From: Matthew Brost <matthew.brost@intel.com>
To: intel-xe@lists.freedesktop.org
Subject: [PATCH v2 00/34] VF migration redesign
Date: Tue, 23 Sep 2025 18:15:27 -0700 [thread overview]
Message-ID: <20250924011601.888293-1-matthew.brost@intel.com> (raw)
Rather than modifying buffers in place using GGTT addresses during VF
migration, this approach relies on the submission backend's stop/start
mechanism to issue fixups. The patch titled "Document GuC Submission
Backend" provides a detailed explanation of the design.
Testing was performed using an out-of-tree PF/VFIO driver with manual
triggering of VF migration while IGT test cases are running.
IGT test cases:
- A new series [1] that exercises active contexts, job resubmission, and
compressd memory.
- A new test [2] that actively creates / destroys queue on each
submission
- xe_exec_threads basic sections, which test context registration loss,
schedule enable loss, and job resubmission.
- xe_exec_threads balancer sections, which follow the same flows as the
basic sections but include a work queue (GGTT address shift).
- xe_exec_threads compute mode user pointer invalidation sections, which
exercise the same flow as the basic sections, plus replaying
suspend/resume flows.
All code paths in "Replay GuC submission state on pause/unpause" that
replay state have been manually verified via debug messages "Add debug
prints for GuC replaying state during VF recovery".
v2:
- Fix lockdep splat
- Fix checkpatch
- Fix PTL issue with LRC W/A buffer
- Fix race creating / destroying queues across migration exposed by [2]
- Include a version of Satya's patches in [3] which enable CCS save /
restore across VF migration /w GGTT shift
Matt
[1] https://patchwork.freedesktop.org/series/154616/
[2] https://patchwork.freedesktop.org/series/154931/
[3] https://patchwork.freedesktop.org/series/154682/
Matthew Brost (31):
Revert "drm/xe/vf: Rebase exec queue parallel commands during
migration recovery"
Revert "drm/xe/vf: Post migration, repopulate ring area for pending
request"
Revert "drm/xe/vf: Fixup CTB send buffer messages after migration"
drm/xe: Save off position in ring in which a job was programmed
drm/xe/guc: Track pending-enable source in submission state
drm/xe: Track LR jobs in DRM scheduler pending list
drm/xe: Don't change LRC ring head on job resubmission
drm/xe: Make LRC W/A scratch buffer usage consistent
drm/xe/guc: Document GuC submission backend
drm/xe/vf: Add xe_gt_sriov_vf_recovery_inprogress helper
drm/xe/vf: Make VF recovery run on per-GT worker
drm/xe/vf: Abort H2G sends during VF post-migration recovery
drm/xe/vf: Remove memory allocations from VF post migration recovery
drm/xe/vf: Close multi-GT GGTT shift race
drm/xe/vf: Teardown VF post migration worker on driver unload
drm/xe/vf: Don't allow GT reset to be queued during VF post migration
recovery
drm/xe/vf: Wakeup in GuC backend on VF post migration recovery
drm/xe/vf: Extra debug on GGTT shift
drm/xe/vf: Use GUC_HXG_TYPE_EVENT for GuC context register
drm/xe/vf: Stop and flush CTs in VF post migration recovery
drm/xe/vf: Reset TLB invalidations during VF post migration recovery
drm/xe/vf: Kickstart after resfix in VF post migration recovery
drm/xe/vf: Start CTs before resfix VF post migration recovery
drm/xe/vf: Abort VF post migration recovery on failure
drm/xe/vf: Replay GuC submission state on pause / unpause
drm/xe: Move queue init before LRC creation
drm/xe/vf: Add debug prints for GuC replaying state during VF recovery
drm/xe/vf: Workaround for race condition in GuC firmware during VF
pause
drm/xe/vf: Use primary GT ordered work queue on media GT on PTL VF
drm/xe/vf: Ensure media GT VF recovery runs after primary GT on PTL
drm/xe/vf: Rebase CCS save/restore BB GGTT addresses
Satyanarayana K V P (2):
drm/xe: Use PPGTT addresses for TLB invalidation to avoid GGTT fixups
drm/xe/guc: Increase wait timeout to 2sec after BUSY reply from GuC
Tomasz Lis (1):
drm/xe/vf: Lock querying GGTT config during driver init
Documentation/gpu/xe/index.rst | 1 +
drivers/gpu/drm/xe/abi/guc_actions_abi.h | 8 -
drivers/gpu/drm/xe/xe_device_types.h | 2 +
drivers/gpu/drm/xe/xe_exec.c | 12 +-
drivers/gpu/drm/xe/xe_exec_queue.c | 86 +-
drivers/gpu/drm/xe/xe_exec_queue.h | 5 +-
drivers/gpu/drm/xe/xe_execlist.c | 2 +-
drivers/gpu/drm/xe/xe_gpu_scheduler.c | 14 +
drivers/gpu/drm/xe/xe_gpu_scheduler.h | 2 +
drivers/gpu/drm/xe/xe_gt.c | 25 +-
drivers/gpu/drm/xe/xe_gt.h | 2 +-
drivers/gpu/drm/xe/xe_gt_sriov_vf.c | 417 ++++++++--
drivers/gpu/drm/xe/xe_gt_sriov_vf.h | 10 +-
drivers/gpu/drm/xe/xe_gt_sriov_vf_types.h | 36 +-
drivers/gpu/drm/xe/xe_guc.c | 4 +-
drivers/gpu/drm/xe/xe_guc_ct.c | 284 ++-----
drivers/gpu/drm/xe/xe_guc_ct.h | 4 +-
drivers/gpu/drm/xe/xe_guc_exec_queue_types.h | 15 +
drivers/gpu/drm/xe/xe_guc_submit.c | 790 +++++++++++++++----
drivers/gpu/drm/xe/xe_guc_submit.h | 7 +-
drivers/gpu/drm/xe/xe_lrc.c | 2 +-
drivers/gpu/drm/xe/xe_lrc.h | 10 +
drivers/gpu/drm/xe/xe_map.h | 18 -
drivers/gpu/drm/xe/xe_memirq.c | 48 +-
drivers/gpu/drm/xe/xe_memirq.h | 3 +
drivers/gpu/drm/xe/xe_migrate.c | 28 +-
drivers/gpu/drm/xe/xe_pci.c | 6 +-
drivers/gpu/drm/xe/xe_pci_types.h | 1 +
drivers/gpu/drm/xe/xe_ring_ops.c | 23 +-
drivers/gpu/drm/xe/xe_sched_job_types.h | 9 +
drivers/gpu/drm/xe/xe_sriov.c | 8 +-
drivers/gpu/drm/xe/xe_sriov_vf.c | 243 +-----
drivers/gpu/drm/xe/xe_sriov_vf.h | 3 +-
drivers/gpu/drm/xe/xe_sriov_vf_ccs.c | 24 +
drivers/gpu/drm/xe/xe_sriov_vf_ccs.h | 1 +
drivers/gpu/drm/xe/xe_sriov_vf_types.h | 4 -
drivers/gpu/drm/xe/xe_tile.c | 2 +-
drivers/gpu/drm/xe/xe_tile_sriov_vf.c | 6 +-
drivers/gpu/drm/xe/xe_tile_sriov_vf.h | 1 -
39 files changed, 1369 insertions(+), 797 deletions(-)
--
2.34.1
next reply other threads:[~2025-09-24 1:16 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-24 1:15 Matthew Brost [this message]
2025-09-24 1:15 ` [PATCH v2 01/34] drm/xe/vf: Lock querying GGTT config during driver init Matthew Brost
2025-09-24 9:29 ` Michal Wajdeczko
2025-09-24 20:23 ` Matthew Brost
2025-09-30 0:42 ` Lis, Tomasz
2025-09-24 1:15 ` [PATCH v2 02/34] Revert "drm/xe/vf: Rebase exec queue parallel commands during migration recovery" Matthew Brost
2025-09-24 9:32 ` Michal Wajdeczko
2025-09-24 20:17 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 03/34] Revert "drm/xe/vf: Post migration, repopulate ring area for pending request" Matthew Brost
2025-09-24 1:15 ` [PATCH v2 04/34] Revert "drm/xe/vf: Fixup CTB send buffer messages after migration" Matthew Brost
2025-09-24 1:15 ` [PATCH v2 05/34] drm/xe: Save off position in ring in which a job was programmed Matthew Brost
2025-09-24 1:15 ` [PATCH v2 06/34] drm/xe/guc: Track pending-enable source in submission state Matthew Brost
2025-09-24 1:15 ` [PATCH v2 07/34] drm/xe: Track LR jobs in DRM scheduler pending list Matthew Brost
2025-09-24 1:15 ` [PATCH v2 08/34] drm/xe: Don't change LRC ring head on job resubmission Matthew Brost
2025-09-24 15:14 ` Lis, Tomasz
2025-09-25 16:12 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 09/34] drm/xe: Make LRC W/A scratch buffer usage consistent Matthew Brost
2025-09-24 14:23 ` Lis, Tomasz
2025-09-24 18:01 ` Lucas De Marchi
2025-09-25 20:25 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 10/34] drm/xe/guc: Document GuC submission backend Matthew Brost
2025-09-24 9:35 ` Michal Wajdeczko
2025-09-24 20:20 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 11/34] drm/xe/vf: Add xe_gt_sriov_vf_recovery_inprogress helper Matthew Brost
2025-09-24 10:14 ` Michal Wajdeczko
2025-09-24 19:39 ` Matthew Brost
2025-09-24 20:12 ` Michal Wajdeczko
2025-09-24 20:30 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 12/34] drm/xe/vf: Make VF recovery run on per-GT worker Matthew Brost
2025-09-24 10:49 ` Michal Wajdeczko
2025-09-24 19:50 ` Matthew Brost
2025-09-24 20:21 ` Michal Wajdeczko
2025-09-24 20:35 ` Matthew Brost
2025-09-25 16:27 ` Lis, Tomasz
2025-09-25 16:56 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 13/34] drm/xe/vf: Abort H2G sends during VF post-migration recovery Matthew Brost
2025-09-24 11:00 ` Michal Wajdeczko
2025-09-24 20:01 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 14/34] drm/xe/vf: Remove memory allocations from VF post migration recovery Matthew Brost
2025-09-26 1:35 ` Lis, Tomasz
2025-09-26 1:43 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 15/34] drm/xe/vf: Close multi-GT GGTT shift race Matthew Brost
2025-09-26 2:33 ` Lis, Tomasz
2025-09-26 19:09 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 16/34] drm/xe/vf: Teardown VF post migration worker on driver unload Matthew Brost
2025-09-26 15:40 ` Lis, Tomasz
2025-09-26 19:13 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 17/34] drm/xe/vf: Don't allow GT reset to be queued during VF post migration recovery Matthew Brost
2025-09-27 2:59 ` Lis, Tomasz
2025-09-27 22:33 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 18/34] drm/xe/vf: Wakeup in GuC backend on " Matthew Brost
2025-09-25 19:06 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 19/34] drm/xe/vf: Extra debug on GGTT shift Matthew Brost
2025-09-27 3:16 ` Lis, Tomasz
2025-09-27 11:06 ` Michal Wajdeczko
2025-09-27 22:56 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 20/34] drm/xe/vf: Use GUC_HXG_TYPE_EVENT for GuC context register Matthew Brost
2025-09-24 11:15 ` Michal Wajdeczko
2025-09-24 20:16 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 21/34] drm/xe/vf: Stop and flush CTs in VF post migration recovery Matthew Brost
2025-09-24 11:21 ` Michal Wajdeczko
2025-09-24 20:12 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 22/34] drm/xe/vf: Reset TLB invalidations during " Matthew Brost
2025-09-27 3:43 ` Lis, Tomasz
2025-09-27 22:29 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 23/34] drm/xe/vf: Kickstart after resfix in " Matthew Brost
2025-09-27 11:21 ` Lis, Tomasz
2025-09-24 1:15 ` [PATCH v2 24/34] drm/xe/vf: Start CTs before resfix " Matthew Brost
2025-09-24 11:50 ` Michal Wajdeczko
2025-09-24 20:10 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 25/34] drm/xe/vf: Abort VF post migration recovery on failure Matthew Brost
2025-09-27 11:54 ` Lis, Tomasz
2025-09-27 22:38 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 26/34] drm/xe/vf: Replay GuC submission state on pause / unpause Matthew Brost
2025-09-27 13:33 ` Lis, Tomasz
2025-09-27 23:11 ` Matthew Brost
2025-09-24 1:15 ` [PATCH v2 27/34] drm/xe: Move queue init before LRC creation Matthew Brost
2025-09-24 1:15 ` [PATCH v2 28/34] drm/xe/vf: Add debug prints for GuC replaying state during VF recovery Matthew Brost
2025-09-24 1:15 ` [PATCH v2 29/34] drm/xe/vf: Workaround for race condition in GuC firmware during VF pause Matthew Brost
2025-09-24 1:15 ` [PATCH v2 30/34] drm/xe: Use PPGTT addresses for TLB invalidation to avoid GGTT fixups Matthew Brost
2025-09-24 1:15 ` [PATCH v2 31/34] drm/xe/vf: Use primary GT ordered work queue on media GT on PTL VF Matthew Brost
2025-09-24 1:15 ` [PATCH v2 32/34] drm/xe/vf: Ensure media GT VF recovery runs after primary GT on PTL Matthew Brost
2025-09-24 1:16 ` [PATCH v2 33/34] drm/xe/vf: Rebase CCS save/restore BB GGTT addresses Matthew Brost
2025-09-24 4:04 ` K V P, Satyanarayana
2025-09-24 6:32 ` Matthew Brost
2025-09-24 6:36 ` K V P, Satyanarayana
2025-09-24 1:16 ` [PATCH v2 34/34] drm/xe/guc: Increase wait timeout to 2sec after BUSY reply from GuC Matthew Brost
2025-09-24 1:29 ` ✓ CI.KUnit: success for VF migration redesign (rev2) Patchwork
2025-09-24 2:14 ` ✗ Xe.CI.BAT: failure " Patchwork
2025-09-24 7:37 ` ✗ Xe.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250924011601.888293-1-matthew.brost@intel.com \
--to=matthew.brost@intel.com \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox