From: Michal Wajdeczko <michal.wajdeczko@intel.com>
To: intel-xe@lists.freedesktop.org
Subject: [PATCH 6/9] drm/xe/vf: Don't support gtidle if VF
Date: Wed, 19 Jun 2024 23:45:54 +0200 [thread overview]
Message-ID: <20240619214557.905-7-michal.wajdeczko@intel.com> (raw)
In-Reply-To: <20240619214557.905-1-michal.wajdeczko@intel.com>
VF drivers can't access any of gtidle control registers as this
functionality is owned by the PF driver.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
---
drivers/gpu/drm/xe/xe_gt_idle.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/gpu/drm/xe/xe_gt_idle.c b/drivers/gpu/drm/xe/xe_gt_idle.c
index 5d6181117ab2..67aba4140510 100644
--- a/drivers/gpu/drm/xe/xe_gt_idle.c
+++ b/drivers/gpu/drm/xe/xe_gt_idle.c
@@ -15,6 +15,7 @@
#include "xe_macros.h"
#include "xe_mmio.h"
#include "xe_pm.h"
+#include "xe_sriov.h"
/**
* DOC: Xe GT Idle
@@ -100,6 +101,9 @@ void xe_gt_idle_enable_pg(struct xe_gt *gt)
u32 pg_enable;
int i, j;
+ if (IS_SRIOV_VF(xe))
+ return;
+
/* Disable CPG for PVC */
if (xe->info.platform == XE_PVC)
return;
@@ -130,6 +134,9 @@ void xe_gt_idle_enable_pg(struct xe_gt *gt)
void xe_gt_idle_disable_pg(struct xe_gt *gt)
{
+ if (IS_SRIOV_VF(gt_to_xe(gt)))
+ return;
+
xe_device_assert_mem_access(gt_to_xe(gt));
XE_WARN_ON(xe_force_wake_get(gt_to_fw(gt), XE_FW_GT));
@@ -214,6 +221,9 @@ int xe_gt_idle_init(struct xe_gt_idle *gtidle)
struct kobject *kobj;
int err;
+ if (IS_SRIOV_VF(xe))
+ return 0;
+
kobj = kobject_create_and_add("gtidle", gt->sysfs);
if (!kobj)
return -ENOMEM;
@@ -246,6 +256,9 @@ void xe_gt_idle_enable_c6(struct xe_gt *gt)
xe_device_assert_mem_access(gt_to_xe(gt));
xe_force_wake_assert_held(gt_to_fw(gt), XE_FW_GT);
+ if (IS_SRIOV_VF(gt_to_xe(gt)))
+ return;
+
/* Units of 1280 ns for a total of 5s */
xe_mmio_write32(gt, RC_IDLE_HYSTERSIS, 0x3B9ACA);
/* Enable RC6 */
@@ -258,6 +271,9 @@ void xe_gt_idle_disable_c6(struct xe_gt *gt)
xe_device_assert_mem_access(gt_to_xe(gt));
xe_force_wake_assert_held(gt_to_fw(gt), XE_FW_GT);
+ if (IS_SRIOV_VF(gt_to_xe(gt)))
+ return;
+
xe_mmio_write32(gt, RC_CONTROL, 0);
xe_mmio_write32(gt, RC_STATE, 0);
}
--
2.43.0
next prev parent reply other threads:[~2024-06-19 21:46 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-19 21:45 [PATCH 0/9] Adapt the driver to boot on the VF device Michal Wajdeczko
2024-06-19 21:45 ` [PATCH 1/9] drm/xe/vf: Disable features that do not apply to VFs Michal Wajdeczko
2024-06-20 9:17 ` Piotr Piórkowski
2024-06-20 10:05 ` Michal Wajdeczko
2024-06-20 10:01 ` [PATCH v2 " Michal Wajdeczko
2024-06-20 10:06 ` Piotr Piórkowski
2024-06-19 21:45 ` [PATCH 2/9] drm/xe/vf: Don't run any save-restore RTP actions if VF Michal Wajdeczko
2024-06-20 9:20 ` Piotr Piórkowski
2024-06-20 17:30 ` Matt Roper
2024-06-19 21:45 ` [PATCH 3/9] drm/xe/vf: Don't apply tile workarounds " Michal Wajdeczko
2024-06-20 9:21 ` Piotr Piórkowski
2024-06-20 17:31 ` Matt Roper
2024-06-19 21:45 ` [PATCH 4/9] drm/xe/vf: Don't change hwe IRQ masks if using memory IRQs Michal Wajdeczko
2024-06-20 9:29 ` Piotr Piórkowski
2024-06-19 21:45 ` [PATCH 5/9] drm/xe/vf: Don't initialize OA if VF Michal Wajdeczko
2024-06-19 21:56 ` Dixit, Ashutosh
2024-06-19 22:10 ` Dixit, Ashutosh
2024-06-19 22:40 ` Michal Wajdeczko
2024-06-19 22:57 ` Dixit, Ashutosh
2024-06-19 23:01 ` Michal Wajdeczko
2024-06-19 21:45 ` Michal Wajdeczko [this message]
2024-06-20 9:38 ` [PATCH 6/9] drm/xe/vf: Don't support gtidle " Piotr Piórkowski
2024-06-19 21:45 ` [PATCH 7/9] drm/xe/vf: Don't use register based TLB invalidation " Michal Wajdeczko
2024-06-19 23:13 ` Matthew Brost
2024-06-19 23:25 ` Michal Wajdeczko
2024-06-20 10:07 ` Piotr Piórkowski
2024-06-19 21:45 ` [PATCH 8/9] drm/xe/vf: Skip engine ring enabling " Michal Wajdeczko
2024-06-20 10:03 ` Piotr Piórkowski
2024-06-19 21:45 ` [PATCH 9/9] drm/xe/vf: Custom HuC initialization " Michal Wajdeczko
2024-06-19 23:11 ` Matthew Brost
2024-06-19 23:14 ` Michal Wajdeczko
2024-06-19 23:23 ` Matthew Brost
2024-06-19 23:34 ` Michal Wajdeczko
2024-06-20 1:59 ` Matthew Brost
2024-06-19 21:51 ` ✓ CI.Patch_applied: success for Adapt the driver to boot on the VF device Patchwork
2024-06-19 21:51 ` ✓ CI.checkpatch: " Patchwork
2024-06-19 21:52 ` ✓ CI.KUnit: " Patchwork
2024-06-19 22:04 ` ✓ CI.Build: " Patchwork
2024-06-19 22:06 ` ✗ CI.Hooks: failure " Patchwork
2024-06-19 22:07 ` ✓ CI.checksparse: success " Patchwork
2024-06-19 22:22 ` ✗ CI.BAT: failure " Patchwork
2024-06-20 6:28 ` Michal Wajdeczko
2024-06-20 6:16 ` ✗ CI.FULL: " Patchwork
2024-06-20 6:28 ` ✓ CI.Patch_applied: success for Adapt the driver to boot on the VF device (rev2) Patchwork
2024-06-20 6:28 ` ✓ CI.checkpatch: " Patchwork
2024-06-20 6:29 ` ✓ CI.KUnit: " Patchwork
2024-06-20 6:41 ` ✓ CI.Build: " Patchwork
2024-06-20 6:43 ` ✗ CI.Hooks: failure " Patchwork
2024-06-20 6:44 ` ✓ CI.checksparse: success " Patchwork
2024-06-20 7:01 ` ✓ CI.BAT: " Patchwork
2024-06-20 8:32 ` ✗ CI.FULL: failure " Patchwork
2024-06-20 10:09 ` ✓ CI.Patch_applied: success for Adapt the driver to boot on the VF device (rev3) Patchwork
2024-06-20 10:09 ` ✓ CI.checkpatch: " Patchwork
2024-06-20 10:10 ` ✓ CI.KUnit: " Patchwork
2024-06-20 10:22 ` ✓ CI.Build: " Patchwork
2024-06-20 10:24 ` ✗ CI.Hooks: failure " Patchwork
2024-06-20 10:26 ` ✓ CI.checksparse: success " Patchwork
2024-06-20 10:52 ` ✗ CI.BAT: failure " Patchwork
2024-06-20 14:29 ` Michal Wajdeczko
2024-06-20 13:01 ` ✗ CI.FULL: " Patchwork
2024-06-20 14:32 ` Michal Wajdeczko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240619214557.905-7-michal.wajdeczko@intel.com \
--to=michal.wajdeczko@intel.com \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox