From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Matt Roper <matthew.d.roper@intel.com>
Cc: intel-gfx@lists.freedesktop.org,
Nischal Varide <nischal.varide@intel.com>,
dri-devel@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 18/18] drm/i915/display13: Enabling dithering after the CC1 pipe
Date: Thu, 11 Feb 2021 14:29:39 +0200 [thread overview]
Message-ID: <YCUjM1QwEexccF2x@intel.com> (raw)
In-Reply-To: <20210128192413.1715802-19-matthew.d.roper@intel.com>
On Thu, Jan 28, 2021 at 11:24:13AM -0800, Matt Roper wrote:
> From: Nischal Varide <nischal.varide@intel.com>
>
> If the panel is 12bpc then Dithering is not enabled in the Legacy
> dithering block , instead its Enabled after the C1 CC1 pipe post
> color space conversion.For a 6bpc pannel Dithering is enabled in
> Legacy block.
Dithering is probably going to require a whole uapi bikeshed.
Not sure we can just enable it unilaterally.
Ccing dri-devel, and Mario who had issues with dithering in the
past...
>
> Cc: Uma Shankar <uma.shankar@intel.com>
> Signed-off-by: Nischal Varide <nischal.varide@intel.com>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_color.c | 16 ++++++++++++++++
> drivers/gpu/drm/i915/display/intel_display.c | 9 ++++++++-
> drivers/gpu/drm/i915/i915_reg.h | 3 ++-
> 3 files changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_color.c b/drivers/gpu/drm/i915/display/intel_color.c
> index ff7dcb7088bf..9a0572bbc5db 100644
> --- a/drivers/gpu/drm/i915/display/intel_color.c
> +++ b/drivers/gpu/drm/i915/display/intel_color.c
> @@ -1604,6 +1604,20 @@ static u32 icl_csc_mode(const struct intel_crtc_state *crtc_state)
> return csc_mode;
> }
>
> +static u32 dither_after_cc1_12bpc(const struct intel_crtc_state *crtc_state)
> +{
> + u32 gamma_mode = crtc_state->gamma_mode;
> + struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
> +
> + if (HAS_DISPLAY13(i915)) {
> + if (!crtc_state->dither_force_disable &&
> + (crtc_state->pipe_bpp == 36))
> + gamma_mode |= GAMMA_MODE_DITHER_AFTER_CC1;
> + }
> +
> + return gamma_mode;
> +}
> +
> static int icl_color_check(struct intel_crtc_state *crtc_state)
> {
> int ret;
> @@ -1614,6 +1628,8 @@ static int icl_color_check(struct intel_crtc_state *crtc_state)
>
> crtc_state->gamma_mode = icl_gamma_mode(crtc_state);
>
> + crtc_state->gamma_mode = dither_after_cc1_12bpc(crtc_state);
> +
> crtc_state->csc_mode = icl_csc_mode(crtc_state);
>
> crtc_state->preload_luts = intel_can_preload_luts(crtc_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 4dc4b1be0809..e3dbcd956fc6 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -8098,9 +8098,15 @@ static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state)
> break;
> }
>
> - if (crtc_state->dither)
> + /*
> + * If 12bpc panel then, Enables dithering after the CC1 pipe
> + * post color space conversion and not here
> + */
> +
> + if (crtc_state->dither && (crtc_state->pipe_bpp != 36))
> val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
>
> +
> if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
> crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
> val |= PIPEMISC_OUTPUT_COLORSPACE_YUV;
> @@ -10760,6 +10766,7 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
> */
> pipe_config->dither = (pipe_config->pipe_bpp == 6*3) &&
> !pipe_config->dither_force_disable;
> +
> drm_dbg_kms(&i915->drm,
> "hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
> base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 128b835c0adb..27f25214a839 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6132,7 +6132,7 @@ enum {
> #define PIPEMISC_DITHER_8_BPC (0 << 5)
> #define PIPEMISC_DITHER_10_BPC (1 << 5)
> #define PIPEMISC_DITHER_6_BPC (2 << 5)
> -#define PIPEMISC_DITHER_12_BPC (3 << 5)
> +#define PIPEMISC_DITHER_12_BPC (4 << 5)
> #define PIPEMISC_DITHER_ENABLE (1 << 4)
> #define PIPEMISC_DITHER_TYPE_MASK (3 << 2)
> #define PIPEMISC_DITHER_TYPE_SP (0 << 2)
> @@ -7668,6 +7668,7 @@ enum {
> #define GAMMA_MODE_MODE_12BIT (2 << 0)
> #define GAMMA_MODE_MODE_SPLIT (3 << 0) /* ivb-bdw */
> #define GAMMA_MODE_MODE_12BIT_MULTI_SEGMENTED (3 << 0) /* icl + */
> +#define GAMMA_MODE_DITHER_AFTER_CC1 (1 << 26)
>
> /* DMC/CSR */
> #define CSR_PROGRAM(i) _MMIO(0x80000 + (i) * 4)
> --
> 2.25.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-02-11 12:29 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-28 19:23 [Intel-gfx] [PATCH 00/18] Preliminary Display13 support Matt Roper
2021-01-28 19:23 ` [Intel-gfx] [PATCH 01/18] drm/i915/display13: add Display13 characteristics Matt Roper
2021-02-11 0:03 ` Lucas De Marchi
2021-01-28 19:23 ` [Intel-gfx] [PATCH 02/18] drm/i915/display13: Handle proper AUX interrupt bits Matt Roper
2021-02-11 0:10 ` Lucas De Marchi
2021-01-28 19:23 ` [Intel-gfx] [PATCH 03/18] drm/i915/display13: Enhanced pipe underrun reporting Matt Roper
2021-02-11 0:31 ` Lucas De Marchi
2021-02-11 12:25 ` Ville Syrjälä
2021-01-28 19:23 ` [Intel-gfx] [PATCH 04/18] drm/i915/display13: Define plane capabilities Matt Roper
2021-02-11 1:05 ` Lucas De Marchi
2021-01-28 19:24 ` [Intel-gfx] [PATCH 05/18] drm/i915/display13: Support 128k plane stride Matt Roper
2021-02-11 1:17 ` Lucas De Marchi
2021-01-28 19:24 ` [Intel-gfx] [PATCH 06/18] drm/i915/display13: Only enable legacy gamma for now Matt Roper
2021-02-11 1:19 ` Lucas De Marchi
2021-01-28 19:24 ` [Intel-gfx] [PATCH 07/18] drm/i915/display13: Add Display13 power wells Matt Roper
2021-02-11 1:33 ` Lucas De Marchi
2021-01-28 19:24 ` [Intel-gfx] [PATCH 08/18] drm/i915/display13: Handle LPSP for Display 13 Matt Roper
2021-02-11 1:36 ` Lucas De Marchi
2021-01-28 19:24 ` [Intel-gfx] [PATCH 09/18] drm/i915/display13: Handle new location of outputs D and E Matt Roper
2021-01-28 19:24 ` [Intel-gfx] [PATCH 10/18] drm/i915/display13: Increase maximum watermark lines to 255 Matt Roper
2021-01-28 19:24 ` [Intel-gfx] [PATCH 11/18] drm/i915/display13: Required bandwidth increases when VT-d is active Matt Roper
2021-01-28 19:24 ` [Intel-gfx] [PATCH 12/18] drm/i915/display13: Add Wa_14011503030:d13 Matt Roper
2021-01-28 19:24 ` [Intel-gfx] [PATCH 13/18] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-01-28 19:24 ` [Intel-gfx] [PATCH 14/18] drm/i915/display13: Support DP1.4 compression BPPs Matt Roper
2021-01-28 19:24 ` [Intel-gfx] [PATCH 15/18] drm/i915/display13: Get slice height before computing rc params Matt Roper
2021-01-28 19:24 ` [Intel-gfx] [PATCH 16/18] drm/i915/display13: Calculate VDSC RC parameters Matt Roper
2021-01-28 19:24 ` [Intel-gfx] [PATCH 17/18] drm/i915/display13: Add rc_qp_table for rcparams calculation Matt Roper
2021-01-29 11:12 ` Jani Nikula
2021-01-29 11:15 ` Chris Wilson
2021-01-29 12:01 ` Jani Nikula
2021-02-10 22:24 ` Lucas De Marchi
2021-01-28 19:24 ` [Intel-gfx] [PATCH 18/18] drm/i915/display13: Enabling dithering after the CC1 pipe Matt Roper
2021-02-11 12:29 ` Ville Syrjälä [this message]
2021-02-19 3:22 ` Mario Kleiner
2021-02-19 5:44 ` Mario Kleiner
2021-03-01 4:57 ` Varide, Nischal
2021-03-01 5:43 ` Ilia Mirkin
2021-01-28 19:25 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for Preliminary Display13 support Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YCUjM1QwEexccF2x@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
--cc=nischal.varide@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox