From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v3 09/14] ARM: dts: aspeed: yosemite4: Revise i2c14 and i2c15 schematic change
Date: Mon, 11 Dec 2023 13:47:24 +0800 [thread overview]
Message-ID: <20231211054730.208588-10-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20231211054730.208588-1-Delphine_CC_Chiu@wiwynn.com>
Revise i2c14 and i2c15 schematic change:
- Revise adc128d818 adc mode for yosemite4 schematic change
- Revise ina233 for yosemite4 schematic change
- Remove idle state setting for yosemite4 NIC connection
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 31 ++++++++++++-------
1 file changed, 20 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index ccb5ecd8d9a6..ed2b1200603d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1010,44 +1010,54 @@ &i2c14 {
adc at 1d {
compatible = "ti,adc128d818";
reg = <0x1d>;
- ti,mode = /bits/ 8 <2>;
+ ti,mode = /bits/ 8 <1>;
};
- adc at 35 {
+ adc at 36 {
compatible = "ti,adc128d818";
- reg = <0x35>;
- ti,mode = /bits/ 8 <2>;
+ reg = <0x36>;
+ ti,mode = /bits/ 8 <1>;
};
adc at 37 {
compatible = "ti,adc128d818";
reg = <0x37>;
- ti,mode = /bits/ 8 <2>;
+ ti,mode = /bits/ 8 <1>;
};
power-sensor at 40 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x40>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 41 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x41>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 42 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x42>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 43 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x43>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 44 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x44>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
temperature-sensor at 4e {
@@ -1217,7 +1227,6 @@ mctp at 10 {
i2c-mux at 72 {
compatible = "nxp,pca9544";
- i2c-mux-idle-disconnect;
reg = <0x72>;
imux24: i2c at 0 {
--
2.25.1
next prev parent reply other threads:[~2023-12-11 5:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-11 5:47 [PATCH v3 00/14] Add i2c-mux and eeprom devices for Meta Yosemite 4 Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 01/14] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 02/14] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 03/14] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 04/14] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 05/14] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 06/14] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 07/14] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 08/14] ARM: dts: aspeed: yosemite4: Revise i2c11 and i2c12 schematic change Delphine CC Chiu
2023-12-13 7:20 ` Krzysztof Kozlowski
2023-12-11 5:47 ` Delphine CC Chiu [this message]
2023-12-11 5:47 ` [PATCH v3 10/14] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 11/14] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 12/14] ARM: dts: aspeed: yosemite4: add mctp config for NIC Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 13/14] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 14/14] ARM: dts: aspeed: yosemite4: Revise gpio name Delphine CC Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231211054730.208588-10-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox