RE: [PATCH v1 16/16] riscv: dts: starfive: jh8100: Add clocks and resets nodes

[JeeHeng Sia <jeeheng.sia@starfivetech.com>]

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: Saturday, December 9, 2023 1:57 AM
> To: JeeHeng Sia <jeeheng.sia@starfivetech.com>; kernel@esmil.dk; conor@kernel.org; robh+dt@kernel.org;
> krzysztof.kozlowski+dt@linaro.org; paul.walmsley@sifive.com; palmer@dabbelt.com; aou@eecs.berkeley.edu;
> mturquette@baylibre.com; sboyd@kernel.org; p.zabel@pengutronix.de; emil.renner.berthing@canonical.com; Hal Feng
> <hal.feng@starfivetech.com>; Xingyu Wu <xingyu.wu@starfivetech.com>
> Cc: linux-riscv@lists.infradead.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-clk@vger.kernel.org; Leyfoon Tan
> <leyfoon.tan@starfivetech.com>
> Subject: Re: [PATCH v1 16/16] riscv: dts: starfive: jh8100: Add clocks and resets nodes
> 
> On 06/12/2023 12:50, Sia Jee Heng wrote:
> > Add SYSCRG/SYSCRG-NE/SYSCRG-NW/SYSCRG-SW/AONCRG clock and reset
> > nodes for JH8100 RISC-V SoC.
> >
> > Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
> > Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
> 
> Really? Looks automated... Care to provide any links to effects of
> internal review?
https://gitlab.starfivetech.com/jeeheng.sia/linux/-/commits/JH8100_Upstream/
> 
> > ---
> >  arch/riscv/boot/dts/starfive/jh8100-clk.dtsi | 180 +++++++++++++++++++
> >  arch/riscv/boot/dts/starfive/jh8100.dtsi     | 115 ++++++++++++
> >  2 files changed, 295 insertions(+)
> >  create mode 100644 arch/riscv/boot/dts/starfive/jh8100-clk.dtsi
> >
> > diff --git a/arch/riscv/boot/dts/starfive/jh8100-clk.dtsi b/arch/riscv/boot/dts/starfive/jh8100-clk.dtsi
> > new file mode 100644
> > index 000000000000..27ba249f523e
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/starfive/jh8100-clk.dtsi
> > @@ -0,0 +1,180 @@
> > +// SPDX-License-Identifier: GPL-2.0 OR MIT
> > +/*
> > + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> > + */
> > +
> > +/ {
> > +	clk_osc: clk_osc {
> 
> No underscores in node names.
Noted.
> 
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <24000000>;
> > +	};
> > +
> 
> ...
> 
> > diff --git a/arch/riscv/boot/dts/starfive/jh8100.dtsi b/arch/riscv/boot/dts/starfive/jh8100.dtsi
> > index f26aff5c1ddf..9863c61324a0 100644
> > --- a/arch/riscv/boot/dts/starfive/jh8100.dtsi
> > +++ b/arch/riscv/boot/dts/starfive/jh8100.dtsi
> > @@ -4,6 +4,9 @@
> >   */
> >
> >  /dts-v1/;
> > +#include <dt-bindings/clock/starfive,jh8100-crg.h>
> > +#include <dt-bindings/reset/starfive,jh8100-crg.h>
> > +#include "jh8100-clk.dtsi"
> >
> >  / {
> >  	compatible = "starfive,jh8100";
> > @@ -357,6 +360,104 @@ uart4: serial@121a0000  {
> >  			status = "disabled";
> >  		};
> >
> > +		syscrg_ne: syscrg_ne@12320000 {
> 
> clock-controller@
> 
> Just open your bindings and take a look how it is done there...
> 
> This applies everywhere
> 
> Best regards,
> Krzysztof