[PATCH 09/19] thunderbolt: Add ring_interrupt_active to tb_nhi_ops

[Sven Peter <sven@kernel.org>]

The Apple NHI enables and disables ring interrupts differently. Add an
optional tb_nhi_ops hook to override ring_interrupt_active which falls
back to the standard USB4 method when it is not set.

Signed-off-by: Sven Peter <sven@kernel.org>
---
 drivers/thunderbolt/nhi.c | 12 ++++++++++--
 drivers/thunderbolt/nhi.h |  4 ++++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index 6a97dcd57deb..fc54ff7edfb9 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -149,6 +149,14 @@ static void ring_interrupt_active(struct tb_ring *ring, bool active)
 		nhi_mask_interrupt(ring->nhi, mask, index);
 }
 
+static void nhi_ring_interrupt_active(struct tb_ring *ring, bool active)
+{
+	if (ring->nhi->ops->ring_interrupt_active)
+		ring->nhi->ops->ring_interrupt_active(ring, active);
+	else
+		ring_interrupt_active(ring, active);
+}
+
 /*
  * nhi_disable_interrupts() - disable interrupts for all rings
  *
@@ -724,7 +732,7 @@ void tb_ring_start(struct tb_ring *ring)
 	}
 
 	if (!(ring->flags & RING_FLAG_NO_INTERRUPT))
-		ring_interrupt_active(ring, true);
+		nhi_ring_interrupt_active(ring, true);
 	ring->running = true;
 err:
 	spin_unlock(&ring->lock);
@@ -785,7 +793,7 @@ void tb_ring_stop(struct tb_ring *ring)
 		goto err;
 	}
 	if (!(ring->flags & RING_FLAG_NO_INTERRUPT))
-		ring_interrupt_active(ring, false);
+		nhi_ring_interrupt_active(ring, false);
 
 	ring_iowrite32options(ring, 0, 0);
 	ring_iowrite64desc(ring, 0, 0);
diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index f72d6b274501..4884c3f5a2b2 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -52,6 +52,9 @@ extern const struct dev_pm_ops nhi_pm_ops;
  * @post_nvm_auth: hook to run after Thunderbolt 3 NVM authentication
  * @request_ring_irq: NHI specific interrupt retrieval hook
  * @release_ring_irq: NHI specific interrupt release hook
+ * @ring_interrupt_active: NHI specific hook to activate/deactivate the
+ *			   interrupt of a single ring. If not set the
+ *			   standard USB4 NHI registers are used.
  * @is_present: Whether the device is currently present on the parent bus
  * @init_interrupts: NHI specific interrupt initialization hook
  * @reset_interface: Resets the host interface
@@ -67,6 +70,7 @@ struct tb_nhi_ops {
 	void (*post_nvm_auth)(struct tb_nhi *nhi);
 	int (*request_ring_irq)(struct tb_ring *ring, bool no_suspend);
 	void (*release_ring_irq)(struct tb_ring *ring);
+	void (*ring_interrupt_active)(struct tb_ring *ring, bool active);
 	bool (*is_present)(struct tb_nhi *nhi);
 	int (*init_interrupts)(struct tb_nhi *nhi);
 	void (*reset_interface)(struct tb_nhi *nhi);

-- 
2.55.0