From: "Duane Griffin" <duaneg@dghda.com>
To: akpm@linux-foundation.org
Cc: Andreas Dilger <adilger@sun.com>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
linux-ext4@vger.kernel.org, linux-kernel@vger.kernel.org,
Duane Griffin <duaneg@dghda.com>
Subject: [PATCH 4/6] ext2: tighten restrictions on inode flags
Date: Thu, 19 Jun 2008 16:42:03 +0100 [thread overview]
Message-ID: <1213890125-20186-5-git-send-email-duaneg@dghda.com> (raw)
In-Reply-To: <1213890125-20186-4-git-send-email-duaneg@dghda.com>
At the moment there are few restrictions on which flags may be set on which
inodes. Specifically DIRSYNC may only be set on directories and IMMUTABLE
and APPEND may not be set on links. Tighten that to disallow TOPDIR being
set on non-directories and SECRM, UNRM, COMPR, SYNC, DIRTY, COMPRBLK,
NOCOMP, ECOMPR, INDEX, JOURNAL_DATA and NOTAIL being set on anything but
regular files or directories.
Introduce a flags masking function which masks flags based on mode and use
it during inode creation and when flags are set via the ioctl to facilitate
future consistency.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
--
This is v2 with types corrected, as suggested by Aneesh.
The specific flags masked out here are those suggested by Andreas, as well
as IMMUTABLE, which I included to match the behaviour of the existing code.
---
fs/ext2/ialloc.c | 8 ++------
fs/ext2/ioctl.c | 3 +--
include/linux/ext2_fs.h | 22 ++++++++++++++++++++++
3 files changed, 25 insertions(+), 8 deletions(-)
diff --git a/fs/ext2/ialloc.c b/fs/ext2/ialloc.c
index a51d4ca..1559b8e 100644
--- a/fs/ext2/ialloc.c
+++ b/fs/ext2/ialloc.c
@@ -565,12 +565,8 @@ got:
inode->i_blocks = 0;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
memset(ei->i_data, 0, sizeof(ei->i_data));
- ei->i_flags = EXT2_I(dir)->i_flags & EXT2_FL_INHERITED;
- if (S_ISLNK(mode))
- ei->i_flags &= ~(EXT2_IMMUTABLE_FL|EXT2_APPEND_FL);
- /* dirsync is only applied to directories */
- if (!S_ISDIR(mode))
- ei->i_flags &= ~EXT2_DIRSYNC_FL;
+ ei->i_flags =
+ ext2_mask_flags(mode, EXT2_I(dir)->i_flags & EXT2_FL_INHERITED);
ei->i_faddr = 0;
ei->i_frag_no = 0;
ei->i_frag_size = 0;
diff --git a/fs/ext2/ioctl.c b/fs/ext2/ioctl.c
index de876fa..7cb4bad 100644
--- a/fs/ext2/ioctl.c
+++ b/fs/ext2/ioctl.c
@@ -50,8 +50,7 @@ long ext2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
goto setflags_out;
}
- if (!S_ISDIR(inode->i_mode))
- flags &= ~EXT2_DIRSYNC_FL;
+ flags = ext2_mask_flags(inode->i_mode, flags);
mutex_lock(&inode->i_mutex);
/* Is it quota file? Do not allow user to mess with it */
diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h
index 7ead7eb..80a604a 100644
--- a/include/linux/ext2_fs.h
+++ b/include/linux/ext2_fs.h
@@ -201,6 +201,28 @@ struct ext2_group_desc
EXT2_NOCOMP_FL | EXT2_JOURNAL_DATA_FL |\
EXT2_NOTAIL_FL | EXT2_DIRSYNC_FL)
+/* Flags that are inappropriate for regular files. */
+#define EXT2_REG_FLMASK (EXT2_DIRSYNC_FL | EXT2_TOPDIR_FL)
+
+/* Flags that are inappropriate for non-directories/regular files. */
+#define EXT2_OTHER_FLMASK (EXT2_SECRM_FL | EXT2_UNRM_FL | EXT2_COMPR_FL |\
+ EXT2_SYNC_FL | EXT2_IMMUTABLE_FL | EXT2_APPEND_FL |\
+ EXT2_DIRTY_FL | EXT2_COMPRBLK_FL | EXT2_NOCOMP_FL |\
+ EXT2_ECOMPR_FL | EXT2_INDEX_FL |\
+ EXT2_JOURNAL_DATA_FL | EXT2_NOTAIL_FL |\
+ EXT2_DIRSYNC_FL | EXT2_TOPDIR_FL)
+
+/* Mask out flags that are inappropriate for the given type of inode. */
+static inline __u32 ext2_mask_flags(umode_t mode, __u32 flags)
+{
+ if (S_ISDIR(mode))
+ return flags;
+ else if (S_ISREG(mode))
+ return flags & ~EXT2_REG_FLMASK;
+ else
+ return flags & ~EXT2_OTHER_FLMASK;
+}
+
/*
* ioctl commands
*/
--
1.5.4.5
next prev parent reply other threads:[~2008-06-19 15:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-19 15:41 [PATCH 0/6][v3] ext{2,3,4}: tighten inheritance and setting of inode flags Duane Griffin
2008-06-19 15:42 ` [PATCH 1/6] ext2: don't inherit inappropriate inode flags from parent Duane Griffin
2008-06-19 15:42 ` [PATCH 2/6] ext3: " Duane Griffin
2008-06-19 15:42 ` [PATCH 3/6] ext4: " Duane Griffin
2008-06-19 15:42 ` Duane Griffin [this message]
2008-06-19 15:42 ` [PATCH 5/6] ext3: tighten restrictions on inode flags Duane Griffin
2008-06-19 15:42 ` [PATCH 6/6] ext4: " Duane Griffin
-- strict thread matches above, loose matches on Subject: below --
2008-12-03 19:54 [PATCH 0/6][REPOST] ext{2,3,4}: tighten inheritance and setting of " Duane Griffin
2008-12-03 19:54 ` [PATCH 1/6] ext2: don't inherit inappropriate inode flags from parent Duane Griffin
2008-12-03 19:54 ` [PATCH 2/6] ext3: " Duane Griffin
2008-12-03 19:55 ` [PATCH 3/6] ext4: " Duane Griffin
2008-12-03 19:55 ` [PATCH 4/6] ext2: tighten restrictions on inode flags Duane Griffin
2008-06-11 0:04 [PATCH 0/6][v2] ext{2,3,4}: tighten inheritance and setting of " Duane Griffin
2008-06-11 0:04 ` [PATCH 1/6] ext2: don't inherit inappropriate inode flags from parent Duane Griffin
2008-06-11 0:04 ` [PATCH 2/6] ext3: " Duane Griffin
2008-06-11 0:04 ` [PATCH 3/6] ext4: " Duane Griffin
2008-06-11 0:04 ` [PATCH 4/6] ext2: tighten restrictions on inode flags Duane Griffin
2008-06-12 9:06 ` Andreas Dilger
2008-06-12 9:38 ` Duane Griffin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1213890125-20186-5-git-send-email-duaneg@dghda.com \
--to=duaneg@dghda.com \
--cc=adilger@sun.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox