[PATCH v7 00/11] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase

[PATCH v7 00/11] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase

[Colin Huang via B4 Relay]

This series refactors the Anacapa BMC devicetree layout to better support
development-phase hardware revisions (EVT1/EVT2/DVT) while keeping a platform
entrypoint.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
Changes in v7:
- Fix [Critical] Devicetree ABI breakage due to removal of generic compatible string
  keep to use compatible string "facebook,anacapa-bmc".
- Fix [Low] Redundant redefinition of inherited properties in the `evt2.dts` file.
- Fix [Low] Included devicetrees use `.dts` extension instead of `.dtsi`
  aspeed-bmc-facebook-anacapa-evt1.dts -> aspeed-bmc-facebook-anacapa-evt1.dtsi
  aspeed-bmc-facebook-anacapa-evt2.dts -> aspeed-bmc-facebook-anacapa-evt2.dtsi
  aspeed-bmc-facebook-anacapa-dvt.dts -> aspeed-bmc-facebook-anacapa-dvt.dtsi
- Link to v6: https://lore.kernel.org/r/20260825-anacapa-devlop-phase-devicetree-v6-0-9059a2a279ce@gmail.com

Changes in v6:
- Fold the following fixes into this series: 
   - Remove redundant vhub pinctrl-names
   - Use default SPI2 memory mapping
   - Fix dt-check-style strict violations
- Move p3v3_bmc_aux node from evt1.dts to evt2.dts for dt-check-style
- Fix the patch author information
- Link to v5: https://lore.kernel.org/r/20260813-anacapa-devlop-phase-devicetree-v5-0-c7058f63dc67@gmail.com

Changes in v5:
- Remove redundant vhub pinctrl-names
- Use default SPI2 memory mapping
- Fix dt-check-style strict violations
- Add Acked-by from Conor Dooley
- Sort compatible strings in alphabetical order
- More commit message for ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it.
- Update commit message to describe both LPDB and RPDB GPIO expanders  
- Link to v4: https://lore.kernel.org/r/20260805-anacapa-devlop-phase-devicetree-v4-0-5d67e0efa6c5@gmail.com

Changes in v4:
- Capitalize the first word of the short description.
- Rework the Anacapa development-phase devicetree hierarchy.
- Ensure that anacapa-evt1 generates an identical devicetree to the existing aspeed-bmc-facebook-anacapa.dts.
- Add SPI flash VCC supply.
- Simplify leakage GPIO line names.
- Add LPDB fuse monitor GPIO expander.
- Link to v3: https://lore.kernel.org/r/20260602-anacapa-devlop-phase-devicetree-v3-0-7c93c5df8d9b@gmail.com

Changes in v3:
- Restructure the EVT2 devicetree to inherit from the EVT1 devicetree, making it incremental rather than standalone.
- Add the DVT devicetree, inheriting from the EVT2 devicetree.
- Enable MCTP and FRU support for the NIC.
- Align PDB fan GPIO numbering.
- Add an EEPROM device node for the NFC adaptor board.
- Add an additional EEPROM device node for the SCM.
- Add shunt resistor values for HSC monitors
- Link to v2: https://lore.kernel.org/r/20260409-anacapa-devlop-phase-devicetree-v2-0-68f328671653@gmail.com

Changes in v2:
- Fix dtbs_check fail.
  Validated by following command:
    make dt_binding_check DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt1.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt2.dtb
- Link to v1: https://lore.kernel.org/r/20260407-anacapa-devlop-phase-devicetree-v1-0-97b96367cac3@gmail.com

---
Andy Chung (1):
      ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC

Carl Lee (1):
      ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board

Colin Huang (4):
      ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
      ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
      ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2
      ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM

Peter Shen (1):
      ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors

Rex Fu (4):
      ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering
      ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander
      ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names
      ARM: dts: aspeed: anacapa: Add SPI flash VCC supply

 .../aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi    |  260 +++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi   | 1131 ++++++++++++++++++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi   |  408 +++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     | 1078 +------------------
 4 files changed, 1800 insertions(+), 1077 deletions(-)
---
base-commit: cd7d1ef7d74ed5f5a1790a40389bc38382924556
change-id: 20260407-anacapa-devlop-phase-devicetree-4101d3f312c0

Best regards,
-- 
Colin Huang <u8813345@gmail.com>

[PATCH v7 01/11] ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it

[Colin Huang via B4 Relay]

From: Colin Huang <u8813345@gmail.com>

This commit introduces an EVT1 development-phase devicetree for the
Facebook Anacapa BMC. It updates the top-level wrapper DTS to include
the EVT1 hardware revision file.
 
A dedicated EVT1 DTS is added as the base revision for subsequent
board variants. The EVT1 devicetree is derived from the original
Anacapa devicetree and incorporates several cleanups and fixes:

  - Remove redundant vhub pinctrl-names
  - Use default SPI2 memory mapping
  - Fix dt-check-style strict violations
    Remove p3v3_bmc_aux lable to fix '[unused-lable]' warning.
 
The top-level aspeed-bmc-facebook-anacapa.dts now includes the EVT1
devicetree, allowing EVT2 and DVT revisions to inherit from a common
baseline while preserving a single build target for Anacapa.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi   | 1128 ++++++++++++++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     | 1078 +------------------
 2 files changed, 1129 insertions(+), 1077 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
new file mode 100644
index 000000000000..017700920cb1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
@@ -0,0 +1,1128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	compatible = "facebook,anacapa", "aspeed,ast2600";
+	model = "Facebook Anacapa BMC";
+
+	aliases {
+		i2c16 = &i2c0mux0ch0;
+		i2c17 = &i2c0mux0ch1;
+		i2c18 = &i2c0mux0ch2;
+		i2c19 = &i2c0mux0ch3;
+		i2c20 = &i2c1mux0ch0;
+		i2c21 = &i2c1mux0ch1;
+		i2c22 = &i2c1mux0ch2;
+		i2c23 = &i2c1mux0ch3;
+		i2c24 = &i2c4mux0ch0;
+		i2c25 = &i2c4mux0ch1;
+		i2c26 = &i2c4mux0ch2;
+		i2c27 = &i2c4mux0ch3;
+		i2c28 = &i2c4mux0ch4;
+		i2c29 = &i2c4mux0ch5;
+		i2c30 = &i2c4mux0ch6;
+		i2c31 = &i2c4mux0ch7;
+		i2c32 = &i2c8mux0ch0;
+		i2c33 = &i2c8mux0ch1;
+		i2c34 = &i2c8mux0ch2;
+		i2c35 = &i2c8mux0ch3;
+		i2c36 = &i2c10mux0ch0;
+		i2c37 = &i2c10mux0ch1;
+		i2c38 = &i2c10mux0ch2;
+		i2c39 = &i2c10mux0ch3;
+		i2c40 = &i2c10mux0ch4;
+		i2c41 = &i2c10mux0ch5;
+		i2c42 = &i2c10mux0ch6;
+		i2c43 = &i2c10mux0ch7;
+		i2c44 = &i2c11mux0ch0;
+		i2c45 = &i2c11mux0ch1;
+		i2c46 = &i2c11mux0ch2;
+		i2c47 = &i2c11mux0ch3;
+		i2c48 = &i2c11mux0ch4;
+		i2c49 = &i2c11mux0ch5;
+		i2c50 = &i2c11mux0ch6;
+		i2c51 = &i2c11mux0ch7;
+		i2c52 = &i2c13mux0ch0;
+		i2c53 = &i2c13mux0ch1;
+		i2c54 = &i2c13mux0ch2;
+		i2c55 = &i2c13mux0ch3;
+		i2c56 = &i2c13mux0ch4;
+		i2c57 = &i2c13mux0ch5;
+		i2c58 = &i2c13mux0ch6;
+		i2c59 = &i2c13mux0ch7;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			label = "bmc_heartbeat_amber";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+			label = "fp_id_amber";
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+		device_type = "memory";
+	};
+
+	regulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "p3v3_bmc_aux";
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gfx_memory: framebuffer {
+			compatible = "shared-dma-pool";
+			alignment = <0x01000000>;
+			reusable;
+			size = <0x01000000>;
+		};
+
+		video_engine_memory: video {
+			compatible = "shared-dma-pool";
+			alignment = <0x00100000>;
+			reusable;
+			size = <0x02c00000>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		#size-cells = <0>;
+
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			reg = <0>;
+			spi-max-frequency = <33000000>;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		    &pinctrl_adc2_default &pinctrl_adc3_default
+		    &pinctrl_adc4_default &pinctrl_adc5_default
+		    &pinctrl_adc6_default &pinctrl_adc7_default>;
+	pinctrl-names = "default";
+	aspeed,int-vref-microvolt = <2500000>;
+
+	status = "okay";
+};
+
+&adc1 {
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	pinctrl-names = "default";
+	aspeed,int-vref-microvolt = <2500000>;
+
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		status = "okay";
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		status = "okay";
+	};
+};
+
+&gfx {
+	memory-region = <&gfx_memory>;
+
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+
+	/*A0-A7*/
+	"","","","","","","","",
+
+	/*B0-B7*/
+	"BATTERY_DETECT", "", "", "BMC_READY",
+	"", "FM_ID_LED", "", "",
+
+	/*C0-C7*/
+	"","","","","","","","",
+
+	/*D0-D7*/
+	"","","","","","","","",
+
+	/*E0-E7*/
+	"","","","","","","","",
+
+	/*F0-F7*/
+	"","","","","","","","",
+
+	/*G0-G7*/
+	"FM_MUX1_SEL", "", "", "",
+	"", "", "FM_DEBUG_PORT_PRSNT_N", "FM_BMC_DBP_PRESENT_N",
+
+	/*H0-H7*/
+	"","","","","","","","",
+
+	/*I0-I7*/
+	"", "", "", "",
+	"", "FLASH_WP_STATUS", "BMC_JTAG_MUX_SEL", "",
+
+	/*J0-J7*/
+	"","","","","","","","",
+
+	/*K0-K7*/
+	"","","","","","","","",
+
+	/*L0-L7*/
+	"","","","","","","","",
+
+	/*M0-M7*/
+	"", "BMC_FRU_WP", "", "",
+	"", "", "", "",
+
+	/*N0-N7*/
+	"LED_POSTCODE_0", "LED_POSTCODE_1", "LED_POSTCODE_2", "LED_POSTCODE_3",
+	"LED_POSTCODE_4", "LED_POSTCODE_5", "LED_POSTCODE_6", "LED_POSTCODE_7",
+
+	/*O0-O7*/
+	"","","","","","","","",
+
+	/*P0-P7*/
+	"PWR_BTN_BMC_BUF_N", "", "ID_RST_BTN_BMC_N", "",
+	"PWR_LED", "", "", "BMC_HEARTBEAT_N",
+
+	/*Q0-Q7*/
+	"","","","","","","","",
+
+	/*R0-R7*/
+	"","","","","","","","",
+
+	/*S0-S7*/
+	"", "", "SYS_BMC_PWRBTN_N", "",
+	"", "", "", "RUN_POWER_FAULT",
+
+	/*T0-T7*/
+	"","","","","","","","",
+
+	/*U0-U7*/
+	"","","","","","","","",
+
+	/*V0-V7*/
+	"","","","","","","","",
+
+	/*W0-W7*/
+	"","","","","","","","",
+
+	/*X0-X7*/
+	"","","","","","","","",
+
+	/*Y0-Y7*/
+	"","","","","","","","",
+
+	/*Z0-Z7*/
+	"SPI_BMC_TPM_CS2_N", "", "", "SPI_BMC_TPM_CLK",
+	"SPI_BMC_TPM_MOSI", "SPI_BMC_TPM_MISO", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/
+	"","","","","","","","",
+
+	/*18B0-18B7*/
+	"","","","",
+	"FM_BOARD_BMC_REV_ID0", "FM_BOARD_BMC_REV_ID1",
+	"FM_BOARD_BMC_REV_ID2", "",
+
+	/*18C0-18C7*/
+	"","","","","","","","",
+
+	/*18D0-18D7*/
+	"","","","","","","","",
+
+	/*18E0-18E3*/
+	"FM_BMC_PROT_LS_EN", "AC_PWR_BMC_BTN_N", "", "";
+};
+
+// L Bridge Board
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c2048";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c0mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// R Bridge Board
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c2048";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c1mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// MB - E1.S
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c4mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// AMC
+&i2c5 {
+	status = "okay";
+};
+
+// MB
+&i2c6 {
+	status = "okay";
+
+	// HPM FRU
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+// SCM
+&i2c7 {
+	status = "okay";
+};
+
+// MB - PDB
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c8mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TEMP75_U8_ALERT_R_N",
+					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
+					"RPDB_FAN_CT_FAN_FAIL_R_N", "",
+					"", "",
+					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
+					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
+					"RPDB_I2C_P12V_MB_VRM_ALERT_R_N",
+					"RPDB_I2C_P12V_STBY_VRM_ALERT_R_N",
+					"RPDB_PGD_P3V3_STBY_PWRGD_R",
+					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9555";
+				reg = <0x24>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
+					"RPDB_PWRGD_P50V_HSC4_SYS_R",
+					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
+					"RPDB_P50V_FAN1_R2_PG", "RPDB_P50V_FAN2_R2_PG",
+					"RPDB_P50V_FAN3_R2_PG", "RPDB_P50V_FAN4_R2_PG",
+					"", "RPDB_FAN1_PRSNT_N_R",
+					"", "RPDB_FAN2_PRSNT_N_R",
+					"RPDB_FAN3_PRSNT_N_R", "RPDB_FAN4_PRSNT_N_R",
+					"", "";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			// R-PDB FRU
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+		};
+
+		i2c8mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"LPDB_FAN_FULL_SPEED_R_N","LPDB_I2C_TEMP75_U8_ALERT_R_N",
+					"LPDB_I2C_TMP432_U29_ALERT_R_N","LPDB_GLOBAL_WP",
+					"LPDB_FAN_CT_FAN_FAIL_R_N","",
+					"","",
+					"LPDB_ALERT_P50V_HSC0_R_N","LPDB_ALERT_P50V_HSC1_R_N",
+					"LPDB_ALERT_P50V_HSC5_R_N","LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
+					"LPDB_EAM0_PRSNT_MOS_N_R","LPDB_EAM1_PRSNT_MOS_N_R",
+					"LPDB_PWRGD_P50V_HSC5_SYS_R","";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9555";
+				reg = <0x24>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"LPDB_P50V_FAN1_R2_PG","LPDB_P50V_FAN2_R2_PG",
+					"LPDB_P50V_FAN3_R2_PG","LPDB_P50V_FAN4_R2_PG",
+					"LPDB_P50V_FAN5_R2_PG","LPDB_FAN1_PRSNT_N_R",
+					"LPDB_FAN2_PRSNT_N_R","LPDB_FAN3_PRSNT_N_R",
+					"LPDB_FAN4_PRSNT_N_R","LPDB_FAN5_PRSNT_N_R",
+					"","",
+					"","",
+					"","";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			// L-PDB FRU
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+		};
+
+		i2c8mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c8mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// SCM
+&i2c9 {
+	status = "okay";
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+// R Bridge Board
+&i2c10 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c10mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"","",
+					"","RBB_CPLD_REFRESH_IN_PRGRS_R_L",
+					"RBB_EAM0_NIC_CBL_PRSNT_R_L","RBB_EAM1_NIC_CBL_PRSNT_R_L",
+					"RBB_AINIC_JTAG_MUX_R2_SEL","RBB_SPI_MUX0_R2_SEL",
+					"RBB_AINIC_PRSNT_R_L","RBB_AINIC_OE_R_N",
+					"RBB_AINIC_BOARD_R2_ID","RBB_RST_USB2_HUB_R_N",
+					"RBB_RST_FT4222_R_N","RBB_RST_MCP2210_R_N",
+					"","";
+			};
+
+			// R Bridge Board FRU
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c10mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// L Bridge Board
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c11mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"","",
+					"","LBB_CPLD_REFRESH_IN_PRGRS_R_L",
+					"LBB_EAM0_NIC_CBL_PRSNT_R_L","LBB_EAM1_NIC_CBL_PRSNT_R_L",
+					"LBB_AINIC_JTAG_MUX_R2_SEL","LBB_SPI_MUX0_R2_SEL",
+					"LBB_AINIC_PRSNT_R_L","LBB_AINIC_OE_R_N",
+					"LBB_AINIC_BOARD_R2_ID","LBB_RST_USB2_HUB_R_N",
+					"LBB_RST_FT4222_R_N","LBB_RST_MCP2210_R_N",
+					"","";
+			};
+
+			// L Bridge Board FRU
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c11mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// Debug Card
+&i2c12 {
+	status = "okay";
+};
+
+// MB
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c13mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+		};
+
+		i2c13mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// HPM BRD ID FRU
+			eeprom@51 {
+				compatible = "atmel,24c256";
+				reg = <0x51>;
+			};
+		};
+
+		i2c13mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			nfc@28 {
+				compatible = "nxp,nxp-nci-i2c";
+				reg = <0x28>;
+
+				enable-gpios = <&sgpiom0 241 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <156 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
+// SCM
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	pinctrl-names = "default";
+	use-ncsi;
+
+	status = "okay";
+};
+
+&sgpiom0 {
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/* A0-A7 line 0-15 */
+	"", "FM_CPU0_SYS_RESET_N", "", "CPU0_KBRST_N",
+	"", "FM_CPU0_PROCHOT_trigger_N", "", "FM_CLR_CMOS_R_P0",
+	"", "Force_I3C_SEL", "", "SYSTEM_Force_Run_AC_Cycle",
+	"", "", "", "",
+
+	/* B0-B7 line 16-31 */
+	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel3_leakage", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage_Manifold2", "",
+	"Channel5_leakage_EAM1", "",
+	"Channel6_leakage_CPU_DIMM", "",
+	"Channel7_leakage_EAM2", "",
+
+	/* C0-C7 line 32-47 */
+	"RSVD_RMC_GPIO3", "", "", "",
+	"", "", "", "",
+	"LEAK_DETECT_RMC_N", "JTAG_CPLD_TRST_R_N", "", "",
+	"", "", "", "",
+
+	/* D0-D7 line 48-63 */
+	"PWRGD_PDB_EAMHSC0_CPLD_PG_R", "",
+	"PWRGD_PDB_EAMHSC1_CPLD_PG_R", "",
+	"PWRGD_PDB_EAMHSC2_CPLD_PG_R", "",
+	"PWRGD_PDB_EAMHSC3_CPLD_PG_R", "",
+	"AMC_BRD_PRSNT_CPLD_L", "", "", "",
+	"", "", "", "",
+
+	/* E0-E7 line 64-79 */
+	"AMC_PDB_EAMHSC0_CPLD_EN_R", "",
+	"AMC_PDB_EAMHSC1_CPLD_EN_R", "",
+	"AMC_PDB_EAMHSC2_CPLD_EN_R", "",
+	"AMC_PDB_EAMHSC3_CPLD_EN_R", "",
+	"", "", "", "",
+	"", "", "", "",
+
+	/* F0-F7 line 80-95 */
+	"PWRGD_PVDDCR_CPU1_P0", "SGPIO_READY",
+	"PWRGD_PVDDCR_CPU0_P0", "",
+	"", "", "", "",
+	"", "", "", "",
+
+	/* G0-G7 line 96-111 */
+	"L_PRSNT_EDSFF0_N", "",
+	"L_PRSNT_EDSFF1_N", "",
+	"R_PRSNT_EDSFF2_N", "",
+	"R_PRSNT_EDSFF3_N", "",
+	"HPM_EDSFF_PG", "",
+	"PWRGD_CHEH_CPU0_FPGA", "",
+	"PWRGD_CHAD_CPU0_FPGA", "FM_BMC_READY_PLD",
+	"", "",
+
+	/* H0-H7 line 112-127 */
+	"PWRGD_P3V3", "",
+	"P12V_DDR_IP_PWRGD_R", "",
+	"P12V_DDR_AH_PWRGD_R", "",
+	"PWRGD_P12V_VRM1_CPLD_PG_R", "",
+	"PWRGD_P12V_VRM0_CPLD_PG_R", "",
+	"PWRGD_PDB_HSC4_CPLD_PG_R", "",
+	"PWRGD_PVDD18_S5_P0_PG", "",
+	"PWRGD_PVDD33_S5_P0_PG", "",
+
+	/* I0-I7 line 128-143 */
+	"EAM0_BRD_PRSNT_R_L", "",
+	"EAM1_BRD_PRSNT_R_L", "",
+	"EAM2_BRD_PRSNT_R_L", "",
+	"EAM3_BRD_PRSNT_R_L", "",
+	"EAM0_CPU_MOD_PWR_GD_R", "",
+	"EAM1_CPU_MOD_PWR_GD_R", "",
+	"PRSNT_EDSFF_BOOT_N", "",
+	"EAM3_CPU_MOD_PWR_GD_R", "",
+
+	/* J0-J7 line 144-159 */
+	"PRSNT_L_BIRDGE_R", "",
+	"PRSNT_R_BIRDGE_R", "",
+	"BRIDGE_L_MAIN_PG_R", "",
+	"BRIDGE_R_MAIN_PG_R", "",
+	"BRIDGE_L_STBY_PG_R", "",
+	"BRIDGE_R_STBY_PG_R", "",
+	"", "", "", "",
+
+	/* K0-K7 line 160-175 */
+	"ADC_I2C_ALERT_N", "",
+	"TEMP_I2C_ALERT_R_L", "",
+	"CPU0_VR_SMB_ALERT_CPLD_N", "",
+	"COVER_INTRUDER_R_N", "",
+	"HANDLE_INTRUDER_CPLD_N", "",
+	"IRQ_MCIO_CPLD_WAKE_R_N", "",
+	"APML_CPU0_ALERT_R_N", "",
+	"PDB_ALERT_R_N", "",
+
+	/* L0-L7 line 176-191 */
+	"L_EDSFF0_PG", "", "L_EDSFF1_PG", "",
+	"R_EDSFF2_PG", "", "R_EDSFF3_PG", "",
+	"CPU0_CORETYPE0", "", "CPU0_CORETYPE1", "",
+	"CPU0_CORETYPE2", "", "FM_BIOS_POST_CMPLT_R_N", "",
+
+	/* M0-M7 line 192-207 */
+	"EAM0_SMERR_CPLD_R_L", "",
+	"EAM1_SMERR_CPLD_R_L", "",
+	"EAM2_SMERR_CPLD_R_L", "",
+	"EAM3_SMERR_CPLD_R_L", "",
+	"CPU0_SMERR_N_R", "",
+	"CPU0_NV_SAVE_N_R", "",
+	"PDB_PWR_LOSS_CPLD_N", "",
+	"IRQ_BMC_SMI_ACTIVE_R_N", "",
+
+	/* N0-N7 line 208-223 */
+	"AMCROT_BMC_S5_RDY_R", "",
+	"AMC_RDY_R", "",
+	"AMC_STBY_PGOOD_R", "",
+	"CPU_AMC_SLP_S5_R_L", "",
+	"AMC_CPU_EAMPG_R", "",
+	"", "", "", "",
+
+	/* O0-O7 line 224-239 */
+	"HPM_PWR_FAIL", "Port80_b0",
+	"FM_DIMM_IP_FAIL", "Port80_b1",
+	"FM_DIMM_AH_FAIL", "Port80_b2",
+	"AMC_THERMTRIP_ASSERT", "Port80_b3",
+	"CPU_THERMTRIP_ASSERT", "Port80_b4",
+	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
+	"CPLD_SGPIO_RDY", "Port80_b6",
+	"", "Port80_b7",
+
+	/* P0-P7 line 240-255 */
+	"CPU0_SLP_S5_N_R", "NFC_VEN",
+	"CPU0_SLP_S3_N_R", "",
+	"FM_CPU0_PWRGD", "",
+	"PWRGD_RMC", "",
+	"FM_RST_CPU0_RESET_N", "",
+	"FM_PWRGD_CPU0_PWROK", "",
+	"wS5_PWR_Ready", "",
+	"wS0_ON_N", "PWRGD_P1V0_AUX";
+
+	ngpios = <128>;
+
+	status = "okay";
+};
+
+// BIOS Flash
+&spi2 {
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+
+		status = "okay";
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	memory-region = <&video_engine_memory>;
+
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	pinctrl-names = "default";
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	aspeed,ext-push-pull;
+	aspeed,external-signal;
+	aspeed,reset-type = "soc";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 1fddf3a5d138..724f4d312de4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -1,1079 +1,3 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-/dts-v1/;
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-
-/ {
-	model = "Facebook Anacapa BMC";
-	compatible = "facebook,anacapa-bmc", "aspeed,ast2600";
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		i2c16 = &i2c0mux0ch0;
-		i2c17 = &i2c0mux0ch1;
-		i2c18 = &i2c0mux0ch2;
-		i2c19 = &i2c0mux0ch3;
-		i2c20 = &i2c1mux0ch0;
-		i2c21 = &i2c1mux0ch1;
-		i2c22 = &i2c1mux0ch2;
-		i2c23 = &i2c1mux0ch3;
-		i2c24 = &i2c4mux0ch0;
-		i2c25 = &i2c4mux0ch1;
-		i2c26 = &i2c4mux0ch2;
-		i2c27 = &i2c4mux0ch3;
-		i2c28 = &i2c4mux0ch4;
-		i2c29 = &i2c4mux0ch5;
-		i2c30 = &i2c4mux0ch6;
-		i2c31 = &i2c4mux0ch7;
-		i2c32 = &i2c8mux0ch0;
-		i2c33 = &i2c8mux0ch1;
-		i2c34 = &i2c8mux0ch2;
-		i2c35 = &i2c8mux0ch3;
-		i2c36 = &i2c10mux0ch0;
-		i2c37 = &i2c10mux0ch1;
-		i2c38 = &i2c10mux0ch2;
-		i2c39 = &i2c10mux0ch3;
-		i2c40 = &i2c10mux0ch4;
-		i2c41 = &i2c10mux0ch5;
-		i2c42 = &i2c10mux0ch6;
-		i2c43 = &i2c10mux0ch7;
-		i2c44 = &i2c11mux0ch0;
-		i2c45 = &i2c11mux0ch1;
-		i2c46 = &i2c11mux0ch2;
-		i2c47 = &i2c11mux0ch3;
-		i2c48 = &i2c11mux0ch4;
-		i2c49 = &i2c11mux0ch5;
-		i2c50 = &i2c11mux0ch6;
-		i2c51 = &i2c11mux0ch7;
-		i2c52 = &i2c13mux0ch0;
-		i2c53 = &i2c13mux0ch1;
-		i2c54 = &i2c13mux0ch2;
-		i2c55 = &i2c13mux0ch3;
-		i2c56 = &i2c13mux0ch4;
-		i2c57 = &i2c13mux0ch5;
-		i2c58 = &i2c13mux0ch6;
-		i2c59 = &i2c13mux0ch7;
-	};
-
-	chosen {
-		stdout-path = "serial4:57600n8";
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
-				  <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
-				  <&adc1 2>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			label = "bmc_heartbeat_amber";
-			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-1 {
-			label = "fp_id_amber";
-			default-state = "off";
-			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		video_engine_memory: video {
-			size = <0x02c00000>;
-			alignment = <0x00100000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
-		compatible = "regulator-fixed";
-		regulator-name = "p3v3_bmc_aux";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	spi_gpio: spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		status = "okay";
-
-		tpm@0 {
-			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
-			spi-max-frequency = <33000000>;
-			reg = <0>;
-		};
-	};
-};
-
-&adc0 {
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-		&pinctrl_adc2_default &pinctrl_adc3_default
-		&pinctrl_adc4_default &pinctrl_adc5_default
-		&pinctrl_adc6_default &pinctrl_adc7_default>;
-	status = "okay";
-};
-
-&adc1 {
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc10_default>;
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&gpio0 {
-	gpio-line-names =
-
-	/*A0-A7*/
-	"","","","","","","","",
-
-	/*B0-B7*/
-	"BATTERY_DETECT", "", "", "BMC_READY",
-	"", "FM_ID_LED", "", "",
-
-	/*C0-C7*/
-	"","","","","","","","",
-
-	/*D0-D7*/
-	"","","","","","","","",
-
-	/*E0-E7*/
-	"","","","","","","","",
-
-	/*F0-F7*/
-	"","","","","","","","",
-
-	/*G0-G7*/
-	"FM_MUX1_SEL", "", "", "",
-	"", "", "FM_DEBUG_PORT_PRSNT_N", "FM_BMC_DBP_PRESENT_N",
-
-	/*H0-H7*/
-	"","","","","","","","",
-
-	/*I0-I7*/
-	"", "", "", "",
-	"", "FLASH_WP_STATUS", "BMC_JTAG_MUX_SEL", "",
-
-	/*J0-J7*/
-	"","","","","","","","",
-
-	/*K0-K7*/
-	"","","","","","","","",
-
-	/*L0-L7*/
-	"","","","","","","","",
-
-	/*M0-M7*/
-	"", "BMC_FRU_WP", "", "",
-	"", "", "", "",
-
-	/*N0-N7*/
-	"LED_POSTCODE_0", "LED_POSTCODE_1", "LED_POSTCODE_2", "LED_POSTCODE_3",
-	"LED_POSTCODE_4", "LED_POSTCODE_5", "LED_POSTCODE_6", "LED_POSTCODE_7",
-
-	/*O0-O7*/
-	"","","","","","","","",
-
-	/*P0-P7*/
-	"PWR_BTN_BMC_BUF_N", "", "ID_RST_BTN_BMC_N", "",
-	"PWR_LED", "", "", "BMC_HEARTBEAT_N",
-
-	/*Q0-Q7*/
-	"","","","","","","","",
-
-	/*R0-R7*/
-	"","","","","","","","",
-
-	/*S0-S7*/
-	"", "", "SYS_BMC_PWRBTN_N", "",
-	"", "", "", "RUN_POWER_FAULT",
-
-	/*T0-T7*/
-	"","","","","","","","",
-
-	/*U0-U7*/
-	"","","","","","","","",
-
-	/*V0-V7*/
-	"","","","","","","","",
-
-	/*W0-W7*/
-	"","","","","","","","",
-
-	/*X0-X7*/
-	"","","","","","","","",
-
-	/*Y0-Y7*/
-	"","","","","","","","",
-
-	/*Z0-Z7*/
-	"SPI_BMC_TPM_CS2_N", "", "", "SPI_BMC_TPM_CLK",
-	"SPI_BMC_TPM_MOSI", "SPI_BMC_TPM_MISO", "", "";
-};
-
-&gpio1 {
-	gpio-line-names =
-	/*18A0-18A7*/
-	"","","","","","","","",
-
-	/*18B0-18B7*/
-	"","","","",
-	"FM_BOARD_BMC_REV_ID0", "FM_BOARD_BMC_REV_ID1",
-	"FM_BOARD_BMC_REV_ID2", "",
-
-	/*18C0-18C7*/
-	"","","","","","","","",
-
-	/*18D0-18D7*/
-	"","","","","","","","",
-
-	/*18E0-18E3*/
-	"FM_BMC_PROT_LS_EN", "AC_PWR_BMC_BTN_N", "", "";
-};
-
-// L Bridge Board
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c2048";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c0mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c0mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c0mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c0mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// R Bridge Board
-&i2c1 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c2048";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c1mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c1mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c1mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c1mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// MB - E1.S
-&i2c4 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c4mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// AMC
-&i2c5 {
-	status = "okay";
-};
-
-// MB
-&i2c6 {
-	status = "okay";
-
-	// HPM FRU
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-};
-
-// SCM
-&i2c7 {
-	status = "okay";
-
-
-};
-
-// MB - PDB
-&i2c8 {
-	status = "okay";
-
-	i2c-mux@72 {
-		compatible = "nxp,pca9546";
-		reg = <0x72>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c8mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			adc@1f {
-				compatible = "ti,adc128d818";
-				reg = <0x1f>;
-				ti,mode = /bits/ 8 <1>;
-			};
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TEMP75_U8_ALERT_R_N",
-					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
-					"RPDB_FAN_CT_FAN_FAIL_R_N", "",
-					"", "",
-					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
-					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
-					"RPDB_I2C_P12V_MB_VRM_ALERT_R_N",
-					"RPDB_I2C_P12V_STBY_VRM_ALERT_R_N",
-					"RPDB_PGD_P3V3_STBY_PWRGD_R",
-					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
-			};
-
-			gpio@24 {
-				compatible = "nxp,pca9555";
-				reg = <0x24>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
-					"RPDB_PWRGD_P50V_HSC4_SYS_R",
-					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
-					"RPDB_P50V_FAN1_R2_PG", "RPDB_P50V_FAN2_R2_PG",
-					"RPDB_P50V_FAN3_R2_PG", "RPDB_P50V_FAN4_R2_PG",
-					"", "RPDB_FAN1_PRSNT_N_R",
-					"", "RPDB_FAN2_PRSNT_N_R",
-					"RPDB_FAN3_PRSNT_N_R", "RPDB_FAN4_PRSNT_N_R",
-					"", "";
-			};
-
-			// R-PDB FRU
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-		i2c8mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"LPDB_FAN_FULL_SPEED_R_N","LPDB_I2C_TEMP75_U8_ALERT_R_N",
-					"LPDB_I2C_TMP432_U29_ALERT_R_N","LPDB_GLOBAL_WP",
-					"LPDB_FAN_CT_FAN_FAIL_R_N","",
-					"","",
-					"LPDB_ALERT_P50V_HSC0_R_N","LPDB_ALERT_P50V_HSC1_R_N",
-					"LPDB_ALERT_P50V_HSC5_R_N","LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
-					"LPDB_EAM0_PRSNT_MOS_N_R","LPDB_EAM1_PRSNT_MOS_N_R",
-					"LPDB_PWRGD_P50V_HSC5_SYS_R","";
-			};
-
-			gpio@24 {
-				compatible = "nxp,pca9555";
-				reg = <0x24>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"LPDB_P50V_FAN1_R2_PG","LPDB_P50V_FAN2_R2_PG",
-					"LPDB_P50V_FAN3_R2_PG","LPDB_P50V_FAN4_R2_PG",
-					"LPDB_P50V_FAN5_R2_PG","LPDB_FAN1_PRSNT_N_R",
-					"LPDB_FAN2_PRSNT_N_R","LPDB_FAN3_PRSNT_N_R",
-					"LPDB_FAN4_PRSNT_N_R","LPDB_FAN5_PRSNT_N_R",
-					"","",
-					"","",
-					"","";
-			};
-
-			// L-PDB FRU
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-		i2c8mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c8mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// SCM
-&i2c9 {
-	status = "okay";
-
-	// SCM FRU
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	// BSM FRU
-	eeprom@56 {
-		compatible = "atmel,24c64";
-		reg = <0x56>;
-	};
-};
-
-// R Bridge Board
-&i2c10 {
-	status = "okay";
-
-	i2c-mux@71 {
-		compatible = "nxp,pca9548";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c10mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				gpio-line-names =
-					"","",
-					"","RBB_CPLD_REFRESH_IN_PRGRS_R_L",
-					"RBB_EAM0_NIC_CBL_PRSNT_R_L","RBB_EAM1_NIC_CBL_PRSNT_R_L",
-					"RBB_AINIC_JTAG_MUX_R2_SEL","RBB_SPI_MUX0_R2_SEL",
-					"RBB_AINIC_PRSNT_R_L","RBB_AINIC_OE_R_N",
-					"RBB_AINIC_BOARD_R2_ID","RBB_RST_USB2_HUB_R_N",
-					"RBB_RST_FT4222_R_N","RBB_RST_MCP2210_R_N",
-					"","";
-			};
-
-			// R Bridge Board FRU
-			eeprom@52 {
-				compatible = "atmel,24c256";
-				reg = <0x52>;
-			};
-		};
-		i2c10mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// L Bridge Board
-&i2c11 {
-	status = "okay";
-
-	i2c-mux@71 {
-		compatible = "nxp,pca9548";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c11mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				gpio-line-names =
-					"","",
-					"","LBB_CPLD_REFRESH_IN_PRGRS_R_L",
-					"LBB_EAM0_NIC_CBL_PRSNT_R_L","LBB_EAM1_NIC_CBL_PRSNT_R_L",
-					"LBB_AINIC_JTAG_MUX_R2_SEL","LBB_SPI_MUX0_R2_SEL",
-					"LBB_AINIC_PRSNT_R_L","LBB_AINIC_OE_R_N",
-					"LBB_AINIC_BOARD_R2_ID","LBB_RST_USB2_HUB_R_N",
-					"LBB_RST_FT4222_R_N","LBB_RST_MCP2210_R_N",
-					"","";
-			};
-
-			// L Bridge Board FRU
-			eeprom@52 {
-				compatible = "atmel,24c256";
-				reg = <0x52>;
-			};
-		};
-		i2c11mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// Debug Card
-&i2c12 {
-	status = "okay";
-};
-
-// MB
-&i2c13 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c13mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			adc@1f {
-				compatible = "ti,adc128d818";
-				reg = <0x1f>;
-				ti,mode = /bits/ 8 <1>;
-			};
-		};
-		i2c13mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			// HPM BRD ID FRU
-			eeprom@51 {
-				compatible = "atmel,24c256";
-				reg = <0x51>;
-			};
-		};
-		i2c13mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			nfc@28 {
-				compatible = "nxp,nxp-nci-i2c";
-				reg = <0x28>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <156 IRQ_TYPE_LEVEL_HIGH>;
-
-				enable-gpios = <&sgpiom0 241 GPIO_ACTIVE_HIGH>;
-			};
-		};
-	};
-};
-
-// SCM
-&i2c14 {
-	status = "okay";
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&kcs2 {
-	aspeed,lpc-io-reg = <0xca8>;
-	status = "okay";
-};
-
-&kcs3 {
-	aspeed,lpc-io-reg = <0xca2>;
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ncsi3_default>;
-	use-ncsi;
-};
-
-&sgpiom0 {
-	ngpios = <128>;
-	bus-frequency = <2000000>;
-	gpio-line-names =
-	/*in - out - in - out */
-	/* A0-A7 line 0-15 */
-	"", "FM_CPU0_SYS_RESET_N", "", "CPU0_KBRST_N",
-	"", "FM_CPU0_PROCHOT_trigger_N", "", "FM_CLR_CMOS_R_P0",
-	"", "Force_I3C_SEL", "", "SYSTEM_Force_Run_AC_Cycle",
-	"", "", "", "",
-
-	/* B0-B7 line 16-31 */
-	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
-	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
-	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
-	"Channel3_leakage", "FM_CPU0_NMI_SYNC_FLOOD_N",
-	"Channel4_leakage_Manifold2", "",
-	"Channel5_leakage_EAM1", "",
-	"Channel6_leakage_CPU_DIMM", "",
-	"Channel7_leakage_EAM2", "",
-
-	/* C0-C7 line 32-47 */
-	"RSVD_RMC_GPIO3", "", "", "",
-	"", "", "", "",
-	"LEAK_DETECT_RMC_N", "JTAG_CPLD_TRST_R_N", "", "",
-	"", "", "", "",
-
-	/* D0-D7 line 48-63 */
-	"PWRGD_PDB_EAMHSC0_CPLD_PG_R", "",
-	"PWRGD_PDB_EAMHSC1_CPLD_PG_R", "",
-	"PWRGD_PDB_EAMHSC2_CPLD_PG_R", "",
-	"PWRGD_PDB_EAMHSC3_CPLD_PG_R", "",
-	"AMC_BRD_PRSNT_CPLD_L", "", "", "",
-	"", "", "", "",
-
-	/* E0-E7 line 64-79 */
-	"AMC_PDB_EAMHSC0_CPLD_EN_R", "",
-	"AMC_PDB_EAMHSC1_CPLD_EN_R", "",
-	"AMC_PDB_EAMHSC2_CPLD_EN_R", "",
-	"AMC_PDB_EAMHSC3_CPLD_EN_R", "",
-	"", "", "", "",
-	"", "", "", "",
-
-	/* F0-F7 line 80-95 */
-	"PWRGD_PVDDCR_CPU1_P0", "SGPIO_READY",
-	"PWRGD_PVDDCR_CPU0_P0", "",
-	"", "", "", "",
-	"", "", "", "",
-
-	/* G0-G7 line 96-111 */
-	"L_PRSNT_EDSFF0_N", "",
-	"L_PRSNT_EDSFF1_N", "",
-	"R_PRSNT_EDSFF2_N", "",
-	"R_PRSNT_EDSFF3_N", "",
-	"HPM_EDSFF_PG", "",
-	"PWRGD_CHEH_CPU0_FPGA", "",
-	"PWRGD_CHAD_CPU0_FPGA", "FM_BMC_READY_PLD",
-	"", "",
-
-	/* H0-H7 line 112-127 */
-	"PWRGD_P3V3", "",
-	"P12V_DDR_IP_PWRGD_R", "",
-	"P12V_DDR_AH_PWRGD_R", "",
-	"PWRGD_P12V_VRM1_CPLD_PG_R", "",
-	"PWRGD_P12V_VRM0_CPLD_PG_R", "",
-	"PWRGD_PDB_HSC4_CPLD_PG_R", "",
-	"PWRGD_PVDD18_S5_P0_PG", "",
-	"PWRGD_PVDD33_S5_P0_PG", "",
-
-	/* I0-I7 line 128-143 */
-	"EAM0_BRD_PRSNT_R_L", "",
-	"EAM1_BRD_PRSNT_R_L", "",
-	"EAM2_BRD_PRSNT_R_L", "",
-	"EAM3_BRD_PRSNT_R_L", "",
-	"EAM0_CPU_MOD_PWR_GD_R", "",
-	"EAM1_CPU_MOD_PWR_GD_R", "",
-	"PRSNT_EDSFF_BOOT_N", "",
-	"EAM3_CPU_MOD_PWR_GD_R", "",
-
-	/* J0-J7 line 144-159 */
-	"PRSNT_L_BIRDGE_R", "",
-	"PRSNT_R_BIRDGE_R", "",
-	"BRIDGE_L_MAIN_PG_R", "",
-	"BRIDGE_R_MAIN_PG_R", "",
-	"BRIDGE_L_STBY_PG_R", "",
-	"BRIDGE_R_STBY_PG_R", "",
-	"", "", "", "",
-
-	/* K0-K7 line 160-175 */
-	"ADC_I2C_ALERT_N", "",
-	"TEMP_I2C_ALERT_R_L", "",
-	"CPU0_VR_SMB_ALERT_CPLD_N", "",
-	"COVER_INTRUDER_R_N", "",
-	"HANDLE_INTRUDER_CPLD_N", "",
-	"IRQ_MCIO_CPLD_WAKE_R_N", "",
-	"APML_CPU0_ALERT_R_N", "",
-	"PDB_ALERT_R_N", "",
-
-	/* L0-L7 line 176-191 */
-	"L_EDSFF0_PG", "", "L_EDSFF1_PG", "",
-	"R_EDSFF2_PG", "", "R_EDSFF3_PG", "",
-	"CPU0_CORETYPE0", "", "CPU0_CORETYPE1", "",
-	"CPU0_CORETYPE2", "", "FM_BIOS_POST_CMPLT_R_N", "",
-
-	/* M0-M7 line 192-207 */
-	"EAM0_SMERR_CPLD_R_L", "",
-	"EAM1_SMERR_CPLD_R_L", "",
-	"EAM2_SMERR_CPLD_R_L", "",
-	"EAM3_SMERR_CPLD_R_L", "",
-	"CPU0_SMERR_N_R", "",
-	"CPU0_NV_SAVE_N_R", "",
-	"PDB_PWR_LOSS_CPLD_N", "",
-	"IRQ_BMC_SMI_ACTIVE_R_N", "",
-
-	/* N0-N7 line 208-223 */
-	"AMCROT_BMC_S5_RDY_R", "",
-	"AMC_RDY_R", "",
-	"AMC_STBY_PGOOD_R", "",
-	"CPU_AMC_SLP_S5_R_L", "",
-	"AMC_CPU_EAMPG_R", "",
-	"", "", "", "",
-
-	/* O0-O7 line 224-239 */
-	"HPM_PWR_FAIL", "Port80_b0",
-	"FM_DIMM_IP_FAIL", "Port80_b1",
-	"FM_DIMM_AH_FAIL", "Port80_b2",
-	"AMC_THERMTRIP_ASSERT", "Port80_b3",
-	"CPU_THERMTRIP_ASSERT", "Port80_b4",
-	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
-	"CPLD_SGPIO_RDY", "Port80_b6",
-	"", "Port80_b7",
-
-	/* P0-P7 line 240-255 */
-	"CPU0_SLP_S5_N_R", "NFC_VEN",
-	"CPU0_SLP_S3_N_R", "",
-	"FM_CPU0_PWRGD", "",
-	"PWRGD_RMC", "",
-	"FM_RST_CPU0_RESET_N", "",
-	"FM_PWRGD_CPU0_PWROK", "",
-	"wS5_PWR_Ready", "",
-	"wS0_ON_N", "PWRGD_P1V0_AUX";
-	status = "okay";
-};
-
-// BIOS Flash
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2_default>;
-	status = "okay";
-	reg = <0x1e631000 0xc4>, <0x50000000 0x8000000>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		label = "pnor";
-		spi-max-frequency = <12000000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-		status = "okay";
-	};
-};
-
-// HOST BIOS Debug
-&uart1 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-// BMC Debug Console
-&uart5 {
-	status = "okay";
-};
-
-&uart_routing {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-	pinctrl-names = "default";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&wdt1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-	aspeed,reset-type = "soc";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-	aspeed,ext-pulse-duration = <256>;
-	status = "okay";
-};
+#include "aspeed-bmc-facebook-anacapa-evt1.dtsi"

-- 
2.34.1

[PATCH v7 02/11] ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1

[Colin Huang via B4 Relay]

From: Colin Huang <u8813345@gmail.com>

Add a development-phase devicetree for the Facebook Anacapa BMC EVT2
hardware revision and update the Anacapa wrapper DTS to reference
it.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi   | 168 +++++++++++++++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     |   2 +-
 2 files changed, 169 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
new file mode 100644
index 000000000000..be7f17ad5f8e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+#include "aspeed-bmc-facebook-anacapa-evt1.dtsi"
+
+&sgpiom0 {
+	gpio-line-names =
+	/*in - out */
+	/* A0-A7 line 0-15 */
+	"L_FNIC_FLT", "FM_CPU0_SYS_RESET_N",
+	"L_BNIC0_FLT", "CPU0_KBRST_N",
+	"L_BNIC1_FLT", "FM_CPU0_PROCHOT_trigger_N",
+	"L_BNIC2_FLT", "FM_CLR_CMOS_R_P0",
+	"L_BNIC3_FLT", "Force_I3C_SEL",
+	"L_RTM_SW_FLT", "SYSTEM_Force_Run_AC_Cycle",
+	"", "",
+	"", "",
+
+	/* B0-B7 line 16-31 */
+	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
+	"Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
+	"Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
+	"Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",
+
+	/* C0-C7 line 32-47 */
+	"RSVD_RMC_GPIO3", "RTM_MUX_L",
+	"LEAK_DETECT_RMC_N", "RTM_MUX_R",
+	"HDR_P0_NMI_BTN_BUF_R_N", "FPGA_JTAG_SCM_DBREQ_N",
+	"Channel6_leakage_present_CPU_DIMM", "whdt_sel",
+	"", "JTAG_CPLD_TRST_R_N",
+	"", "",
+	"", "",
+	"", "",
+
+	/* D0-D7 line 48-63 */
+	"Channel0_leakage_present_EAM3", "",
+	"Channel1_leakage_present_EAM0", "",
+	"Channel2_leakage_present_Manifold1", "",
+	"Channel4_leakage_present_Manifold2", "",
+	"AMC_BRD_PRSNT_CPLD_L", "",
+	"Channel7_leakage_present_EAM2", "",
+	"", "",
+	"", "",
+
+	/* E0-E7 line 64-79 */
+	"L_PRSNT_B_FENIC_R2_N", "",
+	"L_PRSNT_B_BENIC0_R2_N", "",
+	"L_PRSNT_B_BENIC1_R2_N", "",
+	"L_PRSNT_B_BENIC2_R2_N", "",
+	"L_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* F0-F7 line 80-95 */
+	"R_PRSNT_B_FENIC_R2_N", "SGPIO_READY",
+	"R_PRSNT_B_BENIC0_R2_N", "",
+	"R_PRSNT_B_BENIC1_R2_N", "",
+	"R_PRSNT_B_BENIC2_R2_N", "",
+	"R_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* G0-G7 line 96-111 */
+	"L_PRSNT_EDSFF0_N", "",
+	"L_PRSNT_EDSFF1_N", "",
+	"R_PRSNT_EDSFF2_N", "",
+	"R_PRSNT_EDSFF3_N", "",
+	"HPM_EDSFF_PG", "",
+	"", "",
+	"", "FM_BMC_READY_PLD",
+	"PRSNT_NFC_BOARD_R", "",
+
+	/* H0-H7 line 112-127 */
+	"R_FNIC_FLT", "",
+	"R_BNIC0_FLT", "",
+	"R_BNIC1_FLT", "",
+	"R_BNIC2_FLT", "",
+	"R_BNIC3_FLT", "",
+	"R_RTM_SW_FLT", "",
+	"", "",
+	"", "",
+
+	/* I0-I7 line 128-143 */
+	"EAM0_BRD_PRSNT_R_L", "",
+	"EAM1_BRD_PRSNT_R_L", "",
+	"EAM2_BRD_PRSNT_R_L", "",
+	"EAM3_BRD_PRSNT_R_L", "",
+	"FM_TPM_PRSNT_R_N", "",
+	"PDB_L_PRSNT_R_N", "",
+	"PRSNT_EDSFF_BOOT_N", "",
+	"PRSNT_CPU0_N", "",
+
+	/* J0-J7 line 144-159 */
+	"PRSNT_L_BRIDGE_R", "",
+	"PRSNT_R_BRIDGE_R", "",
+	"BRIDGE_L_MAIN_PG_R", "",
+	"BRIDGE_R_MAIN_PG_R", "",
+	"BRIDGE_L_STBY_PG_R", "",
+	"BRIDGE_R_STBY_PG_R", "",
+	"IRQ_NFC_BOARD_R", "",
+	"RSMRST_N", "",
+
+	/* K0-K7 line 160-175 */
+	"ADC_I2C_ALERT_N", "",
+	"TEMP_I2C_ALERT_R_L", "",
+	"CPU0_VR_SMB_ALERT_CPLD_N", "",
+	"COVER_INTRUDER_R_N", "",
+	"HANDLE_INTRUDER_CPLD_N", "",
+	"IRQ_MCIO_CPLD_WAKE_R_N", "",
+	"APML_CPU0_ALERT_R_N", "",
+	"PDB_ALERT_R_N", "",
+
+	/* L0-L7 line 176-191 */
+	"L_EDSFF0_PG", "",
+	"L_EDSFF1_PG", "",
+	"R_EDSFF2_PG", "",
+	"R_EDSFF3_PG", "",
+	"HPM_CPLD_HEART_BIT", "",
+	"RBB_CPLD_HEART_BIT", "",
+	"LBB_CPLD_HEART_BIT", "",
+	"FM_BIOS_POST_CMPLT_R_N", "",
+
+	/* M0-M7 line 192-207 */
+	"EAM0_SMERR_CPLD_R_L", "",
+	"EAM1_SMERR_CPLD_R_L", "",
+	"EAM2_SMERR_CPLD_R_L", "",
+	"EAM3_SMERR_CPLD_R_L", "",
+	"CPU0_SMERR_N_R", "",
+	"CPU0_NV_SAVE_N_R", "",
+	"PDB_PWR_LOSS_CPLD_N", "",
+	"IRQ_BMC_SMI_ACTIVE_R_N", "",
+
+	/* N0-N7 line 208-223 */
+	"AMCROT_BMC_S5_RDY_R", "",
+	"AMC_RDY_R", "",
+	"AMC_STBY_PGOOD_R", "",
+	"CPU_AMC_SLP_S5_R_L", "",
+	"AMC_CPU_EAMPG_R", "",
+	"DIMM_PMIC_PG_TIMEOUT", "",
+	"EAM_MOD_PWR_GD_TIMEOUT", "",
+	"CPLD_AMC_STBY_PWR_EN", "",
+
+	/* O0-O7 line 224-239 */
+	"HPM_PWR_FAIL", "Port80_b0",
+	"FM_DIMM_IP_FAIL", "Port80_b1",
+	"FM_DIMM_AH_FAIL", "Port80_b2",
+	"AMC_THERMTRIP_ASSERT", "Port80_b3",
+	"CPU_THERMTRIP_ASSERT", "Port80_b4",
+	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
+	"CPLD_SGPIO_RDY", "Port80_b6",
+	"FM_MAIN_PWREN_RMC_EN_ISO", "Port80_b7",
+
+	/* P0-P7 line 240-255 */
+	"CPU0_SLP_S5_N_R", "NFC_VEN",
+	"CPU0_SLP_S3_N_R", "",
+	"FM_CPU0_PWRGD", "",
+	"PWRGD_RMC", "",
+	"FM_RST_CPU0_RESET_N", "RBB_CPLD_RISCV_RST",
+	"FM_PWRGD_CPU0_PWROK", "LBB_CPLD_RISCV_RST",
+	"AMC_FAIL", "HPM_CPLD_RISCV_RST",
+	"S0_ON", "";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 724f4d312de4..af90a04235a0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -1,3 +1,3 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-#include "aspeed-bmc-facebook-anacapa-evt1.dtsi"
+#include "aspeed-bmc-facebook-anacapa-evt2.dtsi"

-- 
2.34.1

[PATCH v7 03/11] ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2

[Colin Huang via B4 Relay]

From: Colin Huang <u8813345@gmail.com>

Add a development-phase devicetree for the Facebook Anacapa BMC DVT
hardware revision and update the Anacapa wrapper DTS to reference
it.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi    | 168 +++++++++++++++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     |   2 +-
 2 files changed, 169 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
new file mode 100644
index 000000000000..6650a5e4e130
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+#include "aspeed-bmc-facebook-anacapa-evt2.dtsi"
+
+&sgpiom0 {
+	gpio-line-names =
+	/*in - out */
+	/* A0-A7 line 0-15 */
+	"L_FNIC_FLT", "FM_CPU0_SYS_RESET_N",
+	"L_BNIC0_FLT", "CPU0_KBRST_N",
+	"L_BNIC1_FLT", "FM_CPU0_PROCHOT_trigger_N",
+	"L_BNIC2_FLT", "FM_CLR_CMOS_R_P0",
+	"L_BNIC3_FLT", "Force_I3C_SEL",
+	"L_RTM_SW_FLT", "SYSTEM_Force_Run_AC_Cycle",
+	"", "",
+	"", "",
+
+	/* B0-B7 line 16-31 */
+	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
+	"Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
+	"Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
+	"Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",
+
+	/* C0-C7 line 32-47 */
+	"RSVD_RMC_GPIO3", "RTM_MUX_L",
+	"LEAK_DETECT_RMC_N", "RTM_MUX_R",
+	"HDR_P0_NMI_BTN_BUF_R_N", "FPGA_JTAG_SCM_DBREQ_N",
+	"Channel6_leakage_present_CPU_DIMM", "whdt_sel",
+	"R_EAM0_NIC_CBL_PRSNT_L", "JTAG_CPLD_TRST_R_N",
+	"R_EAM1_NIC_CBL_PRSNT_L", "",
+	"L_EAM0_NIC_CBL_PRSNT_L", "",
+	"L_EAM1_NIC_CBL_PRSNT_L", "",
+
+	/* D0-D7 line 48-63 */
+	"Channel0_leakage_present_EAM3", "",
+	"Channel1_leakage_present_EAM0", "",
+	"Channel2_leakage_present_Manifold1", "",
+	"Channel4_leakage_present_Manifold2", "",
+	"AMC_BRD_PRSNT_CPLD_L", "",
+	"Channel7_leakage_present_EAM2", "",
+	"", "",
+	"", "",
+
+	/* E0-E7 line 64-79 */
+	"L_PRSNT_B_FENIC_R2_N", "",
+	"L_PRSNT_B_BENIC0_R2_N", "",
+	"L_PRSNT_B_BENIC1_R2_N", "",
+	"L_PRSNT_B_BENIC2_R2_N", "",
+	"L_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* F0-F7 line 80-95 */
+	"R_PRSNT_B_FENIC_R2_N", "SGPIO_READY",
+	"R_PRSNT_B_BENIC0_R2_N", "",
+	"R_PRSNT_B_BENIC1_R2_N", "",
+	"R_PRSNT_B_BENIC2_R2_N", "",
+	"R_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* G0-G7 line 96-111 */
+	"L_PRSNT_EDSFF0_N", "",
+	"L_PRSNT_EDSFF1_N", "",
+	"R_PRSNT_EDSFF2_N", "",
+	"R_PRSNT_EDSFF3_N", "",
+	"HPM_EDSFF_PG", "",
+	"", "",
+	"P12V_PWR_CABLE_PRSNT_L_R", "FM_BMC_READY_PLD",
+	"PRSNT_NFC_BOARD_R", "",
+
+	/* H0-H7 line 112-127 */
+	"R_FNIC_FLT", "",
+	"R_BNIC0_FLT", "",
+	"R_BNIC1_FLT", "",
+	"R_BNIC2_FLT", "",
+	"R_BNIC3_FLT", "",
+	"R_RTM_SW_FLT", "",
+	"RBB_Cable_Present", "",
+	"LBB_Cable_Present", "",
+
+	/* I0-I7 line 128-143 */
+	"EAM0_BRD_PRSNT_R_L", "",
+	"EAM1_BRD_PRSNT_R_L", "",
+	"EAM2_BRD_PRSNT_R_L", "",
+	"EAM3_BRD_PRSNT_R_L", "",
+	"FM_TPM_PRSNT_R_N", "",
+	"PDB_L_PRSNT_R_N", "",
+	"PRSNT_EDSFF_BOOT_N", "",
+	"PRSNT_CPU0_N", "",
+
+	/* J0-J7 line 144-159 */
+	"PRSNT_L_BRIDGE_R", "",
+	"PRSNT_R_BRIDGE_R", "",
+	"BRIDGE_L_MAIN_PG_R", "",
+	"BRIDGE_R_MAIN_PG_R", "",
+	"BRIDGE_L_STBY_PG_R", "",
+	"BRIDGE_R_STBY_PG_R", "",
+	"IRQ_NFC_BOARD_R", "",
+	"RSMRST_N", "",
+
+	/* K0-K7 line 160-175 */
+	"ADC_I2C_ALERT_N", "",
+	"TEMP_I2C_ALERT_R_L", "",
+	"CPU0_VR_SMB_ALERT_CPLD_N", "",
+	"COVER_INTRUDER_R_N", "",
+	"HANDLE_INTRUDER_CPLD_N", "",
+	"IRQ_MCIO_CPLD_WAKE_R_N", "",
+	"APML_CPU0_ALERT_R_N", "",
+	"PDB_ALERT_R_N", "",
+
+	/* L0-L7 line 176-191 */
+	"L_EDSFF0_PG", "",
+	"L_EDSFF1_PG", "",
+	"R_EDSFF2_PG", "",
+	"R_EDSFF3_PG", "",
+	"HPM_CPLD_HEART_BIT", "",
+	"RBB_CPLD_HEART_BIT", "",
+	"LBB_CPLD_HEART_BIT", "",
+	"FM_BIOS_POST_CMPLT_R_N", "",
+
+	/* M0-M7 line 192-207 */
+	"EAM0_SMERR_CPLD_R_L", "",
+	"EAM1_SMERR_CPLD_R_L", "",
+	"EAM2_SMERR_CPLD_R_L", "",
+	"EAM3_SMERR_CPLD_R_L", "",
+	"CPU0_SMERR_N_R", "",
+	"CPU0_NV_SAVE_N_R", "",
+	"PDB_PWR_LOSS_CPLD_N", "",
+	"IRQ_BMC_SMI_ACTIVE_R_N", "",
+
+	/* N0-N7 line 208-223 */
+	"AMCROT_BMC_S5_RDY_R", "",
+	"AMC_RDY_R", "",
+	"AMC_STBY_PGOOD_R", "",
+	"CPU_AMC_SLP_S5_R_L", "",
+	"AMC_CPU_EAMPG_R", "",
+	"DIMM_PMIC_PG_TIMEOUT", "",
+	"EAM_MOD_PWR_GD_TIMEOUT", "",
+	"CPLD_AMC_STBY_PWR_EN", "",
+
+	/* O0-O7 line 224-239 */
+	"HPM_PWR_FAIL", "Port80_b0",
+	"FM_DIMM_IP_FAIL", "Port80_b1",
+	"FM_DIMM_AH_FAIL", "Port80_b2",
+	"AMC_THERMTRIP_ASSERT", "Port80_b3",
+	"CPU_THERMTRIP_ASSERT", "Port80_b4",
+	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
+	"CPLD_SGPIO_RDY", "Port80_b6",
+	"FM_MAIN_PWREN_RMC_EN_ISO", "Port80_b7",
+
+	/* P0-P7 line 240-255 */
+	"CPU0_SLP_S5_N_R", "NFC_VEN",
+	"CPU0_SLP_S3_N_R", "",
+	"FM_CPU0_PWRGD", "",
+	"PWRGD_RMC", "",
+	"FM_RST_CPU0_RESET_N", "RBB_CPLD_RISCV_RST",
+	"FM_PWRGD_CPU0_PWROK", "LBB_CPLD_RISCV_RST",
+	"AMC_FAIL", "HPM_CPLD_RISCV_RST",
+	"S0_ON", "";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index af90a04235a0..640e31a199ce 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -1,3 +1,3 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-#include "aspeed-bmc-facebook-anacapa-evt2.dtsi"
+#include "aspeed-bmc-facebook-anacapa-dvt.dtsi"

-- 
2.34.1

[PATCH v7 04/11] ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM

[Colin Huang via B4 Relay]

From: Colin Huang <u8813345@gmail.com>

The SCM FRU EEPROM I2C address differs between SCM revisions:
- Rev B uses address 0x50
- Rev C/D/E/F and later use address 0x51

Add an additional AT24C128 EEPROM node at 0x51 on i2c9 so the same
device tree can support multiple SCM revisions.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi  | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
index be7f17ad5f8e..77126418a702 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
@@ -3,6 +3,20 @@
 /dts-v1/;
 #include "aspeed-bmc-facebook-anacapa-evt1.dtsi"
 
+// SCM
+&i2c9 {
+	// SCM FRU
+	// | DC-SCM Rev        | Slave address of eeprom  |
+	// |-------------------|--------------------------|
+	// | Rev B             | 0x50                     |
+	// | Rev C/D/E/F/above | 0x51                     |
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+};
+
 &sgpiom0 {
 	gpio-line-names =
 	/*in - out */

-- 
2.34.1

[PATCH v7 05/11] ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board

[Colin Huang via B4 Relay]

From: Carl Lee <carl.lee@amd.com>

Add eeprom device node for NFC adaptor board FRU.

Signed-off-by: Carl Lee <carl.lee@amd.com>
---
 .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi   | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
index 77126418a702..ed46a53aab24 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
@@ -17,6 +17,19 @@ eeprom@51 {
 	};
 };
 
+// MB
+&i2c13 {
+	i2c-mux@70 {
+		i2c@7 {
+			// NFC adaptor board FRU
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
 &sgpiom0 {
 	gpio-line-names =
 	/*in - out */

-- 
2.34.1

[PATCH v7 06/11] ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering

[Colin Huang via B4 Relay]

From: Rex Fu <rex.fu.amd@gmail.com>

Update the LPDB and RPDB fan GPIO line names to align with the platform
fan numbering scheme.

The LPDB fan GPIOs are named FAN0 through FAN4, while the RPDB fan GPIOs
are named FAN5 through FAN8. This keeps the GPIO line names consistent
with the fan inventory and platform-level fan numbering.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi   | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
index ed46a53aab24..83b3b99ceccb 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
@@ -3,6 +3,40 @@
 /dts-v1/;
 #include "aspeed-bmc-facebook-anacapa-evt1.dtsi"
 
+// MB - PDB
+&i2c8 {
+	i2c-mux@72 {
+		i2c@0 {
+			gpio@24 {
+				gpio-line-names =
+					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
+					"RPDB_PWRGD_P50V_HSC4_SYS_R",
+					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
+					"RPDB_P50V_FAN5_R2_PG", "RPDB_P50V_FAN6_R2_PG",
+					"RPDB_P50V_FAN7_R2_PG", "RPDB_P50V_FAN8_R2_PG",
+					"", "RPDB_FAN5_PRSNT_N_R",
+					"", "RPDB_FAN6_PRSNT_N_R",
+					"RPDB_FAN7_PRSNT_N_R", "RPDB_FAN8_PRSNT_N_R",
+					"", "";
+			};
+		};
+
+		i2c@1 {
+			gpio@24 {
+				gpio-line-names =
+					"LPDB_P50V_FAN0_R2_PG","LPDB_P50V_FAN1_R2_PG",
+					"LPDB_P50V_FAN2_R2_PG","LPDB_P50V_FAN3_R2_PG",
+					"LPDB_P50V_FAN4_R2_PG","LPDB_FAN0_PRSNT_N_R",
+					"LPDB_FAN1_PRSNT_N_R","LPDB_FAN2_PRSNT_N_R",
+					"LPDB_FAN3_PRSNT_N_R","LPDB_FAN4_PRSNT_N_R",
+					"","",
+					"","",
+					"","";
+			};
+		};
+	};
+};
+
 // SCM
 &i2c9 {
 	// SCM FRU

-- 
2.34.1

[PATCH v7 07/11] ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC

[Colin Huang via B4 Relay]

From: Andy Chung <Andy.Chung@amd.com>

Add the mctp-controller property to enable frontend NIC management
via PLDM over MCTP.
Also add EEPROM device for NIC FRU and reorder the I2C virtual bus
index accroding to the system silkscreen index.

Signed-off-by: Andy Chung <Andy.Chung@amd.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi   | 137 +++++++++++++++++++++
 1 file changed, 137 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
index 83b3b99ceccb..c0b2976ad9e9 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
@@ -3,6 +3,25 @@
 /dts-v1/;
 #include "aspeed-bmc-facebook-anacapa-evt1.dtsi"
 
+&{/aliases} {
+	i2c36 = &i2c11mux0ch5;
+	i2c37 = &i2c11mux0ch6;
+	i2c38 = &i2c11mux0ch7;
+	i2c39 = &i2c11mux0ch0;
+	i2c40 = &i2c11mux0ch1;
+	i2c41 = &i2c11mux0ch2;
+	i2c42 = &i2c11mux0ch3;
+	i2c43 = &i2c11mux0ch4;
+	i2c44 = &i2c10mux0ch1;
+	i2c45 = &i2c10mux0ch2;
+	i2c46 = &i2c10mux0ch3;
+	i2c47 = &i2c10mux0ch4;
+	i2c48 = &i2c10mux0ch5;
+	i2c49 = &i2c10mux0ch6;
+	i2c50 = &i2c10mux0ch7;
+	i2c51 = &i2c10mux0ch0;
+};
+
 // MB - PDB
 &i2c8 {
 	i2c-mux@72 {
@@ -51,6 +70,124 @@ eeprom@51 {
 	};
 };
 
+// R Bridge Board
+&i2c10 {
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		/delete-property/ i2c-mux-idle-disconnect;
+
+		i2c10mux0ch1: i2c@1 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c10mux0ch2: i2c@2 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c10mux0ch3: i2c@3 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c10mux0ch4: i2c@4 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+// L Bridge Board
+&i2c11 {
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		/delete-property/ i2c-mux-idle-disconnect;
+
+		i2c11mux0ch0: i2c@0 {
+			mctp-controller;
+			// FE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch1: i2c@1 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch2: i2c@2 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch3: i2c@3 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch4: i2c@4 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
 // MB
 &i2c13 {
 	i2c-mux@70 {

-- 
2.34.1

[PATCH v7 08/11] ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors

[Colin Huang via B4 Relay]

From: Peter Shen <peter.shen@amd.com>

Add shunt resistor configuration for LTC4287 hot-swap controllers on
Anacapa EVT2 platform.

The resistor values are required for accurate current and power
measurement by the driver. These settings reflect the actual BOM used
on EVT2, where different sense resistor values (150 uOhm and 250 uOhm)
are populated across rails.

Without this configuration, the reported readings would be incorrect.

Signed-off-by: Peter Shen <peter.shen@amd.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi   | 42 ++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
index c0b2976ad9e9..92be113463de 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
@@ -38,6 +38,30 @@ gpio@24 {
 					"RPDB_FAN7_PRSNT_N_R", "RPDB_FAN8_PRSNT_N_R",
 					"", "";
 			};
+
+			power-monitor@42 {
+				compatible = "lltc,ltc4287";
+				reg = <0x42>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@43 {
+				compatible = "lltc,ltc4287";
+				reg = <0x43>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@44 {
+				compatible = "lltc,ltc4287";
+				reg = <0x44>;
+				shunt-resistor-micro-ohms = <250>;
+			};
+
+			power-monitor@45 {
+				compatible = "lltc,ltc4287";
+				reg = <0x45>;
+				shunt-resistor-micro-ohms = <250>;
+			};
 		};
 
 		i2c@1 {
@@ -52,6 +76,24 @@ gpio@24 {
 					"","",
 					"","";
 			};
+
+			power-monitor@40 {
+				compatible = "lltc,ltc4287";
+				reg = <0x40>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@41 {
+				compatible = "lltc,ltc4287";
+				reg = <0x41>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@45 {
+				compatible = "lltc,ltc4287";
+				reg = <0x45>;
+				shunt-resistor-micro-ohms = <250>;
+			};
 		};
 	};
 };

-- 
2.34.1

[PATCH v7 09/11] ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander

[Colin Huang via B4 Relay]

From: Rex Fu <rex.fu.amd@gmail.com>

Add PCA9554 GPIO expanders for PDB fuse monitor signals on the
Anacapa DVT board.

The patch adds GPIO expander definitions for both the left and
right PDBs under the i2c8 multiplexer and updates the associated
gpio-line-names to reflect the final signal assignments.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi    | 92 ++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
index 6650a5e4e130..cb4c41bd8b8f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
@@ -3,6 +3,98 @@
 /dts-v1/;
 #include "aspeed-bmc-facebook-anacapa-evt2.dtsi"
 
+// MB - PDB
+&i2c8 {
+	i2c-mux@72 {
+		i2c@0 {
+			gpio@22 {
+				gpio-line-names =
+					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TMP432_U8_ALERT_R_N",
+					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
+					"RPDB_FAN_CT_FAN_FAIL_R_N", "RPDB_VERID_A0",
+					"RPDB_VERID_A1", "RPDB_VERID_A2",
+					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
+					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
+					"RPDB_P12V_MB_VRM_ALERT_R_N",
+					"RPDB_P12V_STBY_VRM_ALERT_R_N",
+					"RPDB_PGD_P3V3_STBY_PWRGD_R",
+					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
+			};
+
+			gpio@24 {
+				gpio-line-names =
+					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
+					"RPDB_PWRGD_P50V_HSC4_SYS_R",
+					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
+					"RPDB_P50V_FAN5_R2_PG", "RPDB_P50V_FAN6_R2_PG",
+					"RPDB_P50V_FAN7_R2_PG", "RPDB_P50V_FAN8_R2_PG",
+					"RPDB_SKU_ID0", "RPDB_FAN5_PRSNT_N_R",
+					"", "RPDB_FAN6_PRSNT_N_R",
+					"RPDB_FAN7_PRSNT_N_R", "RPDB_FAN8_PRSNT_N_R",
+					"", "";
+			};
+
+			gpio@38 {
+				compatible = "nxp,pca9554";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"RPDB_P50V_FUSE2_TVS1", "RPDB_P50V_FUSE2_TVS2",
+					"RPDB_P50V_FUSE3_TVS1", "RPDB_P50V_FUSE3_TVS2",
+					"RPDB_P50V_FUSE4_TVS1", "",
+					"", "";
+
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		i2c@1 {
+			gpio@22 {
+				gpio-line-names =
+					"LPDB_FAN_FULL_SPEED_R_N", "LPDB_I2C_TEMP75_U8_ALERT_R_N",
+					"LPDB_I2C_TMP432_U29_ALERT_R_N", "LPDB_GLOBAL_WP",
+					"LPDB_FAN_CT_FAN_FAIL_R_N", "LPDB_VERID_A0",
+					"LPDB_VERID_A1", "LPDB_VERID_A2",
+					"LPDB_ALERT_P50V_HSC0_R_N", "LPDB_ALERT_P50V_HSC1_R_N",
+					"LPDB_ALERT_P50V_HSC5_R_N", "LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
+					"LPDB_EAM0_PRSNT_MOS_N_R", "LPDB_EAM1_PRSNT_MOS_N_R",
+					"LPDB_PWRGD_P50V_HSC5_SYS_R", "BARKLIP_PRSNT_N_R3";
+			};
+
+			gpio@24 {
+				gpio-line-names =
+					"LPDB_P50V_FAN0_R2_PG", "LPDB_P50V_FAN1_R2_PG",
+					"LPDB_P50V_FAN2_R2_PG", "LPDB_P50V_FAN3_R2_PG",
+					"LPDB_P50V_FAN4_R2_PG", "LPDB_FAN0_PRSNT_N_R",
+					"LPDB_FAN1_PRSNT_N_R", "LPDB_FAN2_PRSNT_N_R",
+					"LPDB_FAN3_PRSNT_N_R", "LPDB_FAN4_PRSNT_N_R",
+					"LPDB_SKU_ID0", "",
+					"", "",
+					"", "LPDB_PG_P3V3_R";
+			};
+
+			gpio@38 {
+				compatible = "nxp,pca9554";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"LPDB_P50V_FUSE0_TVS1", "LPDB_P50V_FUSE0_TVS2",
+					"LPDB_P50V_FUSE1_TVS1", "LPDB_P50V_FUSE1_TVS2",
+					"LPDB_P50V_FUSE5_TVS1", "",
+					"", "";
+
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
 &sgpiom0 {
 	gpio-line-names =
 	/*in - out */

-- 
2.34.1

[PATCH v7 10/11] ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names

[Colin Huang via B4 Relay]

From: Rex Fu <rex.fu.amd@gmail.com>

Remove the board location suffixes from the leakage present GPIO line
names. The channel number is enough to identify each leakage present
signal.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi    | 28 +++++++++++-----------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
index cb4c41bd8b8f..046a70f3c71f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
@@ -109,32 +109,32 @@ &sgpiom0 {
 	"", "",
 
 	/* B0-B7 line 16-31 */
-	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
-	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
-	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
-	"Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",
-	"Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
-	"Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
-	"Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
-	"Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",
+	"Channel0_leakage", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel5_leakage_present", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage", "BMC_AINIC0_WP_R2_L",
+	"Channel5_leakage", "BMC_AINIC1_WP_R2_L",
+	"Channel6_leakage", "CPLD_BUF_R_AGPIO330",
+	"Channel7_leakage", "CPLD_BUF_R_AGPIO331",
 
 	/* C0-C7 line 32-47 */
 	"RSVD_RMC_GPIO3", "RTM_MUX_L",
 	"LEAK_DETECT_RMC_N", "RTM_MUX_R",
 	"HDR_P0_NMI_BTN_BUF_R_N", "FPGA_JTAG_SCM_DBREQ_N",
-	"Channel6_leakage_present_CPU_DIMM", "whdt_sel",
+	"Channel6_leakage_present", "whdt_sel",
 	"R_EAM0_NIC_CBL_PRSNT_L", "JTAG_CPLD_TRST_R_N",
 	"R_EAM1_NIC_CBL_PRSNT_L", "",
 	"L_EAM0_NIC_CBL_PRSNT_L", "",
 	"L_EAM1_NIC_CBL_PRSNT_L", "",
 
 	/* D0-D7 line 48-63 */
-	"Channel0_leakage_present_EAM3", "",
-	"Channel1_leakage_present_EAM0", "",
-	"Channel2_leakage_present_Manifold1", "",
-	"Channel4_leakage_present_Manifold2", "",
+	"Channel0_leakage_present", "",
+	"Channel1_leakage_present", "",
+	"Channel2_leakage_present", "",
+	"Channel4_leakage_present", "",
 	"AMC_BRD_PRSNT_CPLD_L", "",
-	"Channel7_leakage_present_EAM2", "",
+	"Channel7_leakage_present", "",
 	"", "",
 	"", "",
 

-- 
2.34.1

[PATCH v7 11/11] ARM: dts: aspeed: anacapa: Add SPI flash VCC supply

[Colin Huang via B4 Relay]

From: Rex Fu <rex.fu.amd@gmail.com>

Specify the 3.3 V auxiliary rail as the SPI flash VCC supply to
avoid using the dummy regulator during device initialization.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
index 017700920cb1..03dbc9cfbb06 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
@@ -93,7 +93,7 @@ memory@80000000 {
 		device_type = "memory";
 	};
 
-	regulator-p3v3-bmc-aux {
+	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
 		compatible = "regulator-fixed";
 		regulator-always-on;
 		regulator-max-microvolt = <3300000>;
@@ -171,6 +171,7 @@ &fmc {
 	flash@0 {
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		vcc-supply = <&p3v3_bmc_aux>;
 		m25p,fast-read;
 
 		status = "okay";
@@ -180,6 +181,7 @@ flash@0 {
 	flash@1 {
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		vcc-supply = <&p3v3_bmc_aux>;
 		m25p,fast-read;
 
 		status = "okay";
@@ -1074,6 +1076,7 @@ flash@0 {
 		spi-max-frequency = <12000000>;
 		spi-rx-bus-width = <2>;
 		spi-tx-bus-width = <2>;
+		vcc-supply = <&p3v3_bmc_aux>;
 
 		status = "okay";
 	};

-- 
2.34.1

Re: [PATCH v7 02/11] ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Incorrect GPIO line name mapping due to a likely copy-paste error in the B-block of sgpiom0.
--

commit aa80bc774dd824dd074a3ccff2eaf0de685d5eb4
Author: Colin Huang <u8813345@gmail.com>

ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1

This commit adds a development-phase devicetree for the Facebook Anacapa BMC
EVT2 hardware revision. It updates the Anacapa wrapper DTS to reference this
new EVT2 file instead of EVT1.

> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
> new file mode 100644
> index 0000000000000..be7f17ad5f8ec
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
> @@ -0,0 +1,168 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +/dts-v1/;
> +#include "aspeed-bmc-facebook-anacapa-evt1.dtsi"
> +
> +&sgpiom0 {
> +	gpio-line-names =

[ ... ]

> +	/* B0-B7 line 16-31 */
> +	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
> +	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
> +	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
> +	"Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",

[Severity: Medium]
Does this code break the sequence of ChannelX_leakage pins?

It places a _present signal here instead of in the D or C blocks, which
strongly suggests a copy-paste error overwriting what should have been
Channel3_leakage.

If this is an unintended copy-paste error in the B-block of sgpiom0,
userspace tools monitoring hardware could read the wrong physical pin for
Channel 5's presence and fail to read Channel 3's leakage entirely,
breaking hardware monitoring logic.

> +	"Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
> +	"Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
> +	"Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
> +	"Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260901-anacapa-devlop-phase-devicetree-v7-0-0bd71d2e0105@gmail.com?part=2

Re: [PATCH v7 01/11] ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:

New issues:
- [Critical] The board compatible string was silently changed from "facebook,anacapa-bmc" to "facebook,anacapa", breaking dt-bindings and backward compatibility.
- [Low] The /dts-v1/ directive is improperly placed inside a .dtsi include file instead of the top-level .dts file.

Pre-existing issues:
- [High] Multiple consumer nodes request GPIO pins and interrupts from sgpiom0 that strictly exceed its defined maximum limit of 128.
--

commit aa5900d50b8d457379595fa4812e97d97a192959
Author: Colin Huang <u8813345@gmail.com>
Subject: ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it

This commit introduces an EVT1 development-phase devicetree for the
Facebook Anacapa BMC. It updates the top-level wrapper DTS to include
the EVT1 hardware revision file and pushes down several configurations.

> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
> new file mode 100644
> index 0000000000000..017700920cb1d
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
> @@ -0,0 +1,1128 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +/dts-v1/;
> +#include "aspeed-g6.dtsi"

[Severity: Low]
Is it standard practice to place the /dts-v1/ directive inside a .dtsi
include file instead of the top-level .dts file?

> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> +	compatible = "facebook,anacapa", "aspeed,ast2600";

[Severity: Critical]
Does changing the board compatible string from "facebook,anacapa-bmc" to
"facebook,anacapa" break dt-bindings and backward compatibility? 

Userspace applications and bootloaders often rely on the exact string in
/proc/device-tree/compatible to identify the board. Could this modification
cause them to fail unconditionally on boot?

[ ... ]
> +		i2c8mux0ch0: i2c@0 {
> +			reg = <0>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			adc@1f {
> +				compatible = "ti,adc128d818";
> +				reg = <0x1f>;
> +				ti,mode = /bits/ 8 <1>;
> +			};
> +
> +			gpio@22 {
> +				compatible = "nxp,pca9555";
> +				reg = <0x22>;
> +				#gpio-cells = <2>;
> +				gpio-controller;
[ ... ]
> +				interrupt-parent = <&sgpiom0>;
> +
> +				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
> +			};

[Severity: High]
This is a pre-existing issue, but does requesting IRQ line 174 from the
sgpiom0 controller exceed its defined maximum limit of 128?

The gpiolib and IRQ domain could reject this out-of-bounds request, causing
the driver to fail probing with -EINVAL.

[ ... ]
> +		i2c13mux0ch7: i2c@7 {
> +			reg = <7>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			nfc@28 {
> +				compatible = "nxp,nxp-nci-i2c";
> +				reg = <0x28>;
> +
> +				enable-gpios = <&sgpiom0 241 GPIO_ACTIVE_HIGH>;
> +				interrupt-parent = <&sgpiom0>;
> +
> +				interrupts = <156 IRQ_TYPE_LEVEL_HIGH>;
> +			};

[Severity: High]
This is a pre-existing issue, but does requesting GPIO 241 and IRQ 156 from
sgpiom0 completely overshoot the 128-pin cap?

Since the controller restricts its capacity, the out-of-bounds requests could
lead to probe failures unconditionally during driver initialization.

[ ... ]
> +&sgpiom0 {
> +	bus-frequency = <2000000>;
[ ... ]
> +	ngpios = <128>;
> +
> +	status = "okay";
> +};

[ ... ]
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
> index 1fddf3a5d1383..724f4d312de4d 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
> @@ -1,1079 +1,3 @@
>  // SPDX-License-Identifier: GPL-2.0-or-later
>  
> -/dts-v1/;
> -#include "aspeed-g6.dtsi"

[Severity: Low]
Does stripping the /dts-v1/ directive from the top-level .dts file violate
style and architecture practices for Device Trees?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260901-anacapa-devlop-phase-devicetree-v7-0-0bd71d2e0105@gmail.com?part=1

Re: [PATCH v7 01/11] ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it

[Colin Huang]

<sashiko-bot@kernel.org> 於 2026年9月1日週二 下午8:30寫道：
>
> Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
>
> New issues:
> - [Critical] The board compatible string was silently changed from "facebook,anacapa-bmc" to "facebook,anacapa", breaking dt-bindings and backward compatibility.
> - [Low] The /dts-v1/ directive is improperly placed inside a .dtsi include file instead of the top-level .dts file.
>
> Pre-existing issues:
> - [High] Multiple consumer nodes request GPIO pins and interrupts from sgpiom0 that strictly exceed its defined maximum limit of 128.
> --
>
> commit aa5900d50b8d457379595fa4812e97d97a192959
> Author: Colin Huang <u8813345@gmail.com>
> Subject: ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
>
> This commit introduces an EVT1 development-phase devicetree for the
> Facebook Anacapa BMC. It updates the top-level wrapper DTS to include
> the EVT1 hardware revision file and pushes down several configurations.
>
> > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
> > new file mode 100644
> > index 0000000000000..017700920cb1d
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi
> > @@ -0,0 +1,1128 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +/dts-v1/;
> > +#include "aspeed-g6.dtsi"
>
> [Severity: Low]
> Is it standard practice to place the /dts-v1/ directive inside a .dtsi
> include file instead of the top-level .dts file?
I will put "/dts-v1/" into aspeed-bmc-facebook-anacapa.dts
>
> > +#include <dt-bindings/gpio/aspeed-gpio.h>
> > +#include <dt-bindings/i2c/i2c.h>
> > +
> > +/ {
> > +     compatible = "facebook,anacapa", "aspeed,ast2600";
>
> [Severity: Critical]
> Does changing the board compatible string from "facebook,anacapa-bmc" to
> "facebook,anacapa" break dt-bindings and backward compatibility?
>
I will fix it. thanks.

> Userspace applications and bootloaders often rely on the exact string in
> /proc/device-tree/compatible to identify the board. Could this modification
> cause them to fail unconditionally on boot?
>
> [ ... ]
> > +             i2c8mux0ch0: i2c@0 {
> > +                     reg = <0>;
> > +                     #address-cells = <1>;
> > +                     #size-cells = <0>;
> > +
> > +                     adc@1f {
> > +                             compatible = "ti,adc128d818";
> > +                             reg = <0x1f>;
> > +                             ti,mode = /bits/ 8 <1>;
> > +                     };
> > +
> > +                     gpio@22 {
> > +                             compatible = "nxp,pca9555";
> > +                             reg = <0x22>;
> > +                             #gpio-cells = <2>;
> > +                             gpio-controller;
> [ ... ]
> > +                             interrupt-parent = <&sgpiom0>;
> > +
> > +                             interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
> > +                     };
>
> [Severity: High]
> This is a pre-existing issue, but does requesting IRQ line 174 from the
> sgpiom0 controller exceed its defined maximum limit of 128?

This's not an issue.

For ASPEED SGPIO, ngpios in DT is the number of SGPIO pins, while the GPIO
consumer index space is twice that size because each SGPIO pin is exposed as an
input/output pair.

Evidence in tree:

Binding explicitly states each SGPIO is represented as an input/output pair:
aspeed,sgpio.yaml:39
Driver registers total GPIO lines as nr_gpios * 2:
gpio-aspeed-sgpio.c:676


>
> The gpiolib and IRQ domain could reject this out-of-bounds request, causing
> the driver to fail probing with -EINVAL.
>
> [ ... ]
> > +             i2c13mux0ch7: i2c@7 {
> > +                     reg = <7>;
> > +                     #address-cells = <1>;
> > +                     #size-cells = <0>;
> > +
> > +                     nfc@28 {
> > +                             compatible = "nxp,nxp-nci-i2c";
> > +                             reg = <0x28>;
> > +
> > +                             enable-gpios = <&sgpiom0 241 GPIO_ACTIVE_HIGH>;
> > +                             interrupt-parent = <&sgpiom0>;
> > +
> > +                             interrupts = <156 IRQ_TYPE_LEVEL_HIGH>;
> > +                     };
>
> [Severity: High]
> This is a pre-existing issue, but does requesting GPIO 241 and IRQ 156 from
> sgpiom0 completely overshoot the 128-pin cap?
>
> Since the controller restricts its capacity, the out-of-bounds requests could
> lead to probe failures unconditionally during driver initialization.
>
This's not an issue.

For ASPEED SGPIO, ngpios in DT is the number of SGPIO pins, while the GPIO
consumer index space is twice that size because each SGPIO pin is exposed as an
input/output pair.

Evidence in tree:

Binding explicitly states each SGPIO is represented as an input/output pair:
aspeed,sgpio.yaml:39
Driver registers total GPIO lines as nr_gpios * 2:
gpio-aspeed-sgpio.c:676

> [ ... ]
> > +&sgpiom0 {
> > +     bus-frequency = <2000000>;
> [ ... ]
> > +     ngpios = <128>;
> > +
> > +     status = "okay";
> > +};
>
> [ ... ]
> > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
> > index 1fddf3a5d1383..724f4d312de4d 100644
> > --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
> > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
> > @@ -1,1079 +1,3 @@
> >  // SPDX-License-Identifier: GPL-2.0-or-later
> >
> > -/dts-v1/;
> > -#include "aspeed-g6.dtsi"
>
> [Severity: Low]
> Does stripping the /dts-v1/ directive from the top-level .dts file violate
> style and architecture practices for Device Trees?
>
> --
> Sashiko AI review · https://sashiko.dev/#/patchset/20260901-anacapa-devlop-phase-devicetree-v7-0-0bd71d2e0105@gmail.com?part=1

Re: [PATCH v7 02/11] ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1

[Colin Huang]

<sashiko-bot@kernel.org> 於 2026年9月1日週二 下午8:28寫道：
>
> Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
> - [Medium] Incorrect GPIO line name mapping due to a likely copy-paste error in the B-block of sgpiom0.
> --
>
> commit aa80bc774dd824dd074a3ccff2eaf0de685d5eb4
> Author: Colin Huang <u8813345@gmail.com>
>
> ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
>
> This commit adds a development-phase devicetree for the Facebook Anacapa BMC
> EVT2 hardware revision. It updates the Anacapa wrapper DTS to reference this
> new EVT2 file instead of EVT1.
>
> > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
> > new file mode 100644
> > index 0000000000000..be7f17ad5f8ec
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
> > @@ -0,0 +1,168 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +/dts-v1/;
> > +#include "aspeed-bmc-facebook-anacapa-evt1.dtsi"
> > +
> > +&sgpiom0 {
> > +     gpio-line-names =
>
> [ ... ]
>
> > +     /* B0-B7 line 16-31 */
> > +     "Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
> > +     "Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
> > +     "Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
> > +     "Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",
>
> [Severity: Medium]
> Does this code break the sequence of ChannelX_leakage pins?
>
> It places a _present signal here instead of in the D or C blocks, which
> strongly suggests a copy-paste error overwriting what should have been
> Channel3_leakage.
>
> If this is an unintended copy-paste error in the B-block of sgpiom0,
> userspace tools monitoring hardware could read the wrong physical pin for
> Channel 5's presence and fail to read Channel 3's leakage entirely,
> breaking hardware monitoring logic.
>
This is not a copy-paste error.


> > +     "Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
> > +     "Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
> > +     "Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
> > +     "Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",
>
> --
> Sashiko AI review · https://sashiko.dev/#/patchset/20260901-anacapa-devlop-phase-devicetree-v7-0-0bd71d2e0105@gmail.com?part=2