From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Soham Purkait <soham.purkait@intel.com>
Cc: <intel-xe@lists.freedesktop.org>, <riana.tauro@intel.com>,
<anshuman.gupta@intel.com>, <aravind.iddamsetty@linux.intel.com>,
<badal.nilawar@intel.com>, <raag.jadav@intel.com>,
<ravi.kishore.koppuravuri@intel.com>,
<mallesh.koujalagi@intel.com>, <anoop.c.vijay@intel.com>
Subject: Re: [PATCH v1 1/2] drm/xe/xe_ras: Add structures and commands for RAS GPU health indicator
Date: Fri, 17 Apr 2026 10:45:53 -0400 [thread overview]
Message-ID: <aeJHoas-vaJf7zI7@intel.com> (raw)
In-Reply-To: <20260416093610.4085667-2-soham.purkait@intel.com>
On Thu, Apr 16, 2026 at 03:06:09PM +0530, Soham Purkait wrote:
> Add the sysctrl commands and response structures for GPU health
> indicator supported by RAS.
>
As Andy pointed out, please improve the commit message.
> Signed-off-by: Soham Purkait <soham.purkait@intel.com>
> ---
> drivers/gpu/drm/xe/xe_ras_types.h | 65 +++++++++++++++++++
> drivers/gpu/drm/xe/xe_sysctrl_mailbox_types.h | 15 +++++
> 2 files changed, 80 insertions(+)
> create mode 100644 drivers/gpu/drm/xe/xe_ras_types.h
>
> diff --git a/drivers/gpu/drm/xe/xe_ras_types.h b/drivers/gpu/drm/xe/xe_ras_types.h
> new file mode 100644
> index 000000000000..a05cfd971acd
> --- /dev/null
> +++ b/drivers/gpu/drm/xe/xe_ras_types.h
> @@ -0,0 +1,65 @@
> +/* SPDX-License-Identifier: MIT */
> +/*
> + * Copyright © 2026 Intel Corporation
> + */
> +
> +#ifndef _XE_RAS_TYPES_H_
> +#define _XE_RAS_TYPES_H_
> +
> +#include <linux/types.h>
> +
> +/**
> + * typedef xe_ras_health_status_t - Device health status values (8-bit)
> + *
> + * Three-state health indicator value reported by system controller commands.
> + *
> + * The expected values are:
> + * - 0: ok - The device is healthy and operating within normal parameters.
> + * - 1: warning - The device is experiencing minor issues but is still operational.
> + * - 2: critical - The device is in a critical state and may not be operational.
> + */
> +typedef u8 xe_ras_health_status_t;
Please use enum instead of this...
> +
> +/**
> + * struct xe_ras_health_get_input - Input for XE_SYSCTRL_CMD_GET_HEALTH
> + */
> +struct xe_ras_health_get_input {
> + /** @reserved: Reserved for future use, must be 0 */
> + u32 reserved[2];
> +} __packed;
> +
> +/**
> + * struct xe_ras_health_get_response - Response for XE_SYSCTRL_CMD_GET_HEALTH
> + */
> +struct xe_ras_health_get_response {
> + /** @current_health: Current health status (OK/WARNING/CRITICAL) */
> + xe_ras_health_status_t current_health;
> + /** @reserved: Reserved for alignment */
> + u8 reserved[3];
> +} __packed;
> +
> +/**
> + * struct xe_ras_health_set_input - Input for XE_SYSCTRL_CMD_SET_HEALTH
> + */
> +struct xe_ras_health_set_input {
> + /** @new_health: New health status to set */
> + xe_ras_health_status_t new_health;
> + /** @reserved: Reserved for alignment */
> + u8 reserved[3];
> +} __packed;
> +
> +/**
> + * struct xe_ras_health_set_response - Response for XE_SYSCTRL_CMD_SET_HEALTH
> + */
> +struct xe_ras_health_set_response {
> + /** @operation_status: Status of set operation (RAS_STATUS_*) */
> + u32 operation_status;
> + /** @current_health: Health status after this change */
> + xe_ras_health_status_t current_health;
> + /** @reserved: Reserved for alignment */
> + u8 reserved[3];
> + /** @reserved_2: Reserved for future expansion */
> + u32 reserved_2[2];
> +} __packed;
> +
> +#endif /* _XE_RAS_TYPES_H_ */
> diff --git a/drivers/gpu/drm/xe/xe_sysctrl_mailbox_types.h b/drivers/gpu/drm/xe/xe_sysctrl_mailbox_types.h
> index 89456aec6097..fc73e02c3202 100644
> --- a/drivers/gpu/drm/xe/xe_sysctrl_mailbox_types.h
> +++ b/drivers/gpu/drm/xe/xe_sysctrl_mailbox_types.h
> @@ -10,6 +10,21 @@
>
> #include "abi/xe_sysctrl_abi.h"
>
> +/**
> + * enum xe_sysctrl_mailbox_command_id - RAS Command ID's for GFSP group
> + *
> + * @XE_SYSCTRL_CMD_GET_HEALTH: Get current health status
> + * @XE_SYSCTRL_CMD_SET_HEALTH: Set new health status
> + */
> +enum xe_sysctrl_mailbox_command_id {
> + XE_SYSCTRL_CMD_GET_HEALTH = 0x0B,
> + XE_SYSCTRL_CMD_SET_HEALTH = 0x0C
> +};
> +
> +enum xe_sysctrl_group {
> + XE_SYSCTRL_GROUP_GFSP = 1
> +};
> +
> /**
> * struct xe_sysctrl_mailbox_command - System Controller mailbox command
> */
> --
> 2.34.1
>
next prev parent reply other threads:[~2026-04-17 14:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-16 9:36 [PATCH v1 0/2] drm/xe: Add support for GPU health indicator Soham Purkait
2026-04-16 9:36 ` [PATCH v1 1/2] drm/xe/xe_ras: Add structures and commands for RAS " Soham Purkait
2026-04-16 11:39 ` Andi Shyti
2026-04-17 14:45 ` Rodrigo Vivi [this message]
2026-04-16 9:36 ` [PATCH v1 2/2] drm/xe/xe_ras: Add RAS support for " Soham Purkait
2026-04-16 11:54 ` Andi Shyti
2026-04-17 14:51 ` Rodrigo Vivi
2026-04-20 15:26 ` Andi Shyti
2026-04-20 19:51 ` Rodrigo Vivi
2026-04-21 12:56 ` Andi Shyti
2026-04-21 13:21 ` Rodrigo Vivi
2026-04-22 6:05 ` Purkait, Soham
2026-04-20 16:19 ` Purkait, Soham
2026-04-20 17:35 ` Andi Shyti
2026-04-16 9:55 ` ✗ CI.checkpatch: warning for drm/xe: Add " Patchwork
2026-04-16 9:56 ` ✓ CI.KUnit: success " Patchwork
2026-04-16 10:58 ` ✓ Xe.CI.BAT: " Patchwork
2026-04-16 12:01 ` ✗ Xe.CI.FULL: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aeJHoas-vaJf7zI7@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=anoop.c.vijay@intel.com \
--cc=anshuman.gupta@intel.com \
--cc=aravind.iddamsetty@linux.intel.com \
--cc=badal.nilawar@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=mallesh.koujalagi@intel.com \
--cc=raag.jadav@intel.com \
--cc=ravi.kishore.koppuravuri@intel.com \
--cc=riana.tauro@intel.com \
--cc=soham.purkait@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox