From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Subject: [PATCH 08/17] drm/i915/ddi: Move platform checks within mtl_ddi_enable/disable_d2d_link()
Date: Wed, 29 Jan 2025 22:02:12 +0200 [thread overview]
Message-ID: <20250129200221.2508101-9-imre.deak@intel.com> (raw)
In-Reply-To: <20250129200221.2508101-1-imre.deak@intel.com>
The prefix of the mtl_ddi_enable_d2d() / mtl_ddi_disable_d2d_link()
names show already what are the relevant platforms, so the corresponding
platform check is a detail that can be hidden in the functions, do so.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index d040558b5d029..07188606a0177 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -2545,6 +2545,9 @@ mtl_ddi_enable_d2d(struct intel_encoder *encoder)
i915_reg_t reg;
u32 set_bits, wait_bits;
+ if (DISPLAY_VER(dev_priv) < 14)
+ return;
+
if (DISPLAY_VER(dev_priv) >= 20) {
reg = DDI_BUF_CTL(port);
set_bits = XE2LPD_DDI_BUF_D2D_LINK_ENABLE;
@@ -3035,6 +3038,9 @@ mtl_ddi_disable_d2d_link(struct intel_encoder *encoder)
i915_reg_t reg;
u32 clr_bits, wait_bits;
+ if (DISPLAY_VER(dev_priv) < 14)
+ return;
+
if (DISPLAY_VER(dev_priv) >= 20) {
reg = DDI_BUF_CTL(port);
clr_bits = XE2LPD_DDI_BUF_D2D_LINK_ENABLE;
@@ -3411,8 +3417,7 @@ static void intel_ddi_enable_hdmi(struct intel_atomic_state *state,
hsw_prepare_hdmi_ddi_buffers(encoder, crtc_state);
/* e. Enable D2D Link for C10/C20 Phy */
- if (DISPLAY_VER(dev_priv) >= 14)
- mtl_ddi_enable_d2d(encoder);
+ mtl_ddi_enable_d2d(encoder);
encoder->set_signal_levels(encoder, crtc_state);
--
2.44.2
next prev parent reply other threads:[~2025-01-29 20:01 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-29 20:02 [PATCH 00/17] drm/i915/ddi: Fix/simplify port enabling/disabling Imre Deak
2025-01-29 20:02 ` [PATCH 01/17] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro Imre Deak
2025-01-30 11:47 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 02/17] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL Imre Deak
2025-01-30 11:51 ` Jani Nikula
2025-01-30 13:33 ` Imre Deak
2025-01-29 20:02 ` [PATCH 03/17] drm/i915/ddi: Make all the PORT_WIDTH macros work the same way Imre Deak
2025-01-30 11:52 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 04/17] drm/i915/ddi: Set missing TC DP PHY lane stagger delay in DDI_BUF_CTL Imre Deak
2025-02-05 12:22 ` Jani Nikula
2025-02-05 13:20 ` Imre Deak
2025-01-29 20:02 ` [PATCH 05/17] drm/i915/ddi: Simplify the port enabling via DDI_BUF_CTL Imre Deak
2025-01-30 11:55 ` Jani Nikula
2025-01-30 13:34 ` Imre Deak
2025-01-29 20:02 ` [PATCH 06/17] drm/i915/ddi: Simplify the port disabling " Imre Deak
2025-02-05 12:24 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 07/17] drm/i915/ddi: Simplify waiting for a port to idle " Imre Deak
2025-02-05 12:35 ` Jani Nikula
2025-02-05 12:47 ` Imre Deak
2025-02-05 13:02 ` Jani Nikula
2025-02-12 11:48 ` Kahola, Mika
2025-01-29 20:02 ` Imre Deak [this message]
2025-02-05 12:42 ` [PATCH 08/17] drm/i915/ddi: Move platform checks within mtl_ddi_enable/disable_d2d_link() Jani Nikula
2025-02-05 13:46 ` Imre Deak
2025-01-29 20:02 ` [PATCH 09/17] drm/i915/ddi: Unify the platform specific functions disabling a port Imre Deak
2025-02-05 12:45 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 10/17] drm/i915/ddi: Add a helper to enable " Imre Deak
2025-02-05 12:49 ` Jani Nikula
2025-02-05 14:43 ` Imre Deak
2025-01-29 20:02 ` [PATCH 11/17] drm/i915/ddi: Sanitize DDI_BUF_CTL register definitions Imre Deak
2025-02-05 12:52 ` Jani Nikula
2025-02-05 14:52 ` Imre Deak
2025-01-29 20:02 ` [PATCH 12/17] drm/i915/ddi: Configure/enable a port in DDI_BUF_CTL via read-modify-write Imre Deak
2025-02-10 18:13 ` Jani Nikula
2025-02-10 18:25 ` Imre Deak
2025-02-12 11:51 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 13/17] drm/i915/ddi: Factor out a helper to get DDI_BUF_CTL's config value Imre Deak
2025-02-10 18:06 ` Jani Nikula
2025-01-29 20:02 ` [PATCH 14/17] drm/i915/ddi: Reuse helper to compute the HDMI DDI_BUF_CTL config Imre Deak
2025-02-11 14:06 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 15/17] drm/i915/ddi: Reuse helper to compute the HDMI PORT_BUF_CTL1 config Imre Deak
2025-02-12 9:51 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 16/17] drm/i915/ddi: Move platform/encoder checks within adlp_tbt_to_dp_alt_switch_wa() Imre Deak
2025-02-12 11:06 ` Kahola, Mika
2025-01-29 20:02 ` [PATCH 17/17] drm/i915/ddi: Unify the platform specific functions enabling a port Imre Deak
2025-02-12 11:26 ` Kahola, Mika
2025-01-29 22:16 ` ✓ CI.Patch_applied: success for drm/i915/ddi: Fix/simplify port enabling/disabling Patchwork
2025-01-29 22:17 ` ✗ CI.checkpatch: warning " Patchwork
2025-01-29 22:18 ` ✓ CI.KUnit: success " Patchwork
2025-01-29 22:34 ` ✓ CI.Build: " Patchwork
2025-01-29 22:37 ` ✓ CI.Hooks: " Patchwork
2025-01-29 22:38 ` ✗ CI.checksparse: warning " Patchwork
2025-01-30 6:22 ` ✓ Xe.CI.BAT: success " Patchwork
2025-01-30 8:27 ` ✗ Xe.CI.Full: failure " Patchwork
2025-01-31 7:42 ` Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250129200221.2508101-9-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox