From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 3/5] drm/i915: Check for IVB instead of gen7 when we think about IVB CPU eDP
Date: Thu, 17 May 2018 20:45:36 +0300 [thread overview]
Message-ID: <87o9he41mn.fsf@intel.com> (raw)
In-Reply-To: <20180517170309.28630-3-ville.syrjala@linux.intel.com>
On Thu, 17 May 2018, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Almost all of the GEN7 checks in the DP code are actually looking for
> IVB. HSW doesn't even take these codepaths, and VLV is excluded on
> account of not having port A. So let's change the checks to IS_IVB to
> make the code less confusing.
>
> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Yup.
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 538b10084a9d..263e4b1d1db9 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1989,7 +1989,7 @@ static void intel_dp_prepare(struct intel_encoder *encoder,
>
> /* Split out the IBX/CPU vs CPT settings */
>
> - if (IS_GEN7(dev_priv) && port == PORT_A) {
> + if (IS_IVYBRIDGE(dev_priv) && port == PORT_A) {
> if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
> intel_dp->DP |= DP_SYNC_HS_HIGH;
> if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
> @@ -2669,7 +2669,7 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder,
> if (!(tmp & DP_PORT_EN))
> goto out;
>
> - if (IS_GEN7(dev_priv) && port == PORT_A) {
> + if (IS_IVYBRIDGE(dev_priv) && port == PORT_A) {
> *pipe = PORT_TO_PIPE_CPT(tmp);
> } else if (HAS_PCH_CPT(dev_priv) && port != PORT_A) {
> enum pipe p;
> @@ -2908,7 +2908,7 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp,
> }
> I915_WRITE(DP_TP_CTL(port), temp);
>
> - } else if ((IS_GEN7(dev_priv) && port == PORT_A) ||
> + } else if ((IS_IVYBRIDGE(dev_priv) && port == PORT_A) ||
> (HAS_PCH_CPT(dev_priv) && port != PORT_A)) {
> *DP &= ~DP_LINK_TRAIN_MASK_CPT;
>
> @@ -3227,7 +3227,7 @@ intel_dp_voltage_max(struct intel_dp *intel_dp)
> return intel_ddi_dp_voltage_max(encoder);
> else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
> - else if (IS_GEN7(dev_priv) && port == PORT_A)
> + else if (IS_IVYBRIDGE(dev_priv) && port == PORT_A)
> return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
> else if (HAS_PCH_CPT(dev_priv) && port != PORT_A)
> return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
> @@ -3256,7 +3256,7 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
> default:
> return DP_TRAIN_PRE_EMPH_LEVEL_0;
> }
> - } else if (IS_GEN7(dev_priv) && port == PORT_A) {
> + } else if (IS_IVYBRIDGE(dev_priv) && port == PORT_A) {
> switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
> case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
> return DP_TRAIN_PRE_EMPH_LEVEL_2;
> @@ -3565,7 +3565,7 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp)
> signal_levels = chv_signal_levels(intel_dp);
> } else if (IS_VALLEYVIEW(dev_priv)) {
> signal_levels = vlv_signal_levels(intel_dp);
> - } else if (IS_GEN7(dev_priv) && port == PORT_A) {
> + } else if (IS_IVYBRIDGE(dev_priv) && port == PORT_A) {
> signal_levels = gen7_edp_signal_levels(train_set);
> mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
> } else if (IS_GEN6(dev_priv) && port == PORT_A) {
> @@ -3655,7 +3655,7 @@ intel_dp_link_down(struct intel_encoder *encoder,
>
> DRM_DEBUG_KMS("\n");
>
> - if ((IS_GEN7(dev_priv) && port == PORT_A) ||
> + if ((IS_IVYBRIDGE(dev_priv) && port == PORT_A) ||
> (HAS_PCH_CPT(dev_priv) && port != PORT_A)) {
> DP &= ~DP_LINK_TRAIN_MASK_CPT;
> DP |= DP_LINK_TRAIN_PAT_IDLE_CPT;
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-05-17 17:45 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-17 17:03 [PATCH 1/5] drm/i915: Use intel_ddi_dp_voltage_max() for HSW/BDW too Ville Syrjala
2018-05-17 17:03 ` [PATCH 2/5] drm/i915: Use the same vswing->max_preemph mapping on HSW/BDW as on SKL+ Ville Syrjala
2018-05-17 17:42 ` Jani Nikula
2018-05-17 17:03 ` [PATCH 3/5] drm/i915: Check for IVB instead of gen7 when we think about IVB CPU eDP Ville Syrjala
2018-05-17 17:45 ` Jani Nikula [this message]
2018-05-17 17:03 ` [PATCH 4/5] drm/i915: Rename SNB/IVB CPU eDP signal level funcs Ville Syrjala
2018-05-17 17:48 ` Jani Nikula
2018-05-17 17:50 ` Ville Syrjälä
2018-05-17 17:03 ` [PATCH 5/5] drm/i915: Rename the remaining gen4 references to g4x in the DP code Ville Syrjala
2018-05-17 17:49 ` Jani Nikula
2018-05-18 14:27 ` Ville Syrjälä
2018-05-17 17:40 ` [PATCH 1/5] drm/i915: Use intel_ddi_dp_voltage_max() for HSW/BDW too Jani Nikula
2018-05-17 18:16 ` ✓ Fi.CI.BAT: success for series starting with [1/5] " Patchwork
2018-05-17 23:00 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o9he41mn.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox