[PATCH 05/16] media: i2c: ov9281: Support more than 1 mode.

[Dave Stevenson <dave.stevenson@raspberrypi.com>]

The driver currently has multiple assumptions that there is
only one supported mode.

Convert supported_mode to an array, and fix up all references
to correctly look at that array.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/ov9282.c | 44 ++++++++++++++++++++++----------------
 1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index 798ff8ba50bd..f7823d584522 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -262,20 +262,24 @@ static const struct ov9282_reg mode_1280x720_regs[] = {
 };
 
 /* Supported sensor mode configurations */
-static const struct ov9282_mode supported_mode = {
-	.width = 1280,
-	.height = 720,
-	.hblank = 250,
-	.vblank = 1022,
-	.vblank_min = 151,
-	.vblank_max = 51540,
-	.link_freq_idx = 0,
-	.reg_list = {
-		.num_of_regs = ARRAY_SIZE(mode_1280x720_regs),
-		.regs = mode_1280x720_regs,
+static const struct ov9282_mode supported_modes[] = {
+	{
+		.width = 1280,
+		.height = 720,
+		.hblank = 250,
+		.vblank = 1022,
+		.vblank_min = 151,
+		.vblank_max = 51540,
+		.link_freq_idx = 0,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_1280x720_regs),
+			.regs = mode_1280x720_regs,
+		},
 	},
 };
 
+#define OV9282_NUM_MODES ARRAY_SIZE(supported_modes)
+
 /**
  * to_ov9282() - ov9282 V4L2 sub-device to ov9282 device.
  * @subdev: pointer to ov9282 V4L2 sub-device
@@ -536,15 +540,15 @@ static int ov9282_enum_frame_size(struct v4l2_subdev *sd,
 				  struct v4l2_subdev_state *sd_state,
 				  struct v4l2_subdev_frame_size_enum *fsize)
 {
-	if (fsize->index > 0)
+	if (fsize->index >= OV9282_NUM_MODES)
 		return -EINVAL;
 
 	if (fsize->code != MEDIA_BUS_FMT_Y10_1X10)
 		return -EINVAL;
 
-	fsize->min_width = supported_mode.width;
+	fsize->min_width = supported_modes[fsize->index].width;
 	fsize->max_width = fsize->min_width;
-	fsize->min_height = supported_mode.height;
+	fsize->min_height = supported_modes[fsize->index].height;
 	fsize->max_height = fsize->min_height;
 
 	return 0;
@@ -619,7 +623,11 @@ static int ov9282_set_pad_format(struct v4l2_subdev *sd,
 
 	mutex_lock(&ov9282->mutex);
 
-	mode = &supported_mode;
+	mode = v4l2_find_nearest_size(supported_modes,
+				      OV9282_NUM_MODES,
+				      width, height,
+				      fmt->format.width,
+				      fmt->format.height);
 	ov9282_fill_pad_format(ov9282, mode, fmt);
 
 	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
@@ -652,7 +660,7 @@ static int ov9282_init_pad_cfg(struct v4l2_subdev *sd,
 	struct v4l2_subdev_format fmt = { 0 };
 
 	fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
-	ov9282_fill_pad_format(ov9282, &supported_mode, &fmt);
+	ov9282_fill_pad_format(ov9282, &supported_modes[0], &fmt);
 
 	return ov9282_set_pad_format(sd, sd_state, &fmt);
 }
@@ -1081,8 +1089,8 @@ static int ov9282_probe(struct i2c_client *client)
 		goto error_power_off;
 	}
 
-	/* Set default mode to max resolution */
-	ov9282->cur_mode = &supported_mode;
+	/* Set default mode to first mode */
+	ov9282->cur_mode = &supported_modes[0];
 	ov9282->vblank = ov9282->cur_mode->vblank;
 
 	ret = ov9282_init_controls(ov9282);
-- 
2.34.1