[PATCH 0/2] fstests: a couple fixes for btrfs/254

[PATCH 0/2] fstests: a couple fixes for btrfs/254

[fdmanana]

From: Filipe Manana <fdmanana@suse.com>

Fixes for btrfs/254, details in the change logs.

Filipe Manana (2):
  btrfs/254: don't leave mount on test fs in case of failure/interruption
  btrfs/254: fix test failure in case scratch devices are larger than 50G

 tests/btrfs/254 | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

-- 
2.45.2

[PATCH 1/2] btrfs/254: don't leave mount on test fs in case of failure/interruption

[fdmanana]

From: Filipe Manana <fdmanana@suse.com>

If the test fails or is interrupted after mounting $scratch_dev3 inside
the test filesystem and before unmounting at test_add_device(), we leave
without being unable to unmount the test filesystem since it has a mount
inside it. This results in the need to manually unmount $scratch_dev3,
otherwise a subsequent run of fstests fails since the unmount of the
test device fails with -EBUSY.

Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
function.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
---
 tests/btrfs/254 | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tests/btrfs/254 b/tests/btrfs/254
index d9c9eea9..6523389b 100755
--- a/tests/btrfs/254
+++ b/tests/btrfs/254
@@ -21,6 +21,7 @@ _cleanup()
 {
 	cd /
 	rm -f $tmp.*
+	$UMOUNT_PROG $seq_mnt > /dev/null 2>&1
 	rm -rf $seq_mnt > /dev/null 2>&1
 	cleanup_dmdev
 }
-- 
2.45.2

Re: [PATCH 1/2] btrfs/254: don't leave mount on test fs in case of failure/interruption

[Anand Jain]

On 20/2/25 02:19, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> If the test fails or is interrupted after mounting $scratch_dev3 inside
> the test filesystem and before unmounting at test_add_device(), we leave
> without being unable to unmount the test filesystem since it has a mount
> inside it. This results in the need to manually unmount $scratch_dev3,
> otherwise a subsequent run of fstests fails since the unmount of the
> test device fails with -EBUSY.
> 
> Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
> function.
> 
> Signed-off-by: Filipe Manana <fdmanana@suse.com>
> ---
>   tests/btrfs/254 | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/tests/btrfs/254 b/tests/btrfs/254
> index d9c9eea9..6523389b 100755
> --- a/tests/btrfs/254
> +++ b/tests/btrfs/254
> @@ -21,6 +21,7 @@ _cleanup()
>   {
>   	cd /
>   	rm -f $tmp.*
> +	$UMOUNT_PROG $seq_mnt > /dev/null 2>&1
>   	rm -rf $seq_mnt > /dev/null 2>&1
>   	cleanup_dmdev
>   }


Reviewed-by: Anand Jain <anand.jain@oracle.com>

Re: [PATCH 1/2] btrfs/254: don't leave mount on test fs in case of failure/interruption

[Darrick J. Wong]

On Thu, Feb 20, 2025 at 01:27:32PM +0800, Anand Jain wrote:
> On 20/2/25 02:19, fdmanana@kernel.org wrote:
> > From: Filipe Manana <fdmanana@suse.com>
> > 
> > If the test fails or is interrupted after mounting $scratch_dev3 inside
> > the test filesystem and before unmounting at test_add_device(), we leave
> > without being unable to unmount the test filesystem since it has a mount
> > inside it. This results in the need to manually unmount $scratch_dev3,
> > otherwise a subsequent run of fstests fails since the unmount of the
> > test device fails with -EBUSY.
> > 
> > Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
> > function.
> > 
> > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > ---
> >   tests/btrfs/254 | 1 +
> >   1 file changed, 1 insertion(+)
> > 
> > diff --git a/tests/btrfs/254 b/tests/btrfs/254
> > index d9c9eea9..6523389b 100755
> > --- a/tests/btrfs/254
> > +++ b/tests/btrfs/254
> > @@ -21,6 +21,7 @@ _cleanup()
> >   {
> >   	cd /
> >   	rm -f $tmp.*
> > +	$UMOUNT_PROG $seq_mnt > /dev/null 2>&1

This should use the _unmount helper that's in for-next.

--D

> >   	rm -rf $seq_mnt > /dev/null 2>&1
> >   	cleanup_dmdev
> >   }
> 
> 
> Reviewed-by: Anand Jain <anand.jain@oracle.com>
> 
> 
> 

Re: [PATCH 1/2] btrfs/254: don't leave mount on test fs in case of failure/interruption

[Filipe Manana]

On Thu, Feb 20, 2025 at 5:03 PM Darrick J. Wong <djwong@kernel.org> wrote:
>
> On Thu, Feb 20, 2025 at 01:27:32PM +0800, Anand Jain wrote:
> > On 20/2/25 02:19, fdmanana@kernel.org wrote:
> > > From: Filipe Manana <fdmanana@suse.com>
> > >
> > > If the test fails or is interrupted after mounting $scratch_dev3 inside
> > > the test filesystem and before unmounting at test_add_device(), we leave
> > > without being unable to unmount the test filesystem since it has a mount
> > > inside it. This results in the need to manually unmount $scratch_dev3,
> > > otherwise a subsequent run of fstests fails since the unmount of the
> > > test device fails with -EBUSY.
> > >
> > > Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
> > > function.
> > >
> > > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > > ---
> > >   tests/btrfs/254 | 1 +
> > >   1 file changed, 1 insertion(+)
> > >
> > > diff --git a/tests/btrfs/254 b/tests/btrfs/254
> > > index d9c9eea9..6523389b 100755
> > > --- a/tests/btrfs/254
> > > +++ b/tests/btrfs/254
> > > @@ -21,6 +21,7 @@ _cleanup()
> > >   {
> > >     cd /
> > >     rm -f $tmp.*
> > > +   $UMOUNT_PROG $seq_mnt > /dev/null 2>&1
>
> This should use the _unmount helper that's in for-next.

Sure, it does the same, except that it redirects stdout and stderr to
$seqres.full.

Some tests are still calling  $UMOUNT_PROG directly. And that's often
what we want, so that if umount fails we get a mismatch with the
golden output instead of ignoring the failure.
But in this case it's fine.

Anand, since you've already merged this patch into your repo, can you
please replace that line with the following?

_unmount $seq_mnt

Thanks.

>
> --D
>
> > >     rm -rf $seq_mnt > /dev/null 2>&1
> > >     cleanup_dmdev
> > >   }
> >
> >
> > Reviewed-by: Anand Jain <anand.jain@oracle.com>
> >
> >
> >

Re: [PATCH 1/2] btrfs/254: don't leave mount on test fs in case of failure/interruption

[Anand Jain]

On 21/2/25 02:22, Filipe Manana wrote:
> On Thu, Feb 20, 2025 at 5:03 PM Darrick J. Wong <djwong@kernel.org> wrote:
>>
>> On Thu, Feb 20, 2025 at 01:27:32PM +0800, Anand Jain wrote:
>>> On 20/2/25 02:19, fdmanana@kernel.org wrote:
>>>> From: Filipe Manana <fdmanana@suse.com>
>>>>
>>>> If the test fails or is interrupted after mounting $scratch_dev3 inside
>>>> the test filesystem and before unmounting at test_add_device(), we leave
>>>> without being unable to unmount the test filesystem since it has a mount
>>>> inside it. This results in the need to manually unmount $scratch_dev3,
>>>> otherwise a subsequent run of fstests fails since the unmount of the
>>>> test device fails with -EBUSY.
>>>>
>>>> Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
>>>> function.
>>>>
>>>> Signed-off-by: Filipe Manana <fdmanana@suse.com>
>>>> ---
>>>>    tests/btrfs/254 | 1 +
>>>>    1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/tests/btrfs/254 b/tests/btrfs/254
>>>> index d9c9eea9..6523389b 100755
>>>> --- a/tests/btrfs/254
>>>> +++ b/tests/btrfs/254
>>>> @@ -21,6 +21,7 @@ _cleanup()
>>>>    {
>>>>      cd /
>>>>      rm -f $tmp.*
>>>> +   $UMOUNT_PROG $seq_mnt > /dev/null 2>&1
>>
>> This should use the _unmount helper that's in for-next.
> 
> Sure, it does the same, except that it redirects stdout and stderr to
> $seqres.full.
> 
> Some tests are still calling  $UMOUNT_PROG directly. And that's often
> what we want, so that if umount fails we get a mismatch with the
> golden output instead of ignoring the failure.
> But in this case it's fine.
> 
> Anand, since you've already merged this patch into your repo, can you
> please replace that line with the following?
> 
> _unmount $seq_mnt
> 

Applied.
Thanks.

Zorro,

Just checked, and it looks like you haven’t pulled in patches
from my for-next yet.
I went ahead and force-updated it to keep unnecessary noise
off the ML.

If you're pulling this weekend, there are three patches in
for-next ready to merge.

( https://github.com/asj/fstests.git for-next.)


Thanks!
Anand

> Thanks.
> 
>>
>> --D
>>
>>>>      rm -rf $seq_mnt > /dev/null 2>&1
>>>>      cleanup_dmdev
>>>>    }
>>>
>>>
>>> Reviewed-by: Anand Jain <anand.jain@oracle.com>
>>>
>>>
>>>

Re: [PATCH 1/2] btrfs/254: don't leave mount on test fs in case of failure/interruption

[Zorro Lang]

On Fri, Feb 21, 2025 at 09:48:10AM +0800, Anand Jain wrote:
> On 21/2/25 02:22, Filipe Manana wrote:
> > On Thu, Feb 20, 2025 at 5:03 PM Darrick J. Wong <djwong@kernel.org> wrote:
> > > 
> > > On Thu, Feb 20, 2025 at 01:27:32PM +0800, Anand Jain wrote:
> > > > On 20/2/25 02:19, fdmanana@kernel.org wrote:
> > > > > From: Filipe Manana <fdmanana@suse.com>
> > > > > 
> > > > > If the test fails or is interrupted after mounting $scratch_dev3 inside
> > > > > the test filesystem and before unmounting at test_add_device(), we leave
> > > > > without being unable to unmount the test filesystem since it has a mount
> > > > > inside it. This results in the need to manually unmount $scratch_dev3,
> > > > > otherwise a subsequent run of fstests fails since the unmount of the
> > > > > test device fails with -EBUSY.
> > > > > 
> > > > > Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
> > > > > function.
> > > > > 
> > > > > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > > > > ---
> > > > >    tests/btrfs/254 | 1 +
> > > > >    1 file changed, 1 insertion(+)
> > > > > 
> > > > > diff --git a/tests/btrfs/254 b/tests/btrfs/254
> > > > > index d9c9eea9..6523389b 100755
> > > > > --- a/tests/btrfs/254
> > > > > +++ b/tests/btrfs/254
> > > > > @@ -21,6 +21,7 @@ _cleanup()
> > > > >    {
> > > > >      cd /
> > > > >      rm -f $tmp.*
> > > > > +   $UMOUNT_PROG $seq_mnt > /dev/null 2>&1
> > > 
> > > This should use the _unmount helper that's in for-next.
> > 
> > Sure, it does the same, except that it redirects stdout and stderr to
> > $seqres.full.
> > 
> > Some tests are still calling  $UMOUNT_PROG directly. And that's often
> > what we want, so that if umount fails we get a mismatch with the
> > golden output instead of ignoring the failure.
> > But in this case it's fine.
> > 
> > Anand, since you've already merged this patch into your repo, can you
> > please replace that line with the following?
> > 
> > _unmount $seq_mnt
> > 
> 
> Applied.
> Thanks.
> 
> Zorro,
> 
> Just checked, and it looks like you haven’t pulled in patches
> from my for-next yet.
> I went ahead and force-updated it to keep unnecessary noise
> off the ML.
> 
> If you're pulling this weekend, there are three patches in
> for-next ready to merge.

Actually I've pulled, just haven't pushed :) Then I saw this conversation, so
I'm going to reset and re-pull. The next release is nearly done, I'll pick
up more simple patches with RVB today, then prepare to release it. Thanks!

Thanks,
Zorro

> 
> ( https://github.com/asj/fstests.git for-next.)
> 
> 
> Thanks!
> Anand
> 
> > Thanks.
> > 
> > > 
> > > --D
> > > 
> > > > >      rm -rf $seq_mnt > /dev/null 2>&1
> > > > >      cleanup_dmdev
> > > > >    }
> > > > 
> > > > 
> > > > Reviewed-by: Anand Jain <anand.jain@oracle.com>
> > > > 
> > > > 
> > > > 
> 

Re: [PATCH 1/2] btrfs/254: don't leave mount on test fs in case of failure/interruption

[Darrick J. Wong]

On Thu, Feb 20, 2025 at 06:22:57PM +0000, Filipe Manana wrote:
> On Thu, Feb 20, 2025 at 5:03 PM Darrick J. Wong <djwong@kernel.org> wrote:
> >
> > On Thu, Feb 20, 2025 at 01:27:32PM +0800, Anand Jain wrote:
> > > On 20/2/25 02:19, fdmanana@kernel.org wrote:
> > > > From: Filipe Manana <fdmanana@suse.com>
> > > >
> > > > If the test fails or is interrupted after mounting $scratch_dev3 inside
> > > > the test filesystem and before unmounting at test_add_device(), we leave
> > > > without being unable to unmount the test filesystem since it has a mount
> > > > inside it. This results in the need to manually unmount $scratch_dev3,
> > > > otherwise a subsequent run of fstests fails since the unmount of the
> > > > test device fails with -EBUSY.
> > > >
> > > > Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
> > > > function.
> > > >
> > > > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > > > ---
> > > >   tests/btrfs/254 | 1 +
> > > >   1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/tests/btrfs/254 b/tests/btrfs/254
> > > > index d9c9eea9..6523389b 100755
> > > > --- a/tests/btrfs/254
> > > > +++ b/tests/btrfs/254
> > > > @@ -21,6 +21,7 @@ _cleanup()
> > > >   {
> > > >     cd /
> > > >     rm -f $tmp.*
> > > > +   $UMOUNT_PROG $seq_mnt > /dev/null 2>&1
> >
> > This should use the _unmount helper that's in for-next.
> 
> Sure, it does the same, except that it redirects stdout and stderr to
> $seqres.full.
> 
> Some tests are still calling  $UMOUNT_PROG directly. And that's often
> what we want, so that if umount fails we get a mismatch with the
> golden output instead of ignoring the failure.
> But in this case it's fine.

<groan> You're right, I'd repressed that Chinner decided to introduce
_unmount so that he could improve logging of unmount failures but then
he only bothered converting tests/{generic,xfs} because he didn't give
a damn about anyone else.

Now fstests is stuck with a half finished conversion and no clarity
about whether the rest of the $UMOUNT_PROG invocations should be
converted to _umount or if those are somehow intentional.

Hey Zorro, do you have any opinion on this?  Should someone just finish
the $UMOUNT_PROG -> _unmount conversion next week?

--D

> Anand, since you've already merged this patch into your repo, can you
> please replace that line with the following?
> 
> _unmount $seq_mnt
> 
> Thanks.
> 
> >
> > --D
> >
> > > >     rm -rf $seq_mnt > /dev/null 2>&1
> > > >     cleanup_dmdev
> > > >   }
> > >
> > >
> > > Reviewed-by: Anand Jain <anand.jain@oracle.com>
> > >
> > >
> > >
> 

Re: [PATCH 1/2] btrfs/254: don't leave mount on test fs in case of failure/interruption

[Zorro Lang]

On Thu, Feb 20, 2025 at 08:18:19PM -0800, Darrick J. Wong wrote:
> On Thu, Feb 20, 2025 at 06:22:57PM +0000, Filipe Manana wrote:
> > On Thu, Feb 20, 2025 at 5:03 PM Darrick J. Wong <djwong@kernel.org> wrote:
> > >
> > > On Thu, Feb 20, 2025 at 01:27:32PM +0800, Anand Jain wrote:
> > > > On 20/2/25 02:19, fdmanana@kernel.org wrote:
> > > > > From: Filipe Manana <fdmanana@suse.com>
> > > > >
> > > > > If the test fails or is interrupted after mounting $scratch_dev3 inside
> > > > > the test filesystem and before unmounting at test_add_device(), we leave
> > > > > without being unable to unmount the test filesystem since it has a mount
> > > > > inside it. This results in the need to manually unmount $scratch_dev3,
> > > > > otherwise a subsequent run of fstests fails since the unmount of the
> > > > > test device fails with -EBUSY.
> > > > >
> > > > > Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
> > > > > function.
> > > > >
> > > > > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > > > > ---
> > > > >   tests/btrfs/254 | 1 +
> > > > >   1 file changed, 1 insertion(+)
> > > > >
> > > > > diff --git a/tests/btrfs/254 b/tests/btrfs/254
> > > > > index d9c9eea9..6523389b 100755
> > > > > --- a/tests/btrfs/254
> > > > > +++ b/tests/btrfs/254
> > > > > @@ -21,6 +21,7 @@ _cleanup()
> > > > >   {
> > > > >     cd /
> > > > >     rm -f $tmp.*
> > > > > +   $UMOUNT_PROG $seq_mnt > /dev/null 2>&1
> > >
> > > This should use the _unmount helper that's in for-next.
> > 
> > Sure, it does the same, except that it redirects stdout and stderr to
> > $seqres.full.
> > 
> > Some tests are still calling  $UMOUNT_PROG directly. And that's often
> > what we want, so that if umount fails we get a mismatch with the
> > golden output instead of ignoring the failure.
> > But in this case it's fine.
> 
> <groan> You're right, I'd repressed that Chinner decided to introduce
> _unmount so that he could improve logging of unmount failures but then
> he only bothered converting tests/{generic,xfs} because he didn't give
> a damn about anyone else.
> 
> Now fstests is stuck with a half finished conversion and no clarity
> about whether the rest of the $UMOUNT_PROG invocations should be
> converted to _umount or if those are somehow intentional.
> 
> Hey Zorro, do you have any opinion on this?  Should someone just finish
> the $UMOUNT_PROG -> _unmount conversion next week?

The release of this week will have your big randome-fixes. Next release will
deal with your 10 PRs mainly :) So I'll deal with the "$UMOUNT_PROG ->
_unmount conversion" after that. Anyway, we still can review the "conversion"
patch at first.

Thanks,
Zorro

> 
> --D
> 
> > Anand, since you've already merged this patch into your repo, can you
> > please replace that line with the following?
> > 
> > _unmount $seq_mnt
> > 
> > Thanks.
> > 
> > >
> > > --D
> > >
> > > > >     rm -rf $seq_mnt > /dev/null 2>&1
> > > > >     cleanup_dmdev
> > > > >   }
> > > >
> > > >
> > > > Reviewed-by: Anand Jain <anand.jain@oracle.com>
> > > >
> > > >
> > > >
> > 
> 

Re: [PATCH 1/2] btrfs/254: don't leave mount on test fs in case of failure/interruption

[Darrick J. Wong]

On Fri, Feb 21, 2025 at 02:02:43PM +0800, Zorro Lang wrote:
> On Thu, Feb 20, 2025 at 08:18:19PM -0800, Darrick J. Wong wrote:
> > On Thu, Feb 20, 2025 at 06:22:57PM +0000, Filipe Manana wrote:
> > > On Thu, Feb 20, 2025 at 5:03 PM Darrick J. Wong <djwong@kernel.org> wrote:
> > > >
> > > > On Thu, Feb 20, 2025 at 01:27:32PM +0800, Anand Jain wrote:
> > > > > On 20/2/25 02:19, fdmanana@kernel.org wrote:
> > > > > > From: Filipe Manana <fdmanana@suse.com>
> > > > > >
> > > > > > If the test fails or is interrupted after mounting $scratch_dev3 inside
> > > > > > the test filesystem and before unmounting at test_add_device(), we leave
> > > > > > without being unable to unmount the test filesystem since it has a mount
> > > > > > inside it. This results in the need to manually unmount $scratch_dev3,
> > > > > > otherwise a subsequent run of fstests fails since the unmount of the
> > > > > > test device fails with -EBUSY.
> > > > > >
> > > > > > Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
> > > > > > function.
> > > > > >
> > > > > > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > > > > > ---
> > > > > >   tests/btrfs/254 | 1 +
> > > > > >   1 file changed, 1 insertion(+)
> > > > > >
> > > > > > diff --git a/tests/btrfs/254 b/tests/btrfs/254
> > > > > > index d9c9eea9..6523389b 100755
> > > > > > --- a/tests/btrfs/254
> > > > > > +++ b/tests/btrfs/254
> > > > > > @@ -21,6 +21,7 @@ _cleanup()
> > > > > >   {
> > > > > >     cd /
> > > > > >     rm -f $tmp.*
> > > > > > +   $UMOUNT_PROG $seq_mnt > /dev/null 2>&1
> > > >
> > > > This should use the _unmount helper that's in for-next.
> > > 
> > > Sure, it does the same, except that it redirects stdout and stderr to
> > > $seqres.full.
> > > 
> > > Some tests are still calling  $UMOUNT_PROG directly. And that's often
> > > what we want, so that if umount fails we get a mismatch with the
> > > golden output instead of ignoring the failure.
> > > But in this case it's fine.
> > 
> > <groan> You're right, I'd repressed that Chinner decided to introduce
> > _unmount so that he could improve logging of unmount failures but then
> > he only bothered converting tests/{generic,xfs} because he didn't give
> > a damn about anyone else.
> > 
> > Now fstests is stuck with a half finished conversion and no clarity
> > about whether the rest of the $UMOUNT_PROG invocations should be
> > converted to _umount or if those are somehow intentional.
> > 
> > Hey Zorro, do you have any opinion on this?  Should someone just finish
> > the $UMOUNT_PROG -> _unmount conversion next week?
> 
> The release of this week will have your big randome-fixes. Next release will
> deal with your 10 PRs mainly :) So I'll deal with the "$UMOUNT_PROG ->
> _unmount conversion" after that. Anyway, we still can review the "conversion"
> patch at first.

Ok.  Let's do that next week.

--D

> Thanks,
> Zorro
> 
> > 
> > --D
> > 
> > > Anand, since you've already merged this patch into your repo, can you
> > > please replace that line with the following?
> > > 
> > > _unmount $seq_mnt
> > > 
> > > Thanks.
> > > 
> > > >
> > > > --D
> > > >
> > > > > >     rm -rf $seq_mnt > /dev/null 2>&1
> > > > > >     cleanup_dmdev
> > > > > >   }
> > > > >
> > > > >
> > > > > Reviewed-by: Anand Jain <anand.jain@oracle.com>
> > > > >
> > > > >
> > > > >
> > > 
> > 
> 
> 

[PATCH] fstests: finish UMOUNT_PROG to _unmount conversion

[Dave Chinner]

On Thu, Feb 20, 2025 at 08:18:19PM -0800, Darrick J. Wong wrote:
> On Thu, Feb 20, 2025 at 06:22:57PM +0000, Filipe Manana wrote:
> > On Thu, Feb 20, 2025 at 5:03 PM Darrick J. Wong <djwong@kernel.org> wrote:
> > >
> > > On Thu, Feb 20, 2025 at 01:27:32PM +0800, Anand Jain wrote:
> > > > On 20/2/25 02:19, fdmanana@kernel.org wrote:
> > > > > From: Filipe Manana <fdmanana@suse.com>
> > > > >
> > > > > If the test fails or is interrupted after mounting $scratch_dev3 inside
> > > > > the test filesystem and before unmounting at test_add_device(), we leave
> > > > > without being unable to unmount the test filesystem since it has a mount
> > > > > inside it. This results in the need to manually unmount $scratch_dev3,
> > > > > otherwise a subsequent run of fstests fails since the unmount of the
> > > > > test device fails with -EBUSY.
> > > > >
> > > > > Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
> > > > > function.
> > > > >
> > > > > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > > > > ---
> > > > >   tests/btrfs/254 | 1 +
> > > > >   1 file changed, 1 insertion(+)
> > > > >
> > > > > diff --git a/tests/btrfs/254 b/tests/btrfs/254
> > > > > index d9c9eea9..6523389b 100755
> > > > > --- a/tests/btrfs/254
> > > > > +++ b/tests/btrfs/254
> > > > > @@ -21,6 +21,7 @@ _cleanup()
> > > > >   {
> > > > >     cd /
> > > > >     rm -f $tmp.*
> > > > > +   $UMOUNT_PROG $seq_mnt > /dev/null 2>&1
> > >
> > > This should use the _unmount helper that's in for-next.
> > 
> > Sure, it does the same, except that it redirects stdout and stderr to
> > $seqres.full.
> > 
> > Some tests are still calling  $UMOUNT_PROG directly. And that's often
> > what we want, so that if umount fails we get a mismatch with the
> > golden output instead of ignoring the failure.
> > But in this case it's fine.
> 
> <groan> You're right, I'd repressed that Chinner decided to introduce
> _unmount so that he could improve logging of unmount failures but then
> he only bothered converting tests/{generic,xfs} because he didn't give
> a damn about anyone else.

That's uncalled for, Darrick.

You know very well that I posted an incomplete RFC that I was asking
for reveiw on, not for it to be merged. The maintainer decided to
merge it and did not wait for me to finish the conversions.

> Now fstests is stuck with a half finished conversion and no clarity
> about whether the rest of the $UMOUNT_PROG invocations should be
> converted to _umount or if those are somehow intentional.
> 
> Hey Zorro, do you have any opinion on this?  Should someone just finish
> the $UMOUNT_PROG -> _unmount conversion next week?

Why put it off? With the logging fixes to _unmount() that are
already merged, it's a purely mechanical change using sed. Patch
below.

-Dave.

-- 
Dave Chinner
david@fromorbit.com

fstests: finish UMOUNT_PROG to _unmount conversion

From: Dave Chinner <dchinner@redhat.com>

Because only tests/generic and tests/xfs have been converted so far
and the conversion needs finishing. _unmount is a drop-in
replacement for $UMOUNT_PROG, so we can simply do a mechanical
conversion like so:

$ sed -i s/\$UMOUNT_PROG/_unmount/g tests/*/*

Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
 tests/btrfs/020   |  2 +-
 tests/btrfs/029   |  2 +-
 tests/btrfs/031   |  2 +-
 tests/btrfs/060   |  2 +-
 tests/btrfs/065   |  2 +-
 tests/btrfs/066   |  2 +-
 tests/btrfs/067   |  2 +-
 tests/btrfs/068   |  2 +-
 tests/btrfs/075   |  2 +-
 tests/btrfs/089   |  2 +-
 tests/btrfs/124   |  2 +-
 tests/btrfs/125   |  2 +-
 tests/btrfs/185   |  4 ++--
 tests/btrfs/197   |  4 ++--
 tests/btrfs/219   | 12 ++++++------
 tests/btrfs/254   |  2 +-
 tests/btrfs/311   |  2 +-
 tests/btrfs/313   |  2 +-
 tests/btrfs/314   |  2 +-
 tests/btrfs/315   |  2 +-
 tests/btrfs/318   |  6 +++---
 tests/btrfs/326   | 10 +++++-----
 tests/btrfs/330   |  4 ++--
 tests/ext4/032    |  4 ++--
 tests/ext4/052    |  4 ++--
 tests/ext4/053    | 32 ++++++++++++++++----------------
 tests/ext4/056    |  2 +-
 tests/overlay/003 |  2 +-
 tests/overlay/004 |  2 +-
 tests/overlay/005 |  6 +++---
 tests/overlay/014 |  4 ++--
 tests/overlay/022 |  2 +-
 tests/overlay/025 |  4 ++--
 tests/overlay/029 |  6 +++---
 tests/overlay/031 |  8 ++++----
 tests/overlay/035 |  2 +-
 tests/overlay/036 |  8 ++++----
 tests/overlay/037 |  6 +++---
 tests/overlay/040 |  2 +-
 tests/overlay/041 |  2 +-
 tests/overlay/042 |  2 +-
 tests/overlay/043 |  2 +-
 tests/overlay/044 |  2 +-
 tests/overlay/048 |  4 ++--
 tests/overlay/049 |  2 +-
 tests/overlay/050 |  2 +-
 tests/overlay/051 |  4 ++--
 tests/overlay/052 |  2 +-
 tests/overlay/053 |  4 ++--
 tests/overlay/054 |  2 +-
 tests/overlay/055 |  4 ++--
 tests/overlay/056 |  2 +-
 tests/overlay/057 |  4 ++--
 tests/overlay/059 |  2 +-
 tests/overlay/060 |  2 +-
 tests/overlay/062 |  2 +-
 tests/overlay/063 |  2 +-
 tests/overlay/065 | 22 +++++++++++-----------
 tests/overlay/067 |  2 +-
 tests/overlay/068 |  4 ++--
 tests/overlay/069 |  6 +++---
 tests/overlay/070 |  6 +++---
 tests/overlay/071 |  6 +++---
 tests/overlay/076 |  2 +-
 tests/overlay/077 |  2 +-
 tests/overlay/078 |  2 +-
 tests/overlay/079 |  2 +-
 tests/overlay/080 |  2 +-
 tests/overlay/081 | 14 +++++++-------
 tests/overlay/083 |  2 +-
 tests/overlay/084 | 10 +++++-----
 tests/overlay/085 |  2 +-
 tests/overlay/086 |  8 ++++----
 73 files changed, 153 insertions(+), 153 deletions(-)

diff --git a/tests/btrfs/020 b/tests/btrfs/020
index 7e5c6fd7b..badb76f75 100755
--- a/tests/btrfs/020
+++ b/tests/btrfs/020
@@ -17,7 +17,7 @@ _cleanup()
 {
 	cd /
 	rm -f $tmp.*
-	$UMOUNT_PROG $loop_mnt
+	_unmount $loop_mnt
 	_destroy_loop_device $loop_dev1
 	losetup -d $loop_dev2 >/dev/null 2>&1
 	_destroy_loop_device $loop_dev3
diff --git a/tests/btrfs/029 b/tests/btrfs/029
index c37ad63fb..1f8201af3 100755
--- a/tests/btrfs/029
+++ b/tests/btrfs/029
@@ -74,7 +74,7 @@ cp --reflink=always $orig_file $copy_file >> $seqres.full 2>&1 || echo "cp refli
 md5sum $orig_file | _filter_testdir_and_scratch
 md5sum $copy_file | _filter_testdir_and_scratch
 
-$UMOUNT_PROG $reflink_test_dir
+_unmount $reflink_test_dir
 
 # success, all done
 status=0
diff --git a/tests/btrfs/031 b/tests/btrfs/031
index 8ac73d3a8..12ad84c64 100755
--- a/tests/btrfs/031
+++ b/tests/btrfs/031
@@ -99,7 +99,7 @@ mv $testdir2/file* $subvol2/
 echo "Verify the file contents:"
 _checksum_files
 
-$UMOUNT_PROG $cross_mount_test_dir
+_unmount $cross_mount_test_dir
 
 # success, all done
 status=0
diff --git a/tests/btrfs/060 b/tests/btrfs/060
index 21f15ec89..fff9bed81 100755
--- a/tests/btrfs/060
+++ b/tests/btrfs/060
@@ -76,7 +76,7 @@ run_test()
 	fi
 
 	# in case the subvolume is still mounted
-	$UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
+	_unmount $subvol_mnt >/dev/null 2>&1
 	_scratch_unmount
 	# we called _require_scratch_nocheck instead of _require_scratch
 	# do check after test for each profile config
diff --git a/tests/btrfs/065 b/tests/btrfs/065
index f0c9ffb04..77ec89038 100755
--- a/tests/btrfs/065
+++ b/tests/btrfs/065
@@ -84,7 +84,7 @@ run_test()
 	fi
 
 	# in case the subvolume is still mounted
-	$UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
+	_unmount $subvol_mnt >/dev/null 2>&1
 	_scratch_unmount
 	# we called _require_scratch_nocheck instead of _require_scratch
 	# do check after test for each profile config
diff --git a/tests/btrfs/066 b/tests/btrfs/066
index e3a083b94..07ed799a5 100755
--- a/tests/btrfs/066
+++ b/tests/btrfs/066
@@ -76,7 +76,7 @@ run_test()
 	fi
 
 	# in case the subvolume is still mounted
-	$UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
+	_unmount $subvol_mnt >/dev/null 2>&1
 	_scratch_unmount
 	# we called _require_scratch_nocheck instead of _require_scratch
 	# do check after test for each profile config
diff --git a/tests/btrfs/067 b/tests/btrfs/067
index 768993116..17c772d04 100755
--- a/tests/btrfs/067
+++ b/tests/btrfs/067
@@ -77,7 +77,7 @@ run_test()
 	fi
 
 	# in case the subvolume is still mounted
-	$UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
+	_unmount $subvol_mnt >/dev/null 2>&1
 	_scratch_unmount
 	# we called _require_scratch_nocheck instead of _require_scratch
 	# do check after test for each profile config
diff --git a/tests/btrfs/068 b/tests/btrfs/068
index 3d221259f..37b6b6ba8 100755
--- a/tests/btrfs/068
+++ b/tests/btrfs/068
@@ -77,7 +77,7 @@ run_test()
 	fi
 
 	# in case the subvolume is still mounted
-	$UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
+	_unmount $subvol_mnt >/dev/null 2>&1
 	_scratch_unmount
 	# we called _require_scratch_nocheck instead of _require_scratch
 	# do check after test for each profile config
diff --git a/tests/btrfs/075 b/tests/btrfs/075
index 917993ca2..328dc5f68 100755
--- a/tests/btrfs/075
+++ b/tests/btrfs/075
@@ -15,7 +15,7 @@ _cleanup()
 {
 	cd /
 	rm -f $tmp.*
-	$UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
+	_unmount $subvol_mnt >/dev/null 2>&1
 }
 
 . ./common/filter
diff --git a/tests/btrfs/089 b/tests/btrfs/089
index 8f8e37b6f..8c06535d9 100755
--- a/tests/btrfs/089
+++ b/tests/btrfs/089
@@ -35,7 +35,7 @@ mount --bind "$SCRATCH_MNT/testvol/testdir" "$SCRATCH_MNT/testvol/mnt"
 $BTRFS_UTIL_PROG subvolume delete "$SCRATCH_MNT/testvol" >>$seqres.full 2>&1
 
 # Unmount the bind mount, which should still be alive.
-$UMOUNT_PROG "$SCRATCH_MNT/testvol/mnt"
+_unmount "$SCRATCH_MNT/testvol/mnt"
 
 echo "Silence is golden"
 status=0
diff --git a/tests/btrfs/124 b/tests/btrfs/124
index af079c286..7c33a8fab 100755
--- a/tests/btrfs/124
+++ b/tests/btrfs/124
@@ -132,7 +132,7 @@ if [ "$checkpoint1" != "$checkpoint3" ]; then
 	echo "Inital sum does not match with data on dev2 written by balance"
 fi
 
-$UMOUNT_PROG $dev2
+_unmount $dev2
 _scratch_dev_pool_put
 _btrfs_rescan_devices
 _test_mount
diff --git a/tests/btrfs/125 b/tests/btrfs/125
index c8c0dd422..790f35d55 100755
--- a/tests/btrfs/125
+++ b/tests/btrfs/125
@@ -144,7 +144,7 @@ if [ "$checkpoint1" != "$checkpoint3" ]; then
 	echo "Inital sum does not match with data on dev2 written by balance"
 fi
 
-$UMOUNT_PROG $dev2
+_unmount $dev2
 _scratch_dev_pool_put
 _btrfs_rescan_devices
 _test_mount
diff --git a/tests/btrfs/185 b/tests/btrfs/185
index 8d0643450..f52608852 100755
--- a/tests/btrfs/185
+++ b/tests/btrfs/185
@@ -15,7 +15,7 @@ mnt=$TEST_DIR/$seq.mnt
 # Override the default cleanup function.
 _cleanup()
 {
-	$UMOUNT_PROG $mnt > /dev/null 2>&1
+	_unmount $mnt > /dev/null 2>&1
 	rm -rf $mnt > /dev/null 2>&1
 	cd /
 	rm -f $tmp.*
@@ -62,7 +62,7 @@ $BTRFS_UTIL_PROG device scan $device_1 >> $seqres.full 2>&1
 	_fail "if it fails here, then it means subvolume mount at boot may fail "\
 	      "in some configs."
 
-$UMOUNT_PROG $mnt > /dev/null 2>&1
+_unmount $mnt > /dev/null 2>&1
 _scratch_dev_pool_put
 
 # success, all done
diff --git a/tests/btrfs/197 b/tests/btrfs/197
index 9f1d879a4..111589913 100755
--- a/tests/btrfs/197
+++ b/tests/btrfs/197
@@ -15,7 +15,7 @@ _begin_fstest auto quick volume
 # Override the default cleanup function.
 _cleanup()
 {
-	$UMOUNT_PROG $TEST_DIR/$seq.mnt >/dev/null 2>&1
+	_unmount $TEST_DIR/$seq.mnt >/dev/null 2>&1
 	rm -rf $TEST_DIR/$seq.mnt
 	cd /
 	rm -f $tmp.*
@@ -67,7 +67,7 @@ workout()
 	grep -q "${SCRATCH_DEV_NAME[1]}" $tmp.output && _fail "found stale device"
 
 	$BTRFS_UTIL_PROG device remove "${SCRATCH_DEV_NAME[1]}" "$TEST_DIR/$seq.mnt"
-	$UMOUNT_PROG $TEST_DIR/$seq.mnt
+	_unmount $TEST_DIR/$seq.mnt
 	_scratch_unmount
 	_spare_dev_put
 	_scratch_dev_pool_put
diff --git a/tests/btrfs/219 b/tests/btrfs/219
index 052f61a39..58384957e 100755
--- a/tests/btrfs/219
+++ b/tests/btrfs/219
@@ -21,8 +21,8 @@ _cleanup()
 	rm -f $tmp.*
 
 	# The variables are set before the test case can fail.
-	$UMOUNT_PROG ${loop_mnt1} &> /dev/null
-	$UMOUNT_PROG ${loop_mnt2} &> /dev/null
+	_unmount ${loop_mnt1} &> /dev/null
+	_unmount ${loop_mnt2} &> /dev/null
 	rm -rf $loop_mnt1
 	rm -rf $loop_mnt2
 
@@ -66,7 +66,7 @@ loop_dev2=`_create_loop_device $fs_img2`
 # Normal single device case, should pass just fine
 _mount $loop_dev1 $loop_mnt1 > /dev/null  2>&1 || \
 	_fail "Couldn't do initial mount"
-$UMOUNT_PROG $loop_mnt1
+_unmount $loop_mnt1
 
 _btrfs_forget_or_module_reload
 
@@ -75,15 +75,15 @@ _btrfs_forget_or_module_reload
 # measure.
 _mount $loop_dev1 $loop_mnt1 > /dev/null 2>&1 || \
 	_fail "Failed to mount the second time"
-$UMOUNT_PROG $loop_mnt1
+_unmount $loop_mnt1
 
 _mount $loop_dev2 $loop_mnt2 > /dev/null 2>&1 || \
 	_fail "We couldn't mount the old generation"
-$UMOUNT_PROG $loop_mnt2
+_unmount $loop_mnt2
 
 _mount $loop_dev1 $loop_mnt1 > /dev/null 2>&1 || \
 	_fail "Failed to mount the second time"
-$UMOUNT_PROG $loop_mnt1
+_unmount $loop_mnt1
 
 # Now try mount them at the same time, if kernel does not support
 # temp-fsid feature then mount will fail.
diff --git a/tests/btrfs/254 b/tests/btrfs/254
index d9c9eea9c..548224894 100755
--- a/tests/btrfs/254
+++ b/tests/btrfs/254
@@ -96,7 +96,7 @@ test_add_device()
 	$BTRFS_UTIL_PROG filesystem show -m $SCRATCH_MNT | \
 					_filter_btrfs_filesystem_show
 
-	$UMOUNT_PROG $seq_mnt
+	_unmount $seq_mnt
 	_scratch_unmount
 	cleanup_dmdev
 }
diff --git a/tests/btrfs/311 b/tests/btrfs/311
index 51147c59f..3161e62db 100755
--- a/tests/btrfs/311
+++ b/tests/btrfs/311
@@ -14,7 +14,7 @@ _begin_fstest auto quick subvol tempfsid
 _cleanup()
 {
 	cd /
-	$UMOUNT_PROG $mnt1 > /dev/null 2>&1
+	_unmount $mnt1 > /dev/null 2>&1
 	rm -r -f $tmp.*
 	rm -r -f $mnt1
 }
diff --git a/tests/btrfs/313 b/tests/btrfs/313
index 5a9e98dea..bf62af7b2 100755
--- a/tests/btrfs/313
+++ b/tests/btrfs/313
@@ -12,7 +12,7 @@ _begin_fstest auto quick clone tempfsid
 _cleanup()
 {
 	cd /
-	$UMOUNT_PROG $mnt1 > /dev/null 2>&1
+	_unmount $mnt1 > /dev/null 2>&1
 	rm -r -f $tmp.*
 	rm -r -f $mnt1
 }
diff --git a/tests/btrfs/314 b/tests/btrfs/314
index 76dccc41f..f3e5c504b 100755
--- a/tests/btrfs/314
+++ b/tests/btrfs/314
@@ -13,7 +13,7 @@ _begin_fstest auto quick snapshot send tempfsid
 _cleanup()
 {
 	cd /
-	$UMOUNT_PROG $tempfsid_mnt 2>/dev/null
+	_unmount $tempfsid_mnt 2>/dev/null
 	rm -r -f $tmp.*
 	rm -r -f $sendfile
 	rm -r -f $tempfsid_mnt
diff --git a/tests/btrfs/315 b/tests/btrfs/315
index e6589abec..0ea2e8b35 100755
--- a/tests/btrfs/315
+++ b/tests/btrfs/315
@@ -13,7 +13,7 @@ _begin_fstest auto quick volume seed balance tempfsid
 _cleanup()
 {
 	cd /
-	$UMOUNT_PROG $tempfsid_mnt 2>/dev/null
+	_unmount $tempfsid_mnt 2>/dev/null
 	rm -r -f $tmp.*
 	rm -r -f $tempfsid_mnt
 }
diff --git a/tests/btrfs/318 b/tests/btrfs/318
index df5a4a072..ad3040d64 100755
--- a/tests/btrfs/318
+++ b/tests/btrfs/318
@@ -22,8 +22,8 @@ _require_loop
 
 _cleanup() {
 	cd /
-	$UMOUNT_PROG $MNT
-	$UMOUNT_PROG $BIND
+	_unmount $MNT
+	_unmount $BIND
 	losetup -d $DEV0 $DEV1 $DEV2
 	rm -f $IMG0 $IMG1 $IMG2
 	rm -rf $MNT $BIND
@@ -58,7 +58,7 @@ $MKFS_BTRFS_PROG -f -msingle -dsingle $D0P1 $DEV2 >>$seqres.full 2>&1 || _fail "
 rm -rf $MNT
 mkdir -p $MNT
 _mount $D0P1 $MNT
-$UMOUNT_PROG $MNT
+_unmount $MNT
 
 # Swap the partition dev_ts. This leaves the dev_t in the cache out of date.
 $PARTED_PROG $DEV0 'rm 1' --script
diff --git a/tests/btrfs/326 b/tests/btrfs/326
index 1fc4db06b..51f769f9a 100755
--- a/tests/btrfs/326
+++ b/tests/btrfs/326
@@ -25,8 +25,8 @@ _cleanup()
 	[ -n "$mount_pid" ] && kill $mount_pid &> /dev/null
 	[ -n "$remount_pid" ] && kill $remount_pid &> /dev/null
 	wait
-	$UMOUNT_PROG "$subv1_mount" &> /dev/null
-	$UMOUNT_PROG "$subv2_mount" &> /dev/null
+	_unmount "$subv1_mount" &> /dev/null
+	_unmount "$subv2_mount" &> /dev/null
 	rm -rf -- "$subv1_mount" "$subv2_mount"
 }
 
@@ -80,7 +80,7 @@ mount_workload()
 	trap "wait; exit" SIGTERM
 	while true; do
 		_mount "$SCRATCH_DEV" "$subv2_mount"
-		$UMOUNT_PROG "$subv2_mount"
+		_unmount "$subv2_mount"
 	done
 }
 
@@ -94,12 +94,12 @@ wait
 unset remount_pid mount_pid
 
 # Subv1 is always mounted, thus the umount should never fail.
-$UMOUNT_PROG "$subv1_mount"
+_unmount "$subv1_mount"
 
 # Subv2 may have already been unmounted, so here we ignore all output.
 # This may hide some errors like -EBUSY, but the next rm line would
 # detect any still mounted subvolume so we're still safe.
-$UMOUNT_PROG "$subv2_mount" &> /dev/null
+_unmount "$subv2_mount" &> /dev/null
 
 # If above unmount, especially subv2 is not properly unmounted,
 # the rm should fail with some error message
diff --git a/tests/btrfs/330 b/tests/btrfs/330
index 92cc498f2..07de58698 100755
--- a/tests/btrfs/330
+++ b/tests/btrfs/330
@@ -48,7 +48,7 @@ echo "making sure bar allows writes"
 touch $TEST_DIR/$seq/bar/qux
 ls $TEST_DIR/$seq/bar
 
-$UMOUNT_PROG $TEST_DIR/$seq/foo
-$UMOUNT_PROG $TEST_DIR/$seq/bar
+_unmount $TEST_DIR/$seq/foo
+_unmount $TEST_DIR/$seq/bar
 
 status=0 ; exit
diff --git a/tests/ext4/032 b/tests/ext4/032
index 690fcf066..e6f8c22ba 100755
--- a/tests/ext4/032
+++ b/tests/ext4/032
@@ -63,7 +63,7 @@ ext4_online_resize()
 	fi
 	cat $tmp.resize2fs >> $seqres.full
 	echo "+++ umount fs" | tee -a $seqres.full
-	$UMOUNT_PROG ${IMG_MNT}
+	_unmount ${IMG_MNT}
 
 	echo "+++ check fs" | tee -a $seqres.full
 	_check_generic_filesystem $LOOP_DEVICE >> $seqres.full 2>&1 || \
@@ -77,7 +77,7 @@ _cleanup()
 	cd /
 	[ -n "$LOOP_DEVICE" ] && _destroy_loop_device $LOOP_DEVICE > /dev/null 2>&1
 	rm -f $tmp.*
-	$UMOUNT_PROG ${IMG_MNT} > /dev/null 2>&1
+	_unmount ${IMG_MNT} > /dev/null 2>&1
 	rm -f ${IMG_FILE} > /dev/null 2>&1
 }
 
diff --git a/tests/ext4/052 b/tests/ext4/052
index 0df8a6513..4c02f75cb 100755
--- a/tests/ext4/052
+++ b/tests/ext4/052
@@ -18,7 +18,7 @@ _cleanup()
 	cd /
 	rm -r -f $tmp.*
 	if [ ! -z "$loop_mnt" ]; then
-		$UMOUNT_PROG $loop_mnt
+		_unmount $loop_mnt
 		rm -rf $loop_mnt
 	fi
 	[ ! -z "$fs_img" ] && rm -rf $fs_img
@@ -64,7 +64,7 @@ then
     status=1
 fi
 
-$UMOUNT_PROG $loop_mnt || _fail "umount failed"
+_unmount $loop_mnt || _fail "umount failed"
 loop_mnt=
 
 $E2FSCK_PROG -fn $fs_img >> $seqres.full 2>&1 || _fail "file system corrupted"
diff --git a/tests/ext4/053 b/tests/ext4/053
index 5922ed571..3e2cda099 100755
--- a/tests/ext4/053
+++ b/tests/ext4/053
@@ -20,7 +20,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
 _cleanup()
 {
 	cd /
-	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+	_unmount $SCRATCH_MNT > /dev/null 2>&1
 	if [ -n "$LOOP_LOGDEV" ];then
 		_destroy_loop_device $LOOP_LOGDEV 2>/dev/null
 	fi
@@ -236,7 +236,7 @@ not_mnt() {
 	if simple_mount -o $1 $SCRATCH_DEV $SCRATCH_MNT; then
 		print_log "(mount unexpectedly succeeded)"
 		fail
-		$UMOUNT_PROG $SCRATCH_MNT
+		_unmount $SCRATCH_MNT
 		return
 	fi
 	ok
@@ -247,7 +247,7 @@ not_mnt() {
 		return
 	fi
 	not_remount $1
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 mnt_only() {
@@ -269,7 +269,7 @@ mnt() {
 	fi
 
 	mnt_only $*
-	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+	_unmount $SCRATCH_MNT 2> /dev/null
 
 	[ "$t2fs" -eq 0 ] && return
 
@@ -288,7 +288,7 @@ mnt() {
 				    -e 's/data=writeback/journal_data_writeback/')
 	$TUNE2FS_PROG -o $op_set $SCRATCH_DEV > /dev/null 2>&1
 	mnt_only "defaults" $check
-	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+	_unmount $SCRATCH_MNT 2> /dev/null
 	if [ "$op_set" = ^* ]; then
 		op_set=${op_set#^}
 	else
@@ -308,12 +308,12 @@ remount() {
 	do_mnt remount,$2 $3
 	if [ $? -ne 0 ]; then
 		fail
-		$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+		_unmount $SCRATCH_MNT 2> /dev/null
 		return
 	else
 		ok
 	fi
-	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+	_unmount $SCRATCH_MNT 2> /dev/null
 
 	# Now just specify mnt
 	print_log "mounting $fstype \"$1\" "
@@ -327,7 +327,7 @@ remount() {
 		ok
 	fi
 
-	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+	_unmount $SCRATCH_MNT 2> /dev/null
 }
 
 # Test that the filesystem cannot be remounted with option(s) $1 (meaning that
@@ -363,7 +363,7 @@ mnt_then_not_remount() {
 		return
 	fi
 	not_remount $2
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 
@@ -399,8 +399,8 @@ LOGDEV_DEVNUM=`echo "${majmin%:*}*2^8 + ${majmin#*:}" | bc`
 fstype=
 for fstype in ext2 ext3 ext4; do
 
-	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
-	$UMOUNT_PROG $SCRATCH_DEV 2> /dev/null
+	_unmount $SCRATCH_MNT 2> /dev/null
+	_unmount $SCRATCH_DEV 2> /dev/null
 
 	do_mkfs $SCRATCH_DEV ${SIZE}k
 
@@ -417,7 +417,7 @@ for fstype in ext2 ext3 ext4; do
 		continue
 	fi
 
-	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+	_unmount $SCRATCH_MNT 2> /dev/null
 
 	not_mnt failme
 	mnt
@@ -551,7 +551,7 @@ for fstype in ext2 ext3 ext4; do
 	# dax mount options
 	simple_mount -o dax=always $SCRATCH_DEV $SCRATCH_MNT > /dev/null 2>&1
 	if [ $? -eq 0 ]; then
-		$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+		_unmount $SCRATCH_MNT 2> /dev/null
 		mnt dax
 		mnt dax=always
 		mnt dax=never
@@ -632,7 +632,7 @@ for fstype in ext2 ext3 ext4; do
 	not_remount jqfmt=vfsv1
 	not_remount noquota
 	mnt_only remount,usrquota,grpquota ^usrquota,^grpquota
-	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+	_unmount $SCRATCH_MNT > /dev/null 2>&1
 
 	# test clearing/changing quota when enabled
 	do_mkfs -E quotatype=^prjquota $SCRATCH_DEV ${SIZE}k
@@ -653,7 +653,7 @@ for fstype in ext2 ext3 ext4; do
 	mnt_only remount,usrquota,grpquota usrquota,grpquota
 	quotaoff -f $SCRATCH_MNT >> $seqres.full 2>&1
 	mnt_only remount,noquota ^usrquota,^grpquota,quota
-	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+	_unmount $SCRATCH_MNT > /dev/null 2>&1
 
 	# Quota feature
 	echo "== Testing quota feature " >> $seqres.full
@@ -695,7 +695,7 @@ for fstype in ext2 ext3 ext4; do
 
 done #for fstype in ext2 ext3 ext4; do
 
-$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+_unmount $SCRATCH_MNT > /dev/null 2>&1
 echo "$ERR errors encountered" >> $seqres.full
 
 status=$ERR
diff --git a/tests/ext4/056 b/tests/ext4/056
index fb5bbe93e..d22aebfa6 100755
--- a/tests/ext4/056
+++ b/tests/ext4/056
@@ -72,7 +72,7 @@ do_resize()
 	# delay
 	sleep 0.2
 	_scratch_unmount >> $seqres.full 2>&1 \
-		|| _fail "$UMOUNT_PROG failed. Exiting"
+		|| _fail "_unmount failed. Exiting"
 }
 
 run_test()
diff --git a/tests/overlay/003 b/tests/overlay/003
index 41ad99e79..0b5660b8e 100755
--- a/tests/overlay/003
+++ b/tests/overlay/003
@@ -56,7 +56,7 @@ rm -rf ${SCRATCH_MNT}/*
 ls ${SCRATCH_MNT}/
 
 # unmount overlayfs but not base fs
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 echo "Silence is golden"
 # success, all done
diff --git a/tests/overlay/004 b/tests/overlay/004
index bea4bb543..e97e9ddd9 100755
--- a/tests/overlay/004
+++ b/tests/overlay/004
@@ -53,7 +53,7 @@ _user_do "chmod u-X ${SCRATCH_MNT}/attr_file2 > /dev/null 2>&1"
 stat -c %a ${SCRATCH_MNT}/attr_file2
 
 # unmount overlayfs but not base fs
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # check mode bits of the file that has been copied up, and
 # the file that should not have been copied up.
diff --git a/tests/overlay/005 b/tests/overlay/005
index 4c11d5e1b..1495999b7 100755
--- a/tests/overlay/005
+++ b/tests/overlay/005
@@ -75,14 +75,14 @@ $XFS_IO_PROG -f -c "o" ${SCRATCH_MNT}/test_file \
 	>>$seqres.full 2>&1
 
 # unmount overlayfs
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # check overlayfs
 _overlay_check_scratch_dirs $lowerd $upperd $workd
 
 # unmount undelying xfs, this tiggers panic if memleak happens
-$UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/uppermnt
-$UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/lowermnt
+_unmount ${OVL_BASE_SCRATCH_MNT}/uppermnt
+_unmount ${OVL_BASE_SCRATCH_MNT}/lowermnt
 
 # success, all done
 echo "Silence is golden"
diff --git a/tests/overlay/014 b/tests/overlay/014
index f07fc6855..aeb1467a7 100755
--- a/tests/overlay/014
+++ b/tests/overlay/014
@@ -46,7 +46,7 @@ _overlay_scratch_mount_dirs $lowerdir1 $lowerdir2 $workdir2
 rm -rf $SCRATCH_MNT/testdir
 mkdir -p $SCRATCH_MNT/testdir/visibledir
 # unmount overlayfs but not base fs
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # check overlayfs
 _overlay_check_scratch_dirs $lowerdir1 $lowerdir2 $workdir2
@@ -59,7 +59,7 @@ touch $SCRATCH_MNT/testdir/visiblefile
 
 # umount and mount overlay again, buggy kernel treats the copied-up dir as
 # opaque, visibledir is not seen in merged dir.
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 _overlay_scratch_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
 ls $SCRATCH_MNT/testdir
 
diff --git a/tests/overlay/022 b/tests/overlay/022
index d33bd2978..8b26a2cd0 100755
--- a/tests/overlay/022
+++ b/tests/overlay/022
@@ -17,7 +17,7 @@ _begin_fstest auto quick mount nested
 _cleanup()
 {
 	cd /
-	$UMOUNT_PROG $tmp/mnt > /dev/null 2>&1
+	_unmount $tmp/mnt > /dev/null 2>&1
 	rm -rf $tmp
 	rm -f $tmp.*
 }
diff --git a/tests/overlay/025 b/tests/overlay/025
index dc819a393..3b6cf987b 100755
--- a/tests/overlay/025
+++ b/tests/overlay/025
@@ -19,8 +19,8 @@ _begin_fstest auto quick attr
 _cleanup()
 {
 	cd /
-	$UMOUNT_PROG $tmpfsdir/mnt
-	$UMOUNT_PROG $tmpfsdir
+	_unmount $tmpfsdir/mnt
+	_unmount $tmpfsdir
 	rm -rf $tmpfsdir
 	rm -f $tmp.*
 }
diff --git a/tests/overlay/029 b/tests/overlay/029
index 4bade9a0e..b0ed7285f 100755
--- a/tests/overlay/029
+++ b/tests/overlay/029
@@ -22,7 +22,7 @@ _begin_fstest auto quick nested
 _cleanup()
 {
 	cd /
-	$UMOUNT_PROG $tmp/mnt
+	_unmount $tmp/mnt
 	rm -rf $tmp
 	rm -f $tmp.*
 }
@@ -56,7 +56,7 @@ _overlay_mount_dirs $SCRATCH_MNT/up $tmp/{upper,work} \
   overlay $tmp/mnt
 # accessing file in the second mount
 cat $tmp/mnt/foo
-$UMOUNT_PROG $tmp/mnt
+_unmount $tmp/mnt
 
 # re-create upper/work to avoid ovl_verify_origin() mount failure
 # when index is enabled
@@ -66,7 +66,7 @@ mkdir -p $tmp/{upper,work}
 _overlay_mount_dirs $SCRATCH_MNT/low $tmp/{upper,work} \
   overlay $tmp/mnt
 cat $tmp/mnt/bar
-$UMOUNT_PROG $tmp/mnt
+_unmount $tmp/mnt
 
 rm -rf $tmp/{upper,work}
 mkdir -p $tmp/{upper,work}
diff --git a/tests/overlay/031 b/tests/overlay/031
index dd9dfcdb9..88299ebe2 100755
--- a/tests/overlay/031
+++ b/tests/overlay/031
@@ -28,7 +28,7 @@ create_whiteout()
 
 	rm -f $SCRATCH_MNT/testdir/$file
 
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 # Import common functions.
@@ -68,7 +68,7 @@ rm -rf $SCRATCH_MNT/testdir 2>&1 | _filter_scratch
 
 # umount overlay again, create a new file with the same name and
 # mount overlay again.
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 touch $lowerdir1/testdir
 
 _overlay_scratch_mount_dirs $lowerdir1 $upperdir $workdir
@@ -77,7 +77,7 @@ _overlay_scratch_mount_dirs $lowerdir1 $upperdir $workdir
 # it will not clean up the dir and lead to residue.
 rm -rf $SCRATCH_MNT/testdir 2>&1 | _filter_scratch
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # let lower dir have invalid whiteouts, repeat ls and rmdir test again.
 rm -rf $lowerdir1/testdir
@@ -92,7 +92,7 @@ _overlay_scratch_mount_dirs "$lowerdir1:$lowerdir2" $upperdir $workdir
 ls $SCRATCH_MNT/testdir
 rm -rf $SCRATCH_MNT/testdir 2>&1 | _filter_scratch
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # let lower dir and upper dir both have invalid whiteouts, repeat ls and rmdir again.
 rm -rf $lowerdir1/testdir
diff --git a/tests/overlay/035 b/tests/overlay/035
index 0b3257c4c..14e62ca2e 100755
--- a/tests/overlay/035
+++ b/tests/overlay/035
@@ -43,7 +43,7 @@ mkdir -p $lowerdir1 $lowerdir2 $upperdir $workdir
 _overlay_scratch_mount_opts -o"lowerdir=$lowerdir2:$lowerdir1"
 touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
 $MOUNT_PROG -o remount,rw $SCRATCH_MNT 2>&1 | _filter_ro_mount
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # Make workdir immutable to prevent workdir re-create on mount
 $CHATTR_PROG +i $workdir
diff --git a/tests/overlay/036 b/tests/overlay/036
index 19a181bbd..d94a86c49 100755
--- a/tests/overlay/036
+++ b/tests/overlay/036
@@ -34,8 +34,8 @@ _cleanup()
 	cd /
 	rm -f $tmp.*
 	# unmount the two extra mounts in case they did not fail
-	$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
-	$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+	_unmount $SCRATCH_MNT 2>/dev/null
+	_unmount $SCRATCH_MNT 2>/dev/null
 }
 
 # Import common functions.
@@ -66,13 +66,13 @@ _overlay_mount_dirs $lowerdir $upperdir $workdir \
 # with index=off - expect success
 _overlay_mount_dirs $lowerdir $upperdir $workdir2 \
 		    overlay0 $SCRATCH_MNT -oindex=off && \
-		    $UMOUNT_PROG $SCRATCH_MNT
+		    _unmount $SCRATCH_MNT
 
 # Try to mount another overlay with the same workdir
 # with index=off - expect success
 _overlay_mount_dirs $lowerdir2 $upperdir2 $workdir \
 		    overlay1 $SCRATCH_MNT -oindex=off && \
-		    $UMOUNT_PROG $SCRATCH_MNT
+		    _unmount $SCRATCH_MNT
 
 # Try to mount another overlay with the same upperdir
 # with index=on - expect EBUSY
diff --git a/tests/overlay/037 b/tests/overlay/037
index 834e17638..70aecb065 100755
--- a/tests/overlay/037
+++ b/tests/overlay/037
@@ -39,17 +39,17 @@ mkdir -p $lowerdir $lowerdir2 $upperdir $upperdir2 $workdir
 # Mount overlay with lowerdir, upperdir, workdir and index=on
 # to store the file handles of lowerdir and upperdir in overlay.origin xattr
 _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -oindex=on
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # Try to mount an overlay with the same upperdir and different lowerdir - expect ESTALE
 _overlay_scratch_mount_dirs $lowerdir2 $upperdir $workdir -oindex=on \
 	2>&1 | _filter_error_mount
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 # Try to mount an overlay with the same workdir and different upperdir - expect ESTALE
 _overlay_scratch_mount_dirs $lowerdir $upperdir2 $workdir -oindex=on \
 	2>&1 | _filter_error_mount
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 # Mount overlay with original lowerdir, upperdir, workdir and index=on - expect success
 _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -oindex=on
diff --git a/tests/overlay/040 b/tests/overlay/040
index 11c7bf129..aeb4cdc93 100755
--- a/tests/overlay/040
+++ b/tests/overlay/040
@@ -48,7 +48,7 @@ _scratch_mount
 # modify lower origin file.
 $CHATTR_PROG +i $SCRATCH_MNT/foo > /dev/null 2>&1
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # touching origin file in lower, should succeed
 touch $lowerdir/foo
diff --git a/tests/overlay/041 b/tests/overlay/041
index 36491b8fa..3517d3652 100755
--- a/tests/overlay/041
+++ b/tests/overlay/041
@@ -142,7 +142,7 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
 [[ $subdir_d == "subdir d" ]] || \
 	echo "Merged dir: Invalid d_ino reported for subdir"
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # check overlayfs
 _overlay_check_scratch_dirs $lowerdir $upperdir $workdir -o xino=on
diff --git a/tests/overlay/042 b/tests/overlay/042
index aaa10da33..538b87ef9 100755
--- a/tests/overlay/042
+++ b/tests/overlay/042
@@ -45,7 +45,7 @@ _scratch_mount -o index=off
 # Copy up lower and create upper hardlink with no index
 ln $SCRATCH_MNT/0 $SCRATCH_MNT/1
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # Add lower hardlinks while overlay is offline
 ln $lowerdir/0 $lowerdir/2
diff --git a/tests/overlay/043 b/tests/overlay/043
index 7325c653a..1683738d7 100755
--- a/tests/overlay/043
+++ b/tests/overlay/043
@@ -126,7 +126,7 @@ echo 3 > /proc/sys/vm/drop_caches
 check_inode_numbers $testdir $tmp.after_copyup $tmp.after_move
 
 # Verify that the inode numbers survive a mount cycle
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -o redirect_dir=on,xino=on
 
 # Compare inode numbers before/after mount cycle
diff --git a/tests/overlay/044 b/tests/overlay/044
index 4d04d883e..e19613c1c 100755
--- a/tests/overlay/044
+++ b/tests/overlay/044
@@ -99,7 +99,7 @@ cat $FILES
 check_ino_nlink $SCRATCH_MNT $tmp.before $tmp.after_one
 
 # Verify that the hardlinks survive a mount cycle
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 _overlay_check_scratch_dirs $lowerdir $upperdir $workdir -o index=on,xino=on
 _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -o index=on,xino=on
 
diff --git a/tests/overlay/048 b/tests/overlay/048
index 897e797e2..3de1fa795 100755
--- a/tests/overlay/048
+++ b/tests/overlay/048
@@ -32,7 +32,7 @@ report_nlink()
 		_ls_l $SCRATCH_MNT/$f | awk '{ print $2, $9 }' | _filter_scratch
 	done
 
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 # Create lower hardlinks
@@ -101,7 +101,7 @@ touch $SCRATCH_MNT/1
 touch $SCRATCH_MNT/2
 
 # Perform the rest of the changes offline
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 test_hardlinks_offline
 
diff --git a/tests/overlay/049 b/tests/overlay/049
index 3ee500c5d..c7f93cb93 100755
--- a/tests/overlay/049
+++ b/tests/overlay/049
@@ -32,7 +32,7 @@ create_redirect()
 	touch $SCRATCH_MNT/origin/file
 	mv $SCRATCH_MNT/origin $SCRATCH_MNT/$redirect
 
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 # Import common functions.
diff --git a/tests/overlay/050 b/tests/overlay/050
index ec936e2a7..bff002286 100755
--- a/tests/overlay/050
+++ b/tests/overlay/050
@@ -76,7 +76,7 @@ mount_dirs()
 # Unmount the overlay without unmounting base fs
 unmount_dirs()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 # Check non-stale file handles of lower/upper files and verify
diff --git a/tests/overlay/051 b/tests/overlay/051
index 9404dbbab..d99d19678 100755
--- a/tests/overlay/051
+++ b/tests/overlay/051
@@ -28,7 +28,7 @@ _cleanup()
 	# Cleanup overlay scratch mount that is holding base test mount
 	# to prevent _check_test_fs and _test_umount from failing before
 	# _check_scratch_fs _scratch_umount
-	$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+	_unmount $SCRATCH_MNT 2>/dev/null
 }
 
 # Import common functions.
@@ -103,7 +103,7 @@ mount_dirs()
 # underlying dirs
 unmount_dirs()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 
 	_overlay_check_scratch_dirs $middle:$lower $upper $work \
 				-o "index=on,nfs_export=on"
diff --git a/tests/overlay/052 b/tests/overlay/052
index 37402067d..9b53cd78a 100755
--- a/tests/overlay/052
+++ b/tests/overlay/052
@@ -73,7 +73,7 @@ mount_dirs()
 # Unmount the overlay without unmounting base fs
 unmount_dirs()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 # Check non-stale file handles of lower/upper moved files
diff --git a/tests/overlay/053 b/tests/overlay/053
index f7891aced..13a4873ee 100755
--- a/tests/overlay/053
+++ b/tests/overlay/053
@@ -30,7 +30,7 @@ _cleanup()
 	# Cleanup overlay scratch mount that is holding base test mount
 	# to prevent _check_test_fs and _test_umount from failing before
 	# _check_scratch_fs _scratch_umount
-	$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+	_unmount $SCRATCH_MNT 2>/dev/null
 }
 
 # Import common functions.
@@ -99,7 +99,7 @@ mount_dirs()
 # underlying dirs
 unmount_dirs()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 
 	_overlay_check_scratch_dirs $middle:$lower $upper $work \
 				-o "index=on,nfs_export=on,redirect_dir=on"
diff --git a/tests/overlay/054 b/tests/overlay/054
index 8d7f026a2..260c95d50 100755
--- a/tests/overlay/054
+++ b/tests/overlay/054
@@ -87,7 +87,7 @@ mount_dirs()
 # Unmount the overlay without unmounting base fs
 unmount_dirs()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 # Check encode/decode/read file handles of dir with non-indexed ancestor
diff --git a/tests/overlay/055 b/tests/overlay/055
index 87a348c94..84ce631f0 100755
--- a/tests/overlay/055
+++ b/tests/overlay/055
@@ -37,7 +37,7 @@ _cleanup()
 	# Cleanup overlay scratch mount that is holding base test mount
 	# to prevent _check_test_fs and _test_umount from failing before
 	# _check_scratch_fs _scratch_umount
-	$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+	_unmount $SCRATCH_MNT 2>/dev/null
 }
 
 # Import common functions.
@@ -109,7 +109,7 @@ mount_dirs()
 # underlying dirs
 unmount_dirs()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 
 	_overlay_check_scratch_dirs $middle:$lower $upper $work \
 				-o "index=on,nfs_export=on,redirect_dir=on"
diff --git a/tests/overlay/056 b/tests/overlay/056
index 158f34d05..72da81fe0 100755
--- a/tests/overlay/056
+++ b/tests/overlay/056
@@ -73,7 +73,7 @@ mkdir $lowerdir/testdir2/subdir
 _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir
 touch $SCRATCH_MNT/testdir1/foo
 touch $SCRATCH_MNT/testdir2/subdir
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 remove_impure $upperdir/testdir1
 remove_impure $upperdir/testdir2
 
diff --git a/tests/overlay/057 b/tests/overlay/057
index da7ffda30..325675d54 100755
--- a/tests/overlay/057
+++ b/tests/overlay/057
@@ -48,7 +48,7 @@ _overlay_scratch_mount_dirs $lowerdir $lowerdir2 $workdir2 -o redirect_dir=on
 # Create opaque parent with absolute redirect child in middle layer
 mkdir $SCRATCH_MNT/pure
 mv $SCRATCH_MNT/origin $SCRATCH_MNT/pure/redirect
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 _overlay_scratch_mount_dirs $lowerdir2:$lowerdir $upperdir $workdir -o redirect_dir=on
 mv $SCRATCH_MNT/pure/redirect $SCRATCH_MNT/redirect
 # List content of renamed merge dir before mount cycle
@@ -56,7 +56,7 @@ ls $SCRATCH_MNT/redirect/
 
 # Verify that redirects are followed by listing content of renamed merge dir
 # after mount cycle
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 _overlay_scratch_mount_dirs $lowerdir2:$lowerdir $upperdir $workdir -o redirect_dir=on
 ls $SCRATCH_MNT/redirect/
 
diff --git a/tests/overlay/059 b/tests/overlay/059
index c48d2a82c..9b9263c09 100755
--- a/tests/overlay/059
+++ b/tests/overlay/059
@@ -33,7 +33,7 @@ create_origin_ref()
 	_scratch_mount -o redirect_dir=on
 	mv $SCRATCH_MNT/origin $SCRATCH_MNT/$ref
 
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 # Import common functions.
diff --git a/tests/overlay/060 b/tests/overlay/060
index bb61fcfa6..05dab179d 100755
--- a/tests/overlay/060
+++ b/tests/overlay/060
@@ -130,7 +130,7 @@ mount_ro_overlay()
 
 umount_overlay()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 # Assumes it is called with overlay mounted.
diff --git a/tests/overlay/062 b/tests/overlay/062
index e44628b74..4290fbc85 100755
--- a/tests/overlay/062
+++ b/tests/overlay/062
@@ -18,7 +18,7 @@ _cleanup()
 {
 	cd /
 	rm -f $tmp.*
-	$UMOUNT_PROG $lowertestdir
+	_unmount $lowertestdir
 }
 
 # Import common functions.
diff --git a/tests/overlay/063 b/tests/overlay/063
index d9f30606a..b0468cd58 100755
--- a/tests/overlay/063
+++ b/tests/overlay/063
@@ -40,7 +40,7 @@ rm ${upperdir}/file
 mkdir ${SCRATCH_MNT}/file > /dev/null 2>&1
 
 # unmount overlayfs
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 echo "Silence is golden"
 # success, all done
diff --git a/tests/overlay/065 b/tests/overlay/065
index fb6d6dd1b..08ada3242 100755
--- a/tests/overlay/065
+++ b/tests/overlay/065
@@ -30,7 +30,7 @@ _cleanup()
 {
 	cd /
 	rm -f $tmp.*
-	$UMOUNT_PROG $mnt2 2>/dev/null
+	_unmount $mnt2 2>/dev/null
 }
 
 # Import common functions.
@@ -63,7 +63,7 @@ mkdir -p $lowerdir/lower $upperdir $workdir
 echo Conflicting upperdir/lowerdir
 _overlay_scratch_mount_dirs $upperdir $upperdir $workdir \
 	2>&1 | _filter_error_mount
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 # Use new upper/work dirs for each test to avoid ESTALE errors
 # on mismatch lowerdir/upperdir (see test overlay/037)
@@ -75,7 +75,7 @@ mkdir $upperdir $workdir
 echo Conflicting workdir/lowerdir
 _overlay_scratch_mount_dirs $workdir $upperdir $workdir \
 	-oindex=off 2>&1 | _filter_error_mount
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 rm -rf $upperdir $workdir
 mkdir -p $upperdir/lower $workdir
@@ -85,7 +85,7 @@ mkdir -p $upperdir/lower $workdir
 echo Overlapping upperdir/lowerdir
 _overlay_scratch_mount_dirs $upperdir/lower $upperdir $workdir \
 	2>&1 | _filter_error_mount
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 rm -rf $upperdir $workdir
 mkdir $upperdir $workdir
@@ -94,7 +94,7 @@ mkdir $upperdir $workdir
 echo Conflicting lower layers
 _overlay_scratch_mount_dirs $lowerdir:$lowerdir $upperdir $workdir \
 	2>&1 | _filter_error_mount
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 rm -rf $upperdir $workdir
 mkdir $upperdir $workdir
@@ -103,7 +103,7 @@ mkdir $upperdir $workdir
 echo Overlapping lower layers below
 _overlay_scratch_mount_dirs $lowerdir:$lowerdir/lower $upperdir $workdir \
 	2>&1 | _filter_error_mount
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 rm -rf $upperdir $workdir
 mkdir $upperdir $workdir
@@ -112,7 +112,7 @@ mkdir $upperdir $workdir
 echo Overlapping lower layers above
 _overlay_scratch_mount_dirs $lowerdir/lower:$lowerdir $upperdir $workdir \
 	2>&1 | _filter_error_mount
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 rm -rf $upperdir $workdir
 mkdir -p $upperdir/upper $workdir $mnt2
@@ -129,14 +129,14 @@ mkdir -p $upperdir2 $workdir2 $mnt2
 echo "Overlapping with upperdir of another instance (index=on)"
 _overlay_scratch_mount_dirs $upperdir/upper $upperdir2 $workdir2 \
 	-oindex=on 2>&1 | _filter_busy_mount
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 rm -rf $upperdir2 $workdir2
 mkdir -p $upperdir2 $workdir2
 
 echo "Overlapping with upperdir of another instance (index=off)"
 _overlay_scratch_mount_dirs $upperdir/upper $upperdir2 $workdir2 \
-	-oindex=off && $UMOUNT_PROG $SCRATCH_MNT
+	-oindex=off && _unmount $SCRATCH_MNT
 
 rm -rf $upperdir2 $workdir2
 mkdir -p $upperdir2 $workdir2
@@ -146,14 +146,14 @@ mkdir -p $upperdir2 $workdir2
 echo "Overlapping with workdir of another instance (index=on)"
 _overlay_scratch_mount_dirs $workdir/work $upperdir2 $workdir2 \
 	-oindex=on 2>&1 | _filter_busy_mount
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 rm -rf $upperdir2 $workdir2
 mkdir -p $upperdir2 $workdir2
 
 echo "Overlapping with workdir of another instance (index=off)"
 _overlay_scratch_mount_dirs $workdir/work $upperdir2 $workdir2 \
-	-oindex=off && $UMOUNT_PROG $SCRATCH_MNT
+	-oindex=off && _unmount $SCRATCH_MNT
 
 # Move upper layer root into lower layer after mount
 echo Overlapping upperdir/lowerdir after mount
diff --git a/tests/overlay/067 b/tests/overlay/067
index bb09a6042..4b57675e2 100755
--- a/tests/overlay/067
+++ b/tests/overlay/067
@@ -70,7 +70,7 @@ stat $testfile >>$seqres.full
 diff -q $realfile $testfile >>$seqres.full &&
 	echo "diff with middle layer file doesn't know right from wrong! (cold cache)"
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 # check overlayfs
 _overlay_check_scratch_dirs $middle:$lower $upper $work -o xino=off
 
diff --git a/tests/overlay/068 b/tests/overlay/068
index 0d33cf12d..66b1b49ca 100755
--- a/tests/overlay/068
+++ b/tests/overlay/068
@@ -28,7 +28,7 @@ _cleanup()
 	cd /
 	rm -f $tmp.*
 	# Unmount the nested overlay mount
-	$UMOUNT_PROG $mnt2 2>/dev/null
+	_unmount $mnt2 2>/dev/null
 }
 
 # Import common functions.
@@ -100,7 +100,7 @@ mount_dirs()
 unmount_dirs()
 {
 	# unmount & check nested overlay
-	$UMOUNT_PROG $mnt2
+	_unmount $mnt2
 	_overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
 		-o "index=on,nfs_export=on,redirect_dir=on"
 
diff --git a/tests/overlay/069 b/tests/overlay/069
index 373ab1ee3..b145ad8e2 100755
--- a/tests/overlay/069
+++ b/tests/overlay/069
@@ -28,7 +28,7 @@ _cleanup()
 	cd /
 	rm -f $tmp.*
 	# Unmount the nested overlay mount
-	$UMOUNT_PROG $mnt2 2>/dev/null
+	_unmount $mnt2 2>/dev/null
 }
 
 # Import common functions.
@@ -108,12 +108,12 @@ mount_dirs()
 unmount_dirs()
 {
 	# unmount & check nested overlay
-	$UMOUNT_PROG $mnt2
+	_unmount $mnt2
 	_overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
 		-o "index=on,nfs_export=on,redirect_dir=on"
 
 	# unmount & check underlying overlay
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 	_overlay_check_dirs $lower $upper $work \
 		-o "index=on,nfs_export=on,redirect_dir=on"
 }
diff --git a/tests/overlay/070 b/tests/overlay/070
index 36991229f..078dda417 100755
--- a/tests/overlay/070
+++ b/tests/overlay/070
@@ -26,7 +26,7 @@ _cleanup()
 	cd /
 	rm -f $tmp.*
 	# Unmount the nested overlay mount
-	$UMOUNT_PROG $mnt2 2>/dev/null
+	_unmount $mnt2 2>/dev/null
 	[ -z "$loopdev" ] || _destroy_loop_device $loopdev
 }
 
@@ -93,12 +93,12 @@ mount_dirs()
 unmount_dirs()
 {
 	# unmount & check nested overlay
-	$UMOUNT_PROG $mnt2
+	_unmount $mnt2
 	_overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
 		-o "redirect_dir=on,index=on,xino=on"
 
 	# unmount & check underlying overlay
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 	_overlay_check_scratch_dirs $lower $upper $work \
 		-o "index=on,nfs_export=on"
 }
diff --git a/tests/overlay/071 b/tests/overlay/071
index 2a6313142..1954d0cb1 100755
--- a/tests/overlay/071
+++ b/tests/overlay/071
@@ -29,7 +29,7 @@ _cleanup()
 	cd /
 	rm -f $tmp.*
 	# Unmount the nested overlay mount
-	$UMOUNT_PROG $mnt2 2>/dev/null
+	_unmount $mnt2 2>/dev/null
 	[ -z "$loopdev" ] || _destroy_loop_device $loopdev
 }
 
@@ -103,12 +103,12 @@ mount_dirs()
 unmount_dirs()
 {
 	# unmount & check nested overlay
-	$UMOUNT_PROG $mnt2
+	_unmount $mnt2
 	_overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
 		-o "redirect_dir=on,index=on,xino=on"
 
 	# unmount & check underlying overlay
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 	_overlay_check_dirs $lower $upper $work \
 		-o "index=on,nfs_export=on"
 }
diff --git a/tests/overlay/076 b/tests/overlay/076
index fb94dff68..a137ac803 100755
--- a/tests/overlay/076
+++ b/tests/overlay/076
@@ -47,7 +47,7 @@ _scratch_mount
 # on kernel v5.10..v5.10.14.  Anything but hang is considered a test success.
 $CHATTR_PROG +i $SCRATCH_MNT/foo > /dev/null 2>&1
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # success, all done
 echo "Silence is golden"
diff --git a/tests/overlay/077 b/tests/overlay/077
index 00de0825a..a322709e8 100755
--- a/tests/overlay/077
+++ b/tests/overlay/077
@@ -65,7 +65,7 @@ mv $SCRATCH_MNT/f100 $SCRATCH_MNT/former/
 
 # Remove the lower directory and mount overlay again to create
 # a "former merge dir"
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 rm -rf $lowerdir/former
 _scratch_mount
 
diff --git a/tests/overlay/078 b/tests/overlay/078
index d6df11f68..0ee9e54d9 100755
--- a/tests/overlay/078
+++ b/tests/overlay/078
@@ -61,7 +61,7 @@ do_check()
 
 	echo "Test chattr +$1 $2" >> $seqres.full
 
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 
 	# Add attribute to lower file
 	$CHATTR_PROG +$attr $lowertestfile
diff --git a/tests/overlay/079 b/tests/overlay/079
index cfcafceea..2ea9ba93b 100755
--- a/tests/overlay/079
+++ b/tests/overlay/079
@@ -156,7 +156,7 @@ mount_ro_overlay()
 
 umount_overlay()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 test_no_access()
diff --git a/tests/overlay/080 b/tests/overlay/080
index ce5c2375f..77fd8dbfe 100755
--- a/tests/overlay/080
+++ b/tests/overlay/080
@@ -264,7 +264,7 @@ mount_overlay()
 
 umount_overlay()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 
diff --git a/tests/overlay/081 b/tests/overlay/081
index 2270a0475..39eac6466 100755
--- a/tests/overlay/081
+++ b/tests/overlay/081
@@ -46,7 +46,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
 	echo "Overlayfs (uuid=null) and upper fs fsid differ"
 
 # Keep base fs mounted in case it has a volatile fsid (e.g. tmpfs)
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # Test legacy behavior is preserved by default for existing "impure" overlayfs
 _scratch_mount
@@ -55,7 +55,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
 [[ "$ovl_fsid" == "$upper_fsid" ]] || \
 	echo "Overlayfs (after uuid=null) and upper fs fsid differ"
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # Test unique fsid on explicit opt-in for existing "impure" overlayfs
 _scratch_mount -o uuid=on
@@ -65,7 +65,7 @@ ovl_unique_fsid=$ovl_fsid
 [[ "$ovl_fsid" != "$upper_fsid" ]] || \
 	echo "Overlayfs (uuid=on) and upper fs fsid are the same"
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # Test unique fsid is persistent by default after it was created
 _scratch_mount
@@ -74,7 +74,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
 [[ "$ovl_fsid" == "$ovl_unique_fsid" ]] || \
 	echo "Overlayfs (after uuid=on) unique fsid is not persistent"
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # Test ignore existing persistent fsid on explicit opt-out
 _scratch_mount -o uuid=null
@@ -83,7 +83,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
 [[ "$ovl_fsid" == "$upper_fsid" ]] || \
 	echo "Overlayfs (uuid=null) and upper fs fsid differ"
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # Test fallback to uuid=null with non-upper ovelray
 _overlay_scratch_mount_dirs "$upperdir:$lowerdir" "-" "-" -o ro,uuid=on
@@ -110,7 +110,7 @@ ovl_unique_fsid=$ovl_fsid
 [[ "$ovl_fsid" != "$upper_fsid" ]] || \
 	echo "Overlayfs (new) and upper fs fsid are the same"
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 # Test unique fsid is persistent by default after it was created
 _scratch_mount -o uuid=on
@@ -119,7 +119,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
 [[ "$ovl_fsid" == "$ovl_unique_fsid" ]] || \
 	echo "Overlayfs (uuid=on) unique fsid is not persistent"
 
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 
 echo "Silence is golden"
 status=0
diff --git a/tests/overlay/083 b/tests/overlay/083
index d037d4c85..551471d45 100755
--- a/tests/overlay/083
+++ b/tests/overlay/083
@@ -52,7 +52,7 @@ $MOUNT_PROG -t overlay | grep ovl_esc_test  | tee -a $seqres.full | grep -v spac
 
 # Re-create the upper/work dirs to mount them with a different lower
 # This is required in case index feature is enabled
-$UMOUNT_PROG $SCRATCH_MNT
+_unmount $SCRATCH_MNT
 rm -rf "$upperdir" "$workdir"
 mkdir -p "$upperdir" "$workdir"
 
diff --git a/tests/overlay/084 b/tests/overlay/084
index 28e9a76dc..d0bf06ecb 100755
--- a/tests/overlay/084
+++ b/tests/overlay/084
@@ -15,7 +15,7 @@ _cleanup()
 {
 	cd /
 	# Unmount nested mounts if things fail
-	$UMOUNT_PROG $OVL_BASE_SCRATCH_MNT/nested  2>/dev/null
+	_unmount $OVL_BASE_SCRATCH_MNT/nested  2>/dev/null
 	rm -rf $tmp
 }
 
@@ -44,7 +44,7 @@ nesteddir=$OVL_BASE_SCRATCH_MNT/nested
 
 umount_overlay()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 test_escape()
@@ -88,12 +88,12 @@ test_escape()
 	echo "nested xattr mount with trusted.overlay"
 	_overlay_mount_dirs $SCRATCH_MNT/layer2:$SCRATCH_MNT/layer1 - - overlayfs $nesteddir
 	stat $nesteddir/dir/file  2>&1 | _filter_scratch
-	$UMOUNT_PROG $nesteddir
+	_unmount $nesteddir
 
 	echo "nested xattr mount with user.overlay"
 	_overlay_mount_dirs $SCRATCH_MNT/layer2:$SCRATCH_MNT/layer1 - - -o userxattr overlayfs $nesteddir
 	stat $nesteddir/dir/file  2>&1 | _filter_scratch
-	$UMOUNT_PROG $nesteddir
+	_unmount $nesteddir
 
 	# Also ensure propagate the escaped xattr when we copy-up layer2/dir
 	echo "copy-up of escaped xattrs"
@@ -164,7 +164,7 @@ test_escaped_xwhiteout()
 
 	do_test_xwhiteout $prefix $nesteddir
 
-	$UMOUNT_PROG $nesteddir
+	_unmount $nesteddir
 }
 
 test_escaped_xwhiteout trusted
diff --git a/tests/overlay/085 b/tests/overlay/085
index 046d01d16..95665fba8 100755
--- a/tests/overlay/085
+++ b/tests/overlay/085
@@ -157,7 +157,7 @@ mount_ro_overlay()
 
 umount_overlay()
 {
-	$UMOUNT_PROG $SCRATCH_MNT
+	_unmount $SCRATCH_MNT
 }
 
 test_no_access()
diff --git a/tests/overlay/086 b/tests/overlay/086
index 9c8a00588..d0b2a76ca 100755
--- a/tests/overlay/086
+++ b/tests/overlay/086
@@ -38,21 +38,21 @@ $MOUNT_PROG -t overlay none $SCRATCH_MNT \
 	2>> $seqres.full && \
 	echo "ERROR: invalid combination of lowerdir and lowerdir+ mount options"
 
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 $MOUNT_PROG -t overlay none $SCRATCH_MNT \
 	-o"lowerdir=$lowerdir,datadir+=$lowerdir_colons" \
 	-o redirect_dir=follow,metacopy=on 2>> $seqres.full && \
 	echo "ERROR: invalid combination of lowerdir and datadir+ mount options"
 
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 $MOUNT_PROG -t overlay none $SCRATCH_MNT \
 	-o"datadir+=$lowerdir,lowerdir+=$lowerdir_colons" \
 	-o redirect_dir=follow,metacopy=on 2>> $seqres.full && \
 	echo "ERROR: invalid order of lowerdir+ and datadir+ mount options"
 
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 # mount is expected to fail with escaped colons.
 $MOUNT_PROG -t overlay none $SCRATCH_MNT \
@@ -60,7 +60,7 @@ $MOUNT_PROG -t overlay none $SCRATCH_MNT \
 	2>> $seqres.full && \
 	echo "ERROR: incorrect parsing of escaped colons in lowerdir+ mount option"
 
-$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
+_unmount $SCRATCH_MNT 2>/dev/null
 
 # mount is expected to succeed without escaped colons.
 $MOUNT_PROG -t overlay ovl_esc_test $SCRATCH_MNT \

Re: [PATCH] fstests: finish UMOUNT_PROG to _unmount conversion

[Filipe Manana]

On Tue, Feb 25, 2025 at 10:19 PM Dave Chinner <david@fromorbit.com> wrote:
>
> On Thu, Feb 20, 2025 at 08:18:19PM -0800, Darrick J. Wong wrote:
> > On Thu, Feb 20, 2025 at 06:22:57PM +0000, Filipe Manana wrote:
> > > On Thu, Feb 20, 2025 at 5:03 PM Darrick J. Wong <djwong@kernel.org> wrote:
> > > >
> > > > On Thu, Feb 20, 2025 at 01:27:32PM +0800, Anand Jain wrote:
> > > > > On 20/2/25 02:19, fdmanana@kernel.org wrote:
> > > > > > From: Filipe Manana <fdmanana@suse.com>
> > > > > >
> > > > > > If the test fails or is interrupted after mounting $scratch_dev3 inside
> > > > > > the test filesystem and before unmounting at test_add_device(), we leave
> > > > > > without being unable to unmount the test filesystem since it has a mount
> > > > > > inside it. This results in the need to manually unmount $scratch_dev3,
> > > > > > otherwise a subsequent run of fstests fails since the unmount of the
> > > > > > test device fails with -EBUSY.
> > > > > >
> > > > > > Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
> > > > > > function.
> > > > > >
> > > > > > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > > > > > ---
> > > > > >   tests/btrfs/254 | 1 +
> > > > > >   1 file changed, 1 insertion(+)
> > > > > >
> > > > > > diff --git a/tests/btrfs/254 b/tests/btrfs/254
> > > > > > index d9c9eea9..6523389b 100755
> > > > > > --- a/tests/btrfs/254
> > > > > > +++ b/tests/btrfs/254
> > > > > > @@ -21,6 +21,7 @@ _cleanup()
> > > > > >   {
> > > > > >     cd /
> > > > > >     rm -f $tmp.*
> > > > > > +   $UMOUNT_PROG $seq_mnt > /dev/null 2>&1
> > > >
> > > > This should use the _unmount helper that's in for-next.
> > >
> > > Sure, it does the same, except that it redirects stdout and stderr to
> > > $seqres.full.
> > >
> > > Some tests are still calling  $UMOUNT_PROG directly. And that's often
> > > what we want, so that if umount fails we get a mismatch with the
> > > golden output instead of ignoring the failure.
> > > But in this case it's fine.
> >
> > <groan> You're right, I'd repressed that Chinner decided to introduce
> > _unmount so that he could improve logging of unmount failures but then
> > he only bothered converting tests/{generic,xfs} because he didn't give
> > a damn about anyone else.
>
> That's uncalled for, Darrick.
>
> You know very well that I posted an incomplete RFC that I was asking
> for reveiw on, not for it to be merged. The maintainer decided to
> merge it and did not wait for me to finish the conversions.
>
> > Now fstests is stuck with a half finished conversion and no clarity
> > about whether the rest of the $UMOUNT_PROG invocations should be
> > converted to _umount or if those are somehow intentional.
> >
> > Hey Zorro, do you have any opinion on this?  Should someone just finish
> > the $UMOUNT_PROG -> _unmount conversion next week?
>
> Why put it off? With the logging fixes to _unmount() that are
> already merged, it's a purely mechanical change using sed. Patch
> below.
>
> -Dave.
>
> --
> Dave Chinner
> david@fromorbit.com
>
> fstests: finish UMOUNT_PROG to _unmount conversion
>
> From: Dave Chinner <dchinner@redhat.com>
>
> Because only tests/generic and tests/xfs have been converted so far
> and the conversion needs finishing. _unmount is a drop-in
> replacement for $UMOUNT_PROG, so we can simply do a mechanical
> conversion like so:
>
> $ sed -i s/\$UMOUNT_PROG/_unmount/g tests/*/*
>
> Signed-off-by: Dave Chinner <dchinner@redhat.com>
> ---
>  tests/btrfs/020   |  2 +-
>  tests/btrfs/029   |  2 +-
>  tests/btrfs/031   |  2 +-
>  tests/btrfs/060   |  2 +-
>  tests/btrfs/065   |  2 +-
>  tests/btrfs/066   |  2 +-
>  tests/btrfs/067   |  2 +-
>  tests/btrfs/068   |  2 +-
>  tests/btrfs/075   |  2 +-
>  tests/btrfs/089   |  2 +-
>  tests/btrfs/124   |  2 +-
>  tests/btrfs/125   |  2 +-
>  tests/btrfs/185   |  4 ++--
>  tests/btrfs/197   |  4 ++--
>  tests/btrfs/219   | 12 ++++++------
>  tests/btrfs/254   |  2 +-
>  tests/btrfs/311   |  2 +-
>  tests/btrfs/313   |  2 +-
>  tests/btrfs/314   |  2 +-
>  tests/btrfs/315   |  2 +-
>  tests/btrfs/318   |  6 +++---
>  tests/btrfs/326   | 10 +++++-----
>  tests/btrfs/330   |  4 ++--
>  tests/ext4/032    |  4 ++--
>  tests/ext4/052    |  4 ++--
>  tests/ext4/053    | 32 ++++++++++++++++----------------
>  tests/ext4/056    |  2 +-
>  tests/overlay/003 |  2 +-
>  tests/overlay/004 |  2 +-
>  tests/overlay/005 |  6 +++---
>  tests/overlay/014 |  4 ++--
>  tests/overlay/022 |  2 +-
>  tests/overlay/025 |  4 ++--
>  tests/overlay/029 |  6 +++---
>  tests/overlay/031 |  8 ++++----
>  tests/overlay/035 |  2 +-
>  tests/overlay/036 |  8 ++++----
>  tests/overlay/037 |  6 +++---
>  tests/overlay/040 |  2 +-
>  tests/overlay/041 |  2 +-
>  tests/overlay/042 |  2 +-
>  tests/overlay/043 |  2 +-
>  tests/overlay/044 |  2 +-
>  tests/overlay/048 |  4 ++--
>  tests/overlay/049 |  2 +-
>  tests/overlay/050 |  2 +-
>  tests/overlay/051 |  4 ++--
>  tests/overlay/052 |  2 +-
>  tests/overlay/053 |  4 ++--
>  tests/overlay/054 |  2 +-
>  tests/overlay/055 |  4 ++--
>  tests/overlay/056 |  2 +-
>  tests/overlay/057 |  4 ++--
>  tests/overlay/059 |  2 +-
>  tests/overlay/060 |  2 +-
>  tests/overlay/062 |  2 +-
>  tests/overlay/063 |  2 +-
>  tests/overlay/065 | 22 +++++++++++-----------
>  tests/overlay/067 |  2 +-
>  tests/overlay/068 |  4 ++--
>  tests/overlay/069 |  6 +++---
>  tests/overlay/070 |  6 +++---
>  tests/overlay/071 |  6 +++---
>  tests/overlay/076 |  2 +-
>  tests/overlay/077 |  2 +-
>  tests/overlay/078 |  2 +-
>  tests/overlay/079 |  2 +-
>  tests/overlay/080 |  2 +-
>  tests/overlay/081 | 14 +++++++-------
>  tests/overlay/083 |  2 +-
>  tests/overlay/084 | 10 +++++-----
>  tests/overlay/085 |  2 +-
>  tests/overlay/086 |  8 ++++----
>  73 files changed, 153 insertions(+), 153 deletions(-)
>
> diff --git a/tests/btrfs/020 b/tests/btrfs/020
> index 7e5c6fd7b..badb76f75 100755
> --- a/tests/btrfs/020
> +++ b/tests/btrfs/020
> @@ -17,7 +17,7 @@ _cleanup()
>  {
>         cd /
>         rm -f $tmp.*
> -       $UMOUNT_PROG $loop_mnt
> +       _unmount $loop_mnt
>         _destroy_loop_device $loop_dev1
>         losetup -d $loop_dev2 >/dev/null 2>&1
>         _destroy_loop_device $loop_dev3
> diff --git a/tests/btrfs/029 b/tests/btrfs/029
> index c37ad63fb..1f8201af3 100755
> --- a/tests/btrfs/029
> +++ b/tests/btrfs/029
> @@ -74,7 +74,7 @@ cp --reflink=always $orig_file $copy_file >> $seqres.full 2>&1 || echo "cp refli
>  md5sum $orig_file | _filter_testdir_and_scratch
>  md5sum $copy_file | _filter_testdir_and_scratch
>
> -$UMOUNT_PROG $reflink_test_dir
> +_unmount $reflink_test_dir

This isn't equivalent to directly calling UMOUNT_PROG since the
_unmount helper always redirects stdout and stderr to $seqres.full.
Meaning failures may often be ignored or not immediately obvious as before.

This applies to many other places, just picking the first to comment.

>
>  # success, all done
>  status=0
> diff --git a/tests/btrfs/031 b/tests/btrfs/031
> index 8ac73d3a8..12ad84c64 100755
> --- a/tests/btrfs/031
> +++ b/tests/btrfs/031
> @@ -99,7 +99,7 @@ mv $testdir2/file* $subvol2/
>  echo "Verify the file contents:"
>  _checksum_files
>
> -$UMOUNT_PROG $cross_mount_test_dir
> +_unmount $cross_mount_test_dir
>
>  # success, all done
>  status=0
> diff --git a/tests/btrfs/060 b/tests/btrfs/060
> index 21f15ec89..fff9bed81 100755
> --- a/tests/btrfs/060
> +++ b/tests/btrfs/060
> @@ -76,7 +76,7 @@ run_test()
>         fi
>
>         # in case the subvolume is still mounted
> -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> +       _unmount $subvol_mnt >/dev/null 2>&1

And here there's no point of having the redirections, since the helper
always redirects stdout/stderr to $seqres.full.
So it could be removed to make things more readable.

This also applies to many other places, just picking the first to comment.

Thanks.

>         _scratch_unmount
>         # we called _require_scratch_nocheck instead of _require_scratch
>         # do check after test for each profile config
> diff --git a/tests/btrfs/065 b/tests/btrfs/065
> index f0c9ffb04..77ec89038 100755
> --- a/tests/btrfs/065
> +++ b/tests/btrfs/065
> @@ -84,7 +84,7 @@ run_test()
>         fi
>
>         # in case the subvolume is still mounted
> -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> +       _unmount $subvol_mnt >/dev/null 2>&1
>         _scratch_unmount
>         # we called _require_scratch_nocheck instead of _require_scratch
>         # do check after test for each profile config
> diff --git a/tests/btrfs/066 b/tests/btrfs/066
> index e3a083b94..07ed799a5 100755
> --- a/tests/btrfs/066
> +++ b/tests/btrfs/066
> @@ -76,7 +76,7 @@ run_test()
>         fi
>
>         # in case the subvolume is still mounted
> -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> +       _unmount $subvol_mnt >/dev/null 2>&1
>         _scratch_unmount
>         # we called _require_scratch_nocheck instead of _require_scratch
>         # do check after test for each profile config
> diff --git a/tests/btrfs/067 b/tests/btrfs/067
> index 768993116..17c772d04 100755
> --- a/tests/btrfs/067
> +++ b/tests/btrfs/067
> @@ -77,7 +77,7 @@ run_test()
>         fi
>
>         # in case the subvolume is still mounted
> -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> +       _unmount $subvol_mnt >/dev/null 2>&1
>         _scratch_unmount
>         # we called _require_scratch_nocheck instead of _require_scratch
>         # do check after test for each profile config
> diff --git a/tests/btrfs/068 b/tests/btrfs/068
> index 3d221259f..37b6b6ba8 100755
> --- a/tests/btrfs/068
> +++ b/tests/btrfs/068
> @@ -77,7 +77,7 @@ run_test()
>         fi
>
>         # in case the subvolume is still mounted
> -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> +       _unmount $subvol_mnt >/dev/null 2>&1
>         _scratch_unmount
>         # we called _require_scratch_nocheck instead of _require_scratch
>         # do check after test for each profile config
> diff --git a/tests/btrfs/075 b/tests/btrfs/075
> index 917993ca2..328dc5f68 100755
> --- a/tests/btrfs/075
> +++ b/tests/btrfs/075
> @@ -15,7 +15,7 @@ _cleanup()
>  {
>         cd /
>         rm -f $tmp.*
> -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> +       _unmount $subvol_mnt >/dev/null 2>&1
>  }
>
>  . ./common/filter
> diff --git a/tests/btrfs/089 b/tests/btrfs/089
> index 8f8e37b6f..8c06535d9 100755
> --- a/tests/btrfs/089
> +++ b/tests/btrfs/089
> @@ -35,7 +35,7 @@ mount --bind "$SCRATCH_MNT/testvol/testdir" "$SCRATCH_MNT/testvol/mnt"
>  $BTRFS_UTIL_PROG subvolume delete "$SCRATCH_MNT/testvol" >>$seqres.full 2>&1
>
>  # Unmount the bind mount, which should still be alive.
> -$UMOUNT_PROG "$SCRATCH_MNT/testvol/mnt"
> +_unmount "$SCRATCH_MNT/testvol/mnt"
>
>  echo "Silence is golden"
>  status=0
> diff --git a/tests/btrfs/124 b/tests/btrfs/124
> index af079c286..7c33a8fab 100755
> --- a/tests/btrfs/124
> +++ b/tests/btrfs/124
> @@ -132,7 +132,7 @@ if [ "$checkpoint1" != "$checkpoint3" ]; then
>         echo "Inital sum does not match with data on dev2 written by balance"
>  fi
>
> -$UMOUNT_PROG $dev2
> +_unmount $dev2
>  _scratch_dev_pool_put
>  _btrfs_rescan_devices
>  _test_mount
> diff --git a/tests/btrfs/125 b/tests/btrfs/125
> index c8c0dd422..790f35d55 100755
> --- a/tests/btrfs/125
> +++ b/tests/btrfs/125
> @@ -144,7 +144,7 @@ if [ "$checkpoint1" != "$checkpoint3" ]; then
>         echo "Inital sum does not match with data on dev2 written by balance"
>  fi
>
> -$UMOUNT_PROG $dev2
> +_unmount $dev2
>  _scratch_dev_pool_put
>  _btrfs_rescan_devices
>  _test_mount
> diff --git a/tests/btrfs/185 b/tests/btrfs/185
> index 8d0643450..f52608852 100755
> --- a/tests/btrfs/185
> +++ b/tests/btrfs/185
> @@ -15,7 +15,7 @@ mnt=$TEST_DIR/$seq.mnt
>  # Override the default cleanup function.
>  _cleanup()
>  {
> -       $UMOUNT_PROG $mnt > /dev/null 2>&1
> +       _unmount $mnt > /dev/null 2>&1
>         rm -rf $mnt > /dev/null 2>&1
>         cd /
>         rm -f $tmp.*
> @@ -62,7 +62,7 @@ $BTRFS_UTIL_PROG device scan $device_1 >> $seqres.full 2>&1
>         _fail "if it fails here, then it means subvolume mount at boot may fail "\
>               "in some configs."
>
> -$UMOUNT_PROG $mnt > /dev/null 2>&1
> +_unmount $mnt > /dev/null 2>&1
>  _scratch_dev_pool_put
>
>  # success, all done
> diff --git a/tests/btrfs/197 b/tests/btrfs/197
> index 9f1d879a4..111589913 100755
> --- a/tests/btrfs/197
> +++ b/tests/btrfs/197
> @@ -15,7 +15,7 @@ _begin_fstest auto quick volume
>  # Override the default cleanup function.
>  _cleanup()
>  {
> -       $UMOUNT_PROG $TEST_DIR/$seq.mnt >/dev/null 2>&1
> +       _unmount $TEST_DIR/$seq.mnt >/dev/null 2>&1
>         rm -rf $TEST_DIR/$seq.mnt
>         cd /
>         rm -f $tmp.*
> @@ -67,7 +67,7 @@ workout()
>         grep -q "${SCRATCH_DEV_NAME[1]}" $tmp.output && _fail "found stale device"
>
>         $BTRFS_UTIL_PROG device remove "${SCRATCH_DEV_NAME[1]}" "$TEST_DIR/$seq.mnt"
> -       $UMOUNT_PROG $TEST_DIR/$seq.mnt
> +       _unmount $TEST_DIR/$seq.mnt
>         _scratch_unmount
>         _spare_dev_put
>         _scratch_dev_pool_put
> diff --git a/tests/btrfs/219 b/tests/btrfs/219
> index 052f61a39..58384957e 100755
> --- a/tests/btrfs/219
> +++ b/tests/btrfs/219
> @@ -21,8 +21,8 @@ _cleanup()
>         rm -f $tmp.*
>
>         # The variables are set before the test case can fail.
> -       $UMOUNT_PROG ${loop_mnt1} &> /dev/null
> -       $UMOUNT_PROG ${loop_mnt2} &> /dev/null
> +       _unmount ${loop_mnt1} &> /dev/null
> +       _unmount ${loop_mnt2} &> /dev/null
>         rm -rf $loop_mnt1
>         rm -rf $loop_mnt2
>
> @@ -66,7 +66,7 @@ loop_dev2=`_create_loop_device $fs_img2`
>  # Normal single device case, should pass just fine
>  _mount $loop_dev1 $loop_mnt1 > /dev/null  2>&1 || \
>         _fail "Couldn't do initial mount"
> -$UMOUNT_PROG $loop_mnt1
> +_unmount $loop_mnt1
>
>  _btrfs_forget_or_module_reload
>
> @@ -75,15 +75,15 @@ _btrfs_forget_or_module_reload
>  # measure.
>  _mount $loop_dev1 $loop_mnt1 > /dev/null 2>&1 || \
>         _fail "Failed to mount the second time"
> -$UMOUNT_PROG $loop_mnt1
> +_unmount $loop_mnt1
>
>  _mount $loop_dev2 $loop_mnt2 > /dev/null 2>&1 || \
>         _fail "We couldn't mount the old generation"
> -$UMOUNT_PROG $loop_mnt2
> +_unmount $loop_mnt2
>
>  _mount $loop_dev1 $loop_mnt1 > /dev/null 2>&1 || \
>         _fail "Failed to mount the second time"
> -$UMOUNT_PROG $loop_mnt1
> +_unmount $loop_mnt1
>
>  # Now try mount them at the same time, if kernel does not support
>  # temp-fsid feature then mount will fail.
> diff --git a/tests/btrfs/254 b/tests/btrfs/254
> index d9c9eea9c..548224894 100755
> --- a/tests/btrfs/254
> +++ b/tests/btrfs/254
> @@ -96,7 +96,7 @@ test_add_device()
>         $BTRFS_UTIL_PROG filesystem show -m $SCRATCH_MNT | \
>                                         _filter_btrfs_filesystem_show
>
> -       $UMOUNT_PROG $seq_mnt
> +       _unmount $seq_mnt
>         _scratch_unmount
>         cleanup_dmdev
>  }
> diff --git a/tests/btrfs/311 b/tests/btrfs/311
> index 51147c59f..3161e62db 100755
> --- a/tests/btrfs/311
> +++ b/tests/btrfs/311
> @@ -14,7 +14,7 @@ _begin_fstest auto quick subvol tempfsid
>  _cleanup()
>  {
>         cd /
> -       $UMOUNT_PROG $mnt1 > /dev/null 2>&1
> +       _unmount $mnt1 > /dev/null 2>&1
>         rm -r -f $tmp.*
>         rm -r -f $mnt1
>  }
> diff --git a/tests/btrfs/313 b/tests/btrfs/313
> index 5a9e98dea..bf62af7b2 100755
> --- a/tests/btrfs/313
> +++ b/tests/btrfs/313
> @@ -12,7 +12,7 @@ _begin_fstest auto quick clone tempfsid
>  _cleanup()
>  {
>         cd /
> -       $UMOUNT_PROG $mnt1 > /dev/null 2>&1
> +       _unmount $mnt1 > /dev/null 2>&1
>         rm -r -f $tmp.*
>         rm -r -f $mnt1
>  }
> diff --git a/tests/btrfs/314 b/tests/btrfs/314
> index 76dccc41f..f3e5c504b 100755
> --- a/tests/btrfs/314
> +++ b/tests/btrfs/314
> @@ -13,7 +13,7 @@ _begin_fstest auto quick snapshot send tempfsid
>  _cleanup()
>  {
>         cd /
> -       $UMOUNT_PROG $tempfsid_mnt 2>/dev/null
> +       _unmount $tempfsid_mnt 2>/dev/null
>         rm -r -f $tmp.*
>         rm -r -f $sendfile
>         rm -r -f $tempfsid_mnt
> diff --git a/tests/btrfs/315 b/tests/btrfs/315
> index e6589abec..0ea2e8b35 100755
> --- a/tests/btrfs/315
> +++ b/tests/btrfs/315
> @@ -13,7 +13,7 @@ _begin_fstest auto quick volume seed balance tempfsid
>  _cleanup()
>  {
>         cd /
> -       $UMOUNT_PROG $tempfsid_mnt 2>/dev/null
> +       _unmount $tempfsid_mnt 2>/dev/null
>         rm -r -f $tmp.*
>         rm -r -f $tempfsid_mnt
>  }
> diff --git a/tests/btrfs/318 b/tests/btrfs/318
> index df5a4a072..ad3040d64 100755
> --- a/tests/btrfs/318
> +++ b/tests/btrfs/318
> @@ -22,8 +22,8 @@ _require_loop
>
>  _cleanup() {
>         cd /
> -       $UMOUNT_PROG $MNT
> -       $UMOUNT_PROG $BIND
> +       _unmount $MNT
> +       _unmount $BIND
>         losetup -d $DEV0 $DEV1 $DEV2
>         rm -f $IMG0 $IMG1 $IMG2
>         rm -rf $MNT $BIND
> @@ -58,7 +58,7 @@ $MKFS_BTRFS_PROG -f -msingle -dsingle $D0P1 $DEV2 >>$seqres.full 2>&1 || _fail "
>  rm -rf $MNT
>  mkdir -p $MNT
>  _mount $D0P1 $MNT
> -$UMOUNT_PROG $MNT
> +_unmount $MNT
>
>  # Swap the partition dev_ts. This leaves the dev_t in the cache out of date.
>  $PARTED_PROG $DEV0 'rm 1' --script
> diff --git a/tests/btrfs/326 b/tests/btrfs/326
> index 1fc4db06b..51f769f9a 100755
> --- a/tests/btrfs/326
> +++ b/tests/btrfs/326
> @@ -25,8 +25,8 @@ _cleanup()
>         [ -n "$mount_pid" ] && kill $mount_pid &> /dev/null
>         [ -n "$remount_pid" ] && kill $remount_pid &> /dev/null
>         wait
> -       $UMOUNT_PROG "$subv1_mount" &> /dev/null
> -       $UMOUNT_PROG "$subv2_mount" &> /dev/null
> +       _unmount "$subv1_mount" &> /dev/null
> +       _unmount "$subv2_mount" &> /dev/null
>         rm -rf -- "$subv1_mount" "$subv2_mount"
>  }
>
> @@ -80,7 +80,7 @@ mount_workload()
>         trap "wait; exit" SIGTERM
>         while true; do
>                 _mount "$SCRATCH_DEV" "$subv2_mount"
> -               $UMOUNT_PROG "$subv2_mount"
> +               _unmount "$subv2_mount"
>         done
>  }
>
> @@ -94,12 +94,12 @@ wait
>  unset remount_pid mount_pid
>
>  # Subv1 is always mounted, thus the umount should never fail.
> -$UMOUNT_PROG "$subv1_mount"
> +_unmount "$subv1_mount"
>
>  # Subv2 may have already been unmounted, so here we ignore all output.
>  # This may hide some errors like -EBUSY, but the next rm line would
>  # detect any still mounted subvolume so we're still safe.
> -$UMOUNT_PROG "$subv2_mount" &> /dev/null
> +_unmount "$subv2_mount" &> /dev/null
>
>  # If above unmount, especially subv2 is not properly unmounted,
>  # the rm should fail with some error message
> diff --git a/tests/btrfs/330 b/tests/btrfs/330
> index 92cc498f2..07de58698 100755
> --- a/tests/btrfs/330
> +++ b/tests/btrfs/330
> @@ -48,7 +48,7 @@ echo "making sure bar allows writes"
>  touch $TEST_DIR/$seq/bar/qux
>  ls $TEST_DIR/$seq/bar
>
> -$UMOUNT_PROG $TEST_DIR/$seq/foo
> -$UMOUNT_PROG $TEST_DIR/$seq/bar
> +_unmount $TEST_DIR/$seq/foo
> +_unmount $TEST_DIR/$seq/bar
>
>  status=0 ; exit
> diff --git a/tests/ext4/032 b/tests/ext4/032
> index 690fcf066..e6f8c22ba 100755
> --- a/tests/ext4/032
> +++ b/tests/ext4/032
> @@ -63,7 +63,7 @@ ext4_online_resize()
>         fi
>         cat $tmp.resize2fs >> $seqres.full
>         echo "+++ umount fs" | tee -a $seqres.full
> -       $UMOUNT_PROG ${IMG_MNT}
> +       _unmount ${IMG_MNT}
>
>         echo "+++ check fs" | tee -a $seqres.full
>         _check_generic_filesystem $LOOP_DEVICE >> $seqres.full 2>&1 || \
> @@ -77,7 +77,7 @@ _cleanup()
>         cd /
>         [ -n "$LOOP_DEVICE" ] && _destroy_loop_device $LOOP_DEVICE > /dev/null 2>&1
>         rm -f $tmp.*
> -       $UMOUNT_PROG ${IMG_MNT} > /dev/null 2>&1
> +       _unmount ${IMG_MNT} > /dev/null 2>&1
>         rm -f ${IMG_FILE} > /dev/null 2>&1
>  }
>
> diff --git a/tests/ext4/052 b/tests/ext4/052
> index 0df8a6513..4c02f75cb 100755
> --- a/tests/ext4/052
> +++ b/tests/ext4/052
> @@ -18,7 +18,7 @@ _cleanup()
>         cd /
>         rm -r -f $tmp.*
>         if [ ! -z "$loop_mnt" ]; then
> -               $UMOUNT_PROG $loop_mnt
> +               _unmount $loop_mnt
>                 rm -rf $loop_mnt
>         fi
>         [ ! -z "$fs_img" ] && rm -rf $fs_img
> @@ -64,7 +64,7 @@ then
>      status=1
>  fi
>
> -$UMOUNT_PROG $loop_mnt || _fail "umount failed"
> +_unmount $loop_mnt || _fail "umount failed"
>  loop_mnt=
>
>  $E2FSCK_PROG -fn $fs_img >> $seqres.full 2>&1 || _fail "file system corrupted"
> diff --git a/tests/ext4/053 b/tests/ext4/053
> index 5922ed571..3e2cda099 100755
> --- a/tests/ext4/053
> +++ b/tests/ext4/053
> @@ -20,7 +20,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
>  _cleanup()
>  {
>         cd /
> -       $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> +       _unmount $SCRATCH_MNT > /dev/null 2>&1
>         if [ -n "$LOOP_LOGDEV" ];then
>                 _destroy_loop_device $LOOP_LOGDEV 2>/dev/null
>         fi
> @@ -236,7 +236,7 @@ not_mnt() {
>         if simple_mount -o $1 $SCRATCH_DEV $SCRATCH_MNT; then
>                 print_log "(mount unexpectedly succeeded)"
>                 fail
> -               $UMOUNT_PROG $SCRATCH_MNT
> +               _unmount $SCRATCH_MNT
>                 return
>         fi
>         ok
> @@ -247,7 +247,7 @@ not_mnt() {
>                 return
>         fi
>         not_remount $1
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  mnt_only() {
> @@ -269,7 +269,7 @@ mnt() {
>         fi
>
>         mnt_only $*
> -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> +       _unmount $SCRATCH_MNT 2> /dev/null
>
>         [ "$t2fs" -eq 0 ] && return
>
> @@ -288,7 +288,7 @@ mnt() {
>                                     -e 's/data=writeback/journal_data_writeback/')
>         $TUNE2FS_PROG -o $op_set $SCRATCH_DEV > /dev/null 2>&1
>         mnt_only "defaults" $check
> -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> +       _unmount $SCRATCH_MNT 2> /dev/null
>         if [ "$op_set" = ^* ]; then
>                 op_set=${op_set#^}
>         else
> @@ -308,12 +308,12 @@ remount() {
>         do_mnt remount,$2 $3
>         if [ $? -ne 0 ]; then
>                 fail
> -               $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> +               _unmount $SCRATCH_MNT 2> /dev/null
>                 return
>         else
>                 ok
>         fi
> -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> +       _unmount $SCRATCH_MNT 2> /dev/null
>
>         # Now just specify mnt
>         print_log "mounting $fstype \"$1\" "
> @@ -327,7 +327,7 @@ remount() {
>                 ok
>         fi
>
> -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> +       _unmount $SCRATCH_MNT 2> /dev/null
>  }
>
>  # Test that the filesystem cannot be remounted with option(s) $1 (meaning that
> @@ -363,7 +363,7 @@ mnt_then_not_remount() {
>                 return
>         fi
>         not_remount $2
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>
> @@ -399,8 +399,8 @@ LOGDEV_DEVNUM=`echo "${majmin%:*}*2^8 + ${majmin#*:}" | bc`
>  fstype=
>  for fstype in ext2 ext3 ext4; do
>
> -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> -       $UMOUNT_PROG $SCRATCH_DEV 2> /dev/null
> +       _unmount $SCRATCH_MNT 2> /dev/null
> +       _unmount $SCRATCH_DEV 2> /dev/null
>
>         do_mkfs $SCRATCH_DEV ${SIZE}k
>
> @@ -417,7 +417,7 @@ for fstype in ext2 ext3 ext4; do
>                 continue
>         fi
>
> -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> +       _unmount $SCRATCH_MNT 2> /dev/null
>
>         not_mnt failme
>         mnt
> @@ -551,7 +551,7 @@ for fstype in ext2 ext3 ext4; do
>         # dax mount options
>         simple_mount -o dax=always $SCRATCH_DEV $SCRATCH_MNT > /dev/null 2>&1
>         if [ $? -eq 0 ]; then
> -               $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> +               _unmount $SCRATCH_MNT 2> /dev/null
>                 mnt dax
>                 mnt dax=always
>                 mnt dax=never
> @@ -632,7 +632,7 @@ for fstype in ext2 ext3 ext4; do
>         not_remount jqfmt=vfsv1
>         not_remount noquota
>         mnt_only remount,usrquota,grpquota ^usrquota,^grpquota
> -       $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> +       _unmount $SCRATCH_MNT > /dev/null 2>&1
>
>         # test clearing/changing quota when enabled
>         do_mkfs -E quotatype=^prjquota $SCRATCH_DEV ${SIZE}k
> @@ -653,7 +653,7 @@ for fstype in ext2 ext3 ext4; do
>         mnt_only remount,usrquota,grpquota usrquota,grpquota
>         quotaoff -f $SCRATCH_MNT >> $seqres.full 2>&1
>         mnt_only remount,noquota ^usrquota,^grpquota,quota
> -       $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> +       _unmount $SCRATCH_MNT > /dev/null 2>&1
>
>         # Quota feature
>         echo "== Testing quota feature " >> $seqres.full
> @@ -695,7 +695,7 @@ for fstype in ext2 ext3 ext4; do
>
>  done #for fstype in ext2 ext3 ext4; do
>
> -$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> +_unmount $SCRATCH_MNT > /dev/null 2>&1
>  echo "$ERR errors encountered" >> $seqres.full
>
>  status=$ERR
> diff --git a/tests/ext4/056 b/tests/ext4/056
> index fb5bbe93e..d22aebfa6 100755
> --- a/tests/ext4/056
> +++ b/tests/ext4/056
> @@ -72,7 +72,7 @@ do_resize()
>         # delay
>         sleep 0.2
>         _scratch_unmount >> $seqres.full 2>&1 \
> -               || _fail "$UMOUNT_PROG failed. Exiting"
> +               || _fail "_unmount failed. Exiting"
>  }
>
>  run_test()
> diff --git a/tests/overlay/003 b/tests/overlay/003
> index 41ad99e79..0b5660b8e 100755
> --- a/tests/overlay/003
> +++ b/tests/overlay/003
> @@ -56,7 +56,7 @@ rm -rf ${SCRATCH_MNT}/*
>  ls ${SCRATCH_MNT}/
>
>  # unmount overlayfs but not base fs
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  echo "Silence is golden"
>  # success, all done
> diff --git a/tests/overlay/004 b/tests/overlay/004
> index bea4bb543..e97e9ddd9 100755
> --- a/tests/overlay/004
> +++ b/tests/overlay/004
> @@ -53,7 +53,7 @@ _user_do "chmod u-X ${SCRATCH_MNT}/attr_file2 > /dev/null 2>&1"
>  stat -c %a ${SCRATCH_MNT}/attr_file2
>
>  # unmount overlayfs but not base fs
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # check mode bits of the file that has been copied up, and
>  # the file that should not have been copied up.
> diff --git a/tests/overlay/005 b/tests/overlay/005
> index 4c11d5e1b..1495999b7 100755
> --- a/tests/overlay/005
> +++ b/tests/overlay/005
> @@ -75,14 +75,14 @@ $XFS_IO_PROG -f -c "o" ${SCRATCH_MNT}/test_file \
>         >>$seqres.full 2>&1
>
>  # unmount overlayfs
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # check overlayfs
>  _overlay_check_scratch_dirs $lowerd $upperd $workd
>
>  # unmount undelying xfs, this tiggers panic if memleak happens
> -$UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/uppermnt
> -$UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/lowermnt
> +_unmount ${OVL_BASE_SCRATCH_MNT}/uppermnt
> +_unmount ${OVL_BASE_SCRATCH_MNT}/lowermnt
>
>  # success, all done
>  echo "Silence is golden"
> diff --git a/tests/overlay/014 b/tests/overlay/014
> index f07fc6855..aeb1467a7 100755
> --- a/tests/overlay/014
> +++ b/tests/overlay/014
> @@ -46,7 +46,7 @@ _overlay_scratch_mount_dirs $lowerdir1 $lowerdir2 $workdir2
>  rm -rf $SCRATCH_MNT/testdir
>  mkdir -p $SCRATCH_MNT/testdir/visibledir
>  # unmount overlayfs but not base fs
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # check overlayfs
>  _overlay_check_scratch_dirs $lowerdir1 $lowerdir2 $workdir2
> @@ -59,7 +59,7 @@ touch $SCRATCH_MNT/testdir/visiblefile
>
>  # umount and mount overlay again, buggy kernel treats the copied-up dir as
>  # opaque, visibledir is not seen in merged dir.
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>  _overlay_scratch_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
>  ls $SCRATCH_MNT/testdir
>
> diff --git a/tests/overlay/022 b/tests/overlay/022
> index d33bd2978..8b26a2cd0 100755
> --- a/tests/overlay/022
> +++ b/tests/overlay/022
> @@ -17,7 +17,7 @@ _begin_fstest auto quick mount nested
>  _cleanup()
>  {
>         cd /
> -       $UMOUNT_PROG $tmp/mnt > /dev/null 2>&1
> +       _unmount $tmp/mnt > /dev/null 2>&1
>         rm -rf $tmp
>         rm -f $tmp.*
>  }
> diff --git a/tests/overlay/025 b/tests/overlay/025
> index dc819a393..3b6cf987b 100755
> --- a/tests/overlay/025
> +++ b/tests/overlay/025
> @@ -19,8 +19,8 @@ _begin_fstest auto quick attr
>  _cleanup()
>  {
>         cd /
> -       $UMOUNT_PROG $tmpfsdir/mnt
> -       $UMOUNT_PROG $tmpfsdir
> +       _unmount $tmpfsdir/mnt
> +       _unmount $tmpfsdir
>         rm -rf $tmpfsdir
>         rm -f $tmp.*
>  }
> diff --git a/tests/overlay/029 b/tests/overlay/029
> index 4bade9a0e..b0ed7285f 100755
> --- a/tests/overlay/029
> +++ b/tests/overlay/029
> @@ -22,7 +22,7 @@ _begin_fstest auto quick nested
>  _cleanup()
>  {
>         cd /
> -       $UMOUNT_PROG $tmp/mnt
> +       _unmount $tmp/mnt
>         rm -rf $tmp
>         rm -f $tmp.*
>  }
> @@ -56,7 +56,7 @@ _overlay_mount_dirs $SCRATCH_MNT/up $tmp/{upper,work} \
>    overlay $tmp/mnt
>  # accessing file in the second mount
>  cat $tmp/mnt/foo
> -$UMOUNT_PROG $tmp/mnt
> +_unmount $tmp/mnt
>
>  # re-create upper/work to avoid ovl_verify_origin() mount failure
>  # when index is enabled
> @@ -66,7 +66,7 @@ mkdir -p $tmp/{upper,work}
>  _overlay_mount_dirs $SCRATCH_MNT/low $tmp/{upper,work} \
>    overlay $tmp/mnt
>  cat $tmp/mnt/bar
> -$UMOUNT_PROG $tmp/mnt
> +_unmount $tmp/mnt
>
>  rm -rf $tmp/{upper,work}
>  mkdir -p $tmp/{upper,work}
> diff --git a/tests/overlay/031 b/tests/overlay/031
> index dd9dfcdb9..88299ebe2 100755
> --- a/tests/overlay/031
> +++ b/tests/overlay/031
> @@ -28,7 +28,7 @@ create_whiteout()
>
>         rm -f $SCRATCH_MNT/testdir/$file
>
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  # Import common functions.
> @@ -68,7 +68,7 @@ rm -rf $SCRATCH_MNT/testdir 2>&1 | _filter_scratch
>
>  # umount overlay again, create a new file with the same name and
>  # mount overlay again.
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>  touch $lowerdir1/testdir
>
>  _overlay_scratch_mount_dirs $lowerdir1 $upperdir $workdir
> @@ -77,7 +77,7 @@ _overlay_scratch_mount_dirs $lowerdir1 $upperdir $workdir
>  # it will not clean up the dir and lead to residue.
>  rm -rf $SCRATCH_MNT/testdir 2>&1 | _filter_scratch
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # let lower dir have invalid whiteouts, repeat ls and rmdir test again.
>  rm -rf $lowerdir1/testdir
> @@ -92,7 +92,7 @@ _overlay_scratch_mount_dirs "$lowerdir1:$lowerdir2" $upperdir $workdir
>  ls $SCRATCH_MNT/testdir
>  rm -rf $SCRATCH_MNT/testdir 2>&1 | _filter_scratch
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # let lower dir and upper dir both have invalid whiteouts, repeat ls and rmdir again.
>  rm -rf $lowerdir1/testdir
> diff --git a/tests/overlay/035 b/tests/overlay/035
> index 0b3257c4c..14e62ca2e 100755
> --- a/tests/overlay/035
> +++ b/tests/overlay/035
> @@ -43,7 +43,7 @@ mkdir -p $lowerdir1 $lowerdir2 $upperdir $workdir
>  _overlay_scratch_mount_opts -o"lowerdir=$lowerdir2:$lowerdir1"
>  touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
>  $MOUNT_PROG -o remount,rw $SCRATCH_MNT 2>&1 | _filter_ro_mount
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # Make workdir immutable to prevent workdir re-create on mount
>  $CHATTR_PROG +i $workdir
> diff --git a/tests/overlay/036 b/tests/overlay/036
> index 19a181bbd..d94a86c49 100755
> --- a/tests/overlay/036
> +++ b/tests/overlay/036
> @@ -34,8 +34,8 @@ _cleanup()
>         cd /
>         rm -f $tmp.*
>         # unmount the two extra mounts in case they did not fail
> -       $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> -       $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +       _unmount $SCRATCH_MNT 2>/dev/null
> +       _unmount $SCRATCH_MNT 2>/dev/null
>  }
>
>  # Import common functions.
> @@ -66,13 +66,13 @@ _overlay_mount_dirs $lowerdir $upperdir $workdir \
>  # with index=off - expect success
>  _overlay_mount_dirs $lowerdir $upperdir $workdir2 \
>                     overlay0 $SCRATCH_MNT -oindex=off && \
> -                   $UMOUNT_PROG $SCRATCH_MNT
> +                   _unmount $SCRATCH_MNT
>
>  # Try to mount another overlay with the same workdir
>  # with index=off - expect success
>  _overlay_mount_dirs $lowerdir2 $upperdir2 $workdir \
>                     overlay1 $SCRATCH_MNT -oindex=off && \
> -                   $UMOUNT_PROG $SCRATCH_MNT
> +                   _unmount $SCRATCH_MNT
>
>  # Try to mount another overlay with the same upperdir
>  # with index=on - expect EBUSY
> diff --git a/tests/overlay/037 b/tests/overlay/037
> index 834e17638..70aecb065 100755
> --- a/tests/overlay/037
> +++ b/tests/overlay/037
> @@ -39,17 +39,17 @@ mkdir -p $lowerdir $lowerdir2 $upperdir $upperdir2 $workdir
>  # Mount overlay with lowerdir, upperdir, workdir and index=on
>  # to store the file handles of lowerdir and upperdir in overlay.origin xattr
>  _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -oindex=on
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # Try to mount an overlay with the same upperdir and different lowerdir - expect ESTALE
>  _overlay_scratch_mount_dirs $lowerdir2 $upperdir $workdir -oindex=on \
>         2>&1 | _filter_error_mount
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  # Try to mount an overlay with the same workdir and different upperdir - expect ESTALE
>  _overlay_scratch_mount_dirs $lowerdir $upperdir2 $workdir -oindex=on \
>         2>&1 | _filter_error_mount
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  # Mount overlay with original lowerdir, upperdir, workdir and index=on - expect success
>  _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -oindex=on
> diff --git a/tests/overlay/040 b/tests/overlay/040
> index 11c7bf129..aeb4cdc93 100755
> --- a/tests/overlay/040
> +++ b/tests/overlay/040
> @@ -48,7 +48,7 @@ _scratch_mount
>  # modify lower origin file.
>  $CHATTR_PROG +i $SCRATCH_MNT/foo > /dev/null 2>&1
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # touching origin file in lower, should succeed
>  touch $lowerdir/foo
> diff --git a/tests/overlay/041 b/tests/overlay/041
> index 36491b8fa..3517d3652 100755
> --- a/tests/overlay/041
> +++ b/tests/overlay/041
> @@ -142,7 +142,7 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
>  [[ $subdir_d == "subdir d" ]] || \
>         echo "Merged dir: Invalid d_ino reported for subdir"
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # check overlayfs
>  _overlay_check_scratch_dirs $lowerdir $upperdir $workdir -o xino=on
> diff --git a/tests/overlay/042 b/tests/overlay/042
> index aaa10da33..538b87ef9 100755
> --- a/tests/overlay/042
> +++ b/tests/overlay/042
> @@ -45,7 +45,7 @@ _scratch_mount -o index=off
>  # Copy up lower and create upper hardlink with no index
>  ln $SCRATCH_MNT/0 $SCRATCH_MNT/1
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # Add lower hardlinks while overlay is offline
>  ln $lowerdir/0 $lowerdir/2
> diff --git a/tests/overlay/043 b/tests/overlay/043
> index 7325c653a..1683738d7 100755
> --- a/tests/overlay/043
> +++ b/tests/overlay/043
> @@ -126,7 +126,7 @@ echo 3 > /proc/sys/vm/drop_caches
>  check_inode_numbers $testdir $tmp.after_copyup $tmp.after_move
>
>  # Verify that the inode numbers survive a mount cycle
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>  _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -o redirect_dir=on,xino=on
>
>  # Compare inode numbers before/after mount cycle
> diff --git a/tests/overlay/044 b/tests/overlay/044
> index 4d04d883e..e19613c1c 100755
> --- a/tests/overlay/044
> +++ b/tests/overlay/044
> @@ -99,7 +99,7 @@ cat $FILES
>  check_ino_nlink $SCRATCH_MNT $tmp.before $tmp.after_one
>
>  # Verify that the hardlinks survive a mount cycle
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>  _overlay_check_scratch_dirs $lowerdir $upperdir $workdir -o index=on,xino=on
>  _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -o index=on,xino=on
>
> diff --git a/tests/overlay/048 b/tests/overlay/048
> index 897e797e2..3de1fa795 100755
> --- a/tests/overlay/048
> +++ b/tests/overlay/048
> @@ -32,7 +32,7 @@ report_nlink()
>                 _ls_l $SCRATCH_MNT/$f | awk '{ print $2, $9 }' | _filter_scratch
>         done
>
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  # Create lower hardlinks
> @@ -101,7 +101,7 @@ touch $SCRATCH_MNT/1
>  touch $SCRATCH_MNT/2
>
>  # Perform the rest of the changes offline
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  test_hardlinks_offline
>
> diff --git a/tests/overlay/049 b/tests/overlay/049
> index 3ee500c5d..c7f93cb93 100755
> --- a/tests/overlay/049
> +++ b/tests/overlay/049
> @@ -32,7 +32,7 @@ create_redirect()
>         touch $SCRATCH_MNT/origin/file
>         mv $SCRATCH_MNT/origin $SCRATCH_MNT/$redirect
>
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  # Import common functions.
> diff --git a/tests/overlay/050 b/tests/overlay/050
> index ec936e2a7..bff002286 100755
> --- a/tests/overlay/050
> +++ b/tests/overlay/050
> @@ -76,7 +76,7 @@ mount_dirs()
>  # Unmount the overlay without unmounting base fs
>  unmount_dirs()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  # Check non-stale file handles of lower/upper files and verify
> diff --git a/tests/overlay/051 b/tests/overlay/051
> index 9404dbbab..d99d19678 100755
> --- a/tests/overlay/051
> +++ b/tests/overlay/051
> @@ -28,7 +28,7 @@ _cleanup()
>         # Cleanup overlay scratch mount that is holding base test mount
>         # to prevent _check_test_fs and _test_umount from failing before
>         # _check_scratch_fs _scratch_umount
> -       $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +       _unmount $SCRATCH_MNT 2>/dev/null
>  }
>
>  # Import common functions.
> @@ -103,7 +103,7 @@ mount_dirs()
>  # underlying dirs
>  unmount_dirs()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>
>         _overlay_check_scratch_dirs $middle:$lower $upper $work \
>                                 -o "index=on,nfs_export=on"
> diff --git a/tests/overlay/052 b/tests/overlay/052
> index 37402067d..9b53cd78a 100755
> --- a/tests/overlay/052
> +++ b/tests/overlay/052
> @@ -73,7 +73,7 @@ mount_dirs()
>  # Unmount the overlay without unmounting base fs
>  unmount_dirs()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  # Check non-stale file handles of lower/upper moved files
> diff --git a/tests/overlay/053 b/tests/overlay/053
> index f7891aced..13a4873ee 100755
> --- a/tests/overlay/053
> +++ b/tests/overlay/053
> @@ -30,7 +30,7 @@ _cleanup()
>         # Cleanup overlay scratch mount that is holding base test mount
>         # to prevent _check_test_fs and _test_umount from failing before
>         # _check_scratch_fs _scratch_umount
> -       $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +       _unmount $SCRATCH_MNT 2>/dev/null
>  }
>
>  # Import common functions.
> @@ -99,7 +99,7 @@ mount_dirs()
>  # underlying dirs
>  unmount_dirs()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>
>         _overlay_check_scratch_dirs $middle:$lower $upper $work \
>                                 -o "index=on,nfs_export=on,redirect_dir=on"
> diff --git a/tests/overlay/054 b/tests/overlay/054
> index 8d7f026a2..260c95d50 100755
> --- a/tests/overlay/054
> +++ b/tests/overlay/054
> @@ -87,7 +87,7 @@ mount_dirs()
>  # Unmount the overlay without unmounting base fs
>  unmount_dirs()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  # Check encode/decode/read file handles of dir with non-indexed ancestor
> diff --git a/tests/overlay/055 b/tests/overlay/055
> index 87a348c94..84ce631f0 100755
> --- a/tests/overlay/055
> +++ b/tests/overlay/055
> @@ -37,7 +37,7 @@ _cleanup()
>         # Cleanup overlay scratch mount that is holding base test mount
>         # to prevent _check_test_fs and _test_umount from failing before
>         # _check_scratch_fs _scratch_umount
> -       $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +       _unmount $SCRATCH_MNT 2>/dev/null
>  }
>
>  # Import common functions.
> @@ -109,7 +109,7 @@ mount_dirs()
>  # underlying dirs
>  unmount_dirs()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>
>         _overlay_check_scratch_dirs $middle:$lower $upper $work \
>                                 -o "index=on,nfs_export=on,redirect_dir=on"
> diff --git a/tests/overlay/056 b/tests/overlay/056
> index 158f34d05..72da81fe0 100755
> --- a/tests/overlay/056
> +++ b/tests/overlay/056
> @@ -73,7 +73,7 @@ mkdir $lowerdir/testdir2/subdir
>  _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir
>  touch $SCRATCH_MNT/testdir1/foo
>  touch $SCRATCH_MNT/testdir2/subdir
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>  remove_impure $upperdir/testdir1
>  remove_impure $upperdir/testdir2
>
> diff --git a/tests/overlay/057 b/tests/overlay/057
> index da7ffda30..325675d54 100755
> --- a/tests/overlay/057
> +++ b/tests/overlay/057
> @@ -48,7 +48,7 @@ _overlay_scratch_mount_dirs $lowerdir $lowerdir2 $workdir2 -o redirect_dir=on
>  # Create opaque parent with absolute redirect child in middle layer
>  mkdir $SCRATCH_MNT/pure
>  mv $SCRATCH_MNT/origin $SCRATCH_MNT/pure/redirect
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>  _overlay_scratch_mount_dirs $lowerdir2:$lowerdir $upperdir $workdir -o redirect_dir=on
>  mv $SCRATCH_MNT/pure/redirect $SCRATCH_MNT/redirect
>  # List content of renamed merge dir before mount cycle
> @@ -56,7 +56,7 @@ ls $SCRATCH_MNT/redirect/
>
>  # Verify that redirects are followed by listing content of renamed merge dir
>  # after mount cycle
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>  _overlay_scratch_mount_dirs $lowerdir2:$lowerdir $upperdir $workdir -o redirect_dir=on
>  ls $SCRATCH_MNT/redirect/
>
> diff --git a/tests/overlay/059 b/tests/overlay/059
> index c48d2a82c..9b9263c09 100755
> --- a/tests/overlay/059
> +++ b/tests/overlay/059
> @@ -33,7 +33,7 @@ create_origin_ref()
>         _scratch_mount -o redirect_dir=on
>         mv $SCRATCH_MNT/origin $SCRATCH_MNT/$ref
>
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  # Import common functions.
> diff --git a/tests/overlay/060 b/tests/overlay/060
> index bb61fcfa6..05dab179d 100755
> --- a/tests/overlay/060
> +++ b/tests/overlay/060
> @@ -130,7 +130,7 @@ mount_ro_overlay()
>
>  umount_overlay()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  # Assumes it is called with overlay mounted.
> diff --git a/tests/overlay/062 b/tests/overlay/062
> index e44628b74..4290fbc85 100755
> --- a/tests/overlay/062
> +++ b/tests/overlay/062
> @@ -18,7 +18,7 @@ _cleanup()
>  {
>         cd /
>         rm -f $tmp.*
> -       $UMOUNT_PROG $lowertestdir
> +       _unmount $lowertestdir
>  }
>
>  # Import common functions.
> diff --git a/tests/overlay/063 b/tests/overlay/063
> index d9f30606a..b0468cd58 100755
> --- a/tests/overlay/063
> +++ b/tests/overlay/063
> @@ -40,7 +40,7 @@ rm ${upperdir}/file
>  mkdir ${SCRATCH_MNT}/file > /dev/null 2>&1
>
>  # unmount overlayfs
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  echo "Silence is golden"
>  # success, all done
> diff --git a/tests/overlay/065 b/tests/overlay/065
> index fb6d6dd1b..08ada3242 100755
> --- a/tests/overlay/065
> +++ b/tests/overlay/065
> @@ -30,7 +30,7 @@ _cleanup()
>  {
>         cd /
>         rm -f $tmp.*
> -       $UMOUNT_PROG $mnt2 2>/dev/null
> +       _unmount $mnt2 2>/dev/null
>  }
>
>  # Import common functions.
> @@ -63,7 +63,7 @@ mkdir -p $lowerdir/lower $upperdir $workdir
>  echo Conflicting upperdir/lowerdir
>  _overlay_scratch_mount_dirs $upperdir $upperdir $workdir \
>         2>&1 | _filter_error_mount
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  # Use new upper/work dirs for each test to avoid ESTALE errors
>  # on mismatch lowerdir/upperdir (see test overlay/037)
> @@ -75,7 +75,7 @@ mkdir $upperdir $workdir
>  echo Conflicting workdir/lowerdir
>  _overlay_scratch_mount_dirs $workdir $upperdir $workdir \
>         -oindex=off 2>&1 | _filter_error_mount
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  rm -rf $upperdir $workdir
>  mkdir -p $upperdir/lower $workdir
> @@ -85,7 +85,7 @@ mkdir -p $upperdir/lower $workdir
>  echo Overlapping upperdir/lowerdir
>  _overlay_scratch_mount_dirs $upperdir/lower $upperdir $workdir \
>         2>&1 | _filter_error_mount
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  rm -rf $upperdir $workdir
>  mkdir $upperdir $workdir
> @@ -94,7 +94,7 @@ mkdir $upperdir $workdir
>  echo Conflicting lower layers
>  _overlay_scratch_mount_dirs $lowerdir:$lowerdir $upperdir $workdir \
>         2>&1 | _filter_error_mount
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  rm -rf $upperdir $workdir
>  mkdir $upperdir $workdir
> @@ -103,7 +103,7 @@ mkdir $upperdir $workdir
>  echo Overlapping lower layers below
>  _overlay_scratch_mount_dirs $lowerdir:$lowerdir/lower $upperdir $workdir \
>         2>&1 | _filter_error_mount
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  rm -rf $upperdir $workdir
>  mkdir $upperdir $workdir
> @@ -112,7 +112,7 @@ mkdir $upperdir $workdir
>  echo Overlapping lower layers above
>  _overlay_scratch_mount_dirs $lowerdir/lower:$lowerdir $upperdir $workdir \
>         2>&1 | _filter_error_mount
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  rm -rf $upperdir $workdir
>  mkdir -p $upperdir/upper $workdir $mnt2
> @@ -129,14 +129,14 @@ mkdir -p $upperdir2 $workdir2 $mnt2
>  echo "Overlapping with upperdir of another instance (index=on)"
>  _overlay_scratch_mount_dirs $upperdir/upper $upperdir2 $workdir2 \
>         -oindex=on 2>&1 | _filter_busy_mount
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  rm -rf $upperdir2 $workdir2
>  mkdir -p $upperdir2 $workdir2
>
>  echo "Overlapping with upperdir of another instance (index=off)"
>  _overlay_scratch_mount_dirs $upperdir/upper $upperdir2 $workdir2 \
> -       -oindex=off && $UMOUNT_PROG $SCRATCH_MNT
> +       -oindex=off && _unmount $SCRATCH_MNT
>
>  rm -rf $upperdir2 $workdir2
>  mkdir -p $upperdir2 $workdir2
> @@ -146,14 +146,14 @@ mkdir -p $upperdir2 $workdir2
>  echo "Overlapping with workdir of another instance (index=on)"
>  _overlay_scratch_mount_dirs $workdir/work $upperdir2 $workdir2 \
>         -oindex=on 2>&1 | _filter_busy_mount
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  rm -rf $upperdir2 $workdir2
>  mkdir -p $upperdir2 $workdir2
>
>  echo "Overlapping with workdir of another instance (index=off)"
>  _overlay_scratch_mount_dirs $workdir/work $upperdir2 $workdir2 \
> -       -oindex=off && $UMOUNT_PROG $SCRATCH_MNT
> +       -oindex=off && _unmount $SCRATCH_MNT
>
>  # Move upper layer root into lower layer after mount
>  echo Overlapping upperdir/lowerdir after mount
> diff --git a/tests/overlay/067 b/tests/overlay/067
> index bb09a6042..4b57675e2 100755
> --- a/tests/overlay/067
> +++ b/tests/overlay/067
> @@ -70,7 +70,7 @@ stat $testfile >>$seqres.full
>  diff -q $realfile $testfile >>$seqres.full &&
>         echo "diff with middle layer file doesn't know right from wrong! (cold cache)"
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>  # check overlayfs
>  _overlay_check_scratch_dirs $middle:$lower $upper $work -o xino=off
>
> diff --git a/tests/overlay/068 b/tests/overlay/068
> index 0d33cf12d..66b1b49ca 100755
> --- a/tests/overlay/068
> +++ b/tests/overlay/068
> @@ -28,7 +28,7 @@ _cleanup()
>         cd /
>         rm -f $tmp.*
>         # Unmount the nested overlay mount
> -       $UMOUNT_PROG $mnt2 2>/dev/null
> +       _unmount $mnt2 2>/dev/null
>  }
>
>  # Import common functions.
> @@ -100,7 +100,7 @@ mount_dirs()
>  unmount_dirs()
>  {
>         # unmount & check nested overlay
> -       $UMOUNT_PROG $mnt2
> +       _unmount $mnt2
>         _overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
>                 -o "index=on,nfs_export=on,redirect_dir=on"
>
> diff --git a/tests/overlay/069 b/tests/overlay/069
> index 373ab1ee3..b145ad8e2 100755
> --- a/tests/overlay/069
> +++ b/tests/overlay/069
> @@ -28,7 +28,7 @@ _cleanup()
>         cd /
>         rm -f $tmp.*
>         # Unmount the nested overlay mount
> -       $UMOUNT_PROG $mnt2 2>/dev/null
> +       _unmount $mnt2 2>/dev/null
>  }
>
>  # Import common functions.
> @@ -108,12 +108,12 @@ mount_dirs()
>  unmount_dirs()
>  {
>         # unmount & check nested overlay
> -       $UMOUNT_PROG $mnt2
> +       _unmount $mnt2
>         _overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
>                 -o "index=on,nfs_export=on,redirect_dir=on"
>
>         # unmount & check underlying overlay
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>         _overlay_check_dirs $lower $upper $work \
>                 -o "index=on,nfs_export=on,redirect_dir=on"
>  }
> diff --git a/tests/overlay/070 b/tests/overlay/070
> index 36991229f..078dda417 100755
> --- a/tests/overlay/070
> +++ b/tests/overlay/070
> @@ -26,7 +26,7 @@ _cleanup()
>         cd /
>         rm -f $tmp.*
>         # Unmount the nested overlay mount
> -       $UMOUNT_PROG $mnt2 2>/dev/null
> +       _unmount $mnt2 2>/dev/null
>         [ -z "$loopdev" ] || _destroy_loop_device $loopdev
>  }
>
> @@ -93,12 +93,12 @@ mount_dirs()
>  unmount_dirs()
>  {
>         # unmount & check nested overlay
> -       $UMOUNT_PROG $mnt2
> +       _unmount $mnt2
>         _overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
>                 -o "redirect_dir=on,index=on,xino=on"
>
>         # unmount & check underlying overlay
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>         _overlay_check_scratch_dirs $lower $upper $work \
>                 -o "index=on,nfs_export=on"
>  }
> diff --git a/tests/overlay/071 b/tests/overlay/071
> index 2a6313142..1954d0cb1 100755
> --- a/tests/overlay/071
> +++ b/tests/overlay/071
> @@ -29,7 +29,7 @@ _cleanup()
>         cd /
>         rm -f $tmp.*
>         # Unmount the nested overlay mount
> -       $UMOUNT_PROG $mnt2 2>/dev/null
> +       _unmount $mnt2 2>/dev/null
>         [ -z "$loopdev" ] || _destroy_loop_device $loopdev
>  }
>
> @@ -103,12 +103,12 @@ mount_dirs()
>  unmount_dirs()
>  {
>         # unmount & check nested overlay
> -       $UMOUNT_PROG $mnt2
> +       _unmount $mnt2
>         _overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
>                 -o "redirect_dir=on,index=on,xino=on"
>
>         # unmount & check underlying overlay
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>         _overlay_check_dirs $lower $upper $work \
>                 -o "index=on,nfs_export=on"
>  }
> diff --git a/tests/overlay/076 b/tests/overlay/076
> index fb94dff68..a137ac803 100755
> --- a/tests/overlay/076
> +++ b/tests/overlay/076
> @@ -47,7 +47,7 @@ _scratch_mount
>  # on kernel v5.10..v5.10.14.  Anything but hang is considered a test success.
>  $CHATTR_PROG +i $SCRATCH_MNT/foo > /dev/null 2>&1
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # success, all done
>  echo "Silence is golden"
> diff --git a/tests/overlay/077 b/tests/overlay/077
> index 00de0825a..a322709e8 100755
> --- a/tests/overlay/077
> +++ b/tests/overlay/077
> @@ -65,7 +65,7 @@ mv $SCRATCH_MNT/f100 $SCRATCH_MNT/former/
>
>  # Remove the lower directory and mount overlay again to create
>  # a "former merge dir"
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>  rm -rf $lowerdir/former
>  _scratch_mount
>
> diff --git a/tests/overlay/078 b/tests/overlay/078
> index d6df11f68..0ee9e54d9 100755
> --- a/tests/overlay/078
> +++ b/tests/overlay/078
> @@ -61,7 +61,7 @@ do_check()
>
>         echo "Test chattr +$1 $2" >> $seqres.full
>
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>
>         # Add attribute to lower file
>         $CHATTR_PROG +$attr $lowertestfile
> diff --git a/tests/overlay/079 b/tests/overlay/079
> index cfcafceea..2ea9ba93b 100755
> --- a/tests/overlay/079
> +++ b/tests/overlay/079
> @@ -156,7 +156,7 @@ mount_ro_overlay()
>
>  umount_overlay()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  test_no_access()
> diff --git a/tests/overlay/080 b/tests/overlay/080
> index ce5c2375f..77fd8dbfe 100755
> --- a/tests/overlay/080
> +++ b/tests/overlay/080
> @@ -264,7 +264,7 @@ mount_overlay()
>
>  umount_overlay()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>
> diff --git a/tests/overlay/081 b/tests/overlay/081
> index 2270a0475..39eac6466 100755
> --- a/tests/overlay/081
> +++ b/tests/overlay/081
> @@ -46,7 +46,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
>         echo "Overlayfs (uuid=null) and upper fs fsid differ"
>
>  # Keep base fs mounted in case it has a volatile fsid (e.g. tmpfs)
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # Test legacy behavior is preserved by default for existing "impure" overlayfs
>  _scratch_mount
> @@ -55,7 +55,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
>  [[ "$ovl_fsid" == "$upper_fsid" ]] || \
>         echo "Overlayfs (after uuid=null) and upper fs fsid differ"
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # Test unique fsid on explicit opt-in for existing "impure" overlayfs
>  _scratch_mount -o uuid=on
> @@ -65,7 +65,7 @@ ovl_unique_fsid=$ovl_fsid
>  [[ "$ovl_fsid" != "$upper_fsid" ]] || \
>         echo "Overlayfs (uuid=on) and upper fs fsid are the same"
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # Test unique fsid is persistent by default after it was created
>  _scratch_mount
> @@ -74,7 +74,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
>  [[ "$ovl_fsid" == "$ovl_unique_fsid" ]] || \
>         echo "Overlayfs (after uuid=on) unique fsid is not persistent"
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # Test ignore existing persistent fsid on explicit opt-out
>  _scratch_mount -o uuid=null
> @@ -83,7 +83,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
>  [[ "$ovl_fsid" == "$upper_fsid" ]] || \
>         echo "Overlayfs (uuid=null) and upper fs fsid differ"
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # Test fallback to uuid=null with non-upper ovelray
>  _overlay_scratch_mount_dirs "$upperdir:$lowerdir" "-" "-" -o ro,uuid=on
> @@ -110,7 +110,7 @@ ovl_unique_fsid=$ovl_fsid
>  [[ "$ovl_fsid" != "$upper_fsid" ]] || \
>         echo "Overlayfs (new) and upper fs fsid are the same"
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  # Test unique fsid is persistent by default after it was created
>  _scratch_mount -o uuid=on
> @@ -119,7 +119,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
>  [[ "$ovl_fsid" == "$ovl_unique_fsid" ]] || \
>         echo "Overlayfs (uuid=on) unique fsid is not persistent"
>
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>
>  echo "Silence is golden"
>  status=0
> diff --git a/tests/overlay/083 b/tests/overlay/083
> index d037d4c85..551471d45 100755
> --- a/tests/overlay/083
> +++ b/tests/overlay/083
> @@ -52,7 +52,7 @@ $MOUNT_PROG -t overlay | grep ovl_esc_test  | tee -a $seqres.full | grep -v spac
>
>  # Re-create the upper/work dirs to mount them with a different lower
>  # This is required in case index feature is enabled
> -$UMOUNT_PROG $SCRATCH_MNT
> +_unmount $SCRATCH_MNT
>  rm -rf "$upperdir" "$workdir"
>  mkdir -p "$upperdir" "$workdir"
>
> diff --git a/tests/overlay/084 b/tests/overlay/084
> index 28e9a76dc..d0bf06ecb 100755
> --- a/tests/overlay/084
> +++ b/tests/overlay/084
> @@ -15,7 +15,7 @@ _cleanup()
>  {
>         cd /
>         # Unmount nested mounts if things fail
> -       $UMOUNT_PROG $OVL_BASE_SCRATCH_MNT/nested  2>/dev/null
> +       _unmount $OVL_BASE_SCRATCH_MNT/nested  2>/dev/null
>         rm -rf $tmp
>  }
>
> @@ -44,7 +44,7 @@ nesteddir=$OVL_BASE_SCRATCH_MNT/nested
>
>  umount_overlay()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  test_escape()
> @@ -88,12 +88,12 @@ test_escape()
>         echo "nested xattr mount with trusted.overlay"
>         _overlay_mount_dirs $SCRATCH_MNT/layer2:$SCRATCH_MNT/layer1 - - overlayfs $nesteddir
>         stat $nesteddir/dir/file  2>&1 | _filter_scratch
> -       $UMOUNT_PROG $nesteddir
> +       _unmount $nesteddir
>
>         echo "nested xattr mount with user.overlay"
>         _overlay_mount_dirs $SCRATCH_MNT/layer2:$SCRATCH_MNT/layer1 - - -o userxattr overlayfs $nesteddir
>         stat $nesteddir/dir/file  2>&1 | _filter_scratch
> -       $UMOUNT_PROG $nesteddir
> +       _unmount $nesteddir
>
>         # Also ensure propagate the escaped xattr when we copy-up layer2/dir
>         echo "copy-up of escaped xattrs"
> @@ -164,7 +164,7 @@ test_escaped_xwhiteout()
>
>         do_test_xwhiteout $prefix $nesteddir
>
> -       $UMOUNT_PROG $nesteddir
> +       _unmount $nesteddir
>  }
>
>  test_escaped_xwhiteout trusted
> diff --git a/tests/overlay/085 b/tests/overlay/085
> index 046d01d16..95665fba8 100755
> --- a/tests/overlay/085
> +++ b/tests/overlay/085
> @@ -157,7 +157,7 @@ mount_ro_overlay()
>
>  umount_overlay()
>  {
> -       $UMOUNT_PROG $SCRATCH_MNT
> +       _unmount $SCRATCH_MNT
>  }
>
>  test_no_access()
> diff --git a/tests/overlay/086 b/tests/overlay/086
> index 9c8a00588..d0b2a76ca 100755
> --- a/tests/overlay/086
> +++ b/tests/overlay/086
> @@ -38,21 +38,21 @@ $MOUNT_PROG -t overlay none $SCRATCH_MNT \
>         2>> $seqres.full && \
>         echo "ERROR: invalid combination of lowerdir and lowerdir+ mount options"
>
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  $MOUNT_PROG -t overlay none $SCRATCH_MNT \
>         -o"lowerdir=$lowerdir,datadir+=$lowerdir_colons" \
>         -o redirect_dir=follow,metacopy=on 2>> $seqres.full && \
>         echo "ERROR: invalid combination of lowerdir and datadir+ mount options"
>
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  $MOUNT_PROG -t overlay none $SCRATCH_MNT \
>         -o"datadir+=$lowerdir,lowerdir+=$lowerdir_colons" \
>         -o redirect_dir=follow,metacopy=on 2>> $seqres.full && \
>         echo "ERROR: invalid order of lowerdir+ and datadir+ mount options"
>
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  # mount is expected to fail with escaped colons.
>  $MOUNT_PROG -t overlay none $SCRATCH_MNT \
> @@ -60,7 +60,7 @@ $MOUNT_PROG -t overlay none $SCRATCH_MNT \
>         2>> $seqres.full && \
>         echo "ERROR: incorrect parsing of escaped colons in lowerdir+ mount option"
>
> -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> +_unmount $SCRATCH_MNT 2>/dev/null
>
>  # mount is expected to succeed without escaped colons.
>  $MOUNT_PROG -t overlay ovl_esc_test $SCRATCH_MNT \

Re: [PATCH] fstests: finish UMOUNT_PROG to _unmount conversion

[Darrick J. Wong]

On Wed, Feb 26, 2025 at 10:37:20AM +0000, Filipe Manana wrote:
> On Tue, Feb 25, 2025 at 10:19 PM Dave Chinner <david@fromorbit.com> wrote:
> >
> > On Thu, Feb 20, 2025 at 08:18:19PM -0800, Darrick J. Wong wrote:
> > > On Thu, Feb 20, 2025 at 06:22:57PM +0000, Filipe Manana wrote:
> > > > On Thu, Feb 20, 2025 at 5:03 PM Darrick J. Wong <djwong@kernel.org> wrote:
> > > > >
> > > > > On Thu, Feb 20, 2025 at 01:27:32PM +0800, Anand Jain wrote:
> > > > > > On 20/2/25 02:19, fdmanana@kernel.org wrote:
> > > > > > > From: Filipe Manana <fdmanana@suse.com>
> > > > > > >
> > > > > > > If the test fails or is interrupted after mounting $scratch_dev3 inside
> > > > > > > the test filesystem and before unmounting at test_add_device(), we leave
> > > > > > > without being unable to unmount the test filesystem since it has a mount
> > > > > > > inside it. This results in the need to manually unmount $scratch_dev3,
> > > > > > > otherwise a subsequent run of fstests fails since the unmount of the
> > > > > > > test device fails with -EBUSY.
> > > > > > >
> > > > > > > Fix this by unmounting $scratch_dev3 ($seq_mnt) in the _cleanup()
> > > > > > > function.
> > > > > > >
> > > > > > > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > > > > > > ---
> > > > > > >   tests/btrfs/254 | 1 +
> > > > > > >   1 file changed, 1 insertion(+)
> > > > > > >
> > > > > > > diff --git a/tests/btrfs/254 b/tests/btrfs/254
> > > > > > > index d9c9eea9..6523389b 100755
> > > > > > > --- a/tests/btrfs/254
> > > > > > > +++ b/tests/btrfs/254
> > > > > > > @@ -21,6 +21,7 @@ _cleanup()
> > > > > > >   {
> > > > > > >     cd /
> > > > > > >     rm -f $tmp.*
> > > > > > > +   $UMOUNT_PROG $seq_mnt > /dev/null 2>&1
> > > > >
> > > > > This should use the _unmount helper that's in for-next.
> > > >
> > > > Sure, it does the same, except that it redirects stdout and stderr to
> > > > $seqres.full.
> > > >
> > > > Some tests are still calling  $UMOUNT_PROG directly. And that's often
> > > > what we want, so that if umount fails we get a mismatch with the
> > > > golden output instead of ignoring the failure.
> > > > But in this case it's fine.
> > >
> > > <groan> You're right, I'd repressed that Chinner decided to introduce
> > > _unmount so that he could improve logging of unmount failures but then
> > > he only bothered converting tests/{generic,xfs} because he didn't give
> > > a damn about anyone else.
> >
> > That's uncalled for, Darrick.
> >
> > You know very well that I posted an incomplete RFC that I was asking
> > for reveiw on, not for it to be merged. The maintainer decided to
> > merge it and did not wait for me to finish the conversions.
> >
> > > Now fstests is stuck with a half finished conversion and no clarity
> > > about whether the rest of the $UMOUNT_PROG invocations should be
> > > converted to _umount or if those are somehow intentional.
> > >
> > > Hey Zorro, do you have any opinion on this?  Should someone just finish
> > > the $UMOUNT_PROG -> _unmount conversion next week?
> >
> > Why put it off? With the logging fixes to _unmount() that are
> > already merged, it's a purely mechanical change using sed. Patch
> > below.
> >
> > -Dave.
> >
> > --
> > Dave Chinner
> > david@fromorbit.com
> >
> > fstests: finish UMOUNT_PROG to _unmount conversion
> >
> > From: Dave Chinner <dchinner@redhat.com>
> >
> > Because only tests/generic and tests/xfs have been converted so far
> > and the conversion needs finishing. _unmount is a drop-in
> > replacement for $UMOUNT_PROG, so we can simply do a mechanical
> > conversion like so:
> >
> > $ sed -i s/\$UMOUNT_PROG/_unmount/g tests/*/*
> >
> > Signed-off-by: Dave Chinner <dchinner@redhat.com>
> > ---
> >  tests/btrfs/020   |  2 +-
> >  tests/btrfs/029   |  2 +-
> >  tests/btrfs/031   |  2 +-
> >  tests/btrfs/060   |  2 +-
> >  tests/btrfs/065   |  2 +-
> >  tests/btrfs/066   |  2 +-
> >  tests/btrfs/067   |  2 +-
> >  tests/btrfs/068   |  2 +-
> >  tests/btrfs/075   |  2 +-
> >  tests/btrfs/089   |  2 +-
> >  tests/btrfs/124   |  2 +-
> >  tests/btrfs/125   |  2 +-
> >  tests/btrfs/185   |  4 ++--
> >  tests/btrfs/197   |  4 ++--
> >  tests/btrfs/219   | 12 ++++++------
> >  tests/btrfs/254   |  2 +-
> >  tests/btrfs/311   |  2 +-
> >  tests/btrfs/313   |  2 +-
> >  tests/btrfs/314   |  2 +-
> >  tests/btrfs/315   |  2 +-
> >  tests/btrfs/318   |  6 +++---
> >  tests/btrfs/326   | 10 +++++-----
> >  tests/btrfs/330   |  4 ++--
> >  tests/ext4/032    |  4 ++--
> >  tests/ext4/052    |  4 ++--
> >  tests/ext4/053    | 32 ++++++++++++++++----------------
> >  tests/ext4/056    |  2 +-
> >  tests/overlay/003 |  2 +-
> >  tests/overlay/004 |  2 +-
> >  tests/overlay/005 |  6 +++---
> >  tests/overlay/014 |  4 ++--
> >  tests/overlay/022 |  2 +-
> >  tests/overlay/025 |  4 ++--
> >  tests/overlay/029 |  6 +++---
> >  tests/overlay/031 |  8 ++++----
> >  tests/overlay/035 |  2 +-
> >  tests/overlay/036 |  8 ++++----
> >  tests/overlay/037 |  6 +++---
> >  tests/overlay/040 |  2 +-
> >  tests/overlay/041 |  2 +-
> >  tests/overlay/042 |  2 +-
> >  tests/overlay/043 |  2 +-
> >  tests/overlay/044 |  2 +-
> >  tests/overlay/048 |  4 ++--
> >  tests/overlay/049 |  2 +-
> >  tests/overlay/050 |  2 +-
> >  tests/overlay/051 |  4 ++--
> >  tests/overlay/052 |  2 +-
> >  tests/overlay/053 |  4 ++--
> >  tests/overlay/054 |  2 +-
> >  tests/overlay/055 |  4 ++--
> >  tests/overlay/056 |  2 +-
> >  tests/overlay/057 |  4 ++--
> >  tests/overlay/059 |  2 +-
> >  tests/overlay/060 |  2 +-
> >  tests/overlay/062 |  2 +-
> >  tests/overlay/063 |  2 +-
> >  tests/overlay/065 | 22 +++++++++++-----------
> >  tests/overlay/067 |  2 +-
> >  tests/overlay/068 |  4 ++--
> >  tests/overlay/069 |  6 +++---
> >  tests/overlay/070 |  6 +++---
> >  tests/overlay/071 |  6 +++---
> >  tests/overlay/076 |  2 +-
> >  tests/overlay/077 |  2 +-
> >  tests/overlay/078 |  2 +-
> >  tests/overlay/079 |  2 +-
> >  tests/overlay/080 |  2 +-
> >  tests/overlay/081 | 14 +++++++-------
> >  tests/overlay/083 |  2 +-
> >  tests/overlay/084 | 10 +++++-----
> >  tests/overlay/085 |  2 +-
> >  tests/overlay/086 |  8 ++++----
> >  73 files changed, 153 insertions(+), 153 deletions(-)
> >
> > diff --git a/tests/btrfs/020 b/tests/btrfs/020
> > index 7e5c6fd7b..badb76f75 100755
> > --- a/tests/btrfs/020
> > +++ b/tests/btrfs/020
> > @@ -17,7 +17,7 @@ _cleanup()
> >  {
> >         cd /
> >         rm -f $tmp.*
> > -       $UMOUNT_PROG $loop_mnt
> > +       _unmount $loop_mnt
> >         _destroy_loop_device $loop_dev1
> >         losetup -d $loop_dev2 >/dev/null 2>&1
> >         _destroy_loop_device $loop_dev3
> > diff --git a/tests/btrfs/029 b/tests/btrfs/029
> > index c37ad63fb..1f8201af3 100755
> > --- a/tests/btrfs/029
> > +++ b/tests/btrfs/029
> > @@ -74,7 +74,7 @@ cp --reflink=always $orig_file $copy_file >> $seqres.full 2>&1 || echo "cp refli
> >  md5sum $orig_file | _filter_testdir_and_scratch
> >  md5sum $copy_file | _filter_testdir_and_scratch
> >
> > -$UMOUNT_PROG $reflink_test_dir
> > +_unmount $reflink_test_dir
> 
> This isn't equivalent to directly calling UMOUNT_PROG since the
> _unmount helper always redirects stdout and stderr to $seqres.full.
> Meaning failures may often be ignored or not immediately obvious as before.
> 
> This applies to many other places, just picking the first to comment.

_unmount was restored to its old behavior of emitting stdout/stderr in
this past Sunday's push to for-next because the forced redirection broke
several tests.

--D

> >
> >  # success, all done
> >  status=0
> > diff --git a/tests/btrfs/031 b/tests/btrfs/031
> > index 8ac73d3a8..12ad84c64 100755
> > --- a/tests/btrfs/031
> > +++ b/tests/btrfs/031
> > @@ -99,7 +99,7 @@ mv $testdir2/file* $subvol2/
> >  echo "Verify the file contents:"
> >  _checksum_files
> >
> > -$UMOUNT_PROG $cross_mount_test_dir
> > +_unmount $cross_mount_test_dir
> >
> >  # success, all done
> >  status=0
> > diff --git a/tests/btrfs/060 b/tests/btrfs/060
> > index 21f15ec89..fff9bed81 100755
> > --- a/tests/btrfs/060
> > +++ b/tests/btrfs/060
> > @@ -76,7 +76,7 @@ run_test()
> >         fi
> >
> >         # in case the subvolume is still mounted
> > -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> > +       _unmount $subvol_mnt >/dev/null 2>&1
> 
> And here there's no point of having the redirections, since the helper
> always redirects stdout/stderr to $seqres.full.
> So it could be removed to make things more readable.
> 
> This also applies to many other places, just picking the first to comment.
> 
> Thanks.
> 
> >         _scratch_unmount
> >         # we called _require_scratch_nocheck instead of _require_scratch
> >         # do check after test for each profile config
> > diff --git a/tests/btrfs/065 b/tests/btrfs/065
> > index f0c9ffb04..77ec89038 100755
> > --- a/tests/btrfs/065
> > +++ b/tests/btrfs/065
> > @@ -84,7 +84,7 @@ run_test()
> >         fi
> >
> >         # in case the subvolume is still mounted
> > -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> > +       _unmount $subvol_mnt >/dev/null 2>&1
> >         _scratch_unmount
> >         # we called _require_scratch_nocheck instead of _require_scratch
> >         # do check after test for each profile config
> > diff --git a/tests/btrfs/066 b/tests/btrfs/066
> > index e3a083b94..07ed799a5 100755
> > --- a/tests/btrfs/066
> > +++ b/tests/btrfs/066
> > @@ -76,7 +76,7 @@ run_test()
> >         fi
> >
> >         # in case the subvolume is still mounted
> > -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> > +       _unmount $subvol_mnt >/dev/null 2>&1
> >         _scratch_unmount
> >         # we called _require_scratch_nocheck instead of _require_scratch
> >         # do check after test for each profile config
> > diff --git a/tests/btrfs/067 b/tests/btrfs/067
> > index 768993116..17c772d04 100755
> > --- a/tests/btrfs/067
> > +++ b/tests/btrfs/067
> > @@ -77,7 +77,7 @@ run_test()
> >         fi
> >
> >         # in case the subvolume is still mounted
> > -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> > +       _unmount $subvol_mnt >/dev/null 2>&1
> >         _scratch_unmount
> >         # we called _require_scratch_nocheck instead of _require_scratch
> >         # do check after test for each profile config
> > diff --git a/tests/btrfs/068 b/tests/btrfs/068
> > index 3d221259f..37b6b6ba8 100755
> > --- a/tests/btrfs/068
> > +++ b/tests/btrfs/068
> > @@ -77,7 +77,7 @@ run_test()
> >         fi
> >
> >         # in case the subvolume is still mounted
> > -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> > +       _unmount $subvol_mnt >/dev/null 2>&1
> >         _scratch_unmount
> >         # we called _require_scratch_nocheck instead of _require_scratch
> >         # do check after test for each profile config
> > diff --git a/tests/btrfs/075 b/tests/btrfs/075
> > index 917993ca2..328dc5f68 100755
> > --- a/tests/btrfs/075
> > +++ b/tests/btrfs/075
> > @@ -15,7 +15,7 @@ _cleanup()
> >  {
> >         cd /
> >         rm -f $tmp.*
> > -       $UMOUNT_PROG $subvol_mnt >/dev/null 2>&1
> > +       _unmount $subvol_mnt >/dev/null 2>&1
> >  }
> >
> >  . ./common/filter
> > diff --git a/tests/btrfs/089 b/tests/btrfs/089
> > index 8f8e37b6f..8c06535d9 100755
> > --- a/tests/btrfs/089
> > +++ b/tests/btrfs/089
> > @@ -35,7 +35,7 @@ mount --bind "$SCRATCH_MNT/testvol/testdir" "$SCRATCH_MNT/testvol/mnt"
> >  $BTRFS_UTIL_PROG subvolume delete "$SCRATCH_MNT/testvol" >>$seqres.full 2>&1
> >
> >  # Unmount the bind mount, which should still be alive.
> > -$UMOUNT_PROG "$SCRATCH_MNT/testvol/mnt"
> > +_unmount "$SCRATCH_MNT/testvol/mnt"
> >
> >  echo "Silence is golden"
> >  status=0
> > diff --git a/tests/btrfs/124 b/tests/btrfs/124
> > index af079c286..7c33a8fab 100755
> > --- a/tests/btrfs/124
> > +++ b/tests/btrfs/124
> > @@ -132,7 +132,7 @@ if [ "$checkpoint1" != "$checkpoint3" ]; then
> >         echo "Inital sum does not match with data on dev2 written by balance"
> >  fi
> >
> > -$UMOUNT_PROG $dev2
> > +_unmount $dev2
> >  _scratch_dev_pool_put
> >  _btrfs_rescan_devices
> >  _test_mount
> > diff --git a/tests/btrfs/125 b/tests/btrfs/125
> > index c8c0dd422..790f35d55 100755
> > --- a/tests/btrfs/125
> > +++ b/tests/btrfs/125
> > @@ -144,7 +144,7 @@ if [ "$checkpoint1" != "$checkpoint3" ]; then
> >         echo "Inital sum does not match with data on dev2 written by balance"
> >  fi
> >
> > -$UMOUNT_PROG $dev2
> > +_unmount $dev2
> >  _scratch_dev_pool_put
> >  _btrfs_rescan_devices
> >  _test_mount
> > diff --git a/tests/btrfs/185 b/tests/btrfs/185
> > index 8d0643450..f52608852 100755
> > --- a/tests/btrfs/185
> > +++ b/tests/btrfs/185
> > @@ -15,7 +15,7 @@ mnt=$TEST_DIR/$seq.mnt
> >  # Override the default cleanup function.
> >  _cleanup()
> >  {
> > -       $UMOUNT_PROG $mnt > /dev/null 2>&1
> > +       _unmount $mnt > /dev/null 2>&1
> >         rm -rf $mnt > /dev/null 2>&1
> >         cd /
> >         rm -f $tmp.*
> > @@ -62,7 +62,7 @@ $BTRFS_UTIL_PROG device scan $device_1 >> $seqres.full 2>&1
> >         _fail "if it fails here, then it means subvolume mount at boot may fail "\
> >               "in some configs."
> >
> > -$UMOUNT_PROG $mnt > /dev/null 2>&1
> > +_unmount $mnt > /dev/null 2>&1
> >  _scratch_dev_pool_put
> >
> >  # success, all done
> > diff --git a/tests/btrfs/197 b/tests/btrfs/197
> > index 9f1d879a4..111589913 100755
> > --- a/tests/btrfs/197
> > +++ b/tests/btrfs/197
> > @@ -15,7 +15,7 @@ _begin_fstest auto quick volume
> >  # Override the default cleanup function.
> >  _cleanup()
> >  {
> > -       $UMOUNT_PROG $TEST_DIR/$seq.mnt >/dev/null 2>&1
> > +       _unmount $TEST_DIR/$seq.mnt >/dev/null 2>&1
> >         rm -rf $TEST_DIR/$seq.mnt
> >         cd /
> >         rm -f $tmp.*
> > @@ -67,7 +67,7 @@ workout()
> >         grep -q "${SCRATCH_DEV_NAME[1]}" $tmp.output && _fail "found stale device"
> >
> >         $BTRFS_UTIL_PROG device remove "${SCRATCH_DEV_NAME[1]}" "$TEST_DIR/$seq.mnt"
> > -       $UMOUNT_PROG $TEST_DIR/$seq.mnt
> > +       _unmount $TEST_DIR/$seq.mnt
> >         _scratch_unmount
> >         _spare_dev_put
> >         _scratch_dev_pool_put
> > diff --git a/tests/btrfs/219 b/tests/btrfs/219
> > index 052f61a39..58384957e 100755
> > --- a/tests/btrfs/219
> > +++ b/tests/btrfs/219
> > @@ -21,8 +21,8 @@ _cleanup()
> >         rm -f $tmp.*
> >
> >         # The variables are set before the test case can fail.
> > -       $UMOUNT_PROG ${loop_mnt1} &> /dev/null
> > -       $UMOUNT_PROG ${loop_mnt2} &> /dev/null
> > +       _unmount ${loop_mnt1} &> /dev/null
> > +       _unmount ${loop_mnt2} &> /dev/null
> >         rm -rf $loop_mnt1
> >         rm -rf $loop_mnt2
> >
> > @@ -66,7 +66,7 @@ loop_dev2=`_create_loop_device $fs_img2`
> >  # Normal single device case, should pass just fine
> >  _mount $loop_dev1 $loop_mnt1 > /dev/null  2>&1 || \
> >         _fail "Couldn't do initial mount"
> > -$UMOUNT_PROG $loop_mnt1
> > +_unmount $loop_mnt1
> >
> >  _btrfs_forget_or_module_reload
> >
> > @@ -75,15 +75,15 @@ _btrfs_forget_or_module_reload
> >  # measure.
> >  _mount $loop_dev1 $loop_mnt1 > /dev/null 2>&1 || \
> >         _fail "Failed to mount the second time"
> > -$UMOUNT_PROG $loop_mnt1
> > +_unmount $loop_mnt1
> >
> >  _mount $loop_dev2 $loop_mnt2 > /dev/null 2>&1 || \
> >         _fail "We couldn't mount the old generation"
> > -$UMOUNT_PROG $loop_mnt2
> > +_unmount $loop_mnt2
> >
> >  _mount $loop_dev1 $loop_mnt1 > /dev/null 2>&1 || \
> >         _fail "Failed to mount the second time"
> > -$UMOUNT_PROG $loop_mnt1
> > +_unmount $loop_mnt1
> >
> >  # Now try mount them at the same time, if kernel does not support
> >  # temp-fsid feature then mount will fail.
> > diff --git a/tests/btrfs/254 b/tests/btrfs/254
> > index d9c9eea9c..548224894 100755
> > --- a/tests/btrfs/254
> > +++ b/tests/btrfs/254
> > @@ -96,7 +96,7 @@ test_add_device()
> >         $BTRFS_UTIL_PROG filesystem show -m $SCRATCH_MNT | \
> >                                         _filter_btrfs_filesystem_show
> >
> > -       $UMOUNT_PROG $seq_mnt
> > +       _unmount $seq_mnt
> >         _scratch_unmount
> >         cleanup_dmdev
> >  }
> > diff --git a/tests/btrfs/311 b/tests/btrfs/311
> > index 51147c59f..3161e62db 100755
> > --- a/tests/btrfs/311
> > +++ b/tests/btrfs/311
> > @@ -14,7 +14,7 @@ _begin_fstest auto quick subvol tempfsid
> >  _cleanup()
> >  {
> >         cd /
> > -       $UMOUNT_PROG $mnt1 > /dev/null 2>&1
> > +       _unmount $mnt1 > /dev/null 2>&1
> >         rm -r -f $tmp.*
> >         rm -r -f $mnt1
> >  }
> > diff --git a/tests/btrfs/313 b/tests/btrfs/313
> > index 5a9e98dea..bf62af7b2 100755
> > --- a/tests/btrfs/313
> > +++ b/tests/btrfs/313
> > @@ -12,7 +12,7 @@ _begin_fstest auto quick clone tempfsid
> >  _cleanup()
> >  {
> >         cd /
> > -       $UMOUNT_PROG $mnt1 > /dev/null 2>&1
> > +       _unmount $mnt1 > /dev/null 2>&1
> >         rm -r -f $tmp.*
> >         rm -r -f $mnt1
> >  }
> > diff --git a/tests/btrfs/314 b/tests/btrfs/314
> > index 76dccc41f..f3e5c504b 100755
> > --- a/tests/btrfs/314
> > +++ b/tests/btrfs/314
> > @@ -13,7 +13,7 @@ _begin_fstest auto quick snapshot send tempfsid
> >  _cleanup()
> >  {
> >         cd /
> > -       $UMOUNT_PROG $tempfsid_mnt 2>/dev/null
> > +       _unmount $tempfsid_mnt 2>/dev/null
> >         rm -r -f $tmp.*
> >         rm -r -f $sendfile
> >         rm -r -f $tempfsid_mnt
> > diff --git a/tests/btrfs/315 b/tests/btrfs/315
> > index e6589abec..0ea2e8b35 100755
> > --- a/tests/btrfs/315
> > +++ b/tests/btrfs/315
> > @@ -13,7 +13,7 @@ _begin_fstest auto quick volume seed balance tempfsid
> >  _cleanup()
> >  {
> >         cd /
> > -       $UMOUNT_PROG $tempfsid_mnt 2>/dev/null
> > +       _unmount $tempfsid_mnt 2>/dev/null
> >         rm -r -f $tmp.*
> >         rm -r -f $tempfsid_mnt
> >  }
> > diff --git a/tests/btrfs/318 b/tests/btrfs/318
> > index df5a4a072..ad3040d64 100755
> > --- a/tests/btrfs/318
> > +++ b/tests/btrfs/318
> > @@ -22,8 +22,8 @@ _require_loop
> >
> >  _cleanup() {
> >         cd /
> > -       $UMOUNT_PROG $MNT
> > -       $UMOUNT_PROG $BIND
> > +       _unmount $MNT
> > +       _unmount $BIND
> >         losetup -d $DEV0 $DEV1 $DEV2
> >         rm -f $IMG0 $IMG1 $IMG2
> >         rm -rf $MNT $BIND
> > @@ -58,7 +58,7 @@ $MKFS_BTRFS_PROG -f -msingle -dsingle $D0P1 $DEV2 >>$seqres.full 2>&1 || _fail "
> >  rm -rf $MNT
> >  mkdir -p $MNT
> >  _mount $D0P1 $MNT
> > -$UMOUNT_PROG $MNT
> > +_unmount $MNT
> >
> >  # Swap the partition dev_ts. This leaves the dev_t in the cache out of date.
> >  $PARTED_PROG $DEV0 'rm 1' --script
> > diff --git a/tests/btrfs/326 b/tests/btrfs/326
> > index 1fc4db06b..51f769f9a 100755
> > --- a/tests/btrfs/326
> > +++ b/tests/btrfs/326
> > @@ -25,8 +25,8 @@ _cleanup()
> >         [ -n "$mount_pid" ] && kill $mount_pid &> /dev/null
> >         [ -n "$remount_pid" ] && kill $remount_pid &> /dev/null
> >         wait
> > -       $UMOUNT_PROG "$subv1_mount" &> /dev/null
> > -       $UMOUNT_PROG "$subv2_mount" &> /dev/null
> > +       _unmount "$subv1_mount" &> /dev/null
> > +       _unmount "$subv2_mount" &> /dev/null
> >         rm -rf -- "$subv1_mount" "$subv2_mount"
> >  }
> >
> > @@ -80,7 +80,7 @@ mount_workload()
> >         trap "wait; exit" SIGTERM
> >         while true; do
> >                 _mount "$SCRATCH_DEV" "$subv2_mount"
> > -               $UMOUNT_PROG "$subv2_mount"
> > +               _unmount "$subv2_mount"
> >         done
> >  }
> >
> > @@ -94,12 +94,12 @@ wait
> >  unset remount_pid mount_pid
> >
> >  # Subv1 is always mounted, thus the umount should never fail.
> > -$UMOUNT_PROG "$subv1_mount"
> > +_unmount "$subv1_mount"
> >
> >  # Subv2 may have already been unmounted, so here we ignore all output.
> >  # This may hide some errors like -EBUSY, but the next rm line would
> >  # detect any still mounted subvolume so we're still safe.
> > -$UMOUNT_PROG "$subv2_mount" &> /dev/null
> > +_unmount "$subv2_mount" &> /dev/null
> >
> >  # If above unmount, especially subv2 is not properly unmounted,
> >  # the rm should fail with some error message
> > diff --git a/tests/btrfs/330 b/tests/btrfs/330
> > index 92cc498f2..07de58698 100755
> > --- a/tests/btrfs/330
> > +++ b/tests/btrfs/330
> > @@ -48,7 +48,7 @@ echo "making sure bar allows writes"
> >  touch $TEST_DIR/$seq/bar/qux
> >  ls $TEST_DIR/$seq/bar
> >
> > -$UMOUNT_PROG $TEST_DIR/$seq/foo
> > -$UMOUNT_PROG $TEST_DIR/$seq/bar
> > +_unmount $TEST_DIR/$seq/foo
> > +_unmount $TEST_DIR/$seq/bar
> >
> >  status=0 ; exit
> > diff --git a/tests/ext4/032 b/tests/ext4/032
> > index 690fcf066..e6f8c22ba 100755
> > --- a/tests/ext4/032
> > +++ b/tests/ext4/032
> > @@ -63,7 +63,7 @@ ext4_online_resize()
> >         fi
> >         cat $tmp.resize2fs >> $seqres.full
> >         echo "+++ umount fs" | tee -a $seqres.full
> > -       $UMOUNT_PROG ${IMG_MNT}
> > +       _unmount ${IMG_MNT}
> >
> >         echo "+++ check fs" | tee -a $seqres.full
> >         _check_generic_filesystem $LOOP_DEVICE >> $seqres.full 2>&1 || \
> > @@ -77,7 +77,7 @@ _cleanup()
> >         cd /
> >         [ -n "$LOOP_DEVICE" ] && _destroy_loop_device $LOOP_DEVICE > /dev/null 2>&1
> >         rm -f $tmp.*
> > -       $UMOUNT_PROG ${IMG_MNT} > /dev/null 2>&1
> > +       _unmount ${IMG_MNT} > /dev/null 2>&1
> >         rm -f ${IMG_FILE} > /dev/null 2>&1
> >  }
> >
> > diff --git a/tests/ext4/052 b/tests/ext4/052
> > index 0df8a6513..4c02f75cb 100755
> > --- a/tests/ext4/052
> > +++ b/tests/ext4/052
> > @@ -18,7 +18,7 @@ _cleanup()
> >         cd /
> >         rm -r -f $tmp.*
> >         if [ ! -z "$loop_mnt" ]; then
> > -               $UMOUNT_PROG $loop_mnt
> > +               _unmount $loop_mnt
> >                 rm -rf $loop_mnt
> >         fi
> >         [ ! -z "$fs_img" ] && rm -rf $fs_img
> > @@ -64,7 +64,7 @@ then
> >      status=1
> >  fi
> >
> > -$UMOUNT_PROG $loop_mnt || _fail "umount failed"
> > +_unmount $loop_mnt || _fail "umount failed"
> >  loop_mnt=
> >
> >  $E2FSCK_PROG -fn $fs_img >> $seqres.full 2>&1 || _fail "file system corrupted"
> > diff --git a/tests/ext4/053 b/tests/ext4/053
> > index 5922ed571..3e2cda099 100755
> > --- a/tests/ext4/053
> > +++ b/tests/ext4/053
> > @@ -20,7 +20,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> >  _cleanup()
> >  {
> >         cd /
> > -       $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> > +       _unmount $SCRATCH_MNT > /dev/null 2>&1
> >         if [ -n "$LOOP_LOGDEV" ];then
> >                 _destroy_loop_device $LOOP_LOGDEV 2>/dev/null
> >         fi
> > @@ -236,7 +236,7 @@ not_mnt() {
> >         if simple_mount -o $1 $SCRATCH_DEV $SCRATCH_MNT; then
> >                 print_log "(mount unexpectedly succeeded)"
> >                 fail
> > -               $UMOUNT_PROG $SCRATCH_MNT
> > +               _unmount $SCRATCH_MNT
> >                 return
> >         fi
> >         ok
> > @@ -247,7 +247,7 @@ not_mnt() {
> >                 return
> >         fi
> >         not_remount $1
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  mnt_only() {
> > @@ -269,7 +269,7 @@ mnt() {
> >         fi
> >
> >         mnt_only $*
> > -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +       _unmount $SCRATCH_MNT 2> /dev/null
> >
> >         [ "$t2fs" -eq 0 ] && return
> >
> > @@ -288,7 +288,7 @@ mnt() {
> >                                     -e 's/data=writeback/journal_data_writeback/')
> >         $TUNE2FS_PROG -o $op_set $SCRATCH_DEV > /dev/null 2>&1
> >         mnt_only "defaults" $check
> > -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +       _unmount $SCRATCH_MNT 2> /dev/null
> >         if [ "$op_set" = ^* ]; then
> >                 op_set=${op_set#^}
> >         else
> > @@ -308,12 +308,12 @@ remount() {
> >         do_mnt remount,$2 $3
> >         if [ $? -ne 0 ]; then
> >                 fail
> > -               $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +               _unmount $SCRATCH_MNT 2> /dev/null
> >                 return
> >         else
> >                 ok
> >         fi
> > -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +       _unmount $SCRATCH_MNT 2> /dev/null
> >
> >         # Now just specify mnt
> >         print_log "mounting $fstype \"$1\" "
> > @@ -327,7 +327,7 @@ remount() {
> >                 ok
> >         fi
> >
> > -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +       _unmount $SCRATCH_MNT 2> /dev/null
> >  }
> >
> >  # Test that the filesystem cannot be remounted with option(s) $1 (meaning that
> > @@ -363,7 +363,7 @@ mnt_then_not_remount() {
> >                 return
> >         fi
> >         not_remount $2
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >
> > @@ -399,8 +399,8 @@ LOGDEV_DEVNUM=`echo "${majmin%:*}*2^8 + ${majmin#*:}" | bc`
> >  fstype=
> >  for fstype in ext2 ext3 ext4; do
> >
> > -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > -       $UMOUNT_PROG $SCRATCH_DEV 2> /dev/null
> > +       _unmount $SCRATCH_MNT 2> /dev/null
> > +       _unmount $SCRATCH_DEV 2> /dev/null
> >
> >         do_mkfs $SCRATCH_DEV ${SIZE}k
> >
> > @@ -417,7 +417,7 @@ for fstype in ext2 ext3 ext4; do
> >                 continue
> >         fi
> >
> > -       $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +       _unmount $SCRATCH_MNT 2> /dev/null
> >
> >         not_mnt failme
> >         mnt
> > @@ -551,7 +551,7 @@ for fstype in ext2 ext3 ext4; do
> >         # dax mount options
> >         simple_mount -o dax=always $SCRATCH_DEV $SCRATCH_MNT > /dev/null 2>&1
> >         if [ $? -eq 0 ]; then
> > -               $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +               _unmount $SCRATCH_MNT 2> /dev/null
> >                 mnt dax
> >                 mnt dax=always
> >                 mnt dax=never
> > @@ -632,7 +632,7 @@ for fstype in ext2 ext3 ext4; do
> >         not_remount jqfmt=vfsv1
> >         not_remount noquota
> >         mnt_only remount,usrquota,grpquota ^usrquota,^grpquota
> > -       $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> > +       _unmount $SCRATCH_MNT > /dev/null 2>&1
> >
> >         # test clearing/changing quota when enabled
> >         do_mkfs -E quotatype=^prjquota $SCRATCH_DEV ${SIZE}k
> > @@ -653,7 +653,7 @@ for fstype in ext2 ext3 ext4; do
> >         mnt_only remount,usrquota,grpquota usrquota,grpquota
> >         quotaoff -f $SCRATCH_MNT >> $seqres.full 2>&1
> >         mnt_only remount,noquota ^usrquota,^grpquota,quota
> > -       $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> > +       _unmount $SCRATCH_MNT > /dev/null 2>&1
> >
> >         # Quota feature
> >         echo "== Testing quota feature " >> $seqres.full
> > @@ -695,7 +695,7 @@ for fstype in ext2 ext3 ext4; do
> >
> >  done #for fstype in ext2 ext3 ext4; do
> >
> > -$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> > +_unmount $SCRATCH_MNT > /dev/null 2>&1
> >  echo "$ERR errors encountered" >> $seqres.full
> >
> >  status=$ERR
> > diff --git a/tests/ext4/056 b/tests/ext4/056
> > index fb5bbe93e..d22aebfa6 100755
> > --- a/tests/ext4/056
> > +++ b/tests/ext4/056
> > @@ -72,7 +72,7 @@ do_resize()
> >         # delay
> >         sleep 0.2
> >         _scratch_unmount >> $seqres.full 2>&1 \
> > -               || _fail "$UMOUNT_PROG failed. Exiting"
> > +               || _fail "_unmount failed. Exiting"
> >  }
> >
> >  run_test()
> > diff --git a/tests/overlay/003 b/tests/overlay/003
> > index 41ad99e79..0b5660b8e 100755
> > --- a/tests/overlay/003
> > +++ b/tests/overlay/003
> > @@ -56,7 +56,7 @@ rm -rf ${SCRATCH_MNT}/*
> >  ls ${SCRATCH_MNT}/
> >
> >  # unmount overlayfs but not base fs
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  echo "Silence is golden"
> >  # success, all done
> > diff --git a/tests/overlay/004 b/tests/overlay/004
> > index bea4bb543..e97e9ddd9 100755
> > --- a/tests/overlay/004
> > +++ b/tests/overlay/004
> > @@ -53,7 +53,7 @@ _user_do "chmod u-X ${SCRATCH_MNT}/attr_file2 > /dev/null 2>&1"
> >  stat -c %a ${SCRATCH_MNT}/attr_file2
> >
> >  # unmount overlayfs but not base fs
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # check mode bits of the file that has been copied up, and
> >  # the file that should not have been copied up.
> > diff --git a/tests/overlay/005 b/tests/overlay/005
> > index 4c11d5e1b..1495999b7 100755
> > --- a/tests/overlay/005
> > +++ b/tests/overlay/005
> > @@ -75,14 +75,14 @@ $XFS_IO_PROG -f -c "o" ${SCRATCH_MNT}/test_file \
> >         >>$seqres.full 2>&1
> >
> >  # unmount overlayfs
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # check overlayfs
> >  _overlay_check_scratch_dirs $lowerd $upperd $workd
> >
> >  # unmount undelying xfs, this tiggers panic if memleak happens
> > -$UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/uppermnt
> > -$UMOUNT_PROG ${OVL_BASE_SCRATCH_MNT}/lowermnt
> > +_unmount ${OVL_BASE_SCRATCH_MNT}/uppermnt
> > +_unmount ${OVL_BASE_SCRATCH_MNT}/lowermnt
> >
> >  # success, all done
> >  echo "Silence is golden"
> > diff --git a/tests/overlay/014 b/tests/overlay/014
> > index f07fc6855..aeb1467a7 100755
> > --- a/tests/overlay/014
> > +++ b/tests/overlay/014
> > @@ -46,7 +46,7 @@ _overlay_scratch_mount_dirs $lowerdir1 $lowerdir2 $workdir2
> >  rm -rf $SCRATCH_MNT/testdir
> >  mkdir -p $SCRATCH_MNT/testdir/visibledir
> >  # unmount overlayfs but not base fs
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # check overlayfs
> >  _overlay_check_scratch_dirs $lowerdir1 $lowerdir2 $workdir2
> > @@ -59,7 +59,7 @@ touch $SCRATCH_MNT/testdir/visiblefile
> >
> >  # umount and mount overlay again, buggy kernel treats the copied-up dir as
> >  # opaque, visibledir is not seen in merged dir.
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >  _overlay_scratch_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir
> >  ls $SCRATCH_MNT/testdir
> >
> > diff --git a/tests/overlay/022 b/tests/overlay/022
> > index d33bd2978..8b26a2cd0 100755
> > --- a/tests/overlay/022
> > +++ b/tests/overlay/022
> > @@ -17,7 +17,7 @@ _begin_fstest auto quick mount nested
> >  _cleanup()
> >  {
> >         cd /
> > -       $UMOUNT_PROG $tmp/mnt > /dev/null 2>&1
> > +       _unmount $tmp/mnt > /dev/null 2>&1
> >         rm -rf $tmp
> >         rm -f $tmp.*
> >  }
> > diff --git a/tests/overlay/025 b/tests/overlay/025
> > index dc819a393..3b6cf987b 100755
> > --- a/tests/overlay/025
> > +++ b/tests/overlay/025
> > @@ -19,8 +19,8 @@ _begin_fstest auto quick attr
> >  _cleanup()
> >  {
> >         cd /
> > -       $UMOUNT_PROG $tmpfsdir/mnt
> > -       $UMOUNT_PROG $tmpfsdir
> > +       _unmount $tmpfsdir/mnt
> > +       _unmount $tmpfsdir
> >         rm -rf $tmpfsdir
> >         rm -f $tmp.*
> >  }
> > diff --git a/tests/overlay/029 b/tests/overlay/029
> > index 4bade9a0e..b0ed7285f 100755
> > --- a/tests/overlay/029
> > +++ b/tests/overlay/029
> > @@ -22,7 +22,7 @@ _begin_fstest auto quick nested
> >  _cleanup()
> >  {
> >         cd /
> > -       $UMOUNT_PROG $tmp/mnt
> > +       _unmount $tmp/mnt
> >         rm -rf $tmp
> >         rm -f $tmp.*
> >  }
> > @@ -56,7 +56,7 @@ _overlay_mount_dirs $SCRATCH_MNT/up $tmp/{upper,work} \
> >    overlay $tmp/mnt
> >  # accessing file in the second mount
> >  cat $tmp/mnt/foo
> > -$UMOUNT_PROG $tmp/mnt
> > +_unmount $tmp/mnt
> >
> >  # re-create upper/work to avoid ovl_verify_origin() mount failure
> >  # when index is enabled
> > @@ -66,7 +66,7 @@ mkdir -p $tmp/{upper,work}
> >  _overlay_mount_dirs $SCRATCH_MNT/low $tmp/{upper,work} \
> >    overlay $tmp/mnt
> >  cat $tmp/mnt/bar
> > -$UMOUNT_PROG $tmp/mnt
> > +_unmount $tmp/mnt
> >
> >  rm -rf $tmp/{upper,work}
> >  mkdir -p $tmp/{upper,work}
> > diff --git a/tests/overlay/031 b/tests/overlay/031
> > index dd9dfcdb9..88299ebe2 100755
> > --- a/tests/overlay/031
> > +++ b/tests/overlay/031
> > @@ -28,7 +28,7 @@ create_whiteout()
> >
> >         rm -f $SCRATCH_MNT/testdir/$file
> >
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  # Import common functions.
> > @@ -68,7 +68,7 @@ rm -rf $SCRATCH_MNT/testdir 2>&1 | _filter_scratch
> >
> >  # umount overlay again, create a new file with the same name and
> >  # mount overlay again.
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >  touch $lowerdir1/testdir
> >
> >  _overlay_scratch_mount_dirs $lowerdir1 $upperdir $workdir
> > @@ -77,7 +77,7 @@ _overlay_scratch_mount_dirs $lowerdir1 $upperdir $workdir
> >  # it will not clean up the dir and lead to residue.
> >  rm -rf $SCRATCH_MNT/testdir 2>&1 | _filter_scratch
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # let lower dir have invalid whiteouts, repeat ls and rmdir test again.
> >  rm -rf $lowerdir1/testdir
> > @@ -92,7 +92,7 @@ _overlay_scratch_mount_dirs "$lowerdir1:$lowerdir2" $upperdir $workdir
> >  ls $SCRATCH_MNT/testdir
> >  rm -rf $SCRATCH_MNT/testdir 2>&1 | _filter_scratch
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # let lower dir and upper dir both have invalid whiteouts, repeat ls and rmdir again.
> >  rm -rf $lowerdir1/testdir
> > diff --git a/tests/overlay/035 b/tests/overlay/035
> > index 0b3257c4c..14e62ca2e 100755
> > --- a/tests/overlay/035
> > +++ b/tests/overlay/035
> > @@ -43,7 +43,7 @@ mkdir -p $lowerdir1 $lowerdir2 $upperdir $workdir
> >  _overlay_scratch_mount_opts -o"lowerdir=$lowerdir2:$lowerdir1"
> >  touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
> >  $MOUNT_PROG -o remount,rw $SCRATCH_MNT 2>&1 | _filter_ro_mount
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # Make workdir immutable to prevent workdir re-create on mount
> >  $CHATTR_PROG +i $workdir
> > diff --git a/tests/overlay/036 b/tests/overlay/036
> > index 19a181bbd..d94a86c49 100755
> > --- a/tests/overlay/036
> > +++ b/tests/overlay/036
> > @@ -34,8 +34,8 @@ _cleanup()
> >         cd /
> >         rm -f $tmp.*
> >         # unmount the two extra mounts in case they did not fail
> > -       $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > -       $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +       _unmount $SCRATCH_MNT 2>/dev/null
> > +       _unmount $SCRATCH_MNT 2>/dev/null
> >  }
> >
> >  # Import common functions.
> > @@ -66,13 +66,13 @@ _overlay_mount_dirs $lowerdir $upperdir $workdir \
> >  # with index=off - expect success
> >  _overlay_mount_dirs $lowerdir $upperdir $workdir2 \
> >                     overlay0 $SCRATCH_MNT -oindex=off && \
> > -                   $UMOUNT_PROG $SCRATCH_MNT
> > +                   _unmount $SCRATCH_MNT
> >
> >  # Try to mount another overlay with the same workdir
> >  # with index=off - expect success
> >  _overlay_mount_dirs $lowerdir2 $upperdir2 $workdir \
> >                     overlay1 $SCRATCH_MNT -oindex=off && \
> > -                   $UMOUNT_PROG $SCRATCH_MNT
> > +                   _unmount $SCRATCH_MNT
> >
> >  # Try to mount another overlay with the same upperdir
> >  # with index=on - expect EBUSY
> > diff --git a/tests/overlay/037 b/tests/overlay/037
> > index 834e17638..70aecb065 100755
> > --- a/tests/overlay/037
> > +++ b/tests/overlay/037
> > @@ -39,17 +39,17 @@ mkdir -p $lowerdir $lowerdir2 $upperdir $upperdir2 $workdir
> >  # Mount overlay with lowerdir, upperdir, workdir and index=on
> >  # to store the file handles of lowerdir and upperdir in overlay.origin xattr
> >  _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -oindex=on
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # Try to mount an overlay with the same upperdir and different lowerdir - expect ESTALE
> >  _overlay_scratch_mount_dirs $lowerdir2 $upperdir $workdir -oindex=on \
> >         2>&1 | _filter_error_mount
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  # Try to mount an overlay with the same workdir and different upperdir - expect ESTALE
> >  _overlay_scratch_mount_dirs $lowerdir $upperdir2 $workdir -oindex=on \
> >         2>&1 | _filter_error_mount
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  # Mount overlay with original lowerdir, upperdir, workdir and index=on - expect success
> >  _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -oindex=on
> > diff --git a/tests/overlay/040 b/tests/overlay/040
> > index 11c7bf129..aeb4cdc93 100755
> > --- a/tests/overlay/040
> > +++ b/tests/overlay/040
> > @@ -48,7 +48,7 @@ _scratch_mount
> >  # modify lower origin file.
> >  $CHATTR_PROG +i $SCRATCH_MNT/foo > /dev/null 2>&1
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # touching origin file in lower, should succeed
> >  touch $lowerdir/foo
> > diff --git a/tests/overlay/041 b/tests/overlay/041
> > index 36491b8fa..3517d3652 100755
> > --- a/tests/overlay/041
> > +++ b/tests/overlay/041
> > @@ -142,7 +142,7 @@ subdir_d=$($here/src/t_dir_type $pure_lower_dir $pure_lower_subdir_st_ino)
> >  [[ $subdir_d == "subdir d" ]] || \
> >         echo "Merged dir: Invalid d_ino reported for subdir"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # check overlayfs
> >  _overlay_check_scratch_dirs $lowerdir $upperdir $workdir -o xino=on
> > diff --git a/tests/overlay/042 b/tests/overlay/042
> > index aaa10da33..538b87ef9 100755
> > --- a/tests/overlay/042
> > +++ b/tests/overlay/042
> > @@ -45,7 +45,7 @@ _scratch_mount -o index=off
> >  # Copy up lower and create upper hardlink with no index
> >  ln $SCRATCH_MNT/0 $SCRATCH_MNT/1
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # Add lower hardlinks while overlay is offline
> >  ln $lowerdir/0 $lowerdir/2
> > diff --git a/tests/overlay/043 b/tests/overlay/043
> > index 7325c653a..1683738d7 100755
> > --- a/tests/overlay/043
> > +++ b/tests/overlay/043
> > @@ -126,7 +126,7 @@ echo 3 > /proc/sys/vm/drop_caches
> >  check_inode_numbers $testdir $tmp.after_copyup $tmp.after_move
> >
> >  # Verify that the inode numbers survive a mount cycle
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >  _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -o redirect_dir=on,xino=on
> >
> >  # Compare inode numbers before/after mount cycle
> > diff --git a/tests/overlay/044 b/tests/overlay/044
> > index 4d04d883e..e19613c1c 100755
> > --- a/tests/overlay/044
> > +++ b/tests/overlay/044
> > @@ -99,7 +99,7 @@ cat $FILES
> >  check_ino_nlink $SCRATCH_MNT $tmp.before $tmp.after_one
> >
> >  # Verify that the hardlinks survive a mount cycle
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >  _overlay_check_scratch_dirs $lowerdir $upperdir $workdir -o index=on,xino=on
> >  _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir -o index=on,xino=on
> >
> > diff --git a/tests/overlay/048 b/tests/overlay/048
> > index 897e797e2..3de1fa795 100755
> > --- a/tests/overlay/048
> > +++ b/tests/overlay/048
> > @@ -32,7 +32,7 @@ report_nlink()
> >                 _ls_l $SCRATCH_MNT/$f | awk '{ print $2, $9 }' | _filter_scratch
> >         done
> >
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  # Create lower hardlinks
> > @@ -101,7 +101,7 @@ touch $SCRATCH_MNT/1
> >  touch $SCRATCH_MNT/2
> >
> >  # Perform the rest of the changes offline
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  test_hardlinks_offline
> >
> > diff --git a/tests/overlay/049 b/tests/overlay/049
> > index 3ee500c5d..c7f93cb93 100755
> > --- a/tests/overlay/049
> > +++ b/tests/overlay/049
> > @@ -32,7 +32,7 @@ create_redirect()
> >         touch $SCRATCH_MNT/origin/file
> >         mv $SCRATCH_MNT/origin $SCRATCH_MNT/$redirect
> >
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  # Import common functions.
> > diff --git a/tests/overlay/050 b/tests/overlay/050
> > index ec936e2a7..bff002286 100755
> > --- a/tests/overlay/050
> > +++ b/tests/overlay/050
> > @@ -76,7 +76,7 @@ mount_dirs()
> >  # Unmount the overlay without unmounting base fs
> >  unmount_dirs()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  # Check non-stale file handles of lower/upper files and verify
> > diff --git a/tests/overlay/051 b/tests/overlay/051
> > index 9404dbbab..d99d19678 100755
> > --- a/tests/overlay/051
> > +++ b/tests/overlay/051
> > @@ -28,7 +28,7 @@ _cleanup()
> >         # Cleanup overlay scratch mount that is holding base test mount
> >         # to prevent _check_test_fs and _test_umount from failing before
> >         # _check_scratch_fs _scratch_umount
> > -       $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +       _unmount $SCRATCH_MNT 2>/dev/null
> >  }
> >
> >  # Import common functions.
> > @@ -103,7 +103,7 @@ mount_dirs()
> >  # underlying dirs
> >  unmount_dirs()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >
> >         _overlay_check_scratch_dirs $middle:$lower $upper $work \
> >                                 -o "index=on,nfs_export=on"
> > diff --git a/tests/overlay/052 b/tests/overlay/052
> > index 37402067d..9b53cd78a 100755
> > --- a/tests/overlay/052
> > +++ b/tests/overlay/052
> > @@ -73,7 +73,7 @@ mount_dirs()
> >  # Unmount the overlay without unmounting base fs
> >  unmount_dirs()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  # Check non-stale file handles of lower/upper moved files
> > diff --git a/tests/overlay/053 b/tests/overlay/053
> > index f7891aced..13a4873ee 100755
> > --- a/tests/overlay/053
> > +++ b/tests/overlay/053
> > @@ -30,7 +30,7 @@ _cleanup()
> >         # Cleanup overlay scratch mount that is holding base test mount
> >         # to prevent _check_test_fs and _test_umount from failing before
> >         # _check_scratch_fs _scratch_umount
> > -       $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +       _unmount $SCRATCH_MNT 2>/dev/null
> >  }
> >
> >  # Import common functions.
> > @@ -99,7 +99,7 @@ mount_dirs()
> >  # underlying dirs
> >  unmount_dirs()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >
> >         _overlay_check_scratch_dirs $middle:$lower $upper $work \
> >                                 -o "index=on,nfs_export=on,redirect_dir=on"
> > diff --git a/tests/overlay/054 b/tests/overlay/054
> > index 8d7f026a2..260c95d50 100755
> > --- a/tests/overlay/054
> > +++ b/tests/overlay/054
> > @@ -87,7 +87,7 @@ mount_dirs()
> >  # Unmount the overlay without unmounting base fs
> >  unmount_dirs()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  # Check encode/decode/read file handles of dir with non-indexed ancestor
> > diff --git a/tests/overlay/055 b/tests/overlay/055
> > index 87a348c94..84ce631f0 100755
> > --- a/tests/overlay/055
> > +++ b/tests/overlay/055
> > @@ -37,7 +37,7 @@ _cleanup()
> >         # Cleanup overlay scratch mount that is holding base test mount
> >         # to prevent _check_test_fs and _test_umount from failing before
> >         # _check_scratch_fs _scratch_umount
> > -       $UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +       _unmount $SCRATCH_MNT 2>/dev/null
> >  }
> >
> >  # Import common functions.
> > @@ -109,7 +109,7 @@ mount_dirs()
> >  # underlying dirs
> >  unmount_dirs()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >
> >         _overlay_check_scratch_dirs $middle:$lower $upper $work \
> >                                 -o "index=on,nfs_export=on,redirect_dir=on"
> > diff --git a/tests/overlay/056 b/tests/overlay/056
> > index 158f34d05..72da81fe0 100755
> > --- a/tests/overlay/056
> > +++ b/tests/overlay/056
> > @@ -73,7 +73,7 @@ mkdir $lowerdir/testdir2/subdir
> >  _overlay_scratch_mount_dirs $lowerdir $upperdir $workdir
> >  touch $SCRATCH_MNT/testdir1/foo
> >  touch $SCRATCH_MNT/testdir2/subdir
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >  remove_impure $upperdir/testdir1
> >  remove_impure $upperdir/testdir2
> >
> > diff --git a/tests/overlay/057 b/tests/overlay/057
> > index da7ffda30..325675d54 100755
> > --- a/tests/overlay/057
> > +++ b/tests/overlay/057
> > @@ -48,7 +48,7 @@ _overlay_scratch_mount_dirs $lowerdir $lowerdir2 $workdir2 -o redirect_dir=on
> >  # Create opaque parent with absolute redirect child in middle layer
> >  mkdir $SCRATCH_MNT/pure
> >  mv $SCRATCH_MNT/origin $SCRATCH_MNT/pure/redirect
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >  _overlay_scratch_mount_dirs $lowerdir2:$lowerdir $upperdir $workdir -o redirect_dir=on
> >  mv $SCRATCH_MNT/pure/redirect $SCRATCH_MNT/redirect
> >  # List content of renamed merge dir before mount cycle
> > @@ -56,7 +56,7 @@ ls $SCRATCH_MNT/redirect/
> >
> >  # Verify that redirects are followed by listing content of renamed merge dir
> >  # after mount cycle
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >  _overlay_scratch_mount_dirs $lowerdir2:$lowerdir $upperdir $workdir -o redirect_dir=on
> >  ls $SCRATCH_MNT/redirect/
> >
> > diff --git a/tests/overlay/059 b/tests/overlay/059
> > index c48d2a82c..9b9263c09 100755
> > --- a/tests/overlay/059
> > +++ b/tests/overlay/059
> > @@ -33,7 +33,7 @@ create_origin_ref()
> >         _scratch_mount -o redirect_dir=on
> >         mv $SCRATCH_MNT/origin $SCRATCH_MNT/$ref
> >
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  # Import common functions.
> > diff --git a/tests/overlay/060 b/tests/overlay/060
> > index bb61fcfa6..05dab179d 100755
> > --- a/tests/overlay/060
> > +++ b/tests/overlay/060
> > @@ -130,7 +130,7 @@ mount_ro_overlay()
> >
> >  umount_overlay()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  # Assumes it is called with overlay mounted.
> > diff --git a/tests/overlay/062 b/tests/overlay/062
> > index e44628b74..4290fbc85 100755
> > --- a/tests/overlay/062
> > +++ b/tests/overlay/062
> > @@ -18,7 +18,7 @@ _cleanup()
> >  {
> >         cd /
> >         rm -f $tmp.*
> > -       $UMOUNT_PROG $lowertestdir
> > +       _unmount $lowertestdir
> >  }
> >
> >  # Import common functions.
> > diff --git a/tests/overlay/063 b/tests/overlay/063
> > index d9f30606a..b0468cd58 100755
> > --- a/tests/overlay/063
> > +++ b/tests/overlay/063
> > @@ -40,7 +40,7 @@ rm ${upperdir}/file
> >  mkdir ${SCRATCH_MNT}/file > /dev/null 2>&1
> >
> >  # unmount overlayfs
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  echo "Silence is golden"
> >  # success, all done
> > diff --git a/tests/overlay/065 b/tests/overlay/065
> > index fb6d6dd1b..08ada3242 100755
> > --- a/tests/overlay/065
> > +++ b/tests/overlay/065
> > @@ -30,7 +30,7 @@ _cleanup()
> >  {
> >         cd /
> >         rm -f $tmp.*
> > -       $UMOUNT_PROG $mnt2 2>/dev/null
> > +       _unmount $mnt2 2>/dev/null
> >  }
> >
> >  # Import common functions.
> > @@ -63,7 +63,7 @@ mkdir -p $lowerdir/lower $upperdir $workdir
> >  echo Conflicting upperdir/lowerdir
> >  _overlay_scratch_mount_dirs $upperdir $upperdir $workdir \
> >         2>&1 | _filter_error_mount
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  # Use new upper/work dirs for each test to avoid ESTALE errors
> >  # on mismatch lowerdir/upperdir (see test overlay/037)
> > @@ -75,7 +75,7 @@ mkdir $upperdir $workdir
> >  echo Conflicting workdir/lowerdir
> >  _overlay_scratch_mount_dirs $workdir $upperdir $workdir \
> >         -oindex=off 2>&1 | _filter_error_mount
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  rm -rf $upperdir $workdir
> >  mkdir -p $upperdir/lower $workdir
> > @@ -85,7 +85,7 @@ mkdir -p $upperdir/lower $workdir
> >  echo Overlapping upperdir/lowerdir
> >  _overlay_scratch_mount_dirs $upperdir/lower $upperdir $workdir \
> >         2>&1 | _filter_error_mount
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  rm -rf $upperdir $workdir
> >  mkdir $upperdir $workdir
> > @@ -94,7 +94,7 @@ mkdir $upperdir $workdir
> >  echo Conflicting lower layers
> >  _overlay_scratch_mount_dirs $lowerdir:$lowerdir $upperdir $workdir \
> >         2>&1 | _filter_error_mount
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  rm -rf $upperdir $workdir
> >  mkdir $upperdir $workdir
> > @@ -103,7 +103,7 @@ mkdir $upperdir $workdir
> >  echo Overlapping lower layers below
> >  _overlay_scratch_mount_dirs $lowerdir:$lowerdir/lower $upperdir $workdir \
> >         2>&1 | _filter_error_mount
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  rm -rf $upperdir $workdir
> >  mkdir $upperdir $workdir
> > @@ -112,7 +112,7 @@ mkdir $upperdir $workdir
> >  echo Overlapping lower layers above
> >  _overlay_scratch_mount_dirs $lowerdir/lower:$lowerdir $upperdir $workdir \
> >         2>&1 | _filter_error_mount
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  rm -rf $upperdir $workdir
> >  mkdir -p $upperdir/upper $workdir $mnt2
> > @@ -129,14 +129,14 @@ mkdir -p $upperdir2 $workdir2 $mnt2
> >  echo "Overlapping with upperdir of another instance (index=on)"
> >  _overlay_scratch_mount_dirs $upperdir/upper $upperdir2 $workdir2 \
> >         -oindex=on 2>&1 | _filter_busy_mount
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  rm -rf $upperdir2 $workdir2
> >  mkdir -p $upperdir2 $workdir2
> >
> >  echo "Overlapping with upperdir of another instance (index=off)"
> >  _overlay_scratch_mount_dirs $upperdir/upper $upperdir2 $workdir2 \
> > -       -oindex=off && $UMOUNT_PROG $SCRATCH_MNT
> > +       -oindex=off && _unmount $SCRATCH_MNT
> >
> >  rm -rf $upperdir2 $workdir2
> >  mkdir -p $upperdir2 $workdir2
> > @@ -146,14 +146,14 @@ mkdir -p $upperdir2 $workdir2
> >  echo "Overlapping with workdir of another instance (index=on)"
> >  _overlay_scratch_mount_dirs $workdir/work $upperdir2 $workdir2 \
> >         -oindex=on 2>&1 | _filter_busy_mount
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  rm -rf $upperdir2 $workdir2
> >  mkdir -p $upperdir2 $workdir2
> >
> >  echo "Overlapping with workdir of another instance (index=off)"
> >  _overlay_scratch_mount_dirs $workdir/work $upperdir2 $workdir2 \
> > -       -oindex=off && $UMOUNT_PROG $SCRATCH_MNT
> > +       -oindex=off && _unmount $SCRATCH_MNT
> >
> >  # Move upper layer root into lower layer after mount
> >  echo Overlapping upperdir/lowerdir after mount
> > diff --git a/tests/overlay/067 b/tests/overlay/067
> > index bb09a6042..4b57675e2 100755
> > --- a/tests/overlay/067
> > +++ b/tests/overlay/067
> > @@ -70,7 +70,7 @@ stat $testfile >>$seqres.full
> >  diff -q $realfile $testfile >>$seqres.full &&
> >         echo "diff with middle layer file doesn't know right from wrong! (cold cache)"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >  # check overlayfs
> >  _overlay_check_scratch_dirs $middle:$lower $upper $work -o xino=off
> >
> > diff --git a/tests/overlay/068 b/tests/overlay/068
> > index 0d33cf12d..66b1b49ca 100755
> > --- a/tests/overlay/068
> > +++ b/tests/overlay/068
> > @@ -28,7 +28,7 @@ _cleanup()
> >         cd /
> >         rm -f $tmp.*
> >         # Unmount the nested overlay mount
> > -       $UMOUNT_PROG $mnt2 2>/dev/null
> > +       _unmount $mnt2 2>/dev/null
> >  }
> >
> >  # Import common functions.
> > @@ -100,7 +100,7 @@ mount_dirs()
> >  unmount_dirs()
> >  {
> >         # unmount & check nested overlay
> > -       $UMOUNT_PROG $mnt2
> > +       _unmount $mnt2
> >         _overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
> >                 -o "index=on,nfs_export=on,redirect_dir=on"
> >
> > diff --git a/tests/overlay/069 b/tests/overlay/069
> > index 373ab1ee3..b145ad8e2 100755
> > --- a/tests/overlay/069
> > +++ b/tests/overlay/069
> > @@ -28,7 +28,7 @@ _cleanup()
> >         cd /
> >         rm -f $tmp.*
> >         # Unmount the nested overlay mount
> > -       $UMOUNT_PROG $mnt2 2>/dev/null
> > +       _unmount $mnt2 2>/dev/null
> >  }
> >
> >  # Import common functions.
> > @@ -108,12 +108,12 @@ mount_dirs()
> >  unmount_dirs()
> >  {
> >         # unmount & check nested overlay
> > -       $UMOUNT_PROG $mnt2
> > +       _unmount $mnt2
> >         _overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
> >                 -o "index=on,nfs_export=on,redirect_dir=on"
> >
> >         # unmount & check underlying overlay
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >         _overlay_check_dirs $lower $upper $work \
> >                 -o "index=on,nfs_export=on,redirect_dir=on"
> >  }
> > diff --git a/tests/overlay/070 b/tests/overlay/070
> > index 36991229f..078dda417 100755
> > --- a/tests/overlay/070
> > +++ b/tests/overlay/070
> > @@ -26,7 +26,7 @@ _cleanup()
> >         cd /
> >         rm -f $tmp.*
> >         # Unmount the nested overlay mount
> > -       $UMOUNT_PROG $mnt2 2>/dev/null
> > +       _unmount $mnt2 2>/dev/null
> >         [ -z "$loopdev" ] || _destroy_loop_device $loopdev
> >  }
> >
> > @@ -93,12 +93,12 @@ mount_dirs()
> >  unmount_dirs()
> >  {
> >         # unmount & check nested overlay
> > -       $UMOUNT_PROG $mnt2
> > +       _unmount $mnt2
> >         _overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
> >                 -o "redirect_dir=on,index=on,xino=on"
> >
> >         # unmount & check underlying overlay
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >         _overlay_check_scratch_dirs $lower $upper $work \
> >                 -o "index=on,nfs_export=on"
> >  }
> > diff --git a/tests/overlay/071 b/tests/overlay/071
> > index 2a6313142..1954d0cb1 100755
> > --- a/tests/overlay/071
> > +++ b/tests/overlay/071
> > @@ -29,7 +29,7 @@ _cleanup()
> >         cd /
> >         rm -f $tmp.*
> >         # Unmount the nested overlay mount
> > -       $UMOUNT_PROG $mnt2 2>/dev/null
> > +       _unmount $mnt2 2>/dev/null
> >         [ -z "$loopdev" ] || _destroy_loop_device $loopdev
> >  }
> >
> > @@ -103,12 +103,12 @@ mount_dirs()
> >  unmount_dirs()
> >  {
> >         # unmount & check nested overlay
> > -       $UMOUNT_PROG $mnt2
> > +       _unmount $mnt2
> >         _overlay_check_dirs $SCRATCH_MNT $upper2 $work2 \
> >                 -o "redirect_dir=on,index=on,xino=on"
> >
> >         # unmount & check underlying overlay
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >         _overlay_check_dirs $lower $upper $work \
> >                 -o "index=on,nfs_export=on"
> >  }
> > diff --git a/tests/overlay/076 b/tests/overlay/076
> > index fb94dff68..a137ac803 100755
> > --- a/tests/overlay/076
> > +++ b/tests/overlay/076
> > @@ -47,7 +47,7 @@ _scratch_mount
> >  # on kernel v5.10..v5.10.14.  Anything but hang is considered a test success.
> >  $CHATTR_PROG +i $SCRATCH_MNT/foo > /dev/null 2>&1
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # success, all done
> >  echo "Silence is golden"
> > diff --git a/tests/overlay/077 b/tests/overlay/077
> > index 00de0825a..a322709e8 100755
> > --- a/tests/overlay/077
> > +++ b/tests/overlay/077
> > @@ -65,7 +65,7 @@ mv $SCRATCH_MNT/f100 $SCRATCH_MNT/former/
> >
> >  # Remove the lower directory and mount overlay again to create
> >  # a "former merge dir"
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >  rm -rf $lowerdir/former
> >  _scratch_mount
> >
> > diff --git a/tests/overlay/078 b/tests/overlay/078
> > index d6df11f68..0ee9e54d9 100755
> > --- a/tests/overlay/078
> > +++ b/tests/overlay/078
> > @@ -61,7 +61,7 @@ do_check()
> >
> >         echo "Test chattr +$1 $2" >> $seqres.full
> >
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >
> >         # Add attribute to lower file
> >         $CHATTR_PROG +$attr $lowertestfile
> > diff --git a/tests/overlay/079 b/tests/overlay/079
> > index cfcafceea..2ea9ba93b 100755
> > --- a/tests/overlay/079
> > +++ b/tests/overlay/079
> > @@ -156,7 +156,7 @@ mount_ro_overlay()
> >
> >  umount_overlay()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  test_no_access()
> > diff --git a/tests/overlay/080 b/tests/overlay/080
> > index ce5c2375f..77fd8dbfe 100755
> > --- a/tests/overlay/080
> > +++ b/tests/overlay/080
> > @@ -264,7 +264,7 @@ mount_overlay()
> >
> >  umount_overlay()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >
> > diff --git a/tests/overlay/081 b/tests/overlay/081
> > index 2270a0475..39eac6466 100755
> > --- a/tests/overlay/081
> > +++ b/tests/overlay/081
> > @@ -46,7 +46,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
> >         echo "Overlayfs (uuid=null) and upper fs fsid differ"
> >
> >  # Keep base fs mounted in case it has a volatile fsid (e.g. tmpfs)
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # Test legacy behavior is preserved by default for existing "impure" overlayfs
> >  _scratch_mount
> > @@ -55,7 +55,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
> >  [[ "$ovl_fsid" == "$upper_fsid" ]] || \
> >         echo "Overlayfs (after uuid=null) and upper fs fsid differ"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # Test unique fsid on explicit opt-in for existing "impure" overlayfs
> >  _scratch_mount -o uuid=on
> > @@ -65,7 +65,7 @@ ovl_unique_fsid=$ovl_fsid
> >  [[ "$ovl_fsid" != "$upper_fsid" ]] || \
> >         echo "Overlayfs (uuid=on) and upper fs fsid are the same"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # Test unique fsid is persistent by default after it was created
> >  _scratch_mount
> > @@ -74,7 +74,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
> >  [[ "$ovl_fsid" == "$ovl_unique_fsid" ]] || \
> >         echo "Overlayfs (after uuid=on) unique fsid is not persistent"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # Test ignore existing persistent fsid on explicit opt-out
> >  _scratch_mount -o uuid=null
> > @@ -83,7 +83,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
> >  [[ "$ovl_fsid" == "$upper_fsid" ]] || \
> >         echo "Overlayfs (uuid=null) and upper fs fsid differ"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # Test fallback to uuid=null with non-upper ovelray
> >  _overlay_scratch_mount_dirs "$upperdir:$lowerdir" "-" "-" -o ro,uuid=on
> > @@ -110,7 +110,7 @@ ovl_unique_fsid=$ovl_fsid
> >  [[ "$ovl_fsid" != "$upper_fsid" ]] || \
> >         echo "Overlayfs (new) and upper fs fsid are the same"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  # Test unique fsid is persistent by default after it was created
> >  _scratch_mount -o uuid=on
> > @@ -119,7 +119,7 @@ ovl_fsid=$(stat -f -c '%i' $test_dir)
> >  [[ "$ovl_fsid" == "$ovl_unique_fsid" ]] || \
> >         echo "Overlayfs (uuid=on) unique fsid is not persistent"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >
> >  echo "Silence is golden"
> >  status=0
> > diff --git a/tests/overlay/083 b/tests/overlay/083
> > index d037d4c85..551471d45 100755
> > --- a/tests/overlay/083
> > +++ b/tests/overlay/083
> > @@ -52,7 +52,7 @@ $MOUNT_PROG -t overlay | grep ovl_esc_test  | tee -a $seqres.full | grep -v spac
> >
> >  # Re-create the upper/work dirs to mount them with a different lower
> >  # This is required in case index feature is enabled
> > -$UMOUNT_PROG $SCRATCH_MNT
> > +_unmount $SCRATCH_MNT
> >  rm -rf "$upperdir" "$workdir"
> >  mkdir -p "$upperdir" "$workdir"
> >
> > diff --git a/tests/overlay/084 b/tests/overlay/084
> > index 28e9a76dc..d0bf06ecb 100755
> > --- a/tests/overlay/084
> > +++ b/tests/overlay/084
> > @@ -15,7 +15,7 @@ _cleanup()
> >  {
> >         cd /
> >         # Unmount nested mounts if things fail
> > -       $UMOUNT_PROG $OVL_BASE_SCRATCH_MNT/nested  2>/dev/null
> > +       _unmount $OVL_BASE_SCRATCH_MNT/nested  2>/dev/null
> >         rm -rf $tmp
> >  }
> >
> > @@ -44,7 +44,7 @@ nesteddir=$OVL_BASE_SCRATCH_MNT/nested
> >
> >  umount_overlay()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  test_escape()
> > @@ -88,12 +88,12 @@ test_escape()
> >         echo "nested xattr mount with trusted.overlay"
> >         _overlay_mount_dirs $SCRATCH_MNT/layer2:$SCRATCH_MNT/layer1 - - overlayfs $nesteddir
> >         stat $nesteddir/dir/file  2>&1 | _filter_scratch
> > -       $UMOUNT_PROG $nesteddir
> > +       _unmount $nesteddir
> >
> >         echo "nested xattr mount with user.overlay"
> >         _overlay_mount_dirs $SCRATCH_MNT/layer2:$SCRATCH_MNT/layer1 - - -o userxattr overlayfs $nesteddir
> >         stat $nesteddir/dir/file  2>&1 | _filter_scratch
> > -       $UMOUNT_PROG $nesteddir
> > +       _unmount $nesteddir
> >
> >         # Also ensure propagate the escaped xattr when we copy-up layer2/dir
> >         echo "copy-up of escaped xattrs"
> > @@ -164,7 +164,7 @@ test_escaped_xwhiteout()
> >
> >         do_test_xwhiteout $prefix $nesteddir
> >
> > -       $UMOUNT_PROG $nesteddir
> > +       _unmount $nesteddir
> >  }
> >
> >  test_escaped_xwhiteout trusted
> > diff --git a/tests/overlay/085 b/tests/overlay/085
> > index 046d01d16..95665fba8 100755
> > --- a/tests/overlay/085
> > +++ b/tests/overlay/085
> > @@ -157,7 +157,7 @@ mount_ro_overlay()
> >
> >  umount_overlay()
> >  {
> > -       $UMOUNT_PROG $SCRATCH_MNT
> > +       _unmount $SCRATCH_MNT
> >  }
> >
> >  test_no_access()
> > diff --git a/tests/overlay/086 b/tests/overlay/086
> > index 9c8a00588..d0b2a76ca 100755
> > --- a/tests/overlay/086
> > +++ b/tests/overlay/086
> > @@ -38,21 +38,21 @@ $MOUNT_PROG -t overlay none $SCRATCH_MNT \
> >         2>> $seqres.full && \
> >         echo "ERROR: invalid combination of lowerdir and lowerdir+ mount options"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  $MOUNT_PROG -t overlay none $SCRATCH_MNT \
> >         -o"lowerdir=$lowerdir,datadir+=$lowerdir_colons" \
> >         -o redirect_dir=follow,metacopy=on 2>> $seqres.full && \
> >         echo "ERROR: invalid combination of lowerdir and datadir+ mount options"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  $MOUNT_PROG -t overlay none $SCRATCH_MNT \
> >         -o"datadir+=$lowerdir,lowerdir+=$lowerdir_colons" \
> >         -o redirect_dir=follow,metacopy=on 2>> $seqres.full && \
> >         echo "ERROR: invalid order of lowerdir+ and datadir+ mount options"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  # mount is expected to fail with escaped colons.
> >  $MOUNT_PROG -t overlay none $SCRATCH_MNT \
> > @@ -60,7 +60,7 @@ $MOUNT_PROG -t overlay none $SCRATCH_MNT \
> >         2>> $seqres.full && \
> >         echo "ERROR: incorrect parsing of escaped colons in lowerdir+ mount option"
> >
> > -$UMOUNT_PROG $SCRATCH_MNT 2>/dev/null
> > +_unmount $SCRATCH_MNT 2>/dev/null
> >
> >  # mount is expected to succeed without escaped colons.
> >  $MOUNT_PROG -t overlay ovl_esc_test $SCRATCH_MNT \
> 

Re: [PATCH] fstests: finish UMOUNT_PROG to _unmount conversion

[Dave Chinner]

On Wed, Feb 26, 2025 at 10:37:20AM +0000, Filipe Manana wrote:
> On Tue, Feb 25, 2025 at 10:19 PM Dave Chinner <david@fromorbit.com> wrote:
> > diff --git a/tests/btrfs/029 b/tests/btrfs/029
> > index c37ad63fb..1f8201af3 100755
> > --- a/tests/btrfs/029
> > +++ b/tests/btrfs/029
> > @@ -74,7 +74,7 @@ cp --reflink=always $orig_file $copy_file >> $seqres.full 2>&1 || echo "cp refli
> >  md5sum $orig_file | _filter_testdir_and_scratch
> >  md5sum $copy_file | _filter_testdir_and_scratch
> >
> > -$UMOUNT_PROG $reflink_test_dir
> > +_unmount $reflink_test_dir
> 
> This isn't equivalent to directly calling UMOUNT_PROG since the
> _unmount helper always redirects stdout and stderr to $seqres.full.

Please update your tree to the latest for-next. _unmount does,
indeed, return stdout/stderr to the caller, and so as the commit
message says, it is a drop-in replacement for UMOUNT_PROG.

I wouldn't have sent the patch in this form if that hadn't been
fixed.

-Dave.
-- 
Dave Chinner
david@fromorbit.com

[PATCH 2/2] btrfs/254: fix test failure in case scratch devices are larger than 50G

[fdmanana]

From: Filipe Manana <fdmanana@suse.com>

If the devices in the scratch pool have a size larger than 50G, then the
test fails due to chunk allocation failure when attempting to create a
multidevice filesystem on $lvdev and $scratch_dev2. This happens because
the $lvdev device has a size of 1G and metadata chunks have a size of 1G
for filesystems with a size greater than 50G, so mkfs fails when it
attempts to allocate chunks since it needs to allocate a 1G metadata
chunk plus a system chunk and a data chunk.

  $ ./check btrfs/254
  FSTYP         -- btrfs
  PLATFORM      -- Linux/x86_64 debian0 6.14.0-rc3-btrfs-next-187+ #1 SMP PREEMPT_DYNAMIC Tue Feb 18 10:53:23 WET 2025
  MKFS_OPTIONS  -- /dev/sdc
  MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1

  btrfs/254 2s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/254.out.bad)
      --- tests/btrfs/254.out	2024-10-07 12:36:15.532225987 +0100
      +++ /home/fdmanana/git/hub/xfstests/results//btrfs/254.out.bad	2025-02-19 18:07:06.479812229 +0000
      @@ -1,5 +1,13 @@
       QA output created by 254
      -Label: none  uuid: <UUID>
      -	Total devices <NUM> FS bytes used <SIZE>
      -	devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV
      -	*** Some devices missing
      +ERROR: not enough free space to allocate chunk
      +btrfs-progs v6.13
      ...
      (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/254.out /home/fdmanana/git/hub/xfstests/results//btrfs/254.out.bad'  to see the entire diff)

  HINT: You _MAY_ be missing kernel fix:
        770c79fb6550 btrfs: harden identification of a stale device

  Ran: btrfs/254
  Failures: btrfs/254
  Failed 1 of 1 tests

Fix this by creating a 2G $lvdev device instead of 1G.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
---
 tests/btrfs/254 | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/tests/btrfs/254 b/tests/btrfs/254
index 6523389b..ec303e24 100755
--- a/tests/btrfs/254
+++ b/tests/btrfs/254
@@ -44,8 +44,11 @@ _scratch_dev_pool_get 3
 
 setup_dmdev()
 {
-	# Some small size.
-	size=$((1024 * 1024 * 1024))
+	# On filesystems up to 50G the metadata chunk size if 256M, but on
+	# larger ones it's 1G, so use 2G to ensure the test doesn't fail with
+	# -ENOSPC when running mkfs against $lvdev and $scratch_dev2 in case
+	# the device at $scratch_dev2 has more capacity than 50G.
+	size=$((2 * 1024 * 1024 * 1024))
 	size_in_sector=$((size / 512))
 
 	table="0 $size_in_sector linear $SCRATCH_DEV 0"
-- 
2.45.2

Re: [PATCH 2/2] btrfs/254: fix test failure in case scratch devices are larger than 50G

[Anand Jain]

On 20/2/25 02:19, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> If the devices in the scratch pool have a size larger than 50G, then the
> test fails due to chunk allocation failure when attempting to create a
> multidevice filesystem on $lvdev and $scratch_dev2. This happens because
> the $lvdev device has a size of 1G and metadata chunks have a size of 1G
> for filesystems with a size greater than 50G, so mkfs fails when it
> attempts to allocate chunks since it needs to allocate a 1G metadata
> chunk plus a system chunk and a data chunk.
> 
>    $ ./check btrfs/254
>    FSTYP         -- btrfs
>    PLATFORM      -- Linux/x86_64 debian0 6.14.0-rc3-btrfs-next-187+ #1 SMP PREEMPT_DYNAMIC Tue Feb 18 10:53:23 WET 2025
>    MKFS_OPTIONS  -- /dev/sdc
>    MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
> 
>    btrfs/254 2s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/254.out.bad)
>        --- tests/btrfs/254.out	2024-10-07 12:36:15.532225987 +0100
>        +++ /home/fdmanana/git/hub/xfstests/results//btrfs/254.out.bad	2025-02-19 18:07:06.479812229 +0000
>        @@ -1,5 +1,13 @@
>         QA output created by 254
>        -Label: none  uuid: <UUID>
>        -	Total devices <NUM> FS bytes used <SIZE>
>        -	devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV
>        -	*** Some devices missing
>        +ERROR: not enough free space to allocate chunk
>        +btrfs-progs v6.13
>        ...
>        (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/254.out /home/fdmanana/git/hub/xfstests/results//btrfs/254.out.bad'  to see the entire diff)
> 
>    HINT: You _MAY_ be missing kernel fix:
>          770c79fb6550 btrfs: harden identification of a stale device
> 
>    Ran: btrfs/254
>    Failures: btrfs/254
>    Failed 1 of 1 tests
> 
> Fix this by creating a 2G $lvdev device instead of 1G.
> 
> Signed-off-by: Filipe Manana <fdmanana@suse.com>
> ---
>   tests/btrfs/254 | 7 +++++--
>   1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/tests/btrfs/254 b/tests/btrfs/254
> index 6523389b..ec303e24 100755
> --- a/tests/btrfs/254
> +++ b/tests/btrfs/254
> @@ -44,8 +44,11 @@ _scratch_dev_pool_get 3
>   
>   setup_dmdev()
>   {
> -	# Some small size.
> -	size=$((1024 * 1024 * 1024))
> +	# On filesystems up to 50G the metadata chunk size if 256M, but on
                                                             ^s
Typo if->is.

> +	# larger ones it's 1G, so use 2G to ensure the test doesn't fail with
> +	# -ENOSPC when running mkfs against $lvdev and $scratch_dev2 in case
> +	# the device at $scratch_dev2 has more capacity than 50G.
> +	size=$((2 * 1024 * 1024 * 1024))
>   	size_in_sector=$((size / 512))

Reviewed-by: Anand Jain <anand.jain@oracle.com>

Fixed and applied to for-next.

Thanks, Anand

>   
>   	table="0 $size_in_sector linear $SCRATCH_DEV 0"

Re: [PATCH 0/2] fstests: a couple fixes for btrfs/254

[David Sterba]

On Wed, Feb 19, 2025 at 06:19:13PM +0000, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> Fixes for btrfs/254, details in the change logs.
> 
> Filipe Manana (2):
>   btrfs/254: don't leave mount on test fs in case of failure/interruption
>   btrfs/254: fix test failure in case scratch devices are larger than 50G

Reviewed-by: David Sterba <dsterba@suse.com>

Re: [PATCH 0/2] fstests: a couple fixes for btrfs/254

[Qu Wenruo]

在 2025/2/20 04:49, fdmanana@kernel.org 写道:
> From: Filipe Manana <fdmanana@suse.com>
> 
> Fixes for btrfs/254, details in the change logs.

Reviewed-by: Qu Wenruo <wqu@suse.com>

Thanks,
Qu
> 
> Filipe Manana (2):
>    btrfs/254: don't leave mount on test fs in case of failure/interruption
>    btrfs/254: fix test failure in case scratch devices are larger than 50G
> 
>   tests/btrfs/254 | 8 ++++++--
>   1 file changed, 6 insertions(+), 2 deletions(-)
>