[PATCH v2 02/26] drm/i915/cx0: Change register bit naming for powerdown values

[Suraj Kandpal <suraj.kandpal@intel.com>]

Change the register bit naming for powerdown values from CX0 to
XELPDP so that it can be used with LT Phy too.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
---
 drivers/gpu/drm/i915/display/intel_cx0_phy.c      | 14 +++++++-------
 drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h | 10 +++++-----
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
index a74c1be225ac..0b02163b545a 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
@@ -2861,11 +2861,11 @@ static void intel_cx0_setup_powerdown(struct intel_encoder *encoder)
 
 	intel_de_rmw(display, XELPDP_PORT_BUF_CTL2(display, port),
 		     XELPDP_POWER_STATE_READY_MASK,
-		     XELPDP_POWER_STATE_READY(CX0_P2_STATE_READY));
+		     XELPDP_POWER_STATE_READY(XELPDP_P2_STATE_READY));
 	intel_de_rmw(display, XELPDP_PORT_BUF_CTL3(display, port),
 		     XELPDP_POWER_STATE_ACTIVE_MASK |
 		     XELPDP_PLL_LANE_STAGGERING_DELAY_MASK,
-		     XELPDP_POWER_STATE_ACTIVE(CX0_P0_STATE_ACTIVE) |
+		     XELPDP_POWER_STATE_ACTIVE(XELPDP_P0_STATE_ACTIVE) |
 		     XELPDP_PLL_LANE_STAGGERING_DELAY(0));
 }
 
@@ -2938,7 +2938,7 @@ static void intel_cx0_phy_lane_reset(struct intel_encoder *encoder,
 			 phy_name(phy), XELPDP_REFCLK_ENABLE_TIMEOUT_US);
 
 	intel_cx0_powerdown_change_sequence(encoder, INTEL_CX0_BOTH_LANES,
-					    CX0_P2_STATE_RESET);
+					    XELPDP_P2_STATE_RESET);
 	intel_cx0_setup_powerdown(encoder);
 
 	intel_de_rmw(display, XELPDP_PORT_BUF_CTL2(display, port), lane_pipe_reset, 0);
@@ -3043,7 +3043,7 @@ static void __intel_cx0pll_enable(struct intel_encoder *encoder,
 	 * TODO: For DP alt mode use only one lane.
 	 */
 	intel_cx0_powerdown_change_sequence(encoder, INTEL_CX0_BOTH_LANES,
-					    CX0_P2_STATE_READY);
+					    XELPDP_P2_STATE_READY);
 
 	/*
 	 * 4. Program PORT_MSGBUS_TIMER register's Message Bus Timer field to 0xA000.
@@ -3284,13 +3284,13 @@ static u8 cx0_power_control_disable_val(struct intel_encoder *encoder)
 	struct intel_display *display = to_intel_display(encoder);
 
 	if (intel_encoder_is_c10phy(encoder))
-		return CX0_P2PG_STATE_DISABLE;
+		return XELPDP_P2PG_STATE_DISABLE;
 
 	if ((display->platform.battlemage && encoder->port == PORT_A) ||
 	    (DISPLAY_VER(display) >= 30 && encoder->type == INTEL_OUTPUT_EDP))
-		return CX0_P2PG_STATE_DISABLE;
+		return XELPDP_P2PG_STATE_DISABLE;
 
-	return CX0_P4PG_STATE_DISABLE;
+	return XELPDP_P4PG_STATE_DISABLE;
 }
 
 static void intel_cx0pll_disable(struct intel_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
index 86e2e1c7babf..cd941f16529c 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
@@ -149,11 +149,11 @@
 #define   XELPDP_PLL_LANE_STAGGERING_DELAY(val)		REG_FIELD_PREP(XELPDP_PLL_LANE_STAGGERING_DELAY_MASK, val)
 #define   XELPDP_POWER_STATE_ACTIVE_MASK		REG_GENMASK(3, 0)
 #define   XELPDP_POWER_STATE_ACTIVE(val)		REG_FIELD_PREP(XELPDP_POWER_STATE_ACTIVE_MASK, val)
-#define   CX0_P0_STATE_ACTIVE				0x0
-#define   CX0_P2_STATE_READY				0x2
-#define   CX0_P2PG_STATE_DISABLE			0x9
-#define   CX0_P4PG_STATE_DISABLE			0xC
-#define   CX0_P2_STATE_RESET				0x2
+#define   XELPDP_P0_STATE_ACTIVE			0x0
+#define   XELPDP_P2_STATE_READY				0x2
+#define   XELPDP_P2PG_STATE_DISABLE			0x9
+#define   XELPDP_P4PG_STATE_DISABLE			0xC
+#define   XELPDP_P2_STATE_RESET				0x2
 
 #define _XELPDP_PORT_MSGBUS_TIMER_LN0_A			0x640d8
 #define _XELPDP_PORT_MSGBUS_TIMER_LN0_B			0x641d8
-- 
2.34.1