From: Sven Peter <sven@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Janne Grunau <j@jannau.net>, Neal Gompa <neal@gompa.dev>,
Andreas Noever <andreas.noever@gmail.com>,
Mika Westerberg <westeri@kernel.org>,
Yehezkel Bernat <YehezkelShB@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, asahi@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
Sven Peter <sven@kernel.org>
Subject: [PATCH 12/19] thunderbolt: Add ring_configure to tb_nhi_ops
Date: Sun, 30 Aug 2026 22:19:30 +0200 [thread overview]
Message-ID: <20260830-b4-apple-soc-tbt-v1-12-44bc9348683c@kernel.org> (raw)
In-Reply-To: <20260830-b4-apple-soc-tbt-v1-0-44bc9348683c@kernel.org>
The Apple NHI has to configure and enable each ring with a single write
and uses a separate register range for the receive ring PDF masks. Add
an optional tb_nhi_ops hook for it which falls back to the standard USB4
NHI method when it is not set.
Signed-off-by: Sven Peter <sven@kernel.org>
---
drivers/thunderbolt/nhi.c | 55 ++++++++++++++++++++++++++++++-----------------
drivers/thunderbolt/nhi.h | 4 ++++
2 files changed, 39 insertions(+), 20 deletions(-)
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index 3cb69deec63e..696da52abff6 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -239,6 +239,31 @@ static void ring_iowrite32options(struct tb_ring *ring, u32 value, u32 offset)
iowrite32(value, ring_options_base(ring) + offset);
}
+static void ring_configure(struct tb_ring *ring, u32 flags, u32 e2e_flags)
+{
+ if (ring->is_tx)
+ ring_iowrite32options(ring, 0, 4);
+ else
+ ring_iowrite32options(ring, ring->sof_mask << 16 | ring->eof_mask, 4);
+
+ ring_iowrite32options(ring, flags, 0);
+
+ /*
+ * Now that the ring valid bit is set we can configure E2E if
+ * enabled for the ring.
+ */
+ if (e2e_flags)
+ ring_iowrite32options(ring, flags | e2e_flags, 0);
+}
+
+static void nhi_ring_configure(struct tb_ring *ring, u32 flags, u32 e2e_flags)
+{
+ if (ring->nhi->ops->ring_configure)
+ ring->nhi->ops->ring_configure(ring, flags, e2e_flags);
+ else
+ ring_configure(ring, flags, e2e_flags);
+}
+
static bool ring_full(struct tb_ring *ring)
{
return ((ring->head + 1) % ring->size) == ring->tail;
@@ -694,6 +719,7 @@ EXPORT_SYMBOL_GPL(tb_ring_alloc_rx);
*/
void tb_ring_start(struct tb_ring *ring)
{
+ u32 e2e_flags = 0;
u16 frame_size;
u32 flags;
@@ -717,30 +743,13 @@ void tb_ring_start(struct tb_ring *ring)
flags = RING_FLAG_ENABLE | RING_FLAG_RAW;
}
- ring_iowrite64desc(ring, ring->descriptors_dma, 0);
- if (ring->is_tx) {
- ring_iowrite32desc(ring, ring->size, 12);
- ring_iowrite32options(ring, 0, 4);
- ring_iowrite32options(ring, flags, 0);
- } else {
- u32 sof_eof_mask = ring->sof_mask << 16 | ring->eof_mask;
-
- ring_iowrite32desc(ring, (frame_size << 16) | ring->size, 12);
- ring_iowrite32options(ring, sof_eof_mask, 4);
- ring_iowrite32options(ring, flags, 0);
- }
-
- /*
- * Now that the ring valid bit is set we can configure E2E if
- * enabled for the ring.
- */
if (ring->flags & RING_FLAG_E2E) {
if (!ring->is_tx) {
u32 hop;
hop = ring->e2e_tx_hop << REG_RX_OPTIONS_E2E_HOP_SHIFT;
hop &= REG_RX_OPTIONS_E2E_HOP_MASK;
- flags |= hop;
+ e2e_flags |= hop;
dev_dbg(ring->nhi->dev,
"enabling E2E for %s %d with TX HopID %d\n",
@@ -750,10 +759,16 @@ void tb_ring_start(struct tb_ring *ring)
RING_TYPE(ring), ring->hop);
}
- flags |= RING_FLAG_E2E_FLOW_CONTROL;
- ring_iowrite32options(ring, flags, 0);
+ e2e_flags |= RING_FLAG_E2E_FLOW_CONTROL;
}
+ ring_iowrite64desc(ring, ring->descriptors_dma, 0);
+ if (ring->is_tx)
+ ring_iowrite32desc(ring, ring->size, 12);
+ else
+ ring_iowrite32desc(ring, (frame_size << 16) | ring->size, 12);
+ nhi_ring_configure(ring, flags, e2e_flags);
+
if (!(ring->flags & RING_FLAG_NO_INTERRUPT))
nhi_ring_interrupt_active(ring, true);
ring->running = true;
diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index 5f70d7ddc2e2..670b48efeec5 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -76,6 +76,9 @@ struct tb_nhi_ring_layout {
* @ring_interrupt_mask: NHI specific hook to mask/unmask the interrupt of a
* single ring. If not set the standard USB4 NHI
* registers are used.
+ * @ring_configure: NHI specific hook to program the ring options registers
+ * and enable the ring with the given flags. If not set
+ * the standard USB4 NHI registers are used.
* @is_present: Whether the device is currently present on the parent bus
* @init_interrupts: NHI specific interrupt initialization hook
* @reset_interface: Resets the host interface
@@ -93,6 +96,7 @@ struct tb_nhi_ops {
void (*release_ring_irq)(struct tb_ring *ring);
void (*ring_interrupt_active)(struct tb_ring *ring, bool active);
void (*ring_interrupt_mask)(struct tb_ring *ring, bool mask);
+ void (*ring_configure)(struct tb_ring *ring, u32 flags, u32 e2e_flags);
bool (*is_present)(struct tb_nhi *nhi);
int (*init_interrupts)(struct tb_nhi *nhi);
void (*reset_interface)(struct tb_nhi *nhi);
--
2.55.0
next prev parent reply other threads:[~2026-08-30 20:19 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-30 20:19 [PATCH 00/19] Initial USB4/Thunderbolt support for Apple M1/M2/M3 SoCs Sven Peter
2026-08-30 20:19 ` [PATCH 01/19] dt-bindings: usb: Add thunderbolt-switch property Sven Peter
2026-08-30 20:19 ` [PATCH 02/19] usb: typec: Add thunderbolt switch Sven Peter
2026-08-30 20:30 ` sashiko-bot
2026-09-01 11:17 ` Heikki Krogerus
2026-09-01 18:53 ` Sven Peter
2026-08-30 20:19 ` [PATCH 03/19] usb: typec: tipd: Hook up Thunderbolt switch for CD321x Sven Peter
2026-08-30 20:36 ` sashiko-bot
2026-08-30 20:19 ` [PATCH 04/19] dt-bindings: thunderbolt: Add Apple USB4/Thunderbolt NHI Sven Peter
2026-08-30 20:19 ` [PATCH 05/19] dt-bindings: thunderbolt: Add Apple USB4/Thunderbolt ACIO block Sven Peter
2026-08-30 20:31 ` sashiko-bot
2026-08-30 20:19 ` [PATCH 06/19] thunderbolt: Try reading host DROM from device tree first Sven Peter
2026-08-30 20:33 ` sashiko-bot
2026-09-01 8:48 ` Mika Westerberg
2026-08-30 20:19 ` [PATCH 07/19] thunderbolt: Don't read the UID if we already know it Sven Peter
2026-08-30 20:19 ` [PATCH 08/19] thunderbolt: Allocate ring HopID before requesting the ring interrupt Sven Peter
2026-08-30 20:32 ` sashiko-bot
2026-08-30 20:19 ` [PATCH 09/19] thunderbolt: Add ring_interrupt_active to tb_nhi_ops Sven Peter
2026-08-30 20:19 ` [PATCH 10/19] thunderbolt: Make the ring register layout configurable Sven Peter
2026-09-01 8:58 ` Mika Westerberg
2026-09-01 18:56 ` Sven Peter
2026-08-30 20:19 ` [PATCH 11/19] thunderbolt: Add ring_interrupt_mask to tb_nhi_ops Sven Peter
2026-08-30 20:19 ` Sven Peter [this message]
2026-08-30 20:28 ` [PATCH 12/19] thunderbolt: Add ring_configure " sashiko-bot
2026-08-30 20:19 ` [PATCH 13/19] thunderbolt: Add QUIRK_NO_DMA_PORT Sven Peter
2026-09-01 9:04 ` Mika Westerberg
2026-09-01 17:06 ` Sven Peter
2026-08-30 20:19 ` [PATCH 14/19] thunderbolt: Add QUIRK_NO_USB3_BW_ALLOC Sven Peter
2026-09-01 9:12 ` Mika Westerberg
2026-08-30 20:19 ` [PATCH 15/19] thunderbolt: Export symbols required by the Apple Silicon driver Sven Peter
2026-08-30 20:19 ` [PATCH 16/19] thunderbolt: Add Apple Silicon support Sven Peter
2026-08-30 20:39 ` sashiko-bot
2026-09-01 10:09 ` Mika Westerberg
2026-09-01 19:06 ` Sven Peter
2026-08-30 20:19 ` [PATCH 17/19] arm64: dts: apple: t8103: Add USB4 ACIO and NHI Sven Peter
2026-09-01 10:20 ` Mika Westerberg
2026-08-30 20:19 ` [PATCH 18/19] arm64: dts: apple: t8112: " Sven Peter
2026-08-30 20:39 ` sashiko-bot
2026-08-30 20:19 ` [PATCH 19/19] arm64: dts: apple: t60xx: " Sven Peter
2026-08-31 17:44 ` [PATCH 00/19] Initial USB4/Thunderbolt support for Apple M1/M2/M3 SoCs Joshua Peisach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260830-b4-apple-soc-tbt-v1-12-44bc9348683c@kernel.org \
--to=sven@kernel.org \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=asahi@lists.linux.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=j@jannau.net \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=neal@gompa.dev \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=westeri@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox