MS=m CONFIG_MEMSTICK_JMICRON_38X=m CONFIG_MEMSTICK_R592=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # CONFIG_LEDS_LM3530=m CONFIG_LEDS_LM3533=m CONFIG_LEDS_NET48XX=m CONFIG_LEDS_WRAP=m CONFIG_LEDS_PCA9532=m # CONFIG_LEDS_PCA9532_GPIO is not set CONFIG_LEDS_GPIO=m CONFIG_LEDS_LP3944=m CONFIG_LEDS_LP5521=m CONFIG_LEDS_LP5523=m CONFIG_LEDS_CLEVO_MAIL=m CONFIG_LEDS_PCA955X=m CONFIG_LEDS_PCA9633=m CONFIG_LEDS_WM831X_STATUS=m CONFIG_LEDS_DAC124S085=m CONFIG_LEDS_REGULATOR=m CONFIG_LEDS_BD2802=m CONFIG_LEDS_INTEL_SS4200=m CONFIG_LEDS_LT3593=m CONFIG_LEDS_ADP5520=m CONFIG_LEDS_DELL_NETBOOKS=m CONFIG_LEDS_MC13783=m CONFIG_LEDS_TCA6507=m CONFIG_LEDS_MAX8997=m CONFIG_LEDS_LM3556=m CONFIG_LEDS_OT200=m CONFIG_LEDS_BLINKM=m CONFIG_LEDS_TRIGGERS=y # # LED Triggers # CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # # iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=m # CONFIG_ACCESSIBILITY is not set CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_AMSO1100=m # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set CONFIG_INFINIBAND_CXGB3=m # CONFIG_INFINIBAND_CXGB3_DEBUG is not set CONFIG_INFINIBAND_CXGB4=m CONFIG_MLX4_INFINIBAND=m CONFIG_INFINIBAND_NES=m # CONFIG_INFINIBAND_NES_DEBUG is not set CONFIG_INFINIBAND_OCRDMA=m CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m CONFIG_INFINIBAND_ISER=m CONFIG_EDAC=y # # Reporting subsystems # CONFIG_EDAC_LEGACY_SYSFS=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_DECODE_MCE=m CONFIG_EDAC_MCE_INJ=m CONFIG_EDAC_MM_EDAC=m CONFIG_EDAC_AMD76X=m CONFIG_EDAC_E7XXX=m CONFIG_EDAC_E752X=m CONFIG_EDAC_I82875P=m CONFIG_EDAC_I82975X=m CONFIG_EDAC_I3000=m CONFIG_EDAC_I3200=m CONFIG_EDAC_X38=m CONFIG_EDAC_I5400=m CONFIG_EDAC_I7CORE=m CONFIG_EDAC_I82860=m CONFIG_EDAC_R82600=m CONFIG_EDAC_I5000=m CONFIG_EDAC_I5100=m CONFIG_EDAC_I7300=m CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_TEST=m # # I2C RTC drivers # CONFIG_RTC_DRV_88PM80X=m CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_DS1374=m CONFIG_RTC_DRV_DS1672=m CONFIG_RTC_DRV_DS3232=m CONFIG_RTC_DRV_MAX6900=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_ISL12022=m CONFIG_RTC_DRV_X1205=m CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_FM3130=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_RX8025=m CONFIG_RTC_DRV_EM3027=m CONFIG_RTC_DRV_RV3029C2=m # # SPI RTC drivers # CONFIG_RTC_DRV_M41T93=m CONFIG_RTC_DRV_M41T94=m CONFIG_RTC_DRV_DS1305=m CONFIG_RTC_DRV_DS1390=m CONFIG_RTC_DRV_MAX6902=m CONFIG_RTC_DRV_R9701=m CONFIG_RTC_DRV_RS5C348=m CONFIG_RTC_DRV_DS3234=m CONFIG_RTC_DRV_PCF2123=m # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_DS1286=m CONFIG_RTC_DRV_DS1511=m CONFIG_RTC_DRV_DS1553=m CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_STK17TA8=m CONFIG_RTC_DRV_M48T86=m CONFIG_RTC_DRV_M48T35=m CONFIG_RTC_DRV_M48T59=m CONFIG_RTC_DRV_MSM6242=m CONFIG_RTC_DRV_BQ4802=m CONFIG_RTC_DRV_RP5C01=m CONFIG_RTC_DRV_V3020=m CONFIG_RTC_DRV_WM831X=m # # on-CPU RTC drivers # CONFIG_RTC_DRV_PCAP=m CONFIG_RTC_DRV_MC13XXX=m CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # CONFIG_INTEL_MID_DMAC=m CONFIG_INTEL_IOATDMA=m CONFIG_TIMB_DMA=m CONFIG_PCH_DMA=m CONFIG_DMA_ENGINE=y # # DMA Clients # CONFIG_NET_DMA=y CONFIG_ASYNC_TX_DMA=y CONFIG_DMATEST=m CONFIG_DCA=m CONFIG_AUXDISPLAY=y CONFIG_KS0108=m CONFIG_KS0108_PORT=0x378 CONFIG_KS0108_DELAY=2 CONFIG_CFAG12864B=m CONFIG_CFAG12864B_RATE=20 CONFIG_UIO=m CONFIG_UIO_CIF=m CONFIG_UIO_PDRV=m CONFIG_UIO_PDRV_GENIRQ=m CONFIG_UIO_AEC=m CONFIG_UIO_SERCOS3=m CONFIG_UIO_PCI_GENERIC=m CONFIG_UIO_NETX=m CONFIG_VIRTIO=m CONFIG_VIRTIO_RING=m # # Virtio drivers # CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m # CONFIG_VIRTIO_MMIO is not set # # Microsoft Hyper-V guest support # CONFIG_HYPERV=m CONFIG_HYPERV_UTILS=m CONFIG_STAGING=y CONFIG_ET131X=m CONFIG_SLICOSS=m CONFIG_USBIP_CORE=m CONFIG_USBIP_VHCI_HCD=m CONFIG_USBIP_HOST=m # CONFIG_USBIP_DEBUG is not set CONFIG_W35UND=m CONFIG_PRISM2_USB=m CONFIG_ECHO=m # CONFIG_COMEDI is not set CONFIG_ASUS_OLED=m CONFIG_PANEL=m CONFIG_PANEL_PARPORT=0 CONFIG_PANEL_PROFILE=5 # CONFIG_PANEL_CHANGE_MESSAGE is not set CONFIG_R8187SE=m CONFIG_RTL8192U=m CONFIG_RTLLIB=m CONFIG_RTLLIB_CRYPTO_CCMP=m CONFIG_RTLLIB_CRYPTO_TKIP=m CONFIG_RTLLIB_CRYPTO_WEP=m CONFIG_RTL8192E=m CONFIG_R8712U=m CONFIG_RTS_PSTOR=m # CONFIG_RTS_PSTOR_DEBUG is not set CONFIG_RTS5139=m # CONFIG_RTS5139_DEBUG is not set CONFIG_TRANZPORT=m CONFIG_IDE_PHISON=m CONFIG_LINE6_USB=m # CONFIG_LINE6_USB_DEBUG is not set # CONFIG_LINE6_USB_DUMP_CTRL is not set # CONFIG_LINE6_USB_DUMP_MIDI is not set # CONFIG_LINE6_USB_DUMP_PCM is not set # CONFIG_LINE6_USB_RAW is not set # CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set CONFIG_USB_SERIAL_QUATECH2=m CONFIG_VT6655=m CONFIG_VT6656=m CONFIG_DX_SEP=m # # IIO staging drivers # CONFIG_IIO_ST_HWMON=m CONFIG_IIO_SW_RING=m # # Accelerometers # CONFIG_ADIS16201=m CONFIG_ADIS16203=m CONFIG_ADIS16204=m CONFIG_ADIS16209=m CONFIG_ADIS16220=m CONFIG_ADIS16240=m CONFIG_KXSD9=m CONFIG_LIS3L02DQ=m CONFIG_LIS3L02DQ_BUF_KFIFO=y # CONFIG_LIS3L02DQ_BUF_RING_SW is not set CONFIG_SCA3000=m # # Analog to digital converters # CONFIG_AD7291=m CONFIG_AD7298=m CONFIG_AD7606=m CONFIG_AD7606_IFACE_PARALLEL=m CONFIG_AD7606_IFACE_SPI=m CONFIG_AD799X=m CONFIG_AD799X_RING_BUFFER=y CONFIG_AD7476=m CONFIG_AD7887=m CONFIG_AD7780=m CONFIG_AD7793=m CONFIG_AD7816=m CONFIG_AD7192=m CONFIG_ADT7310=m CONFIG_ADT7410=m CONFIG_AD7280=m CONFIG_MAX1363=m CONFIG_MAX1363_RING_BUFFER=y # # Analog digital bi-direction converters # CONFIG_ADT7316=m CONFIG_ADT7316_SPI=m CONFIG_ADT7316_I2C=m # # Capacitance to digital converters # CONFIG_AD7150=m CONFIG_AD7152=m CONFIG_AD7746=m # # Direct Digital Synthesis # CONFIG_AD5930=m CONFIG_AD9832=m CONFIG_AD9834=m CONFIG_AD9850=m CONFIG_AD9852=m CONFIG_AD9910=m CONFIG_AD9951=m # # Digital gyroscope sensors # CONFIG_ADIS16060=m CONFIG_ADIS16080=m CONFIG_ADIS16130=m CONFIG_ADIS16260=m CONFIG_ADXRS450=m # # Network Analyzer, Impedance Converters # CONFIG_AD5933=m # # Inertial measurement units # CONFIG_ADIS16400=m # # Light sensors # CONFIG_SENSORS_ISL29018=m CONFIG_SENSORS_ISL29028=m CONFIG_SENSORS_TSL2563=m CONFIG_TSL2583=m CONFIG_TSL2x7x=m # # Magnetometer sensors # CONFIG_SENSORS_AK8975=m CONFIG_SENSORS_HMC5843=m # # Active energy metering IC # CONFIG_ADE7753=m CONFIG_ADE7754=m CONFIG_ADE7758=m CONFIG_ADE7759=m CONFIG_ADE7854=m CONFIG_ADE7854_I2C=m CONFIG_ADE7854_SPI=m # # Resolver to digital converters # CONFIG_AD2S90=m CONFIG_AD2S1200=m CONFIG_AD2S1210=m # # Triggers - standalone # CONFIG_IIO_PERIODIC_RTC_TRIGGER=m CONFIG_IIO_GPIO_TRIGGER=m CONFIG_IIO_SYSFS_TRIGGER=m CONFIG_IIO_SIMPLE_DUMMY=m # CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set # CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set CONFIG_ZRAM=m # CONFIG_ZRAM_DEBUG is not set CONFIG_ZCACHE=y CONFIG_ZSMALLOC=y CONFIG_WLAGS49_H2=m CONFIG_WLAGS49_H25=m CONFIG_FB_SM7XX=m CONFIG_CRYSTALHD=m CONFIG_CXT1E1=m CONFIG_SBE_PMCC4_NCOMM=y CONFIG_FB_XGI=m CONFIG_ACPI_QUICKSTART=m CONFIG_SBE_2T3E3=m CONFIG_USB_ENESTORAGE=m CONFIG_BCM_WIMAX=m CONFIG_FT1000=m CONFIG_FT1000_USB=m CONFIG_FT1000_PCMCIA=m # # Speakup console speech # CONFIG_SPEAKUP=m CONFIG_SPEAKUP_SYNTH_ACNTSA=m CONFIG_SPEAKUP_SYNTH_ACNTPC=m CONFIG_SPEAKUP_SYNTH_APOLLO=m CONFIG_SPEAKUP_SYNTH_AUDPTR=m CONFIG_SPEAKUP_SYNTH_BNS=m CONFIG_SPEAKUP_SYNTH_DECTLK=m CONFIG_SPEAKUP_SYNTH_DECEXT=m CONFIG_SPEAKUP_SYNTH_DECPC=m CONFIG_SPEAKUP_SYNTH_DTLK=m CONFIG_SPEAKUP_SYNTH_KEYPC=m CONFIG_SPEAKUP_SYNTH_LTLK=m CONFIG_SPEAKUP_SYNTH_SOFT=m CONFIG_SPEAKUP_SYNTH_SPKOUT=m CONFIG_SPEAKUP_SYNTH_TXPRT=m CONFIG_SPEAKUP_SYNTH_DUMMY=m CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m # CONFIG_STAGING_MEDIA is not set # # Android # CONFIG_ANDROID=y CONFIG_ANDROID_BINDER_IPC=y CONFIG_ASHMEM=y CONFIG_ANDROID_LOGGER=m CONFIG_ANDROID_TIMED_OUTPUT=y CONFIG_ANDROID_TIMED_GPIO=m # CONFIG_ANDROID_LOW_MEMORY_KILLER is not set CONFIG_ANDROID_INTF_ALARM_DEV=y CONFIG_PHONE=m CONFIG_PHONE_IXJ=m CONFIG_PHONE_IXJ_PCMCIA=m CONFIG_USB_WPAN_HCD=m CONFIG_IPACK_BUS=m CONFIG_BOARD_TPCI200=m CONFIG_SERIAL_IPOCTAL=m CONFIG_WIMAX_GDM72XX=m # CONFIG_WIMAX_GDM72XX_QOS is not set # CONFIG_WIMAX_GDM72XX_K_MODE is not set # CONFIG_WIMAX_GDM72XX_WIMAX2 is not set CONFIG_WIMAX_GDM72XX_USB=y # CONFIG_WIMAX_GDM72XX_SDIO is not set # CONFIG_WIMAX_GDM72XX_USB_PM is not set CONFIG_CSR_WIFI=m CONFIG_X86_PLATFORM_DEVICES=y CONFIG_ACER_WMI=m CONFIG_ACERHDF=m CONFIG_ASUS_LAPTOP=m CONFIG_DELL_LAPTOP=m CONFIG_DELL_WMI=m CONFIG_DELL_WMI_AIO=m CONFIG_FUJITSU_LAPTOP=m # CONFIG_FUJITSU_LAPTOP_DEBUG is not set CONFIG_FUJITSU_TABLET=m CONFIG_AMILO_RFKILL=m CONFIG_TC1100_WMI=m CONFIG_HP_ACCEL=m CONFIG_HP_WMI=m CONFIG_MSI_LAPTOP=m CONFIG_PANASONIC_LAPTOP=m CONFIG_COMPAL_LAPTOP=m CONFIG_SONY_LAPTOP=m CONFIG_SONYPI_COMPAT=y CONFIG_IDEAPAD_LAPTOP=m CONFIG_THINKPAD_ACPI=m CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y # CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set # CONFIG_THINKPAD_ACPI_DEBUG is not set # CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set CONFIG_THINKPAD_ACPI_VIDEO=y CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y CONFIG_SENSORS_HDAPS=m # CONFIG_INTEL_MENLOW is not set CONFIG_EEEPC_LAPTOP=m CONFIG_ASUS_WMI=m CONFIG_ASUS_NB_WMI=m CONFIG_EEEPC_WMI=m CONFIG_ACPI_WMI=m CONFIG_MSI_WMI=m CONFIG_TOPSTAR_LAPTOP=m CONFIG_ACPI_TOSHIBA=m CONFIG_TOSHIBA_BT_RFKILL=m CONFIG_ACPI_CMPC=m CONFIG_INTEL_IPS=m CONFIG_IBM_RTL=m CONFIG_XO15_EBOOK=m CONFIG_SAMSUNG_LAPTOP=m CONFIG_MXM_WMI=m CONFIG_INTEL_OAKTRAIL=m CONFIG_SAMSUNG_Q10=m CONFIG_APPLE_GMUX=m # # Hardware Spinlock drivers # CONFIG_CLKSRC_I8253=y CONFIG_CLKEVT_I8253=y CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y CONFIG_IOMMU_SUPPORT=y # CONFIG_INTEL_IOMMU is not set # # Remoteproc drivers (EXPERIMENTAL) # # # Rpmsg drivers (EXPERIMENTAL) # # CONFIG_VIRT_DRIVERS is not set # CONFIG_PM_DEVFREQ is not set CONFIG_EXTCON=m # # Extcon Device Drivers # CONFIG_EXTCON_GPIO=m CONFIG_EXTCON_MAX8997=m CONFIG_EXTCON_ARIZONA=m # CONFIG_MEMORY is not set CONFIG_IIO=m CONFIG_IIO_BUFFER=y CONFIG_IIO_KFIFO_BUF=m CONFIG_IIO_TRIGGERED_BUFFER=m CONFIG_IIO_TRIGGER=y CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # # Analog to digital converters # CONFIG_AD7266=m # # Amplifiers # CONFIG_AD8366=m # # Light sensors # CONFIG_ADJD_S311=m CONFIG_SENSORS_LM3533=m CONFIG_VCNL4000=m # # Frequency Synthesizers DDS/PLL # # # Clock Generator/Distribution # CONFIG_AD9523=m # # Phase-Locked Loop (PLL) frequency synthesizers # CONFIG_ADF4350=m # # Digital to analog converters # CONFIG_AD5064=m CONFIG_AD5360=m CONFIG_AD5380=m CONFIG_AD5421=m CONFIG_AD5624R_SPI=m CONFIG_AD5446=m CONFIG_AD5504=m CONFIG_AD5764=m CONFIG_AD5791=m CONFIG_AD5686=m CONFIG_MAX517=m CONFIG_MCP4725=m CONFIG_VME_BUS=m # # VME Bridge Drivers # CONFIG_VME_CA91CX42=m CONFIG_VME_TSI148=m # # VME Board Drivers # CONFIG_VMIVME_7805=m # # VME Device Drivers # CONFIG_VME_USER=m CONFIG_VME_PIO2=m # CONFIG_PWM is not set # # Firmware Drivers # CONFIG_EDD=m # CONFIG_EDD_OFF is not set CONFIG_FIRMWARE_MEMMAP=y CONFIG_EFI_VARS=m CONFIG_DELL_RBU=m CONFIG_DCDBAS=m CONFIG_DMIID=y CONFIG_DMI_SYSFS=m CONFIG_ISCSI_IBFT_FIND=y CONFIG_ISCSI_IBFT=m # CONFIG_GOOGLE_FIRMWARE is not set # # File systems # CONFIG_DCACHE_WORD_ACCESS=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=m CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set CONFIG_JFS_STATISTICS=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=m # CONFIG_GFS2_FS_LOCKING_DLM is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m CONFIG_OCFS2_FS_STATS=y # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set CONFIG_NILFS2_FS=m CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=m CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m CONFIG_CUSE=m CONFIG_GENERIC_ACL=y # # Caches # CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set CONFIG_FSCACHE_OBJECT_LIST=y CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=m CONFIG_MISC_FILESYSTEMS=y CONFIG_ADFS_FS=m CONFIG_ADFS_FS_RW=y CONFIG_AFFS_FS=m CONFIG_ECRYPT_FS=m CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y CONFIG_JFFS2_FS_POSIX_ACL=y CONFIG_JFFS2_FS_SECURITY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_JFFS2_CMODE_NONE is not set CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set CONFIG_UBIFS_FS=m CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y CONFIG_LOGFS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 CONFIG_VXFS_FS=m CONFIG_MINIX_FS=m CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m CONFIG_QNX6FS_FS=m # CONFIG_QNX6FS_DEBUG is not set CONFIG_ROMFS_FS=m # CONFIG_ROMFS_BACKED_BY_BLOCK is not set # CONFIG_ROMFS_BACKED_BY_MTD is not set CONFIG_ROMFS_BACKED_BY_BOTH=y CONFIG_ROMFS_ON_BLOCK=y CONFIG_ROMFS_ON_MTD=y CONFIG_PSTORE=y # CONFIG_PSTORE_CONSOLE is not set CONFIG_PSTORE_RAM=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_UFS_FS_WRITE=y # CONFIG_UFS_DEBUG is not set CONFIG_EXOFS_FS=m # CONFIG_EXOFS_DEBUG is not set CONFIG_ORE=m CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V2=m CONFIG_NFS_V3=m CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=m # CONFIG_NFS_SWAP is not set # CONFIG_NFS_V4_1 is not set CONFIG_NFS_FSCACHE=y # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y # CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_XPRT_RDMA=m CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_SUNRPC_DEBUG is not set CONFIG_CEPH_FS=m CONFIG_CIFS=m CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set CONFIG_CIFS_DFS_UPCALL=y # CONFIG_CIFS_FSCACHE is not set CONFIG_CIFS_ACL=y CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y CONFIG_NCPFS_SMALLDOS=y CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set CONFIG_AFS_FSCACHE=y CONFIG_9P_FS=m # CONFIG_9P_FSCACHE is not set CONFIG_9P_FS_POSIX_ACL=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_MAC_ROMAN=m CONFIG_NLS_MAC_CELTIC=m CONFIG_NLS_MAC_CENTEURO=m CONFIG_NLS_MAC_CROATIAN=m CONFIG_NLS_MAC_CYRILLIC=m CONFIG_NLS_MAC_GAELIC=m CONFIG_NLS_MAC_GREEK=m CONFIG_NLS_MAC_ICELAND=m CONFIG_NLS_MAC_INUIT=m CONFIG_NLS_MAC_ROMANIAN=m CONFIG_NLS_MAC_TURKISH=m CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_LOCKUP_DETECTOR is not set # CONFIG_HARDLOCKUP_DETECTOR is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 # CONFIG_DETECT_HUNG_TASK is not set CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_INFO_REDUCED is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_TEST_LIST_SORT is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_RCU_CPU_STALL_VERBOSE is not set # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_LKDTM=m # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_RING_BUFFER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set # CONFIG_BUILD_DOCSRC is not set CONFIG_DYNAMIC_DEBUG=y # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_KMEMCHECK is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_STRICT_DEVMEM is not set # CONFIG_X86_VERBOSE_BOOTUP is not set # CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_X86_PTDUMP is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_DEBUG_SET_MODULE_RONX is not set # CONFIG_DEBUG_NX_TEST is not set # CONFIG_DOUBLEFAULT is not set # CONFIG_DEBUG_TLBFLUSH is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y # CONFIG_X86_DECODER_SELFTEST is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # CONFIG_OPTIMIZE_INLINING is not set # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set # CONFIG_DEBUG_NMI_SELFTEST is not set # # Security options # CONFIG_KEYS=y CONFIG_TRUSTED_KEYS=m CONFIG_ENCRYPTED_KEYS=m # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y CONFIG_LSM_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set # CONFIG_SECURITY_TOMOYO is not set CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 # CONFIG_SECURITY_YAMA is not set # CONFIG_IMA is not set # CONFIG_DEFAULT_SECURITY_SELINUX is not set CONFIG_DEFAULT_SECURITY_APPARMOR=y # CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="apparmor" CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_ASYNC_PQ=m CONFIG_ASYNC_RAID6_RECOV=m CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_ABLK_HELPER_X86=m CONFIG_CRYPTO_GLUE_HELPER_X86=m # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_SEQIV=m # # Block modes # CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=m CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_586=m CONFIG_CRYPTO_AES_NI_INTEL=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_BLOWFISH_COMMON=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SALSA20_586=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SERPENT_SSE2_586=m CONFIG_CRYPTO_TEA=m # CONFIG_CRYPTO_TWOFISH is not set CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_TWOFISH_586=m # # Compression # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=y # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_USER_API=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m CONFIG_CRYPTO_DEV_GEODE=m CONFIG_CRYPTO_DEV_HIFN_795X=m CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_HAVE_KVM_MSI=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m CONFIG_VHOST_NET=m CONFIG_TCM_VHOST=m # CONFIG_LGUEST is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_RAID6_PQ=m CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IO=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set CONFIG_CRC7=m CONFIG_LIBCRC32C=y CONFIG_CRC8=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y CONFIG_XZ_DEC_IA64=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_BCJ=y CONFIG_XZ_DEC_TEST=m CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_REED_SOLOMON=m CONFIG_REED_SOLOMON_ENC8=y CONFIG_REED_SOLOMON_DEC8=y CONFIG_REED_SOLOMON_DEC16=y CONFIG_BCH=m CONFIG_BCH_CONST_PARAMS=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_BTREE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y CONFIG_LRU_CACHE=m CONFIG_AVERAGE=y CONFIG_CORDIC=m # CONFIG_DDR is not set [-- Attachment #3: dmesg-dvi2hdmi-3.6.2-2 --] [-- Type: text/plain, Size: 49285 bytes --] [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.2 (root@geexbox) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Sun Oct 14 02:03:31 EDT 2012 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9e5efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9e5f000-0x00000000da25afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da25b000-0x00000000da266fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da267000-0x00000000da2f2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da2f3000-0x00000000da2f8fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da2f9000-0x00000000da37afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da37b000-0x00000000da40cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da40d000-0x00000000da6a2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da6a3000-0x00000000da6a3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da6a4000-0x00000000da6e6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da6e7000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: /DH77DF, BIOS KCH7710H.86A.0095.2012.0608.1754 06/08/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 5 base 21F800000 mask FFF800000 uncachable [ 0.000000] 6 base 21F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [c00fd770] [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x00bfa000-0x00bfffff] [ 0.000000] RAMDISK: [mem 0x1e6bb000-0x1ffeffff] [ 0.000000] ACPI: RSDP 000f0490 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT da25b070 00064 (v01 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: FACP da264db8 000F4 (v04 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: DSDT da25b168 09C49 (v02 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: FACS da40bf80 00040 [ 0.000000] ACPI: APIC da264eb0 00072 (v03 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: FPDT da264f28 00044 (v01 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: MCFG da264f70 0003C (v01 INTEL DH77DF 0000005F MSFT 00000097) [ 0.000000] ACPI: HPET da264fb0 00038 (v01 INTEL DH77DF 0000005F AMI. 00000005) [ 0.000000] ACPI: SSDT da264fe8 0036D (v01 INTEL DH77DF 0000005F INTL 20091112) [ 0.000000] ACPI: SSDT da265358 009AA (v01 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: SSDT da265d08 00A92 (v01 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2616MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0xdaffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xd9e5efff] [ 0.000000] node 0: [mem 0xda2f9000-0xda37afff] [ 0.000000] node 0: [mem 0xda6a3000-0xda6a3fff] [ 0.000000] node 0: [mem 0xda6e7000-0xdaffffff] [ 0.000000] On node 0 totalpages: 894343 [ 0.000000] free_area_init_node: node 0, pgdat c0894340, node_mem_map f5c9d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 220974 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5233 pages used for memmap [ 0.000000] HighMem zone: 662411 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5c5b000 s26944 r0 d22208 u49152 [ 0.000000] pcpu-alloc: s26944 r0 d22208 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 887334 [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 video=1024x768 noresume splash=silent quiet apm=off nomodeset vga=normal drm.debug=0xe irqpoll [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Initializing HighMem for node 0 (000377fe:000db000) [ 0.000000] Memory: 3514632k/3588096k available (4577k kernel code, 62740k reserved, 2220k data, 452k init, 2670576k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc08a4000 - 0xc0915000 ( 452 kB) [ 0.000000] .data : 0xc0678452 - 0xc08a3800 (2220 kB) [ 0.000000] .text : 0xc0200000 - 0xc0678452 (4577 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.003333] tsc: Detected 3392.281 MHz processor [ 0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.25 BogoMIPS (lpj=11307603) [ 0.000002] pid_max: default: 32768 minimum: 301 [ 0.000015] Security Framework initialized [ 0.000024] AppArmor: AppArmor initialized [ 0.000028] Mount-cache hash table entries: 512 [ 0.000135] Initializing cgroup subsys net_cls [ 0.000136] Initializing cgroup subsys blkio [ 0.000153] CPU: Physical Processor ID: 0 [ 0.000153] CPU: Processor Core ID: 0 [ 0.000156] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000156] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000691] mce: CPU supports 9 MCE banks [ 0.000701] CPU0: Thermal monitoring enabled (TM1) [ 0.000705] process: using mwait in idle threads [ 0.000710] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.000710] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000710] tlb_flushall_shift is 0x1 [ 0.001274] ACPI: Core revision 20120711 [ 0.007323] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.007744] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040653] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz stepping 09 [ 0.146598] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver. [ 0.146602] ... version: 3 [ 0.146603] ... bit width: 48 [ 0.146604] ... generic registers: 8 [ 0.146604] ... value mask: 0000ffffffffffff [ 0.146605] ... max period: 000000007fffffff [ 0.146606] ... fixed-purpose events: 3 [ 0.146606] ... event mask: 00000007000000ff [ 0.193137] CPU 1 irqstacks, hard=f54b0000 soft=f54b2000 [ 0.203365] Initializing CPU#1 [ 0.193139] smpboot: Booting Node 0, Processors #1 [ 0.219726] CPU 2 irqstacks, hard=f54c6000 soft=f54c8000 [ 0.229993] Initializing CPU#2 [ 0.219729] #2 [ 0.246316] CPU 3 irqstacks, hard=f54e0000 soft=f54e2000 [ 0.246319] #3 OK [ 0.256585] Initializing CPU#3 [ 0.260020] Brought up 4 CPUs [ 0.260022] smpboot: Total of 4 processors activated (27149.00 BogoMIPS) [ 0.262492] devtmpfs: initialized [ 0.262661] PM: Registering ACPI NVS region [mem 0xda37b000-0xda40cfff] (598016 bytes) [ 0.262666] PM: Registering ACPI NVS region [mem 0xda6a4000-0xda6e6fff] (274432 bytes) [ 0.262719] dummy: [ 0.262745] RTC time: 11:24:15, date: 10/14/12 [ 0.262768] NET: Registered protocol family 16 [ 0.299611] ACPI: bus type pci registered [ 0.299655] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.299657] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.299658] PCI: Using MMCONFIG for extended config space [ 0.299659] PCI: Using configuration type 1 for base access [ 0.300114] bio: create slab <bio-0> at 0 [ 0.300151] ACPI: Added _OSI(Module Device) [ 0.300152] ACPI: Added _OSI(Processor Device) [ 0.300153] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.300154] ACPI: Added _OSI(Processor Aggregator Device) [ 0.301481] ACPI: EC: Look up EC in DSDT [ 0.302999] ACPI: Executed 1 blocks of module-level executable AML code [ 0.313514] ACPI: SSDT da293018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.313850] ACPI: Dynamic OEM Table Load: [ 0.313852] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.322978] ACPI: SSDT da294a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.323345] ACPI: Dynamic OEM Table Load: [ 0.323346] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.333138] ACPI: SSDT da299c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.333475] ACPI: Dynamic OEM Table Load: [ 0.333477] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.343633] ACPI: Interpreter enabled [ 0.343638] ACPI: (supports S0 S3 S4 S5) [ 0.343650] ACPI: Using IOAPIC for interrupt routing [ 0.347618] ACPI: Power Resource [FN00] (off) [ 0.347668] ACPI: Power Resource [FN01] (off) [ 0.347715] ACPI: Power Resource [FN02] (off) [ 0.347763] ACPI: Power Resource [FN03] (off) [ 0.347810] ACPI: Power Resource [FN04] (off) [ 0.348168] ACPI: No dock devices found. [ 0.348171] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.348403] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.348733] PCI host bridge to bus 0000:00 [ 0.348735] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff] [ 0.348736] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.348737] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.348738] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.348740] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.348741] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.348742] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.348743] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.348744] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.348745] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.348746] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.348747] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.348753] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.348782] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.348805] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.348822] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000 [ 0.348830] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.348834] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.348837] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 0.348877] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.348897] pci 0000:00:14.0: reg 10: [mem 0xf7d20000-0xf7d2ffff 64bit] [ 0.348963] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.348983] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.349004] pci 0000:00:16.0: reg 10: [mem 0xf7d37000-0xf7d3700f 64bit] [ 0.349075] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.349101] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.349117] pci 0000:00:19.0: reg 10: [mem 0xf7d00000-0xf7d1ffff] [ 0.349125] pci 0000:00:19.0: reg 14: [mem 0xf7d35000-0xf7d35fff] [ 0.349133] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f] [ 0.349190] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.349213] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.349232] pci 0000:00:1a.0: reg 10: [mem 0xf7d34000-0xf7d343ff] [ 0.349314] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.349341] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.349471] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.349508] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 0.349580] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.349605] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.349624] pci 0000:00:1d.0: reg 10: [mem 0xf7d33000-0xf7d333ff] [ 0.349707] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.349730] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100 [ 0.349845] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.349861] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7] [ 0.349868] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3] [ 0.349875] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7] [ 0.349882] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3] [ 0.349890] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 0.349897] pci 0000:00:1f.2: reg 24: [mem 0xf7d32000-0xf7d327ff] [ 0.349937] pci 0000:00:1f.2: PME# supported from D3hot [ 0.349953] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.349966] pci 0000:00:1f.3: reg 10: [mem 0xf7d31000-0xf7d310ff 64bit] [ 0.349985] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 0.350023] pci_bus 0000:01: busn_res: [bus 01-02] is inserted under [bus 00-3e] [ 0.350040] pci 0000:01:00.0: [10b5:8112] type 01 class 0x060400 [ 0.350146] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.350153] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.350155] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.350201] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 01-02] [ 0.350221] pci 0000:02:04.0: [13f6:8788] type 00 class 0x040100 [ 0.350244] pci 0000:02:04.0: reg 10: [io 0xe000-0xe0ff] [ 0.350354] pci 0000:02:04.0: supports D1 D2 [ 0.350406] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.350410] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.350494] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e] [ 0.350497] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.350549] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-3e] [ 0.350551] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.350555] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.350559] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.350577] pci_bus 0000:00: on NUMA node 0 [ 0.350579] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.350666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.350694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT] [ 0.350716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.350807] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.350945] pci0000:00: ACPI _OSC control (0x18) granted [ 0.353799] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.353839] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.353876] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.353913] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.353950] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.353987] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.354021] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.354057] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.354101] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.354104] vgaarb: loaded [ 0.354104] vgaarb: bridge control possible 0000:00:02.0 [ 0.354163] SCSI subsystem initialized [ 0.354164] ACPI: bus type scsi registered [ 0.354181] libata version 3.00 loaded. [ 0.354191] ACPI: bus type usb registered [ 0.354199] usbcore: registered new interface driver usbfs [ 0.354204] usbcore: registered new interface driver hub [ 0.354215] usbcore: registered new device driver usb [ 0.354241] PCI: Using ACPI for IRQ routing [ 0.355609] PCI: pci_cache_line_size set to 64 bytes [ 0.355656] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.355657] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.355658] e820: reserve RAM buffer [mem 0xd9e5f000-0xdbffffff] [ 0.355660] e820: reserve RAM buffer [mem 0xda37b000-0xdbffffff] [ 0.355661] e820: reserve RAM buffer [mem 0xda6a4000-0xdbffffff] [ 0.355662] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.355712] NetLabel: Initializing [ 0.355712] NetLabel: domain hash size = 128 [ 0.355713] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.355719] NetLabel: unlabeled traffic allowed by default [ 0.355772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.355775] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.357781] Switching to clocksource hpet [ 0.357822] AppArmor: AppArmor Filesystem Enabled [ 0.357830] pnp: PnP ACPI init [ 0.357835] ACPI: bus type pnp registered [ 0.358016] pnp 00:00: [bus 00-3e] [ 0.358017] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.358018] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.358019] pnp 00:00: [io 0x0d00-0xffff window] [ 0.358021] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.358022] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.358023] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.358024] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.358025] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.358026] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.358028] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.358029] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.358030] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.358031] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.358032] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.358033] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.358034] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.358035] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.358036] pnp 00:00: [mem 0xdfa00000-0xfeafffff window] [ 0.358037] pnp 00:00: [mem 0x00010000-0x0001ffff window] [ 0.358068] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.358084] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.358101] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.358103] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.358110] pnp 00:02: [io 0x0000-0x001f] [ 0.358111] pnp 00:02: [io 0x0081-0x0091] [ 0.358112] pnp 00:02: [io 0x0093-0x009f] [ 0.358113] pnp 00:02: [io 0x00c0-0x00df] [ 0.358114] pnp 00:02: [dma 4] [ 0.358125] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.358130] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.358140] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.358196] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.358207] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.358215] pnp 00:05: [io 0x002e-0x002f] [ 0.358216] pnp 00:05: [io 0x004e-0x004f] [ 0.358217] pnp 00:05: [io 0x0061] [ 0.358218] pnp 00:05: [io 0x0063] [ 0.358219] pnp 00:05: [io 0x0065] [ 0.358219] pnp 00:05: [io 0x0067] [ 0.358220] pnp 00:05: [io 0x0070] [ 0.358221] pnp 00:05: [io 0x0080] [ 0.358222] pnp 00:05: [io 0x0092] [ 0.358223] pnp 00:05: [io 0x00b2-0x00b3] [ 0.358224] pnp 00:05: [io 0x0680-0x069f] [ 0.358225] pnp 00:05: [io 0x1000-0x100f] [ 0.358226] pnp 00:05: [io 0xffff] [ 0.358227] pnp 00:05: [io 0xffff] [ 0.358228] pnp 00:05: [io 0x0400-0x0453] [ 0.358230] pnp 00:05: [io 0x0458-0x047f] [ 0.358231] pnp 00:05: [io 0x0500-0x057f] [ 0.358232] pnp 00:05: [io 0x164e-0x164f] [ 0.358251] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.358253] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.358254] system 00:05: [io 0xffff] has been reserved [ 0.358255] system 00:05: [io 0xffff] has been reserved [ 0.358256] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.358257] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.358259] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.358260] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.358261] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.358266] pnp 00:06: [io 0x0070-0x0077] [ 0.358274] pnp 00:06: [irq 8] [ 0.358285] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.358302] pnp 00:07: [io 0x0454-0x0457] [ 0.358319] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.358321] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.358375] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.358377] pnp 00:08: [io 0x0a30-0x0a3f] [ 0.358378] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.358379] pnp 00:08: [io 0x0250-0x025f] [ 0.358396] system 00:08: [io 0x0a30-0x0a3f] has been reserved [ 0.358397] system 00:08: [io 0x0250-0x025f] has been reserved [ 0.358398] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.358435] pnp 00:09: [io 0x0010-0x001f] [ 0.358436] pnp 00:09: [io 0x0022-0x003f] [ 0.358437] pnp 00:09: [io 0x0044-0x005f] [ 0.358438] pnp 00:09: [io 0x0062-0x0063] [ 0.358439] pnp 00:09: [io 0x0065-0x006f] [ 0.358440] pnp 00:09: [io 0x0072-0x007f] [ 0.358441] pnp 00:09: [io 0x0080] [ 0.358442] pnp 00:09: [io 0x0084-0x0086] [ 0.358443] pnp 00:09: [io 0x0088] [ 0.358444] pnp 00:09: [io 0x008c-0x008e] [ 0.358445] pnp 00:09: [io 0x0090-0x009f] [ 0.358446] pnp 00:09: [io 0x00a2-0x00bf] [ 0.358446] pnp 00:09: [io 0x00e0-0x00ef] [ 0.358447] pnp 00:09: [io 0x04d0-0x04d1] [ 0.358468] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.358469] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.358475] pnp 00:0a: [io 0x00f0-0x00ff] [ 0.358481] pnp 00:0a: [irq 13] [ 0.358493] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.358669] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff] [ 0.358670] pnp 00:0b: [mem 0xfed10000-0xfed17fff] [ 0.358671] pnp 00:0b: [mem 0xfed18000-0xfed18fff] [ 0.358672] pnp 00:0b: [mem 0xfed19000-0xfed19fff] [ 0.358673] pnp 00:0b: [mem 0xf8000000-0xfbffffff] [ 0.358674] pnp 00:0b: [mem 0xfed20000-0xfed3ffff] [ 0.358675] pnp 00:0b: [mem 0xfed90000-0xfed93fff] [ 0.358676] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] [ 0.358677] pnp 00:0b: [mem 0xff000000-0xffffffff] [ 0.358678] pnp 00:0b: [mem 0xfee00000-0xfeefffff] [ 0.358679] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff] [ 0.358711] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.358712] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.358713] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.358715] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.358716] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.358717] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.358718] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.358720] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.358721] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.358722] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.358723] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.358725] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.358834] pnp 00:0c: [mem 0x20000000-0x201fffff] [ 0.358836] pnp 00:0c: [mem 0x40004000-0x40004fff] [ 0.358868] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 0.358869] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved [ 0.358870] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.358885] pnp: PnP ACPI: found 13 devices [ 0.358886] ACPI: ACPI bus type pnp unregistered [ 0.394198] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.394202] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.394217] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.394218] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.394222] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.394238] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.394241] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.394245] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.394274] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.394275] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.394276] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.394277] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.394279] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.394280] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.394281] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.394282] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.394283] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.394284] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 0.394285] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.394286] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.394288] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.394289] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.394304] NET: Registered protocol family 2 [ 0.394387] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.394508] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.394561] TCP: Hash tables configured (established 131072 bind 65536) [ 0.394567] TCP: reno registered [ 0.394568] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.394571] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.394598] NET: Registered protocol family 1 [ 0.394605] pci 0000:00:02.0: Boot video device [ 0.427648] PCI: CLS 64 bytes, default 64 [ 0.427689] Unpacking initramfs... [ 0.727460] Freeing initrd memory: 25812k freed [ 0.729936] audit: initializing netlink socket (disabled) [ 0.729944] type=2000 audit(1350213855.626:1): initialized [ 0.740694] bounce pool size: 64 pages [ 0.740697] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.741513] VFS: Disk quotas dquot_6.5.2 [ 0.741540] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.741672] msgmni has been set to 1698 [ 0.741799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.741815] io scheduler noop registered [ 0.741816] io scheduler deadline registered [ 0.741819] io scheduler cfq registered (default) [ 0.741881] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.742067] intel_idle: MWAIT substates: 0x1120 [ 0.742068] intel_idle: v0.4 model 0x3A [ 0.742069] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.744805] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.745175] Non-volatile memory driver v1.3 [ 0.745177] Linux agpgart interface v0.103 [ 0.745250] ahci 0000:00:1f.2: version 3.0 [ 0.745285] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.745308] ahci: SSS flag set, parallel bus scan disabled [ 0.756703] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode [ 0.756707] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.756716] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.770221] scsi0 : ahci [ 0.770257] scsi1 : ahci [ 0.770289] scsi2 : ahci [ 0.770318] scsi3 : ahci [ 0.770347] scsi4 : ahci [ 0.770376] scsi5 : ahci [ 0.770398] ata1: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32100 irq 41 [ 0.770400] ata2: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32180 irq 41 [ 0.770401] ata3: DUMMY [ 0.770401] ata4: DUMMY [ 0.770402] ata5: DUMMY [ 0.770404] ata6: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32380 irq 41 [ 0.770442] libphy: Fixed MDIO Bus: probed [ 0.770443] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.770465] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.770468] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.770471] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.774350] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.774357] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 0.774367] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d34000 [ 0.783275] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.783295] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.783297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.783299] usb usb1: Product: EHCI Host Controller [ 0.783302] usb usb1: Manufacturer: Linux 3.6.2 ehci_hcd [ 0.783304] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.783382] hub 1-0:1.0: USB hub found [ 0.783384] hub 1-0:1.0: 2 ports detected [ 0.783430] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.783432] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.783435] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.787313] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.787319] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 0.787329] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d33000 [ 0.796572] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.796585] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.796587] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.796589] usb usb2: Product: EHCI Host Controller [ 0.796591] usb usb2: Manufacturer: Linux 3.6.2 ehci_hcd [ 0.796593] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.796660] hub 2-0:1.0: USB hub found [ 0.796662] hub 2-0:1.0: 2 ports detected [ 0.796696] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.796703] uhci_hcd: USB Universal Host Controller Interface driver [ 0.796710] Initializing USB Mass Storage driver... [ 0.796719] usbcore: registered new interface driver usb-storage [ 0.796719] USB Mass Storage support registered. [ 0.796723] usbcore: registered new interface driver ums-alauda [ 0.796725] usbcore: registered new interface driver ums-cypress [ 0.796729] usbcore: registered new interface driver ums-datafab [ 0.796732] usbcore: registered new interface driver ums-freecom [ 0.796735] usbcore: registered new interface driver ums-isd200 [ 0.796738] usbcore: registered new interface driver ums-jumpshot [ 0.796741] usbcore: registered new interface driver ums-karma [ 0.796744] usbcore: registered new interface driver ums-onetouch [ 0.796747] usbcore: registered new interface driver ums-sddr09 [ 0.796750] usbcore: registered new interface driver ums-sddr55 [ 0.796753] usbcore: registered new interface driver ums-usbat [ 0.796775] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.799441] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.799447] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.799493] mousedev: PS/2 mouse device common for all mice [ 0.799556] rtc_cmos 00:06: RTC can wake from S4 [ 0.799663] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.799691] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.799728] cpuidle: using governor ladder [ 0.799813] usbcore: registered new interface driver usbhid [ 0.799813] usbhid: USB HID core driver [ 0.799903] ashmem: initialized [ 0.799983] TCP: cubic registered [ 0.800032] NET: Registered protocol family 10 [ 0.800125] lib80211: common routines for IEEE802.11 drivers [ 0.800126] lib80211_crypt: registered algorithm 'NULL' [ 0.800130] Key type dns_resolver registered [ 0.800132] Key type ceph registered [ 0.800136] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 0.800267] Using IPI No-Shortcut mode [ 0.800436] registered taskstats version 1 [ 0.800736] Magic number: 0:616:428 [ 0.800826] rtc_cmos 00:06: setting system clock to 2012-10-14 11:24:15 UTC (1350213855) [ 1.089097] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.089106] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.098340] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.098345] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.098349] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.101108] ata1.00: ATAPI: HL-DT-ST BDDVDRW UH12LS29, 1.00, max UDMA/133 [ 1.106145] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.106150] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.106154] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.108901] ata1.00: configured for UDMA/133 [ 1.127726] scsi 0:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12LS29 1.00 PQ: 0 ANSI: 5 [ 1.212406] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.212410] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.212686] hub 1-1:1.0: USB hub found [ 1.212815] hub 1-1:1.0: 6 ports detected [ 1.318419] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.441753] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.441758] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.442026] hub 2-1:1.0: USB hub found [ 1.442157] hub 2-1:1.0: 8 ports detected [ 1.444735] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.446117] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.446121] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.446124] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.456525] ata2.00: ATA-9: INTEL SSDSC2CW060A3, 400i, max UDMA/133 [ 1.456529] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.466020] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.466025] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.466028] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.476479] ata2.00: configured for UDMA/133 [ 1.476628] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CW06 400i PQ: 0 ANSI: 5 [ 1.127950] ACPI: Invalid Power Resource to register! [ 1.476818] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.476975] sd 1:0:0:0: [sda] Write Protect is off [ 1.476977] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.477062] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.477719] sda: sda1 sda2 sda3 sda4 [ 1.478193] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.507964] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd [ 1.594494] usb 1-1.2: New USB device found, idVendor=0846, idProduct=9011 [ 1.594499] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.594502] usb 1-1.2: Product: Remote Download Wireless Adapter [ 1.594504] usb 1-1.2: Manufacturer: Broadcom [ 1.594506] usb 1-1.2: SerialNumber: 0 [ 1.707390] usb 2-1.6: new full-speed USB device number 3 using ehci_hcd [ 1.727258] tsc: Refined TSC clocksource calibration: 3392.303 MHz [ 1.727264] Switching to clocksource tsc [ 1.793739] ata6: SATA link down (SStatus 0 SControl 300) [ 1.793881] Freeing unused kernel memory: 452k freed [ 1.793882] usb 2-1.6: New USB device found, idVendor=19ff, idProduct=0231 [ 1.793884] usb 2-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.793885] usb 2-1.6: Product: Dynex wireless combo [ 1.816437] emc: device handler registered [ 1.817333] rdac: device handler registered [ 1.818325] alua: device handler registered [ 1.819203] hp_sw: device handler registered [ 1.821736] udevd[119]: starting version 182 [ 1.826898] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.826925] ACPI: Power Button [PWRB] [ 1.826961] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.826978] ACPI: Power Button [PWRF] [ 1.831771] ACPI: Fan [FAN0] (off) [ 1.832992] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.832999] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.833003] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.833089] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.833095] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d20000 [ 1.833139] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 1.833182] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.833183] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.833184] usb usb3: Product: xHCI Host Controller [ 1.833185] usb usb3: Manufacturer: Linux 3.6.2 xhci_hcd [ 1.833186] usb usb3: SerialNumber: 0000:00:14.0 [ 1.834641] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input2 [ 1.834658] [drm] Initialized drm 1.1.0 20060810 [ 1.834729] hid-generic 0003:19FF:0231.0001: input,hidraw0: USB HID v1.11 Keyboard [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input0 [ 1.834847] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input3 [ 1.834921] hid-generic 0003:19FF:0231.0002: input,hidraw1: USB HID v1.11 Mouse [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input1 [ 1.840233] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module. [ 1.840308] DRM: Fill_in_dev failed. [ 1.853685] xHCI xhci_add_endpoint called for root hub [ 1.853686] xHCI xhci_check_bandwidth called for root hub [ 1.853709] hub 3-0:1.0: USB hub found [ 1.853715] hub 3-0:1.0: 4 ports detected [ 1.853749] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.853750] ACPI: Thermal Zone [TZ00] (28 C) [ 1.853756] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.853758] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.853780] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.853781] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.853782] usb usb4: Product: xHCI Host Controller [ 1.853783] usb usb4: Manufacturer: Linux 3.6.2 xhci_hcd [ 1.853784] usb usb4: SerialNumber: 0000:00:14.0 [ 1.853866] xHCI xhci_add_endpoint called for root hub [ 1.853868] xHCI xhci_check_bandwidth called for root hub [ 1.853888] hub 4-0:1.0: USB hub found [ 1.853895] hub 4-0:1.0: 4 ports detected [ 1.853908] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.853909] ACPI: Thermal Zone [TZ01] (30 C) [ 1.853959] ACPI: Fan [FAN1] (off) [ 1.853984] ACPI: Fan [FAN2] (off) [ 1.854017] ACPI: Fan [FAN3] (off) [ 1.854039] ACPI: Fan [FAN4] (off) [ 1.933054] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 1.947399] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr [ 2.225001] systemd-readahead-replay[264]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day. [ 2.659007] udevd[296]: starting version 182 [ 2.732295] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12 [ 2.767993] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12 [ 2.768301] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12 [ 2.768566] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12 [ 2.768832] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 2.843323] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 2.860282] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr [ 1.476849] ACPI: Invalid Power Resource to register! [ 3.090650] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251) [ 3.090655] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.090657] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251) [ 3.090659] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.090660] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.091692] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.092117] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.092397] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 3.092398] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 3.092420] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.092462] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.092487] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 3.102161] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 3.102181] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.105366] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 3.110790] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.110793] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.110864] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.111345] kvm: disabled by bios [ 3.285381] Adding 4193276k swap on /dev/sda3. Priority:-1 extents:1 across:4193276k SS [ 3.350506] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) e8:40:f2:05:f1:85 [ 3.350508] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.350552] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 3.350613] ACPI Warning: 0x0000f040-0x0000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251) [ 3.350617] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.382470] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 4.409682] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4.512690] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 4.512778] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.750823] RPC: Registered named UNIX socket transport module. [ 4.750825] RPC: Registered udp transport module. [ 4.750826] RPC: Registered tcp transport module. [ 4.750826] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.753189] FS-Cache: Loaded [ 4.755918] FS-Cache: Netfs 'nfs' registered for caching [ 5.358715] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr,commit=0 [ 5.361235] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0 [ 6.008688] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 6.008692] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 6.008725] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [Intel-gfx] Intel graphics drm issue? 2012-10-14 15:41 ` Mark Hounschell @ 2012-10-14 15:53 ` Daniel Vetter 2012-10-14 15:55 ` Bruno Prémont 0 siblings, 1 reply; 25+ messages in thread From: Daniel Vetter @ 2012-10-14 15:53 UTC (permalink / raw) To: dmarkh; +Cc: markh, Bruno Prémont, Intel Graphics Development, linux-kernel On Sun, Oct 14, 2012 at 5:41 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: > There is something amiss. Here is my i915_pci_probe routine. I Added a > couple more printks. NONE of these show up in dmesg. Not even the "Entered" > printk. ???? That's rather strange indeed. Is there another driver bound by accident to the intel graphics? You can check that with lspci -k -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [Intel-gfx] Intel graphics drm issue? 2012-10-14 15:53 ` Daniel Vetter @ 2012-10-14 15:55 ` Bruno Prémont 2012-10-14 16:09 ` Mark Hounschell 0 siblings, 1 reply; 25+ messages in thread From: Bruno Prémont @ 2012-10-14 15:55 UTC (permalink / raw) To: Daniel Vetter; +Cc: dmarkh, markh, Intel Graphics Development, linux-kernel On Sun, 14 October 2012 Daniel Vetter <daniel@ffwll.ch> wrote: > On Sun, Oct 14, 2012 at 5:41 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: > > There is something amiss. Here is my i915_pci_probe routine. I Added a > > couple more printks. NONE of these show up in dmesg. Not even the "Entered" > > printk. ???? > > That's rather strange indeed. Is there another driver bound by > accident to the intel graphics? You can check that with lspci -k > -Daniel A few mails ago in a kernel cmd I saw a nomodeset, could it be that it's still around? Bruno ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [Intel-gfx] Intel graphics drm issue? 2012-10-14 15:55 ` Bruno Prémont @ 2012-10-14 16:09 ` Mark Hounschell 2012-10-14 16:13 ` Mark Hounschell 0 siblings, 1 reply; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 16:09 UTC (permalink / raw) To: Bruno Prémont Cc: Daniel Vetter, markh, Intel Graphics Development, linux-kernel On 10/14/2012 11:55 AM, Bruno Prémont wrote: > On Sun, 14 October 2012 Daniel Vetter <daniel@ffwll.ch> wrote: >> On Sun, Oct 14, 2012 at 5:41 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: >>> There is something amiss. Here is my i915_pci_probe routine. I Added a >>> couple more printks. NONE of these show up in dmesg. Not even the "Entered" >>> printk. ???? >> >> That's rather strange indeed. Is there another driver bound by >> accident to the intel graphics? You can check that with lspci -k >> -Daniel > > A few mails ago in a kernel cmd I saw a nomodeset, could it be that > it's still around? Yes, that is still around. I'll get rid of it and try again. Mark ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [Intel-gfx] Intel graphics drm issue? 2012-10-14 16:09 ` Mark Hounschell @ 2012-10-14 16:13 ` Mark Hounschell 0 siblings, 0 replies; 25+ messages in thread From: Mark Hounschell @ 2012-10-14 16:13 UTC (permalink / raw) To: dmarkh Cc: Bruno Prémont, Daniel Vetter, markh, Intel Graphics Development, linux-kernel [-- Attachment #1: Type: text/plain, Size: 1049 bytes --] On 10/14/2012 12:09 PM, Mark Hounschell wrote: > On 10/14/2012 11:55 AM, Bruno Prémont wrote: >> On Sun, 14 October 2012 Daniel Vetter <daniel@ffwll.ch> wrote: >>> On Sun, Oct 14, 2012 at 5:41 PM, Mark Hounschell <dmarkh@cfl.rr.com> wrote: >>>> There is something amiss. Here is my i915_pci_probe routine. I Added a >>>> couple more printks. NONE of these show up in dmesg. Not even the >>>> "Entered" >>>> printk. ???? >>> >>> That's rather strange indeed. Is there another driver bound by >>> accident to the intel graphics? You can check that with lspci -k >>> -Daniel >> >> A few mails ago in a kernel cmd I saw a nomodeset, could it be that >> it's still around? > > Yes, that is still around. I'll get rid of it and try again. > > Mark > > That was it. Sorry. Attached is the dmesg now. This is what I see though [ 1.875354] [drm] Initialized drm 1.1.0 20060810 [ 1.891216] i915_pci_probe: Entered [ 1.891218] dropping agp requirement [ 1.891219] force-disabling agp on gen 7, is_ivybridge 1 Mark [-- Attachment #2: dmesg-dvi2hdmi-3.6.2-2 --] [-- Type: text/plain, Size: 205642 bytes --] [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.2 (root@geexbox) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Sun Oct 14 02:03:31 EDT 2012 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9e5efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9e5f000-0x00000000da25afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da25b000-0x00000000da266fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da267000-0x00000000da2f2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da2f3000-0x00000000da2f8fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da2f9000-0x00000000da37afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da37b000-0x00000000da40cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da40d000-0x00000000da6a2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da6a3000-0x00000000da6a3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da6a4000-0x00000000da6e6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da6e7000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: /DH77DF, BIOS KCH7710H.86A.0095.2012.0608.1754 06/08/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 5 base 21F800000 mask FFF800000 uncachable [ 0.000000] 6 base 21F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [c00fd770] [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x00bfa000-0x00bfffff] [ 0.000000] RAMDISK: [mem 0x1e6bb000-0x1ffeffff] [ 0.000000] ACPI: RSDP 000f0490 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT da25b070 00064 (v01 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: FACP da264db8 000F4 (v04 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: DSDT da25b168 09C49 (v02 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: FACS da40bf80 00040 [ 0.000000] ACPI: APIC da264eb0 00072 (v03 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: FPDT da264f28 00044 (v01 INTEL DH77DF 0000005F AMI 00010013) [ 0.000000] ACPI: MCFG da264f70 0003C (v01 INTEL DH77DF 0000005F MSFT 00000097) [ 0.000000] ACPI: HPET da264fb0 00038 (v01 INTEL DH77DF 0000005F AMI. 00000005) [ 0.000000] ACPI: SSDT da264fe8 0036D (v01 INTEL DH77DF 0000005F INTL 20091112) [ 0.000000] ACPI: SSDT da265358 009AA (v01 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: SSDT da265d08 00A92 (v01 INTEL DH77DF 0000005F INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2616MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0xdaffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xd9e5efff] [ 0.000000] node 0: [mem 0xda2f9000-0xda37afff] [ 0.000000] node 0: [mem 0xda6a3000-0xda6a3fff] [ 0.000000] node 0: [mem 0xda6e7000-0xdaffffff] [ 0.000000] On node 0 totalpages: 894343 [ 0.000000] free_area_init_node: node 0, pgdat c0894340, node_mem_map f5c9d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 220974 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5233 pages used for memmap [ 0.000000] HighMem zone: 662411 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5c5b000 s26944 r0 d22208 u49152 [ 0.000000] pcpu-alloc: s26944 r0 d22208 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 887334 [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-INTEL_SSDSC2CW060A3_CVCV205106EB060AGN-part4 video=1024x768 noresume splash=silent quiet apm=off drm.debug=0xe irqpoll [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Initializing HighMem for node 0 (000377fe:000db000) [ 0.000000] Memory: 3514632k/3588096k available (4577k kernel code, 62740k reserved, 2220k data, 452k init, 2670576k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc08a4000 - 0xc0915000 ( 452 kB) [ 0.000000] .data : 0xc0678452 - 0xc08a3800 (2220 kB) [ 0.000000] .text : 0xc0200000 - 0xc0678452 (4577 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.003333] tsc: Detected 3392.407 MHz processor [ 0.000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.51 BogoMIPS (lpj=11308023) [ 0.000002] pid_max: default: 32768 minimum: 301 [ 0.000015] Security Framework initialized [ 0.000024] AppArmor: AppArmor initialized [ 0.000029] Mount-cache hash table entries: 512 [ 0.000136] Initializing cgroup subsys net_cls [ 0.000137] Initializing cgroup subsys blkio [ 0.000154] CPU: Physical Processor ID: 0 [ 0.000154] CPU: Processor Core ID: 0 [ 0.000157] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000157] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000694] mce: CPU supports 9 MCE banks [ 0.000704] CPU0: Thermal monitoring enabled (TM1) [ 0.000708] process: using mwait in idle threads [ 0.000712] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.000712] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000712] tlb_flushall_shift is 0x1 [ 0.001277] ACPI: Core revision 20120711 [ 0.007332] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.007753] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040662] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz stepping 09 [ 0.146600] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver. [ 0.146604] ... version: 3 [ 0.146605] ... bit width: 48 [ 0.146606] ... generic registers: 8 [ 0.146606] ... value mask: 0000ffffffffffff [ 0.146607] ... max period: 000000007fffffff [ 0.146608] ... fixed-purpose events: 3 [ 0.146608] ... event mask: 00000007000000ff [ 0.193139] CPU 1 irqstacks, hard=f54b0000 soft=f54b2000 [ 0.203368] Initializing CPU#1 [ 0.193141] smpboot: Booting Node 0, Processors #1 [ 0.219729] CPU 2 irqstacks, hard=f54c6000 soft=f54c8000 [ 0.229999] Initializing CPU#2 [ 0.219732] #2 [ 0.246318] CPU 3 irqstacks, hard=f54e0000 soft=f54e2000 [ 0.246321] #3 OK [ 0.256587] Initializing CPU#3 [ 0.260024] Brought up 4 CPUs [ 0.260026] smpboot: Total of 4 processors activated (27150.05 BogoMIPS) [ 0.262498] devtmpfs: initialized [ 0.262651] PM: Registering ACPI NVS region [mem 0xda37b000-0xda40cfff] (598016 bytes) [ 0.262656] PM: Registering ACPI NVS region [mem 0xda6a4000-0xda6e6fff] (274432 bytes) [ 0.262709] dummy: [ 0.262738] RTC time: 12:09:14, date: 10/14/12 [ 0.262762] NET: Registered protocol family 16 [ 0.312898] ACPI: bus type pci registered [ 0.312943] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.312944] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.312945] PCI: Using MMCONFIG for extended config space [ 0.312946] PCI: Using configuration type 1 for base access [ 0.313393] bio: create slab <bio-0> at 0 [ 0.313429] ACPI: Added _OSI(Module Device) [ 0.313430] ACPI: Added _OSI(Processor Device) [ 0.313431] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.313432] ACPI: Added _OSI(Processor Aggregator Device) [ 0.314760] ACPI: EC: Look up EC in DSDT [ 0.316276] ACPI: Executed 1 blocks of module-level executable AML code [ 0.336784] ACPI: SSDT da293018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.337119] ACPI: Dynamic OEM Table Load: [ 0.337121] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.346245] ACPI: SSDT da294a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.346612] ACPI: Dynamic OEM Table Load: [ 0.346614] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.363053] ACPI: SSDT da299c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.363390] ACPI: Dynamic OEM Table Load: [ 0.363392] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.380196] ACPI: Interpreter enabled [ 0.380201] ACPI: (supports S0 S3 S4 S5) [ 0.380213] ACPI: Using IOAPIC for interrupt routing [ 0.384188] ACPI: Power Resource [FN00] (off) [ 0.384238] ACPI: Power Resource [FN01] (off) [ 0.384285] ACPI: Power Resource [FN02] (off) [ 0.384333] ACPI: Power Resource [FN03] (off) [ 0.384380] ACPI: Power Resource [FN04] (off) [ 0.384738] ACPI: No dock devices found. [ 0.384741] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.384972] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.385303] PCI host bridge to bus 0000:00 [ 0.385305] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff] [ 0.385306] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.385308] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.385309] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.385310] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.385311] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.385312] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.385313] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.385315] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.385316] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.385317] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.385318] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.385324] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.385354] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.385376] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.385393] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000 [ 0.385400] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.385405] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.385408] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 0.385452] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.385471] pci 0000:00:14.0: reg 10: [mem 0xf7d20000-0xf7d2ffff 64bit] [ 0.385536] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.385557] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.385578] pci 0000:00:16.0: reg 10: [mem 0xf7d37000-0xf7d3700f 64bit] [ 0.385649] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.385676] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.385692] pci 0000:00:19.0: reg 10: [mem 0xf7d00000-0xf7d1ffff] [ 0.385700] pci 0000:00:19.0: reg 14: [mem 0xf7d35000-0xf7d35fff] [ 0.385708] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f] [ 0.385765] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.385787] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.385806] pci 0000:00:1a.0: reg 10: [mem 0xf7d34000-0xf7d343ff] [ 0.385889] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.385914] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.386043] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.386080] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 [ 0.386152] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.386177] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.386196] pci 0000:00:1d.0: reg 10: [mem 0xf7d33000-0xf7d333ff] [ 0.386279] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.386303] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100 [ 0.386418] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.386434] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7] [ 0.386441] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3] [ 0.386448] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7] [ 0.386456] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3] [ 0.386463] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 0.386470] pci 0000:00:1f.2: reg 24: [mem 0xf7d32000-0xf7d327ff] [ 0.386510] pci 0000:00:1f.2: PME# supported from D3hot [ 0.386525] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.386539] pci 0000:00:1f.3: reg 10: [mem 0xf7d31000-0xf7d310ff 64bit] [ 0.386557] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 0.386595] pci_bus 0000:01: busn_res: [bus 01-02] is inserted under [bus 00-3e] [ 0.386612] pci 0000:01:00.0: [10b5:8112] type 01 class 0x060400 [ 0.386718] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.386725] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.386727] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.386773] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 01-02] [ 0.386793] pci 0000:02:04.0: [13f6:8788] type 00 class 0x040100 [ 0.386816] pci 0000:02:04.0: reg 10: [io 0xe000-0xe0ff] [ 0.386927] pci 0000:02:04.0: supports D1 D2 [ 0.386978] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.386982] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.387067] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e] [ 0.387069] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.387122] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-3e] [ 0.387125] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.387129] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.387132] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.387151] pci_bus 0000:00: on NUMA node 0 [ 0.387153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.387240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.387268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT] [ 0.387290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.387381] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.387520] pci0000:00: ACPI _OSC control (0x18) granted [ 0.390373] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.390406] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.390444] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.390480] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.390511] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.390548] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.390585] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.390622] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.390661] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.390664] vgaarb: loaded [ 0.390665] vgaarb: bridge control possible 0000:00:02.0 [ 0.390723] SCSI subsystem initialized [ 0.390724] ACPI: bus type scsi registered [ 0.390741] libata version 3.00 loaded. [ 0.390751] ACPI: bus type usb registered [ 0.390760] usbcore: registered new interface driver usbfs [ 0.390764] usbcore: registered new interface driver hub [ 0.390776] usbcore: registered new device driver usb [ 0.390801] PCI: Using ACPI for IRQ routing [ 0.392169] PCI: pci_cache_line_size set to 64 bytes [ 0.392218] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.392219] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.392220] e820: reserve RAM buffer [mem 0xd9e5f000-0xdbffffff] [ 0.392222] e820: reserve RAM buffer [mem 0xda37b000-0xdbffffff] [ 0.392223] e820: reserve RAM buffer [mem 0xda6a4000-0xdbffffff] [ 0.392224] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.392275] NetLabel: Initializing [ 0.392276] NetLabel: domain hash size = 128 [ 0.392277] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.392282] NetLabel: unlabeled traffic allowed by default [ 0.392328] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.392331] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.395338] Switching to clocksource hpet [ 0.395378] AppArmor: AppArmor Filesystem Enabled [ 0.395386] pnp: PnP ACPI init [ 0.395391] ACPI: bus type pnp registered [ 0.395571] pnp 00:00: [bus 00-3e] [ 0.395573] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.395574] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.395575] pnp 00:00: [io 0x0d00-0xffff window] [ 0.395576] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.395578] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.395579] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.395580] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.395581] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.395582] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.395584] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.395585] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.395586] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.395587] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.395588] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.395589] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.395590] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.395591] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.395592] pnp 00:00: [mem 0xdfa00000-0xfeafffff window] [ 0.395593] pnp 00:00: [mem 0x00010000-0x0001ffff window] [ 0.395624] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.395640] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.395657] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.395659] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.395666] pnp 00:02: [io 0x0000-0x001f] [ 0.395667] pnp 00:02: [io 0x0081-0x0091] [ 0.395668] pnp 00:02: [io 0x0093-0x009f] [ 0.395669] pnp 00:02: [io 0x00c0-0x00df] [ 0.395670] pnp 00:02: [dma 4] [ 0.395682] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.395686] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.395696] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.395752] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.395763] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.395771] pnp 00:05: [io 0x002e-0x002f] [ 0.395772] pnp 00:05: [io 0x004e-0x004f] [ 0.395773] pnp 00:05: [io 0x0061] [ 0.395774] pnp 00:05: [io 0x0063] [ 0.395775] pnp 00:05: [io 0x0065] [ 0.395776] pnp 00:05: [io 0x0067] [ 0.395777] pnp 00:05: [io 0x0070] [ 0.395777] pnp 00:05: [io 0x0080] [ 0.395778] pnp 00:05: [io 0x0092] [ 0.395779] pnp 00:05: [io 0x00b2-0x00b3] [ 0.395780] pnp 00:05: [io 0x0680-0x069f] [ 0.395781] pnp 00:05: [io 0x1000-0x100f] [ 0.395782] pnp 00:05: [io 0xffff] [ 0.395783] pnp 00:05: [io 0xffff] [ 0.395784] pnp 00:05: [io 0x0400-0x0453] [ 0.395786] pnp 00:05: [io 0x0458-0x047f] [ 0.395787] pnp 00:05: [io 0x0500-0x057f] [ 0.395788] pnp 00:05: [io 0x164e-0x164f] [ 0.395807] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.395809] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.395810] system 00:05: [io 0xffff] has been reserved [ 0.395811] system 00:05: [io 0xffff] has been reserved [ 0.395812] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.395814] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.395815] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.395816] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.395817] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.395822] pnp 00:06: [io 0x0070-0x0077] [ 0.395831] pnp 00:06: [irq 8] [ 0.395842] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.395858] pnp 00:07: [io 0x0454-0x0457] [ 0.395876] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.395878] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.395932] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.395934] pnp 00:08: [io 0x0a30-0x0a3f] [ 0.395935] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.395936] pnp 00:08: [io 0x0250-0x025f] [ 0.395953] system 00:08: [io 0x0a30-0x0a3f] has been reserved [ 0.395954] system 00:08: [io 0x0250-0x025f] has been reserved [ 0.395955] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.395992] pnp 00:09: [io 0x0010-0x001f] [ 0.395993] pnp 00:09: [io 0x0022-0x003f] [ 0.395994] pnp 00:09: [io 0x0044-0x005f] [ 0.395995] pnp 00:09: [io 0x0062-0x0063] [ 0.395996] pnp 00:09: [io 0x0065-0x006f] [ 0.395997] pnp 00:09: [io 0x0072-0x007f] [ 0.395998] pnp 00:09: [io 0x0080] [ 0.395998] pnp 00:09: [io 0x0084-0x0086] [ 0.395999] pnp 00:09: [io 0x0088] [ 0.396000] pnp 00:09: [io 0x008c-0x008e] [ 0.396001] pnp 00:09: [io 0x0090-0x009f] [ 0.396002] pnp 00:09: [io 0x00a2-0x00bf] [ 0.396003] pnp 00:09: [io 0x00e0-0x00ef] [ 0.396004] pnp 00:09: [io 0x04d0-0x04d1] [ 0.396025] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.396026] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.396032] pnp 00:0a: [io 0x00f0-0x00ff] [ 0.396039] pnp 00:0a: [irq 13] [ 0.396050] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.396227] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff] [ 0.396228] pnp 00:0b: [mem 0xfed10000-0xfed17fff] [ 0.396229] pnp 00:0b: [mem 0xfed18000-0xfed18fff] [ 0.396230] pnp 00:0b: [mem 0xfed19000-0xfed19fff] [ 0.396232] pnp 00:0b: [mem 0xf8000000-0xfbffffff] [ 0.396233] pnp 00:0b: [mem 0xfed20000-0xfed3ffff] [ 0.396234] pnp 00:0b: [mem 0xfed90000-0xfed93fff] [ 0.396234] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] [ 0.396236] pnp 00:0b: [mem 0xff000000-0xffffffff] [ 0.396236] pnp 00:0b: [mem 0xfee00000-0xfeefffff] [ 0.396237] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff] [ 0.396269] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.396270] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.396272] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.396283] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.396284] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.396285] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.396286] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.396288] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.396289] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.396290] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.396292] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.396293] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.396403] pnp 00:0c: [mem 0x20000000-0x201fffff] [ 0.396404] pnp 00:0c: [mem 0x40004000-0x40004fff] [ 0.396437] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 0.396438] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved [ 0.396439] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.396454] pnp: PnP ACPI: found 13 devices [ 0.396455] ACPI: ACPI bus type pnp unregistered [ 0.431763] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.431767] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.431782] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.431783] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.431787] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.431807] pci 0000:00:1c.7: PCI bridge to [bus 04] [ 0.431810] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.431815] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.431844] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.431845] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.431846] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.431847] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.431848] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.431849] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.431851] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.431852] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.431853] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.431854] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 0.431855] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.431856] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.431858] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.431859] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.431874] NET: Registered protocol family 2 [ 0.431956] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.432078] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.432132] TCP: Hash tables configured (established 131072 bind 65536) [ 0.432137] TCP: reno registered [ 0.432138] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.432141] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.432169] NET: Registered protocol family 1 [ 0.432175] pci 0000:00:02.0: Boot video device [ 0.465207] PCI: CLS 64 bytes, default 64 [ 0.465249] Unpacking initramfs... [ 0.764950] Freeing initrd memory: 25812k freed [ 0.767400] audit: initializing netlink socket (disabled) [ 0.767408] type=2000 audit(1350216554.663:1): initialized [ 0.778156] bounce pool size: 64 pages [ 0.778159] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.778975] VFS: Disk quotas dquot_6.5.2 [ 0.779001] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.779133] msgmni has been set to 1698 [ 0.779252] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.779267] io scheduler noop registered [ 0.779268] io scheduler deadline registered [ 0.779271] io scheduler cfq registered (default) [ 0.779332] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.779518] intel_idle: MWAIT substates: 0x1120 [ 0.779519] intel_idle: v0.4 model 0x3A [ 0.779520] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.782251] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.782625] Non-volatile memory driver v1.3 [ 0.782626] Linux agpgart interface v0.103 [ 0.782698] ahci 0000:00:1f.2: version 3.0 [ 0.782730] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.782753] ahci: SSS flag set, parallel bus scan disabled [ 0.794262] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode [ 0.794266] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.794274] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.807779] scsi0 : ahci [ 0.807815] scsi1 : ahci [ 0.807844] scsi2 : ahci [ 0.807873] scsi3 : ahci [ 0.807902] scsi4 : ahci [ 0.807931] scsi5 : ahci [ 0.807953] ata1: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32100 irq 41 [ 0.807956] ata2: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32180 irq 41 [ 0.807956] ata3: DUMMY [ 0.807957] ata4: DUMMY [ 0.807958] ata5: DUMMY [ 0.807960] ata6: SATA max UDMA/133 abar m2048@0xf7d32000 port 0xf7d32380 irq 41 [ 0.807998] libphy: Fixed MDIO Bus: probed [ 0.807999] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.808016] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.808018] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.808022] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.811901] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.811908] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 0.811918] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d34000 [ 0.820836] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.820857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.820859] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.820862] usb usb1: Product: EHCI Host Controller [ 0.820864] usb usb1: Manufacturer: Linux 3.6.2 ehci_hcd [ 0.820866] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.820941] hub 1-0:1.0: USB hub found [ 0.820943] hub 1-0:1.0: 2 ports detected [ 0.820988] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.820990] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.820993] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.824864] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.824870] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 0.824879] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d33000 [ 0.834130] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.834143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.834146] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.834148] usb usb2: Product: EHCI Host Controller [ 0.834150] usb usb2: Manufacturer: Linux 3.6.2 ehci_hcd [ 0.834152] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.834219] hub 2-0:1.0: USB hub found [ 0.834220] hub 2-0:1.0: 2 ports detected [ 0.834256] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.834263] uhci_hcd: USB Universal Host Controller Interface driver [ 0.834270] Initializing USB Mass Storage driver... [ 0.834279] usbcore: registered new interface driver usb-storage [ 0.834280] USB Mass Storage support registered. [ 0.834284] usbcore: registered new interface driver ums-alauda [ 0.834287] usbcore: registered new interface driver ums-cypress [ 0.834290] usbcore: registered new interface driver ums-datafab [ 0.834294] usbcore: registered new interface driver ums-freecom [ 0.834297] usbcore: registered new interface driver ums-isd200 [ 0.834300] usbcore: registered new interface driver ums-jumpshot [ 0.834302] usbcore: registered new interface driver ums-karma [ 0.834305] usbcore: registered new interface driver ums-onetouch [ 0.834308] usbcore: registered new interface driver ums-sddr09 [ 0.834311] usbcore: registered new interface driver ums-sddr55 [ 0.834314] usbcore: registered new interface driver ums-usbat [ 0.834336] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.836901] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.836908] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.836962] mousedev: PS/2 mouse device common for all mice [ 0.837018] rtc_cmos 00:06: RTC can wake from S4 [ 0.837121] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.837149] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.837186] cpuidle: using governor ladder [ 0.837272] usbcore: registered new interface driver usbhid [ 0.837273] usbhid: USB HID core driver [ 0.837353] ashmem: initialized [ 0.837451] TCP: cubic registered [ 0.837501] NET: Registered protocol family 10 [ 0.837593] lib80211: common routines for IEEE802.11 drivers [ 0.837594] lib80211_crypt: registered algorithm 'NULL' [ 0.837601] Key type dns_resolver registered [ 0.837604] Key type ceph registered [ 0.837607] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 0.837717] Using IPI No-Shortcut mode [ 0.837825] registered taskstats version 1 [ 0.838137] Magic number: 0:963:177 [ 0.838155] acpi device:0d: hash matches [ 0.838205] rtc_cmos 00:06: setting system clock to 2012-10-14 12:09:15 UTC (1350216555) [ 1.126652] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.126656] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.135882] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.135888] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.135891] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.138650] ata1.00: ATAPI: HL-DT-ST BDDVDRW UH12LS29, 1.00, max UDMA/133 [ 1.143686] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.143691] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.143694] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.146445] ata1.00: configured for UDMA/133 [ 1.165274] scsi 0:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12LS29 1.00 PQ: 0 ANSI: 5 [ 1.249957] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.249961] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.250233] hub 1-1:1.0: USB hub found [ 1.250362] hub 1-1:1.0: 6 ports detected [ 1.355983] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.479299] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.479304] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.479577] hub 2-1:1.0: USB hub found [ 1.479703] hub 2-1:1.0: 8 ports detected [ 1.482293] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.483673] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.483677] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.483680] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.494095] ata2.00: ATA-9: INTEL SSDSC2CW060A3, 400i, max UDMA/133 [ 1.494100] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.503634] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.503639] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.503643] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.514040] ata2.00: configured for UDMA/133 [ 1.514217] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CW06 400i PQ: 0 ANSI: 5 [ 1.165523] ACPI: Invalid Power Resource to register! [ 1.514391] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.514632] sd 1:0:0:0: [sda] Write Protect is off [ 1.514635] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.514703] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.515263] sda: sda1 sda2 sda3 sda4 [ 1.515726] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.545527] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd [ 1.632026] usb 1-1.2: New USB device found, idVendor=0846, idProduct=9011 [ 1.632030] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.632033] usb 1-1.2: Product: Remote Download Wireless Adapter [ 1.632035] usb 1-1.2: Manufacturer: Broadcom [ 1.632037] usb 1-1.2: SerialNumber: 0 [ 1.744949] usb 2-1.6: new full-speed USB device number 3 using ehci_hcd [ 1.764810] tsc: Refined TSC clocksource calibration: 3392.304 MHz [ 1.764815] Switching to clocksource tsc [ 1.831210] usb 2-1.6: New USB device found, idVendor=19ff, idProduct=0231 [ 1.831214] usb 2-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.831217] usb 2-1.6: Product: Dynex wireless combo [ 1.831297] ata6: SATA link down (SStatus 0 SControl 300) [ 1.831426] Freeing unused kernel memory: 452k freed [ 1.853098] emc: device handler registered [ 1.854003] rdac: device handler registered [ 1.854999] alua: device handler registered [ 1.855855] hp_sw: device handler registered [ 1.858373] udevd[113]: starting version 182 [ 1.863357] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.863390] ACPI: Power Button [PWRB] [ 1.863423] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.863458] ACPI: Power Button [PWRF] [ 1.866467] ACPI: Fan [FAN0] (off) [ 1.866812] ACPI: Fan [FAN1] (off) [ 1.866836] ACPI: Fan [FAN2] (off) [ 1.866856] ACPI: Fan [FAN3] (off) [ 1.866876] ACPI: Fan [FAN4] (off) [ 1.867588] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.867591] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.867595] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.867677] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.867682] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d20000 [ 1.867720] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 1.867764] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.867766] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.867767] usb usb3: Product: xHCI Host Controller [ 1.867768] usb usb3: Manufacturer: Linux 3.6.2 xhci_hcd [ 1.867769] usb usb3: SerialNumber: 0000:00:14.0 [ 1.867881] xHCI xhci_add_endpoint called for root hub [ 1.867882] xHCI xhci_check_bandwidth called for root hub [ 1.867902] hub 3-0:1.0: USB hub found [ 1.867910] hub 3-0:1.0: 4 ports detected [ 1.867956] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.867958] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.867976] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.867977] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.867978] usb usb4: Product: xHCI Host Controller [ 1.867979] usb usb4: Manufacturer: Linux 3.6.2 xhci_hcd [ 1.867980] usb usb4: SerialNumber: 0000:00:14.0 [ 1.868119] xHCI xhci_add_endpoint called for root hub [ 1.868120] xHCI xhci_check_bandwidth called for root hub [ 1.868137] hub 4-0:1.0: USB hub found [ 1.868145] hub 4-0:1.0: 4 ports detected [ 1.872960] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input2 [ 1.873302] hid-generic 0003:19FF:0231.0001: input,hidraw0: USB HID v1.11 Keyboard [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input0 [ 1.873427] input: Dynex wireless combo as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input3 [ 1.873555] hid-generic 0003:19FF:0231.0002: input,hidraw1: USB HID v1.11 Mouse [Dynex wireless combo] on usb-0000:00:1d.0-1.6/input1 [ 1.875354] [drm] Initialized drm 1.1.0 20060810 [ 1.891216] i915_pci_probe: Entered [ 1.891218] dropping agp requirement [ 1.891219] force-disabling agp on gen 7, is_ivybridge 1 [ 1.891352] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.891354] ACPI: Thermal Zone [TZ00] (28 C) [ 1.891355] pci 0000:00:00.0: Intel Ivybridge Chipset [ 1.891386] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.891480] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.891481] ACPI: Thermal Zone [TZ01] (30 C) [ 1.891945] pci 0000:00:00.0: detected 65536K stolen memory [ 1.892050] i915 0000:00:02.0: setting latency timer to 64 [ 1.514436] ACPI: Invalid Power Resource to register! [ 1.892254] [drm:intel_detect_pch], Found PatherPoint PCH [ 1.892609] [drm:intel_gt_init], Using MT version of forcewake [ 1.892675] [drm:intel_opregion_setup], graphic opregion physical addr: 0xda407018 [ 1.892679] [drm:intel_opregion_setup], SWSCI supported [ 1.892696] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 1.892701] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.892702] [drm] Driver supports precise vblank timestamp query. [ 1.892703] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 1.892705] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd [ 1.892706] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 [ 1.892707] [drm:parse_general_definitions], crt_ddc_bus_pin: 5 [ 1.892709] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.892711] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.892713] [drm:parse_lfp_panel_data], VBT initial LVDS value 300 [ 1.892714] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 1.892715] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.892717] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.892761] [drm:intel_modeset_init], 3 display pipes available. [ 1.892771] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.893078] [drm:intel_lvds_init], LVDS is not present in VBT [ 1.893103] [drm:intel_crt_init], pch crt adpa set to 0x80f40010 [ 1.893527] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 1.893528] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 1.893566] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 1.896150] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.896151] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.898712] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.898712] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.898761] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 1.901323] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.901324] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.903895] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.903895] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.903920] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 1.906492] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.906493] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.909088] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 1.909089] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.909120] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [ 1.909122] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 1.941183] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 1.941186] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 1.941187] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 1.941188] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 1.941629] [drm:ironlake_crtc_dpms], crtc 2/2 dpms off [ 1.941630] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C [ 1.941631] [drm:i915_get_vblank_timestamp], crtc 2 is disabled [ 1.941632] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C [ 1.942068] [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0 has_pch_edp 0 has_cpu_edp 0 has_ck505 0 [ 1.942073] [drm:ironlake_init_pch_refclk], Disabling SSC entirely [ 1.966061] [drm:init_status_page], render ring hws offset: 0x00000000 [ 1.966410] [drm:init_status_page], bsd ring hws offset: 0x00022000 [ 1.966451] [drm:init_status_page], blitter ring hws offset: 0x00043000 [ 1.966497] [drm:create_default_context], Default HW context loaded [ 1.966498] [drm:i915_gem_context_init], HW context support initialized [ 1.966554] [drm:intel_enable_rc6], RC6 and deep RC6 enabled [ 1.966555] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 2.083959] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector VGA-1 1024x768@60Hz [ 2.083962] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector HDMI-A-1 1024x768@60Hz [ 2.083964] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector DP-1 1024x768@60Hz [ 2.083966] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector HDMI-A-2 1024x768@60Hz [ 2.083967] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector HDMI-A-3 1024x768@60Hz [ 2.083968] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector DP-2 1024x768@60Hz [ 2.083970] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector DP-3 1024x768@60Hz [ 2.083971] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 2.083976] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40010 [ 2.097200] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 2.097204] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.140459] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.140515] Raw EDID: [ 2.140560] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.140612] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.140661] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.140713] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.140764] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.140815] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.140867] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.140919] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.182832] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.182884] Raw EDID: [ 2.182954] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.183025] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.183099] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.183171] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.183245] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.183319] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.183392] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.183466] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.225456] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.225556] Raw EDID: [ 2.225625] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.225699] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.225771] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.225845] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.225917] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.225991] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.226064] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.226138] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.268113] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.268213] Raw EDID: [ 2.268282] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.268356] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.268427] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.268501] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.268575] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.268648] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.268722] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.268794] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.268869] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 2.268870] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.268871] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 2.268873] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 2.312132] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.312231] Raw EDID: [ 2.312297] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.312372] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.312446] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.312520] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.312594] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.312668] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.312741] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.312815] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.354804] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.354903] Raw EDID: [ 2.354973] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.355046] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.355120] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.355194] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.355268] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.355341] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.355414] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.355488] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.397488] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.397587] Raw EDID: [ 2.397655] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.397729] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.397800] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.397874] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.397948] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.398023] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.398096] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.398168] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.440118] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.440218] Raw EDID: [ 2.440286] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.440360] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.440431] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.440506] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.440579] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.440653] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.440726] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.440801] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.440876] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 2.440877] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 2.440878] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 2.443481] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.452123] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.458770] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.462813] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 2.462819] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 2.462823] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 2.469467] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.469473] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 2.469476] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 2.469479] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 2.476114] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 2.476119] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 2.476122] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 2.476125] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 2.478726] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.485359] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.492005] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.496050] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 2.496056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 2.496060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 2.498657] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.505303] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.511950] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 2.515994] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 2.515999] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 2.516002] No connectors reported connected with modes [ 2.516004] [drm:drm_setup_crtcs], [ 2.516007] [drm:drm_enable_connectors], connector 9 enabled? no [ 2.516009] [drm:drm_enable_connectors], connector 12 enabled? no [ 2.516011] [drm:drm_enable_connectors], connector 15 enabled? no [ 2.516013] [drm:drm_enable_connectors], connector 18 enabled? no [ 2.516015] [drm:drm_enable_connectors], connector 20 enabled? no [ 2.516017] [drm:drm_enable_connectors], connector 21 enabled? no [ 2.516018] [drm:drm_enable_connectors], connector 23 enabled? no [ 2.516020] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 2.516031] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.518288] [drm:intelfb_create], allocated 1024x768 fb: 0x00073000, bo f4e12e00 [ 2.518402] fbcon: inteldrmfb (fb0) is primary device [ 2.518774] [drm:drm_crtc_helper_set_config], [ 2.518775] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 2.518797] [drm:drm_crtc_helper_set_config], [ 2.518797] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 2.518817] [drm:drm_crtc_helper_set_config], [ 2.518817] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 2.520404] Console: switching to colour frame buffer device 128x48 [ 2.521971] fb0: inteldrmfb frame buffer device [ 2.521972] drm: registered panic notifier [ 2.546204] acpi device:4b: registered as cooling_device9 [ 2.546302] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.546333] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 2.546413] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.565958] [drm:i915_driver_open], [ 2.565968] [drm:drm_crtc_helper_set_config], [ 2.565969] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 2.565992] [drm:drm_crtc_helper_set_config], [ 2.565993] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 2.566013] [drm:drm_crtc_helper_set_config], [ 2.566014] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 2.566040] [drm:i915_driver_open], [ 2.566044] [drm:drm_crtc_helper_set_config], [ 2.566045] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 2.566065] [drm:drm_crtc_helper_set_config], [ 2.566066] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 2.566085] [drm:drm_crtc_helper_set_config], [ 2.566086] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 2.566110] [drm:i915_driver_open], [ 2.566136] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7] [ 2.566139] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7] [ 2.566144] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 2.566145] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 2.566150] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 2.566151] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.609469] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.609500] Raw EDID: [ 2.609510] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.609531] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.609551] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.609572] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.609592] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.609612] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.609633] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.609653] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.651510] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.651537] Raw EDID: [ 2.651547] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.651567] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.651588] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.651608] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.651628] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.651648] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.651668] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.651689] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.693715] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.693742] Raw EDID: [ 2.693752] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.693772] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.694203] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.694636] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.695051] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.695449] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.695842] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.696220] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.738456] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.738863] Raw EDID: [ 2.739266] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.739700] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.740135] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.740568] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.741001] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.741420] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.741818] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.742213] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.742593] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 2.742594] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.742595] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 2.742598] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 2.742599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 2.742603] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 2.742604] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.785860] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.786264] Raw EDID: [ 2.786672] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.787107] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.787542] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.787979] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.788414] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.788851] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.789267] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.789665] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.831922] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.832329] Raw EDID: [ 2.832739] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.833173] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.833611] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.834048] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.834485] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.834922] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.835341] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.835741] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.877936] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.878347] Raw EDID: [ 2.878756] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.879192] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.879629] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.880067] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.880504] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.880941] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.881360] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.881760] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.924045] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.924455] Raw EDID: [ 2.924861] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.925293] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.925730] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.926167] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.926604] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.927038] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.927452] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.927849] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.928230] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 2.928230] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 2.928231] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 2.928234] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 2.928236] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 2.971514] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 2.971917] Raw EDID: [ 2.972322] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 2.972755] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.973188] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.973622] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.974056] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.974491] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.974907] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2.975300] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.017625] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.018029] Raw EDID: [ 3.018437] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.018872] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.019309] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.019745] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.020181] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.020617] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.021033] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.021428] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.063638] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.064042] Raw EDID: [ 3.064447] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.064878] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.065310] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.065746] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.066180] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.066614] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.067029] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.067429] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.109741] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.110146] Raw EDID: [ 3.110552] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.110985] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.111420] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.111855] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.112290] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.112728] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.113144] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.113544] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.113927] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 3.113928] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 3.113930] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 3.113931] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 3.157208] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.157616] Raw EDID: [ 3.158024] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.158459] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.158895] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.159330] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.159766] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.160202] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.160621] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.161019] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.203270] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.203676] Raw EDID: [ 3.204084] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.204519] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.204956] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.205391] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.205827] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.206262] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.206677] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.207069] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.249336] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.249737] Raw EDID: [ 3.250139] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.250572] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.251006] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.251440] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.251872] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.252305] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.252721] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.253117] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.295398] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 3.295801] Raw EDID: [ 3.296208] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 3.296640] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.297075] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.297510] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.297944] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.298380] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.298796] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.299190] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3.299571] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 3.299572] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 3.299575] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 3.299576] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 3.302182] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.309668] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.316315] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.320364] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.320371] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 3.320379] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 3.320382] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 3.322981] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.329610] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.336257] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.340308] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.340314] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 3.340325] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 3.340328] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 3.346962] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.346967] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 3.346971] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 3.346978] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 3.346989] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 3.353611] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.353617] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 3.353621] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 3.353637] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 3.353639] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 3.360259] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 3.360265] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 3.360268] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 3.360284] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 3.360285] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 3.366905] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 3.366910] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 3.366914] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 3.366932] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 3.366933] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 3.369537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.376143] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.382791] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.386842] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.386848] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 3.386856] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 3.386859] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 3.389475] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.396086] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.402733] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.406786] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.406792] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 3.406803] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 3.406806] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 3.409423] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.416029] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.422677] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.426729] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.426735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 3.426743] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 3.426746] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 3.429366] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.435972] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.442620] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 3.446670] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 3.446676] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 3.446714] [drm:drm_crtc_helper_set_config], [ 3.446715] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 3.446738] [drm:drm_crtc_helper_set_config], [ 3.446739] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 3.446758] [drm:drm_crtc_helper_set_config], [ 3.446759] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 3.987748] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 4.002047] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr [ 4.280032] systemd-readahead-replay[281]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day. [ 4.679364] udevd[313]: starting version 182 [ 4.747528] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12 [ 4.748803] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12 [ 4.749093] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12 [ 4.749266] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12 [ 4.749521] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 4.845766] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr [ 4.882785] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 5.125780] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.126203] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.127169] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 5.127170] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 5.127198] e1000e 0000:00:19.0: setting latency timer to 64 [ 5.127240] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.127289] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 5.136898] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 5.136921] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.139567] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 5.147374] kvm: disabled by bios [ 5.151397] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.151398] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.151496] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 5.165752] kvm: disabled by bios [ 5.306607] Adding 4193276k swap on /dev/sda3. Priority:-1 extents:1 across:4193276k SS [ 5.382370] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) e8:40:f2:05:f1:85 [ 5.382373] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 5.382418] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 5.382491] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251) [ 5.382495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.382497] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251) [ 5.382500] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.382500] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.382525] ACPI Warning: 0x0000f040-0x0000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251) [ 5.382528] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.427121] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 6.306683] [drm:i915_driver_open], [ 6.306704] [drm:drm_crtc_helper_set_config], [ 6.306706] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 6.306730] [drm:drm_crtc_helper_set_config], [ 6.306731] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 6.306750] [drm:drm_crtc_helper_set_config], [ 6.306750] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 6.306787] [drm:i915_driver_open], [ 6.307219] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7] [ 6.307223] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[7] ENCODERS[7] [ 6.307254] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 6.307256] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 6.307261] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 6.307262] [drm:intel_crt_detect], CRT not detected via hotplug [ 6.350644] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.350646] Raw EDID: [ 6.350647] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.350648] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.350648] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.350649] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.350650] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.350650] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.350651] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.350652] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.392587] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.392588] Raw EDID: [ 6.392588] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.392589] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.392590] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.392590] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.392591] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.392592] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.392592] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.392593] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.434353] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.434353] Raw EDID: [ 6.434354] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.434354] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.434355] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.434356] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.434356] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.434357] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.434358] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.434358] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.476073] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.476073] Raw EDID: [ 6.476074] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.476075] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.476075] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.476076] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.476077] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.476077] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.476078] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.476079] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.476081] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 6.476082] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 6.476084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 6.476089] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 6.476091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 6.476093] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 6.476094] [drm:intel_crt_detect], CRT not detected via hotplug [ 6.491392] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 6.519396] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.519397] Raw EDID: [ 6.519398] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.519398] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.519399] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.519400] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.519400] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.519401] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.519402] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.519402] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.561289] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.561289] Raw EDID: [ 6.561290] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.561291] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.561291] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.561292] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.561293] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.561293] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.561294] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.561295] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.594367] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 6.594443] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.603647] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.603647] Raw EDID: [ 6.603648] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.603649] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.603650] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.603650] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.603651] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.603652] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.603652] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.603653] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.645588] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.645589] Raw EDID: [ 6.645590] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.645590] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.645591] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.645592] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.645592] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.645593] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.645594] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.645594] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.645596] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 6.645597] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 6.645599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 6.645637] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 6.645639] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 6.688944] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.688945] Raw EDID: [ 6.688946] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.688947] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.688947] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.688948] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.688949] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.688949] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.688950] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.688951] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.730879] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.730879] Raw EDID: [ 6.730880] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.730881] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.730881] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.730882] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.730883] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.730883] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.730884] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.730885] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.772771] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.772772] Raw EDID: [ 6.772773] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.772774] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.772774] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.772775] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.772776] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.772776] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.772777] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.772778] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.808793] RPC: Registered named UNIX socket transport module. [ 6.808796] RPC: Registered udp transport module. [ 6.808796] RPC: Registered tcp transport module. [ 6.808797] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.810967] FS-Cache: Loaded [ 6.813670] FS-Cache: Netfs 'nfs' registered for caching [ 6.814709] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.814710] Raw EDID: [ 6.814711] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.814711] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.814712] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.814713] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.814713] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.814714] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.814715] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.814715] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.814717] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 6.814719] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 6.814725] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 6.814727] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 6.858081] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.858081] Raw EDID: [ 6.858082] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.858083] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.858084] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.858084] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.858085] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.858086] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.858086] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.858087] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.899941] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.899942] Raw EDID: [ 6.899943] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.899943] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.899944] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.899945] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.899945] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.899946] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.899947] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.899947] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.941826] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.941827] Raw EDID: [ 6.941827] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.941828] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.941829] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.941829] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.941830] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.941831] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.941831] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.941832] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983795] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 6.983796] Raw EDID: [ 6.983797] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 6.983798] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983798] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983799] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983800] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983800] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983801] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983802] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983804] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 6.983805] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 6.983832] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 6.983834] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 6.986442] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 6.992465] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 6.999116] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.003163] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.003168] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 7.003176] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 7.003178] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 7.005781] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.012408] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.019077] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.023121] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.023128] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 7.023173] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 7.023175] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 7.029783] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 7.029789] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 7.029792] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 7.029809] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 7.029810] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 7.036413] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 7.036415] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 7.036418] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 7.036449] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 7.036451] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 7.043048] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 7.043051] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 7.043053] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 7.043057] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 7.043059] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 7.049696] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 7.049699] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 7.049701] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 7.049726] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 7.049728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 7.052337] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.058954] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.065589] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.069656] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.069660] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 7.069667] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 7.069668] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 7.072280] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.078883] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.085550] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.089591] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.089595] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 7.089631] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 7.089633] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 7.092242] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.098849] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.105471] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.109533] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.109536] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 7.109543] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 7.109544] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 7.112143] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.118773] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.125417] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.129478] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.129482] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 7.129526] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 7.129528] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 7.129533] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 7.129534] [drm:intel_crt_detect], CRT not detected via hotplug [ 7.173621] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.173623] Raw EDID: [ 7.173625] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.173625] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.173626] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.173627] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.173627] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.173628] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.173629] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.173629] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.215435] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.215437] Raw EDID: [ 7.215438] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.215438] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.215439] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.215440] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.215440] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.215441] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.215442] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.215442] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.257283] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.257284] Raw EDID: [ 7.257285] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.257285] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.257286] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.257287] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.257287] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.257288] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.257289] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.257289] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.299121] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.299121] Raw EDID: [ 7.299122] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.299123] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.299123] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.299124] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.299125] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.299125] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.299126] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.299127] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.299129] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 7.299131] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 7.299133] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 7.299140] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 7.299142] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 7.299147] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 7.299148] [drm:intel_crt_detect], CRT not detected via hotplug [ 7.342406] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.342407] Raw EDID: [ 7.342407] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.342408] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.342409] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.342409] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.342410] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.342411] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.342411] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.342412] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.384275] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.384276] Raw EDID: [ 7.384276] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.384277] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.384278] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.384278] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.384279] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.384280] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.384280] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.384281] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.426203] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.426204] Raw EDID: [ 7.426205] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.426205] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.426206] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.426207] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.426207] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.426208] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.426209] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.426209] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.468085] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.468086] Raw EDID: [ 7.468086] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.468087] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.468088] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.468088] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.468089] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.468090] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.468090] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.468091] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.468092] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 7.468093] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 7.468094] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 7.468126] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 7.468128] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 7.511433] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.511433] Raw EDID: [ 7.511434] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.511435] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.511435] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.511436] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.511437] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.511437] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.511438] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.511439] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.553339] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.553340] Raw EDID: [ 7.553341] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.553341] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.553342] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.553342] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.553343] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.553344] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.553344] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.553345] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.595233] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.595234] Raw EDID: [ 7.595234] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.595235] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.595236] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.595236] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.595237] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.595238] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.595238] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.595239] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.637116] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.637116] Raw EDID: [ 7.637117] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.637117] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.637118] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.637119] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.637119] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.637120] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.637121] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.637121] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.637123] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 7.637124] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 7.637125] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 7.637126] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 7.680481] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.680481] Raw EDID: [ 7.680482] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.680483] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.680483] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.680484] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.680485] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.680486] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.680486] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.680487] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.722337] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.722338] Raw EDID: [ 7.722338] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.722339] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.722340] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.722340] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.722341] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.722342] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.722342] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.722343] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.764238] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.764239] Raw EDID: [ 7.764239] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.764240] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.764241] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.764241] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.764242] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.764243] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.764243] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.764244] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.806111] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 7.806112] Raw EDID: [ 7.806112] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 7.806113] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.806114] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.806114] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.806115] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.806116] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.806116] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.806117] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.806118] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 7.806119] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 7.806132] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 7.806133] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 7.808734] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.820098] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.830086] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.834137] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.834143] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 7.834151] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 7.834154] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 7.836775] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.843383] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.850030] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.854079] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.854086] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 7.854125] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 7.854127] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 7.860735] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 7.860741] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 7.860745] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 7.860761] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 7.860763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 7.867383] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 7.867389] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 7.867393] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 7.867426] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 7.867428] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 7.874030] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 7.874036] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 7.874040] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 7.874048] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 7.874058] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 7.880680] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 7.880685] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 7.880689] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 7.880723] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 7.880724] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 7.883330] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.889915] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.896567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.900613] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.900619] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 7.900627] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 7.900630] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 7.903230] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.909858] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.916506] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.920556] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.920562] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 7.920601] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 7.920603] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 7.923214] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.929800] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.936448] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.940499] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.940505] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 7.940513] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 7.940516] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 7.943116] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.949744] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.956391] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 7.960459] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 7.960465] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 7.981951] [drm:drm_mode_setcrtc], [CRTC:3] [ 7.981954] [drm:drm_crtc_helper_set_config], [ 7.981955] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 7.981980] [drm:drm_mode_setcrtc], [CRTC:5] [ 7.981981] [drm:drm_crtc_helper_set_config], [ 7.981982] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB] [ 7.982003] [drm:drm_mode_setcrtc], [CRTC:7] [ 7.982004] [drm:drm_crtc_helper_set_config], [ 7.982005] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB] [ 8.093811] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 8.093815] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 8.093848] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.295421] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 8.295425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 8.295431] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 8.295432] [drm:intel_crt_detect], CRT not detected via hotplug [ 8.338769] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.338770] Raw EDID: [ 8.338772] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.338772] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.338773] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.338774] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.338774] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.338775] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.338776] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.338776] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.380685] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.380685] Raw EDID: [ 8.380686] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.380687] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.380687] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.380688] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.380689] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.380689] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.380690] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.380691] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.422558] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.422558] Raw EDID: [ 8.422559] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.422559] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.422560] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.422561] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.422561] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.422562] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.422563] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.422563] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.464493] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.464494] Raw EDID: [ 8.464494] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.464495] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.464496] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.464496] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.464497] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.464498] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.464498] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.464499] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.464501] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 8.464502] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 8.464504] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 8.464509] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 8.464510] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 8.464515] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 8.464516] [drm:intel_crt_detect], CRT not detected via hotplug [ 8.507802] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.507802] Raw EDID: [ 8.507803] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.507804] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.507804] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.507805] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.507806] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.507806] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.507807] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.507808] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.549680] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.549680] Raw EDID: [ 8.549681] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.549682] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.549682] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.549683] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.549684] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.549684] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.549685] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.549686] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.591578] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.591578] Raw EDID: [ 8.591579] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.591580] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.591580] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.591581] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.591582] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.591582] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.591583] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.591584] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.633518] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.633518] Raw EDID: [ 8.633519] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.633520] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.633520] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.633521] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.633522] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.633522] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.633523] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.633524] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.633525] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 8.633525] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 8.633526] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 8.633535] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 8.633536] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 8.676866] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.676866] Raw EDID: [ 8.676867] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.676868] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.676868] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.676869] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.676870] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.676870] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.676871] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.676872] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.718751] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.718751] Raw EDID: [ 8.718752] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.718753] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.718753] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.718754] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.718755] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.718755] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.718756] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.718757] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.760556] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.760556] Raw EDID: [ 8.760557] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.760558] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.760558] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.760559] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.760560] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.760560] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.760561] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.760562] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.802508] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.802509] Raw EDID: [ 8.802509] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.802510] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.802511] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.802511] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.802512] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.802513] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.802513] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.802514] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.802515] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 8.802516] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 8.802520] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 8.802521] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 8.845936] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.845936] Raw EDID: [ 8.845937] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.845938] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.845938] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.845939] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.845940] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.845940] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.845941] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.845942] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.887868] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.887869] Raw EDID: [ 8.887869] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.887870] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.887871] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.887871] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.887872] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.887873] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.887873] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.887874] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.929670] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.929671] Raw EDID: [ 8.929671] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.929672] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.929673] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.929673] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.929674] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.929675] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.929675] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.929676] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.971592] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 8.971592] Raw EDID: [ 8.971593] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 8.971594] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.971594] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.971595] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.971596] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.971596] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.971597] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.971598] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.971599] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 8.971600] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 8.971605] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 8.971606] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 8.974206] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.983445] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.990115] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 8.994156] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 8.994163] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 8.994178] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 8.994181] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 8.996792] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.003406] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.010058] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.014099] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.014106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 9.014134] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 9.014136] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 9.020753] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 9.020759] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.020763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 9.020771] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 9.020782] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 9.027408] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 9.027414] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.027418] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 9.027441] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 9.027443] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 9.034051] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 9.034057] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 9.034060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 9.034080] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 9.034081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 9.040697] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 9.040702] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 9.040706] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 9.040726] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 9.040728] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 9.043337] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.049943] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.056590] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.060634] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.060640] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 9.060655] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 9.060658] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 9.063275] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.069887] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.076533] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.080577] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.080583] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 9.080611] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 9.080613] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 9.083217] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.089829] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.096476] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.100519] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.100525] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 9.100540] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 9.100543] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 9.103156] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.109772] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.116418] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.120454] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.120460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 9.121533] [drm:drm_mode_addfb], [FB:26] [ 9.123697] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 9.123699] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 9.123704] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 9.123705] [drm:intel_crt_detect], CRT not detected via hotplug [ 9.167019] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.167020] Raw EDID: [ 9.167021] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.167022] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.167023] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.167023] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.167024] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.167025] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.167025] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.167026] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.208860] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.208860] Raw EDID: [ 9.208861] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.208862] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.208862] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.208863] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.208864] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.208864] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.208865] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.208866] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.250778] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.250778] Raw EDID: [ 9.250779] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.250780] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.250780] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.250781] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.250782] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.250782] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.250783] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.250784] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.292727] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.292728] Raw EDID: [ 9.292728] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.292729] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.292730] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.292730] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.292731] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.292732] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.292732] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.292733] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.292735] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 9.292735] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 9.292737] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 9.292742] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 9.292743] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 9.292748] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 9.292749] [drm:intel_crt_detect], CRT not detected via hotplug [ 9.336102] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.336103] Raw EDID: [ 9.336103] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.336104] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.336105] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.336105] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.336106] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.336107] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.336107] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.336108] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.377989] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.377990] Raw EDID: [ 9.377991] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.377991] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.377992] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.377993] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.377993] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.377994] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.377995] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.377995] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.419806] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.419806] Raw EDID: [ 9.419807] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.419807] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.419808] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.419809] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.419809] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.419810] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.419811] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.419811] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.461702] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.461703] Raw EDID: [ 9.461703] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.461704] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.461705] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.461705] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.461706] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.461707] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.461707] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.461708] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.461709] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 9.461710] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 9.461711] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 9.461717] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 9.461718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 9.505018] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.505018] Raw EDID: [ 9.505019] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.505020] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505020] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505021] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505022] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505022] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505023] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.505024] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.546963] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.546964] Raw EDID: [ 9.546965] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.546965] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.546966] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.546967] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.546967] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.546968] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.546969] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.546969] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.588878] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.588879] Raw EDID: [ 9.588879] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.588880] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.588881] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.588881] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.588882] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.588883] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.588883] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.588884] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.630689] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.630690] Raw EDID: [ 9.630691] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.630691] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.630692] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.630693] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.630693] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.630694] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.630695] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.630695] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.630697] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 9.630697] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 9.630701] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 9.630702] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 9.674030] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.674030] Raw EDID: [ 9.674031] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.674032] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.674032] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.674033] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.674034] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.674034] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.674035] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.674036] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.715922] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.715922] Raw EDID: [ 9.715923] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.715924] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.715924] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.715925] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.715926] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.715926] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.715927] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.715928] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.757842] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.757843] Raw EDID: [ 9.757844] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.757844] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.757845] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.757846] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.757846] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.757847] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.757848] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.757848] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.799791] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 9.799792] Raw EDID: [ 9.799792] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 9.799793] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.799793] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.799794] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.799795] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.799795] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.799796] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.799797] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.799798] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 9.799799] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 9.799804] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 9.799805] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 9.802410] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.811616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.817743] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.821792] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.821798] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 9.821818] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 9.821829] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 9.824431] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.831038] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.837685] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.841734] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.841741] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 9.841762] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 9.841774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 9.848390] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 9.848396] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.848399] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 9.848407] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 9.848418] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 9.855035] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 9.855041] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 9.855045] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 9.855066] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 9.855067] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 9.861681] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 9.861687] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 9.861691] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 9.861708] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 9.861709] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 9.868333] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 9.868339] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 9.868342] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 9.868363] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 9.868364] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 9.870965] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.877572] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.884216] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.888269] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.888275] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 9.888290] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 9.888293] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 9.890908] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.897514] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.904155] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.908214] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.908220] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 9.908241] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 9.908252] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 9.910850] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.917458] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.924100] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.928156] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.928162] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 9.928177] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 9.928180] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 9.930793] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.937399] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.944049] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 9.948101] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 9.948108] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 10.000090] ksplashx[1665]: segfault at ffffff50 ip 08056cec sp bf8124e0 error 4 in ksplashx[8048000+1c000] [ 10.532029] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.539003] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.545653] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.553013] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 10.555646] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.562256] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.568921] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.572968] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 10.575611] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.582220] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.588866] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 10.592915] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 10.636309] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.636311] Raw EDID: [ 10.636313] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.636313] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.636314] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.636315] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.636315] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.636316] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.636317] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.636317] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.665766] [drm:i915_driver_open], [ 10.678223] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.678224] Raw EDID: [ 10.678225] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.678226] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.678227] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.678227] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.678228] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.678229] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.678229] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.678230] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.720189] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.720189] Raw EDID: [ 10.720190] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.720190] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.720191] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.720192] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.720192] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.720193] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.720194] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.720194] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.762143] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.762144] Raw EDID: [ 10.762144] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.762145] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.762146] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.762146] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.762147] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.762148] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.762148] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.762149] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.762152] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 10.764741] [drm:i915_driver_open], [ 10.765757] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 10.765759] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 10.772404] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 10.772407] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 10.772442] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 10.772444] [drm:intel_crt_detect], CRT not detected via hotplug [ 10.774256] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 10.815812] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.815813] Raw EDID: [ 10.815815] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.815815] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.815816] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.815817] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.815817] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.815818] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.815819] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.815819] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.857757] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.857758] Raw EDID: [ 10.857759] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.857759] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.857760] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.857761] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.857761] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.857762] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.857763] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.857763] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.899606] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.899607] Raw EDID: [ 10.899608] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.899608] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.899609] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.899610] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.899610] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.899611] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.899612] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.899612] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.941521] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.941522] Raw EDID: [ 10.941522] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.941523] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.941524] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.941524] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.941525] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.941526] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.941526] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.941527] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.941529] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 10.941530] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 10.941556] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 10.941562] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 10.941563] [drm:intel_crt_detect], CRT not detected via hotplug [ 10.984944] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 10.984946] Raw EDID: [ 10.984947] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 10.984948] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.984949] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.984949] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.984950] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.984951] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.984951] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.984952] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.995892] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr,commit=0 [ 10.998392] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0 [ 11.026064] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.026065] Raw EDID: [ 11.026066] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.026067] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.026068] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.026068] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.026069] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.026070] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.026070] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.026071] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.067910] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.067910] Raw EDID: [ 11.067911] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.067912] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.067912] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.067913] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.067914] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.067914] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.067915] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.067916] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.109784] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.109784] Raw EDID: [ 11.109785] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.109786] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.109787] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.109787] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.109788] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.109789] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.109789] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.109790] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.109792] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 11.109794] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 11.109797] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 11.109808] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 11.109810] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 11.109811] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 11.109812] [drm:intel_crt_detect], CRT not detected via hotplug [ 11.153115] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.153116] Raw EDID: [ 11.153117] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.153117] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.153118] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.153119] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.153119] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.153120] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.153121] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.153121] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.195042] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.195043] Raw EDID: [ 11.195044] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.195044] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.195045] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.195046] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.195046] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.195047] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.195048] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.195048] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.236894] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.236894] Raw EDID: [ 11.236895] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.236896] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.236896] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.236897] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.236898] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.236898] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.236899] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.236900] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.278720] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.278720] Raw EDID: [ 11.278721] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.278721] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.278722] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.278723] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.278723] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.278724] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.278725] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.278725] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.278727] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 11.278727] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 11.278729] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 11.278739] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 11.278740] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 11.322087] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.322088] Raw EDID: [ 11.322088] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.322089] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.322090] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.322090] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.322091] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.322092] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.322092] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.322093] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.364055] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.364055] Raw EDID: [ 11.364056] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.364056] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.364057] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.364058] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.364058] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.364059] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.364060] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.364060] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.406010] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.406011] Raw EDID: [ 11.406011] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.406012] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.406013] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.406013] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.406014] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.406015] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.406015] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.406016] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.447955] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.447955] Raw EDID: [ 11.447956] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.447957] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.447957] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.447958] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.447959] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.447959] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.447960] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.447961] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.447962] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 11.447963] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 11.447966] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 11.447967] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 11.491316] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.491316] Raw EDID: [ 11.491317] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.491318] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.491318] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.491319] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.491320] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.491320] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.491321] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.491322] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.533127] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.533127] Raw EDID: [ 11.533128] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.533129] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.533129] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.533130] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.533131] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.533131] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.533132] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.533133] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.574938] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.574938] Raw EDID: [ 11.574939] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.574940] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.574940] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.574941] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.574942] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.574942] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.574943] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.574944] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.616801] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 11.616801] Raw EDID: [ 11.616802] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 11.616803] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.616803] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.616804] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.616805] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.616805] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.616806] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.616807] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.616808] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 11.616809] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 11.616814] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 11.616815] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 11.619412] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.625914] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.632561] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.636607] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.636614] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 11.636629] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 11.636632] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 11.639248] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.645879] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.652504] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.656551] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.656557] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 11.656585] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 11.656587] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 11.663204] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 11.663210] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 11.663214] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 11.663221] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 11.663224] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 11.669854] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 11.669860] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 11.669863] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 11.669883] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 11.669884] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 11.676500] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 11.676506] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 11.676510] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 11.676531] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 11.676533] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 11.683148] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 11.683154] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 11.683157] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 11.683177] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.683179] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 11.685784] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.692391] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.699037] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.703090] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.703096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 11.703120] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.703121] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 11.705727] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.712334] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.718981] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.723030] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.723037] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 11.723063] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 11.723065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 11.725669] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.732276] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.738925] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.742975] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.742981] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 11.742996] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 11.743006] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 11.745610] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.752219] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.758866] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 11.762917] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.762923] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 12.494143] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 12.494147] [drm:intel_crt_detect], CRT not detected via hotplug [ 12.537526] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.537529] Raw EDID: [ 12.537530] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.537531] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.537531] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.537532] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.537533] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.537533] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.537534] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.537535] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.579364] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.579366] Raw EDID: [ 12.579367] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.579367] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.579368] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.579369] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.579369] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.579370] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.579371] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.579371] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.621114] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.621116] Raw EDID: [ 12.621117] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.621117] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.621118] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.621119] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.621119] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.621120] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.621121] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.621121] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.663027] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.663029] Raw EDID: [ 12.663030] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.663031] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.663031] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.663032] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.663033] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.663033] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.663034] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.663035] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.663038] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 12.663039] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 12.663040] [drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2 [ 12.706407] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.706408] Raw EDID: [ 12.706409] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.706410] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.706411] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.706411] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.706412] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.706413] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.706413] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.706414] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.749073] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.749074] Raw EDID: [ 12.749075] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.749076] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.749076] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.749077] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.749078] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.749078] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.749079] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.749080] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.791760] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.791761] Raw EDID: [ 12.791762] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.791763] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.791764] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.791764] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.791765] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.791766] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.791766] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.791767] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.833190] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 12.833192] Raw EDID: [ 12.833193] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 12.833193] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.833194] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.833195] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.833195] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.833196] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.833197] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.833198] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.833200] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 12.833201] [drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2 [ 12.835800] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.843382] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.852400] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.856438] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 12.856442] [drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 2 to 2 [ 12.863092] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 12.863096] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 12.863098] [drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2 [ 12.869741] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 12.869745] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 12.869747] [drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2 [ 12.872358] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.878991] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.885637] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.889678] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 12.889681] [drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 2 to 2 [ 12.892285] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.898932] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.908905] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 12.912943] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 12.912947] [drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2 [ 13.009563] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 13.009567] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 13.009573] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 13.009575] [drm:intel_crt_detect], CRT not detected via hotplug [ 13.052968] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.052970] Raw EDID: [ 13.052972] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.052973] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.052973] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.052974] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.052975] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.052975] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.052976] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.052977] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.094889] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.094890] Raw EDID: [ 13.094891] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.094892] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.094893] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.094894] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.094894] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.094895] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.094896] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.094896] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.136737] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.136739] Raw EDID: [ 13.136740] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.136741] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.136741] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.136742] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.136743] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.136743] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.136744] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.136745] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.178648] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.178649] Raw EDID: [ 13.178650] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.178651] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.178651] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.178652] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.178653] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.178653] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.178654] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.178655] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.178657] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 13.178658] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 13.178661] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 13.178673] [drm:drm_mode_getconnector], [CONNECTOR:9:?] [ 13.178675] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] [ 13.178680] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 13.178681] [drm:intel_crt_detect], CRT not detected via hotplug [ 13.221927] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.221929] Raw EDID: [ 13.221930] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.221930] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.221931] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.221932] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.221932] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.221933] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.221934] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.221934] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.263781] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.263782] Raw EDID: [ 13.263783] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.263784] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.263785] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.263785] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.263786] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.263787] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.263787] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.263788] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.305708] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.305709] Raw EDID: [ 13.305710] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.305710] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.305711] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.305712] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.305712] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.305713] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.305714] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.305714] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.347626] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.347626] Raw EDID: [ 13.347627] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.347628] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.347628] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.347629] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.347630] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.347630] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.347631] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.347632] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.347634] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 13.347635] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 13.347637] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected [ 13.347653] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 13.347655] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 13.391016] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.391017] Raw EDID: [ 13.391017] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.391018] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.391019] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.391019] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.391020] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.391021] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.391021] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.391022] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.432911] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.432911] Raw EDID: [ 13.432912] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.432913] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.432913] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.432914] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.432915] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.432915] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.432916] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.432917] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.474833] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.474833] Raw EDID: [ 13.474834] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.474835] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.474835] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.474836] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.474837] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.474837] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.474838] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.474839] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.516668] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.516669] Raw EDID: [ 13.516670] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.516670] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.516671] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.516672] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.516672] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.516673] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.516674] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.516674] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.516675] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 13.516676] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 13.516680] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 13.516681] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] [ 13.560022] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.560022] Raw EDID: [ 13.560023] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.560024] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.560024] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.560025] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.560026] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.560026] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.560027] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.560028] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.602020] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.602020] Raw EDID: [ 13.602021] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.602022] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.602022] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.602023] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.602024] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.602024] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.602025] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.602026] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.643882] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.643883] Raw EDID: [ 13.643883] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.643884] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.643885] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.643885] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.643886] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.643887] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.643887] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.643888] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.685802] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 13.685802] Raw EDID: [ 13.685803] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 13.685803] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.685804] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.685805] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.685805] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.685806] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.685807] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.685807] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 13.685809] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 13.685809] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:HDMI-A-1] disconnected [ 13.685814] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 13.685816] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 13.688419] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.696667] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.703313] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.707359] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.707365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 13.707381] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 13.707392] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] [ 13.710001] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.716611] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.723256] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.727304] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.727310] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DP-1] disconnected [ 13.727338] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 13.727340] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 13.737263] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 13.737268] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 13.737272] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 13.737286] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 13.737289] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] [ 13.743927] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 13.743933] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 13.743936] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected [ 13.743956] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 13.743958] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 13.753885] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 13.753890] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 13.753894] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 13.753908] [drm:drm_mode_getconnector], [CONNECTOR:20:?] [ 13.753911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] [ 13.763870] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 13.763876] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 13.763879] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:HDMI-A-3] disconnected [ 13.763900] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 13.763901] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 13.766507] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.776417] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.783086] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.787131] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.787137] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 13.787152] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 13.787155] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] [ 13.789771] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.796383] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.803027] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.807073] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.807079] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-2] disconnected [ 13.807108] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 13.807109] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 13.809717] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.816322] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.822972] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.827016] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.827022] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 13.827037] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 13.827040] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] [ 13.829656] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.836266] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.842914] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 13.846960] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.846966] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-3] disconnected [ 23.183626] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40010, result 0 [ 23.183632] [drm:intel_crt_detect], CRT not detected via hotplug [ 23.226947] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.226948] Raw EDID: [ 23.226949] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.226950] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.226951] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.226951] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.226952] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.226953] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.226953] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.226954] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.268868] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.268868] Raw EDID: [ 23.268869] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.268870] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.268870] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.268871] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.268872] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.268872] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.268873] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.268874] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.310724] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.310724] Raw EDID: [ 23.310725] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.310725] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.310726] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.310727] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.310727] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.310728] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.310729] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.310729] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.352589] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.352589] Raw EDID: [ 23.352590] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.352591] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.352591] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.352592] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.352593] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.352593] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.352594] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.352595] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.352597] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 23.352598] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 23.352599] [drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 2 to 2 [ 23.395890] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.395891] Raw EDID: [ 23.395892] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.395892] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.395893] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.395894] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.395894] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.395895] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.395896] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.395896] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.437773] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.437774] Raw EDID: [ 23.437775] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.437776] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.437777] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.437777] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.437778] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.437779] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.437779] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.437780] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.479648] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.479649] Raw EDID: [ 23.479650] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.479650] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.479651] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.479652] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.479652] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.479653] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.479654] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.479654] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.521591] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130 [ 23.521592] Raw EDID: [ 23.521592] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff [ 23.521593] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.521594] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.521594] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.521595] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.521596] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.521596] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.521597] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.521599] i915 0000:00:02.0: HDMI-A-1: EDID block 0 invalid. [ 23.521600] [drm:output_poll_execute], [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2 [ 23.524206] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.531892] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.538539] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.542591] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 23.542597] [drm:output_poll_execute], [CONNECTOR:15:DP-1] status updated from 2 to 2 [ 23.549247] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 23.549252] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 23.549255] [drm:output_poll_execute], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2 [ 23.555890] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 23.555896] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd [ 23.555899] [drm:output_poll_execute], [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2 [ 23.558503] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.565130] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.571778] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.575829] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 23.575835] [drm:output_poll_execute], [CONNECTOR:21:DP-2] status updated from 2 to 2 [ 23.578445] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.585076] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.591722] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f [ 23.595784] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 23.595789] [drm:output_poll_execute], [CONNECTOR:23:DP-3] status updated from 2 to 2 ^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2012-10-15 9:58 UTC | newest]
Thread overview: 25+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <507812E8.3060607@compro.net>
2012-10-12 21:14 ` Intel graphics drm issue? Bruno Prémont
2012-10-13 18:57 ` Mark Hounschell
2012-10-13 19:17 ` Mark Hounschell
2012-10-14 8:41 ` Bruno Prémont
2012-10-14 10:34 ` Mark Hounschell
2012-10-14 10:52 ` Mark Hounschell
2012-10-14 11:03 ` Bruno Prémont
2012-10-14 16:54 ` Mark Hounschell
2012-10-14 17:22 ` Bruno Prémont
2012-10-14 18:03 ` Mark Hounschell
2012-10-14 18:19 ` Bruno Prémont
2012-10-14 18:57 ` Mark Hounschell
2012-10-14 20:40 ` Bruno Prémont
2012-10-15 9:58 ` Mark Hounschell
2012-10-14 8:58 ` Daniel Vetter
2012-10-14 10:20 ` [Intel-gfx] " Mark Hounschell
2012-10-14 11:26 ` Daniel Vetter
2012-10-14 11:39 ` [Intel-gfx] " Mark Hounschell
2012-10-14 14:19 ` Mark Hounschell
2012-10-14 14:40 ` Daniel Vetter
2012-10-14 15:41 ` Mark Hounschell
2012-10-14 15:53 ` Daniel Vetter
2012-10-14 15:55 ` Bruno Prémont
2012-10-14 16:09 ` Mark Hounschell
2012-10-14 16:13 ` Mark Hounschell
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox