From: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
To: intel-xe@lists.freedesktop.org
Subject: [CI 09/14] drm/xe: Flush GGTT writes after populating DPT
Date: Wed, 22 Oct 2025 08:32:34 +0100 [thread overview]
Message-ID: <20251022073241.71401-10-tvrtko.ursulin@igalia.com> (raw)
In-Reply-To: <20251022073241.71401-1-tvrtko.ursulin@igalia.com>
When DPT is placed in stolen it is populated using ioremap_wc() via GGTT.
I915 has established that on modern platforms a small flush and delay is
required for those writes to reliably land so lets add the same logic
(simplified by removing impossible platforms) to xe as well.
v2:
* Do it only for system memory buffers.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/xe/display/xe_fb_pin.c | 45 ++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/drivers/gpu/drm/xe/display/xe_fb_pin.c b/drivers/gpu/drm/xe/display/xe_fb_pin.c
index b18d15cc3c53..eb21eeae9d17 100644
--- a/drivers/gpu/drm/xe/display/xe_fb_pin.c
+++ b/drivers/gpu/drm/xe/display/xe_fb_pin.c
@@ -12,9 +12,11 @@
#include "intel_fb.h"
#include "intel_fb_pin.h"
#include "intel_fbdev.h"
+#include "regs/xe_engine_regs.h"
#include "xe_bo.h"
#include "xe_device.h"
#include "xe_ggtt.h"
+#include "xe_mmio.h"
#include "xe_pm.h"
#include "xe_vram_types.h"
@@ -79,6 +81,46 @@ write_dpt_remapped(struct xe_bo *bo, struct iosys_map *map, u32 *dpt_ofs,
*dpt_ofs = ALIGN(*dpt_ofs, 4096);
}
+static void gt_flush_ggtt_writes(struct xe_gt *gt)
+{
+ if (!gt)
+ return;
+
+ xe_mmio_read32(>->mmio, RING_TAIL(RENDER_RING_BASE));
+}
+
+static void ggtt_flush_writes(struct xe_ggtt *ggtt)
+{
+ struct xe_device *xe = tile_to_xe(ggtt->tile);
+
+ /*
+ * No actual flushing is required for the GTT write domain for reads
+ * from the GTT domain. Writes to it "immediately" go to main memory
+ * as far as we know, so there's no chipset flush. It also doesn't
+ * land in the GPU render cache.
+ *
+ * However, we do have to enforce the order so that all writes through
+ * the GTT land before any writes to the device, such as updates to
+ * the GATT itself.
+ *
+ * We also have to wait a bit for the writes to land from the GTT.
+ * An uncached read (i.e. mmio) seems to be ideal for the round-trip
+ * timing. This issue has only been observed when switching quickly
+ * between GTT writes and CPU reads from inside the kernel on recent hw,
+ * and it appears to only affect discrete GTT blocks (i.e. on LLC
+ * system agents we cannot reproduce this behaviour, until Cannonlake
+ * that was!).
+ */
+
+ wmb();
+
+ if (xe_pm_runtime_get_if_active(xe)) {
+ gt_flush_ggtt_writes(ggtt->tile->primary_gt);
+ gt_flush_ggtt_writes(ggtt->tile->media_gt);
+ xe_pm_runtime_put(xe);
+ }
+}
+
static int __xe_pin_fb_vma_dpt(const struct intel_framebuffer *fb,
const struct i915_gtt_view *view,
struct i915_vma *vma,
@@ -162,6 +204,9 @@ static int __xe_pin_fb_vma_dpt(const struct intel_framebuffer *fb,
rot_info->plane[i].dst_stride);
}
+ if (dpt->vmap.is_iomem && !xe_bo_is_vram(dpt))
+ ggtt_flush_writes(tile0->mem.ggtt);
+
vma->dpt = dpt;
vma->node = dpt->ggtt_node[tile0->id];
--
2.48.0
next prev parent reply other threads:[~2025-10-22 7:32 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-22 7:32 [CI 00/14] auxccs ci run no stolen with flush Tvrtko Ursulin
2025-10-22 7:32 ` [CI 01/14] drm/xe: Fix ggtt fb alignment Tvrtko Ursulin
2025-10-22 7:32 ` [CI 02/14] drm/xe/xelpg: Flush CCS when flushing caches Tvrtko Ursulin
2025-10-22 7:32 ` [CI 03/14] drm/xe/xelp: Quiesce memory traffic before invalidating AuxCCS Tvrtko Ursulin
2025-10-22 7:32 ` [CI 04/14] drm/xe/xelp: Support auxccs invalidation on blitter Tvrtko Ursulin
2025-10-22 7:32 ` [CI 05/14] drm/xe/xelp: Use MI_FLUSH_DW_CCS on auxccs platforms Tvrtko Ursulin
2025-10-22 7:32 ` [CI 06/14] drm/xe/xelp: Wait for AuxCCS invalidation to complete Tvrtko Ursulin
2025-10-22 7:32 ` [CI 07/14] drm/xe: Export xe_emit_aux_table_inv Tvrtko Ursulin
2025-10-22 7:32 ` [CI 08/14] drm/xe/xelp: Add AuxCCS invalidation to the indirect context workarounds Tvrtko Ursulin
2025-10-22 7:32 ` Tvrtko Ursulin [this message]
2025-10-22 7:32 ` [CI 10/14] drm/xe: Handle DPT in system memory Tvrtko Ursulin
2025-10-22 7:32 ` [CI 11/14] drm/xe: Do not use stolen memory for DPT on IGFX and AuxCCS Tvrtko Ursulin
2025-10-22 7:32 ` [CI 12/14] drm/xe: Force flush system memory AuxCCS framebuffers before scan out Tvrtko Ursulin
2025-10-22 7:32 ` [CI 13/14] drm/xe/display: Add support for AuxCCS Tvrtko Ursulin
2025-10-22 7:32 ` [CI 14/14] drm/i915/display: Expose AuxCCS frame buffer modifiers for Xe Tvrtko Ursulin
2025-10-22 8:53 ` ✗ CI.checkpatch: warning for auxccs ci run no stolen with flush Patchwork
2025-10-22 8:54 ` ✓ CI.KUnit: success " Patchwork
2025-10-22 9:36 ` ✓ Xe.CI.BAT: " Patchwork
2025-10-22 11:39 ` ✗ Xe.CI.Full: failure " Patchwork
2025-10-22 17:16 ` ✗ CI.checkpatch: warning for auxccs ci run no stolen with flush (rev2) Patchwork
2025-10-22 17:17 ` ✓ CI.KUnit: success " Patchwork
2025-10-22 17:55 ` ✓ Xe.CI.BAT: " Patchwork
2025-10-22 20:47 ` ✗ Xe.CI.Full: failure " Patchwork
2025-10-23 9:31 ` ✗ CI.checkpatch: warning for auxccs ci run no stolen with flush (rev3) Patchwork
2025-10-23 9:32 ` ✓ CI.KUnit: success " Patchwork
2025-10-23 10:42 ` ✓ Xe.CI.BAT: " Patchwork
2025-10-23 16:11 ` ✗ Xe.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251022073241.71401-10-tvrtko.ursulin@igalia.com \
--to=tvrtko.ursulin@igalia.com \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox