From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: Imre Deak <imre.deak@gmail.com>
Subject: [PATCH 11/17] drm/i915/ddi: Sanitize DDI_BUF_CTL register definitions
Date: Wed, 29 Jan 2025 22:02:15 +0200 [thread overview]
Message-ID: <20250129200221.2508101-12-imre.deak@intel.com> (raw)
In-Reply-To: <20250129200221.2508101-1-imre.deak@intel.com>
From: Imre Deak <imre.deak@gmail.com>
Align the DDI_BUF_CTL register flag definitions with how this is done
elsewhere.
Signed-off-by: Imre Deak <imre.deak@gmail.com>
---
drivers/gpu/drm/i915/i915_reg.h | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7fe4e71fc08ec..5cee6a96270af 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3621,27 +3621,29 @@ enum skl_power_gate {
#define _DDI_BUF_CTL_B 0x64100
/* Known as DDI_CTL_DE in MTL+ */
#define DDI_BUF_CTL(port) _MMIO_PORT(port, _DDI_BUF_CTL_A, _DDI_BUF_CTL_B)
-#define DDI_BUF_CTL_ENABLE (1 << 31)
+#define DDI_BUF_CTL_ENABLE REG_BIT(31)
#define XE2LPD_DDI_BUF_D2D_LINK_ENABLE REG_BIT(29)
#define XE2LPD_DDI_BUF_D2D_LINK_STATE REG_BIT(28)
-#define DDI_BUF_TRANS_SELECT(n) ((n) << 24)
-#define DDI_BUF_EMP_MASK (0xf << 24)
-#define DDI_BUF_PHY_LINK_RATE(r) ((r) << 20)
+#define DDI_BUF_EMP_MASK REG_GENMASK(27, 24)
+#define DDI_BUF_TRANS_SELECT(n) REG_FIELD_PREP(DDI_BUF_EMP_MASK, n)
+#define DDI_BUF_PHY_LINK_RATE_MASK REG_GENMASK(23, 20)
+#define DDI_BUF_PHY_LINK_RATE(r) REG_FIELD_PREP(DDI_BUF_PHY_LINK_RATE_MASK, r)
#define DDI_BUF_PORT_DATA_MASK REG_GENMASK(19, 18)
#define DDI_BUF_PORT_DATA_10BIT REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 0)
#define DDI_BUF_PORT_DATA_20BIT REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 1)
#define DDI_BUF_PORT_DATA_40BIT REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 2)
-#define DDI_BUF_PORT_REVERSAL (1 << 16)
+#define DDI_BUF_PORT_REVERSAL REG_BIT(16)
#define DDI_BUF_LANE_STAGGER_DELAY_MASK REG_GENMASK(15, 8)
#define DDI_BUF_LANE_STAGGER_DELAY(symbols) REG_FIELD_PREP(DDI_BUF_LANE_STAGGER_DELAY_MASK, \
symbols)
-#define DDI_BUF_IS_IDLE (1 << 7)
+#define DDI_BUF_IS_IDLE REG_BIT(7)
#define DDI_BUF_CTL_TC_PHY_OWNERSHIP REG_BIT(6)
-#define DDI_A_4_LANES (1 << 4)
-#define DDI_PORT_WIDTH(width) (((width) == 3 ? 4 : ((width) - 1)) << 1)
-#define DDI_PORT_WIDTH_MASK (7 << 1)
+#define DDI_A_4_LANES REG_BIT(4)
+#define DDI_PORT_WIDTH_MASK REG_GENMASK(3, 1)
+#define DDI_PORT_WIDTH(width) REG_FIELD_PREP(DDI_PORT_WIDTH_MASK, \
+ (width) == 3 ? 4 : (width) - 1)
#define DDI_PORT_WIDTH_SHIFT 1
-#define DDI_INIT_DISPLAY_DETECTED (1 << 0)
+#define DDI_INIT_DISPLAY_DETECTED REG_BIT(0)
/* DDI Buffer Translations */
#define _DDI_BUF_TRANS_A 0x64E00
--
2.44.2
next prev parent reply other threads:[~2025-01-29 20:01 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-29 20:02 [PATCH 00/17] drm/i915/ddi: Fix/simplify port enabling/disabling Imre Deak
2025-01-29 20:02 ` [PATCH 01/17] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro Imre Deak
2025-01-30 11:47 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 02/17] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL Imre Deak
2025-01-30 11:51 ` Jani Nikula
2025-01-30 13:33 ` Imre Deak
2025-01-29 20:02 ` [PATCH 03/17] drm/i915/ddi: Make all the PORT_WIDTH macros work the same way Imre Deak
2025-01-30 11:52 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 04/17] drm/i915/ddi: Set missing TC DP PHY lane stagger delay in DDI_BUF_CTL Imre Deak
2025-02-05 12:22 ` Jani Nikula
2025-02-05 13:20 ` Imre Deak
2025-01-29 20:02 ` [PATCH 05/17] drm/i915/ddi: Simplify the port enabling via DDI_BUF_CTL Imre Deak
2025-01-30 11:55 ` Jani Nikula
2025-01-30 13:34 ` Imre Deak
2025-01-29 20:02 ` [PATCH 06/17] drm/i915/ddi: Simplify the port disabling " Imre Deak
2025-02-05 12:24 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 07/17] drm/i915/ddi: Simplify waiting for a port to idle " Imre Deak
2025-02-05 12:35 ` Jani Nikula
2025-02-05 12:47 ` Imre Deak
2025-02-05 13:02 ` Jani Nikula
2025-02-12 11:48 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 08/17] drm/i915/ddi: Move platform checks within mtl_ddi_enable/disable_d2d_link() Imre Deak
2025-02-05 12:42 ` Jani Nikula
2025-02-05 13:46 ` Imre Deak
2025-01-29 20:02 ` [PATCH 09/17] drm/i915/ddi: Unify the platform specific functions disabling a port Imre Deak
2025-02-05 12:45 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 10/17] drm/i915/ddi: Add a helper to enable " Imre Deak
2025-02-05 12:49 ` Jani Nikula
2025-02-05 14:43 ` Imre Deak
2025-01-29 20:02 ` Imre Deak [this message]
2025-02-05 12:52 ` [PATCH 11/17] drm/i915/ddi: Sanitize DDI_BUF_CTL register definitions Jani Nikula
2025-02-05 14:52 ` Imre Deak
2025-01-29 20:02 ` [PATCH 12/17] drm/i915/ddi: Configure/enable a port in DDI_BUF_CTL via read-modify-write Imre Deak
2025-02-10 18:13 ` Jani Nikula
2025-02-10 18:25 ` Imre Deak
2025-02-12 11:51 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 13/17] drm/i915/ddi: Factor out a helper to get DDI_BUF_CTL's config value Imre Deak
2025-02-10 18:06 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 14/17] drm/i915/ddi: Reuse helper to compute the HDMI DDI_BUF_CTL config Imre Deak
2025-02-11 14:06 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 15/17] drm/i915/ddi: Reuse helper to compute the HDMI PORT_BUF_CTL1 config Imre Deak
2025-02-12 9:51 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 16/17] drm/i915/ddi: Move platform/encoder checks within adlp_tbt_to_dp_alt_switch_wa() Imre Deak
2025-02-12 11:06 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 17/17] drm/i915/ddi: Unify the platform specific functions enabling a port Imre Deak
2025-02-12 11:26 ` Kahola, Mika
2025-01-29 22:16 ` ✓ CI.Patch_applied: success for drm/i915/ddi: Fix/simplify port enabling/disabling Patchwork
2025-01-29 22:17 ` ✗ CI.checkpatch: warning " Patchwork
2025-01-29 22:18 ` ✓ CI.KUnit: success " Patchwork
2025-01-29 22:34 ` ✓ CI.Build: " Patchwork
2025-01-29 22:37 ` ✓ CI.Hooks: " Patchwork
2025-01-29 22:38 ` ✗ CI.checksparse: warning " Patchwork
2025-01-30 6:22 ` ✓ Xe.CI.BAT: success " Patchwork
2025-01-30 8:27 ` ✗ Xe.CI.Full: failure " Patchwork
2025-01-31 7:42 ` Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250129200221.2508101-12-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=imre.deak@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox