[PATCH v2] can: ucan: Use two USB endpoint API functions rather than duplicating their implementations

[Markus Elfring <Markus.Elfring@web.de>]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Thu, 26 Jun 2025 16:34:26 +0200

* Reuse existing functionality from usb_endpoint_is_bulk_in()
  and usb_endpoint_is_bulk_out() instead of keeping duplicate source code.

* Omit two comment lines which became redundant with this refactoring.

The source code was transformed by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---

V2:
Further change possibilities were taken better into account for
the USB endpoint API with the help of Vincent Mailhol.


 drivers/net/can/usb/ucan.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c
index 07406daf7c88..0935a9b540d6 100644
--- a/drivers/net/can/usb/ucan.c
+++ b/drivers/net/can/usb/ucan.c
@@ -1351,19 +1351,11 @@ static int ucan_probe(struct usb_interface *intf,
 	out_ep_size = 0;
 	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
 		ep = &iface_desc->endpoint[i].desc;
-
-		if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != 0) &&
-		    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		     USB_ENDPOINT_XFER_BULK)) {
-			/* In Endpoint */
+		if (usb_endpoint_is_bulk_in(ep)) {
 			in_ep_addr = ep->bEndpointAddress;
 			in_ep_addr &= USB_ENDPOINT_NUMBER_MASK;
 			in_ep_size = le16_to_cpu(ep->wMaxPacketSize);
-		} else if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ==
-			    0) &&
-			   ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-			    USB_ENDPOINT_XFER_BULK)) {
-			/* Out Endpoint */
+		} else if (usb_endpoint_is_bulk_out(ep)) {
 			out_ep_addr = ep->bEndpointAddress;
 			out_ep_addr &= USB_ENDPOINT_NUMBER_MASK;
 			out_ep_size = le16_to_cpu(ep->wMaxPacketSize);
-- 
2.50.0