From: Dave Jiang <dave.jiang@intel.com>
To: linux-cxl@vger.kernel.org
Cc: dan.j.williams@intel.com, ira.weiny@intel.com,
vishal.l.verma@intel.com, alison.schofield@intel.com,
Jonathan.Cameron@huawei.com, dave@stgolabs.net, jgg@nvidia.com,
shiju.jose@huawei.com
Subject: [RFC PATCH v2 06/20] cxl/mbox: Add SET_FEATURE mailbox command
Date: Fri, 15 Nov 2024 14:25:39 -0700 [thread overview]
Message-ID: <20241115212745.869552-7-dave.jiang@intel.com> (raw)
In-Reply-To: <20241115212745.869552-1-dave.jiang@intel.com>
From: Shiju Jose <shiju.jose@huawei.com>
Add support for SET_FEATURE mailbox command.
CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
CXL devices supports features with changeable attributes.
The settings of a feature can be optionally modified using Set Feature
command.
CXL spec 3.1 section 8.2.9.6.3 describes Set Feature command.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
This patch is not needed except for the opcode enumeration.
---
drivers/cxl/core/mbox.c | 73 +++++++++++++++++++++++++++++++++++++++++
drivers/cxl/cxlmem.h | 34 +++++++++++++++++++
2 files changed, 107 insertions(+)
diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index f49665d3b4d6..4b9abf9a5b2b 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -1010,6 +1010,79 @@ size_t cxl_get_feature(struct cxl_dev_state *cxlds, const uuid_t feat_uuid,
}
EXPORT_SYMBOL_NS_GPL(cxl_get_feature, CXL);
+/*
+ * FEAT_DATA_MIN_PAYLOAD_SIZE - min extra number of bytes should be
+ * available in the mailbox for storing the actual feature data so that
+ * the feature data transfer would work as expected.
+ */
+#define FEAT_DATA_MIN_PAYLOAD_SIZE 10
+int cxl_set_feature(struct cxl_dev_state *cxlds,
+ const uuid_t feat_uuid, u8 feat_version,
+ void *feat_data, size_t feat_data_size,
+ u8 feat_flag)
+{
+ struct cxl_mailbox *cxl_mbox = &cxlds->cxl_mbox;
+ struct cxl_memdev_set_feat_pi {
+ struct cxl_mbox_set_feat_hdr hdr;
+ u8 feat_data[];
+ } __packed;
+ size_t data_in_size, data_sent_size = 0;
+ struct cxl_mbox_cmd mbox_cmd;
+ size_t hdr_size;
+ int rc = 0;
+
+ struct cxl_memdev_set_feat_pi *pi __free(kfree) =
+ kmalloc(cxl_mbox->payload_size, GFP_KERNEL);
+ pi->hdr.uuid = feat_uuid;
+ pi->hdr.version = feat_version;
+ feat_flag &= ~CXL_SET_FEAT_FLAG_DATA_TRANSFER_MASK;
+ feat_flag |= CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET;
+ hdr_size = sizeof(pi->hdr);
+ /*
+ * Check minimum mbox payload size is available for
+ * the feature data transfer.
+ */
+ if (hdr_size + FEAT_DATA_MIN_PAYLOAD_SIZE > cxl_mbox->payload_size)
+ return -ENOMEM;
+
+ if ((hdr_size + feat_data_size) <= cxl_mbox->payload_size) {
+ pi->hdr.flags = cpu_to_le32(feat_flag |
+ CXL_SET_FEAT_FLAG_FULL_DATA_TRANSFER);
+ data_in_size = feat_data_size;
+ } else {
+ pi->hdr.flags = cpu_to_le32(feat_flag |
+ CXL_SET_FEAT_FLAG_INITIATE_DATA_TRANSFER);
+ data_in_size = cxl_mbox->payload_size - hdr_size;
+ }
+
+ do {
+ pi->hdr.offset = cpu_to_le16(data_sent_size);
+ memcpy(pi->feat_data, feat_data + data_sent_size, data_in_size);
+ mbox_cmd = (struct cxl_mbox_cmd) {
+ .opcode = CXL_MBOX_OP_SET_FEATURE,
+ .size_in = hdr_size + data_in_size,
+ .payload_in = pi,
+ };
+ rc = cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
+ if (rc < 0)
+ return rc;
+
+ data_sent_size += data_in_size;
+ if (data_sent_size >= feat_data_size)
+ return 0;
+
+ if ((feat_data_size - data_sent_size) <= (cxl_mbox->payload_size - hdr_size)) {
+ data_in_size = feat_data_size - data_sent_size;
+ pi->hdr.flags = cpu_to_le32(feat_flag |
+ CXL_SET_FEAT_FLAG_FINISH_DATA_TRANSFER);
+ } else {
+ pi->hdr.flags = cpu_to_le32(feat_flag |
+ CXL_SET_FEAT_FLAG_CONTINUE_DATA_TRANSFER);
+ }
+ } while (true);
+}
+EXPORT_SYMBOL_NS_GPL(cxl_set_feature, CXL);
+
/**
* cxl_enumerate_cmds() - Enumerate commands for a device.
* @mds: The driver data for the operation
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 8fa3a817a0dd..2c15817c80a5 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -492,6 +492,7 @@ enum cxl_opcode {
CXL_MBOX_OP_GET_SUP_LOG_SUBLIST = 0x0405,
CXL_MBOX_OP_GET_SUPPORTED_FEATURES = 0x0500,
CXL_MBOX_OP_GET_FEATURE = 0x0501,
+ CXL_MBOX_OP_SET_FEATURE = 0x0502,
CXL_MBOX_OP_IDENTIFY = 0x4000,
CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100,
CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
@@ -823,6 +824,35 @@ struct cxl_mbox_get_feat_in {
u8 selection;
} __packed;
+/*
+ * Set Feature CXL 3.1 Spec 8.2.9.6.3
+ */
+
+/*
+ * Set Feature input payload
+ * CXL rev 3.1 section 8.2.9.6.3 Table 8-101
+ */
+/* Set Feature : Payload in flags */
+#define CXL_SET_FEAT_FLAG_DATA_TRANSFER_MASK GENMASK(2, 0)
+enum cxl_set_feat_flag_data_transfer {
+ CXL_SET_FEAT_FLAG_FULL_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_INITIATE_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_CONTINUE_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_FINISH_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_ABORT_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_DATA_TRANSFER_MAX
+};
+
+#define CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET BIT(3)
+
+struct cxl_mbox_set_feat_hdr {
+ uuid_t uuid;
+ __le32 flags;
+ __le16 offset;
+ u8 version;
+ u8 rsvd[9];
+} __packed;
+
int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
struct cxl_mbox_cmd *cmd);
int cxl_dev_state_identify(struct cxl_memdev_state *mds);
@@ -889,4 +919,8 @@ int cxl_get_supported_feature_entry(struct cxl_dev_state *cxlds, const uuid_t *f
size_t cxl_get_feature(struct cxl_dev_state *cxlds, const uuid_t feat_uuid,
enum cxl_get_feat_selection selection,
void *feat_out, size_t feat_out_size);
+int cxl_set_feature(struct cxl_dev_state *cxlds,
+ const uuid_t feat_uuid, u8 feat_version,
+ void *feat_data, size_t feat_data_size,
+ u8 feat_flag);
#endif /* __CXL_MEM_H__ */
--
2.47.0
next prev parent reply other threads:[~2024-11-15 21:27 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-15 21:25 [RFC PATCH v2 0/20] fwctl/cxl: Add CXL feature commands support via fwctl Dave Jiang
2024-11-15 21:25 ` [RFC PATCH v2 01/20] cxl: Refactor user ioctl command path from mds to mailbox Dave Jiang
2024-11-21 17:33 ` Jonathan Cameron
2024-12-06 0:00 ` Dan Williams
2024-11-15 21:25 ` [RFC PATCH v2 02/20] cxl: Add Get Supported Features command for kernel usage Dave Jiang
2024-11-21 17:42 ` Jonathan Cameron
2024-12-06 0:33 ` Dan Williams
2024-12-09 12:20 ` Shiju Jose
2024-11-15 21:25 ` [RFC PATCH v2 03/20] cxl/test: Add Get Supported Features mailbox command support Dave Jiang
2024-11-21 17:45 ` Jonathan Cameron
2024-12-06 0:36 ` Dan Williams
2024-11-15 21:25 ` [RFC PATCH v2 04/20] cxl/mbox: Add GET_FEATURE mailbox command Dave Jiang
2024-12-06 0:44 ` Dan Williams
2024-12-09 12:20 ` Shiju Jose
2024-11-15 21:25 ` [RFC PATCH v2 05/20] cxl: Add Get Feature command support for user submission Dave Jiang
2024-11-21 17:47 ` Jonathan Cameron
2024-11-22 20:14 ` Dave Jiang
2024-11-25 20:14 ` Shiju Jose
2024-12-06 0:45 ` Dan Williams
2024-11-15 21:25 ` Dave Jiang [this message]
2024-12-06 0:48 ` [RFC PATCH v2 06/20] cxl/mbox: Add SET_FEATURE mailbox command Dan Williams
2024-12-09 12:20 ` Shiju Jose
2024-11-15 21:25 ` [RFC PATCH v2 07/20] cxl: Add Set Feature command support for user submission Dave Jiang
2024-11-21 17:49 ` Jonathan Cameron
2024-11-21 18:08 ` Dave Jiang
2024-11-22 14:17 ` Jonathan Cameron
2024-12-06 0:53 ` Dan Williams
2024-11-15 21:25 ` [RFC PATCH v2 08/20] cxl: Move cxl_driver related bits to be usable by external drivers Dave Jiang
2024-11-21 17:55 ` Jonathan Cameron
2024-11-15 21:25 ` [RFC PATCH v2 09/20] fwctl/cxl: Add driver for CXL mailbox for handling CXL features commands Dave Jiang
2024-11-20 18:01 ` Jason Gunthorpe
2024-11-20 18:35 ` Dave Jiang
2024-11-21 18:02 ` Jonathan Cameron
2024-12-06 1:21 ` Dan Williams
2024-12-09 13:30 ` Jason Gunthorpe
2024-12-09 20:35 ` Dan Williams
2024-12-10 13:40 ` Jason Gunthorpe
2024-11-15 21:25 ` [RFC PATCH v2 10/20] fwctl/cxl: Add support for get driver information Dave Jiang
2024-11-20 18:05 ` Jason Gunthorpe
2024-11-21 18:11 ` Jonathan Cameron
2024-11-22 23:22 ` Dave Jiang
2024-11-25 18:06 ` Jonathan Cameron
2024-12-06 5:15 ` Dan Williams
2024-11-15 21:25 ` [RFC PATCH v2 11/20] fwctl: FWCTL_HW_INFO to return hardware information Dave Jiang
2024-11-20 18:53 ` Jason Gunthorpe
2024-11-21 18:20 ` Jonathan Cameron
2024-11-22 22:42 ` Dave Jiang
2024-12-06 5:32 ` Dan Williams
2024-12-06 18:39 ` Dave Jiang
2024-12-09 13:32 ` Jason Gunthorpe
2024-11-15 21:25 ` [RFC PATCH v2 12/20] cxl: Save Command Effects Log (CEL) effects for enabled commands Dave Jiang
2024-11-21 18:22 ` Jonathan Cameron
2024-11-15 21:25 ` [RFC PATCH v2 13/20] fwctl/cxl: Add hw_info callback Dave Jiang
2024-11-21 18:26 ` Jonathan Cameron
2024-12-06 5:40 ` Dan Williams
2024-11-15 21:25 ` [RFC PATCH v2 14/20] cxl: Move defines and error codes from cxlmem.h to cxl/mailbox.h Dave Jiang
2024-11-21 18:31 ` Jonathan Cameron
2024-12-06 5:50 ` Dan Williams
2024-11-15 21:25 ` [RFC PATCH v2 15/20] fwctl/cxl: Add support for fwctl RPC command to enable CXL feature commands Dave Jiang
2024-11-20 18:42 ` Jason Gunthorpe
2024-11-22 14:49 ` Jonathan Cameron
2024-12-06 6:13 ` Dan Williams
2024-11-15 21:25 ` [RFC PATCH v2 16/20] fwctl/cxl: Add support to filter exclusive features Dave Jiang
2024-11-22 15:05 ` Jonathan Cameron
2024-12-03 18:06 ` Dave Jiang
2024-11-15 21:25 ` [RFC PATCH v2 17/20] cxl/test: Add Get Feature support to cxl_test Dave Jiang
2024-11-22 15:19 ` Jonathan Cameron
2024-11-15 21:25 ` [RFC PATCH v2 18/20] cxl/test: Add Set " Dave Jiang
2024-11-22 15:20 ` Jonathan Cameron
2024-11-15 21:25 ` [RFC PATCH v2 19/20] fwctl: Move fwctl documentation to its own directory Dave Jiang
2024-11-20 17:52 ` Jason Gunthorpe
2024-11-15 21:25 ` [RFC PATCH v2 20/20] fwctl/cxl: Add documentation to FWCTL CXL Dave Jiang
2024-11-22 15:26 ` Jonathan Cameron
2024-12-03 21:07 ` Dave Jiang
2024-12-06 21:10 ` Dan Williams
2024-11-20 18:57 ` [RFC PATCH v2 0/20] fwctl/cxl: Add CXL feature commands support via fwctl Jason Gunthorpe
2024-11-21 18:38 ` Jonathan Cameron
2025-01-21 20:30 ` Jason Gunthorpe
2025-01-21 20:34 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241115212745.869552-7-dave.jiang@intel.com \
--to=dave.jiang@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jgg@nvidia.com \
--cc=linux-cxl@vger.kernel.org \
--cc=shiju.jose@huawei.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox