From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>,
<intel-wired-lan@lists.osuosl.org>
Subject: Re: [Intel-wired-lan] [PATCH net-next 5/5] ice: use debugfs to output FW log data
Date: Wed, 30 Nov 2022 16:40:08 -0800 [thread overview]
Message-ID: <1fe66e18-8c53-0893-7ed0-90ab98975360@intel.com> (raw)
In-Reply-To: <20221128214749.110-6-paul.m.stillwell.jr@intel.com>
On 11/28/2022 1:47 PM, Paul M Stillwell Jr wrote:
> The FW log data can be quite large so we don't want to use syslog.
> Instead take advantage of debugfs to write the data to.
>
> Also, a previous patch addded codde to disable FW logging when
> the driver was unloaded. The code was added to
> ice_devlink_unregister(), which didn't seem correct so move the
> disabling of FW logging on driver unload to a better place.
Since this was done in the patch directly preceding this, why don't you
just modify the previous patch to put it in the proper place?
>
> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
> ---
> drivers/net/ethernet/intel/ice/Makefile | 3 +-
> drivers/net/ethernet/intel/ice/ice.h | 24 ++++
> .../net/ethernet/intel/ice/ice_adminq_cmd.h | 2 +
> drivers/net/ethernet/intel/ice/ice_debugfs.c | 109 ++++++++++++++++++
> drivers/net/ethernet/intel/ice/ice_devlink.c | 20 ----
> drivers/net/ethernet/intel/ice/ice_main.c | 98 ++++++++++++++++
> 6 files changed, 235 insertions(+), 21 deletions(-)
> create mode 100644 drivers/net/ethernet/intel/ice/ice_debugfs.c
>
> diff --git a/drivers/net/ethernet/intel/ice/Makefile b/drivers/net/ethernet/intel/ice/Makefile
> index 750fed7e07d7..5e0013330c46 100644
> --- a/drivers/net/ethernet/intel/ice/Makefile
> +++ b/drivers/net/ethernet/intel/ice/Makefile
> @@ -33,7 +33,8 @@ ice-y := ice_main.o \
> ice_ethtool.o \
> ice_repr.o \
> ice_tc_lib.o \
> - ice_fwlog.o
> + ice_fwlog.o \
> + ice_debugfs.o
> ice-$(CONFIG_PCI_IOV) += \
> ice_sriov.o \
> ice_virtchnl.o \
> diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
> index ea64bcff108a..c8f1f34b8fbc 100644
> --- a/drivers/net/ethernet/intel/ice/ice.h
> +++ b/drivers/net/ethernet/intel/ice/ice.h
> @@ -552,6 +552,9 @@ struct ice_pf {
> struct ice_vsi_stats **vsi_stats;
> struct ice_sw *first_sw; /* first switch created by firmware */
> u16 eswitch_mode; /* current mode of eswitch */
> +#ifdef CONFIG_DEBUG_FS
> + struct dentry *ice_debugfs_pf;
> +#endif /* CONFIG_DEBUG_FS */
> struct ice_vfs vfs;
> DECLARE_BITMAP(features, ICE_F_MAX);
> DECLARE_BITMAP(state, ICE_STATE_NBITS);
> @@ -634,6 +637,8 @@ struct ice_pf {
> #define ICE_VF_AGG_NODE_ID_START 65
> #define ICE_MAX_VF_AGG_NODES 32
> struct ice_agg_node vf_agg_node[ICE_MAX_VF_AGG_NODES];
> + struct list_head fwlog_data_list;
> + u8 fwlog_list_count;
> };
>
> struct ice_netdev_priv {
> @@ -648,6 +653,15 @@ struct ice_netdev_priv {
> struct list_head tc_indr_block_priv_list;
> };
>
> +struct ice_fwlog_data {
> + struct list_head list;
> + u16 data_size;
> + u8 *data;
> +};
> +
> +/* define the maximum number of items that can be in the list */
> +#define ICE_FWLOG_MAX_SIZE 64
> +
> /**
> * ice_vector_ch_enabled
> * @qv: pointer to q_vector, can be NULL
> @@ -872,6 +886,16 @@ static inline bool ice_is_adq_active(struct ice_pf *pf)
> return false;
> }
>
> +#ifdef CONFIG_DEBUG_FS
> +void ice_debugfs_fwlog_init(struct ice_pf *pf);
> +void ice_debugfs_init(void);
> +void ice_debugfs_exit(void);
> +#else
> +static inline void ice_debugfs_fwlog_init(struct ice_pf *pf) { }
> +static inline void ice_debugfs_init(void) { }
> +static inline void ice_debugfs_exit(void) { }
> +#endif /* CONFIG_DEBUG_FS */
> +
> bool netif_is_ice(struct net_device *dev);
> int ice_vsi_setup_tx_rings(struct ice_vsi *vsi);
> int ice_vsi_setup_rx_rings(struct ice_vsi *vsi);
> diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
> index 8fa18bc5d441..d17bcc778bdd 100644
> --- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
> +++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
> @@ -2406,11 +2406,13 @@ enum ice_adminq_opc {
>
> /* Standalone Commands/Events */
> ice_aqc_opc_event_lan_overflow = 0x1001,
> +
> /* FW Logging Commands */
> ice_aqc_opc_fw_logs_config = 0xFF30,
> ice_aqc_opc_fw_logs_register = 0xFF31,
> ice_aqc_opc_fw_logs_query = 0xFF32,
> ice_aqc_opc_fw_logs_event = 0xFF33,
> + ice_aqc_opc_fw_logs_get = 0xFF34,
I don't think I see this being used.
> };
>
> #endif /* _ICE_ADMINQ_CMD_H_ */
> diff --git a/drivers/net/ethernet/intel/ice/ice_debugfs.c b/drivers/net/ethernet/intel/ice/ice_debugfs.c
> new file mode 100644
> index 000000000000..767df937f56a
> --- /dev/null
> +++ b/drivers/net/ethernet/intel/ice/ice_debugfs.c
> @@ -0,0 +1,109 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2018, Intel Corporation. */
> +
> +#include <linux/fs.h>
> +#include <linux/debugfs.h>
> +#include <linux/random.h>
> +#include "ice.h"
> +
> +static struct dentry *ice_debugfs_root;
> +
> +/**
> + * ice_debugfs_command_read - read from command datum
> + * @filp: the opened file
> + * @buffer: where to write the data for the user to read
> + * @count: the size of the user's buffer
> + * @ppos: file position offset
> + */
> +static ssize_t ice_debugfs_command_read(struct file *filp, char __user *buffer,
> + size_t count, loff_t *ppos)
> +{
> + struct ice_pf *pf = filp->private_data;
> + struct device *dev = ice_pf_to_dev(pf);
> + struct ice_fwlog_data *log, *tmp_log;
> + int data_copied = 0;
> +
> + if (list_empty(&pf->fwlog_data_list)) {
> + dev_info(dev, "FW log is empty\n");
> + return 0;
> + }
> +
> + list_for_each_entry_safe(log, tmp_log, &pf->fwlog_data_list, list) {
> + u16 cur_buf_len = log->data_size;
> + int retval;
> +
> + if (cur_buf_len > count)
> + break;
> +
> + retval = copy_to_user(buffer, log->data, cur_buf_len);
> + if (retval)
> + return -EFAULT;
> +
> + data_copied += cur_buf_len;
> + buffer += cur_buf_len;
> + count -= cur_buf_len;
> + *ppos += cur_buf_len;
> +
> + /* don't delete the list element until we know it got copied */
> + kfree(log->data);
> + list_del(&log->list);
> + kfree(log);
> + pf->fwlog_list_count--;
> + }
> +
> + return data_copied;
> +}
> +
> +static const struct file_operations ice_debugfs_command_fops = {
> + .owner = THIS_MODULE,
> + .open = simple_open,
> + .read = ice_debugfs_command_read,
> +};
> +
> +/**
> + * ice_debugfs_fwlog_init - setup the debugfs directory
> + * @pf: the ice that is starting up
> + */
> +void ice_debugfs_fwlog_init(struct ice_pf *pf)
> +{
> + const char *name = pci_name(pf->pdev);
> + struct dentry *pfile;
> +
> + /* only support fw log commands on PF 0 */
> + if (pf->hw.bus.func)
> + return;
> +
> + pf->ice_debugfs_pf = debugfs_create_dir(name, ice_debugfs_root);
> + if (IS_ERR(pf->ice_debugfs_pf))
> + return;
> +
> + pfile = debugfs_create_file("fwlog", 0400, pf->ice_debugfs_pf, pf,
> + &ice_debugfs_command_fops);
> + if (!pfile)
> + goto create_failed;
> +
> + return;
> +
> +create_failed:
> + dev_err(ice_pf_to_dev(pf), "debugfs dir/file for %s failed\n", name);
> + debugfs_remove_recursive(pf->ice_debugfs_pf);
> +}
> +
> +/**
> + * ice_debugfs_init - create root directory for debugfs entries
> + */
> +void ice_debugfs_init(void)
> +{
> + ice_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
> + if (IS_ERR(ice_debugfs_root))
> + pr_info("init of debugfs failed\n");
> +}
> +
> +/**
> + * ice_debugfs_exit - remove debugfs entries
> + */
> +void ice_debugfs_exit(void)
> +{
> + debugfs_remove_recursive(ice_debugfs_root);
> + ice_debugfs_root = NULL;
> +}
> diff --git a/drivers/net/ethernet/intel/ice/ice_devlink.c b/drivers/net/ethernet/intel/ice/ice_devlink.c
> index 923556e6ae79..148902b515bf 100644
> --- a/drivers/net/ethernet/intel/ice/ice_devlink.c
> +++ b/drivers/net/ethernet/intel/ice/ice_devlink.c
> @@ -1739,26 +1739,6 @@ void ice_devlink_register(struct ice_pf *pf)
> */
> void ice_devlink_unregister(struct ice_pf *pf)
> {
> - struct ice_hw *hw = &pf->hw;
> -
> - /* make sure FW logging is disabled to not put the FW in a weird state
> - * for the next driver load
> - */
> - if (hw->fwlog_ena) {
> - int status;
> -
> - hw->fwlog_cfg.options &= ~ICE_FWLOG_OPTION_ARQ_ENA;
> - status = ice_fwlog_set(hw, &hw->fwlog_cfg);
> - if (status)
> - dev_warn(ice_pf_to_dev(pf), "Unable to turn off FW logging, status: %d\n",
> - status);
> -
> - status = ice_fwlog_unregister(hw);
> - if (status)
> - dev_warn(ice_pf_to_dev(pf), "Unable to unregister FW logging, status: %d\n",
> - status);
> - }
> -
> devlink_unregister(priv_to_devlink(pf));
> }
>
> diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
> index 517702af327c..01cf4cb78009 100644
> --- a/drivers/net/ethernet/intel/ice/ice_main.c
> +++ b/drivers/net/ethernet/intel/ice/ice_main.c
> @@ -1213,6 +1213,45 @@ ice_handle_link_event(struct ice_pf *pf, struct ice_rq_event_info *event)
> return status;
> }
>
> +/**
> + * ice_get_fwlog_data - copy the FW log data from ARQ event
> + * @pf: PF that the FW log event is associated with
> + * @event: event structure containing FW log data
> + */
> +static void
> +ice_get_fwlog_data(struct ice_pf *pf, struct ice_rq_event_info *event)
> +{
> + struct device *dev = ice_pf_to_dev(pf);
> + struct ice_fwlog_data *fwlog;
> +
> + if (pf->fwlog_list_count >= ICE_FWLOG_MAX_SIZE) {
> + dev_info(dev, "Reached max list size for fwlog list!\n");
> + return;
> + }
> +
> + fwlog = kzalloc(sizeof(*fwlog), GFP_KERNEL);
> + if (!fwlog) {
> + dev_warn(dev, "Couldn't allocate memory for FWlog element\n");
> + return;
> + }
> +
> + INIT_LIST_HEAD(&fwlog->list);
> +
> + fwlog->data_size = le16_to_cpu(event->desc.datalen);
> + fwlog->data = kzalloc(fwlog->data_size, GFP_KERNEL);
> + if (!fwlog->data) {
> + dev_warn(dev, "Couldn't allocate memory for FWlog data\n");
> + kfree(fwlog);
> + return;
> + }
> +
> + memcpy(fwlog->data, event->msg_buf, fwlog->data_size);
> +
> + list_add_tail(&fwlog->list, &pf->fwlog_data_list);
> +
> + pf->fwlog_list_count++;
> +}
> +
> enum ice_aq_task_state {
> ICE_AQ_TASK_WAITING = 0,
> ICE_AQ_TASK_COMPLETE,
> @@ -1486,6 +1525,9 @@ static int __ice_clean_ctrlq(struct ice_pf *pf, enum ice_ctl_q q_type)
> if (!ice_is_malicious_vf(pf, &event, i, pending))
> ice_vc_process_vf_msg(pf, &event);
> break;
> + case ice_aqc_opc_fw_logs_event:
> + ice_get_fwlog_data(pf, &event);
> + break;
> case ice_aqc_opc_lldp_set_mib_change:
> ice_dcb_process_lldp_set_mib_change(pf, &event);
> break;
> @@ -4688,6 +4730,52 @@ static int ice_register_netdev(struct ice_pf *pf)
> return err;
> }
>
> +/**
> + * ice_pf_fwlog_init - initialize FW logging on device init
> + * @pf: pointer to the PF struct
> + *
> + * This should always be called after ice_hw_init().
> + */
> +static void
> +ice_pf_fwlog_init(struct ice_pf *pf)
Is this going to expand to other things or why not just call it
ice_fwlog_init()?
> +{
> + INIT_LIST_HEAD(&pf->fwlog_data_list);
> +}
> +
> +/**
> + * ice_pf_fwlog_deinit - clear FW logging metadata on device exit
> + * @pf: pointer to the PF struct
> + */
> +static void
> +ice_pf_fwlog_deinit(struct ice_pf *pf)
same with this one
> +{
> + struct ice_fwlog_data *fwlog, *fwlog_tmp;
> + struct ice_hw *hw = &pf->hw;
> +
> + /* make sure FW logging is disabled to not put the FW in a weird state
> + * for the next driver load
> + */
> + if (hw->fwlog_ena) {
> + int status;
> +
> + hw->fwlog_cfg.options &= ~ICE_FWLOG_OPTION_ARQ_ENA;
> + status = ice_fwlog_set(hw, &hw->fwlog_cfg);
> + if (status)
> + dev_warn(ice_pf_to_dev(pf), "Unable to turn off FW logging, status: %d\n",
> + status);
> +
> + status = ice_fwlog_unregister(hw);
> + if (status)
> + dev_warn(ice_pf_to_dev(pf), "Unable to unregister FW logging, status: %d\n",
> + status);
> + }
> +
> + list_for_each_entry_safe(fwlog, fwlog_tmp, &pf->fwlog_data_list, list) {
> + kfree(fwlog->data);
> + kfree(fwlog);
> + }
> +}
> +
> /**
> * ice_probe - Device initialization routine
> * @pdev: PCI device information struct
> @@ -4773,8 +4861,12 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
> goto err_exit_unroll;
> }
>
> + ice_pf_fwlog_init(pf);
> +
> ice_init_feature_support(pf);
>
> + ice_debugfs_fwlog_init(pf);
> +
Do these need to be unrolled for error path?
> err = ice_init_ddp_config(hw, pf);
>
> /* during topology change ice_init_hw may fail */
> @@ -5139,6 +5231,8 @@ static void ice_remove(struct pci_dev *pdev)
> msleep(100);
> }
>
> + ice_pf_fwlog_deinit(pf);
> +
> ice_tc_indir_block_remove(pf);
>
> if (test_bit(ICE_FLAG_SRIOV_ENA, pf->flags)) {
> @@ -5620,10 +5714,13 @@ static int __init ice_module_init(void)
> return -ENOMEM;
> }
>
> + ice_debugfs_init();
> +
> status = pci_register_driver(&ice_driver);
> if (status) {
> pr_err("failed to register PCI driver, err %d\n", status);
> destroy_workqueue(ice_wq);
> + ice_debugfs_exit();
> }
>
> return status;
> @@ -5640,6 +5737,7 @@ static void __exit ice_module_exit(void)
> {
> pci_unregister_driver(&ice_driver);
> destroy_workqueue(ice_wq);
> + ice_debugfs_exit();
> pr_info("module unloaded\n");
> }
> module_exit(ice_module_exit);
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
next prev parent reply other threads:[~2022-12-01 0:40 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-28 21:47 [Intel-wired-lan] [PATCH net-next 0/5] add v2 FW logging for ice driver Paul M Stillwell Jr
2022-11-28 21:47 ` [Intel-wired-lan] [PATCH net-next 1/5] ice: remove FW logging code Paul M Stillwell Jr
2022-11-28 21:47 ` [Intel-wired-lan] [PATCH net-next 2/5] ice: enable devlink to check FW logging status Paul M Stillwell Jr
2022-12-01 0:39 ` Tony Nguyen
2022-11-28 21:47 ` [Intel-wired-lan] [PATCH net-next 3/5] ice: add ability to query/set FW log level and resolution Paul M Stillwell Jr
2022-11-29 11:48 ` Wilczynski, Michal
2022-11-29 13:30 ` Alexander Lobakin
2022-11-29 21:31 ` Paul M Stillwell Jr
2022-12-01 0:39 ` Tony Nguyen
2022-12-09 0:00 ` Paul M Stillwell Jr
2022-12-01 7:36 ` Paul Menzel
2022-11-28 21:47 ` [Intel-wired-lan] [PATCH net-next 4/5] ice: disable FW logging on driver unload Paul M Stillwell Jr
2022-11-29 12:05 ` Wilczynski, Michal
2022-11-29 21:31 ` Paul M Stillwell Jr
2022-12-01 0:40 ` Tony Nguyen
2022-11-28 21:47 ` [Intel-wired-lan] [PATCH net-next 5/5] ice: use debugfs to output FW log data Paul M Stillwell Jr
2022-11-29 13:53 ` Paul Menzel
2022-11-29 21:28 ` Paul M Stillwell Jr
2022-12-01 0:40 ` Tony Nguyen [this message]
2022-12-09 18:32 ` Paul M Stillwell Jr
2022-12-01 0:39 ` [Intel-wired-lan] [PATCH net-next 0/5] add v2 FW logging for ice driver Tony Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1fe66e18-8c53-0893-7ed0-90ab98975360@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=paul.m.stillwell.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox