From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Subject: [PATCH 14/17] drm/i915/ddi: Reuse helper to compute the HDMI DDI_BUF_CTL config
Date: Wed, 29 Jan 2025 22:02:18 +0200 [thread overview]
Message-ID: <20250129200221.2508101-15-imre.deak@intel.com> (raw)
In-Reply-To: <20250129200221.2508101-1-imre.deak@intel.com>
Reuse the existing helper to compute the configuration value of the
DDI_BUF_CTL register for HDMI outputs instead of open-coding this.
Note that dropping the XE2LPD_DDI_BUF_D2D_LINK_ENABLE flag is ok,
since an earlier mtl_ddi_enable_d2d() has set it already and
intel_enable_ddi_buf()'s RMW will not update this flag.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 30 ++++++++----------------
1 file changed, 10 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index dd8ae5cf96c70..e03ec9a235d33 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -339,11 +339,14 @@ static u32 intel_ddi_buf_ctl_config_val(struct intel_encoder *encoder,
struct intel_display *display = to_intel_display(encoder);
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+ bool is_dp = intel_crtc_has_dp_encoder(crtc_state);
u32 val = 0;
/* DDI_BUF_CTL_ENABLE will be set by intel_ddi_prepare_link_retrain() later */
- val |= DDI_PORT_WIDTH(crtc_state->lane_count) |
- DDI_BUF_TRANS_SELECT(0);
+ if (is_dp || DISPLAY_VER(display) >= 14)
+ val |= DDI_PORT_WIDTH(crtc_state->lane_count);
+
+ val |= DDI_BUF_TRANS_SELECT(0);
if (dig_port->lane_reversal)
val |= DDI_BUF_PORT_REVERSAL;
@@ -351,14 +354,15 @@ static u32 intel_ddi_buf_ctl_config_val(struct intel_encoder *encoder,
val |= DDI_A_4_LANES;
if (DISPLAY_VER(i915) >= 14) {
- if (intel_dp_is_uhbr(crtc_state))
+ if (is_dp && intel_dp_is_uhbr(crtc_state))
val |= DDI_BUF_PORT_DATA_40BIT;
else
val |= DDI_BUF_PORT_DATA_10BIT;
}
if (IS_ALDERLAKE_P(i915) && intel_encoder_is_tc(encoder)) {
- val |= ddi_buf_phy_link_rate(crtc_state->port_clock);
+ if (is_dp)
+ val |= ddi_buf_phy_link_rate(crtc_state->port_clock);
/*
* TODO: remove the following once DDI_BUF_CTL is updated via
* an RMW everywhere.
@@ -367,7 +371,7 @@ static u32 intel_ddi_buf_ctl_config_val(struct intel_encoder *encoder,
val |= DDI_BUF_CTL_TC_PHY_OWNERSHIP;
}
- if (IS_DISPLAY_VER(display, 11, 13) && intel_encoder_is_tc(encoder)) {
+ if (is_dp && IS_DISPLAY_VER(display, 11, 13) && intel_encoder_is_tc(encoder)) {
int delay = dp_phy_lane_stagger_delay(crtc_state->port_clock);
val |= DDI_BUF_LANE_STAGGER_DELAY(delay);
@@ -3417,7 +3421,6 @@ static void intel_ddi_enable_hdmi(struct intel_atomic_state *state,
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
struct drm_connector *connector = conn_state->connector;
enum port port = encoder->port;
- u32 buf_ctl = 0;
if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
crtc_state->hdmi_high_tmds_clock_ratio,
@@ -3482,11 +3485,6 @@ static void intel_ddi_enable_hdmi(struct intel_atomic_state *state,
* is filled with lane count, already set in the crtc_state.
* The same is required to be filled in PORT_BUF_CTL for C10/20 Phy.
*/
- if (dig_port->lane_reversal)
- buf_ctl |= DDI_BUF_PORT_REVERSAL;
- if (dig_port->ddi_a_4_lanes)
- buf_ctl |= DDI_A_4_LANES;
-
if (DISPLAY_VER(dev_priv) >= 14) {
u32 port_buf = 0;
@@ -3497,17 +3495,9 @@ static void intel_ddi_enable_hdmi(struct intel_atomic_state *state,
intel_de_rmw(dev_priv, XELPDP_PORT_BUF_CTL1(dev_priv, port),
XELPDP_PORT_WIDTH_MASK | XELPDP_PORT_REVERSAL, port_buf);
-
- buf_ctl |= DDI_PORT_WIDTH(crtc_state->lane_count);
-
- if (DISPLAY_VER(dev_priv) >= 20)
- buf_ctl |= XE2LPD_DDI_BUF_D2D_LINK_ENABLE;
- } else if (IS_ALDERLAKE_P(dev_priv) && intel_encoder_is_tc(encoder)) {
- drm_WARN_ON(&dev_priv->drm, !intel_tc_port_in_legacy_mode(dig_port));
- buf_ctl |= DDI_BUF_CTL_TC_PHY_OWNERSHIP;
}
- intel_enable_ddi_buf(encoder, buf_ctl);
+ intel_enable_ddi_buf(encoder, intel_ddi_buf_ctl_config_val(encoder, crtc_state));
}
static void intel_ddi_enable(struct intel_atomic_state *state,
--
2.44.2
next prev parent reply other threads:[~2025-01-29 20:02 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-29 20:02 [PATCH 00/17] drm/i915/ddi: Fix/simplify port enabling/disabling Imre Deak
2025-01-29 20:02 ` [PATCH 01/17] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro Imre Deak
2025-01-30 11:47 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 02/17] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL Imre Deak
2025-01-30 11:51 ` Jani Nikula
2025-01-30 13:33 ` Imre Deak
2025-01-29 20:02 ` [PATCH 03/17] drm/i915/ddi: Make all the PORT_WIDTH macros work the same way Imre Deak
2025-01-30 11:52 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 04/17] drm/i915/ddi: Set missing TC DP PHY lane stagger delay in DDI_BUF_CTL Imre Deak
2025-02-05 12:22 ` Jani Nikula
2025-02-05 13:20 ` Imre Deak
2025-01-29 20:02 ` [PATCH 05/17] drm/i915/ddi: Simplify the port enabling via DDI_BUF_CTL Imre Deak
2025-01-30 11:55 ` Jani Nikula
2025-01-30 13:34 ` Imre Deak
2025-01-29 20:02 ` [PATCH 06/17] drm/i915/ddi: Simplify the port disabling " Imre Deak
2025-02-05 12:24 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 07/17] drm/i915/ddi: Simplify waiting for a port to idle " Imre Deak
2025-02-05 12:35 ` Jani Nikula
2025-02-05 12:47 ` Imre Deak
2025-02-05 13:02 ` Jani Nikula
2025-02-12 11:48 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 08/17] drm/i915/ddi: Move platform checks within mtl_ddi_enable/disable_d2d_link() Imre Deak
2025-02-05 12:42 ` Jani Nikula
2025-02-05 13:46 ` Imre Deak
2025-01-29 20:02 ` [PATCH 09/17] drm/i915/ddi: Unify the platform specific functions disabling a port Imre Deak
2025-02-05 12:45 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 10/17] drm/i915/ddi: Add a helper to enable " Imre Deak
2025-02-05 12:49 ` Jani Nikula
2025-02-05 14:43 ` Imre Deak
2025-01-29 20:02 ` [PATCH 11/17] drm/i915/ddi: Sanitize DDI_BUF_CTL register definitions Imre Deak
2025-02-05 12:52 ` Jani Nikula
2025-02-05 14:52 ` Imre Deak
2025-01-29 20:02 ` [PATCH 12/17] drm/i915/ddi: Configure/enable a port in DDI_BUF_CTL via read-modify-write Imre Deak
2025-02-10 18:13 ` Jani Nikula
2025-02-10 18:25 ` Imre Deak
2025-02-12 11:51 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 13/17] drm/i915/ddi: Factor out a helper to get DDI_BUF_CTL's config value Imre Deak
2025-02-10 18:06 ` Jani Nikula
2025-01-29 20:02 ` Imre Deak [this message]
2025-02-11 14:06 ` [PATCH 14/17] drm/i915/ddi: Reuse helper to compute the HDMI DDI_BUF_CTL config Kahola, Mika
2025-01-29 20:02 ` [PATCH 15/17] drm/i915/ddi: Reuse helper to compute the HDMI PORT_BUF_CTL1 config Imre Deak
2025-02-12 9:51 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 16/17] drm/i915/ddi: Move platform/encoder checks within adlp_tbt_to_dp_alt_switch_wa() Imre Deak
2025-02-12 11:06 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 17/17] drm/i915/ddi: Unify the platform specific functions enabling a port Imre Deak
2025-02-12 11:26 ` Kahola, Mika
2025-01-29 22:16 ` ✓ CI.Patch_applied: success for drm/i915/ddi: Fix/simplify port enabling/disabling Patchwork
2025-01-29 22:17 ` ✗ CI.checkpatch: warning " Patchwork
2025-01-29 22:18 ` ✓ CI.KUnit: success " Patchwork
2025-01-29 22:34 ` ✓ CI.Build: " Patchwork
2025-01-29 22:37 ` ✓ CI.Hooks: " Patchwork
2025-01-29 22:38 ` ✗ CI.checksparse: warning " Patchwork
2025-01-30 6:22 ` ✓ Xe.CI.BAT: success " Patchwork
2025-01-30 8:27 ` ✗ Xe.CI.Full: failure " Patchwork
2025-01-31 7:42 ` Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250129200221.2508101-15-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox