Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Suraj Kandpal <suraj.kandpal@intel.com>
To: intel-xe@lists.freedesktop.org, intel-gfx@lists.freedesktop.org
Cc: ankit.k.nautiyal@intel.com, arun.r.murthy@intel.com,
	uma.shankar@intel.com, gustavo.sousa@intel.com,
	lucas.demarchi@intel.com, Suraj Kandpal <suraj.kandpal@intel.com>
Subject: [PATCH v2 04/26] drm/i915/cx0: Move the HDMI FRL function to intel_hdmi
Date: Fri, 24 Oct 2025 15:36:50 +0530	[thread overview]
Message-ID: <20251024100712.3776261-5-suraj.kandpal@intel.com> (raw)
In-Reply-To: <20251024100712.3776261-1-suraj.kandpal@intel.com>

Move the is_hdmi_frl to intel_hdmi.c. Rename it appropriately and
make it non static.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_cx0_phy.c | 21 +++-----------------
 drivers/gpu/drm/i915/display/intel_hdmi.c    | 14 +++++++++++++
 drivers/gpu/drm/i915/display/intel_hdmi.h    |  1 +
 3 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
index c99e0885e737..6991707abdc7 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
@@ -2590,20 +2590,6 @@ static bool is_dp2(u32 clock)
 	return false;
 }
 
-static bool is_hdmi_frl(u32 clock)
-{
-	switch (clock) {
-	case 300000: /* 3 Gbps */
-	case 600000: /* 6 Gbps */
-	case 800000: /* 8 Gbps */
-	case 1000000: /* 10 Gbps */
-	case 1200000: /* 12 Gbps */
-		return true;
-	default:
-		return false;
-	}
-}
-
 static bool intel_c20_protocol_switch_valid(struct intel_encoder *encoder)
 {
 	struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
@@ -2617,7 +2603,7 @@ static int intel_get_c20_custom_width(u32 clock, bool dp)
 {
 	if (dp && is_dp2(clock))
 		return 2;
-	else if (is_hdmi_frl(clock))
+	else if (intel_hdmi_is_frl(clock))
 		return 1;
 	else
 		return 0;
@@ -2706,11 +2692,10 @@ static void intel_c20_pll_program(struct intel_display *display,
 
 	/* 5. For DP or 6. For HDMI */
 	serdes = 0;
-
 	if (is_dp)
 		serdes = PHY_C20_IS_DP |
 			 PHY_C20_DP_RATE(intel_c20_get_dp_rate(port_clock));
-	else if (is_hdmi_frl(port_clock))
+	else if (intel_hdmi_is_frl(port_clock))
 		serdes = PHY_C20_IS_HDMI_FRL;
 
 	intel_cx0_rmw(encoder, owned_lane_mask, PHY_C20_VDR_CUSTOM_SERDES_RATE,
@@ -2777,7 +2762,7 @@ static void intel_program_port_clock_ctl(struct intel_encoder *encoder,
 
 	val |= XELPDP_FORWARD_CLOCK_UNGATE;
 
-	if (!is_dp && is_hdmi_frl(port_clock))
+	if (!is_dp && intel_hdmi_is_frl(port_clock))
 		val |= XELPDP_DDI_CLOCK_SELECT_PREP(display, XELPDP_DDI_CLOCK_SELECT_DIV18CLK);
 	else
 		val |= XELPDP_DDI_CLOCK_SELECT_PREP(display, XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 4ab7e2e3bfd4..e81c3e5aa250 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -68,6 +68,20 @@
 #include "intel_snps_phy.h"
 #include "intel_vrr.h"
 
+bool intel_hdmi_is_frl(u32 clock)
+{
+	switch (clock) {
+	case 300000: /* 3 Gbps */
+	case 600000: /* 6 Gbps */
+	case 800000: /* 8 Gbps */
+	case 1000000: /* 10 Gbps */
+	case 1200000: /* 12 Gbps */
+		return true;
+	default:
+		return false;
+	}
+}
+
 static void
 assert_hdmi_port_disabled(struct intel_hdmi *intel_hdmi)
 {
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.h b/drivers/gpu/drm/i915/display/intel_hdmi.h
index dec2ad7dd8a2..be2fad57e4ad 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.h
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.h
@@ -60,6 +60,7 @@ int intel_hdmi_dsc_get_num_slices(const struct intel_crtc_state *crtc_state,
 				  int src_max_slices, int src_max_slice_width,
 				  int hdmi_max_slices, int hdmi_throughput);
 int intel_hdmi_dsc_get_slice_height(int vactive);
+bool intel_hdmi_is_frl(u32 clock);
 
 void hsw_write_infoframe(struct intel_encoder *encoder,
 			 const struct intel_crtc_state *crtc_state,
-- 
2.34.1


  parent reply	other threads:[~2025-10-24 10:07 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-24 10:06 [PATCH v2 00/26] Enable LT PHY Suraj Kandpal
2025-10-24 10:06 ` [PATCH v2 01/26] drm/i915/ltphy: Add LT Phy related VDR and Pipe Registers Suraj Kandpal
2025-10-24 10:06 ` [PATCH v2 02/26] drm/i915/cx0: Change register bit naming for powerdown values Suraj Kandpal
2025-10-24 10:06 ` [PATCH v2 03/26] drm/i915/ltphy: Phy lane reset for LT Phy Suraj Kandpal
2025-10-28  7:47   ` Murthy, Arun R
2025-10-24 10:06 ` Suraj Kandpal [this message]
2025-10-28  7:48   ` [PATCH v2 04/26] drm/i915/cx0: Move the HDMI FRL function to intel_hdmi Murthy, Arun R
2025-10-24 10:06 ` [PATCH v2 05/26] drm/i915/ltphy: Program sequence for PORT_CLOCK_CTL for LT Phy Suraj Kandpal
2025-10-28  7:51   ` Murthy, Arun R
2025-10-24 10:06 ` [PATCH v2 06/26] drm/i915/ltphy: Add a wrapper for LT Phy powerdown change sequence Suraj Kandpal
2025-10-24 10:06 ` [PATCH v2 07/26] drm/i915/ltphy: Read PHY_VDR_0_CONFIG register Suraj Kandpal
2025-10-28  9:17   ` Jani Nikula
2025-10-24 10:06 ` [PATCH v2 08/26] drm/i915/ltphy: Add LT Phy Programming recipe tables Suraj Kandpal
2025-10-24 10:06 ` [PATCH v2 09/26] drm/i915/ltphy: Program the VDR PLL registers for LT PHY Suraj Kandpal
2025-10-24 10:06 ` [PATCH v2 10/26] drm/i915/ltphy: Update the ltpll config table value for eDP Suraj Kandpal
2025-10-24 10:06 ` [PATCH v2 11/26] drm/i915/ltphy: Enable SSC during port clock programming Suraj Kandpal
2025-10-24 10:06 ` [PATCH v2 12/26] drm/i915/ltphy: Add function to calculate LT PHY port clock Suraj Kandpal
2025-10-31  5:15   ` Nautiyal, Ankit K
2025-10-24 10:06 ` [PATCH v2 13/26] drm/i915/ltphy: Program the P2P Transaction flow for LT Phy Suraj Kandpal
2025-10-28  7:55   ` Murthy, Arun R
2025-10-24 10:07 ` [PATCH v2 14/26] drm/i915/ltphy: Program the rest of the PORT_CLOCK_CTL steps Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 15/26] drm/i915/ltphy: Program the rest of the LT Phy Enable sequence Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 16/26] drm/i915/ltphy: Program LT Phy Non-TBT PLL disable sequence Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 17/26] drm/i915/ltphy: Hook up LT Phy Enable & Disable sequences Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 18/26] drm/i915/ddi: Define LT Phy Swing tables Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 19/26] drm/i915/ltphy: Program LT Phy Voltage Swing Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 20/26] drm/i915/ltphy: Enable/Disable Tx after Non TBT Enable sequence Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 21/26] drm/i915/ltphy: Define the LT Phy state compare function Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 22/26] drm/i915/ltphy: Define function to readout LT Phy PLL state Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 23/26] drm/i915/ltphy: Define LT PHY PLL state verify function Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 24/26] drm/i915/display: Aux Enable and Display powerwell timeouts Suraj Kandpal
2025-10-28  7:58   ` Murthy, Arun R
2025-10-24 10:07 ` [PATCH v2 25/26] drm/i915/ltphy: Modify the step that need to be skipped Suraj Kandpal
2025-10-24 10:07 ` [PATCH v2 26/26] drm/i915/ltphy: Implement HDMI Algo for Pll state Suraj Kandpal
2025-10-31  6:24   ` Nautiyal, Ankit K
2025-10-24 10:27 ` ✗ CI.checkpatch: warning for Enable LT PHY (rev2) Patchwork
2025-10-24 10:28 ` ✓ CI.KUnit: success " Patchwork
2025-10-24 10:43 ` ✗ CI.checksparse: warning " Patchwork
2025-10-24 11:20 ` ✓ Xe.CI.BAT: success " Patchwork
2025-10-24 21:07 ` ✗ Xe.CI.Full: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251024100712.3776261-5-suraj.kandpal@intel.com \
    --to=suraj.kandpal@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=arun.r.murthy@intel.com \
    --cc=gustavo.sousa@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=lucas.demarchi@intel.com \
    --cc=uma.shankar@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox