From: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
To: intel-wired-lan@lists.osuosl.org
Subject: [Intel-wired-lan] [PATCH net-next 5/5] ice: use debugfs to output FW log data
Date: Mon, 28 Nov 2022 13:47:49 -0800 [thread overview]
Message-ID: <20221128214749.110-6-paul.m.stillwell.jr@intel.com> (raw)
In-Reply-To: <20221128214749.110-1-paul.m.stillwell.jr@intel.com>
The FW log data can be quite large so we don't want to use syslog.
Instead take advantage of debugfs to write the data to.
Also, a previous patch addded codde to disable FW logging when
the driver was unloaded. The code was added to
ice_devlink_unregister(), which didn't seem correct so move the
disabling of FW logging on driver unload to a better place.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
---
drivers/net/ethernet/intel/ice/Makefile | 3 +-
drivers/net/ethernet/intel/ice/ice.h | 24 ++++
.../net/ethernet/intel/ice/ice_adminq_cmd.h | 2 +
drivers/net/ethernet/intel/ice/ice_debugfs.c | 109 ++++++++++++++++++
drivers/net/ethernet/intel/ice/ice_devlink.c | 20 ----
drivers/net/ethernet/intel/ice/ice_main.c | 98 ++++++++++++++++
6 files changed, 235 insertions(+), 21 deletions(-)
create mode 100644 drivers/net/ethernet/intel/ice/ice_debugfs.c
diff --git a/drivers/net/ethernet/intel/ice/Makefile b/drivers/net/ethernet/intel/ice/Makefile
index 750fed7e07d7..5e0013330c46 100644
--- a/drivers/net/ethernet/intel/ice/Makefile
+++ b/drivers/net/ethernet/intel/ice/Makefile
@@ -33,7 +33,8 @@ ice-y := ice_main.o \
ice_ethtool.o \
ice_repr.o \
ice_tc_lib.o \
- ice_fwlog.o
+ ice_fwlog.o \
+ ice_debugfs.o
ice-$(CONFIG_PCI_IOV) += \
ice_sriov.o \
ice_virtchnl.o \
diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index ea64bcff108a..c8f1f34b8fbc 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -552,6 +552,9 @@ struct ice_pf {
struct ice_vsi_stats **vsi_stats;
struct ice_sw *first_sw; /* first switch created by firmware */
u16 eswitch_mode; /* current mode of eswitch */
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *ice_debugfs_pf;
+#endif /* CONFIG_DEBUG_FS */
struct ice_vfs vfs;
DECLARE_BITMAP(features, ICE_F_MAX);
DECLARE_BITMAP(state, ICE_STATE_NBITS);
@@ -634,6 +637,8 @@ struct ice_pf {
#define ICE_VF_AGG_NODE_ID_START 65
#define ICE_MAX_VF_AGG_NODES 32
struct ice_agg_node vf_agg_node[ICE_MAX_VF_AGG_NODES];
+ struct list_head fwlog_data_list;
+ u8 fwlog_list_count;
};
struct ice_netdev_priv {
@@ -648,6 +653,15 @@ struct ice_netdev_priv {
struct list_head tc_indr_block_priv_list;
};
+struct ice_fwlog_data {
+ struct list_head list;
+ u16 data_size;
+ u8 *data;
+};
+
+/* define the maximum number of items that can be in the list */
+#define ICE_FWLOG_MAX_SIZE 64
+
/**
* ice_vector_ch_enabled
* @qv: pointer to q_vector, can be NULL
@@ -872,6 +886,16 @@ static inline bool ice_is_adq_active(struct ice_pf *pf)
return false;
}
+#ifdef CONFIG_DEBUG_FS
+void ice_debugfs_fwlog_init(struct ice_pf *pf);
+void ice_debugfs_init(void);
+void ice_debugfs_exit(void);
+#else
+static inline void ice_debugfs_fwlog_init(struct ice_pf *pf) { }
+static inline void ice_debugfs_init(void) { }
+static inline void ice_debugfs_exit(void) { }
+#endif /* CONFIG_DEBUG_FS */
+
bool netif_is_ice(struct net_device *dev);
int ice_vsi_setup_tx_rings(struct ice_vsi *vsi);
int ice_vsi_setup_rx_rings(struct ice_vsi *vsi);
diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index 8fa18bc5d441..d17bcc778bdd 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -2406,11 +2406,13 @@ enum ice_adminq_opc {
/* Standalone Commands/Events */
ice_aqc_opc_event_lan_overflow = 0x1001,
+
/* FW Logging Commands */
ice_aqc_opc_fw_logs_config = 0xFF30,
ice_aqc_opc_fw_logs_register = 0xFF31,
ice_aqc_opc_fw_logs_query = 0xFF32,
ice_aqc_opc_fw_logs_event = 0xFF33,
+ ice_aqc_opc_fw_logs_get = 0xFF34,
};
#endif /* _ICE_ADMINQ_CMD_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_debugfs.c b/drivers/net/ethernet/intel/ice/ice_debugfs.c
new file mode 100644
index 000000000000..767df937f56a
--- /dev/null
+++ b/drivers/net/ethernet/intel/ice/ice_debugfs.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Intel Corporation. */
+
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/random.h>
+#include "ice.h"
+
+static struct dentry *ice_debugfs_root;
+
+/**
+ * ice_debugfs_command_read - read from command datum
+ * @filp: the opened file
+ * @buffer: where to write the data for the user to read
+ * @count: the size of the user's buffer
+ * @ppos: file position offset
+ */
+static ssize_t ice_debugfs_command_read(struct file *filp, char __user *buffer,
+ size_t count, loff_t *ppos)
+{
+ struct ice_pf *pf = filp->private_data;
+ struct device *dev = ice_pf_to_dev(pf);
+ struct ice_fwlog_data *log, *tmp_log;
+ int data_copied = 0;
+
+ if (list_empty(&pf->fwlog_data_list)) {
+ dev_info(dev, "FW log is empty\n");
+ return 0;
+ }
+
+ list_for_each_entry_safe(log, tmp_log, &pf->fwlog_data_list, list) {
+ u16 cur_buf_len = log->data_size;
+ int retval;
+
+ if (cur_buf_len > count)
+ break;
+
+ retval = copy_to_user(buffer, log->data, cur_buf_len);
+ if (retval)
+ return -EFAULT;
+
+ data_copied += cur_buf_len;
+ buffer += cur_buf_len;
+ count -= cur_buf_len;
+ *ppos += cur_buf_len;
+
+ /* don't delete the list element until we know it got copied */
+ kfree(log->data);
+ list_del(&log->list);
+ kfree(log);
+ pf->fwlog_list_count--;
+ }
+
+ return data_copied;
+}
+
+static const struct file_operations ice_debugfs_command_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = ice_debugfs_command_read,
+};
+
+/**
+ * ice_debugfs_fwlog_init - setup the debugfs directory
+ * @pf: the ice that is starting up
+ */
+void ice_debugfs_fwlog_init(struct ice_pf *pf)
+{
+ const char *name = pci_name(pf->pdev);
+ struct dentry *pfile;
+
+ /* only support fw log commands on PF 0 */
+ if (pf->hw.bus.func)
+ return;
+
+ pf->ice_debugfs_pf = debugfs_create_dir(name, ice_debugfs_root);
+ if (IS_ERR(pf->ice_debugfs_pf))
+ return;
+
+ pfile = debugfs_create_file("fwlog", 0400, pf->ice_debugfs_pf, pf,
+ &ice_debugfs_command_fops);
+ if (!pfile)
+ goto create_failed;
+
+ return;
+
+create_failed:
+ dev_err(ice_pf_to_dev(pf), "debugfs dir/file for %s failed\n", name);
+ debugfs_remove_recursive(pf->ice_debugfs_pf);
+}
+
+/**
+ * ice_debugfs_init - create root directory for debugfs entries
+ */
+void ice_debugfs_init(void)
+{
+ ice_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+ if (IS_ERR(ice_debugfs_root))
+ pr_info("init of debugfs failed\n");
+}
+
+/**
+ * ice_debugfs_exit - remove debugfs entries
+ */
+void ice_debugfs_exit(void)
+{
+ debugfs_remove_recursive(ice_debugfs_root);
+ ice_debugfs_root = NULL;
+}
diff --git a/drivers/net/ethernet/intel/ice/ice_devlink.c b/drivers/net/ethernet/intel/ice/ice_devlink.c
index 923556e6ae79..148902b515bf 100644
--- a/drivers/net/ethernet/intel/ice/ice_devlink.c
+++ b/drivers/net/ethernet/intel/ice/ice_devlink.c
@@ -1739,26 +1739,6 @@ void ice_devlink_register(struct ice_pf *pf)
*/
void ice_devlink_unregister(struct ice_pf *pf)
{
- struct ice_hw *hw = &pf->hw;
-
- /* make sure FW logging is disabled to not put the FW in a weird state
- * for the next driver load
- */
- if (hw->fwlog_ena) {
- int status;
-
- hw->fwlog_cfg.options &= ~ICE_FWLOG_OPTION_ARQ_ENA;
- status = ice_fwlog_set(hw, &hw->fwlog_cfg);
- if (status)
- dev_warn(ice_pf_to_dev(pf), "Unable to turn off FW logging, status: %d\n",
- status);
-
- status = ice_fwlog_unregister(hw);
- if (status)
- dev_warn(ice_pf_to_dev(pf), "Unable to unregister FW logging, status: %d\n",
- status);
- }
-
devlink_unregister(priv_to_devlink(pf));
}
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 517702af327c..01cf4cb78009 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1213,6 +1213,45 @@ ice_handle_link_event(struct ice_pf *pf, struct ice_rq_event_info *event)
return status;
}
+/**
+ * ice_get_fwlog_data - copy the FW log data from ARQ event
+ * @pf: PF that the FW log event is associated with
+ * @event: event structure containing FW log data
+ */
+static void
+ice_get_fwlog_data(struct ice_pf *pf, struct ice_rq_event_info *event)
+{
+ struct device *dev = ice_pf_to_dev(pf);
+ struct ice_fwlog_data *fwlog;
+
+ if (pf->fwlog_list_count >= ICE_FWLOG_MAX_SIZE) {
+ dev_info(dev, "Reached max list size for fwlog list!\n");
+ return;
+ }
+
+ fwlog = kzalloc(sizeof(*fwlog), GFP_KERNEL);
+ if (!fwlog) {
+ dev_warn(dev, "Couldn't allocate memory for FWlog element\n");
+ return;
+ }
+
+ INIT_LIST_HEAD(&fwlog->list);
+
+ fwlog->data_size = le16_to_cpu(event->desc.datalen);
+ fwlog->data = kzalloc(fwlog->data_size, GFP_KERNEL);
+ if (!fwlog->data) {
+ dev_warn(dev, "Couldn't allocate memory for FWlog data\n");
+ kfree(fwlog);
+ return;
+ }
+
+ memcpy(fwlog->data, event->msg_buf, fwlog->data_size);
+
+ list_add_tail(&fwlog->list, &pf->fwlog_data_list);
+
+ pf->fwlog_list_count++;
+}
+
enum ice_aq_task_state {
ICE_AQ_TASK_WAITING = 0,
ICE_AQ_TASK_COMPLETE,
@@ -1486,6 +1525,9 @@ static int __ice_clean_ctrlq(struct ice_pf *pf, enum ice_ctl_q q_type)
if (!ice_is_malicious_vf(pf, &event, i, pending))
ice_vc_process_vf_msg(pf, &event);
break;
+ case ice_aqc_opc_fw_logs_event:
+ ice_get_fwlog_data(pf, &event);
+ break;
case ice_aqc_opc_lldp_set_mib_change:
ice_dcb_process_lldp_set_mib_change(pf, &event);
break;
@@ -4688,6 +4730,52 @@ static int ice_register_netdev(struct ice_pf *pf)
return err;
}
+/**
+ * ice_pf_fwlog_init - initialize FW logging on device init
+ * @pf: pointer to the PF struct
+ *
+ * This should always be called after ice_hw_init().
+ */
+static void
+ice_pf_fwlog_init(struct ice_pf *pf)
+{
+ INIT_LIST_HEAD(&pf->fwlog_data_list);
+}
+
+/**
+ * ice_pf_fwlog_deinit - clear FW logging metadata on device exit
+ * @pf: pointer to the PF struct
+ */
+static void
+ice_pf_fwlog_deinit(struct ice_pf *pf)
+{
+ struct ice_fwlog_data *fwlog, *fwlog_tmp;
+ struct ice_hw *hw = &pf->hw;
+
+ /* make sure FW logging is disabled to not put the FW in a weird state
+ * for the next driver load
+ */
+ if (hw->fwlog_ena) {
+ int status;
+
+ hw->fwlog_cfg.options &= ~ICE_FWLOG_OPTION_ARQ_ENA;
+ status = ice_fwlog_set(hw, &hw->fwlog_cfg);
+ if (status)
+ dev_warn(ice_pf_to_dev(pf), "Unable to turn off FW logging, status: %d\n",
+ status);
+
+ status = ice_fwlog_unregister(hw);
+ if (status)
+ dev_warn(ice_pf_to_dev(pf), "Unable to unregister FW logging, status: %d\n",
+ status);
+ }
+
+ list_for_each_entry_safe(fwlog, fwlog_tmp, &pf->fwlog_data_list, list) {
+ kfree(fwlog->data);
+ kfree(fwlog);
+ }
+}
+
/**
* ice_probe - Device initialization routine
* @pdev: PCI device information struct
@@ -4773,8 +4861,12 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
goto err_exit_unroll;
}
+ ice_pf_fwlog_init(pf);
+
ice_init_feature_support(pf);
+ ice_debugfs_fwlog_init(pf);
+
err = ice_init_ddp_config(hw, pf);
/* during topology change ice_init_hw may fail */
@@ -5139,6 +5231,8 @@ static void ice_remove(struct pci_dev *pdev)
msleep(100);
}
+ ice_pf_fwlog_deinit(pf);
+
ice_tc_indir_block_remove(pf);
if (test_bit(ICE_FLAG_SRIOV_ENA, pf->flags)) {
@@ -5620,10 +5714,13 @@ static int __init ice_module_init(void)
return -ENOMEM;
}
+ ice_debugfs_init();
+
status = pci_register_driver(&ice_driver);
if (status) {
pr_err("failed to register PCI driver, err %d\n", status);
destroy_workqueue(ice_wq);
+ ice_debugfs_exit();
}
return status;
@@ -5640,6 +5737,7 @@ static void __exit ice_module_exit(void)
{
pci_unregister_driver(&ice_driver);
destroy_workqueue(ice_wq);
+ ice_debugfs_exit();
pr_info("module unloaded\n");
}
module_exit(ice_module_exit);
--
2.35.1
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
next prev parent reply other threads:[~2022-11-28 21:48 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-28 21:47 [Intel-wired-lan] [PATCH net-next 0/5] add v2 FW logging for ice driver Paul M Stillwell Jr
2022-11-28 21:47 ` [Intel-wired-lan] [PATCH net-next 1/5] ice: remove FW logging code Paul M Stillwell Jr
2022-11-28 21:47 ` [Intel-wired-lan] [PATCH net-next 2/5] ice: enable devlink to check FW logging status Paul M Stillwell Jr
2022-12-01 0:39 ` Tony Nguyen
2022-11-28 21:47 ` [Intel-wired-lan] [PATCH net-next 3/5] ice: add ability to query/set FW log level and resolution Paul M Stillwell Jr
2022-11-29 11:48 ` Wilczynski, Michal
2022-11-29 13:30 ` Alexander Lobakin
2022-11-29 21:31 ` Paul M Stillwell Jr
2022-12-01 0:39 ` Tony Nguyen
2022-12-09 0:00 ` Paul M Stillwell Jr
2022-12-01 7:36 ` Paul Menzel
2022-11-28 21:47 ` [Intel-wired-lan] [PATCH net-next 4/5] ice: disable FW logging on driver unload Paul M Stillwell Jr
2022-11-29 12:05 ` Wilczynski, Michal
2022-11-29 21:31 ` Paul M Stillwell Jr
2022-12-01 0:40 ` Tony Nguyen
2022-11-28 21:47 ` Paul M Stillwell Jr [this message]
2022-11-29 13:53 ` [Intel-wired-lan] [PATCH net-next 5/5] ice: use debugfs to output FW log data Paul Menzel
2022-11-29 21:28 ` Paul M Stillwell Jr
2022-12-01 0:40 ` Tony Nguyen
2022-12-09 18:32 ` Paul M Stillwell Jr
2022-12-01 0:39 ` [Intel-wired-lan] [PATCH net-next 0/5] add v2 FW logging for ice driver Tony Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221128214749.110-6-paul.m.stillwell.jr@intel.com \
--to=paul.m.stillwell.jr@intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox