Devicetree
 help / color / mirror / Atom feed
From: rofikkerneldev <rofikcoga@gmail.com>
To: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	rofikkerneldev <rofikcoga@gmail.com>
Subject: [PATCH v1 07/11] Input: touchscreen: add Silicon Works SW42902 support
Date: Tue, 17 Nov 2026 13:39:42 +0100	[thread overview]
Message-ID: <20261117123946.668557-8-rofikcoga@gmail.com> (raw)
In-Reply-To: <20261117123946.668557-1-rofikcoga@gmail.com>

Add basic multitouch support for the SW42902 controller. Implement the
GPIO power and reset sequence and use the firmware already present in
controller flash; no firmware update is performed.

Signed-off-by: rofikkerneldev <rofikcoga@gmail.com>
---
 MAINTAINERS                         |   1 +
 drivers/input/touchscreen/Kconfig   |  11 +
 drivers/input/touchscreen/Makefile  |   1 +
 drivers/input/touchscreen/sw42902.c | 315 ++++++++++++++++++++++++++++
 4 files changed, 328 insertions(+)
 create mode 100644 drivers/input/touchscreen/sw42902.c

diff --git a/MAINTAINERS b/MAINTAINERS
index f4c54d7d86bd8..83bbedde94533 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -25840,6 +25840,7 @@ M:	rofikkerneldev <rofikcoga@gmail.com>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/input/touchscreen/lg,sw42902.yaml
+F:	drivers/input/touchscreen/sw42902.c
 
 SILVACO I3C DUAL-ROLE MASTER
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 9b9ae8ac3f7fd..eadba5125a225 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1402,6 +1402,17 @@ config TOUCHSCREEN_ZINITIX
 	  To compile this driver as a module, choose M here: the
 	  module will be called zinitix.
 
+config TOUCHSCREEN_SW42902
+	tristate "Silicon Works SW42902 touchscreen"
+	depends on I2C
+	depends on GPIOLIB
+	help
+	  Say Y here for the SW42902 I2C touchscreen used in the LG V60.
+	  Basic multitouch uses the controller's existing flash firmware.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sw42902.
+
 config TOUCHSCREEN_HIMAX_HX83112B
 	tristate "Himax hx83112b touchscreen driver"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index bfd9de83389d8..ee312c2d1529c 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -119,3 +119,4 @@ obj-$(CONFIG_TOUCHSCREEN_IQS5XX)	+= iqs5xx.o
 obj-$(CONFIG_TOUCHSCREEN_IQS7211)	+= iqs7211.o
 obj-$(CONFIG_TOUCHSCREEN_ZINITIX)	+= zinitix.o
 obj-$(CONFIG_TOUCHSCREEN_HIMAX_HX83112B)	+= himax_hx83112b.o
+obj-$(CONFIG_TOUCHSCREEN_SW42902)		+= sw42902.o
diff --git a/drivers/input/touchscreen/sw42902.c b/drivers/input/touchscreen/sw42902.c
new file mode 100644
index 0000000000000..7b39a97053c63
--- /dev/null
+++ b/drivers/input/touchscreen/sw42902.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Silicon Works SW42902 touchscreen, as used by LG V60 (timelm).
+ * Register protocol and report layout derived from the LGE vendor driver
+ * (Copyright (C) 2015 LGE, author hoyeon.jang@lge.com).
+ * This driver uses the controller's existing flash firmware.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/unaligned.h>
+
+#define SW42902_MAX_CONTACTS	10
+#define SW42902_REPORT_SIZE	(12 + 24 + 12 * SW42902_MAX_CONTACTS)
+#define SW42902_IC_STATUS	0x600
+#define SW42902_VERSION		0x642
+#define SW42902_DEVICE_CTL	0xc00
+#define SW42902_INTERRUPT_CTL	0xc01
+#define SW42902_DRIVING_CTL	0xc03
+#define SW42902_SERIAL_SPI_EN	0xfe4
+#define SW42902_DRIVING_STOP	0x04
+#define SW42902_DRIVING_U3	0x8303
+
+struct sw42902 {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct touchscreen_properties prop;
+	struct gpio_desc *reset;
+	struct gpio_desc *vcl;
+	struct gpio_desc *vdd;
+	u8 report[SW42902_REPORT_SIZE];
+};
+
+static int sw42902_read(struct sw42902 *ts, u16 reg, void *data, u16 len)
+{
+	u8 command[] = { (reg >> 8) | (len > 4 ? 0x20 : 0), reg & 0xff };
+	struct i2c_msg msgs[] = {
+		{ .addr = ts->client->addr, .len = sizeof(command),
+		  .buf = command },
+		{ .addr = ts->client->addr, .flags = I2C_M_RD,
+		  .len = len, .buf = data },
+	};
+	int ret;
+
+	ret = i2c_transfer(ts->client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		return ret;
+	return ret == ARRAY_SIZE(msgs) ? 0 : -EIO;
+}
+
+static int sw42902_write(struct sw42902 *ts, u16 reg, u32 value)
+{
+	u8 command[6] = { 0x40 | (reg >> 8), reg & 0xff };
+	int ret;
+
+	put_unaligned_le32(value, command + 2);
+	ret = i2c_master_send(ts->client, command, sizeof(command));
+	if (ret < 0)
+		return ret;
+	return ret == sizeof(command) ? 0 : -EIO;
+}
+
+static void sw42902_release_contacts(struct sw42902 *ts)
+{
+	int i;
+
+	for (i = 0; i < SW42902_MAX_CONTACTS; i++) {
+		input_mt_slot(ts->input, i);
+		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, false);
+	}
+	input_mt_sync_frame(ts->input);
+	input_sync(ts->input);
+}
+
+static irqreturn_t sw42902_irq(int irq, void *data)
+{
+	struct sw42902 *ts = data;
+	struct input_dev *input = ts->input;
+	u32 status, header;
+	unsigned int count, i;
+	int ret;
+
+	ret = sw42902_read(ts, SW42902_IC_STATUS, ts->report,
+			   sizeof(ts->report));
+	if (ret) {
+		dev_err_ratelimited(&ts->client->dev, "report read failed: %d\n", ret);
+		sw42902_release_contacts(ts);
+		return IRQ_HANDLED;
+	}
+
+	status = get_unaligned_le32(ts->report + 4);
+	header = get_unaligned_le32(ts->report + 8);
+	/* Only normal absolute-touch reports; ignore pen/gesture/debug IRQs. */
+	if (((status >> 16) & 0xf) != 5 || (header & 0xff))
+		return IRQ_HANDLED;
+
+	count = (header >> 8) & 0x1f;
+	if (count > SW42902_MAX_CONTACTS) {
+		dev_warn_ratelimited(&ts->client->dev, "invalid contact count: %u\n", count);
+		sw42902_release_contacts(ts);
+		return IRQ_HANDLED;
+	}
+
+	/* A palm report cancels all active fingers. */
+	if (header & BIT(31)) {
+		sw42902_release_contacts(ts);
+		return IRQ_HANDLED;
+	}
+
+	for (i = 0; i < count; i++) {
+		const u8 *contact = ts->report + 36 + 12 * i;
+		u32 a = get_unaligned_le32(contact);
+		u32 b = get_unaligned_le32(contact + 4);
+		u32 c = get_unaligned_le32(contact + 8);
+		unsigned int id = a & 0x1f;
+		unsigned int event = (a >> 16) & 3;
+
+		if (id == 15) {
+			sw42902_release_contacts(ts);
+			return IRQ_HANDLED;
+		}
+		if (id >= SW42902_MAX_CONTACTS || (event != 1 && event != 2))
+			continue;
+
+		input_mt_slot(input, id);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+		touchscreen_report_pos(input, &ts->prop, a >> 18, b & 0x3fff, true);
+		input_report_abs(input, ABS_MT_PRESSURE, (b >> 14) & 0xff);
+		input_report_abs(input, ABS_MT_TOUCH_MAJOR, (c >> 4) & 0x3fff);
+		input_report_abs(input, ABS_MT_TOUCH_MINOR, c >> 18);
+	}
+
+	input_mt_sync_frame(input);
+	input_sync(input);
+	return IRQ_HANDLED;
+}
+
+static void sw42902_power_off(void *data)
+{
+	struct sw42902 *ts = data;
+
+	gpiod_set_value_cansleep(ts->reset, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(ts->vdd, 0);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(ts->vcl, 0);
+}
+
+static void sw42902_power_on(struct sw42902 *ts)
+{
+	gpiod_set_value_cansleep(ts->vcl, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(ts->vdd, 1);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(ts->reset, 0);
+	/* Docomo downstream DT specifies a 90 ms hardware reset delay. */
+	msleep(90);
+}
+
+static int sw42902_start(struct sw42902 *ts)
+{
+	u8 version[4];
+	int ret;
+
+	ret = sw42902_read(ts, SW42902_VERSION, version, sizeof(version));
+	if (ret)
+		return ret;
+	if (version[2] != 10 || (version[3] & 0xf) != 4) {
+		dev_err(&ts->client->dev, "unexpected chip/protocol: %u/%u\n",
+			version[2], version[3] & 0xf);
+		return -ENODEV;
+	}
+
+	ret = sw42902_write(ts, SW42902_SERIAL_SPI_EN, 0);
+	if (ret)
+		return ret;
+	ret = sw42902_write(ts, SW42902_DEVICE_CTL, 1);
+	if (ret)
+		return ret;
+	ret = sw42902_write(ts, SW42902_INTERRUPT_CTL, 1);
+	if (ret)
+		return ret;
+	ret = sw42902_write(ts, SW42902_DRIVING_CTL, SW42902_DRIVING_STOP);
+	if (ret)
+		return ret;
+	msleep(30);
+	return sw42902_write(ts, SW42902_DRIVING_CTL, SW42902_DRIVING_U3);
+}
+
+static int sw42902_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct sw42902 *ts;
+	struct input_dev *input;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -EOPNOTSUPP;
+	if (client->irq <= 0)
+		return dev_err_probe(dev, -EINVAL, "missing interrupt\n");
+
+	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+	ts->client = client;
+	i2c_set_clientdata(client, ts);
+
+	ts->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ts->reset))
+		return dev_err_probe(dev, PTR_ERR(ts->reset), "reset GPIO\n");
+	ts->vcl = devm_gpiod_get(dev, "vcl", GPIOD_OUT_LOW);
+	if (IS_ERR(ts->vcl))
+		return dev_err_probe(dev, PTR_ERR(ts->vcl), "3.3 V enable GPIO\n");
+	ts->vdd = devm_gpiod_get(dev, "vdd", GPIOD_OUT_LOW);
+	if (IS_ERR(ts->vdd))
+		return dev_err_probe(dev, PTR_ERR(ts->vdd), "1.8 V enable GPIO\n");
+	ret = devm_add_action_or_reset(dev, sw42902_power_off, ts);
+	if (ret)
+		return ret;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+	ts->input = input;
+	input->name = "Silicon Works SW42902";
+	input->id.bustype = BUS_I2C;
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, 1079, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 2459, 0, 0);
+	input_set_abs_params(input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+	input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 16383, 0, 0);
+	input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 16383, 0, 0);
+	touchscreen_parse_properties(input, true, &ts->prop);
+	ret = input_mt_init_slots(input, SW42902_MAX_CONTACTS,
+				  INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (ret)
+		return ret;
+	ret = devm_request_threaded_irq(dev, client->irq, NULL, sw42902_irq,
+					IRQF_ONESHOT | IRQF_NO_AUTOEN,
+					dev_name(dev), ts);
+	if (ret)
+		return dev_err_probe(dev, ret, "interrupt request failed\n");
+
+	sw42902_power_on(ts);
+	ret = sw42902_start(ts);
+	if (ret)
+		return dev_err_probe(dev, ret, "controller initialization failed\n");
+	ret = input_register_device(input);
+	if (ret)
+		return ret;
+	enable_irq(client->irq);
+	dev_info(dev, "SW42902 initialized using existing flash firmware\n");
+	return 0;
+}
+
+static int sw42902_suspend(struct device *dev)
+{
+	struct sw42902 *ts = i2c_get_clientdata(to_i2c_client(dev));
+
+	disable_irq(ts->client->irq);
+	sw42902_release_contacts(ts);
+	sw42902_write(ts, SW42902_DRIVING_CTL, SW42902_DRIVING_STOP);
+	sw42902_power_off(ts);
+	return 0;
+}
+
+static int sw42902_resume(struct device *dev)
+{
+	struct sw42902 *ts = i2c_get_clientdata(to_i2c_client(dev));
+	int ret;
+
+	sw42902_power_on(ts);
+	ret = sw42902_start(ts);
+	if (ret) {
+		sw42902_power_off(ts);
+		return ret;
+	}
+	enable_irq(ts->client->irq);
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(sw42902_pm_ops, sw42902_suspend, sw42902_resume);
+
+static const struct of_device_id sw42902_of_match[] = {
+	{ .compatible = "lg,sw42902" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sw42902_of_match);
+
+static const struct i2c_device_id sw42902_ids[] = {
+	{ "sw42902" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sw42902_ids);
+
+static struct i2c_driver sw42902_driver = {
+	.driver = {
+		.name = "sw42902",
+		.of_match_table = sw42902_of_match,
+		.pm = pm_sleep_ptr(&sw42902_pm_ops),
+	},
+	.probe = sw42902_probe,
+	.id_table = sw42902_ids,
+};
+module_i2c_driver(sw42902_driver);
+
+MODULE_DESCRIPTION("Silicon Works SW42902 touchscreen driver");
+MODULE_LICENSE("GPL");
-- 
2.39.5


  parent reply	other threads:[~2026-11-17 12:39 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 12:39 [PATCH v1 00/11] arm64: qcom: Add initial support for LG V60 ThinQ 5G (timelm) rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 01/11] dt-bindings: arm: qcom: add " rofikkerneldev
2026-11-17 12:47   ` sashiko-bot
2026-11-17 12:39 ` [PATCH v1 02/11] arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support rofikkerneldev
2026-11-17 13:06   ` sashiko-bot
2026-11-17 12:39 ` [PATCH v1 03/11] arm64: dts: qcom: sm8250-lge-timelm: add reserved memory regions rofikkerneldev
2026-11-17 12:57   ` sashiko-bot
2026-11-17 12:39 ` [PATCH v1 04/11] dt-bindings: display: panel: add LG SW43103 rofikkerneldev
2026-11-17 12:51   ` sashiko-bot
2026-11-17 12:39 ` [PATCH v1 05/11] drm/panel: add LG SW43103 panel driver rofikkerneldev
2026-11-17 13:04   ` sashiko-bot
2026-11-17 12:39 ` [PATCH v1 06/11] dt-bindings: input: touchscreen: add Silicon Works SW42902 rofikkerneldev
2026-11-17 12:51   ` sashiko-bot
2026-11-17 12:39 ` rofikkerneldev [this message]
2026-11-17 13:01   ` [PATCH v1 07/11] Input: touchscreen: add Silicon Works SW42902 support sashiko-bot
2026-11-17 12:39 ` [PATCH v1 08/11] arm64: dts: qcom: sm8250-lge-timelm: enable SW43103 panel rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 09/11] arm64: dts: qcom: sm8250-lge-timelm: add SW42902 touchscreen rofikkerneldev
2026-11-17 12:56   ` sashiko-bot
2026-11-17 12:39 ` [PATCH v1 10/11] arm64: dts: qcom: sm8250-lge-timelm: enable USB Type-C rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 11/11] arm64: dts: qcom: sm8250-lge-timelm: add QCA6390 Bluetooth rofikkerneldev
2026-11-17 13:09   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117123946.668557-8-rofikcoga@gmail.com \
    --to=rofikcoga@gmail.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox