From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: paul.j.murphy@intel.com, daniele.alessandrelli@intel.com,
linux-media@vger.kernel.org
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH 03/16] media: i2c: ov9282: Remove format code from the mode
Date: Wed, 5 Oct 2022 16:27:56 +0100 [thread overview]
Message-ID: <20221005152809.3785786-4-dave.stevenson@raspberrypi.com> (raw)
In-Reply-To: <20221005152809.3785786-1-dave.stevenson@raspberrypi.com>
The format code is independent of mode, and each mode could
support both Y10 and Y8, so disassociate the code from the
mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/media/i2c/ov9282.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index 9842080cf66f..1c77b77427f0 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -88,7 +88,6 @@ struct ov9282_reg_list {
* struct ov9282_mode - ov9282 sensor mode structure
* @width: Frame width
* @height: Frame height
- * @code: Format code
* @hblank: Horizontal blanking in lines
* @vblank: Vertical blanking in lines
* @vblank_min: Minimum vertical blanking in lines
@@ -100,7 +99,6 @@ struct ov9282_reg_list {
struct ov9282_mode {
u32 width;
u32 height;
- u32 code;
u32 hblank;
u32 vblank;
u32 vblank_min;
@@ -273,7 +271,6 @@ static const struct ov9282_mode supported_mode = {
.vblank_max = 51540,
.pclk = 160000000,
.link_freq_idx = 0,
- .code = MEDIA_BUS_FMT_Y10_1X10,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_1280x720_regs),
.regs = mode_1280x720_regs,
@@ -523,7 +520,7 @@ static int ov9282_enum_mbus_code(struct v4l2_subdev *sd,
if (code->index > 0)
return -EINVAL;
- code->code = supported_mode.code;
+ code->code = MEDIA_BUS_FMT_Y10_1X10;
return 0;
}
@@ -543,7 +540,7 @@ static int ov9282_enum_frame_size(struct v4l2_subdev *sd,
if (fsize->index > 0)
return -EINVAL;
- if (fsize->code != supported_mode.code)
+ if (fsize->code != MEDIA_BUS_FMT_Y10_1X10)
return -EINVAL;
fsize->min_width = supported_mode.width;
@@ -567,7 +564,7 @@ static void ov9282_fill_pad_format(struct ov9282 *ov9282,
{
fmt->format.width = mode->width;
fmt->format.height = mode->height;
- fmt->format.code = mode->code;
+ fmt->format.code = MEDIA_BUS_FMT_Y10_1X10;
fmt->format.field = V4L2_FIELD_NONE;
fmt->format.colorspace = V4L2_COLORSPACE_RAW;
fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
--
2.34.1
next prev parent reply other threads:[~2022-10-05 15:28 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-05 15:27 [PATCH 00/16] Updates to ov9282 sensor driver Dave Stevenson
2022-10-05 15:27 ` [PATCH 01/16] media: i2c: ov9282: Remove duplication of registers Dave Stevenson
2022-10-06 9:14 ` Jacopo Mondi
2022-10-05 15:27 ` [PATCH 02/16] media: i2c: ov9282: Split registers into common and mode specific Dave Stevenson
2022-10-06 9:15 ` Jacopo Mondi
2022-10-05 15:27 ` Dave Stevenson [this message]
2022-10-06 9:15 ` [PATCH 03/16] media: i2c: ov9282: Remove format code from the mode Jacopo Mondi
2022-10-05 15:27 ` [PATCH 04/16] media: i2c: ov9282: Remove pixel rate from mode definition Dave Stevenson
2022-10-06 9:17 ` Jacopo Mondi
2022-10-06 11:51 ` Dave Stevenson
2022-10-05 15:27 ` [PATCH 05/16] media: i2c: ov9281: Support more than 1 mode Dave Stevenson
2022-10-06 9:18 ` Jacopo Mondi
2022-10-26 7:22 ` Sakari Ailus
2022-10-05 15:27 ` [PATCH 06/16] media: i2c: ov9282: Correct HTS register for configured pixel rate Dave Stevenson
2022-10-06 9:23 ` Jacopo Mondi
2022-10-06 13:01 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 07/16] media: i2c: ov9282: Reduce vblank_min values based on testing Dave Stevenson
2022-10-06 11:56 ` Jacopo Mondi
2022-10-06 13:02 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 08/16] media: i2c: ov9282: Add selection for CSI2 clock mode Dave Stevenson
2022-10-06 9:24 ` Jacopo Mondi
2022-10-26 7:21 ` Sakari Ailus
2022-10-28 12:57 ` Dave Stevenson
2022-10-28 14:30 ` Sakari Ailus
2022-10-28 15:03 ` Dave Stevenson
2022-10-31 13:06 ` Sakari Ailus
2022-10-05 15:28 ` [PATCH 09/16] media: i2c: ov9282: Add the properties from fwnode Dave Stevenson
2022-10-06 11:57 ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 10/16] media: i2c: ov9282: Action CID_VBLANK when set Dave Stevenson
2022-10-06 9:29 ` Jacopo Mondi
2022-10-06 13:21 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 11/16] media: i2c: ov9282: Add HFLIP and VFLIP support Dave Stevenson
2022-10-06 9:38 ` Jacopo Mondi
2022-10-06 14:21 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 12/16] media: i2c: ov9282: Make V4L2_CID_HBLANK r/w Dave Stevenson
2022-10-06 9:41 ` Jacopo Mondi
2022-10-06 11:33 ` Dave Stevenson
2022-10-06 11:53 ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 13/16] media: i2c: ov9282: Add selection API calls for cropping info Dave Stevenson
2022-10-06 9:43 ` Jacopo Mondi
2022-10-06 11:39 ` Dave Stevenson
2022-10-06 11:54 ` Jacopo Mondi
2022-10-05 15:28 ` [PATCH 14/16] media: i2c: ov9282: Add support for 1280x800 and 640x400 modes Dave Stevenson
2022-10-06 9:48 ` Jacopo Mondi
2022-10-06 11:46 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 15/16] media: i2c: ov9282: Add support for 8bit readout Dave Stevenson
2022-10-06 9:57 ` Jacopo Mondi
2022-10-06 12:20 ` Dave Stevenson
2022-10-05 15:28 ` [PATCH 16/16] media: i2c: ov9282: Support event handlers Dave Stevenson
2022-10-06 9:59 ` Jacopo Mondi
2022-10-07 10:22 ` Dave Stevenson
2022-10-07 12:57 ` Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221005152809.3785786-4-dave.stevenson@raspberrypi.com \
--to=dave.stevenson@raspberrypi.com \
--cc=daniele.alessandrelli@intel.com \
--cc=linux-media@vger.kernel.org \
--cc=paul.j.murphy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox