Linux Media Controller development
 help / color / mirror / Atom feed
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: paul.j.murphy@intel.com, daniele.alessandrelli@intel.com,
	linux-media@vger.kernel.org
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH 12/16] media: i2c: ov9282: Make V4L2_CID_HBLANK r/w
Date: Wed,  5 Oct 2022 16:28:05 +0100	[thread overview]
Message-ID: <20221005152809.3785786-13-dave.stevenson@raspberrypi.com> (raw)
In-Reply-To: <20221005152809.3785786-1-dave.stevenson@raspberrypi.com>

There's no reason why HBLANK has to be read-only as it
only changes the TIMING_HTS register in the sensor.

Remove the READ_ONLY flag, and add the relevant handling
for it.

The minimum value also varies based on whether continuous clock
mode is being used or not, so allow hblank_min to depend on
that.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/ov9282.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index 12cbe401fd78..8e86aa7e4b2a 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -22,6 +22,9 @@
 #define OV9282_MODE_STANDBY	0x00
 #define OV9282_MODE_STREAMING	0x01
 
+#define OV9282_REG_TIMING_HTS	0x380c
+#define OV9282_TIMING_HTS_MAX	0x7fff
+
 /* Lines per frame */
 #define OV9282_REG_LPFR		0x380e
 
@@ -99,7 +102,8 @@ struct ov9282_reg_list {
  * struct ov9282_mode - ov9282 sensor mode structure
  * @width: Frame width
  * @height: Frame height
- * @hblank: Horizontal blanking in lines
+ * @hblank_min: Minimum horizontal blanking in lines for non-continuous[0] and
+ *		continuous[1] clock modes
  * @vblank: Vertical blanking in lines
  * @vblank_min: Minimum vertical blanking in lines
  * @vblank_max: Maximum vertical blanking in lines
@@ -109,7 +113,7 @@ struct ov9282_reg_list {
 struct ov9282_mode {
 	u32 width;
 	u32 height;
-	u32 hblank;
+	u32 hblank_min[2];
 	u32 vblank;
 	u32 vblank_min;
 	u32 vblank_max;
@@ -249,8 +253,6 @@ static const struct ov9282_reg mode_1280x720_regs[] = {
 	{0x3809, 0x00},
 	{0x380a, 0x02},
 	{0x380b, 0xd0},
-	{0x380c, 0x02},
-	{0x380d, 0xfd},
 	{0x3810, 0x00},
 	{0x3811, 0x08},
 	{0x3812, 0x00},
@@ -273,7 +275,7 @@ static const struct ov9282_mode supported_modes[] = {
 	{
 		.width = 1280,
 		.height = 720,
-		.hblank = 250,
+		.hblank_min = { 250, 176 },
 		.vblank = 1022,
 		.vblank_min = 41,
 		.vblank_max = 51540,
@@ -399,15 +401,17 @@ static int ov9282_write_regs(struct ov9282 *ov9282,
 static int ov9282_update_controls(struct ov9282 *ov9282,
 				  const struct ov9282_mode *mode)
 {
+	u32 hblank_min;
 	int ret;
 
 	ret = __v4l2_ctrl_s_ctrl(ov9282->link_freq_ctrl, mode->link_freq_idx);
 	if (ret)
 		return ret;
 
-	ret = __v4l2_ctrl_s_ctrl(ov9282->hblank_ctrl, mode->hblank);
-	if (ret)
-		return ret;
+	hblank_min = mode->hblank_min[ov9282->noncontinuous_clock ? 0 : 1];
+	ret =  __v4l2_ctrl_modify_range(ov9282->hblank_ctrl, hblank_min,
+					OV9282_TIMING_HTS_MAX - mode->width, 1,
+					hblank_min);
 
 	return __v4l2_ctrl_modify_range(ov9282->vblank_ctrl, mode->vblank_min,
 					mode->vblank_max, 1, mode->vblank);
@@ -539,6 +543,10 @@ static int ov9282_set_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_VFLIP:
 		ret = ov9282_set_ctrl_vflip(ov9282, ctrl->val);
 		break;
+	case V4L2_CID_HBLANK:
+		ret = ov9282_write_reg(ov9282, OV9282_REG_TIMING_HTS, 2,
+				       (ctrl->val + ov9282->cur_mode->width) >> 1);
+		break;
 	default:
 		dev_err(ov9282->dev, "Invalid control %d", ctrl->id);
 		ret = -EINVAL;
@@ -1033,6 +1041,7 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
 	struct v4l2_ctrl_handler *ctrl_hdlr = &ov9282->ctrl_handler;
 	const struct ov9282_mode *mode = ov9282->cur_mode;
 	struct v4l2_fwnode_device_properties props;
+	u32 hblank_min;
 	u32 lpfr;
 	int ret;
 
@@ -1091,14 +1100,13 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
 	if (ov9282->link_freq_ctrl)
 		ov9282->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 
+	hblank_min = mode->hblank_min[ov9282->noncontinuous_clock ? 0 : 1];
 	ov9282->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
 						&ov9282_ctrl_ops,
 						V4L2_CID_HBLANK,
-						OV9282_REG_MIN,
-						OV9282_REG_MAX,
-						1, mode->hblank);
-	if (ov9282->hblank_ctrl)
-		ov9282->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+						hblank_min,
+						OV9282_TIMING_HTS_MAX - mode->width,
+						1, hblank_min);
 
 	ret = v4l2_fwnode_device_parse(ov9282->dev, &props);
 	if (!ret) {
-- 
2.34.1


  parent reply	other threads:[~2022-10-05 15:29 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-05 15:27 [PATCH 00/16] Updates to ov9282 sensor driver Dave Stevenson
2022-10-05 15:27 ` [PATCH 01/16] media: i2c: ov9282: Remove duplication of registers Dave Stevenson
2022-10-06  9:14   ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 02/16] media: i2c: ov9282: Split registers into common and mode specific Dave Stevenson
2022-10-06  9:15   ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 03/16] media: i2c: ov9282: Remove format code from the mode Dave Stevenson
2022-10-06  9:15   ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 04/16] media: i2c: ov9282: Remove pixel rate from mode definition Dave Stevenson
2022-10-06  9:17   ` Jacopo Mondi
2022-10-06 11:51     ` Dave Stevenson
2022-10-05 15:27 ` [PATCH 05/16] media: i2c: ov9281: Support more than 1 mode Dave Stevenson
2022-10-06  9:18   ` Jacopo Mondi
2022-10-26  7:22   ` Sakari Ailus
2022-10-05 15:27 ` [PATCH 06/16] media: i2c: ov9282: Correct HTS register for configured pixel rate Dave Stevenson
2022-10-06  9:23   ` Jacopo Mondi
2022-10-06 13:01     ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 07/16] media: i2c: ov9282: Reduce vblank_min values based on testing Dave Stevenson
2022-10-06 11:56   ` Jacopo Mondi
2022-10-06 13:02     ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 08/16] media: i2c: ov9282: Add selection for CSI2 clock mode Dave Stevenson
2022-10-06  9:24   ` Jacopo Mondi
2022-10-26  7:21   ` Sakari Ailus
2022-10-28 12:57     ` Dave Stevenson
2022-10-28 14:30       ` Sakari Ailus
2022-10-28 15:03         ` Dave Stevenson
2022-10-31 13:06           ` Sakari Ailus
2022-10-05 15:28 ` [PATCH 09/16] media: i2c: ov9282: Add the properties from fwnode Dave Stevenson
2022-10-06 11:57   ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 10/16] media: i2c: ov9282: Action CID_VBLANK when set Dave Stevenson
2022-10-06  9:29   ` Jacopo Mondi
2022-10-06 13:21     ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 11/16] media: i2c: ov9282: Add HFLIP and VFLIP support Dave Stevenson
2022-10-06  9:38   ` Jacopo Mondi
2022-10-06 14:21     ` Dave Stevenson
2022-10-05 15:28 ` Dave Stevenson [this message]
2022-10-06  9:41   ` [PATCH 12/16] media: i2c: ov9282: Make V4L2_CID_HBLANK r/w Jacopo Mondi
2022-10-06 11:33     ` Dave Stevenson
2022-10-06 11:53       ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 13/16] media: i2c: ov9282: Add selection API calls for cropping info Dave Stevenson
2022-10-06  9:43   ` Jacopo Mondi
2022-10-06 11:39     ` Dave Stevenson
2022-10-06 11:54       ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 14/16] media: i2c: ov9282: Add support for 1280x800 and 640x400 modes Dave Stevenson
2022-10-06  9:48   ` Jacopo Mondi
2022-10-06 11:46     ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 15/16] media: i2c: ov9282: Add support for 8bit readout Dave Stevenson
2022-10-06  9:57   ` Jacopo Mondi
2022-10-06 12:20     ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 16/16] media: i2c: ov9282: Support event handlers Dave Stevenson
2022-10-06  9:59   ` Jacopo Mondi
2022-10-07 10:22     ` Dave Stevenson
2022-10-07 12:57       ` Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221005152809.3785786-13-dave.stevenson@raspberrypi.com \
    --to=dave.stevenson@raspberrypi.com \
    --cc=daniele.alessandrelli@intel.com \
    --cc=linux-media@vger.kernel.org \
    --cc=paul.j.murphy@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox