[PATCH v2 04/15] drm/xe/xe3p_lpg: Add new PAT table

[Gustavo Sousa <gustavo.sousa@intel.com>]

From: Matt Roper <matthew.d.roper@intel.com>

PAT programming for Xe3p_LPG is more similar to Xe2 and Xe3 than it is
to Xe3p_XPC.  Compared to Xe2/Xe3 we have:

* There's a slight update to the PAT table, where two new indices (18
  and 19) are added to expose a new "WB - Transient App" L3 caching
  mode.

* The PTA_MODE entry must be programmed differently according to the
  media type, and both differ from Xe2.

There are no changes to the underlying registers, so the Xe2 ops can be
re-used for Xe3p.

Bspec: 71582, 74160
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
---
 drivers/gpu/drm/xe/xe_pat.c | 55 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/xe/xe_pat.c b/drivers/gpu/drm/xe/xe_pat.c
index 5ba650948a4a..f840d9a58740 100644
--- a/drivers/gpu/drm/xe/xe_pat.c
+++ b/drivers/gpu/drm/xe/xe_pat.c
@@ -124,7 +124,8 @@ static const struct xe_pat_table_entry xelpg_pat_table[] = {
  *   - no_promote:  0=promotable, 1=no promote
  *   - comp_en:     0=disable, 1=enable
  *   - l3clos:      L3 class of service (0-3)
- *   - l3_policy:   0=WB, 1=XD ("WB - Transient Display"), 3=UC
+ *   - l3_policy:   0=WB, 1=XD ("WB - Transient Display"),
+ *                  2=XA ("WB - Transient App" for Xe3p), 3=UC
  *   - l4_policy:   0=WB, 1=WT, 3=UC
  *   - coh_mode:    0=no snoop, 2=1-way coherent, 3=2-way coherent
  *
@@ -253,6 +254,44 @@ static const struct xe_pat_table_entry xe3p_xpc_pat_table[] = {
 	[31] = XE3P_XPC_PAT( 0, 3, 0, 0, 3 ),
 };
 
+static const struct xe_pat_table_entry xe3p_primary_pat_pta = XE2_PAT(0, 0, 0, 0, 0, 3);
+static const struct xe_pat_table_entry xe3p_media_pat_pta = XE2_PAT(0, 0, 0, 0, 0, 2);
+
+static const struct xe_pat_table_entry xe3p_lpg_pat_table[] = {
+	[ 0] = XE2_PAT( 0, 0, 0, 0, 3, 0 ),
+	[ 1] = XE2_PAT( 0, 0, 0, 0, 3, 2 ),
+	[ 2] = XE2_PAT( 0, 0, 0, 0, 3, 3 ),
+	[ 3] = XE2_PAT( 0, 0, 0, 3, 3, 0 ),
+	[ 4] = XE2_PAT( 0, 0, 0, 3, 0, 2 ),
+	[ 5] = XE2_PAT( 0, 0, 0, 3, 3, 2 ),
+	[ 6] = XE2_PAT( 1, 0, 0, 1, 3, 0 ),
+	[ 7] = XE2_PAT( 0, 0, 0, 3, 0, 3 ),
+	[ 8] = XE2_PAT( 0, 0, 0, 3, 0, 0 ),
+	[ 9] = XE2_PAT( 0, 1, 0, 0, 3, 0 ),
+	[10] = XE2_PAT( 0, 1, 0, 3, 0, 0 ),
+	[11] = XE2_PAT( 1, 1, 0, 1, 3, 0 ),
+	[12] = XE2_PAT( 0, 1, 0, 3, 3, 0 ),
+	[13] = XE2_PAT( 0, 0, 0, 0, 0, 0 ),
+	[14] = XE2_PAT( 0, 1, 0, 0, 0, 0 ),
+	[15] = XE2_PAT( 1, 1, 0, 1, 1, 0 ),
+	[16] = XE2_PAT( 0, 1, 0, 0, 3, 2 ),
+	/* 17 is reserved; leave set to all 0's */
+	[18] = XE2_PAT( 1, 0, 0, 2, 3, 0 ),
+	[19] = XE2_PAT( 1, 0, 0, 2, 3, 2 ),
+	[20] = XE2_PAT( 0, 0, 1, 0, 3, 0 ),
+	[21] = XE2_PAT( 0, 1, 1, 0, 3, 0 ),
+	[22] = XE2_PAT( 0, 0, 1, 0, 3, 2 ),
+	[23] = XE2_PAT( 0, 0, 1, 0, 3, 3 ),
+	[24] = XE2_PAT( 0, 0, 2, 0, 3, 0 ),
+	[25] = XE2_PAT( 0, 1, 2, 0, 3, 0 ),
+	[26] = XE2_PAT( 0, 0, 2, 0, 3, 2 ),
+	[27] = XE2_PAT( 0, 0, 2, 0, 3, 3 ),
+	[28] = XE2_PAT( 0, 0, 3, 0, 3, 0 ),
+	[29] = XE2_PAT( 0, 1, 3, 0, 3, 0 ),
+	[30] = XE2_PAT( 0, 0, 3, 0, 3, 2 ),
+	[31] = XE2_PAT( 0, 0, 3, 0, 3, 3 ),
+};
+
 u16 xe_pat_index_get_coh_mode(struct xe_device *xe, u16 pat_index)
 {
 	WARN_ON(pat_index >= xe->pat.n_entries);
@@ -508,6 +547,20 @@ void xe_pat_init_early(struct xe_device *xe)
 		xe->pat.idx[XE_CACHE_NONE] = 3;
 		xe->pat.idx[XE_CACHE_WT] = 3;	/* N/A (no display); use UC */
 		xe->pat.idx[XE_CACHE_WB] = 2;
+	} else if (GRAPHICS_VER(xe) == 35) {
+		xe->pat.ops = &xe2_pat_ops;
+		xe->pat.table = xe3p_lpg_pat_table;
+		xe->pat.pat_ats = &xe2_pat_ats;
+		if (!IS_DGFX(xe)) {
+			xe->pat.pat_primary_pta = &xe3p_primary_pat_pta;
+			xe->pat.pat_media_pta = &xe3p_media_pat_pta;
+		}
+		xe->pat.n_entries = ARRAY_SIZE(xe3p_lpg_pat_table);
+		xe->pat.idx[XE_CACHE_NONE] = 3;
+		xe->pat.idx[XE_CACHE_WT] = 15;
+		xe->pat.idx[XE_CACHE_WB] = 2;
+		xe->pat.idx[XE_CACHE_NONE_COMPRESSION] = 12;
+		xe->pat.idx[XE_CACHE_WB_COMPRESSION] = 16;
 	} else if (GRAPHICS_VER(xe) == 30 || GRAPHICS_VER(xe) == 20) {
 		xe->pat.ops = &xe2_pat_ops;
 		if (GRAPHICS_VER(xe) == 30) {

-- 
2.52.0