Linux clock framework development
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bod.linux@nxsw.ie>
To: Jagadeesh Kona <quic_jkona@quicinc.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
	Dmitry Baryshkov <lumag@kernel.org>
Cc: Ajit Pandey <quic_ajipan@quicinc.com>,
	Imran Shaik <quic_imrashai@quicinc.com>,
	Taniya Das <quic_tdas@quicinc.com>,
	Satya Priya Kakitapalli <quic_skakitap@quicinc.com>,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
	Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: Re: [PATCH v5 09/18] clk: qcom: camcc-sm8450: Move PLL & clk configuration to really probe
Date: Tue, 03 Jun 2025 08:05:51 +0000	[thread overview]
Message-ID: <e602e789-2391-4812-bc2b-e3ef594b106e@nxsw.ie> (raw)
In-Reply-To: <20250530-videocc-pll-multi-pd-voting-v5-9-02303b3a582d@quicinc.com>

On 30/05/2025 14:20, Jagadeesh Kona wrote:
> Camera PLLs on SM8450/SM8475 require both MMCX and MXC rails to be
> kept ON to configure the PLLs properly. Hence move runtime power
> management, PLL configuration and enable critical clocks to
> qcom_cc_really_probe() which ensures all required power domains are in
> enabled state before configuring the PLLs or enabling the clocks.
> 
> This change also removes the modelling for cam_cc_gdsc_clk and keeps it
> always ON from probe since using CLK_IS_CRITICAL will prevent the clock
> controller associated power domains from collapsing due to clock framework
> invoking clk_pm_runtime_get() during prepare.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
> ---
>   drivers/clk/qcom/camcc-sm8450.c | 89 ++++++++++++++++++++---------------------
>   1 file changed, 44 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/clk/qcom/camcc-sm8450.c b/drivers/clk/qcom/camcc-sm8450.c
> index 08982737e4901c0703e19f8dd2d302e24748210c..4dd8be8cc9881c890d2e7c3a12f12816a9ab47dc 100644
> --- a/drivers/clk/qcom/camcc-sm8450.c
> +++ b/drivers/clk/qcom/camcc-sm8450.c
> @@ -86,6 +86,7 @@ static const struct alpha_pll_config sm8475_cam_cc_pll0_config = {
> 
>   static struct clk_alpha_pll cam_cc_pll0 = {
>   	.offset = 0x0,
> +	.config = &cam_cc_pll0_config,
>   	.vco_table = lucid_evo_vco,
>   	.num_vco = ARRAY_SIZE(lucid_evo_vco),
>   	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
> @@ -191,6 +192,7 @@ static const struct alpha_pll_config sm8475_cam_cc_pll1_config = {
> 
>   static struct clk_alpha_pll cam_cc_pll1 = {
>   	.offset = 0x1000,
> +	.config = &cam_cc_pll1_config,
>   	.vco_table = lucid_evo_vco,
>   	.num_vco = ARRAY_SIZE(lucid_evo_vco),
>   	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
> @@ -257,6 +259,7 @@ static const struct alpha_pll_config sm8475_cam_cc_pll2_config = {
> 
>   static struct clk_alpha_pll cam_cc_pll2 = {
>   	.offset = 0x2000,
> +	.config = &cam_cc_pll2_config,
>   	.vco_table = rivian_evo_vco,
>   	.num_vco = ARRAY_SIZE(rivian_evo_vco),
>   	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_RIVIAN_EVO],
> @@ -296,6 +299,7 @@ static const struct alpha_pll_config sm8475_cam_cc_pll3_config = {
> 
>   static struct clk_alpha_pll cam_cc_pll3 = {
>   	.offset = 0x3000,
> +	.config = &cam_cc_pll3_config,
>   	.vco_table = lucid_evo_vco,
>   	.num_vco = ARRAY_SIZE(lucid_evo_vco),
>   	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
> @@ -368,6 +372,7 @@ static const struct alpha_pll_config sm8475_cam_cc_pll4_config = {
> 
>   static struct clk_alpha_pll cam_cc_pll4 = {
>   	.offset = 0x4000,
> +	.config = &cam_cc_pll4_config,
>   	.vco_table = lucid_evo_vco,
>   	.num_vco = ARRAY_SIZE(lucid_evo_vco),
>   	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
> @@ -440,6 +445,7 @@ static const struct alpha_pll_config sm8475_cam_cc_pll5_config = {
> 
>   static struct clk_alpha_pll cam_cc_pll5 = {
>   	.offset = 0x5000,
> +	.config = &cam_cc_pll5_config,
>   	.vco_table = lucid_evo_vco,
>   	.num_vco = ARRAY_SIZE(lucid_evo_vco),
>   	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
> @@ -512,6 +518,7 @@ static const struct alpha_pll_config sm8475_cam_cc_pll6_config = {
> 
>   static struct clk_alpha_pll cam_cc_pll6 = {
>   	.offset = 0x6000,
> +	.config = &cam_cc_pll6_config,
>   	.vco_table = lucid_evo_vco,
>   	.num_vco = ARRAY_SIZE(lucid_evo_vco),
>   	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
> @@ -584,6 +591,7 @@ static const struct alpha_pll_config sm8475_cam_cc_pll7_config = {
> 
>   static struct clk_alpha_pll cam_cc_pll7 = {
>   	.offset = 0x7000,
> +	.config = &cam_cc_pll7_config,
>   	.vco_table = lucid_evo_vco,
>   	.num_vco = ARRAY_SIZE(lucid_evo_vco),
>   	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
> @@ -656,6 +664,7 @@ static const struct alpha_pll_config sm8475_cam_cc_pll8_config = {
> 
>   static struct clk_alpha_pll cam_cc_pll8 = {
>   	.offset = 0x8000,
> +	.config = &cam_cc_pll8_config,
>   	.vco_table = lucid_evo_vco,
>   	.num_vco = ARRAY_SIZE(lucid_evo_vco),
>   	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_EVO],
> @@ -1476,24 +1485,6 @@ static struct clk_rcg2 cam_cc_xo_clk_src = {
>   	},
>   };
> 
> -static struct clk_branch cam_cc_gdsc_clk = {
> -	.halt_reg = 0x1320c,
> -	.halt_check = BRANCH_HALT,
> -	.clkr = {
> -		.enable_reg = 0x1320c,
> -		.enable_mask = BIT(0),
> -		.hw.init = &(const struct clk_init_data) {
> -			.name = "cam_cc_gdsc_clk",
> -			.parent_hws = (const struct clk_hw*[]) {
> -				&cam_cc_xo_clk_src.clkr.hw,
> -			},
> -			.num_parents = 1,
> -			.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
> -			.ops = &clk_branch2_ops,
> -		},
> -	},
> -};
> -
>   static struct clk_branch cam_cc_bps_ahb_clk = {
>   	.halt_reg = 0x1004c,
>   	.halt_check = BRANCH_HALT,
> @@ -2819,7 +2810,6 @@ static struct clk_regmap *cam_cc_sm8450_clocks[] = {
>   	[CAM_CC_CSIPHY4_CLK] = &cam_cc_csiphy4_clk.clkr,
>   	[CAM_CC_CSIPHY5_CLK] = &cam_cc_csiphy5_clk.clkr,
>   	[CAM_CC_FAST_AHB_CLK_SRC] = &cam_cc_fast_ahb_clk_src.clkr,
> -	[CAM_CC_GDSC_CLK] = &cam_cc_gdsc_clk.clkr,
>   	[CAM_CC_ICP_AHB_CLK] = &cam_cc_icp_ahb_clk.clkr,
>   	[CAM_CC_ICP_CLK] = &cam_cc_icp_clk.clkr,
>   	[CAM_CC_ICP_CLK_SRC] = &cam_cc_icp_clk_src.clkr,
> @@ -2913,6 +2903,22 @@ static const struct qcom_reset_map cam_cc_sm8450_resets[] = {
>   	[CAM_CC_SFE_1_BCR] = { 0x13094 },
>   };
> 
> +static struct clk_alpha_pll *cam_cc_sm8450_plls[] = {
> +	&cam_cc_pll0,
> +	&cam_cc_pll1,
> +	&cam_cc_pll2,
> +	&cam_cc_pll3,
> +	&cam_cc_pll4,
> +	&cam_cc_pll5,
> +	&cam_cc_pll6,
> +	&cam_cc_pll7,
> +	&cam_cc_pll8,
> +};
> +
> +static u32 cam_cc_sm8450_critical_cbcrs[] = {
> +	0x1320c, /* CAM_CC_GDSC_CLK */
> +};
> +
>   static const struct regmap_config cam_cc_sm8450_regmap_config = {
>   	.reg_bits = 32,
>   	.reg_stride = 4,
> @@ -3021,6 +3027,13 @@ static struct gdsc *cam_cc_sm8450_gdscs[] = {
>   	[TITAN_TOP_GDSC] = &titan_top_gdsc,
>   };
> 
> +static struct qcom_cc_driver_data cam_cc_sm8450_driver_data = {
> +	.alpha_plls = cam_cc_sm8450_plls,
> +	.num_alpha_plls = ARRAY_SIZE(cam_cc_sm8450_plls),
> +	.clk_cbcrs = cam_cc_sm8450_critical_cbcrs,
> +	.num_clk_cbcrs = ARRAY_SIZE(cam_cc_sm8450_critical_cbcrs),
> +};
> +
>   static const struct qcom_cc_desc cam_cc_sm8450_desc = {
>   	.config = &cam_cc_sm8450_regmap_config,
>   	.clks = cam_cc_sm8450_clocks,
> @@ -3029,6 +3042,8 @@ static const struct qcom_cc_desc cam_cc_sm8450_desc = {
>   	.num_resets = ARRAY_SIZE(cam_cc_sm8450_resets),
>   	.gdscs = cam_cc_sm8450_gdscs,
>   	.num_gdscs = ARRAY_SIZE(cam_cc_sm8450_gdscs),
> +	.use_rpm = true,
> +	.driver_data = &cam_cc_sm8450_driver_data,
>   };
> 
>   static const struct of_device_id cam_cc_sm8450_match_table[] = {
> @@ -3040,12 +3055,6 @@ MODULE_DEVICE_TABLE(of, cam_cc_sm8450_match_table);
> 
>   static int cam_cc_sm8450_probe(struct platform_device *pdev)
>   {
> -	struct regmap *regmap;
> -
> -	regmap = qcom_cc_map(pdev, &cam_cc_sm8450_desc);
> -	if (IS_ERR(regmap))
> -		return PTR_ERR(regmap);
> -
>   	if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8475-camcc")) {
>   		/* Update CAMCC PLL0 */
>   		cam_cc_pll0.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE];
> @@ -3092,28 +3101,18 @@ static int cam_cc_sm8450_probe(struct platform_device *pdev)
>   		cam_cc_pll8_out_even.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE];
>   		cam_cc_pll8_out_even.clkr.hw.init = &sm8475_cam_cc_pll8_out_even_init;
> 
> -		clk_lucid_ole_pll_configure(&cam_cc_pll0, regmap, &sm8475_cam_cc_pll0_config);
> -		clk_lucid_ole_pll_configure(&cam_cc_pll1, regmap, &sm8475_cam_cc_pll1_config);
> -		clk_rivian_evo_pll_configure(&cam_cc_pll2, regmap, &sm8475_cam_cc_pll2_config);
> -		clk_lucid_ole_pll_configure(&cam_cc_pll3, regmap, &sm8475_cam_cc_pll3_config);
> -		clk_lucid_ole_pll_configure(&cam_cc_pll4, regmap, &sm8475_cam_cc_pll4_config);
> -		clk_lucid_ole_pll_configure(&cam_cc_pll5, regmap, &sm8475_cam_cc_pll5_config);
> -		clk_lucid_ole_pll_configure(&cam_cc_pll6, regmap, &sm8475_cam_cc_pll6_config);
> -		clk_lucid_ole_pll_configure(&cam_cc_pll7, regmap, &sm8475_cam_cc_pll7_config);
> -		clk_lucid_ole_pll_configure(&cam_cc_pll8, regmap, &sm8475_cam_cc_pll8_config);
> -	} else {
> -		clk_lucid_evo_pll_configure(&cam_cc_pll0, regmap, &cam_cc_pll0_config);
> -		clk_lucid_evo_pll_configure(&cam_cc_pll1, regmap, &cam_cc_pll1_config);
> -		clk_rivian_evo_pll_configure(&cam_cc_pll2, regmap, &cam_cc_pll2_config);
> -		clk_lucid_evo_pll_configure(&cam_cc_pll3, regmap, &cam_cc_pll3_config);
> -		clk_lucid_evo_pll_configure(&cam_cc_pll4, regmap, &cam_cc_pll4_config);
> -		clk_lucid_evo_pll_configure(&cam_cc_pll5, regmap, &cam_cc_pll5_config);
> -		clk_lucid_evo_pll_configure(&cam_cc_pll6, regmap, &cam_cc_pll6_config);
> -		clk_lucid_evo_pll_configure(&cam_cc_pll7, regmap, &cam_cc_pll7_config);
> -		clk_lucid_evo_pll_configure(&cam_cc_pll8, regmap, &cam_cc_pll8_config);
> +		cam_cc_pll0.config = &sm8475_cam_cc_pll0_config;
> +		cam_cc_pll1.config = &sm8475_cam_cc_pll1_config;
> +		cam_cc_pll2.config = &sm8475_cam_cc_pll2_config;
> +		cam_cc_pll3.config = &sm8475_cam_cc_pll3_config;
> +		cam_cc_pll4.config = &sm8475_cam_cc_pll4_config;
> +		cam_cc_pll5.config = &sm8475_cam_cc_pll5_config;
> +		cam_cc_pll6.config = &sm8475_cam_cc_pll6_config;
> +		cam_cc_pll7.config = &sm8475_cam_cc_pll7_config;
> +		cam_cc_pll8.config = &sm8475_cam_cc_pll8_config;
>   	}
> 
> -	return qcom_cc_really_probe(&pdev->dev, &cam_cc_sm8450_desc, regmap);
> +	return qcom_cc_probe(pdev, &cam_cc_sm8450_desc);
>   }
> 
>   static struct platform_driver cam_cc_sm8450_driver = {
> 
> --
> 2.34.1
> 
> 
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>


  reply	other threads:[~2025-06-03  8:06 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-30 13:20 [PATCH v5 00/18] clk: qcom: Add support to attach multiple power domains in cc probe Jagadeesh Kona
2025-05-30 13:20 ` [PATCH v5 01/18] dt-bindings: clock: qcom,sm8450-videocc: Add MXC power domain Jagadeesh Kona
2025-05-30 13:20 ` [PATCH v5 02/18] dt-bindings: clock: qcom,sm8450-camcc: Allow to specify two power domains Jagadeesh Kona
2025-05-30 13:20 ` [PATCH v5 03/18] dt-bindings: clock: qcom,sm8450-camcc: Move sc8280xp camcc to sa8775p camcc Jagadeesh Kona
2025-06-03  7:04   ` Krzysztof Kozlowski
2025-05-30 13:20 ` [PATCH v5 04/18] clk: qcom: clk-alpha-pll: Add support for common PLL configuration function Jagadeesh Kona
2025-05-30 13:20 ` [PATCH v5 05/18] clk: qcom: common: Handle runtime power management in qcom_cc_really_probe Jagadeesh Kona
2025-05-30 13:20 ` [PATCH v5 06/18] clk: qcom: common: Add support to configure clk regs " Jagadeesh Kona
2025-05-30 23:00   ` Konrad Dybcio
2025-05-30 13:20 ` [PATCH v5 07/18] clk: qcom: videocc-sm8450: Move PLL & clk configuration to really probe Jagadeesh Kona
2025-05-30 13:20 ` [PATCH v5 08/18] clk: qcom: videocc-sm8550: " Jagadeesh Kona
2025-05-30 22:57   ` Konrad Dybcio
2025-06-03  8:02   ` Bryan O'Donoghue
2025-05-30 13:20 ` [PATCH v5 09/18] clk: qcom: camcc-sm8450: " Jagadeesh Kona
2025-06-03  8:05   ` Bryan O'Donoghue [this message]
2025-05-30 13:20 ` [PATCH v5 10/18] clk: qcom: camcc-sm8550: " Jagadeesh Kona
2025-06-03  8:06   ` Bryan O'Donoghue
2025-05-30 13:20 ` [PATCH v5 11/18] clk: qcom: camcc-sm8650: " Jagadeesh Kona
2025-06-03  8:07   ` Bryan O'Donoghue
2025-05-30 13:20 ` [PATCH v5 12/18] clk: qcom: camcc-x1e80100: " Jagadeesh Kona
2025-05-30 13:20 ` [PATCH v5 13/18] arm64: dts: qcom: sm8450: Additionally manage MXC power domain in videocc Jagadeesh Kona
2025-05-30 13:20 ` [PATCH v5 14/18] arm64: dts: qcom: sm8550: " Jagadeesh Kona
2025-05-30 13:21 ` [PATCH v5 15/18] arm64: dts: qcom: sm8650: " Jagadeesh Kona
2025-05-30 13:21 ` [PATCH v5 16/18] arm64: dts: qcom: sm8450: Additionally manage MXC power domain in camcc Jagadeesh Kona
2025-06-03  8:08   ` Bryan O'Donoghue
2025-05-30 13:21 ` [PATCH v5 17/18] arm64: dts: qcom: sm8550: " Jagadeesh Kona
2025-06-03  8:09   ` Bryan O'Donoghue
2025-05-30 13:21 ` [PATCH v5 18/18] arm64: dts: qcom: sm8650: " Jagadeesh Kona
2025-06-03  8:09   ` Bryan O'Donoghue
2025-06-03  8:09 ` [PATCH v5 00/18] clk: qcom: Add support to attach multiple power domains in cc probe Bryan O'Donoghue
2025-06-12  4:00 ` (subset) " Bjorn Andersson
2025-06-12 10:03   ` Jagadeesh Kona
2025-06-12 10:52     ` Krzysztof Kozlowski
2025-06-16  7:25       ` Jagadeesh Kona
2025-06-17 13:27         ` Bjorn Andersson
2025-06-17 19:16           ` Jagadeesh Kona
2025-07-29 14:49 ` neil.armstrong
2025-07-30  9:50   ` Jagadeesh Kona

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e602e789-2391-4812-bc2b-e3ef594b106e@nxsw.ie \
    --to=bod.linux@nxsw.ie \
    --cc=andersson@kernel.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@oss.qualcomm.com \
    --cc=konrad.dybcio@oss.qualcomm.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lumag@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=quic_ajipan@quicinc.com \
    --cc=quic_imrashai@quicinc.com \
    --cc=quic_jkona@quicinc.com \
    --cc=quic_skakitap@quicinc.com \
    --cc=quic_tdas@quicinc.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=vladimir.zapolskiy@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox