From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v3 12/14] ARM: dts: aspeed: yosemite4: add mctp config for NIC
Date: Mon, 11 Dec 2023 13:47:27 +0800 [thread overview]
Message-ID: <20231211054730.208588-13-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20231211054730.208588-1-Delphine_CC_Chiu@wiwynn.com>
add mctp config for NIC
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 073f27f1e35f..c8e3a85b7a11 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1273,40 +1273,64 @@ imux24: i2c at 0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ mctp-controller;
temperature-sensor at 1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ emc1403 at 3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
imux25: i2c at 1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+ mctp-controller;
temperature-sensor at 1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ emc1403 at 3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
imux26: i2c at 2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
+ mctp-controller;
temperature-sensor at 1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ emc1403 at 3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
imux27: i2c at 3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
+ mctp-controller;
temperature-sensor at 1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ emc1403 at 3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
};
};
--
2.25.1
next prev parent reply other threads:[~2023-12-11 5:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-11 5:47 [PATCH v3 00/14] Add i2c-mux and eeprom devices for Meta Yosemite 4 Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 01/14] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 02/14] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 03/14] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 04/14] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 05/14] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 06/14] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 07/14] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 08/14] ARM: dts: aspeed: yosemite4: Revise i2c11 and i2c12 schematic change Delphine CC Chiu
2023-12-13 7:20 ` Krzysztof Kozlowski
2023-12-11 5:47 ` [PATCH v3 09/14] ARM: dts: aspeed: yosemite4: Revise i2c14 and i2c15 " Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 10/14] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 11/14] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config Delphine CC Chiu
2023-12-11 5:47 ` Delphine CC Chiu [this message]
2023-12-11 5:47 ` [PATCH v3 13/14] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2023-12-11 5:47 ` [PATCH v3 14/14] ARM: dts: aspeed: yosemite4: Revise gpio name Delphine CC Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231211054730.208588-13-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox