From: Suraj Kandpal <suraj.kandpal@intel.com>
To: intel-xe@lists.freedesktop.org, intel-gfx@lists.freedesktop.org
Cc: ankit.k.nautiyal@intel.com, arun.r.murthy@intel.com,
Suraj Kandpal <suraj.kandpal@intel.com>
Subject: [PATCH v3 05/10] drm/i915/display: Add bits for link_n_extended for DISPLAY >= 14
Date: Wed, 16 Sep 2026 14:39:41 +0530 [thread overview]
Message-ID: <20260916090946.677564-6-suraj.kandpal@intel.com> (raw)
In-Reply-To: <20260916090946.677564-1-suraj.kandpal@intel.com>
From: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
LINK_N register has bits 31:24 for extended link N value used for
HDMI2.1 and for an alternate mode of operation of DP TG DDA.
Add support for these extra bits.
For displays with version 14 or higher, PIPE_LINK_N1_EXTENDED_MASK
(bits 31:24) is used to handle the extended link N bits. For older
platforms, DATA_LINK_M_N_MASK (bits 23:0) is used to handle the
standard link N bits. This distinction ensures clarity and maintains
the semantics for platforms that support the extended bits. In
subsequent changes the logic is updated to conditionally apply the
extended link N bits.
v2: Drop extra link_n_ext member. (Jani)
v3: Avoid link_n_ext in set_m_n helper. (Jani)
v4: Rebase, and update commit message.
Bspec:50488
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 18 ++++++++++++++++--
.../gpu/drm/i915/display/intel_display_regs.h | 2 ++
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index c53163d7c082..6d2025e10995 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -2711,14 +2711,22 @@ void intel_set_m_n(struct intel_display *display,
intel_reg_t data_m_reg, intel_reg_t data_n_reg,
intel_reg_t link_m_reg, intel_reg_t link_n_reg)
{
+ u32 link_n = m_n->link_n;
+
intel_de_write(display, data_m_reg, TU_SIZE(m_n->tu) | m_n->data_m);
intel_de_write(display, data_n_reg, m_n->data_n);
intel_de_write(display, link_m_reg, m_n->link_m);
+
+ if (DISPLAY_VER(display) >= 14)
+ link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+ else
+ link_n &= DATA_LINK_M_N_MASK;
+
/*
* On BDW+ writing LINK_N arms the double buffered update
* of all the M/N registers, so it must be written last.
*/
- intel_de_write(display, link_n_reg, m_n->link_n);
+ intel_de_write(display, link_n_reg, link_n);
}
bool intel_cpu_transcoder_has_m2_n2(struct intel_display *display,
@@ -3475,7 +3483,13 @@ void intel_get_m_n(struct intel_display *display,
intel_reg_t link_m_reg, intel_reg_t link_n_reg)
{
m_n->link_m = intel_de_read(display, link_m_reg) & DATA_LINK_M_N_MASK;
- m_n->link_n = intel_de_read(display, link_n_reg) & DATA_LINK_M_N_MASK;
+ m_n->link_n = intel_de_read(display, link_n_reg);
+
+ if (DISPLAY_VER(display) >= 14)
+ m_n->link_n &= ~PIPE_LINK_N1_EXTENDED_MASK;
+ else
+ m_n->link_n &= DATA_LINK_M_N_MASK;
+
m_n->data_m = intel_de_read(display, data_m_reg) & DATA_LINK_M_N_MASK;
m_n->data_n = intel_de_read(display, data_n_reg) & DATA_LINK_M_N_MASK;
m_n->tu = REG_FIELD_GET(TU_SIZE_MASK, intel_de_read(display, data_m_reg)) + 1;
diff --git a/drivers/gpu/drm/i915/display/intel_display_regs.h b/drivers/gpu/drm/i915/display/intel_display_regs.h
index 8251ec15190b..57f388c958b4 100644
--- a/drivers/gpu/drm/i915/display/intel_display_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_display_regs.h
@@ -1190,6 +1190,8 @@
#define _PIPEA_LINK_N1 0x60044
#define _PIPEB_LINK_N1 0x61044
+#define PIPE_LINK_N1_EXTENDED_MASK REG_GENMASK(31, 24)
+#define PIPE_LINK_N1_EXTENDED(val) REG_FIELD_PREP(PIPE_LINK_N1_EXTENDED_MASK, (val))
#define PIPE_LINK_N1(dev_priv, tran) _MMIO_TRANS2(dev_priv, tran, _PIPEA_LINK_N1)
#define _PIPEA_LINK_M2 0x60048
--
2.34.1
next prev parent reply other threads:[~2026-09-16 9:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-16 9:09 [PATCH v3 00/10] Implement Wa_14021768792 to bypass m_n ratio limit Suraj Kandpal
2026-09-16 9:09 ` [PATCH v3 01/10] drm/i915/display: Add helper to compute link M/N ratio for reuse Suraj Kandpal
2026-09-16 9:09 ` [PATCH v3 02/10] drm/i915/dp: Limit M/N ratio for DP SST Suraj Kandpal
2026-09-16 9:25 ` sashiko-bot
2026-09-16 9:33 ` Kandpal, Suraj
2026-09-16 9:09 ` [PATCH v3 03/10] drm/i915/dp_mst: Limit M/N ratio for MST Suraj Kandpal
2026-09-16 9:09 ` [PATCH v3 04/10] drm/i915/dp: Add M/N ratio check with warning for DP link config Suraj Kandpal
2026-09-16 9:23 ` sashiko-bot
2026-09-16 9:09 ` Suraj Kandpal [this message]
2026-09-16 9:09 ` [PATCH v3 06/10] drm/i915/display_wa: Add support for Wa_14021768792 Suraj Kandpal
2026-09-16 9:09 ` [PATCH v3 07/10] drm/i915/display: Add bits for Wa_14021768792 for linkm/n ratio > 10 Suraj Kandpal
2026-09-16 9:23 ` sashiko-bot
2026-09-16 9:09 ` [PATCH v3 08/10] drm/i915/display: Implement Wa_14021768792 for BMG DP for link_m/n " Suraj Kandpal
2026-09-16 9:27 ` sashiko-bot
2026-09-16 9:09 ` [PATCH v3 09/10] drm/i915/dp: Extend intel_dp_can_support_m_n() for BMG M/N bypass Suraj Kandpal
2026-09-16 9:09 ` [PATCH v3 10/10] drm/i915/dp: Bump the max Link M/N ratio to 22 for DISPLAY_VER >= 35 Suraj Kandpal
2026-09-16 9:18 ` ✓ CI.KUnit: success for Implement Wa_14021768792 to bypass m_n ratio limit (rev8) Patchwork
2026-09-16 9:55 ` ✓ Xe.CI.BAT: " Patchwork
2026-09-16 11:30 ` ✗ Xe.CI.FULL: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260916090946.677564-6-suraj.kandpal@intel.com \
--to=suraj.kandpal@intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=arun.r.murthy@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox